void ushell_cmd_perform_extaccess( bool b_sens_write, Fs_file_segment seg )
{
uint16_t u16_trans;
uint32_t u32_tmp, u32_time;
uint8_t u8_nb_trans_usb=0;
fat_cache_flush();
fat_cache_reset();
u32_time = Get_sys_count();
u16_trans=0;
while( seg.u16_size!=0 )
{
if( 0 == (seg.u32_addr % SIZE_OF_EXT_BUFFER) )
{
u8_nb_trans_usb = SIZE_OF_EXT_BUFFER;
}else{
u8_nb_trans_usb = SIZE_OF_EXT_BUFFER - (seg.u32_addr % SIZE_OF_EXT_BUFFER); // to align access with usual memory mapping
}
if (u8_nb_trans_usb > seg.u16_size)
u8_nb_trans_usb = seg.u16_size;
if( b_sens_write )
{
if( CTRL_GOOD != host_write_10_extram( seg.u32_addr , u8_ext_buffer, u8_nb_trans_usb )) {
printf( "Transfer error\r\n");
return;
}
}else{
if( CTRL_GOOD != host_read_10_extram( seg.u32_addr , u8_ext_buffer, u8_nb_trans_usb )) {
printf( "Transfer error\r\n");
return;
}
}
seg.u16_size -= u8_nb_trans_usb;
u16_trans += u8_nb_trans_usb;
seg.u32_addr += u8_nb_trans_usb;
if( 8000000 < cpu_cy_2_us(Get_sys_count()-u32_time, g_u32_ushell_pba_hz) )
{
// Stop access after 8s
break;
}
}
u32_time = cpu_cy_2_us(Get_sys_count()-u32_time, g_u32_ushell_pba_hz);
u32_tmp = ((uint32_t)u16_trans*(1000000/2))/u32_time;
if( b_sens_write )
printf( "Transfer rate - WRITE %4luKB/s\r\n", u32_tmp);
else
printf( "Transfer rate - READ %4luKB/s\r\n", u32_tmp );
}
void ushell_cmd_perform_access( bool b_sens_write, Fs_file_segment seg )
{
uint16_t u16_trans;
uint32_t u32_tmp, u32_time;
fat_cache_flush();
fat_cache_reset();
u32_time = Get_sys_count();
for( u16_trans=0; u16_trans<seg.u16_size; u16_trans++ )
{
if( b_sens_write )
{
if( CTRL_GOOD != ram_2_memory( seg.u8_lun , seg.u32_addr , fs_g_sector )) {
printf( "Transfer error\r\n");
return;
}
}else{
if( CTRL_GOOD != memory_2_ram( seg.u8_lun , seg.u32_addr , fs_g_sector )) {
printf( "Transfer error\r\n");
return;
}
}
seg.u32_addr++;
if( 8000000 < cpu_cy_2_us(Get_sys_count()-u32_time, g_u32_ushell_pba_hz) )
{
// Stop access after 8s
break;
}
}
u32_time = cpu_cy_2_us(Get_sys_count()-u32_time, g_u32_ushell_pba_hz);
u32_tmp = ((uint32_t)u16_trans*(1000000/2))/u32_time;
if( b_sens_write )
printf( "Transfer rate - WRITE %4luKB/s\r\n", u32_tmp );
else
printf( "Transfer rate - READ %4luKB/s\r\n", u32_tmp );
}
static void record_events(void)
{
uint16_t i=0;
while(1) {
while (!main_events) {
sleepmgr_enter_sleep(); \
}
if (i < NB_EVENTS) {
// Register events
irqflags_t flags = cpu_irq_save();
list_event[i].event = main_events;
list_event[i++].timestamp =
cpu_cy_2_us(Get_system_register(AVR32_COUNT),sysclk_get_cpu_hz());
main_events=0;
cpu_irq_restore(flags);
}
}
}
/** \brief This function returns the current timestamp counter value.
*
* The timestamp facility is implemented in terms of the XMEGA or UC3
* timer and clock function APIs.
