static int
PrintBOM (void)
{
char utcTime[64];
Coord x, y;
double theta = 0.0;
double sumx, sumy;
int pinfound[MAXREFPINS];
double pinx[MAXREFPINS];
double piny[MAXREFPINS];
double pinangle[MAXREFPINS];
double padcentrex, padcentrey;
double centroidx, centroidy;
double pin1x, pin1y;
int pin_cnt;
int found_any_not_at_centroid;
int found_any;
time_t currenttime;
FILE *fp;
BomList *bom = NULL;
char *name, *descr, *value,*fixed_rotation;
int rpindex;
fp = fopen (xy_filename, "w");
if (!fp)
{
gui->log ("Cannot open file %s for writing\n", xy_filename);
return 1;
}
/* Create a portable timestamp. */
currenttime = time (NULL);
{
/* avoid gcc complaints */
const char *fmt = "%c UTC";
strftime (utcTime, sizeof (utcTime), fmt, gmtime (¤ttime));
}
fprintf (fp, "# PcbXY Version 1.0\n");
fprintf (fp, "# Date: %s\n", utcTime);
fprintf (fp, "# Author: %s\n", pcb_author ());
fprintf (fp, "# Title: %s - PCB X-Y\n", UNKNOWN (PCB->Name));
fprintf (fp, "# RefDes, Description, Value, X, Y, rotation, top/bottom\n");
/* don't use localized xy_unit->in_suffix here since */
/* the line itself is not localized and not for GUI */
fprintf (fp, "# X,Y in %s. rotation in degrees.\n", xy_unit->suffix);
fprintf (fp, "# --------------------------------------------\n");
/*
* For each element we calculate the centroid of the footprint.
* In addition, we need to extract some notion of rotation.
* While here generate the BOM list
*/
ELEMENT_LOOP (PCB->Data);
{
/* Initialize our pin count and our totals for finding the centroid. */
pin_cnt = 0;
sumx = 0.0;
sumy = 0.0;
for (rpindex = 0; rpindex < MAXREFPINS; rpindex++)
pinfound[rpindex] = 0;
/* Insert this component into the bill of materials list. */
bom = bom_insert ((char *)UNKNOWN (NAMEONPCB_NAME (element)),
(char *)UNKNOWN (DESCRIPTION_NAME (element)),
(char *)UNKNOWN (VALUE_NAME (element)), bom);
/*
* Iterate over the pins and pads keeping a running count of how
* many pins/pads total and the sum of x and y coordinates
*
* While we're at it, store the location of pin/pad #1 and #2 if
* we can find them.
*/
PIN_LOOP (element);
{
sumx += (double) pin->X;
sumy += (double) pin->Y;
pin_cnt++;
for (rpindex = 0; reference_pin_names[rpindex]; rpindex++)
{
if (NSTRCMP (pin->Number, reference_pin_names[rpindex]) == 0)
{
pinx[rpindex] = (double) pin->X;
piny[rpindex] = (double) pin->Y;
pinangle[rpindex] = 0.0; /* pins have no notion of angle */
pinfound[rpindex] = 1;
}
}
}
END_LOOP;
PAD_LOOP (element);
{
sumx += (pad->Point1.X + pad->Point2.X) / 2.0;
sumy += (pad->Point1.Y + pad->Point2.Y) / 2.0;
pin_cnt++;
for (rpindex = 0; reference_pin_names[rpindex]; rpindex++)
{
if (NSTRCMP (pad->Number, reference_pin_names[rpindex]) == 0)
{
padcentrex = (double) (pad->Point1.X + pad->Point2.X) / 2.0;
padcentrey = (double) (pad->Point1.Y + pad->Point2.Y) / 2.0;
pinx[rpindex] = padcentrex;
piny[rpindex] = padcentrey;
/*
* NOTE: We swap the Y points because in PCB, the Y-axis
* is inverted. Increasing Y moves down. We want to deal
* in the usual increasing Y moves up coordinates though.
