static int
xxxx_do_check( PKT_secret_key *sk, const char *tryagain_text, int mode,
int *canceled )
{
gpg_error_t err;
byte *buffer;
u16 csum=0;
int i, res;
size_t nbytes;
if( sk->is_protected ) { /* remove the protection */
DEK *dek = NULL;
u32 keyid[4]; /* 4! because we need two of them */
gcry_cipher_hd_t cipher_hd=NULL;
PKT_secret_key *save_sk;
if( sk->protect.s2k.mode == 1001 ) {
log_info(_("secret key parts are not available\n"));
return GPG_ERR_UNUSABLE_SECKEY;
}
if( sk->protect.algo == CIPHER_ALGO_NONE )
BUG();
if( openpgp_cipher_test_algo( sk->protect.algo ) ) {
log_info(_("protection algorithm %d%s is not supported\n"),
sk->protect.algo,sk->protect.algo==1?" (IDEA)":"" );
return GPG_ERR_CIPHER_ALGO;
}
if(gcry_md_test_algo (sk->protect.s2k.hash_algo))
{
log_info(_("protection digest %d is not supported\n"),
sk->protect.s2k.hash_algo);
return GPG_ERR_DIGEST_ALGO;
}
keyid_from_sk( sk, keyid );
keyid[2] = keyid[3] = 0;
if (!sk->flags.primary)
{
keyid[2] = sk->main_keyid[0];
keyid[3] = sk->main_keyid[1];
}
dek = passphrase_to_dek( keyid, sk->pubkey_algo, sk->protect.algo,
&sk->protect.s2k, mode,
tryagain_text, canceled );
if (!dek && canceled && *canceled)
return GPG_ERR_CANCELED;
err = openpgp_cipher_open (&cipher_hd, sk->protect.algo,
GCRY_CIPHER_MODE_CFB,
(GCRY_CIPHER_SECURE
| (sk->protect.algo >= 100 ?
0 : GCRY_CIPHER_ENABLE_SYNC)));
if (err)
log_fatal ("cipher open failed: %s\n", gpg_strerror (err) );
err = gcry_cipher_setkey (cipher_hd, dek->key, dek->keylen);
if (err)
log_fatal ("set key failed: %s\n", gpg_strerror (err) );
xfree(dek);
save_sk = copy_secret_key( NULL, sk );
gcry_cipher_setiv ( cipher_hd, sk->protect.iv, sk->protect.ivlen );
csum = 0;
if( sk->version >= 4 ) {
int ndata;
unsigned int ndatabits;
byte *p, *data;
u16 csumc = 0;
i = pubkey_get_npkey(sk->pubkey_algo);
assert ( gcry_mpi_get_flag (sk->skey[i], GCRYMPI_FLAG_OPAQUE ));
p = gcry_mpi_get_opaque ( sk->skey[i], &ndatabits );
ndata = (ndatabits+7)/8;
if ( ndata > 1 )
csumc = buf16_to_u16 (p+ndata-2);
data = xmalloc_secure ( ndata );
gcry_cipher_decrypt ( cipher_hd, data, ndata, p, ndata );
gcry_mpi_release (sk->skey[i]); sk->skey[i] = NULL ;
p = data;
if (sk->protect.sha1chk) {
/* This is the new SHA1 checksum method to detect
tampering with the key as used by the Klima/Rosa
attack */
sk->csum = 0;
csum = 1;
if( ndata < 20 )
log_error("not enough bytes for SHA-1 checksum\n");
else {
gcry_md_hd_t h;
if ( gcry_md_open (&h, DIGEST_ALGO_SHA1, 1))
BUG(); /* Algo not available. */
gcry_md_write (h, data, ndata - 20);
gcry_md_final (h);
if (!memcmp (gcry_md_read (h, DIGEST_ALGO_SHA1),
data + ndata - 20, 20) )
{
/* Digest does match. We have to keep the old
style checksum in sk->csum, so that the
test used for unprotected keys does work.
