void ErrorDialog::error (const String& msg)
{
cmdline_error (msg);
messages.push_back (ErrorMsg (1, msg));
if (idle_connection.empty())
idle_connection = Glib::signal_idle().connect (sigc::ptr_fun (&display_errors));
}
static bool cmdline_check_unavailable(int flag, const char *p)
{
if (cmdline_tooltype & flag) {
cmdline_error("option \"%s\" not available in this tool", p);
return true;
}
return false;
}
int do_cmdline(int argc, char **argv, int do_everything, int *allow_launch,
struct gui_data *inst, Conf *conf)
{
int err = 0;
char *val;
/*
* Macros to make argument handling easier. Note that because
* they need to call `continue', they cannot be contained in
* the usual do {...} while (0) wrapper to make them
* syntactically single statements; hence it is not legal to
* use one of these macros as an unbraced statement between
* `if' and `else'.
*/
#define EXPECTS_ARG { \
if (--argc <= 0) { \
err = 1; \
fprintf(stderr, "%s: %s expects an argument\n", appname, p); \
continue; \
} else \
val = *++argv; \
}
#define SECOND_PASS_ONLY { if (!do_everything) continue; }
while (--argc > 0) {
char *p = *++argv;
int ret;
/*
* Shameless cheating. Debian requires all X terminal
* emulators to support `-T title'; but
* cmdline_process_param will eat -T (it means no-pty) and
* complain that pterm doesn't support it. So, in pterm
* only, we convert -T into -title.
*/
if ((cmdline_tooltype & TOOLTYPE_NONNETWORK) &&
!strcmp(p, "-T"))
p = (char*)"-title";
ret = cmdline_process_param(p, (argc > 1 ? argv[1] : NULL),
do_everything ? 1 : -1, conf);
if (ret == -2) {
cmdline_error("option \"%s\" requires an argument",p);
} else if (ret == 2) {
--argc, ++argv; /* skip next argument */
continue;
} else if (ret == 1) {
continue;
}
if (!strcmp(p, "-fn") || !strcmp(p, "-font")) {
FontSpec *fs;
EXPECTS_ARG;
SECOND_PASS_ONLY;
fs = fontspec_new(val);
conf_set_fontspec(conf, CONF_font, fs);
fontspec_free(fs);
} else if (!strcmp(p, "-fb")) {
FontSpec *fs;
EXPECTS_ARG;
SECOND_PASS_ONLY;
fs = fontspec_new(val);
conf_set_fontspec(conf, CONF_boldfont, fs);
fontspec_free(fs);
} else if (!strcmp(p, "-fw")) {
FontSpec *fs;
EXPECTS_ARG;
SECOND_PASS_ONLY;
fs = fontspec_new(val);
conf_set_fontspec(conf, CONF_widefont, fs);
fontspec_free(fs);
} else if (!strcmp(p, "-fwb")) {
FontSpec *fs;
EXPECTS_ARG;
SECOND_PASS_ONLY;
fs = fontspec_new(val);
conf_set_fontspec(conf, CONF_wideboldfont, fs);
fontspec_free(fs);
} else if (!strcmp(p, "-cs")) {
EXPECTS_ARG;
SECOND_PASS_ONLY;
conf_set_str(conf, CONF_line_codepage, val);
} else if (!strcmp(p, "-geometry")) {
#ifdef Q_OS_UNIX
int flags, x, y;
unsigned int w, h;
EXPECTS_ARG;
SECOND_PASS_ONLY;
flags = XParseGeometry(val, &x, &y, &w, &h);
if (flags & WidthValue)
conf_set_int(conf, CONF_width, w);
if (flags & HeightValue)
conf_set_int(conf, CONF_height, h);
if (flags & (XValue | YValue)) {
inst->xpos = x;
inst->ypos = y;
inst->gotpos = TRUE;
inst->gravity = ((flags & XNegative ? 1 : 0) |
(flags & YNegative ? 2 : 0));
}
#endif
} else if (!strcmp(p, "-sl")) {
EXPECTS_ARG;
SECOND_PASS_ONLY;
conf_set_int(conf, CONF_savelines, atoi(val));
} /*else if (!strcmp(p, "-fg") || !strcmp(p, "-bg") ||
!strcmp(p, "-bfg") || !strcmp(p, "-bbg") ||
!strcmp(p, "-cfg") || !strcmp(p, "-cbg")) {
GdkColor col;
EXPECTS_ARG;
SECOND_PASS_ONLY;
if (!gdk_color_parse(val, &col)) {
err = 1;
fprintf(stderr, "%s: unable to parse colour \"%s\"\n",
appname, val);
} else {
int index;
index = (!strcmp(p, "-fg") ? 0 :
!strcmp(p, "-bg") ? 2 :
!strcmp(p, "-bfg") ? 1 :
!strcmp(p, "-bbg") ? 3 :
!strcmp(p, "-cfg") ? 4 :