*/
pinangle[rpindex] = (180.0 / M_PI) * atan2 (pad->Point1.Y - pad->Point2.Y,
pad->Point2.X - pad->Point1.X);
pinfound[rpindex]=1;
}
}
}
END_LOOP;
if (pin_cnt > 0)
{
centroidx = sumx / (double) pin_cnt;
centroidy = sumy / (double) pin_cnt;
if (NSTRCMP( AttributeGetFromList (&element->Attributes,"xy-centre"), "origin") == 0 )
{
x = element->MarkX;
y = element->MarkY;
}
else
{
x = centroidx;
y = centroidy;
}
fixed_rotation = AttributeGetFromList (&element->Attributes, "xy-fixed-rotation");
if (fixed_rotation)
{
/* The user specified a fixed rotation */
theta = atof (fixed_rotation);
found_any_not_at_centroid = 1;
found_any = 1;
}
else
{
/* Find first reference pin not at the centroid */
found_any_not_at_centroid = 0;
found_any = 0;
theta = 0.0;
for (rpindex = 0;
reference_pin_names[rpindex] && !found_any_not_at_centroid;
rpindex++)
{
if (pinfound[rpindex])
{
found_any = 1;
/* Recenter pin "#1" onto the axis which cross at the part
centroid */
pin1x = pinx[rpindex] - x;
pin1y = piny[rpindex] - y;
/* flip x, to reverse rotation for elements on back */
if (FRONT (element) != 1)
pin1x = -pin1x;
/* if only 1 pin, use pin 1's angle */
if (pin_cnt == 1)
{
theta = pinangle[rpindex];
found_any_not_at_centroid = 1;
}
else if ((pin1x != 0.0) || (pin1y != 0.0))
{
theta = xyToAngle (pin1x, pin1y, pin_cnt > 2);
found_any_not_at_centroid = 1;
}
}
}
if (!found_any)
{
Message
("PrintBOM(): unable to figure out angle because I could\n"
" not find a suitable reference pin of element %s\n"
" Setting to %g degrees\n",
UNKNOWN (NAMEONPCB_NAME (element)), theta);
}
else if (!found_any_not_at_centroid)
{
Message
("PrintBOM(): unable to figure out angle of element\n"
" %s because the reference pin(s) are at the centroid of the part.\n"
" Setting to %g degrees\n",
UNKNOWN (NAMEONPCB_NAME (element)), theta);
}
}
name = CleanBOMString ((char *)UNKNOWN (NAMEONPCB_NAME (element)));
descr = CleanBOMString ((char *)UNKNOWN (DESCRIPTION_NAME (element)));
value = CleanBOMString ((char *)UNKNOWN (VALUE_NAME (element)));
y = PCB->MaxHeight - y;
pcb_fprintf (fp, "%m+%s,\"%s\",\"%s\",%.2mS,%.2mS,%g,%s\n",
xy_unit->allow, name, descr, value, x, y,
theta, FRONT (element) == 1 ? "top" : "bottom");
free (name);
free (descr);
free (value);
}
}
END_LOOP;
fclose (fp);
/* Now print out a Bill of Materials file */
fp = fopen (bom_filename, "w");
if (!fp)
{
gui->log ("Cannot open file %s for writing\n", bom_filename);
print_and_free (NULL, bom);
return 1;
}
fprintf (fp, "# PcbBOM Version 1.0\n");
fprintf (fp, "# Date: %s\n", utcTime);
fprintf (fp, "# Author: %s\n", pcb_author ());
fprintf (fp, "# Title: %s - PCB BOM\n", UNKNOWN (PCB->Name));
fprintf (fp, "# Quantity, Description, Value, RefDes\n");
fprintf (fp, "# --------------------------------------------\n");
print_and_free (fp, bom);
fclose (fp);
return (0);
}
static int
PrintBOM (void)
{
char utcTime[64];
Coord x, y;
double theta = 0.0;
double sumx, sumy;
double pin1x = 0.0, pin1y = 0.0, pin1angle = 0.0;
double pin2x = 0.0, pin2y = 0.0;
int found_pin1;
int found_pin2;
int pin_cnt;
time_t currenttime;
FILE *fp;
BomList *bom = NULL;
char *name, *descr, *value;
fp = fopen (xy_filename, "w");
if (!fp)
{
gui->log ("Cannot open file %s for writing\n", xy_filename);
return 1;
}
/* Create a portable timestamp. */
currenttime = time (NULL);
{
/* avoid gcc complaints */
const char *fmt = "%c UTC";
strftime (utcTime, sizeof (utcTime), fmt, gmtime (¤ttime));
}
fprintf (fp, "# PcbXY Version 1.0\n");
fprintf (fp, "# Date: %s\n", utcTime);
fprintf (fp, "# Author: %s\n", pcb_author ());
fprintf (fp, "# Title: %s - PCB X-Y\n", UNKNOWN (PCB->Name));
fprintf (fp, "# RefDes, Description, Value, X, Y, rotation, top/bottom\n");
fprintf (fp, "# X,Y in %s. rotation in degrees.\n", xy_unit->in_suffix);
fprintf (fp, "# --------------------------------------------\n");
/*
* For each element we calculate the centroid of the footprint.
* In addition, we need to extract some notion of rotation.