This test gets used when we are adding new
keys. */
sk->csum = csum = checksum (data, ndata-20);
}
gcry_md_close (h);
}
}
else {
if( ndata < 2 ) {
log_error("not enough bytes for checksum\n");
sk->csum = 0;
csum = 1;
}
else {
csum = checksum( data, ndata-2);
sk->csum = data[ndata-2] << 8 | data[ndata-1];
if ( sk->csum != csum ) {
/* This is a PGP 7.0.0 workaround */
sk->csum = csumc; /* take the encrypted one */
}
}
}
/* Must check it here otherwise the mpi_read_xx would fail
because the length may have an arbitrary value */
if( sk->csum == csum ) {
for( ; i < pubkey_get_nskey(sk->pubkey_algo); i++ ) {
if ( gcry_mpi_scan( &sk->skey[i], GCRYMPI_FMT_PGP,
p, ndata, &nbytes))
{
/* Checksum was okay, but not correctly
decrypted. */
sk->csum = 0;
csum = 1;
break;
}
ndata -= nbytes;
p += nbytes;
}
/* Note: at this point ndata should be 2 for a simple
checksum or 20 for the sha1 digest */
}
xfree(data);
}
else {
for(i=pubkey_get_npkey(sk->pubkey_algo);
i < pubkey_get_nskey(sk->pubkey_algo); i++ ) {
byte *p;
size_t ndata;
unsigned int ndatabits;
assert (gcry_mpi_get_flag (sk->skey[i], GCRYMPI_FLAG_OPAQUE));
p = gcry_mpi_get_opaque (sk->skey[i], &ndatabits);
ndata = (ndatabits+7)/8;
assert (ndata >= 2);
assert (ndata == ((p[0] << 8 | p[1]) + 7)/8 + 2);
buffer = xmalloc_secure (ndata);
gcry_cipher_sync (cipher_hd);
buffer[0] = p[0];
buffer[1] = p[1];
gcry_cipher_decrypt (cipher_hd, buffer+2, ndata-2,
p+2, ndata-2);
csum += checksum (buffer, ndata);
gcry_mpi_release (sk->skey[i]);
err = gcry_mpi_scan( &sk->skey[i], GCRYMPI_FMT_PGP,
buffer, ndata, &ndata );
xfree (buffer);
if (err)
{
/* Checksum was okay, but not correctly
decrypted. */
sk->csum = 0;
csum = 1;
break;
}
/* csum += checksum_mpi (sk->skey[i]); */
}
}
gcry_cipher_close ( cipher_hd );
/* Now let's see whether we have used the correct passphrase. */
if( csum != sk->csum ) {
copy_secret_key( sk, save_sk );
passphrase_clear_cache ( keyid, NULL, sk->pubkey_algo );
free_secret_key( save_sk );
return gpg_error (GPG_ERR_BAD_PASSPHRASE);
}
/* The checksum may fail, so we also check the key itself. */
res = pk_check_secret_key ( sk->pubkey_algo, sk->skey );
if( res ) {
copy_secret_key( sk, save_sk );
passphrase_clear_cache ( keyid, NULL, sk->pubkey_algo );
free_secret_key( save_sk );
return gpg_error (GPG_ERR_BAD_PASSPHRASE);
}
free_secret_key( save_sk );
sk->is_protected = 0;
}
else { /* not protected, assume it is okay if the checksum is okay */
csum = 0;
for(i=pubkey_get_npkey(sk->pubkey_algo);
i < pubkey_get_nskey(sk->pubkey_algo); i++ ) {
csum += checksum_mpi( sk->skey[i] );
}
if( csum != sk->csum )
return GPG_ERR_CHECKSUM;
}
return 0;
}
/* If keyblock_out is non-NULL, AND the exit code is zero, then it
contains a pointer to the first keyblock found and exported. No
other keyblocks are exported. The caller must free it. */
static int
do_export_stream( IOBUF out, strlist_t users, int secret,
KBNODE *keyblock_out, unsigned int options, int *any )
{
int rc = 0;
PACKET pkt;
KBNODE keyblock = NULL;
KBNODE kbctx, node;
size_t ndesc, descindex;
KEYDB_SEARCH_DESC *desc = NULL;
subkey_list_t subkey_list = NULL; /* Track alreay processed subkeys. */
KEYDB_HANDLE kdbhd;
strlist_t sl;
int indent = 0;
*any = 0;
init_packet( &pkt );
kdbhd = keydb_new (secret);
if (!users) {
ndesc = 1;
desc = xcalloc ( ndesc, sizeof *desc );
desc[0].mode = KEYDB_SEARCH_MODE_FIRST;
}
else {
