/*Local clock is becoming Master. Table 13 (9.3.5) of the spec.*/
void m1(RunTimeOpts *rtOpts, PtpClock *ptpClock)
{
/*Current data set update*/
ptpClock->stepsRemoved = 0;
clearTime(&ptpClock->offsetFromMaster);
clearTime(&ptpClock->meanPathDelay);
/*Parent data set*/
copyClockIdentity(ptpClock->parentPortIdentity.clockIdentity,
ptpClock->clockIdentity);
ptpClock->parentPortIdentity.portNumber = 0;
ptpClock->parentStats = DEFAULT_PARENTS_STATS;
ptpClock->observedParentClockPhaseChangeRate = 0;
ptpClock->observedParentOffsetScaledLogVariance = 0;
copyClockIdentity(ptpClock->grandmasterIdentity,
ptpClock->clockIdentity);
ptpClock->grandmasterClockQuality.clockAccuracy =
ptpClock->clockQuality.clockAccuracy;
ptpClock->grandmasterClockQuality.clockClass =
ptpClock->clockQuality.clockClass;
ptpClock->grandmasterClockQuality.offsetScaledLogVariance =
ptpClock->clockQuality.offsetScaledLogVariance;
ptpClock->grandmasterPriority1 = ptpClock->priority1;
ptpClock->grandmasterPriority2 = ptpClock->priority2;
/*Time Properties data set*/
ptpClock->timeSource = INTERNAL_OSCILLATOR;
/* UTC vs TAI timescales */
ptpClock->currentUtcOffsetValid = DEFAULT_UTC_VALID;
ptpClock->currentUtcOffset = rtOpts->currentUtcOffset;
}
void initClockVars(RunTimeOpts *rtOpts, PtpClock *ptpClock)
{
DBG("initClockVars:\n");
/* clear vars */
clearTime(&ptpClock->master_to_slave_delay);
clearTime(&ptpClock->slave_to_master_delay);
clearTime(&ptpClock->offset_from_master); /* AKB: 9/18/2007 Clear offset from master */
ptpClock->ofm_filt.y = 0;
ptpClock->ofm_filt.nsec_prev = -1; /* AKB: -1 used for non-valid nsec time */
ptpClock->observed_v1_variance = 0;
ptpClock->observed_drift = 0; /* clears clock servo accumulator (the I term) */
ptpClock->owd_filt.s_exp = 0; /* clears one-way delay filter */
ptpClock->halfEpoch = ptpClock->halfEpoch || rtOpts->halfEpoch;
rtOpts->halfEpoch = 0;
}
/**
* 本地时钟即将进入PTP_MASTER状态
*/
void m1(const RunTimeOpts *rtOpts, PtpClock *ptpClock)
{
/*Current data set update*/
ptpClock->stepsRemoved = 0;
clearTime(&ptpClock->offsetFromMaster);
clearTime(&ptpClock->meanPathDelay);
copyClockIdentity(ptpClock->parentPortIdentity.clockIdentity,
ptpClock->clockIdentity);
ptpClock->parentPortIdentity.portNumber = ptpClock->portIdentity.portNumber;
ptpClock->parentStats = DEFAULT_PARENTS_STATS;
ptpClock->observedParentClockPhaseChangeRate = 0;
ptpClock->observedParentOffsetScaledLogVariance = 0;
copyClockIdentity(ptpClock->grandmasterIdentity,
ptpClock->clockIdentity);
ptpClock->grandmasterClockQuality.clockAccuracy =
ptpClock->clockQuality.clockAccuracy;
ptpClock->grandmasterClockQuality.clockClass =
ptpClock->clockQuality.clockClass;
ptpClock->grandmasterClockQuality.offsetScaledLogVariance =
ptpClock->clockQuality.offsetScaledLogVariance;
ptpClock->grandmasterPriority1 = ptpClock->priority1;
ptpClock->grandmasterPriority2 = ptpClock->priority2;
ptpClock->logMinDelayReqInterval = rtOpts->logMinDelayReqInterval;
/*Time Properties data set*/
ptpClock->timePropertiesDS.currentUtcOffsetValid = rtOpts->timeProperties.currentUtcOffsetValid;
ptpClock->timePropertiesDS.currentUtcOffset = rtOpts->timeProperties.currentUtcOffset;
ptpClock->timePropertiesDS.timeTraceable = rtOpts->timeProperties.timeTraceable;
ptpClock->timePropertiesDS.frequencyTraceable = rtOpts->timeProperties.frequencyTraceable;
ptpClock->timePropertiesDS.ptpTimescale = rtOpts->timeProperties.ptpTimescale;
