BOOL attempt_netbios_session_request(struct cli_state *cli, const char *srchost, const char *desthost,
struct in_addr *pdest_ip)
{
struct nmb_name calling, called;
make_nmb_name(&calling, srchost, 0x0);
/*
* If the called name is an IP address
* then use *SMBSERVER immediately.
*/
if(is_ipaddress(desthost))
make_nmb_name(&called, "*SMBSERVER", 0x20);
else
make_nmb_name(&called, desthost, 0x20);
if (!cli_session_request(cli, &calling, &called)) {
struct nmb_name smbservername;
make_nmb_name(&smbservername , "*SMBSERVER", 0x20);
/*
* If the name wasn't *SMBSERVER then
* try with *SMBSERVER if the first name fails.
*/
if (nmb_name_equal(&called, &smbservername)) {
/*
* The name used was *SMBSERVER, don't bother with another name.
*/
DEBUG(0,("attempt_netbios_session_request: %s rejected the session for name *SMBSERVER with error %s.\n",
desthost, cli_errstr(cli) ));
return False;
}
/*
* We need to close the connection here but can't call cli_shutdown as
* will free an allocated cli struct. cli_close_connection was invented
* for this purpose. JRA. Based on work by "Kim R. Pedersen" <*****@*****.**>.
*/
cli_close_connection(cli);
if (!cli_initialise(cli) || !cli_connect(cli, desthost, pdest_ip) ||
!cli_session_request(cli, &calling, &smbservername)) {
DEBUG(0,("attempt_netbios_session_request: %s rejected the session for name *SMBSERVER with error %s\n",
desthost, cli_errstr(cli) ));
return False;
}
}
return True;
}
static int do_message_op(void)
{
struct in_addr ip;
struct nmb_name called, calling;
fstring server_name;
char name_type_hex[10];
make_nmb_name(&calling, global_myname(), 0x0);
make_nmb_name(&called , desthost, name_type);
fstrcpy(server_name, desthost);
snprintf(name_type_hex, sizeof(name_type_hex), "#%X", name_type);
fstrcat(server_name, name_type_hex);
zero_ip(&ip);
if (!(cli=cli_initialise(NULL)) || (cli_set_port(cli, port) != port) ||
!cli_connect(cli, server_name, &ip)) {
d_printf("Connection to %s failed\n", desthost);
return 1;
}
if (!cli_session_request(cli, &calling, &called)) {
d_printf("session request failed\n");
cli_shutdown(cli);
return 1;
}
send_message();
cli_shutdown(cli);
return 0;
}
static struct cli_state *do_connect( const char *server, const char *share,
BOOL show_sessetup )
{
struct cli_state *c = NULL;
struct nmb_name called, calling;
const char *server_n;
struct in_addr ip;
pstring servicename;
char *sharename;
fstring newserver, newshare;
NTSTATUS status;
/* make a copy so we don't modify the global string 'service' */
pstrcpy(servicename, share);
sharename = servicename;
if (*sharename == '\\') {
server = sharename+2;
sharename = strchr_m(server,'\\');
if (!sharename) return NULL;
*sharename = 0;
sharename++;
}
server_n = server;
zero_ip(&ip);
make_nmb_name(&calling, global_myname(), 0x0);
make_nmb_name(&called , server, name_type);
again:
zero_ip(&ip);
if (have_ip)
ip = dest_ip;
/* have to open a new connection */
if (!(c=cli_initialise()) || (cli_set_port(c, port) != port)) {
d_printf("Connection to %s failed\n", server_n);
return NULL;
}
status = cli_connect(c, server_n, &ip);
if (!NT_STATUS_IS_OK(status)) {
d_printf("Connection to %s failed (Error %s)\n", server_n, nt_errstr(status));
return NULL;
}
c->protocol = max_protocol;
c->use_kerberos = use_kerberos;
cli_setup_signing_state(c, signing_state);
if (!cli_session_request(c, &calling, &called, NULL)) {
char *p;
d_printf("session request to %s failed (%s)\n",
called.name, cli_errstr(c));
cli_shutdown(c);
c = NULL;
if ((p=strchr_m(called.name, '.'))) {
*p = 0;
goto again;
}
if (strcmp(called.name, "*SMBSERVER")) {
make_nmb_name(&called , "*SMBSERVER", 0x20);
goto again;
}
return NULL;
}
DEBUG(4,(" session request ok\n"));
if (!cli_negprot(c)) {
d_printf("protocol negotiation failed\n");
cli_shutdown(c);
return NULL;
}
if (!got_pass) {
char *pass = getpass("Password: "******"", "", 0, "", 0,
lp_workgroup()))) {
d_printf("session setup failed: %s\n", cli_errstr(c));
if (NT_STATUS_V(cli_nt_error(c)) ==
NT_STATUS_V(NT_STATUS_MORE_PROCESSING_REQUIRED))
d_printf("did you forget to run kinit?\n");
cli_shutdown(c);
return NULL;
}
d_printf("Anonymous login successful\n");
}
if ( show_sessetup ) {
if (*c->server_domain) {
DEBUG(0,("Domain=[%s] OS=[%s] Server=[%s]\n",
c->server_domain,c->server_os,c->server_type));
} else if (*c->server_os || *c->server_type){
DEBUG(0,("OS=[%s] Server=[%s]\n",
c->server_os,c->server_type));
}
}
DEBUG(4,(" session setup ok\n"));
/* here's the fun part....to support 'msdfs proxy' shares
(on Samba or windows) we have to issues a TRANS_GET_DFS_REFERRAL
here before trying to connect to the original share.
check_dfs_proxy() will fail if it is a normal share. */
if ( (c->capabilities & CAP_DFS) && cli_check_msdfs_proxy( c, sharename, newserver, newshare ) ) {
cli_shutdown(c);
return do_connect( newserver, newshare, False );
}
/* must be a normal share */
if (!cli_send_tconX(c, sharename, "?????", password, strlen(password)+1)) {
d_printf("tree connect failed: %s\n", cli_errstr(c));
cli_shutdown(c);
return NULL;
}
DEBUG(4,(" tconx ok\n"));
return c;
}
static void sync_child(char *name, int nm_type,
char *workgroup,
struct in_addr ip, bool local, bool servers,
char *fname)
{
fstring unix_workgroup;
struct cli_state *cli;
uint32 local_type = local ? SV_TYPE_LOCAL_LIST_ONLY : 0;
struct nmb_name called, calling;
struct sockaddr_storage ss;
NTSTATUS status;
/* W2K DMB's return empty browse lists on port 445. Use 139.
* Patch from Andy Levine [email protected].
*/
cli = cli_initialise();
if (!cli) {
return;
}
cli_set_port(cli, 139);
in_addr_to_sockaddr_storage(&ss, ip);
status = cli_connect(cli, name, &ss);
if (!NT_STATUS_IS_OK(status)) {
cli_shutdown(cli);
return;
}
make_nmb_name(&calling, get_local_machine_name(), 0x0);
make_nmb_name(&called , name, nm_type);
if (!cli_session_request(cli, &calling, &called)) {
cli_shutdown(cli);
return;
}
status = cli_negprot(cli);
if (!NT_STATUS_IS_OK(status)) {
cli_shutdown(cli);
return;
}
if (!NT_STATUS_IS_OK(cli_session_setup(cli, "", "", 1, "", 0,
workgroup))) {
cli_shutdown(cli);
return;
}
if (!NT_STATUS_IS_OK(cli_tcon_andx(cli, "IPC$", "IPC", "", 1))) {
cli_shutdown(cli);
return;
}
/* All the cli_XX functions take UNIX character set. */
fstrcpy(unix_workgroup, cli->server_domain ? cli->server_domain : workgroup);
/* Fetch a workgroup list. */
cli_NetServerEnum(cli, unix_workgroup,
local_type|SV_TYPE_DOMAIN_ENUM,
callback, NULL);
/* Now fetch a server list. */
if (servers) {
fstrcpy(unix_workgroup, workgroup);
cli_NetServerEnum(cli, unix_workgroup,
local?SV_TYPE_LOCAL_LIST_ONLY:SV_TYPE_ALL,
callback, NULL);
}
cli_shutdown(cli);
}
static SMBCSRV *
SMBC_server_internal(TALLOC_CTX *ctx,
SMBCCTX *context,
bool connect_if_not_found,
const char *server,
const char *share,
char **pp_workgroup,
char **pp_username,
char **pp_password,
bool *in_cache)
{
SMBCSRV *srv=NULL;
char *workgroup = NULL;
struct cli_state *c;
struct nmb_name called, calling;
const char *server_n = server;
struct sockaddr_storage ss;
int tried_reverse = 0;
int port_try_first;
int port_try_next;
int is_ipc = (share != NULL && strcmp(share, "IPC$") == 0);
uint32 fs_attrs = 0;
const char *username_used;
NTSTATUS status;
char *newserver, *newshare;
zero_sockaddr(&ss);
ZERO_STRUCT(c);
*in_cache = false;
if (server[0] == 0) {
errno = EPERM;
return NULL;
}
/* Look for a cached connection */
srv = SMBC_find_server(ctx, context, server, share,
pp_workgroup, pp_username, pp_password);
/*
* If we found a connection and we're only allowed one share per
* server...