!strcmp(p, "-cbg") ? 5 : -1);
assert(index != -1);
cfg->colours[index][0] = col.red / 256;
cfg->colours[index][1] = col.green / 256;
cfg->colours[index][2] = col.blue / 256;
}
} */else if (use_pty_argv && !strcmp(p, "-e")) {
/* This option swallows all further arguments. */
if (!do_everything)
break;
if (--argc > 0) {
int i;
pty_argv = snewn(argc+1, char *);
++argv;
for (i = 0; i < argc; i++)
pty_argv[i] = argv[i];
pty_argv[argc] = NULL;
break; /* finished command-line processing */
} else
err = 1, fprintf(stderr, "%s: -e expects an argument\n",
appname);
} else if (!strcmp(p, "-title")) {
int cmdline_process_param(const char *p, char *value,
int need_save, Conf *conf)
{
int ret = 0;
if (p[0] != '-') {
if (need_save < 0)
return 0;
/*
* Common handling for the tools whose initial command-line
* arguments specify a hostname to connect to, i.e. PuTTY and
* Plink. Doesn't count the file transfer tools, because their
* hostname specification appears as part of a more
* complicated scheme.
*/
if ((cmdline_tooltype & TOOLTYPE_HOST_ARG) &&
!seen_hostname_argument &&
(!(cmdline_tooltype & TOOLTYPE_HOST_ARG_FROM_LAUNCHABLE_LOAD) ||
!loaded_session || !conf_launchable(conf))) {
/*
* Treat this argument as a host name, if we have not yet
* seen a host name argument or -load.
*
* Exception, in some tools (Plink): if we have seen -load
* but it didn't create a launchable session, then we
* still accept a hostname argument following that -load.
* This allows you to make saved sessions that configure
* lots of other stuff (colour schemes, terminal settings
* etc) and then say 'putty -load sessionname hostname'.
*
* Also, we carefully _don't_ test conf for launchability
* if we haven't been explicitly told to load a session
* (otherwise saving a host name into Default Settings
* would cause 'putty' on its own to immediately launch
* the default session and never be able to do anything
* else).
*/
if (!strncmp(p, "telnet:", 7)) {
/*
* If the argument starts with "telnet:", set the
* protocol to Telnet and process the string as a
* Telnet URL.
*/
/*
* Skip the "telnet:" or "telnet://" prefix.
*/
p += 7;
if (p[0] == '/' && p[1] == '/')
p += 2;
conf_set_int(conf, CONF_protocol, PROT_TELNET);
/*
* The next thing we expect is a host name.
*/
{
const char *host = p;
char *buf;
p += host_strcspn(p, ":/");
buf = dupprintf("%.*s", (int)(p - host), host);
conf_set_str(conf, CONF_host, buf);
sfree(buf);
seen_hostname_argument = true;
}
/*
* If the host name is followed by a colon, then
* expect a port number after it.
*/
if (*p == ':') {
p++;
conf_set_int(conf, CONF_port, atoi(p));
/*
* Set the flag that will stop us from treating
* the next argument as a separate port; this one
* counts as explicitly provided.
*/
seen_port_argument = true;
} else {
conf_set_int(conf, CONF_port, -1);
}
} else {
char *user = NULL, *hostname = NULL;
const char *hostname_after_user;
int port_override = -1;
size_t len;
/*
* Otherwise, treat it as a bare host name.
*/
if (cmdline_tooltype & TOOLTYPE_HOST_ARG_PROTOCOL_PREFIX) {
/*
* Here Plink checks for a comma-separated
* protocol prefix, e.g. 'ssh,hostname' or
* 'ssh,user@hostname'.
*
* I'm not entirely sure why; this behaviour dates
* from 2000 and isn't explained. But I _think_ it
* has to do with CVS transport or similar use
* cases, in which the end user invokes the SSH
* client indirectly, via some means that only
* lets them pass a single string argument, and it
* was occasionally useful to shoehorn the choice
* of protocol into that argument.