ptpClock->timePropertiesDS.timeSource = rtOpts->timeProperties.timeSource;
if(ptpClock->timePropertiesDS.ptpTimescale &&
(secondsToMidnight() < rtOpts->leapSecondNoticePeriod)) {
ptpClock->timePropertiesDS.leap59 = ptpClock->clockStatus.leapDelete;
ptpClock->timePropertiesDS.leap61 = ptpClock->clockStatus.leapInsert;
} else {
ptpClock->timePropertiesDS.leap59 = FALSE;
ptpClock->timePropertiesDS.leap61 = FALSE;
}
}
void
initClock(RunTimeOpts * rtOpts, PtpClock * ptpClock)
{
DBG("initClock\n");
#ifdef PTPD_NTPDC
/* If we've been suppressing ntpdc error messages, show them once again */
ptpClock->ntpControl.requestFailed = FALSE;
#endif /* PTPD_NTPDC */
/* do not reset frequency here - restoreDrift will do it if necessary */
#ifdef HAVE_SYS_TIMEX_H
ptpClock->servo.observedDrift = 0;
#endif /* HAVE_SYS_TIMEX_H */
/* clear vars */
/* clean more original filter variables */
clearTime(&ptpClock->offsetFromMaster);
clearTime(&ptpClock->meanPathDelay);
clearTime(&ptpClock->delaySM);
clearTime(&ptpClock->delayMS);
FilterClear(ptpClock->owd_filt); /* clears one-way delay filter */
FilterClear(ptpClock->ofm_filt); /* clears offset from master filter */
rtOpts->offset_first_updated = FALSE;
ptpClock->char_last_msg='I';
reset_operator_messages(rtOpts, ptpClock);
/* For Hybrid mode */
ptpClock->masterAddr = 0;
}
void
initClock(const RunTimeOpts * rtOpts, PtpClock * ptpClock)
{
DBG("initClock\n");
/* If we've been suppressing ntpdc error messages, show them once again */
ptpClock->ntpControl.requestFailed = FALSE;
ptpClock->disabled = rtOpts->portDisabled;
/* do not reset frequency here - restoreDrift will do it if necessary */
/* 2.3.1: restoreDrift now always compiled - this is no longer needed */
#if 0
ptpClock->servo.observedDrift = 0;
#endif
/* clear vars */
/* clean more original filter variables */
clearTime(&ptpClock->offsetFromMaster);
clearTime(&ptpClock->meanPathDelay);
clearTime(&ptpClock->delaySM);
clearTime(&ptpClock->delayMS);
ptpClock->ofm_filt.y = 0;
ptpClock->ofm_filt.nsec_prev = 0;
ptpClock->owd_filt.s_exp = 0; /* clears one-way delay filter */
ptpClock->offsetFirstUpdated = FALSE;
ptpClock->char_last_msg='I';
resetWarnings(rtOpts, ptpClock);
/* For Hybrid mode */
// ptpClock->masterAddr = 0;
ptpClock->maxDelayRejected = 0;
}
void Output::begin() {
Serial.println("Starting Output config");
_matrix = Adafruit_7segment();
_lcd.begin(20,4);
_matrix.begin(0x70);
Serial.print("DEBUG:redPin:");Serial.println(_redPin);
Serial.print("DEBUG:yellowPin:");Serial.println(_yellowPin);
Serial.print("DEBUG:greenPin:");Serial.println(_greenPin);
Serial.print("DEBUG:speakerPin:");Serial.println(_speakerPin);
setReady();
clearTime();
Serial.println("Completed Output config");
noTone(_speakerPin);
}
/* Init ptpClock with run time values (initialization constants are in constants.h)*/
void initData(RunTimeOpts *rtOpts, PtpClock *ptpClock)
{
int i,j;
j=0;
DBG("initData\n");
/* Default data set */
ptpClock->twoStepFlag = TWO_STEP_FLAG;
/*
* init clockIdentity with MAC address and 0xFF and 0xFE. see
* spec 7.5.2.2.2
*/
for (i=0;i<CLOCK_IDENTITY_LENGTH;i++)
{
if (i==3) ptpClock->clockIdentity[i]=0xFF;
else if (i==4) ptpClock->clockIdentity[i]=0xFE;
else
{
ptpClock->clockIdentity[i]=ptpClock->port_uuid_field[j];
j++;
}
}
ptpClock->numberPorts = NUMBER_PORTS;
ptpClock->clockQuality.clockAccuracy =
rtOpts->clockQuality.clockAccuracy;
ptpClock->clockQuality.clockClass = rtOpts->clockQuality.clockClass;