*/
if (srv &&
*share != '\0' &&
smbc_getOptionOneSharePerServer(context)) {
/*
* ... then if there's no current connection to the share,
* connect to it. SMBC_find_server(), or rather the function
* pointed to by context->get_cached_srv_fn which
* was called by SMBC_find_server(), will have issued a tree
* disconnect if the requested share is not the same as the
* one that was already connected.
*/
/*
* Use srv->cli->desthost and srv->cli->share instead of
* server and share below to connect to the actual share,
* i.e., a normal share or a referred share from
* 'msdfs proxy' share.
*/
if (srv->cli->cnum == (uint16) -1) {
/* Ensure we have accurate auth info */
SMBC_call_auth_fn(ctx, context,
srv->cli->desthost,
srv->cli->share,
pp_workgroup,
pp_username,
pp_password);
if (!*pp_workgroup || !*pp_username || !*pp_password) {
errno = ENOMEM;
cli_shutdown(srv->cli);
srv->cli = NULL;
smbc_getFunctionRemoveCachedServer(context)(context,
srv);
return NULL;
}
/*
* We don't need to renegotiate encryption
* here as the encryption context is not per
* tid.
*/
status = cli_tcon_andx(srv->cli, srv->cli->share, "?????",
*pp_password,
strlen(*pp_password)+1);
if (!NT_STATUS_IS_OK(status)) {
errno = map_errno_from_nt_status(status);
cli_shutdown(srv->cli);
srv->cli = NULL;
smbc_getFunctionRemoveCachedServer(context)(context,
srv);
srv = NULL;
}
/* Determine if this share supports case sensitivity */
if (is_ipc) {
DEBUG(4,
("IPC$ so ignore case sensitivity\n"));
} else if (!cli_get_fs_attr_info(c, &fs_attrs)) {
DEBUG(4, ("Could not retrieve "
"case sensitivity flag: %s.\n",
cli_errstr(c)));
/*
* We can't determine the case sensitivity of
* the share. We have no choice but to use the
* user-specified case sensitivity setting.
*/
if (smbc_getOptionCaseSensitive(context)) {
cli_set_case_sensitive(c, True);
} else {
cli_set_case_sensitive(c, False);
}
} else {
DEBUG(4,
("Case sensitive: %s\n",
(fs_attrs & FILE_CASE_SENSITIVE_SEARCH
? "True"
: "False")));
cli_set_case_sensitive(
c,
(fs_attrs & FILE_CASE_SENSITIVE_SEARCH
? True
: False));
}
/*
* Regenerate the dev value since it's based on both
* server and share
*/
if (srv) {
srv->dev = (dev_t)(str_checksum(srv->cli->desthost) ^
str_checksum(srv->cli->share));
}
}
}
/* If we have a connection... */
if (srv) {
/* ... then we're done here. Give 'em what they came for. */
*in_cache = true;
goto done;
}
/* If we're not asked to connect when a connection doesn't exist... */
if (! connect_if_not_found) {
/* ... then we're done here. */
return NULL;
}
if (!*pp_workgroup || !*pp_username || !*pp_password) {
errno = ENOMEM;
return NULL;
}
make_nmb_name(&calling, smbc_getNetbiosName(context), 0x0);
make_nmb_name(&called , server, 0x20);
DEBUG(4,("SMBC_server: server_n=[%s] server=[%s]\n", server_n, server));
DEBUG(4,(" -> server_n=[%s] server=[%s]\n", server_n, server));
again:
zero_sockaddr(&ss);
/* have to open a new connection */
if ((c = cli_initialise()) == NULL) {
errno = ENOMEM;
return NULL;
}
if (smbc_getOptionUseKerberos(context)) {
c->use_kerberos = True;
}
if (smbc_getOptionFallbackAfterKerberos(context)) {
c->fallback_after_kerberos = True;
}
if (smbc_getOptionUseCCache(context)) {
c->use_ccache = True;
}
c->timeout = smbc_getTimeout(context);
/*
* Force use of port 139 for first try if share is $IPC, empty, or
* null, so browse lists can work
*/
if (share == NULL || *share == '\0' || is_ipc) {
port_try_first = 139;
port_try_next = 445;
} else {
port_try_first = 445;
port_try_next = 139;
}
c->port = port_try_first;
status = cli_connect(c, server_n, &ss);
if (!NT_STATUS_IS_OK(status)) {
/* First connection attempt failed. Try alternate port. */
c->port = port_try_next;
status = cli_connect(c, server_n, &ss);
if (!NT_STATUS_IS_OK(status)) {
cli_shutdown(c);
errno = ETIMEDOUT;
return NULL;
}
}
if (!cli_session_request(c, &calling, &called)) {
cli_shutdown(c);
if (strcmp(called.name, "*SMBSERVER")) {
make_nmb_name(&called , "*SMBSERVER", 0x20);
goto again;
} else { /* Try one more time, but ensure we don't loop */
/* Only try this if server is an IP address ... */
if (is_ipaddress(server) && !tried_reverse) {
fstring remote_name;
struct sockaddr_storage rem_ss;
if (!interpret_string_addr(&rem_ss, server,
NI_NUMERICHOST)) {
DEBUG(4, ("Could not convert IP address "
"%s to struct sockaddr_storage\n",
server));
errno = ETIMEDOUT;
return NULL;
}
tried_reverse++; /* Yuck */
if (name_status_find("*", 0, 0,
&rem_ss, remote_name)) {
make_nmb_name(&called,
remote_name,
0x20);
goto again;
}
}
}
errno = ETIMEDOUT;
return NULL;
}
DEBUG(4,(" session request ok\n"));
status = cli_negprot(c);
if (!NT_STATUS_IS_OK(status)) {
cli_shutdown(c);
errno = ETIMEDOUT;
return NULL;
}
username_used = *pp_username;
if (!NT_STATUS_IS_OK(cli_session_setup(c, username_used,
*pp_password,
strlen(*pp_password),
*pp_password,
strlen(*pp_password),
*pp_workgroup))) {
fprintf(stderr, "JerryLin: Libsmb_server.c->SMBC_server_internal: cli_session_setup fail with username=[%s], password=[%s]\n", username_used, *pp_password);
/* Failed. Try an anonymous login, if allowed by flags. */
username_used = "";
if (smbc_getOptionNoAutoAnonymousLogin(context) ||
!NT_STATUS_IS_OK(cli_session_setup(c, username_used,
*pp_password, 1,
*pp_password, 0,
*pp_workgroup))) {
cli_shutdown(c);
errno = EPERM;
return NULL;
}
}
status = cli_init_creds(c, username_used,
*pp_workgroup, *pp_password);
if (!NT_STATUS_IS_OK(status)) {
errno = map_errno_from_nt_status(status);
cli_shutdown(c);
return NULL;
}
DEBUG(4,(" session setup ok\n"));
/* here's the fun part....to support 'msdfs proxy' shares
(on Samba or windows) we have to issues a TRANS_GET_DFS_REFERRAL
here before trying to connect to the original share.
