int main(void)
{
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/* MCU Configuration----------------------------------------------------------*/
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
HAL_Init();
/* Configure the system clock */
SystemClock_Config();
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_USART2_UART_Init();
/* USER CODE BEGIN 2 */
dc_main();
/* USER CODE END 2 */
/* Infinite loop */
/* USER CODE BEGIN WHILE */
while (1)
{
/* USER CODE END WHILE */
/* USER CODE BEGIN 3 */
}
/* USER CODE END 3 */
}
int
main( int argc, char **argv )
{
dc_main_init = main_init;
dc_main_config = main_config;
dc_main_shutdown_fast = main_shutdown_fast;
dc_main_shutdown_graceful = main_shutdown_graceful;
return dc_main( argc, argv );
}
int
main( int argc, char **argv )
{
set_mySubSystem( "C_GAHP_WORKER_THREAD", SUBSYSTEM_TYPE_GAHP );
dc_main_init = main_init;
dc_main_config = main_config;
dc_main_shutdown_fast = main_shutdown_fast;
dc_main_shutdown_graceful = main_shutdown_graceful;
return dc_main( argc, argv );
}
int
main( int argc, char **argv )
{
set_mySubSystem("SHARED_PORT", SUBSYSTEM_TYPE_SHARED_PORT ); // used by Daemon Core
dc_main_init = main_init;
dc_main_config = main_config;
dc_main_shutdown_fast = main_shutdown_fast;
dc_main_shutdown_graceful = main_shutdown_graceful;
return dc_main( argc, argv );
}
int
main( int argc, char **argv )
{
set_mySubSystem( "SCHEDD", SUBSYSTEM_TYPE_SCHEDD );
dc_main_init = main_init;
dc_main_config = main_config;
dc_main_shutdown_fast = main_shutdown_fast;
dc_main_shutdown_graceful = main_shutdown_graceful;
return dc_main( argc, argv );
}
// on ! Windows, this is just called by main,
// on Windows, WinMain builds an argc,argv,
// does some Windows specific initialization, then calls this
//
// TODO: make kbdd a simple program and not daemon core, then
// we can ditch this.
//
int
daemon_main( int argc, char **argv )
{
set_mySubSystem( "KBDD", SUBSYSTEM_TYPE_DAEMON );
dc_main_init = main_init;
dc_main_config = main_config;
dc_main_shutdown_fast = main_shutdown_fast;
dc_main_shutdown_graceful = main_shutdown_graceful;
return dc_main( argc, argv );
}
int
main( int argc, char **argv )
{
set_mySubSystem( "Replication", SUBSYSTEM_TYPE_DAEMON );// used by Daemon Core
dc_main_init = main_init;
dc_main_config = main_config;
dc_main_shutdown_fast = main_shutdown_fast;
dc_main_shutdown_graceful = main_shutdown_graceful;
return dc_main( argc, argv );
}
int
main( int argc, char **argv )
{
set_mySubSystem( NULL, SUBSYSTEM_TYPE_STARTER );
dc_main_init = main_init;
dc_main_config = main_config;
dc_main_shutdown_fast = main_shutdown_fast;
dc_main_shutdown_graceful = main_shutdown_graceful;
dc_main_pre_dc_init = main_pre_dc_init;
return dc_main( argc, argv );
}
int
main( int argc, char **argv )
{
set_mySubSystem("FT_GAHP", SUBSYSTEM_TYPE_GAHP);
dc_main_init = main_init;
dc_main_config = main_config;
dc_main_shutdown_fast = main_shutdown_fast;
dc_main_shutdown_graceful = main_shutdown_graceful;
dc_main_pre_command_sock_init = main_pre_command_sock_init;
return dc_main( argc, argv );
}
int
main( int argc, char **argv )
{
if( argc == 2 && strncasecmp(argv[1],"-cl",3) == MATCH ) {
printClassAd();
exit(0);
}
set_mySubSystem( "SHADOW", SUBSYSTEM_TYPE_SHADOW );
dc_main_init = main_init;
dc_main_config = main_config;
dc_main_shutdown_fast = main_shutdown_fast;
dc_main_shutdown_graceful = main_shutdown_graceful;
return dc_main( argc, argv );
}
int
main( int argc, char **argv )
{
// parse args to see if we have been asked to run as a service.
// services are started without a console, so if we have one
// we can't possibly run as a service.
//
#ifdef WIN32
bool has_console = main_has_console();
bool is_daemon = dc_args_is_background(argc, argv);
#endif
set_mySubSystem( "MASTER", SUBSYSTEM_TYPE_MASTER );
SharedPortEndpoint::InitializeDaemonSocketDir();
dc_main_init = main_init;
dc_main_config = main_config;
dc_main_shutdown_fast = main_shutdown_fast;
dc_main_shutdown_graceful = main_shutdown_normal;
dc_main_pre_command_sock_init = main_pre_command_sock_init;
#ifdef WIN32
// if we have been asked to start as a daemon, on Windows
// first try and start as a service, if that doesn't work try
// to start as a background process. Note that we don't return
// from the call to start_as_service() if the service successfully
// started - just like dc_main().
