pulsesequence()
{
/* DECLARE VARIABLES */
char f1180[MAXSTR],C13refoc[MAXSTR], C13filter[MAXSTR];
int t1_counter;
double
tau1, /* t1/2 */
JNH = getval("JNH"),
tauNH = 1/(4*JNH), /* delay for 1H-15N INEPT 1/4JNH */
tauNH1 = getval("tauNH1"), /* 1/2JNH */
tauNH2 = getval("tauNH2"), /* 1/2JNH */
tauCH1 = getval("tauCH1"), /* 1/2JCH */
tauCH2 = getval("tauCH2"), /* 1/2JCH tauCH2=2tauNH1-2tauCH1 */
fact = getval("fact"), /* scale factor for spin-echo */
pwN = getval("pwN"),
pwNlvl = getval("pwNlvl"),
pwClvl = getval("pwClvl"), /* coarse power for C13 pulse */
pwC = getval("pwC"), /* C13 90 degree pulse length at pwClvl */
compC = getval("compC"),
rf0, /* maximum fine power when using pwC pulses */
rfst, /* fine power for the stCall pulse */
mix = getval("mix"), /* mixing time for H2O - NH */
dofCHn = getval("dofCHn"),
gt1 = getval("gt1"),
gt2 = getval("gt2"),
gt3 = getval("gt3"),
gt4 = getval("gt4"),
gt5 = getval("gt5"),
gstab=getval("gstab"),
gzlvl1 = getval("gzlvl1"),
gzlvl2 = getval("gzlvl2"),
gzlvl3 = getval("gzlvl3"),
gzlvl4 = getval("gzlvl4"),
gzlvl5 = getval("gzlvl5"),
gzlvld1 = getval("gzlvld1"), /* remove radiation damping in spin-echo filter */
gzlvld2 = getval("gzlvld2"); /* remove radiation damping in mixing time */
/* LOAD VARIABLES */
getstr("f1180",f1180);
getstr("C13refoc",C13refoc);
getstr("C13filter",C13filter);
/* maximum fine power for pwC pulses (and initialize rfst) */
rf0 = 4095.0; rfst=0.0;
/* 180 degree adiabatic C13 pulse from 0 to 200 ppm */
if (C13refoc[A]=='y')
{rfst = (compC*4095.0*pwC*4000.0*sqrt((30.0*sfrq/600.0+7.0)/0.35));
rfst = (int) (rfst + 0.5);
if ( 1.0/(4000.0*sqrt((30.0*sfrq/600.0+7.0)/0.35)) < pwC )
{ text_error( " Not enough C13 RF. pwC must be %f usec or less.\n",
(1.0e6/(4000.0*sqrt((30.0*sfrq/600.0+7.0)/0.35))) ); psg_abort(1); }}
initval(3.0,v2);
initval(1.0,v3);
/* check validity of parameter range */
if((dm[A] == 'y' || dm[B] == 'y' ))
{
printf("incorrect Dec1 decoupler flags! ");
psg_abort(1);
}
if((dm2[A] == 'y' || dm2[B] == 'y' || dm2[C] == 'n'))
{
printf("incorrect Dec2 decoupler flags! dm2 Should be 'nny' ");
psg_abort(1);
}
if( dpwr > 50 )
{
printf("don't fry the probe, dpwr too large! ");
psg_abort(1);
}
if( dpwr2 > 50 )
{
printf("don't fry the probe, dpwr2 too large! ");
psg_abort(1);
}
if((gt1 > 5.0e-3) || (gt2 > 5.0e-3) || (gt3 > 5.0e-3))
{
printf("gti must be less than 5 ms \n");
psg_abort(1);
}
if((gt4 > 5.0e-3) || (gt5 > 5.0e-3))
{
printf("gti must be less than 5 ms \n");
psg_abort(1);