for (ndesc=0, sl=users; sl; sl = sl->next, ndesc++)
;
desc = xmalloc ( ndesc * sizeof *desc);
for (ndesc=0, sl=users; sl; sl = sl->next) {
if (classify_user_id (sl->d, desc+ndesc))
ndesc++;
else
log_error (_("key \"%s\" not found: %s\n"),
sl->d, g10_errstr (G10ERR_INV_USER_ID));
}
/* It would be nice to see which of the given users did
actually match one in the keyring. To implement this we
need to have a found flag for each entry in desc and to set
this we must check all those entries after a match to mark
all matched one - currently we stop at the first match. To
do this we need an extra flag to enable this feature so */
}
#ifdef ENABLE_SELINUX_HACKS
if (secret) {
log_error (_("exporting secret keys not allowed\n"));
rc = G10ERR_GENERAL;
goto leave;
}
#endif
while (!(rc = keydb_search2 (kdbhd, desc, ndesc, &descindex))) {
int sha1_warned=0,skip_until_subkey=0;
u32 sk_keyid[2];
if (!users)
desc[0].mode = KEYDB_SEARCH_MODE_NEXT;
/* Read the keyblock. */
rc = keydb_get_keyblock (kdbhd, &keyblock );
if( rc ) {
log_error (_("error reading keyblock: %s\n"), g10_errstr(rc) );
goto leave;
}
if((node=find_kbnode(keyblock,PKT_SECRET_KEY)))
{
PKT_secret_key *sk=node->pkt->pkt.secret_key;
keyid_from_sk(sk,sk_keyid);
/* We can't apply GNU mode 1001 on an unprotected key. */
if( secret == 2 && !sk->is_protected )
{
log_info(_("key %s: not protected - skipped\n"),
keystr(sk_keyid));
continue;
}
/* No v3 keys with GNU mode 1001. */
if( secret == 2 && sk->version == 3 )
{
log_info(_("key %s: PGP 2.x style key - skipped\n"),
keystr(sk_keyid));
continue;
}
/* It does not make sense to export a key with a primary
key on card using a non-key stub. We simply skip those
keys when used with --export-secret-subkeys. */
if (secret == 2 && sk->is_protected
&& sk->protect.s2k.mode == 1002 )
{
log_info(_("key %s: key material on-card - skipped\n"),
keystr(sk_keyid));
continue;
}
}
else
{
/* It's a public key export, so do the cleaning if
requested. Note that both export-clean and
export-minimal only apply to UID sigs (0x10, 0x11,
0x12, and 0x13). A designated revocation is never
stripped, even with export-minimal set. */
if(options&EXPORT_CLEAN)
clean_key(keyblock,opt.verbose,options&EXPORT_MINIMAL,NULL,NULL);
}
/* And write it. */
for( kbctx=NULL; (node = walk_kbnode( keyblock, &kbctx, 0 )); ) {
if( skip_until_subkey )
{
if(node->pkt->pkttype==PKT_PUBLIC_SUBKEY
|| node->pkt->pkttype==PKT_SECRET_SUBKEY)
skip_until_subkey=0;
else
continue;
}
/* We used to use comment packets, but not any longer. In
case we still have comments on a key, strip them here
before we call build_packet(). */
if( node->pkt->pkttype == PKT_COMMENT )
continue;
/* Make sure that ring_trust packets never get exported. */
if (node->pkt->pkttype == PKT_RING_TRUST)
continue;
/* If exact is set, then we only export what was requested
(plus the primary key, if the user didn't specifically
request it). */
if(desc[descindex].exact
&& (node->pkt->pkttype==PKT_PUBLIC_SUBKEY
|| node->pkt->pkttype==PKT_SECRET_SUBKEY))
{
if (!exact_subkey_match_p (desc+descindex, node))
{
/* Before skipping this subkey, check whether any
other description wants an exact match on a
subkey and include that subkey into the output
too. Need to add this subkey to a list so that
it won't get processed a second time.
So the first step here is to check that list and
skip in any case if the key is in that list.