//
NT_ServiceFlag = FALSE;
if (is_daemon) {
NT_ServiceFlag = TRUE;
DWORD err = start_as_service();
if (err == 0x666) {
// 0x666 is a special error code that tells us
// the Service Control Manager didn't create this process
// so we should go ahead run as normal background 'daemon'
NT_ServiceFlag = FALSE;
} else {
return (int)err;
}
}
#endif
return dc_main( argc, argv );
}
int main(int argc, char *argv[])
{
int i;
int sensor_on = 0;
int ldw = 0;
int ret = 0;
int initial_err = 0;
int sensor60fps = 0;
gpCVR_VStream_Cfg cfg;
if((strcmp(SYSCONFIG_PLATFORM, "gplus.cvr_turnkey_demo0") == 0 )|| ( strcmp(SYSCONFIG_PLATFORM, "gplus.cvr_turnkey_demo2") == 0 ))
{
g_flip_on = 0;
g_flip_off = 1;
}
else
{
g_flip_on = 1;
g_flip_off = 0;
}
global_flip = g_flip_off;
memset(&cfg, 0, sizeof(gpCVR_VStream_Cfg));
cfg.sensor_calibrate = &ar0330_cdsp_calibration;
cfg.cdsp_user_preference = &cdsp_user_preference;
memset(cam_working_path, 0, 256);
if (strcmp(argv[1], "-dv") == 0)
mode = DV_MODE;
else if (strcmp(argv[1], "-dc") == 0)
mode = DC_MODE;
else
return -1;
dv_parse_command(argc, argv);
dc_parse_command(argc, argv);
signal(SIGUSR1,get_signal_user1);
signal(SIGUSR2,get_signal_user2);
signal(SIGTERM,get_signal_term);
ldw = global_ldw;
update_flag(&cfg.flag, CFG_LDW, ldw);
sensor60fps = global_60fps;
sensor_on = 0;
RegisterSigint();
while(!powerOff)
{
//unsigned int msgId;
//void* msgPara = NULL;
if (mode == DV_MODE)
{
cfg.mode = MODE_H264;
update_flag(&cfg.flag, CFG_LDW, global_ldw);
cfg.width = cfg.height = cfg.fps = 0;
if (global_60fps)
{
cfg.width = 1280;
cfg.height = 720;
cfg.fps = 60;
}
if (!sensor_on)
{
ret = gp_IPC_VStream_Open(&cfg);
}
else if (global_ldw != ldw || global_60fps != sensor60fps)
{
gp_IPC_VStream_Close();
ret = gp_IPC_VStream_Open(&cfg);
}
if (ret < 0)
{
initial_err = 1;
powerOff = 1;
}
sensor_on = 1;
gp_IPC_VStream_Start();
printf("Start DV Mode\n");
ret = dv_main(argc, argv);
if (ret < 0)
{
powerOff = 1;
continue;
}
mode = WAIT_MODE;
ldw = global_ldw;
sensor60fps = global_60fps;
}
else if (mode == DC_MODE)
{
cfg.mode = MODE_JPG;
update_flag(&cfg.flag, CFG_LDW, 0);
cfg.width = cfg.height = cfg.fps = 0;
if (!sensor_on)
{
ret = gp_IPC_VStream_Open(&cfg);
}
else if (ldw || sensor60fps)
{
gp_IPC_VStream_Close();
ret = gp_IPC_VStream_Open(&cfg);
}
if (ret < 0)
{
initial_err = 1;
powerOff = 1;
continue;
}
ldw = 0;
sensor60fps = 0;
sensor_on = 1;
gp_IPC_VStream_Start();
printf("Start DC Mode\n");
ret = dc_main(argc, argv);
if (ret < 0)
{
powerOff = 1;
continue;
}
mode = WAIT_MODE;
}
else if (mode == IDLE_MODE)
{
if (sensor_on)
{
printf("Sensor Stop\n");
//gp_IPC_VStream_Stop();
gp_IPC_VStream_Close();
sensor_on = 0;
}
mode = WAIT_MODE;
}
g_bQuit = 0;
usleep(5000);
}
if (initial_err)
{
printf("[camcorder] Initialize Error\n");
dvr_pipe_init();
dvr_pipemsg_send(CMD_READY_KEY, 0, NULL);
dvr_pipe_close();
}
else
{
gp_IPC_VStream_Close();
}
printf("[camcorder] program exit\n");
return ret;
}