ptpClock->clockQuality.offsetScaledLogVariance =
rtOpts->clockQuality.offsetScaledLogVariance;
ptpClock->priority1 = rtOpts->priority1;
ptpClock->priority2 = rtOpts->priority2;
ptpClock->domainNumber = rtOpts->domainNumber;
ptpClock->slaveOnly = rtOpts->slaveOnly;
if(rtOpts->slaveOnly)
rtOpts->clockQuality.clockClass = SLAVE_ONLY_CLOCK_CLASS;
/* Port configuration data set */
/*
* PortIdentity Init (portNumber = 1 for an ardinary clock spec
* 7.5.2.3)
*/
copyClockIdentity(ptpClock->portIdentity.clockIdentity,
ptpClock->clockIdentity);
ptpClock->portIdentity.portNumber = NUMBER_PORTS;
/* select the initial rate of delayreqs until we receive the first announce message */
ptpClock->logMinDelayReqInterval = rtOpts->initial_delayreq;
clearTime(&ptpClock->peerMeanPathDelay);
ptpClock->logAnnounceInterval = rtOpts->announceInterval;
ptpClock->announceReceiptTimeout = rtOpts->announceReceiptTimeout;
ptpClock->logSyncInterval = rtOpts->syncInterval;
ptpClock->delayMechanism = rtOpts->delayMechanism;
ptpClock->logMinPdelayReqInterval = DEFAULT_PDELAYREQ_INTERVAL;
ptpClock->versionNumber = VERSION_PTP;
/*
* Initialize random number generator using same method as ptpv1:
* seed is now initialized from the last bytes of our mac addres (collected in net.c:findIface())
*/
srand((ptpClock->port_uuid_field[PTP_UUID_LENGTH - 1] << 8) + ptpClock->port_uuid_field[PTP_UUID_LENGTH - 2]);
/*Init other stuff*/
ptpClock->number_foreign_records = 0;
ptpClock->max_foreign_records = rtOpts->max_foreign_records;
}
/* Init ptpClock with run time values (initialization constants are in constants.h)*/
void initData(RunTimeOpts *rtOpts, PtpClock *ptpClock)
{
int i,j;
j=0;
DBG("initData\n");
/* Default data set */
ptpClock->twoStepFlag = TWO_STEP_FLAG;
/*
* init clockIdentity with MAC address and 0xFF and 0xFE. see
* spec 7.5.2.2.2
*/
for (i=0;i<CLOCK_IDENTITY_LENGTH;i++)
{
if (i==3) ptpClock->clockIdentity[i]=0xFF;
else if (i==4) ptpClock->clockIdentity[i]=0xFE;
else
{
ptpClock->clockIdentity[i]=ptpClock->netPath.interfaceID[j];
j++;
}
}
if(rtOpts->pidAsClockId) {
uint16_t pid = htons(getpid());
memcpy(ptpClock->clockIdentity + 3, &pid, 2);
}
ptpClock->bestMaster = NULL;
ptpClock->numberPorts = NUMBER_PORTS;
ptpClock->disabled = rtOpts->portDisabled;
memset(ptpClock->userDescription, 0, sizeof(ptpClock->userDescription));
memcpy(ptpClock->userDescription, rtOpts->portDescription, strlen(rtOpts->portDescription));
memset(&ptpClock->profileIdentity,0,6);
if(rtOpts->ipMode == IPMODE_UNICAST && rtOpts->unicastNegotiation) {
memcpy(&ptpClock->profileIdentity, &PROFILE_ID_TELECOM,6);
}
if(rtOpts->ipMode == IPMODE_MULTICAST &&rtOpts->delayMechanism == E2E) {
memcpy(&ptpClock->profileIdentity, &PROFILE_ID_DEFAULT_E2E,6);
}
if(rtOpts->ipMode == IPMODE_MULTICAST &&rtOpts->delayMechanism == P2P) {
memcpy(&ptpClock->profileIdentity, &PROFILE_ID_DEFAULT_P2P,6);
}
if(rtOpts->dot1AS) {
memcpy(&ptpClock->profileIdentity, &PROFILE_ID_802_1AS,6);
}
ptpClock->clockQuality.clockAccuracy =
rtOpts->clockQuality.clockAccuracy;
ptpClock->clockQuality.clockClass = rtOpts->clockQuality.clockClass;
ptpClock->clockQuality.offsetScaledLogVariance =
rtOpts->clockQuality.offsetScaledLogVariance;
ptpClock->priority1 = rtOpts->priority1;
ptpClock->priority2 = rtOpts->priority2;
ptpClock->domainNumber = rtOpts->domainNumber;
if(rtOpts->slaveOnly) {
ptpClock->slaveOnly = TRUE;