*/
const char *comma = strchr(p, ',');
if (comma) {
char *prefix = dupprintf("%.*s", (int)(comma - p), p);
const struct BackendVtable *vt =
backend_vt_from_name(prefix);
if (vt) {
default_protocol = vt->protocol;
conf_set_int(conf, CONF_protocol,
default_protocol);
port_override = vt->default_port;
} else {
cmdline_error("unrecognised protocol prefix '%s'",
prefix);
}
sfree(prefix);
p = comma + 1;
}
}
hostname_after_user = p;
if (cmdline_tooltype & TOOLTYPE_HOST_ARG_CAN_BE_SESSION) {
/*
* If the hostname argument can also be a saved
* session (see below), then here we also check
* for a user@ prefix, which will override the
* username from the saved session.
*
* (If the hostname argument _isn't_ a saved
* session, we don't do this.)
*/
const char *at = strrchr(p, '@');
if (at) {
user = dupprintf("%.*s", (int)(at - p), p);
hostname_after_user = at + 1;
}
}
/*
* Write the whole hostname argument (minus only that
* optional protocol prefix) into the existing Conf,
* for tools that don't treat it as a saved session
* and as a fallback for those that do.
*/
hostname = dupstr(p + strspn(p, " \t"));
len = strlen(hostname);
while (len > 0 && (hostname[len-1] == ' ' ||
hostname[len-1] == '\t'))
hostname[--len] = '\0';
seen_hostname_argument = true;
conf_set_str(conf, CONF_host, hostname);
if ((cmdline_tooltype & TOOLTYPE_HOST_ARG_CAN_BE_SESSION) &&
!loaded_session) {
/*
* For some tools, we equivocate between a
* hostname argument and an argument naming a
* saved session. Here we attempt to load a
* session with the specified name, and if that
* session exists and is launchable, we overwrite
* the entire Conf with it.
*
* We skip this check if a -load option has
* already happened, so that
*
* plink -load non-launchable-session hostname
*
* will treat 'hostname' as a hostname _even_ if a
* saved session called 'hostname' exists. (This
* doesn't lose any functionality someone could
* have needed, because if 'hostname' did cause a
* session to be loaded, then it would overwrite
* everything from the previously loaded session.
* So if that was the behaviour someone wanted,
* then they could get it by leaving off the
* -load completely.)
*/
Conf *conf2 = conf_new();
if (do_defaults(hostname_after_user, conf2) &&
conf_launchable(conf2)) {
conf_copy_into(conf, conf2);
loaded_session = true;
/* And override the username if one was given. */
if (user)
conf_set_str(conf, CONF_username, user);
}
conf_free(conf2);
}
sfree(hostname);
sfree(user);
if (port_override >= 0)
conf_set_int(conf, CONF_port, port_override);
}
return 1;
} else if ((cmdline_tooltype & TOOLTYPE_PORT_ARG) &&
!seen_port_argument) {
/*
* If we've already got a host name from the command line
* (either as a hostname argument or a qualifying -load),
* but not a port number, then treat the next argument as
* a port number.
*
* We handle this by calling ourself recursively to
* pretend we received a -P argument, so that it will be
* deferred until it's a good moment to run it.
*/
char *dup = dupstr(p); /* 'value' is not a const char * */
int retd = cmdline_process_param("-P", dup, 1, conf);
sfree(dup);
assert(retd == 2);
seen_port_argument = true;
return 1;
} else {
/*
* Refuse to recognise this argument, and give it back to
* the tool's own command-line processing.