cli_check_msdfs_proxy() will fail if it is a normal share. */
if ((c->capabilities & CAP_DFS) &&
cli_check_msdfs_proxy(ctx, c, share,
&newserver, &newshare,
/* FIXME: cli_check_msdfs_proxy() does
not support smbc_smb_encrypt_level type */
context->internal->smb_encryption_level ?
true : false,
*pp_username,
*pp_password,
*pp_workgroup)) {
cli_shutdown(c);
srv = SMBC_server_internal(ctx, context, connect_if_not_found,
newserver, newshare, pp_workgroup,
pp_username, pp_password, in_cache);
TALLOC_FREE(newserver);
TALLOC_FREE(newshare);
return srv;
}
/* must be a normal share */
status = cli_tcon_andx(c, share, "?????", *pp_password,
strlen(*pp_password)+1);
if (!NT_STATUS_IS_OK(status)) {
errno = map_errno_from_nt_status(status);
fprintf(stderr, "JerryLin: Libsmb_server.c->SMBC_server_internal: cli_tcon_andx return %08X, errno=[%d]\n", NT_STATUS_V(status), errno);
cli_shutdown(c);
return NULL;
}
DEBUG(4,(" tconx ok\n"));
/* Determine if this share supports case sensitivity */
if (is_ipc) {
DEBUG(4, ("IPC$ so ignore case sensitivity\n"));
} else if (!cli_get_fs_attr_info(c, &fs_attrs)) {
DEBUG(4, ("Could not retrieve case sensitivity flag: %s.\n",
cli_errstr(c)));
/*
* We can't determine the case sensitivity of the share. We
* have no choice but to use the user-specified case
* sensitivity setting.
*/
if (smbc_getOptionCaseSensitive(context)) {
cli_set_case_sensitive(c, True);
} else {
cli_set_case_sensitive(c, False);
}
} else {
DEBUG(4, ("Case sensitive: %s\n",
(fs_attrs & FILE_CASE_SENSITIVE_SEARCH
? "True"
: "False")));
cli_set_case_sensitive(c,
(fs_attrs & FILE_CASE_SENSITIVE_SEARCH
? True
: False));
}
if (context->internal->smb_encryption_level) {
/* Attempt UNIX smb encryption. */
if (!NT_STATUS_IS_OK(cli_force_encryption(c,
username_used,
*pp_password,
*pp_workgroup))) {
/*
* context->smb_encryption_level == 1
* means don't fail if encryption can't be negotiated,
* == 2 means fail if encryption can't be negotiated.
*/
DEBUG(4,(" SMB encrypt failed\n"));
if (context->internal->smb_encryption_level == 2) {
cli_shutdown(c);
errno = EPERM;
return NULL;
}
}
DEBUG(4,(" SMB encrypt ok\n"));
}
/*
* Ok, we have got a nice connection
* Let's allocate a server structure.
*/
srv = SMB_MALLOC_P(SMBCSRV);
if (!srv) {
cli_shutdown(c);
errno = ENOMEM;
return NULL;
}
ZERO_STRUCTP(srv);
srv->cli = c;
srv->dev = (dev_t)(str_checksum(server) ^ str_checksum(share));
srv->no_pathinfo = False;
srv->no_pathinfo2 = False;
srv->no_nt_session = False;
done:
if (!pp_workgroup || !*pp_workgroup || !**pp_workgroup) {
workgroup = talloc_strdup(ctx, smbc_getWorkgroup(context));
} else {
workgroup = *pp_workgroup;
}
if(!workgroup) {
return NULL;
}
/* set the credentials to make DFS work */
smbc_set_credentials_with_fallback(context,
workgroup,
*pp_username,
*pp_password);
return srv;
}
int vscan_send_warning_message(const char *filename, const char *virname, const char *ipaddr) {
struct in_addr ip;
struct sockaddr_storage ss;
struct nmb_name called, calling;
pstring myname;
pstring message;
pstring shortfilename;
char* lastslash;
static pstring lastfile;
static pstring lastip;
#if SAMBA_VERSION_MAJOR==3
fstrcpy(remote_machine, get_remote_machine_name());
DEBUG(5, ("remote machine is: %s\n", remote_machine));
#endif
/* Only notify once for a given virus/ip combo - otherwise the
* scanner will go crazy reaccessing the file and sending
* messages once the user hits the "okay" button */
if (strncmp(lastfile,filename,sizeof(pstring)) == 0) {
if (strncmp(lastip,ipaddr,sizeof(pstring)) == 0) {
DEBUG(5,("Both IP and Filename are the same, not notifying\n"));
return 0;
}
}
ZERO_ARRAY(lastfile);
ZERO_ARRAY(lastip);
pstrcpy(lastfile,filename);
pstrcpy(lastip,ipaddr);
ZERO_ARRAY(myname);
pstrcpy(myname,myhostname());
ZERO_ARRAY(username);
/* could make this configurable */
snprintf(username,sizeof(pstring)-1,"%s VIRUS SCANNER",myname);
/* We need to get the real ip structure from the ip string
* is this info already available somewhere else in samba? */
zero_ip_v4(&ip);
if (inet_aton(ipaddr,&ip) == 0) {
DEBUG(5,("Cannot resolve ip address %s\n", ipaddr));
return 1;
}
in_addr_to_sockaddr_storage(&ss, ip);
make_nmb_name(&calling, myname, 0x0);
make_nmb_name(&called , remote_machine, name_type);
if (!(cli=cli_initialise())) {
DEBUG(5,("Connection to %s failed\n", remote_machine));
return 1;
}
cli_set_port(cli, port);
if (!NT_STATUS_IS_OK(cli_connect(cli, remote_machine, &ss))) {
DEBUG(5,("Connection to %s failed\n", remote_machine));
return 1;
}
if (!cli_session_request(cli, &calling, &called)) {
DEBUG(5,("session request failed\n"));
cli_shutdown(cli);
return 1;
}
ZERO_ARRAY(shortfilename);
/* we don't want the entire filename, otherwise the message service may choke
* so we chop off the path up to the very last forward-slash
* assumption: unix-style pathnames in filename (don't know if there's a
* portable file-separator variable... */
lastslash = strrchr(filename,'/');
if (lastslash != NULL && lastslash != filename) {
pstrcpy(shortfilename,lastslash+1);
} else {
pstrcpy(shortfilename,filename);
}
ZERO_ARRAY(message);
/* could make the message configurable and language specific? */
snprintf(message,sizeof(pstring)-1,
"%s IS INFECTED WITH VIRUS %s.\r\n\r\nAccess will be denied.\r\nPlease contact your system administrator",
shortfilename, virname);
/* actually send the message... */
send_message(message);
cli_shutdown(cli);
return 0;
}
/*****************************************************
return a connection to a server (existing or new)
*******************************************************/
struct smbw_server *smbw_server(char *server, char *share)
{
struct smbw_server *srv=NULL;
struct cli_state c;
char *username;
char *password;
char *workgroup;
struct nmb_name called, calling;
char *p, *server_n = server;
fstring group;
pstring ipenv;
struct in_addr ip;
zero_ip(&ip);
ZERO_STRUCT(c);
get_auth_data_fn(server, share, &workgroup, &username, &password);
/* try to use an existing connection */
for (srv=smbw_srvs;srv;srv=srv->next) {
if (strcmp(server,srv->server_name)==0 &&
strcmp(share,srv->share_name)==0 &&
strcmp(workgroup,srv->workgroup)==0 &&
strcmp(username, srv->username) == 0)
return srv;
}
if (server[0] == 0) {
errno = EPERM;
return NULL;
}
make_nmb_name(&calling, global_myname, 0x0);
make_nmb_name(&called , server, 0x20);
DEBUG(4,("server_n=[%s] server=[%s]\n", server_n, server));
if ((p=strchr(server_n,'#')) &&
(strcmp(p+1,"1D")==0 || strcmp(p+1,"01")==0)) {
struct in_addr sip;
pstring s;
fstrcpy(group, server_n);
p = strchr(group,'#');
*p = 0;
/* cache the workgroup master lookup */
slprintf(s,sizeof(s)-1,"MASTER_%s", group);
if (!(server_n = smbw_getshared(s))) {
if (!find_master_ip(group, &sip)) {
errno = ENOENT;
return NULL;
}
fstrcpy(group, inet_ntoa(sip));
server_n = group;
smbw_setshared(s,server_n);
}
}
DEBUG(4,(" -> server_n=[%s] server=[%s]\n", server_n, server));
again:
slprintf(ipenv,sizeof(ipenv)-1,"HOST_%s", server_n);
zero_ip(&ip);
if ((p=smbw_getshared(ipenv))) {
ip = *(interpret_addr2(p));
}
/* have to open a new connection */
if (!cli_initialise(&c) || !cli_connect(&c, server_n, &ip)) {
errno = ENOENT;
return NULL;
}
if (!cli_session_request(&c, &calling, &called)) {
cli_shutdown(&c);
if (strcmp(called.name, "*SMBSERVER")) {
make_nmb_name(&called , "*SMBSERVER", 0x20);