rtOpts->clockQuality.clockClass = SLAVE_ONLY_CLOCK_CLASS;
ptpClock->clockQuality.clockClass = SLAVE_ONLY_CLOCK_CLASS;
}
/* Port configuration data set */
/*
* PortIdentity Init (portNumber = 1 for an ardinary clock spec
* 7.5.2.3)
*/
copyClockIdentity(ptpClock->portIdentity.clockIdentity,
ptpClock->clockIdentity);
ptpClock->portIdentity.portNumber = rtOpts->portNumber;
/* select the initial rate of delayreqs until we receive the first announce message */
ptpClock->logMinDelayReqInterval = rtOpts->initial_delayreq;
clearTime(&ptpClock->peerMeanPathDelay);
ptpClock->logAnnounceInterval = rtOpts->logAnnounceInterval;
ptpClock->announceReceiptTimeout = rtOpts->announceReceiptTimeout;
ptpClock->logSyncInterval = rtOpts->logSyncInterval;
ptpClock->delayMechanism = rtOpts->delayMechanism;
ptpClock->logMinPdelayReqInterval = rtOpts->logMinPdelayReqInterval;
ptpClock->versionNumber = VERSION_PTP;
if(rtOpts->dot1AS) {
ptpClock->transportSpecific = TSP_ETHERNET_AVB;
} else {
ptpClock->transportSpecific = TSP_DEFAULT;
}
/*
* Initialize random number generator using same method as ptpv1:
* seed is now initialized from the last bytes of our mac addres (collected in net.c:findIface())
*/
srand((ptpClock->netPath.interfaceID[PTP_UUID_LENGTH - 1] << 8) +
ptpClock->netPath.interfaceID[PTP_UUID_LENGTH - 2]);
/*Init other stuff*/
ptpClock->number_foreign_records = 0;
ptpClock->max_foreign_records = rtOpts->max_foreign_records;
}
void updatePathDelay(one_way_delay_filter *owd_filt, // one way delay filter
RunTimeOpts *rtOpts, // run time options
PtpClock *ptpClock // PTP main data structure
)
{
Integer16 s;
TimeInternal remote_time;
DBGV("updatePathDelay:\n");
DBGV(" t1 PDelay Req Tx time %10.10ds.%9.9dns\n",
ptpClock->t1_pdelay_req_tx_time.seconds,
ptpClock->t1_pdelay_req_tx_time.nanoseconds
);
DBGV(" t2 PDelay Req Rx time %10.10ds.%9.9dns\n",
ptpClock->t2_pdelay_req_rx_time.seconds,
ptpClock->t2_pdelay_req_rx_time.nanoseconds
);
DBGV(" t3 PDelay Resp Tx time %10.10ds.%9.9dns\n",
ptpClock->t3_pdelay_resp_tx_time.seconds,
ptpClock->t3_pdelay_resp_tx_time.nanoseconds
);
DBGV(" t4 PDelay Resp Rx time %10.10ds.%9.9dns\n",
ptpClock->t4_pdelay_resp_rx_time.seconds,
ptpClock->t4_pdelay_resp_rx_time.nanoseconds
);
DBGV(" PDelay Resp correction %10.10ds.%9.9dns\n",
ptpClock->pdelay_resp_correction.seconds,
ptpClock->pdelay_resp_correction.nanoseconds
);
DBGV(" PDelay Resp follow up %10.10ds.%9.9dns\n",
ptpClock->pdelay_followup_correction.seconds,
ptpClock->pdelay_followup_correction.nanoseconds
);
/* calc 'slave_to_master_delay' */
subTime(&ptpClock->one_way_delay, // Result
&ptpClock->t4_pdelay_resp_rx_time, // PDelay Response Receive time
&ptpClock->t1_pdelay_req_tx_time // minus PDelay Request Transmit time
);
DBGV(" (t4-t1) %10.10ds.%9.9dns\n",
ptpClock->one_way_delay.seconds,
ptpClock->one_way_delay.nanoseconds
);
subTime(&remote_time, // Result
&ptpClock->t3_pdelay_resp_tx_time, // PDelay Resp Transmit time (from responder)
&ptpClock->t2_pdelay_req_rx_time // minus PDelay Request Receive time (from responder)
);
DBGV(" (t3-t2) %10.10ds.%9.9dns\n",
remote_time.seconds,
remote_time.nanoseconds
);
subTime(&ptpClock->one_way_delay, // Result
&ptpClock->one_way_delay, // (T4-T1)
&remote_time // minus (T3-T2)
);
DBGV(" (t4-t1)-(t3-t2) %10.10ds.%9.9dns\n",
ptpClock->one_way_delay.seconds,
ptpClock->one_way_delay.nanoseconds
);
subTime(&ptpClock->one_way_delay, // Result
&ptpClock->one_way_delay, // Current Calculation