*/
return 0;
}
}
#ifdef PUTTYNG
if (!stricmp(p, "-hwndparent")) {
RETURN(2);
hwnd_parent = atoi(value);
return 2;
}
#endif
if (!strcmp(p, "-load")) {
RETURN(2);
/* This parameter must be processed immediately rather than being
* saved. */
do_defaults(value, conf);
loaded_session = true;
cmdline_session_name = dupstr(value);
return 2;
}
if (!strcmp(p, "-ssh")) {
RETURN(1);
UNAVAILABLE_IN(TOOLTYPE_FILETRANSFER | TOOLTYPE_NONNETWORK);
SAVEABLE(0);
default_protocol = PROT_SSH;
default_port = 22;
conf_set_int(conf, CONF_protocol, default_protocol);
conf_set_int(conf, CONF_port, default_port);
return 1;
}
if (!strcmp(p, "-telnet")) {
RETURN(1);
UNAVAILABLE_IN(TOOLTYPE_FILETRANSFER | TOOLTYPE_NONNETWORK);
SAVEABLE(0);
default_protocol = PROT_TELNET;
default_port = 23;
conf_set_int(conf, CONF_protocol, default_protocol);
conf_set_int(conf, CONF_port, default_port);
return 1;
}
if (!strcmp(p, "-rlogin")) {
RETURN(1);
UNAVAILABLE_IN(TOOLTYPE_FILETRANSFER | TOOLTYPE_NONNETWORK);
SAVEABLE(0);
default_protocol = PROT_RLOGIN;
default_port = 513;
conf_set_int(conf, CONF_protocol, default_protocol);
conf_set_int(conf, CONF_port, default_port);
return 1;
}
if (!strcmp(p, "-raw")) {
RETURN(1);
UNAVAILABLE_IN(TOOLTYPE_FILETRANSFER | TOOLTYPE_NONNETWORK);
SAVEABLE(0);
default_protocol = PROT_RAW;
conf_set_int(conf, CONF_protocol, default_protocol);
}
if (!strcmp(p, "-serial")) {
RETURN(1);
/* Serial is not NONNETWORK in an odd sense of the word */
UNAVAILABLE_IN(TOOLTYPE_FILETRANSFER | TOOLTYPE_NONNETWORK);
SAVEABLE(0);
default_protocol = PROT_SERIAL;
conf_set_int(conf, CONF_protocol, default_protocol);
/* The host parameter will already be loaded into CONF_host,
* so copy it across */
conf_set_str(conf, CONF_serline, conf_get_str(conf, CONF_host));
}
if (!strcmp(p, "-v")) {
RETURN(1);
flags |= FLAG_VERBOSE;
}
if (!strcmp(p, "-l")) {
RETURN(2);
UNAVAILABLE_IN(TOOLTYPE_NONNETWORK);
SAVEABLE(0);
conf_set_str(conf, CONF_username, value);
}
if (!strcmp(p, "-loghost")) {
RETURN(2);
UNAVAILABLE_IN(TOOLTYPE_NONNETWORK);
SAVEABLE(0);
conf_set_str(conf, CONF_loghost, value);
}
if (!strcmp(p, "-hostkey")) {
char *dup;
RETURN(2);
UNAVAILABLE_IN(TOOLTYPE_NONNETWORK);
SAVEABLE(0);
dup = dupstr(value);
if (!validate_manual_hostkey(dup)) {
cmdline_error("'%s' is not a valid format for a manual host "
"key specification", value);
sfree(dup);
return ret;
}
conf_set_str_str(conf, CONF_ssh_manual_hostkeys, dup, "");
sfree(dup);
}
if ((!strcmp(p, "-L") || !strcmp(p, "-R") || !strcmp(p, "-D"))) {
char type, *q, *qq, *key, *val;
RETURN(2);
UNAVAILABLE_IN(TOOLTYPE_FILETRANSFER | TOOLTYPE_NONNETWORK);
SAVEABLE(0);
if (strcmp(p, "-D")) {
/*
* For -L or -R forwarding types:
*
* We expect _at least_ two colons in this string. The
* possible formats are `sourceport:desthost:destport',
* or `sourceip:sourceport:desthost:destport' if you're
* specifying a particular loopback address. We need to
* replace the one between source and dest with a \t;
* this means we must find the second-to-last colon in
* the string.
*
* (This looks like a foolish way of doing it given the
* existence of strrchr, but it's more efficient than
* two strrchrs - not to mention that the second strrchr
* would require us to modify the input string!)
*/
type = p[1]; /* 'L' or 'R' */
q = qq = host_strchr(value, ':');
while (qq) {
char *qqq = host_strchr(qq+1, ':');
if (qqq)
q = qq;
qq = qqq;
}
if (!q) {
cmdline_error("-%c expects at least two colons in its"
" argument", type);
return ret;
}
key = dupprintf("%c%.*s", type, (int)(q - value), value);
val = dupstr(q+1);
} else {
/*
* Dynamic port forwardings are entered under the same key
* as if they were local (because they occupy the same
* port space - a local and a dynamic forwarding on the
* same local port are mutually exclusive), with the
* special value "D" (which can be distinguished from
* anything in the ordinary -L case by containing no
* colon).