}
if(gzlvld1>200 || gzlvld2>200 )
{
printf("gzlvldi should not be larger than 200 DAC \n");
psg_abort(1);
}
/* LOAD VARIABLES */
settable(t1, 4, phi1);
settable(t2, 2, phi2);
settable(t3, 4, phi3);
settable(t4, 8, phi4);
settable(t5, 2, phi5);
settable(t6, 4, phi6);
settable(t14,8, rec);
/* Phase incrementation for hypercomplex data */
if ( phase1 == 2 ) /* Hypercomplex in t1 */
{
tsadd(t2,1,4);
}
/* calculate modification to phases based on current t1 values
to achieve States-TPPI acquisition */
if(ix == 1)
{
d2_init = d2;
}
t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5);
if(t1_counter %2)
{
tsadd(t2,2,4);
tsadd(t14,2,4);
}
/* set up so that get (-90,180) phase corrects in F1 if f1180 flag is y */
tau1=d2;
if( (f1180[A] == 'y') && (ni >1.0) ) tau1 += (1.0/(2.0*sw1));
tau1 = tau1/2.0 -pw -2*pwN/PI;
if (tau1 < 0.0) tau1=0.0;
/* BEGIN ACTUAL PULSE SEQUENCE */
status(A);
obspower(tpwr); /* Set power for pulses */
dec2power(pwNlvl); /* Set decoupler2 power to pwNlvl */
decpower(pwClvl);
decpwrf(rf0);
obsoffset(tof);
decoffset(dofCHn);
delay(d1);
status(B);
rcvroff();
txphase(t1);
delay(9.0e-5);
/* spin-echo filter and 15N/13C double filters */
rgpulse(pw,t1,0.0,0.0);
if(C13filter[A]=='y')
{
decphase(t5);
zgradpulse(gzlvl5,gt5);
delay(tauCH1-gt5);
decrgpulse(pwC,t5,0.0,0.0);
txphase(t3); dec2phase(t5);
delay(tauNH1-tauCH1-pwN*0.5);
sim3pulse(2.0*pw,2*pwC,pwN,t3,zero,t5,0.0,0.0);
decphase(t6);
delay(tauCH2+tauCH1-tauNH1-pwN*0.5);
decrgpulse(pwC,t6,0.0,0.0);
delay(tauNH1+tauNH2-tauCH1-tauCH2-gt5-gstab);
zgradpulse(gzlvl5,gt5);
delay(gstab);
}
else
{
if (gzlvld1>0.0)
{
txphase(t3); dec2phase(t5);
delay(2.0e-6);
zgradpulse(gzlvld1,0.5*fact*tauNH1-pwN*0.25-11.0e-6);
delay(2.0e-5);
zgradpulse(-gzlvld1,0.5*fact*tauNH1-pwN*0.25-11.0e-6);
delay(2.0e-6);
sim3pulse(2.0*pw,0.0e-6,pwN,t3,zero,t5,0.0,0.0);
delay(2.0e-6);
zgradpulse(gzlvld1,0.5*fact*tauNH2-pwN*0.25-11.0e-6);
delay(2.0e-5);
zgradpulse(-gzlvld1,0.5*fact*tauNH2-pwN*0.25-11.0e-6);
delay(2.0e-6);
}
else
{
txphase(t3); dec2phase(t5);
delay(fact*tauNH1-pwN*0.5);
sim3pulse(2.0*pw,0.0e-6,pwN,t3,zero,t5,0.0,0.0);
delay(2.0e-6);
delay(0.5*fact*tauNH2-pwN*0.25-3.0e-6);
delay(2.0e-6);
delay(0.5*fact*tauNH2-pwN*0.25-3.0e-6);
delay(2.0e-6);
}
}
txphase(zero); dec2phase(t6);
sim3pulse(pw,0.0e-6,pwN,zero,zero,t6,0.0,0.0);
decoffset(dof);
decpwrf(rfst);
/* mixing time */
zgradpulse(gzlvl4,gt4);
delay(gstab);
if(mix - 4.0e-6 - 4.0*GRADIENT_DELAY - gt4> 0.0)
{
if (gzlvld2>0.0)
{
zgradpulse(gzlvld2,mix-gt4-gstab);