We need this whole mess because the import
function is not able to merge secret keys and
thus it is useless to output them as two
separate keys and have import merge them. */
if (subkey_in_list_p (subkey_list, node))
skip_until_subkey = 1; /* Already processed this one. */
else
{
size_t j;
for (j=0; j < ndesc; j++)
if (j != descindex && desc[j].exact
&& exact_subkey_match_p (desc+j, node))
break;
if (!(j < ndesc))
skip_until_subkey = 1; /* No other one matching. */
}
}
if(skip_until_subkey)
continue;
/* Mark this one as processed. */
{
subkey_list_t tmp = new_subkey_list_item (node);
tmp->next = subkey_list;
subkey_list = tmp;
}
}
if(node->pkt->pkttype==PKT_SIGNATURE)
{
/* do not export packets which are marked as not
exportable */
if(!(options&EXPORT_LOCAL_SIGS)
&& !node->pkt->pkt.signature->flags.exportable)
continue; /* not exportable */
/* Do not export packets with a "sensitive" revocation
key unless the user wants us to. Note that we do
export these when issuing the actual revocation
(see revoke.c). */
if(!(options&EXPORT_SENSITIVE_REVKEYS)
&& node->pkt->pkt.signature->revkey)
{
int i;
for(i=0;i<node->pkt->pkt.signature->numrevkeys;i++)
if(node->pkt->pkt.signature->revkey[i]->class & 0x40)
break;
if(i<node->pkt->pkt.signature->numrevkeys)
continue;
}
}
/* Don't export attribs? */
if( !(options&EXPORT_ATTRIBUTES) &&
node->pkt->pkttype == PKT_USER_ID &&
node->pkt->pkt.user_id->attrib_data ) {
/* Skip until we get to something that is not an attrib
or a signature on an attrib */
while(kbctx->next && kbctx->next->pkt->pkttype==PKT_SIGNATURE) {
kbctx=kbctx->next;
}
continue;
}
if( secret == 2 && node->pkt->pkttype == PKT_SECRET_KEY )
{
/* We don't want to export the secret parts of the
* primary key, this is done by using GNU protection mode 1001
*/
int save_mode = node->pkt->pkt.secret_key->protect.s2k.mode;
node->pkt->pkt.secret_key->protect.s2k.mode = 1001;
if ((options&EXPORT_SEXP_FORMAT))
rc = build_sexp (out, node->pkt, &indent);
else
rc = build_packet (out, node->pkt);
node->pkt->pkt.secret_key->protect.s2k.mode = save_mode;
}
else if (secret == 2 && node->pkt->pkttype == PKT_SECRET_SUBKEY
&& (opt.export_options&EXPORT_RESET_SUBKEY_PASSWD))
{
/* If the subkey is protected reset the passphrase to
export an unprotected subkey. This feature is
useful in cases of a subkey copied to an unattended
machine where a passphrase is not required. */
PKT_secret_key *sk_save, *sk;
sk_save = node->pkt->pkt.secret_key;
sk = copy_secret_key (NULL, sk_save);
node->pkt->pkt.secret_key = sk;
log_info (_("about to export an unprotected subkey\n"));
switch (is_secret_key_protected (sk))
{
case -1:
rc = G10ERR_PUBKEY_ALGO;
break;
case 0:
break;
default:
if (sk->protect.s2k.mode == 1001)
; /* No secret parts. */
else if( sk->protect.s2k.mode == 1002 )
; /* Card key stub. */
else
{
rc = check_secret_key( sk, 0 );
}
break;
}
if (rc)
{
node->pkt->pkt.secret_key = sk_save;
free_secret_key (sk);
log_error (_("failed to unprotect the subkey: %s\n"),
g10_errstr (rc));
goto leave;
}
if ((options&EXPORT_SEXP_FORMAT))
rc = build_sexp (out, node->pkt, &indent);
else
rc = build_packet (out, node->pkt);
node->pkt->pkt.secret_key = sk_save;
free_secret_key (sk);
}
else
{
/* Warn the user if the secret key or any of the secret
subkeys are protected with SHA1 and we have
simple_sk_checksum set. */
if(!sha1_warned && opt.simple_sk_checksum &&
(node->pkt->pkttype==PKT_SECRET_KEY ||
node->pkt->pkttype==PKT_SECRET_SUBKEY) &&
node->pkt->pkt.secret_key->protect.sha1chk)
{
/* I hope this warning doesn't confuse people. */
log_info(_("WARNING: secret key %s does not have a "
"simple SK checksum\n"),keystr(sk_keyid));
sha1_warned=1;
}
if ((options&EXPORT_SEXP_FORMAT))
rc = build_sexp (out, node->pkt, &indent);
else
rc = build_packet (out, node->pkt);
}
if( rc ) {
log_error("build_packet(%d) failed: %s\n",
node->pkt->pkttype, g10_errstr(rc) );
goto leave;
}
}
if ((options&EXPORT_SEXP_FORMAT) && indent)
{
for (; indent; indent--)
iobuf_put (out, ')');
iobuf_put (out, '\n');
}
++*any;
if(keyblock_out)
{
*keyblock_out=keyblock;
break;
}
}