*
* \return The current counter value (microseconds).
*/
uint32_t sensor_timestamp(void)
{
uint32_t tsc = 0;
#if UC3
/** \todo
*
* Implement this interface in terms of XMEGA and UC3 timer/counter (TC)
* facilities exposed through ASF drivers. A free running counter with
* microsecond resolution is desirable. Ideally, the counter value
* should be updated without using interrupts and attached to a clock
*that
* will be available while the MCU is in lower power modes.
*/
tsc = cpu_cy_2_us(Get_system_register(AVR32_COUNT),
sysclk_get_cpu_hz());
#endif
return tsc;
}
void ushell_cmd_perform_transfer( Fs_file_segment seg_src, Fs_file_segment seg_dest )
{
uint8_t id_trans_memtomem;
Ctrl_status status_stream;
uint16_t u16_i, u16_trans_max;
uint32_t u32_tmp, u32_time;
u16_trans_max = ( seg_src.u16_size < seg_dest.u16_size )? seg_src.u16_size : seg_dest.u16_size;
for( u16_i=2; u16_i<=u16_trans_max; u16_i*=10 )
{
u32_time = Get_sys_count();
id_trans_memtomem = stream_mem_to_mem( seg_src.u8_lun , seg_src.u32_addr , seg_dest.u8_lun , seg_dest.u32_addr , u16_i );
if( ID_STREAM_ERR == id_trans_memtomem )
{
printf( "Transfer error\r\n");
return;
}
while(1)
{
status_stream = stream_state( id_trans_memtomem );
if( CTRL_BUSY == status_stream ) continue;
if( CTRL_GOOD == status_stream ) break;
if( CTRL_FAIL == status_stream ) {
printf( "Transfer error\r\n");
return;
}
}
u32_time = cpu_cy_2_us(Get_sys_count()-u32_time, g_u32_ushell_pba_hz );
u32_tmp = ((uint32_t)u16_i*(1000000/2))/u32_time;
printf( "Transfer rate %4luKB/s - stream size %4iKB\r\n", u32_tmp, u16_i/2 );
if( (8000000) < u32_time )
{
// The test time must be inferior at 8s
break;
}
}
}
/*! \brief Main function.
*/
int main(void)
{
bool valid_block_found[NF_N_DEVICES];
U32 u32_nf_ids, i_dev, i_block;
U8 maker_id, device_id, byte3;
U32 i, time_s, time_e;
U8 data;
// start init
sysclk_init();
// Enable clock for require module
sysclk_enable_hsb_module(SYSCLK_EBI);
sysclk_enable_pbb_module(SYSCLK_SMC_REGS);
sysclk_enable_pbb_module(SYSCLK_HMATRIX);
// Initialize the board.
// The board-specific conf_board.h file contains the configuration of the board
// initialization.
board_init();
init_stdio();
#ifdef NF_ADDON // addon nandflash board for EVK1104 (not mounted by default)
// Unselect NF on board
gpio_set_gpio_pin(AVR32_PIN_PX53);
gpio_set_gpio_pin(AVR32_PIN_PX52);
#endif
nf_init(sysclk_get_cpu_hz());
nf_unprotect();
printf("\x0C");
printf("Nand Flash example.\r\n===================\r\n\r\n");
// - Simple test of the NF communication through the SMC.
// - Find all bad blocks.
// - Find a valid block for the remaining tests.
nf_reset_nands(NF_N_DEVICES);
printf("\tDetecting Nand Flash device(s).\r\n");
for( i_dev=0 ; i_dev<NF_N_DEVICES ; i_dev++ )
{
// Performs some init here...