}
else
delay(mix-gt4-gstab);
}
/* H1-N15 INEPT */
rgpulse(pw, zero, 0.0, 0.0);
zgradpulse(gzlvl1,gt1);
dec2phase(zero); decphase(zero);
delay(tauNH-gt1); /* delay=1/4J(XH) */
sim3pulse(2*pw,0.0,2*pwN,zero,zero,zero,rof1,rof1);
zgradpulse(gzlvl1,gt1);
txphase(one);
dec2phase(t2);
delay(tauNH-gt1 ); /* delay=1/4J(XH) */
rgpulse(pw, one, rof1, rof1);
zgradpulse(gzlvl2,gt2);
delay(gstab);
dec2rgpulse(pwN, t2, 0.0, 0.0);
txphase(zero); dec2phase(t4);
/* t1 evolution period */
if ( (C13refoc[A]=='y') && (tau1 > 0.5e-3 + WFG2_START_DELAY) )
{delay(tau1 - 0.5e-3 - WFG2_START_DELAY); /* WFG2_START_DELAY */
simshaped_pulse("", "stC200", 2.0*pw, 1.0e-3, zero, zero, 0.0, 0.0);
delay(tau1 - 0.5e-3);}
else
{delay(tau1);
rgpulse(2.0*pw, zero, 0.0, 0.0);
delay(tau1);}
dec2rgpulse(pwN, t4, 0.0, 0.0);
txphase(t1);
zgradpulse(gzlvl2,gt2);
delay(gstab);
rgpulse(pw, t1, rof1, rof1);
dec2phase(zero);
zgradpulse(gzlvl3,gt3);
txphase(v2);
delay(gstab);
delay(tauNH-gt3-gstab-pw*2.385-6.0*rof1 -d3*2.5);
rgpulse(pw*0.231,v2,rof1,rof1);
delay(d3);
rgpulse(pw*0.692,v2,rof1,rof1);
delay(d3);
rgpulse(pw*1.462,v2,rof1,rof1);
delay(d3/2-pwN);
dec2rgpulse(2*pwN, zero, rof1, rof1);
delay(d3/2-pwN);
rgpulse(pw*1.462,v3,rof1,rof1);
delay(d3);
rgpulse(pw*0.692,v3,rof1,rof1);
delay(d3);
rgpulse(pw*0.231,v3,rof1,rof1);
delay(tauNH-gt3-gstab-pw*2.385-6.0*rof1 -d3*2.5);
dec2power(dpwr2);
zgradpulse(gzlvl3,gt3);
delay(gstab);
/* acquire data */
status(C);
setreceiver(t14);
}
pulsesequence()
{
char
f1180[MAXSTR],
f2180[MAXSTR],
mag_flg[MAXSTR]; /* y for magic angle, n for z-gradient only */
int
icosel,
t1_counter,
t2_counter;
double
ni2,
ratio, /* used to adjust t1 semi-constant time increment */
tau1,
tau2,
taua, /* ~ 1/4JCH = 1.5 ms - 1.7 ms] */
taub, /* ~ 3.3 ms */
bigTC, /* ~ 8 ms */
bigTCO, /* ~ 6 ms */
bigTN, /* ~ 12 ms */
tauc, /* ~ 5.4 ms */
taud, /* ~ 2.3 ms */
gstab, /* ~0.2 ms, gradient recovery time */
pwClvl, /* High power level for carbon on channel 2 */
pwC, /* C13 90 degree pulse length at pwClvl */
compH, /* Compression factor for H1 on channel 1 */
compC, /* Compression factor for C13 on channel 2 */
pwNlvl, /* Power level for Nitrogen on channel 3 */
pwN, /* N15 90 degree pulse lenght at pwNlvl */
maxpwCN,
bw, ofs, ppm, /* bandwidth, offset, ppm - temporary Pbox parameters */
pwCa90, /*90 "offC13" pulse at Ca(56ppm) xmtr at CO(174ppm) */
pwCa180, /*180 "offC17" pulse at Ca(56ppm) xmtr at CO(174ppm) */
pwCO90, /* 90 "offC6" pulse at CO(174ppm) xmtr at CO(174ppm)*/