goto again;
}
errno = ENOENT;
return NULL;
}
DEBUG(4,(" session request ok\n"));
if (!cli_negprot(&c)) {
cli_shutdown(&c);
errno = ENOENT;
return NULL;
}
if (!cli_session_setup(&c, username,
password, strlen(password),
password, strlen(password),
workgroup) &&
/* try an anonymous login if it failed */
!cli_session_setup(&c, "", "", 1,"", 0, workgroup)) {
cli_shutdown(&c);
errno = EPERM;
return NULL;
}
DEBUG(4,(" session setup ok\n"));
if (!cli_send_tconX(&c, share, "?????",
password, strlen(password)+1)) {
errno = smbw_errno(&c);
cli_shutdown(&c);
return NULL;
}
smbw_setshared(ipenv,inet_ntoa(ip));
DEBUG(4,(" tconx ok\n"));
srv = (struct smbw_server *)malloc(sizeof(*srv));
if (!srv) {
errno = ENOMEM;
goto failed;
}
ZERO_STRUCTP(srv);
srv->cli = c;
srv->dev = (dev_t)(str_checksum(server) ^ str_checksum(share));
srv->server_name = strdup(server);
if (!srv->server_name) {
errno = ENOMEM;
goto failed;
}
srv->share_name = strdup(share);
if (!srv->share_name) {
errno = ENOMEM;
goto failed;
}
srv->workgroup = strdup(workgroup);
if (!srv->workgroup) {
errno = ENOMEM;
goto failed;
}
srv->username = strdup(username);
if (!srv->username) {
errno = ENOMEM;
goto failed;
}
/* some programs play with file descriptors fairly intimately. We
try to get out of the way by duping to a high fd number */
if (fcntl(SMBW_CLI_FD + srv->cli.fd, F_GETFD) && errno == EBADF) {
if (dup2(srv->cli.fd,SMBW_CLI_FD+srv->cli.fd) ==
srv->cli.fd+SMBW_CLI_FD) {
close(srv->cli.fd);
srv->cli.fd += SMBW_CLI_FD;
}
}
DLIST_ADD(smbw_srvs, srv);
return srv;
failed:
cli_shutdown(&c);
if (!srv) return NULL;
SAFE_FREE(srv->server_name);
SAFE_FREE(srv->share_name);
SAFE_FREE(srv);
return NULL;
}
/****************************************************************************
establishes a connection right up to doing tconX, reading in a password.
****************************************************************************/
BOOL cli_establish_connection(struct cli_state *cli,
char *dest_host, struct in_addr *dest_ip,
struct nmb_name *calling,
struct nmb_name *called, char *service,
char *service_type, BOOL do_shutdown,
BOOL do_tcon)
{
cli->dbg(5,
"cli_establish_connection: %s connecting to %s (%s) - %s [%s]\n",
nmb_namestr(calling), nmb_namestr(called),
inet_ntoa(*dest_ip), cli->user_name, cli->domain);
/* establish connection */
if ((!cli->initialised))
{
return False;
}
if (!cli_connect(cli, dest_host, dest_ip))
{
cli->dbg(1,
"cli_establish_connection: failed to connect to %s (%s)\n",
nmb_namestr(calling), inet_ntoa(*dest_ip));
return False;
}
if (!cli_session_request(cli, calling, called))
{
cli->dbg(1, "failed session request\n");
if (do_shutdown)
cli_shutdown(cli);
return False;
}
if (!cli_negprot(cli))
{
cli->dbg(1, "failed negprot\n");
if (do_shutdown)
cli_shutdown(cli);
return False;
}
if (cli->pwd.cleartext || cli->pwd.null_pwd)
{
fstring passwd;
int pass_len;
if (cli->pwd.null_pwd)
{
/* attempt null session */
passwd[0] = 0;
pass_len = 1;
}
else
{
/* attempt clear-text session */
pwd_get_cleartext(&(cli->pwd), passwd);
pass_len = strlen(passwd);
}
/* attempt clear-text session */
if (!cli_session_setup(cli, cli->user_name,
passwd, pass_len,
NULL, 0, cli->domain))
{
cli->dbg(1, "failed session setup\n");
if (do_shutdown)
{
cli_shutdown(cli);
}
return False;
}
if (do_tcon)
{
if (!cli_send_tconX(cli, service, service_type,
(char *)passwd, strlen(passwd)))
{
cli->dbg(1, "failed tcon_X\n");
if (do_shutdown)
{
cli_shutdown(cli);
}
return False;
}
}
}
else
{
/* attempt encrypted session */
unsigned char nt_sess_pwd[24];
unsigned char lm_sess_pwd[24];
/* creates (storing a copy of) and then obtains a 24 byte password OWF */
pwd_make_lm_nt_owf(&(cli->pwd), cli->cryptkey);
pwd_get_lm_nt_owf(&(cli->pwd), lm_sess_pwd, nt_sess_pwd);
/* attempt encrypted session */
if (!cli_session_setup(cli, cli->user_name,
(char *)lm_sess_pwd,
sizeof(lm_sess_pwd),
(char *)nt_sess_pwd,
sizeof(nt_sess_pwd), cli->domain))
{
cli->dbg(1, "failed session setup\n");
if (do_shutdown)
cli_shutdown(cli);
return False;
}
if (do_tcon)
{
if (!cli_send_tconX(cli, service, service_type,
(char *)nt_sess_pwd,
sizeof(nt_sess_pwd)))
{
cli->dbg(1, "failed tcon_X\n");
if (do_shutdown)
cli_shutdown(cli);
return False;
}
}
}
if (do_shutdown)
cli_shutdown(cli);
return True;
}
NTSTATUS cli_full_connection(struct cli_state **output_cli,
const char *my_name, const char *dest_host,
struct in_addr *dest_ip, int port,
const char *service, const char *service_type,
const char *user, const char *domain,
const char *password, int pass_len)
{
struct ntuser_creds creds;
NTSTATUS nt_status;
struct nmb_name calling;
struct nmb_name called;
struct cli_state *cli;
struct in_addr ip;
if (!output_cli)
DEBUG(0, ("output_cli is NULL!?!"));
*output_cli = NULL;
make_nmb_name(&calling, my_name, 0x0);
make_nmb_name(&called , dest_host, 0x20);
again:
if (!(cli = cli_initialise(NULL)))
return NT_STATUS_NO_MEMORY;
if (cli_set_port(cli, port) != port) {
cli_shutdown(cli);
return NT_STATUS_UNSUCCESSFUL;
}
ip = *dest_ip;
DEBUG(3,("Connecting to host=%s share=%s\n", dest_host, service));
if (!cli_connect(cli, dest_host, &ip)) {
DEBUG(1,("cli_establish_connection: failed to connect to %s (%s)\n",
nmb_namestr(&called), inet_ntoa(*dest_ip)));
cli_shutdown(cli);
return NT_STATUS_UNSUCCESSFUL;
}
if (!cli_session_request(cli, &calling, &called)) {
char *p;
DEBUG(1,("session request to %s failed (%s)\n",
called.name, cli_errstr(cli)));
cli_shutdown(cli);
if ((p=strchr(called.name, '.')) && !is_ipaddress(called.name)) {
*p = 0;
goto again;
}
if (strcmp(called.name, "*SMBSERVER")) {
make_nmb_name(&called , "*SMBSERVER", 0x20);
goto again;
}
return NT_STATUS_UNSUCCESSFUL;
}
if (!cli_negprot(cli)) {
DEBUG(1,("failed negprot\n"));
nt_status = NT_STATUS_UNSUCCESSFUL;
cli_shutdown(cli);
return nt_status;
}
if (!cli_session_setup(cli, user, password, pass_len, password, pass_len,
domain)) {
DEBUG(1,("failed session setup\n"));
nt_status = cli_nt_error(cli);
cli_shutdown(cli);
if (NT_STATUS_IS_OK(nt_status))
nt_status = NT_STATUS_UNSUCCESSFUL;
return nt_status;
}
if (service) {
if (!cli_send_tconX(cli, service, service_type,
password, pass_len)) {
DEBUG(1,("failed tcon_X\n"));
nt_status = cli_nt_error(cli);
cli_shutdown(cli);
if (NT_STATUS_IS_OK(nt_status))
nt_status = NT_STATUS_UNSUCCESSFUL;
return nt_status;
}
}
init_creds(&creds, user, domain, password, pass_len);
cli_init_creds(cli, &creds);
*output_cli = cli;
return NT_STATUS_OK;
}
BOOL cli_session_request(struct cli_state *cli,
struct nmb_name *calling, struct nmb_name *called)
{
char *p;
int len = 4;
extern pstring user_socket_options;
/* 445 doesn't have session request */
if (cli->port == 445) return True;
/* send a session request (RFC 1002) */
memcpy(&(cli->calling), calling, sizeof(*calling));
memcpy(&(cli->called ), called , sizeof(*called ));
/* put in the destination name */
p = cli->outbuf+len;
name_mangle(cli->called .name, p, cli->called .name_type);
len += name_len(p);
/* and my name */
p = cli->outbuf+len;
name_mangle(cli->calling.name, p, cli->calling.name_type);
len += name_len(p);
/* setup the packet length
* Remove four bytes from the length count, since the length
* field in the NBT Session Service header counts the number
* of bytes which follow. The cli_send_smb() function knows
* about this and accounts for those four bytes.