&ptpClock->pdelay_resp_correction // minus PDelay Resp Correction
);
DBGV(" minus 1st correction %10.10ds.%9.9dns\n",
ptpClock->one_way_delay.seconds,
ptpClock->one_way_delay.nanoseconds
);
subTime(&ptpClock->one_way_delay, // Result
&ptpClock->one_way_delay, // Current Calculation
&ptpClock->pdelay_followup_correction // minus PDelay Resp Correction
);
DBGV(" minus 2nd correction %10.10ds.%9.9dns\n",
ptpClock->one_way_delay.seconds,
ptpClock->one_way_delay.nanoseconds
);
halveTime(&ptpClock->one_way_delay);
DBGV(" divided by 2 %10.10ds.%9.9dns\n",
ptpClock->one_way_delay.seconds,
ptpClock->one_way_delay.nanoseconds
);
copyTime( &ptpClock->slave_to_master_delay, // Destination
&ptpClock->one_way_delay // Source
);
clearTime(&ptpClock->t1_pdelay_req_tx_time);
clearTime(&ptpClock->t2_pdelay_req_rx_time);
clearTime(&ptpClock->t3_pdelay_resp_tx_time);
clearTime(&ptpClock->t4_pdelay_resp_rx_time);
clearTime(&ptpClock->pdelay_resp_correction);
clearTime(&ptpClock->pdelay_followup_correction);
clearTime(&ptpClock->t1_sync_delta_time);
clearTime(&ptpClock->t2_sync_delta_time);
if(ptpClock->one_way_delay.seconds) // Check if delay is larger than one second
{
/* Delay is larger than one second, clear s_exp and timestamp
* of previously received sent time of Sync message (usually from
* preciseOriginTimestamp of follow up message) and return
*/
DBG("updatePathDelay: One way delay seconds != 0\n");
DBG("updatePathDelay: Clearing one way delay filter s_exp, nsec_prev\n");
owd_filt->s_exp = 0;
owd_filt->nsec_prev = 0;
return;
}
/* avoid overflowing filter */
s = rtOpts->s;
while(abs(owd_filt->y)>>(31-s))
--s;
DBGV("updatePathDelay: rtOpts->s: %d, s:%d\n",
rtOpts->s,
s
);
DBGV("updatePathDelay: current owd_filt->y: %d, s_exp: %d\n",
owd_filt->y,
owd_filt->s_exp
);
/* crank down filter cutoff by increasing 's_exp' */
if(owd_filt->s_exp < 1)
owd_filt->s_exp = 1;
else if(owd_filt->s_exp < 1<<s)
++owd_filt->s_exp;
else if(owd_filt->s_exp > 1<<s)
owd_filt->s_exp = 1<<s;
/* filter 'one_way_delay' */
owd_filt->y = (owd_filt->s_exp-1)
*owd_filt->y/owd_filt->s_exp
+ (ptpClock->one_way_delay.nanoseconds/2
+ owd_filt->nsec_prev/2
)
/owd_filt->s_exp;
/* Record previous one way delay nanosecond value
* and update it with value calculated above
*/
owd_filt->nsec_prev = ptpClock->one_way_delay.nanoseconds;
ptpClock->one_way_delay.nanoseconds = owd_filt->y;
DBGV("updatePathDelay: delay filter y:%d, s_exp:%d\n",
owd_filt->y,
owd_filt->s_exp
);
}
ssize_t
netSendPeerEvent(Octet * buf, UInteger16 length, NetPath * netPath, RunTimeOpts *rtOpts, TimeInternal * tim)
{
ssize_t ret;
struct sockaddr_in addr;
addr.sin_family = AF_INET;
addr.sin_port = htons(PTP_EVENT_PORT);
#ifdef PTPD_PCAP
if ((netPath->pcapGeneral != NULL) && (rtOpts->transport == IEEE_802_3)) {
ret = netSendPcapEther(buf, length,
&netPath->peerEtherDest,
(struct ether_addr *)netPath->interfaceID,
netPath->pcapGeneral);
if (ret <= 0)
DBG("error sending ether multi-cast general message\n");
} else if (netPath->unicastAddr)
#else
if (netPath->unicastAddr)
#endif
{
addr.sin_addr.s_addr = netPath->unicastAddr;
ret = sendto(netPath->eventSock, buf, length, 0,
(struct sockaddr *)&addr,
sizeof(struct sockaddr_in));
if (ret <= 0)
DBG("Error sending unicast peer event message\n");
else
netPath->sentPackets++;
#ifndef SO_TIMESTAMPING
/*
* Need to forcibly loop back the packet since
* we are not using multicast.