*/
key = dupprintf("L%s", value);
val = dupstr("D");
}
conf_set_str_str(conf, CONF_portfwd, key, val);
sfree(key);
sfree(val);
}
if ((!strcmp(p, "-nc"))) {
char *host, *portp;
RETURN(2);
UNAVAILABLE_IN(TOOLTYPE_FILETRANSFER | TOOLTYPE_NONNETWORK);
SAVEABLE(0);
portp = host_strchr(value, ':');
if (!portp) {
cmdline_error("-nc expects argument of form 'host:port'");
return ret;
}
host = dupprintf("%.*s", (int)(portp - value), value);
conf_set_str(conf, CONF_ssh_nc_host, host);
conf_set_int(conf, CONF_ssh_nc_port, atoi(portp + 1));
sfree(host);
}
if (!strcmp(p, "-m")) {
const char *filename;
FILE *fp;
RETURN(2);
UNAVAILABLE_IN(TOOLTYPE_FILETRANSFER | TOOLTYPE_NONNETWORK);
SAVEABLE(0);
filename = value;
fp = fopen(filename, "r");
if (!fp) {
cmdline_error("unable to open command file \"%s\"", filename);
return ret;
}
strbuf *command = strbuf_new();
char readbuf[4096];
while (1) {
size_t nread = fread(readbuf, 1, sizeof(readbuf), fp);
if (nread == 0)
break;
put_data(command, readbuf, nread);
}
fclose(fp);
conf_set_str(conf, CONF_remote_cmd, command->s);
conf_set_str(conf, CONF_remote_cmd2, "");
conf_set_bool(conf, CONF_nopty, true); /* command => no terminal */
strbuf_free(command);
}
if (!strcmp(p, "-P")) {
RETURN(2);
UNAVAILABLE_IN(TOOLTYPE_NONNETWORK);
SAVEABLE(1); /* lower priority than -ssh,-telnet */
conf_set_int(conf, CONF_port, atoi(value));
}
if (!strcmp(p, "-pw")) {
RETURN(2);
UNAVAILABLE_IN(TOOLTYPE_NONNETWORK);
SAVEABLE(1);
/* We delay evaluating this until after the protocol is decided,
* so that we can warn if it's of no use with the selected protocol */
if (conf_get_int(conf, CONF_protocol) != PROT_SSH)
cmdline_error("the -pw option can only be used with the "
"SSH protocol");
else {
cmdline_password = dupstr(value);
/* Assuming that `value' is directly from argv, make a good faith
* attempt to trample it, to stop it showing up in `ps' output
* on Unix-like systems. Not guaranteed, of course. */
smemclr(value, strlen(value));
}
}
if (!strcmp(p, "-agent") || !strcmp(p, "-pagent") ||
!strcmp(p, "-pageant")) {
RETURN(1);
UNAVAILABLE_IN(TOOLTYPE_NONNETWORK);
SAVEABLE(0);
conf_set_bool(conf, CONF_tryagent, true);
}
if (!strcmp(p, "-noagent") || !strcmp(p, "-nopagent") ||
!strcmp(p, "-nopageant")) {
RETURN(1);
UNAVAILABLE_IN(TOOLTYPE_NONNETWORK);
SAVEABLE(0);
conf_set_bool(conf, CONF_tryagent, false);
}
if (!strcmp(p, "-share")) {
RETURN(1);
UNAVAILABLE_IN(TOOLTYPE_NONNETWORK);
SAVEABLE(0);
conf_set_bool(conf, CONF_ssh_connection_sharing, true);
}
if (!strcmp(p, "-noshare")) {
RETURN(1);
UNAVAILABLE_IN(TOOLTYPE_NONNETWORK);
SAVEABLE(0);
conf_set_bool(conf, CONF_ssh_connection_sharing, false);
}
if (!strcmp(p, "-A")) {
RETURN(1);
UNAVAILABLE_IN(TOOLTYPE_FILETRANSFER | TOOLTYPE_NONNETWORK);
SAVEABLE(0);
conf_set_bool(conf, CONF_agentfwd, true);
}
if (!strcmp(p, "-a")) {
RETURN(1);
UNAVAILABLE_IN(TOOLTYPE_FILETRANSFER | TOOLTYPE_NONNETWORK);
SAVEABLE(0);
conf_set_bool(conf, CONF_agentfwd, false);
}
if (!strcmp(p, "-X")) {
RETURN(1);
UNAVAILABLE_IN(TOOLTYPE_FILETRANSFER | TOOLTYPE_NONNETWORK);
SAVEABLE(0);
conf_set_bool(conf, CONF_x11_forward, true);
}
if (!strcmp(p, "-x")) {
RETURN(1);
UNAVAILABLE_IN(TOOLTYPE_FILETRANSFER | TOOLTYPE_NONNETWORK);