valid_block_found[i_dev] = false;
// Test Maker and Device ids
u32_nf_ids = nf_read_id( NF_READ_ID_CMD, i_dev );
maker_id = MSB0(u32_nf_ids);
device_id = MSB1(u32_nf_ids);
byte3 = MSB3(u32_nf_ids);
printf("\t\tNF %ld: [Maker=0x%02x] [Device=0x%02x] [byte3=0x%02x]\r\n", i_dev, maker_id, device_id, byte3);
if( maker_id==M_ID_MICRON )
{
printf("\t\t Micron chip");
if( (device_id==0xDA) && (byte3==0x15) )
printf("- MT29F2G08AACWP device\r\n");
else if( (device_id==0xDA) && (byte3==0x95) )
printf("- MT29F2G08AADWP device\r\n");
else
{
printf("- *** Error: unexpected chip detected. Please check the board settings and hardware.\r\n");
return -1;
}
}
else
{
printf("\t\t *** Error: unexpected chip detected. Please check the board settings and hardware.\r\n");
return -1;
}
}
printf("\r\n\tTesting bad blocks.\r\n");
for( i_dev=0 ; i_dev<NF_N_DEVICES ; i_dev++ )
{
printf("\t\tNF %ld:\r\n", i_dev);
nf_select(i_dev);
for( i_block=0 ; i_block<G_N_BLOCKS ; i_block++ )
{
nf_open_page_read( nf_block_2_page(i_block), NF_SPARE_POS + G_OFST_BLK_STATUS );
if( (nf_rd_data()!=0xFF) )
{ // The block is bad.
printf("\t\t\tBlock %ld (0x%lx) is bad.\r\n", i_block, i_block);
}
else
{
if( !valid_block_found[i_dev] )
{
valid_block_found[i_dev]= true;
valid_block_addr[i_dev] = i_block;
printf("\t\t\tFirst valid block is at address %ld (0x%lx).\r\n", i_block, i_block);
}
}
}
}
for( i_dev=0 ; i_dev<NF_N_DEVICES ; i_dev++ )
if( !valid_block_found[i_dev] )
{
printf("Error %d\r\n", __LINE__);
return 0;
}
// - Ensure good NF behaviour through simple commands.
// Erase, Program, Read
// - Measures NF timings.
printf("\r\n\tMeasuring NF timings.\r\n");
for( i_dev=0 ; i_dev<NF_N_DEVICES ; i_dev++ )
{
printf("\t\tNF %ld:\r\n", i_dev);
nf_select(i_dev);
nf_erase_block( nf_block_2_page(valid_block_addr[0]), false);
time_s = Get_sys_count();
nf_wait_busy();
time_e = Get_sys_count();
// Verify that the block is erased.
nf_open_page_read( nf_block_2_page(valid_block_addr[0]), 0);
for( i= 0; i<2048 ; i++ )
{
data = nf_rd_data();
if( data!=0xFF )
{
printf("\tError: offset %d is not erased (read %d).\r\n", (U8)i, data);
return 0;
}
}
printf("\t\t\tTime to erase a page:%ld cy (%ld us)\r\n", time_e-time_s, cpu_cy_2_us(time_e-time_s, sysclk_get_cpu_hz()));
nf_open_page_write( nf_block_2_page(valid_block_addr[0]), 0);
for( i=0 ; i<2048 ; i++ )
nf_wr_data(i%256);
nf_wr_cmd(NF_PAGE_PROGRAM_CMD);
time_s = Get_sys_count();
nf_wait_busy();
time_e = Get_sys_count();
printf("\t\t\tTime to program a page:%ld cy (%ld us)\r\n", time_e-time_s, cpu_cy_2_us(time_e-time_s, sysclk_get_cpu_hz()));
time_s = Get_sys_count();
nf_open_page_read( nf_block_2_page(valid_block_addr[0]), 0);
time_e = Get_sys_count();
printf("\t\t\tTime to access to a page:%ld cy (%ld us)\r\n", time_e-time_s, cpu_cy_2_us(time_e-time_s, sysclk_get_cpu_hz()));
for( i= 0; i<2048 ; i++ )
{
data = nf_rd_data();
if( data!= i%256)
{
printf("\tError: expect %d, read %d\r\n", (U8)i, data);
return 0;
}
}
}
printf("Example DONE\r\n");
return 0;
}