* CRH.
*/
len -= 4;
_smb_setlen(cli->outbuf,len);
SCVAL(cli->outbuf,0,0x81);
#ifdef WITH_SSL
retry:
#endif /* WITH_SSL */
cli_send_smb(cli);
DEBUG(5,("Sent session request\n"));
if (!cli_receive_smb(cli))
return False;
if (CVAL(cli->inbuf,0) == 0x84) {
/* C. Hoch 9/14/95 Start */
/* For information, here is the response structure.
* We do the byte-twiddling to for portability.
struct RetargetResponse{
unsigned char type;
unsigned char flags;
int16 length;
int32 ip_addr;
int16 port;
};
*/
int port = (CVAL(cli->inbuf,8)<<8)+CVAL(cli->inbuf,9);
/* SESSION RETARGET */
putip((char *)&cli->dest_ip,cli->inbuf+4);
cli->fd = open_socket_out(SOCK_STREAM, &cli->dest_ip, port, LONG_CONNECT_TIMEOUT);
if (cli->fd == -1)
return False;
DEBUG(3,("Retargeted\n"));
set_socket_options(cli->fd,user_socket_options);
/* Try again */
{
static int depth;
BOOL ret;
if (depth > 4) {
DEBUG(0,("Retarget recursion - failing\n"));
return False;
}
depth++;
ret = cli_session_request(cli, calling, called);
depth--;
return ret;
}
} /* C. Hoch 9/14/95 End */
#ifdef WITH_SSL
if (CVAL(cli->inbuf,0) == 0x83 && CVAL(cli->inbuf,4) == 0x8e){ /* use ssl */
if (!sslutil_fd_is_ssl(cli->fd)){
if (sslutil_connect(cli->fd) == 0)
goto retry;
}
}
#endif /* WITH_SSL */
if (CVAL(cli->inbuf,0) != 0x82) {
/* This is the wrong place to put the error... JRA. */
cli->rap_error = CVAL(cli->inbuf,4);
return False;
}
return(True);
}
static struct cli_state *do_connect( const char *server, const char *share,
BOOL show_sessetup )
{
struct cli_state *c;
struct nmb_name called, calling;
const char *server_n;
struct in_addr ip;
pstring servicename;
char *sharename;
/* make a copy so we don't modify the global string 'service' */
pstrcpy(servicename, share);
sharename = servicename;
if (*sharename == '\\') {
server = sharename+2;
sharename = strchr_m(server,'\\');
if (!sharename) return NULL;
*sharename = 0;
sharename++;
}
server_n = server;
zero_ip(&ip);
make_nmb_name(&calling, global_myname(), 0x0);
make_nmb_name(&called , server, name_type);
again:
zero_ip(&ip);
if (have_ip)
ip = dest_ip;
/* have to open a new connection */
if (!(c=cli_initialise(NULL)) || (cli_set_port(c, port) != port) ||
!cli_connect(c, server_n, &ip)) {
d_printf("Connection to %s failed\n", server_n);
return NULL;
}
c->protocol = max_protocol;
c->use_kerberos = use_kerberos;
cli_setup_signing_state(c, signing_state);
if (!cli_session_request(c, &calling, &called)) {
char *p;
d_printf("session request to %s failed (%s)\n",
called.name, cli_errstr(c));
cli_shutdown(c);
if ((p=strchr_m(called.name, '.'))) {
*p = 0;
goto again;
}
if (strcmp(called.name, "*SMBSERVER")) {
make_nmb_name(&called , "*SMBSERVER", 0x20);
goto again;
}
return NULL;
}
DEBUG(4,(" session request ok\n"));
if (!cli_negprot(c)) {
d_printf("protocol negotiation failed\n");
cli_shutdown(c);
return NULL;
}
if (!got_pass) {
char *pass = getpass("Password: "******"", "", 0, "", 0, lp_workgroup())) {
d_printf("session setup failed: %s\n", cli_errstr(c));
if (NT_STATUS_V(cli_nt_error(c)) ==
NT_STATUS_V(NT_STATUS_MORE_PROCESSING_REQUIRED))
d_printf("did you forget to run kinit?\n");
cli_shutdown(c);
return NULL;
}
d_printf("Anonymous login successful\n");
}
if ( show_sessetup ) {
if (*c->server_domain) {
DEBUG(0,("Domain=[%s] OS=[%s] Server=[%s]\n",
c->server_domain,c->server_os,c->server_type));
} else if (*c->server_os || *c->server_type){
DEBUG(0,("OS=[%s] Server=[%s]\n",
c->server_os,c->server_type));
}
}
DEBUG(4,(" session setup ok\n"));
if (!cli_send_tconX(c, sharename, "?????",
password, strlen(password)+1)) {
d_printf("tree connect failed: %s\n", cli_errstr(c));
cli_shutdown(c);
return NULL;
}
DEBUG(4,(" tconx ok\n"));
return c;
}
NTSTATUS remote_password_change(const char *remote_machine, const char *user_name,
const char *old_passwd, const char *new_passwd,
char **err_str)
{
struct nmb_name calling, called;
struct cli_state *cli;
struct rpc_pipe_client *pipe_hnd;
struct sockaddr_storage ss;
NTSTATUS result;
bool pass_must_change = False;
*err_str = NULL;
if(!resolve_name( remote_machine, &ss, 0x20)) {
asprintf(err_str, "Unable to find an IP address for machine "
"%s.\n", remote_machine);
return NT_STATUS_UNSUCCESSFUL;
}
cli = cli_initialise();
if (!cli) {
return NT_STATUS_NO_MEMORY;
}
result = cli_connect(cli, remote_machine, &ss);
if (!NT_STATUS_IS_OK(result)) {
asprintf(err_str, "Unable to connect to SMB server on "
"machine %s. Error was : %s.\n",
remote_machine, nt_errstr(result));
cli_shutdown(cli);
return result;
}
make_nmb_name(&calling, global_myname() , 0x0);
make_nmb_name(&called , remote_machine, 0x20);
if (!cli_session_request(cli, &calling, &called)) {
asprintf(err_str, "machine %s rejected the session setup. "
"Error was : %s.\n",
remote_machine, cli_errstr(cli) );
result = cli_nt_error(cli);
cli_shutdown(cli);
return result;
}
cli->protocol = PROTOCOL_NT1;
if (!cli_negprot(cli)) {
asprintf(err_str, "machine %s rejected the negotiate "
"protocol. Error was : %s.\n",
remote_machine, cli_errstr(cli) );
result = cli_nt_error(cli);
cli_shutdown(cli);
return result;
}
/* Given things like SMB signing, restrict anonymous and the like,
try an authenticated connection first */
result = cli_session_setup(cli, user_name,
old_passwd, strlen(old_passwd)+1,
old_passwd, strlen(old_passwd)+1, "");
if (!NT_STATUS_IS_OK(result)) {
/* Password must change or Password expired are the only valid
* error conditions here from where we can proceed, the rest like
* account locked out or logon failure will lead to errors later
* anyway */
if (!NT_STATUS_EQUAL(result, NT_STATUS_PASSWORD_MUST_CHANGE) &&
!NT_STATUS_EQUAL(result, NT_STATUS_PASSWORD_EXPIRED)) {
asprintf(err_str, "Could not connect to machine %s: "
"%s\n", remote_machine, cli_errstr(cli));
cli_shutdown(cli);
return result;
}
pass_must_change = True;
/*
* We should connect as the anonymous user here, in case
* the server has "must change password" checked...