SAVEABLE(0);
conf_set_bool(conf, CONF_x11_forward, false);
}
if (!strcmp(p, "-t")) {
RETURN(1);
UNAVAILABLE_IN(TOOLTYPE_FILETRANSFER | TOOLTYPE_NONNETWORK);
SAVEABLE(1); /* lower priority than -m */
conf_set_bool(conf, CONF_nopty, false);
}
if (!strcmp(p, "-T")) {
RETURN(1);
UNAVAILABLE_IN(TOOLTYPE_FILETRANSFER | TOOLTYPE_NONNETWORK);
SAVEABLE(1);
conf_set_bool(conf, CONF_nopty, true);
}
if (!strcmp(p, "-N")) {
RETURN(1);
UNAVAILABLE_IN(TOOLTYPE_FILETRANSFER | TOOLTYPE_NONNETWORK);
SAVEABLE(0);
conf_set_bool(conf, CONF_ssh_no_shell, true);
}
if (!strcmp(p, "-C")) {
RETURN(1);
UNAVAILABLE_IN(TOOLTYPE_NONNETWORK);
SAVEABLE(0);
conf_set_bool(conf, CONF_compression, true);
}
if (!strcmp(p, "-1")) {
RETURN(1);
UNAVAILABLE_IN(TOOLTYPE_NONNETWORK);
SAVEABLE(0);
conf_set_int(conf, CONF_sshprot, 0); /* ssh protocol 1 only */
}
if (!strcmp(p, "-2")) {
RETURN(1);
UNAVAILABLE_IN(TOOLTYPE_NONNETWORK);
SAVEABLE(0);
conf_set_int(conf, CONF_sshprot, 3); /* ssh protocol 2 only */
}
if (!strcmp(p, "-i")) {
Filename *fn;
RETURN(2);
UNAVAILABLE_IN(TOOLTYPE_NONNETWORK);
SAVEABLE(0);
fn = filename_from_str(value);
conf_set_filename(conf, CONF_keyfile, fn);
filename_free(fn);
}
if (!strcmp(p, "-4") || !strcmp(p, "-ipv4")) {
RETURN(1);
SAVEABLE(1);
conf_set_int(conf, CONF_addressfamily, ADDRTYPE_IPV4);
}
if (!strcmp(p, "-6") || !strcmp(p, "-ipv6")) {
RETURN(1);
SAVEABLE(1);
conf_set_int(conf, CONF_addressfamily, ADDRTYPE_IPV6);
}
if (!strcmp(p, "-sercfg")) {
char* nextitem;
RETURN(2);
UNAVAILABLE_IN(TOOLTYPE_FILETRANSFER | TOOLTYPE_NONNETWORK);
SAVEABLE(1);
if (conf_get_int(conf, CONF_protocol) != PROT_SERIAL)
cmdline_error("the -sercfg option can only be used with the "
"serial protocol");
/* Value[0] contains one or more , separated values, like 19200,8,n,1,X */
nextitem = value;
while (nextitem[0] != '\0') {
int length, skip;
char *end = strchr(nextitem, ',');
if (!end) {
length = strlen(nextitem);
skip = 0;
} else {
length = end - nextitem;
nextitem[length] = '\0';
skip = 1;
}
if (length == 1) {
switch (*nextitem) {
case '1':
case '2':
conf_set_int(conf, CONF_serstopbits, 2 * (*nextitem-'0'));
break;
case '5':
case '6':
case '7':
case '8':
case '9':
conf_set_int(conf, CONF_serdatabits, *nextitem-'0');
break;
case 'n':
conf_set_int(conf, CONF_serparity, SER_PAR_NONE);
break;
case 'o':
conf_set_int(conf, CONF_serparity, SER_PAR_ODD);
break;
case 'e':
conf_set_int(conf, CONF_serparity, SER_PAR_EVEN);
break;
case 'm':
conf_set_int(conf, CONF_serparity, SER_PAR_MARK);
break;
case 's':
conf_set_int(conf, CONF_serparity, SER_PAR_SPACE);
break;
case 'N':
conf_set_int(conf, CONF_serflow, SER_FLOW_NONE);
break;
case 'X':
conf_set_int(conf, CONF_serflow, SER_FLOW_XONXOFF);
break;
case 'R':
conf_set_int(conf, CONF_serflow, SER_FLOW_RTSCTS);
break;
case 'D':
conf_set_int(conf, CONF_serflow, SER_FLOW_DSRDTR);
break;
default:
cmdline_error("Unrecognised suboption \"-sercfg %c\"",
*nextitem);
}
} else if (length == 3 && !strncmp(nextitem,"1.5",3)) {
/* Messy special case */
conf_set_int(conf, CONF_serstopbits, 3);
} else {
int serspeed = atoi(nextitem);
if (serspeed != 0) {
conf_set_int(conf, CONF_serspeed, serspeed);
} else {
cmdline_error("Unrecognised suboption \"-sercfg %s\"",
