/*
* setup new property values within new_def_info;
* these are used later to udpate nvram
*/
static int
cpr_prop_setup(void)
{
int len, err, ds_ival, dev_idx, file_idx;
char bootdev[OBP_MAXPATHLEN], bootfile[OBP_MAXPATHLEN];
char *cp, *sp;
/*
* create a new boot-device value. for some older prom revs,
* a fully qualified device path can be truncated when stored
* to nvram. this call generates the shortest equivalent.
* using devaliases could be simpler in most cases.
*/
cpr_abbreviate_devpath(prom_bootpath(), bootdev);
/*
* create a new boot-file value; flags get appended when
* not reusable and when the statefile is a block device
*/
(void) strcpy(bootfile, CPRBOOT);
if (!cpr_reusable_mode && cpr_statefile_is_spec())
sp = " -S ";
else
sp = NULL;
if (sp) {
(void) strcat(bootfile, sp);
len = strlen(bootfile);
sp = cpr_get_statefile_prom_path();
cpr_abbreviate_devpath(sp, &bootfile[len]);
}
/*
* record property info for booting with cprboot based on
* the value of diag-switch?. when "false", set boot-device
* and boot-file; when "true", set diag-device and diag-file
*/
if (err = cpr_get_bool_prop("diag-switch?", &ds_ival))
return (err);
else if (ds_ival == 0) {
dev_idx = CPR_BD_IDX;
file_idx = CPR_BF_IDX;
} else {
dev_idx = CPR_DD_IDX;
file_idx = CPR_DF_IDX;
}
cpr_prop_update(dev_idx, bootdev);
if (!cpr_reusable_mode)
cpr_prop_update(file_idx, bootfile);
/*
* check/set auto-boot?
*/
sp = orig_def_info.props[CPR_AB_IDX].value;
cp = "true";
if (strcmp(sp, cp))
cpr_prop_update(CPR_AB_IDX, cp);
return (0);
}
int
cpr(int fcn, void *mdep)
{
#if defined(__sparc)
static const char noswapstr[] = "reusable statefile requires "
"that no swap area be configured.\n";
static const char blockstr[] = "reusable statefile must be "
"a block device. See power.conf(4) and pmconfig(1M).\n";
static const char normalfmt[] = "cannot run normal "
"checkpoint/resume when in reusable statefile mode. "
"use uadmin A_FREEZE AD_REUSEFINI (uadmin %d %d) "
"to exit reusable statefile mode.\n";
static const char modefmt[] = "%s in reusable mode.\n";
#endif
register int rc = 0;
int cpr_sleeptype;
/*
* First, reject commands that we don't (yet) support on this arch.
* This is easier to understand broken out like this than grotting
* through the second switch below.
*/
switch (fcn) {
#if defined(__sparc)
case AD_CHECK_SUSPEND_TO_RAM:
case AD_SUSPEND_TO_RAM:
return (ENOTSUP);
case AD_CHECK_SUSPEND_TO_DISK:
case AD_SUSPEND_TO_DISK:
case AD_CPR_REUSEINIT:
case AD_CPR_NOCOMPRESS:
case AD_CPR_FORCE:
case AD_CPR_REUSABLE:
case AD_CPR_REUSEFINI:
case AD_CPR_TESTZ:
case AD_CPR_TESTNOZ:
case AD_CPR_TESTHALT:
case AD_CPR_SUSP_DEVICES:
cpr_sleeptype = CPR_TODISK;
break;
#endif
#if defined(__x86)
case AD_CHECK_SUSPEND_TO_DISK:
case AD_SUSPEND_TO_DISK:
case AD_CPR_REUSEINIT:
case AD_CPR_NOCOMPRESS:
case AD_CPR_FORCE:
case AD_CPR_REUSABLE:
case AD_CPR_REUSEFINI:
case AD_CPR_TESTZ:
case AD_CPR_TESTNOZ:
case AD_CPR_TESTHALT:
case AD_CPR_PRINT:
return (ENOTSUP);
/* The DEV_* values need to be removed after sys-syspend is fixed */
case DEV_CHECK_SUSPEND_TO_RAM:
case DEV_SUSPEND_TO_RAM:
case AD_CPR_SUSP_DEVICES:
case AD_CHECK_SUSPEND_TO_RAM:
case AD_SUSPEND_TO_RAM:
case AD_LOOPBACK_SUSPEND_TO_RAM_PASS:
case AD_LOOPBACK_SUSPEND_TO_RAM_FAIL:
case AD_FORCE_SUSPEND_TO_RAM:
case AD_DEVICE_SUSPEND_TO_RAM:
cpr_sleeptype = CPR_TORAM;
break;
#endif
}
#if defined(__sparc)
/*
* Need to know if we're in reusable mode, but we will likely have
* rebooted since REUSEINIT, so we have to get the info from the
* file system
*/
if (!cpr_reusable_mode)
cpr_reusable_mode = cpr_get_reusable_mode();
cpr_forget_cprconfig();
#endif
switch (fcn) {
#if defined(__sparc)
case AD_CPR_REUSEINIT:
if (!i_cpr_reusable_supported())
return (ENOTSUP);
if (!cpr_statefile_is_spec()) {
cpr_err(CE_CONT, blockstr);
return (EINVAL);
}
if ((rc = cpr_check_spec_statefile()) != 0)
return (rc);
if (swapinfo) {
cpr_err(CE_CONT, noswapstr);
return (EINVAL);
}
cpr_test_mode = 0;
break;
case AD_CPR_NOCOMPRESS:
case AD_CPR_COMPRESS:
case AD_CPR_FORCE:
if (cpr_reusable_mode) {
cpr_err(CE_CONT, normalfmt, A_FREEZE, AD_REUSEFINI);
return (ENOTSUP);
}
cpr_test_mode = 0;
break;
case AD_CPR_REUSABLE:
if (!i_cpr_reusable_supported())
return (ENOTSUP);
if (!cpr_statefile_is_spec()) {
cpr_err(CE_CONT, blockstr);
return (EINVAL);
}
if ((rc = cpr_check_spec_statefile()) != 0)
return (rc);
if (swapinfo) {
cpr_err(CE_CONT, noswapstr);
return (EINVAL);
}
if ((rc = cpr_reusable_mount_check()) != 0)
return (rc);
cpr_test_mode = 0;
break;
case AD_CPR_REUSEFINI:
if (!i_cpr_reusable_supported())
return (ENOTSUP);
cpr_test_mode = 0;
break;
case AD_CPR_TESTZ:
case AD_CPR_TESTNOZ:
case AD_CPR_TESTHALT:
if (cpr_reusable_mode) {
cpr_err(CE_CONT, normalfmt, A_FREEZE, AD_REUSEFINI);
return (ENOTSUP);
}
cpr_test_mode = 1;
break;
case AD_CPR_CHECK:
if (!i_cpr_is_supported(cpr_sleeptype) || cpr_reusable_mode)
return (ENOTSUP);
return (0);
case AD_CPR_PRINT:
CPR_STAT_EVENT_END("POST CPR DELAY");
cpr_stat_event_print();
return (0);
#endif
case AD_CPR_DEBUG0:
cpr_debug = 0;
return (0);
case AD_CPR_DEBUG1:
case AD_CPR_DEBUG2:
case AD_CPR_DEBUG3:
case AD_CPR_DEBUG4:
case AD_CPR_DEBUG5:
case AD_CPR_DEBUG7:
case AD_CPR_DEBUG8:
cpr_debug |= CPR_DEBUG_BIT(fcn);
return (0);
case AD_CPR_DEBUG9:
cpr_debug |= CPR_DEBUG6;
return (0);
/* The DEV_* values need to be removed after sys-syspend is fixed */
case DEV_CHECK_SUSPEND_TO_RAM:
case DEV_SUSPEND_TO_RAM:
case AD_CHECK_SUSPEND_TO_RAM:
case AD_SUSPEND_TO_RAM:
cpr_test_point = LOOP_BACK_NONE;
break;
case AD_LOOPBACK_SUSPEND_TO_RAM_PASS:
cpr_test_point = LOOP_BACK_PASS;
break;
case AD_LOOPBACK_SUSPEND_TO_RAM_FAIL:
cpr_test_point = LOOP_BACK_FAIL;
break;
case AD_FORCE_SUSPEND_TO_RAM:
cpr_test_point = FORCE_SUSPEND_TO_RAM;
break;
case AD_DEVICE_SUSPEND_TO_RAM:
if (mdep == NULL) {
/* Didn't pass enough arguments */
return (EINVAL);
}
cpr_test_point = DEVICE_SUSPEND_TO_RAM;
cpr_device = (major_t)atoi((char *)mdep);
break;
case AD_CPR_SUSP_DEVICES:
cpr_test_point = FORCE_SUSPEND_TO_RAM;
if (cpr_suspend_devices(ddi_root_node()) != DDI_SUCCESS)
cmn_err(CE_WARN,
"Some devices did not suspend "
"and may be unusable");
(void) cpr_resume_devices(ddi_root_node(), 0);
return (0);
default:
return (ENOTSUP);
}
if (!i_cpr_is_supported(cpr_sleeptype))