* Thanks to <*****@*****.**> for this fix.
*/
result = cli_session_setup(cli, "", "", 0, "", 0, "");
if (!NT_STATUS_IS_OK(result)) {
asprintf(err_str, "machine %s rejected the session "
"setup. Error was : %s.\n",
remote_machine, cli_errstr(cli) );
cli_shutdown(cli);
return result;
}
cli_init_creds(cli, "", "", NULL);
} else {
cli_init_creds(cli, user_name, "", old_passwd);
}
if (!cli_send_tconX(cli, "IPC$", "IPC", "", 1)) {
asprintf(err_str, "machine %s rejected the tconX on the IPC$ "
"share. Error was : %s.\n",
remote_machine, cli_errstr(cli) );
result = cli_nt_error(cli);
cli_shutdown(cli);
return result;
}
/* Try not to give the password away too easily */
if (!pass_must_change) {
pipe_hnd = cli_rpc_pipe_open_ntlmssp(cli,
PI_SAMR,
PIPE_AUTH_LEVEL_PRIVACY,
"", /* what domain... ? */
user_name,
old_passwd,
&result);
} else {
/*
* If the user password must be changed the ntlmssp bind will
* fail the same way as the session setup above did. The
* difference ist that with a pipe bind we don't get a good
* error message, the result will be that the rpc call below
* will just fail. So we do it anonymously, there's no other
* way.
*/
pipe_hnd = cli_rpc_pipe_open_noauth(cli, PI_SAMR, &result);
}
if (!pipe_hnd) {
if (lp_client_lanman_auth()) {
/* Use the old RAP method. */
if (!cli_oem_change_password(cli, user_name, new_passwd, old_passwd)) {
asprintf(err_str, "machine %s rejected the "
"password change: Error was : %s.\n",
remote_machine, cli_errstr(cli) );
result = cli_nt_error(cli);
cli_shutdown(cli);
return result;
}
} else {
asprintf(err_str, "SAMR connection to machine %s "
"failed. Error was %s, but LANMAN password "
"changed are disabled\n",
nt_errstr(result), remote_machine);
result = cli_nt_error(cli);
cli_shutdown(cli);
return result;
}
}
if (NT_STATUS_IS_OK(result = rpccli_samr_chgpasswd_user(pipe_hnd, pipe_hnd->mem_ctx, user_name,
new_passwd, old_passwd))) {
/* Great - it all worked! */
cli_shutdown(cli);
return NT_STATUS_OK;
} else if (!(NT_STATUS_EQUAL(result, NT_STATUS_ACCESS_DENIED)
|| NT_STATUS_EQUAL(result, NT_STATUS_UNSUCCESSFUL))) {
/* it failed, but for reasons such as wrong password, too short etc ... */
asprintf(err_str, "machine %s rejected the password change: "
"Error was : %s.\n",
remote_machine, get_friendly_nt_error_msg(result));
cli_shutdown(cli);
return result;
}
/* OK, that failed, so try again... */
cli_rpc_pipe_close(pipe_hnd);
/* Try anonymous NTLMSSP... */
cli_init_creds(cli, "", "", NULL);
result = NT_STATUS_UNSUCCESSFUL;
/* OK, this is ugly, but... try an anonymous pipe. */
pipe_hnd = cli_rpc_pipe_open_noauth(cli, PI_SAMR, &result);
if ( pipe_hnd &&
(NT_STATUS_IS_OK(result = rpccli_samr_chgpasswd_user(pipe_hnd,
pipe_hnd->mem_ctx,
user_name,
new_passwd,
old_passwd)))) {
/* Great - it all worked! */
cli_shutdown(cli);
return NT_STATUS_OK;
} else {
if (!(NT_STATUS_EQUAL(result, NT_STATUS_ACCESS_DENIED)
|| NT_STATUS_EQUAL(result, NT_STATUS_UNSUCCESSFUL))) {
/* it failed, but again it was due to things like new password too short */
asprintf(err_str, "machine %s rejected the "
"(anonymous) password change: Error was : "
"%s.\n", remote_machine,
get_friendly_nt_error_msg(result));
cli_shutdown(cli);
return result;
}
/* We have failed to change the user's password, and we think the server
just might not support SAMR password changes, so fall back */
if (lp_client_lanman_auth()) {
/* Use the old RAP method. */
if (cli_oem_change_password(cli, user_name, new_passwd, old_passwd)) {
/* SAMR failed, but the old LanMan protocol worked! */
cli_shutdown(cli);
return NT_STATUS_OK;
}
asprintf(err_str, "machine %s rejected the password "
"change: Error was : %s.\n",
remote_machine, cli_errstr(cli) );
result = cli_nt_error(cli);
cli_shutdown(cli);
return result;
} else {
asprintf(err_str, "SAMR connection to machine %s "
"failed. Error was %s, but LANMAN password "
"changed are disabled\n",
nt_errstr(result), remote_machine);
cli_shutdown(cli);
return NT_STATUS_UNSUCCESSFUL;
}
}
}
/*****************************************************
return a connection to a server
*******************************************************/
struct cli_state *connect_one(char *share)
{
struct cli_state *c;
struct nmb_name called, calling;
char *server_n;
char *server;
struct in_addr ip;
extern struct in_addr ipzero;
server = share+2;
share = strchr(server,'\\');
if (!share) return NULL;
*share = 0;
share++;
server_n = server;
ip = ipzero;
make_nmb_name(&calling, "masktest", 0x0, "");
make_nmb_name(&called , server, 0x20, "");
again:
ip = ipzero;
/* have to open a new connection */
if (!(c=cli_initialise(NULL)) || (cli_set_port(c, 139) == 0) ||
!cli_connect(c, server_n, &ip)) {
DEBUG(0,("Connection to %s failed\n", server_n));
return NULL;
}
if (!cli_session_request(c, &calling, &called)) {
DEBUG(0,("session request to %s failed\n", called.name));
cli_shutdown(c);
if (strcmp(called.name, "*SMBSERVER")) {
make_nmb_name(&called , "*SMBSERVER", 0x20, "");
goto again;
}
return NULL;
}
DEBUG(4,(" session request ok\n"));
if (!cli_negprot(c)) {
DEBUG(0,("protocol negotiation failed\n"));
cli_shutdown(c);
return NULL;
}
if (!got_pass) {
char *pass = getpass("Password: "******"session setup failed: %s\n", cli_errstr(c)));
return NULL;
}
/*
* These next two lines are needed to emulate
* old client behaviour for people who have
* scripts based on client output.