*/
addr.sin_addr.s_addr = netPath->interfaceAddr.s_addr;
ret = sendto(netPath->eventSock, buf, length, 0,
(struct sockaddr *)&addr,
sizeof(struct sockaddr_in));
if (ret <= 0)
DBG("Error looping back unicast peer event message\n");
#else
if(!netPath->txTimestampFailure) {
if(!getTxTimestamp(netPath, tim)) {
netPath->txTimestampFailure = TRUE;
if (tim) {
clearTime(tim);
}
}
}
if(netPath->txTimestampFailure) {
/* We've had a TX timestamp receipt timeout - falling back to packet looping */
addr.sin_addr.s_addr = netPath->interfaceAddr.s_addr;
ret = sendto(netPath->eventSock, buf, length, 0,
(struct sockaddr *)&addr,
sizeof(struct sockaddr_in));
if (ret <= 0)
DBG("Error looping back unicast event message\n");
}
#endif /* SO_TIMESTAMPING */
} else {
addr.sin_addr.s_addr = netPath->peerMulticastAddr;
/* is TTL already 1 ? */
if(netPath->ttlEvent != 1) {
/* Try setting TTL to 1 */
if (netSetMulticastTTL(netPath->eventSock,1)) {
netPath->ttlEvent = 1;
}
}
ret = sendto(netPath->eventSock, buf, length, 0,
(struct sockaddr *)&addr,
sizeof(struct sockaddr_in));
if (ret <= 0)
DBG("Error sending multicast peer event message\n");
else
netPath->sentPackets++;
#ifdef SO_TIMESTAMPING
if(!netPath->txTimestampFailure) {
if(!getTxTimestamp(netPath, tim)) {
if (tim) {
clearTime(tim);
}
netPath->txTimestampFailure = TRUE;
/* Try re-enabling MULTICAST_LOOP */
netSetMulticastLoopback(netPath, TRUE);
}
}
#endif /* SO_TIMESTAMPING */
}
if (ret > 0)
netPath->sentPackets++;
return ret;
}
//
// alt_dst: alternative destination.
// if filled, send to this unicast dest;
// if zero, do the normal operation (send to unicast with -u, or send to the multcast group)
//
///
/// TODO: merge these 2 functions into one
///
ssize_t
netSendEvent(Octet * buf, UInteger16 length, NetPath * netPath,
RunTimeOpts *rtOpts, Integer32 alt_dst, TimeInternal * tim)
{
ssize_t ret;
struct sockaddr_in addr;
addr.sin_family = AF_INET;
addr.sin_port = htons(PTP_EVENT_PORT);
#ifdef PTPD_PCAP
/* In PCAP Ethernet mode, we use pcapEvent for receiving all messages
* and pcapGeneral for sending all messages
*/
if ((netPath->pcapGeneral != NULL) && (rtOpts->transport == IEEE_802_3 )) {
ret = netSendPcapEther(buf, length,
&netPath->etherDest,
(struct ether_addr *)netPath->interfaceID,
netPath->pcapGeneral);
if (ret <= 0)
DBG("Error sending ether multicast event message\n");
else
netPath->sentPackets++;
} else {
#endif
if (netPath->unicastAddr || alt_dst ) {
if (netPath->unicastAddr) {
addr.sin_addr.s_addr = netPath->unicastAddr;
} else {
addr.sin_addr.s_addr = alt_dst;
}
/*
* This function is used for PTP only anyway...