return (ENOTSUP);
#if defined(__sparc)
if ((cpr_sleeptype == CPR_TODISK &&
!cpr_is_ufs(rootvfs) && !cpr_is_zfs(rootvfs)))
return (ENOTSUP);
#endif
if (fcn == AD_CHECK_SUSPEND_TO_RAM ||
fcn == DEV_CHECK_SUSPEND_TO_RAM) {
ASSERT(i_cpr_is_supported(cpr_sleeptype));
return (0);
}
#if defined(__sparc)
if (fcn == AD_CPR_REUSEINIT) {
if (mutex_tryenter(&cpr_slock) == 0)
return (EBUSY);
if (cpr_reusable_mode) {
cpr_err(CE_CONT, modefmt, "already");
mutex_exit(&cpr_slock);
return (EBUSY);
}
rc = i_cpr_reuseinit();
mutex_exit(&cpr_slock);
return (rc);
}
if (fcn == AD_CPR_REUSEFINI) {
if (mutex_tryenter(&cpr_slock) == 0)
return (EBUSY);
if (!cpr_reusable_mode) {
cpr_err(CE_CONT, modefmt, "not");
mutex_exit(&cpr_slock);
return (EINVAL);
}
rc = i_cpr_reusefini();
mutex_exit(&cpr_slock);
return (rc);
}
#endif
/*
* acquire cpr serial lock and init cpr state structure.
*/
if (rc = cpr_init(fcn))
return (rc);
#if defined(__sparc)
if (fcn == AD_CPR_REUSABLE) {
if ((rc = i_cpr_check_cprinfo()) != 0) {
mutex_exit(&cpr_slock);
return (rc);
}
}
#endif
/*
* Call the main cpr routine. If we are successful, we will be coming
* down from the resume side, otherwise we are still in suspend.
*/
cpr_err(CE_CONT, "System is being suspended");
if (rc = cpr_main(cpr_sleeptype)) {
CPR->c_flags |= C_ERROR;
PMD(PMD_SX, ("cpr: Suspend operation failed.\n"))
cpr_err(CE_NOTE, "Suspend operation failed.");
} else if (CPR->c_flags & C_SUSPENDING) {
/*
* In the suspend to RAM case, by the time we get
* control back we're already resumed
*/
if (cpr_sleeptype == CPR_TORAM) {
PMD(PMD_SX, ("cpr: cpr CPR_TORAM done\n"))
cpr_done();
return (rc);
}
#if defined(__sparc)
PMD(PMD_SX, ("cpr: Suspend operation succeeded.\n"))
/*
* Back from a successful checkpoint
*/
if (fcn == AD_CPR_TESTZ || fcn == AD_CPR_TESTNOZ) {
mdboot(0, AD_BOOT, "", B_FALSE);
/* NOTREACHED */
}
/* make sure there are no more changes to the device tree */
PMD(PMD_SX, ("cpr: dev tree freeze\n"))
devtree_freeze();
/*
* stop other cpus and raise our priority. since there is only
* one active cpu after this, and our priority will be too high
* for us to be preempted, we're essentially single threaded
* from here on out.
*/
PMD(PMD_SX, ("cpr: stop other cpus\n"))
i_cpr_stop_other_cpus();
PMD(PMD_SX, ("cpr: spl6\n"))
(void) spl6();
/*
* try and reset leaf devices. reset_leaves() should only
* be called when there are no other threads that could be
* accessing devices
*/
PMD(PMD_SX, ("cpr: reset leaves\n"))
reset_leaves();
/*
* If i_cpr_power_down() succeeds, it'll not return
*
* Drives with write-cache enabled need to flush
* their cache.
*/
if (fcn != AD_CPR_TESTHALT) {
PMD(PMD_SX, ("cpr: power down\n"))
(void) i_cpr_power_down(cpr_sleeptype);
}
ASSERT(cpr_sleeptype == CPR_TODISK);
/* currently CPR_TODISK comes back via a boot path */
CPR_DEBUG(CPR_DEBUG1, "(Done. Please Switch Off)\n");
halt(NULL);
/* NOTREACHED */
#endif
}
PMD(PMD_SX, ("cpr: cpr done\n"))
cpr_done();
return (rc);
}
/*
* return statefile offset in DEV_BSIZE units
*/
int
cpr_statefile_offset(void)
{
return (cpr_statefile_is_spec() ? btod(CPR_SPEC_OFFSET) : 0);
}