* QUESTION ? Do we want to have a 'client compatibility
* mode to turn these on/off ? JRA.
*/
if (*c->server_domain || *c->server_os || *c->server_type)
DEBUG(1,("Domain=[%s] OS=[%s] Server=[%s]\n",
c->server_domain,c->server_os,c->server_type));
DEBUG(4,(" session setup ok\n"));
if (!cli_send_tconX(c, share, "?????",
password, strlen(password)+1)) {
DEBUG(0,("tree connect failed: %s\n", cli_errstr(c)));
cli_shutdown(c);
return NULL;
}
DEBUG(4,(" tconx ok\n"));
return c;
}
static NTSTATUS cm_prepare_connection(const struct winbindd_domain *domain,
const int sockfd,
const int pipe_index,
const char *controller,
struct cli_state **cli,
BOOL *retry)
{
char *machine_password, *machine_krb5_principal;
char *ipc_username, *ipc_domain, *ipc_password;
BOOL got_mutex;
BOOL add_failed_connection = True;
NTSTATUS result = NT_STATUS_UNSUCCESSFUL;
struct sockaddr peeraddr;
socklen_t peeraddr_len;
struct sockaddr_in *peeraddr_in = (struct sockaddr_in *)&peeraddr;
machine_password = secrets_fetch_machine_password(lp_workgroup(), NULL,
NULL);
if (asprintf(&machine_krb5_principal, "%s$@%s", global_myname(),
lp_realm()) == -1) {
SAFE_FREE(machine_password);
return NT_STATUS_NO_MEMORY;
}
cm_get_ipc_userpass(&ipc_username, &ipc_domain, &ipc_password);
*retry = True;
got_mutex = secrets_named_mutex(controller,
WINBIND_SERVER_MUTEX_WAIT_TIME);
if (!got_mutex) {
DEBUG(0,("cm_open_connection: mutex grab failed for %s\n",
controller));
result = NT_STATUS_POSSIBLE_DEADLOCK;
goto done;
}
if ((*cli = cli_initialise(NULL)) == NULL) {
DEBUG(1, ("Could not cli_initialize\n"));
result = NT_STATUS_NO_MEMORY;
goto done;
}
(*cli)->timeout = 10000; /* 10 seconds */
(*cli)->fd = sockfd;
fstrcpy((*cli)->desthost, controller);
(*cli)->use_kerberos = True;
peeraddr_len = sizeof(peeraddr);
if ((getpeername((*cli)->fd, &peeraddr, &peeraddr_len) != 0) ||
(peeraddr_len != sizeof(struct sockaddr_in)) ||
(peeraddr_in->sin_family != PF_INET))
{
DEBUG(0,("cm_prepare_connection: %s\n", strerror(errno)));
goto done;
}
if (ntohs(peeraddr_in->sin_port) == 139) {
struct nmb_name calling;
struct nmb_name called;
make_nmb_name(&calling, global_myname(), 0x0);
make_nmb_name(&called, "*SMBSERVER", 0x20);
if (!cli_session_request(*cli, &calling, &called)) {
DEBUG(8, ("cli_session_request failed for %s\n",
controller));
goto done;
}
}
cli_setup_signing_state(*cli, Undefined);
if (!cli_negprot(*cli)) {
DEBUG(1, ("cli_negprot failed\n"));
cli_shutdown(*cli);
goto done;
}
/* Krb5 session */
if ((lp_security() == SEC_ADS)
&& ((*cli)->protocol >= PROTOCOL_NT1 &&
(*cli)->capabilities & CAP_EXTENDED_SECURITY)) {
ADS_STATUS ads_status;
(*cli)->use_kerberos = True;
DEBUG(5, ("connecting to %s from %s with kerberos principal "
"[%s]\n", controller, global_myname(),
machine_krb5_principal));
ads_status = cli_session_setup_spnego(*cli,
machine_krb5_principal,
machine_password,
lp_workgroup());
if (!ADS_ERR_OK(ads_status))
DEBUG(4,("failed kerberos session setup with %s\n",
ads_errstr(ads_status)));
result = ads_ntstatus(ads_status);
}
if (NT_STATUS_IS_OK(result))
goto session_setup_done;
/* Fall back to non-kerberos session setup */
(*cli)->use_kerberos = False;
if ((((*cli)->sec_mode & NEGOTIATE_SECURITY_CHALLENGE_RESPONSE) != 0) &&
(strlen(ipc_username) > 0)) {
/* Only try authenticated if we have a username */
DEBUG(5, ("connecting to %s from %s with username "
"[%s]\\[%s]\n", controller, global_myname(),
ipc_domain, ipc_username));
if (cli_session_setup(*cli, ipc_username,
ipc_password, strlen(ipc_password)+1,
ipc_password, strlen(ipc_password)+1,
ipc_domain)) {
DEBUG(5, ("authenticated session setup failed\n"));
goto session_setup_done;
}
}
/* Fall back to anonymous connection, this might fail later */
if (cli_session_setup(*cli, "", NULL, 0, NULL, 0, "")) {
DEBUG(5, ("Connected anonymously\n"));
goto session_setup_done;
}
result = cli_nt_error(*cli);
if (NT_STATUS_IS_OK(result))
result = NT_STATUS_UNSUCCESSFUL;
/* We can't session setup */
goto done;
session_setup_done:
if (!cli_send_tconX(*cli, "IPC$", "IPC", "", 0)) {
result = cli_nt_error(*cli);
DEBUG(1,("failed tcon_X with %s\n", nt_errstr(result)));
if (NT_STATUS_IS_OK(result))
result = NT_STATUS_UNSUCCESSFUL;
cli_shutdown(*cli);
goto done;
}
secrets_named_mutex_release(controller);
got_mutex = False;
*retry = False;
/* Windows 2003 SP1 does not lie LsaOpenPolicy() over schannel.
Returns RPC_NT_CANNOT_SUPPPORT (0xc0020041) for that call.
So just drop it on the lsarpc pipe */
if ( (domain->primary || IS_DC) && (pipe_index!=PI_LSARPC) ) {
NTSTATUS status = setup_schannel( *cli, domain->name );
if (!NT_STATUS_IS_OK(status)) {
DEBUG(3,("schannel refused - continuing without "
"schannel (%s)\n", nt_errstr(status)));
}
}
/* set the domain if empty; needed for schannel connections */
if ( !*(*cli)->domain )
fstrcpy( (*cli)->domain, domain->name );
if ( !cli_nt_session_open (*cli, pipe_index) ) {
result = NT_STATUS_PIPE_NOT_AVAILABLE;
/* This might be a NT4 DC */
if ( is_win2k_pipe(pipe_index) )
add_failed_connection = False;
cli_shutdown(*cli);
goto done;
}
result = NT_STATUS_OK;
add_failed_connection = False;
done:
if (got_mutex)
secrets_named_mutex_release(controller);
SAFE_FREE(machine_password);
SAFE_FREE(machine_krb5_principal);
SAFE_FREE(ipc_username);
SAFE_FREE(ipc_domain);
SAFE_FREE(ipc_password);
if (add_failed_connection)
add_failed_connection_entry(domain->name, controller, result);
return result;
}
/****************************************************************************
support for server level security
****************************************************************************/
struct cli_state *server_cryptkey(void)
{
fstring desthost;
struct in_addr dest_ip;
extern fstring local_machine;
char *p;
if (!cli_initialise(&cli))
return NULL;
for (p=strtok(lp_passwordserver(),LIST_SEP); p ; p = strtok(NULL,LIST_SEP)) {
fstrcpy(desthost,p);
standard_sub_basic(desthost);
strupper(desthost);
if(!resolve_name( desthost, &dest_ip)) {
DEBUG(1,("server_cryptkey: Can't resolve address for %s\n",p));
continue;
}
if (ismyip(dest_ip)) {
DEBUG(1,("Password server loop - disabling password server %s\n",p));
continue;
}
if (cli_connect(&cli, desthost, &dest_ip)) {
DEBUG(3,("connected to password server %s\n",p));
break;
}
}
if (!p) {
DEBUG(1,("password server not available\n"));
cli_shutdown(&cli);
return NULL;
}
if (!cli_session_request(&cli, desthost, 0x20, local_machine)) {
DEBUG(1,("%s rejected the session\n",desthost));
cli_shutdown(&cli);
return NULL;
}
DEBUG(3,("got session\n"));
if (!cli_negprot(&cli)) {
DEBUG(1,("%s rejected the negprot\n",desthost));
cli_shutdown(&cli);
return NULL;
}
if (cli.protocol < PROTOCOL_LANMAN2 ||
!(cli.sec_mode & 1)) {
DEBUG(1,("%s isn't in user level security mode\n",desthost));
cli_shutdown(&cli);
return NULL;
}
DEBUG(3,("password server OK\n"));
return &cli;
}
/****************************************************************************
send a session request. see rfc1002.txt 4.3 and 4.3.2
****************************************************************************/
BOOL cli_session_request(struct cli_state *cli,
const struct nmb_name *calling,
const struct nmb_name *called)
{
char *p;
int len = 4;
extern pstring user_socket_options;
io_struct ps;
uchar nb_type;
ZERO_STRUCT(ps);
io_init(&ps, 4096, MARSHALL);
/* send a session request (RFC 1002) */
smb_set_nbnames(cli->hnd, calling, called);
/* put in the destination name */
p = ps.data_p;
name_mangle(called->name, p, called->name_type);
len += name_len(p);
/* and my name */
p = ps.data_p + len-4;
name_mangle(calling->name, p, calling->name_type);
len += name_len(p);
ps.data_offset = len;
smb_send_smb(cli->hnd, &ps, 0x81);
io_free(&ps);
DEBUG(5, ("Sent session request: %s to %s\n",
nmb_namestr(calling), nmb_namestr(called)));
if (!smb_receive_smb(cli->hnd, &ps, &nb_type))
return False;
if (nb_type == 0x84)
{
int fd;
/* C. Hoch 9/14/95 Start */
/* For information, here is the response structure.