* If we're sending to a unicast address, set the UNICAST flag.
*/
*(char *)(buf + 6) |= PTP_UNICAST;
ret = sendto(netPath->eventSock, buf, length, 0,
(struct sockaddr *)&addr,
sizeof(struct sockaddr_in));
if (ret <= 0)
DBG("Error sending unicast event message\n");
else
netPath->sentPackets++;
#ifndef SO_TIMESTAMPING
/*
* Need to forcibly loop back the packet since
* we are not using multicast.
*/
addr.sin_addr.s_addr = netPath->interfaceAddr.s_addr;
ret = sendto(netPath->eventSock, buf, length, 0,
(struct sockaddr *)&addr,
sizeof(struct sockaddr_in));
if (ret <= 0)
DBG("Error looping back unicast event message\n");
#else
if(!netPath->txTimestampFailure) {
if(!getTxTimestamp(netPath, tim)) {
netPath->txTimestampFailure = TRUE;
if (tim) {
clearTime(tim);
}
}
}
if(netPath->txTimestampFailure)
{
/* We've had a TX timestamp receipt timeout - falling back to packet looping */
addr.sin_addr.s_addr = netPath->interfaceAddr.s_addr;
ret = sendto(netPath->eventSock, buf, length, 0,
(struct sockaddr *)&addr,
sizeof(struct sockaddr_in));
if (ret <= 0)
DBG("Error looping back unicast event message\n");
}
#endif /* SO_TIMESTAMPING */
} else {
addr.sin_addr.s_addr = netPath->multicastAddr;
/* Is TTL OK? */
if(netPath->ttlEvent != rtOpts->ttl) {
/* Try restoring TTL */
/* set socket time-to-live */
if (netSetMulticastTTL(netPath->eventSock,rtOpts->ttl)) {
netPath->ttlEvent = rtOpts->ttl;
}
}
ret = sendto(netPath->eventSock, buf, length, 0,
(struct sockaddr *)&addr,
sizeof(struct sockaddr_in));
if (ret <= 0)
DBG("Error sending multicast event message\n");
else
netPath->sentPackets++;
#ifdef SO_TIMESTAMPING
if(!netPath->txTimestampFailure) {
if(!getTxTimestamp(netPath, tim)) {
if (tim) {
clearTime(tim);
}
netPath->txTimestampFailure = TRUE;
/* Try re-enabling MULTICAST_LOOP */
netSetMulticastLoopback(netPath, TRUE);
}
}
#endif /* SO_TIMESTAMPING */
}
#ifdef PTPD_PCAP
}
#endif
return ret;
}
/* perform actions required when leaving 'port_state' and entering 'state' */
void
toState(UInteger8 state, RunTimeOpts *rtOpts, PtpClock *ptpClock)
{
ptpClock->message_activity = TRUE;
/* leaving state tasks */
switch (ptpClock->portState)
{
case PTP_MASTER:
timerStop(SYNC_INTERVAL_TIMER, ptpClock->itimer);
timerStop(ANNOUNCE_INTERVAL_TIMER, ptpClock->itimer);
timerStop(PDELAYREQ_INTERVAL_TIMER, ptpClock->itimer);
break;
case PTP_SLAVE:
timerStop(ANNOUNCE_RECEIPT_TIMER, ptpClock->itimer);
if (ptpClock->delayMechanism == E2E)
timerStop(DELAYREQ_INTERVAL_TIMER, ptpClock->itimer);
else if (ptpClock->delayMechanism == P2P)
timerStop(PDELAYREQ_INTERVAL_TIMER, ptpClock->itimer);
initClock(rtOpts, ptpClock);
break;
case PTP_PASSIVE:
timerStop(PDELAYREQ_INTERVAL_TIMER, ptpClock->itimer);
timerStop(ANNOUNCE_RECEIPT_TIMER, ptpClock->itimer);
break;
case PTP_LISTENING:
timerStop(ANNOUNCE_RECEIPT_TIMER, ptpClock->itimer);
break;
default:
break;
}
/* entering state tasks */
/*
* No need of PRE_MASTER state because of only ordinary clock
* implementation.