nextitem);
}
}
nextitem += length + skip;
}
}
if (!strcmp(p, "-sessionlog")) {
Filename *fn;
RETURN(2);
UNAVAILABLE_IN(TOOLTYPE_FILETRANSFER);
/* but available even in TOOLTYPE_NONNETWORK, cf pterm "-log" */
SAVEABLE(0);
fn = filename_from_str(value);
conf_set_filename(conf, CONF_logfilename, fn);
conf_set_int(conf, CONF_logtype, LGTYP_DEBUG);
filename_free(fn);
}
if (!strcmp(p, "-sshlog") ||
!strcmp(p, "-sshrawlog")) {
Filename *fn;
RETURN(2);
UNAVAILABLE_IN(TOOLTYPE_NONNETWORK);
SAVEABLE(0);
fn = filename_from_str(value);
conf_set_filename(conf, CONF_logfilename, fn);
conf_set_int(conf, CONF_logtype,
!strcmp(p, "-sshlog") ? LGTYP_PACKETS :
/* !strcmp(p, "-sshrawlog") ? */ LGTYP_SSHRAW);
filename_free(fn);
}
if (!strcmp(p, "-proxycmd")) {
RETURN(2);
UNAVAILABLE_IN(TOOLTYPE_NONNETWORK);
SAVEABLE(0);
conf_set_int(conf, CONF_proxy_type, PROXY_CMD);
conf_set_str(conf, CONF_proxy_telnet_command, value);
}
#ifdef _WINDOWS
/*
* Cross-tool options only available on Windows.
*/
if (!strcmp(p, "-restrict-acl") || !strcmp(p, "-restrict_acl") ||
!strcmp(p, "-restrictacl")) {
RETURN(1);
restrict_process_acl();
restricted_acl = true;
}
#endif
return ret; /* unrecognised */
}
/*
* Process the command line.
*/
void CmdLineHandler::process_cmdline(LPSTR cmdline)
{
USES_CONVERSION;
char *p;
int got_host = 0;
/* By default, we bring up the config dialog, rather than launching
* a session. This gets set to TRUE if something happens to change
* that (e.g., a hostname is specified on the command-line). */
int allow_launch = FALSE;
default_protocol = be_default_protocol;
/* Find the appropriate default port. */
{
Backend *b = backend_from_proto(default_protocol);
default_port = 0; /* illegal */
if (b)
default_port = b->default_port;
}
cfg.logtype = LGTYP_NONE;
do_defaults(NULL, &cfg);
p = cmdline;
/*
* Process a couple of command-line options which are more
* easily dealt with before the line is broken up into words.
* These are the old-fashioned but convenient @sessionname and
* the internal-use-only &sharedmemoryhandle, neither of which
* are combined with anything else.
*/
while (*p && isspace(*p))
p++;
if (*p == '@') {
/*
* An initial @ means that the whole of the rest of the
* command line should be treated as the name of a saved
* session, with _no quoting or escaping_. This makes it a
* very convenient means of automated saved-session
* launching, via IDM_SAVEDSESS or Windows 7 jump lists.
*/
int i = strlen(p);
while (i > 1 && isspace(p[i - 1]))
i--;
p[i] = '\0';
do_defaults(p + 1, &cfg);
if (!cfg_launchable(&cfg) && !do_config()) {
return;
}
allow_launch = TRUE; /* allow it to be launched directly */
} else if (*p == '&') {
/*
* An initial & means we've been given a command line
* containing the hex value of a HANDLE for a file
* mapping object, which we must then extract as a
* config.
*/
HANDLE filemap;
Config *cp;
if (sscanf(p + 1, "%p", &filemap) == 1 &&
(cp = (Config*)MapViewOfFile(filemap, FILE_MAP_READ,
0, 0, sizeof(Config))) != NULL) {
cfg = *cp;
UnmapViewOfFile(cp);
CloseHandle(filemap);
} else if (!do_config()) {
cleanup_exit(0);
}
allow_launch = TRUE;
} else {
/*
* Otherwise, break up the command line and deal with
* it sensibly.