* While here generate the BOM list
*/
ELEMENT_LOOP (PCB->Data);
{
/* initialize our pin count and our totals for finding the
centriod */
pin_cnt = 0;
sumx = 0.0;
sumy = 0.0;
found_pin1 = 0;
found_pin2 = 0;
/* insert this component into the bill of materials list */
bom = bom_insert ((char *)UNKNOWN (NAMEONPCB_NAME (element)),
(char *)UNKNOWN (DESCRIPTION_NAME (element)),
(char *)UNKNOWN (VALUE_NAME (element)), bom);
/*
* iterate over the pins and pads keeping a running count of how
* many pins/pads total and the sum of x and y coordinates
*
* While we're at it, store the location of pin/pad #1 and #2 if
* we can find them
*/
PIN_LOOP (element);
{
sumx += (double) pin->X;
sumy += (double) pin->Y;
pin_cnt++;
if (NSTRCMP (pin->Number, "1") == 0)
{
pin1x = (double) pin->X;
pin1y = (double) pin->Y;
pin1angle = 0.0; /* pins have no notion of angle */
found_pin1 = 1;
}
else if (NSTRCMP (pin->Number, "2") == 0)
{
pin2x = (double) pin->X;
pin2y = (double) pin->Y;
found_pin2 = 1;
}
}
END_LOOP;
PAD_LOOP (element);
{
sumx += (pad->Point1.X + pad->Point2.X) / 2.0;
sumy += (pad->Point1.Y + pad->Point2.Y) / 2.0;
pin_cnt++;
if (NSTRCMP (pad->Number, "1") == 0)
{
pin1x = (double) (pad->Point1.X + pad->Point2.X) / 2.0;
pin1y = (double) (pad->Point1.Y + pad->Point2.Y) / 2.0;
/*
* NOTE: We swap the Y points because in PCB, the Y-axis
* is inverted. Increasing Y moves down. We want to deal
* in the usual increasing Y moves up coordinates though.
*/
pin1angle = (180.0 / M_PI) * atan2 (pad->Point1.Y - pad->Point2.Y,
pad->Point2.X - pad->Point1.X);
found_pin1 = 1;
}
else if (NSTRCMP (pad->Number, "2") == 0)
{
pin2x = (double) (pad->Point1.X + pad->Point2.X) / 2.0;
pin2y = (double) (pad->Point1.Y + pad->Point2.Y) / 2.0;
found_pin2 = 1;
}
}
END_LOOP;
if (pin_cnt > 0)
{
x = sumx / (double) pin_cnt;
y = sumy / (double) pin_cnt;
if (found_pin1)
{
/* recenter pin #1 onto the axis which cross at the part
centroid */
pin1x -= x;
pin1y -= y;
pin1y = -1.0 * pin1y;
/* if only 1 pin, use pin 1's angle */
if (pin_cnt == 1)
theta = pin1angle;
else
{
/* if pin #1 is at (0,0) use pin #2 for rotation */
if ((pin1x == 0.0) && (pin1y == 0.0))
{
if (found_pin2)
theta = xyToAngle (pin2x, pin2y);
else
{
Message
("PrintBOM(): unable to figure out angle of element\n"
" %s because pin #1 is at the centroid of the part.\n"
" and I could not find pin #2's location\n"
" Setting to %g degrees\n",
UNKNOWN (NAMEONPCB_NAME (element)), theta);
}
}
else
theta = xyToAngle (pin1x, pin1y);
}
}
/* we did not find pin #1 */
else
{
theta = 0.0;
Message
("PrintBOM(): unable to figure out angle because I could\n"
" not find pin #1 of element %s\n"
" Setting to %g degrees\n",
UNKNOWN (NAMEONPCB_NAME (element)), theta);
}
name = CleanBOMString ((char *)UNKNOWN (NAMEONPCB_NAME (element)));
descr = CleanBOMString ((char *)UNKNOWN (DESCRIPTION_NAME (element)));
value = CleanBOMString ((char *)UNKNOWN (VALUE_NAME (element)));
y = PCB->MaxHeight - y;
pcb_fprintf (fp, "%m+%s,\"%s\",\"%s\",%mS,%.2mS,%g,%s\n",
xy_unit->allow, name, descr, value, x, y,
theta, FRONT (element) == 1 ? "top" : "bottom");
free (name);
free (descr);
free (value);
}
}
END_LOOP;
fclose (fp);
/* Now print out a Bill of Materials file */
fp = fopen (bom_filename, "w");
if (!fp)
{
gui->log ("Cannot open file %s for writing\n", bom_filename);
print_and_free (NULL, bom);
return 1;
}
fprintf (fp, "# PcbBOM Version 1.0\n");
fprintf (fp, "# Date: %s\n", utcTime);
fprintf (fp, "# Author: %s\n", pcb_author ());
fprintf (fp, "# Title: %s - PCB BOM\n", UNKNOWN (PCB->Name));
fprintf (fp, "# Quantity, Description, Value, RefDes\n");
fprintf (fp, "# --------------------------------------------\n");
print_and_free (fp, bom);
fclose (fp);
return (0);
}