*/
switch (state)
{
case PTP_INITIALIZING:
DBG("state PTP_INITIALIZING\n");
ptpClock->portState = PTP_INITIALIZING;
break;
case PTP_FAULTY:
DBG("state PTP_FAULTY\n");
ptpClock->portState = PTP_FAULTY;
break;
case PTP_DISABLED:
DBG("state PTP_DISABLED\n");
ptpClock->portState = PTP_DISABLED;
break;
case PTP_LISTENING:
/* in Listening mode, make sure we don't send anything. Instead we just expect/wait for announces (started below) */
timerStop(SYNC_INTERVAL_TIMER, ptpClock->itimer);
timerStop(ANNOUNCE_INTERVAL_TIMER, ptpClock->itimer);
timerStop(PDELAYREQ_INTERVAL_TIMER, ptpClock->itimer);
timerStop(DELAYREQ_INTERVAL_TIMER, ptpClock->itimer);
/*
* Count how many _unique_ timeouts happen to us.
* If we were already in Listen mode, then do not count this as a seperate reset, but stil do a new IGMP refresh
*/
if (ptpClock->portState != PTP_LISTENING) {
ptpClock->reset_count++;
}
/* Revert to the original DelayReq interval, and ignore the one for the last master */
ptpClock->logMinDelayReqInterval = rtOpts->initial_delayreq;
/* force a IGMP refresh per reset */
if (rtOpts->do_IGMP_refresh) {
netRefreshIGMP(&ptpClock->netPath, rtOpts, ptpClock);
}
DBG("state PTP_LISTENING\n");
INFO(" now in state PTP_LISTENING\n");
timerStart(ANNOUNCE_RECEIPT_TIMER,
(ptpClock->announceReceiptTimeout) *
(pow(2,ptpClock->logAnnounceInterval)),
ptpClock->itimer);
ptpClock->portState = PTP_LISTENING;
break;
case PTP_MASTER:
DBG("state PTP_MASTER\n");
INFO(" now in state PTP_MASTER\n");
timerStart(SYNC_INTERVAL_TIMER,
pow(2,ptpClock->logSyncInterval), ptpClock->itimer);
DBG("SYNC INTERVAL TIMER : %f \n",
pow(2,ptpClock->logSyncInterval));
timerStart(ANNOUNCE_INTERVAL_TIMER,
pow(2,ptpClock->logAnnounceInterval),
ptpClock->itimer);
timerStart(PDELAYREQ_INTERVAL_TIMER,
pow(2,ptpClock->logMinPdelayReqInterval),
ptpClock->itimer);
ptpClock->portState = PTP_MASTER;
break;
case PTP_PASSIVE:
DBG("state PTP_PASSIVE\n");
INFO(" now in state PTP_PASSIVE\n");
timerStart(PDELAYREQ_INTERVAL_TIMER,
pow(2,ptpClock->logMinPdelayReqInterval),
ptpClock->itimer);
timerStart(ANNOUNCE_RECEIPT_TIMER,
(ptpClock->announceReceiptTimeout) *
(pow(2,ptpClock->logAnnounceInterval)),
ptpClock->itimer);
ptpClock->portState = PTP_PASSIVE;
p1(ptpClock, rtOpts);
break;
case PTP_UNCALIBRATED:
DBG("state PTP_UNCALIBRATED\n");
ptpClock->portState = PTP_UNCALIBRATED;
break;
case PTP_SLAVE:
DBG("state PTP_SLAVE\n");
INFO(" now in state PTP_SLAVE\n");
initClock(rtOpts, ptpClock);
ptpClock->waitingForFollow = FALSE;
ptpClock->waitingForDelayResp = FALSE;
// FIXME: clear these vars inside initclock
clearTime(&ptpClock->pdelay_req_send_time);
clearTime(&ptpClock->pdelay_req_receive_time);
clearTime(&ptpClock->pdelay_resp_send_time);
clearTime(&ptpClock->pdelay_resp_receive_time);
timerStart(OPERATOR_MESSAGES_TIMER,
OPERATOR_MESSAGES_INTERVAL,
ptpClock->itimer);
timerStart(ANNOUNCE_RECEIPT_TIMER,
(ptpClock->announceReceiptTimeout) *
(pow(2,ptpClock->logAnnounceInterval)),
ptpClock->itimer);
/*
* Previously, this state transition would start the delayreq timer immediately.
* However, if this was faster than the first received sync, then the servo would drop the delayResp
* Now, we only start the timer after we receive the first sync (in handle_sync())
*/
ptpClock->waiting_for_first_sync = TRUE;
ptpClock->waiting_for_first_delayresp = TRUE;
ptpClock->portState = PTP_SLAVE;
break;
default:
DBG("to unrecognized state\n");
break;
}
if (rtOpts->displayStats)
displayStats(rtOpts, ptpClock);
}