*/
int argc, i;
char **argv;
split_into_argv(cmdline, &argc, &argv, NULL);
for (i = 0; i < argc; i++) {
char *p = argv[i];
int ret;
ret = cmdline_process_param(p, i+1<argc?argv[i+1]:NULL,
1, &cfg);
if (ret == -2) {
cmdline_error("option \"%s\" requires an argument", p);
} else if (ret == 2) {
i++; /* skip next argument */
} else if (ret == 1) {
continue; /* nothing further needs doing */
} else if (!strcmp(p, "-cleanup") ||
!strcmp(p, "-cleanup-during-uninstall")) {
/*
* `putty -cleanup'. Remove all registry
* entries associated with PuTTY, and also find
* and delete the random seed file.
*/
char *s1, *s2;
/* Are we being invoked from an uninstaller? */
if (!strcmp(p, "-cleanup-during-uninstall")) {
s1 = dupprintf("Remove saved sessions and random seed file?\n"
"\n"
"If you hit Yes, ALL Registry entries associated\n"
"with %s will be removed, as well as the\n"
"random seed file. THIS PROCESS WILL\n"
"DESTROY YOUR SAVED SESSIONS.\n"
"(This only affects the currently logged-in user.)\n"
"\n"
"If you hit No, uninstallation will proceed, but\n"
"saved sessions etc will be left on the machine.",
appname);
s2 = dupprintf("%s Uninstallation", appname);
} else {
s1 = dupprintf("This procedure will remove ALL Registry entries\n"
"associated with %s, and will also remove\n"
"the random seed file. (This only affects the\n"
"currently logged-in user.)\n"
"\n"
"THIS PROCESS WILL DESTROY YOUR SAVED SESSIONS.\n"
"Are you really sure you want to continue?",
appname);
s2 = dupprintf("%s Warning", appname);
}
//if (message_box(A2W(s1), A2W(s2),
// MB_YESNO | MB_ICONWARNING | MB_DEFBUTTON2,
// HELPCTXID(option_cleanup)) == IDYES) {
if (MessageBox(WindowInterface::GetInstance()->getNativeTopWnd(), A2W(s1), A2W(s2),
MB_YESNO | MB_ICONWARNING | MB_DEFBUTTON2) == IDYES) {
gStorage->cleanup_all();
}
sfree(s1);
sfree(s2);
exit(0);
} else if (!strcmp(p, "-pgpfp")) {
pgp_fingerprints();
exit(1);
} else if (*p != '-') {
char *q = p;
if (got_host) {
/*
* If we already have a host name, treat
* this argument as a port number. NB we
* have to treat this as a saved -P
* argument, so that it will be deferred
* until it's a good moment to run it.
*/
int ret = cmdline_process_param("-P", p, 1, &cfg);
assert(ret == 2);
} else if (!strncmp(q, "telnet:", 7)) {
/*
* If the hostname starts with "telnet:",
* set the protocol to Telnet and process
* the string as a Telnet URL.
*/
char c;
q += 7;
if (q[0] == '/' && q[1] == '/')
q += 2;
cfg.protocol = PROT_TELNET;
p = q;
while (*p && *p != ':' && *p != '/')
p++;
c = *p;
if (*p)
*p++ = '\0';
if (c == ':')
cfg.port = atoi(p);
else
cfg.port = -1;
strncpy(cfg.host, q, sizeof(cfg.host) - 1);
cfg.host[sizeof(cfg.host) - 1] = '\0';
got_host = 1;
} else {
/*
* Otherwise, treat this argument as a host
* name.
*/
while (*p && !isspace(*p))
p++;
if (*p)
*p++ = '\0';
strncpy(cfg.host, q, sizeof(cfg.host) - 1);
cfg.host[sizeof(cfg.host) - 1] = '\0';
got_host = 1;
}
} else {
cmdline_error("unknown option \"%s\"", p);
}
}
}
cmdline_run_saved(&cfg);
if (loaded_session || got_host)
allow_launch = TRUE;
if ((!allow_launch || !cfg_launchable(&cfg)) && !do_config()) {
return ;
}
adjust_host(&cfg);
if (!strcmp(cfg.session_name, DEFAULT_SESSION_NAME)){
if (cfg.protocol == PROT_SERIAL)
snprintf(cfg.session_name, sizeof(cfg.session_name),
"tmp#%s:%d", cfg.serline, cfg.serspeed);
else
snprintf(cfg.session_name, sizeof(cfg.session_name),
"tmp#%s:%d", cfg.host, cfg.port);
save_settings(cfg.session_name, &cfg);
}
}