* We do the byte-twiddling to for portability.
struct RetargetResponse{
unsigned char type;
unsigned char flags;
int16 length;
int32 ip_addr;
int16 port;
};
*/
int port = (CVAL(ps.data_p, 4) << 8) + CVAL(ps.data_p, 5);
/* SESSION RETARGET */
putip((char *)&cli->dest_ip, ps.data_p);
fd = open_socket_out(SOCK_STREAM, &cli->dest_ip, port,
LONG_CONNECT_TIMEOUT);
if (fd == -1 || !smb_set_fd(cli->hnd, fd))
return False;
cli->dbg(3, "Retargeted\n");
set_socket_options(fd, user_socket_options);
/* Try again */
{
static int depth;
BOOL ret;
if (depth > 4)
{
cli->dbg( 0,
"Retarget recursion - failing\n");
return False;
}
depth++;
ret = cli_session_request(cli, calling, called);
depth--;
return ret;
}
} /* C. Hoch 9/14/95 End */
if (nb_type != 0x82)
{
/* This is the wrong place to put the error... JRA. */
cli->rap_error = CVAL(ps.data_p, 0);
return False;
}
return (True);
}
/*************************************************************
change a password on a remote machine using IPC calls
*************************************************************/
BOOL remote_password_change(const char *remote_machine, const char *user_name,
const char *old_passwd, const char *new_passwd,
char *err_str, size_t err_str_len)
{
struct nmb_name calling, called;
struct cli_state cli;
struct in_addr ip;
*err_str = '\0';
if(!resolve_name( remote_machine, &ip, 0x20)) {
slprintf(err_str, err_str_len-1, "unable to find an IP address for machine %s.\n",
remote_machine );
return False;
}
ZERO_STRUCT(cli);
if (!cli_initialise(&cli) || !cli_connect(&cli, remote_machine, &ip)) {
slprintf(err_str, err_str_len-1, "unable to connect to SMB server on machine %s. Error was : %s.\n",
remote_machine, cli_errstr(&cli) );
return False;
}
make_nmb_name(&calling, global_myname() , 0x0);
make_nmb_name(&called , remote_machine, 0x20);
if (!cli_session_request(&cli, &calling, &called)) {
slprintf(err_str, err_str_len-1, "machine %s rejected the session setup. Error was : %s.\n",
remote_machine, cli_errstr(&cli) );
cli_shutdown(&cli);
return False;
}
cli.protocol = PROTOCOL_NT1;
if (!cli_negprot(&cli)) {
slprintf(err_str, err_str_len-1, "machine %s rejected the negotiate protocol. Error was : %s.\n",
remote_machine, cli_errstr(&cli) );
cli_shutdown(&cli);
return False;
}
/*
* We should connect as the anonymous user here, in case
* the server has "must change password" checked...
* Thanks to <*****@*****.**> for this fix.
*/
if (!cli_session_setup(&cli, "", "", 0, "", 0, "")) {
slprintf(err_str, err_str_len-1, "machine %s rejected the session setup. Error was : %s.\n",
remote_machine, cli_errstr(&cli) );
cli_shutdown(&cli);
return False;
}
if (!cli_send_tconX(&cli, "IPC$", "IPC", "", 1)) {
slprintf(err_str, err_str_len-1, "machine %s rejected the tconX on the IPC$ share. Error was : %s.\n",
remote_machine, cli_errstr(&cli) );
cli_shutdown(&cli);
return False;
}
if(!cli_oem_change_password(&cli, user_name, new_passwd, old_passwd)) {
slprintf(err_str, err_str_len-1, "machine %s rejected the password change: Error was : %s.\n",
remote_machine, cli_errstr(&cli) );
cli_shutdown(&cli);
return False;
}
cli_shutdown(&cli);
return True;
}
/*****************************************************
return a connection to a server
*******************************************************/
static struct cli_state *connect_one(char *share, int snum)
{
struct cli_state *c;
struct nmb_name called, calling;
char *server_n;
fstring server;
struct in_addr ip;
fstring myname;
static int count;
fstrcpy(server,share+2);
share = strchr_m(server,'\\');
if (!share) return NULL;
*share = 0;
share++;
server_n = server;
zero_ip(&ip);
slprintf(myname,sizeof(myname), "lock-%lu-%u", (unsigned long)getpid(), count++);
make_nmb_name(&calling, myname, 0x0);
make_nmb_name(&called , server, 0x20);
again:
zero_ip(&ip);
/* have to open a new connection */
if (!(c=cli_initialise(NULL)) || !cli_connect(c, server_n, &ip)) {
DEBUG(0,("Connection to %s failed\n", server_n));
return NULL;
}
c->use_kerberos = use_kerberos;
if (!cli_session_request(c, &calling, &called)) {
DEBUG(0,("session request to %s failed\n", called.name));
cli_shutdown(c);
if (strcmp(called.name, "*SMBSERVER")) {
make_nmb_name(&called , "*SMBSERVER", 0x20);
goto again;
}
return NULL;
}
DEBUG(4,(" session request ok\n"));
if (!cli_negprot(c)) {
DEBUG(0,("protocol negotiation failed\n"));
cli_shutdown(c);
return NULL;
}
if (!got_pass) {
char *pass = getpass("Password: "******"session setup failed: %s\n", cli_errstr(c)));
return NULL;
}
/*
* These next two lines are needed to emulate
* old client behaviour for people who have
* scripts based on client output.
* QUESTION ? Do we want to have a 'client compatibility
* mode to turn these on/off ? JRA.
*/
if (*c->server_domain || *c->server_os || *c->server_type)
DEBUG(1,("Domain=[%s] OS=[%s] Server=[%s]\n",
c->server_domain,c->server_os,c->server_type));
DEBUG(4,(" session setup ok\n"));
if (!cli_send_tconX(c, share, "?????",
password[snum], strlen(password[snum])+1)) {
DEBUG(0,("tree connect failed: %s\n", cli_errstr(c)));
cli_shutdown(c);
return NULL;
}
DEBUG(4,(" tconx ok\n"));
c->use_oplocks = use_oplocks;
return c;
}