pwCO180, /* 180 "offC8" pulse at CO(174ppm) xmtr at CO(174ppm)*/
pwCab180, /* 180 "offC27" pulse at Cab(46ppm) xmtr at CO(174ppm)*/
tpwrHd, /* Power level for proton decoupling on channel 1 */
pwHd, /* H1 90 degree pulse lenth at tpwrHd. */
waltzB1 = getval("waltzB1"), /* waltz16 field strength (in Hz) */
phi_CO, /* phase correction for Bloch-Siegert effect on CO */
phi_Ca, /* phase correction for Bloch-Siegert effect on Ca */
gt1,
gt2,
gt3,
gt4,
gt5,
gt6,
gt7,
gt0,
gzlvl1,
gzlvl2,
gzlvl3,
gzlvl4,
gzlvl5,
gzlvl6, /* N15 selection gradient level in DAC units */
gzlvl7,
gzlvl0, /* H1 gradient level in DAC units */
gzcal, /* gradient calibration (gcal) */
dfCa180,
dfCab180,
dfC90,
dfCa90,
dfCO180;
/* LOAD VARIABLES */
getstr("f1180",f1180);
getstr("f2180",f2180);
getstr("mag_flg", mag_flg);
gzcal = getval("gzcal");
ni2 = getval("ni2");
taua = getval("taua");
taub = getval("taub");
tauc = getval("tauc");
bigTC = getval("bigTC");
bigTCO = getval("bigTCO");
bigTN = getval("bigTN");
taud = getval("taud");
gstab = getval("gstab");
pwClvl = getval("pwClvl");
pwC = getval("pwC");
compH = getval("compH");
compC = getval("compC");
pwNlvl = getval("pwNlvl");
pwN = getval("pwN");
phi_CO = getval("phi_CO");
phi_Ca = getval("phi_Ca");
gt1 = getval("gt1");
gt2 = getval("gt2");
gt3 = getval("gt3");
gt4 = getval("gt4");
gt5 = getval("gt5");
gt6 = getval("gt6");
gt7 = getval("gt7");
gt0 = getval("gt0");
gzlvl1 = getval("gzlvl1");
gzlvl2 = getval("gzlvl2");
gzlvl3 = getval("gzlvl3");
gzlvl4 = getval("gzlvl4");
gzlvl5 = getval("gzlvl5");
gzlvl6 = getval("gzlvl6");
gzlvl7 = getval("gzlvl7");
gzlvl0 = getval("gzlvl0");
setautocal(); /* activate auto-calibration flags */
if (autocal[0] == 'n')
{
pwCa90 = getval("pwCa90");
pwCa180 = getval("pwCa180");
pwCab180 = getval("pwCab180");
pwCO90 = getval("pwCO90");
pwCO180 = getval("pwCO180");
dfCa180 = (compC*4095.0*pwC*2.0*1.69)/pwCa180; /*power for "offC17" pulse*/
dfCab180 = (compC*4095.0*pwC*2.0*1.69)/pwCab180; /*power for "offC27" pulse*/
dfC90 = (compC*4095.0*pwC*1.69)/pwCO90; /*power for "offC6" pulse */
dfCa90 = (compC*4095.0*pwC)/pwCa90; /*power for "offC13" pulse*/
dfCO180 = (compC*4095.0*pwC*2.0*1.65)/pwCO180; /*power for "offC8" pulse */
dfCa90 = (int) (dfCa90 + 0.5);
dfCa180 = (int) (dfCa180 + 0.5);
dfC90 = (int) (dfC90 + 0.5);
dfCO180 = (int) (dfCO180 + 0.5);
dfCab180 = (int) (dfCab180 +0.5);
/* power level and pulse time for WALTZ 1H decoupling */
pwHd = 1/(4.0 * waltzB1) ;
tpwrHd = tpwr - 20.0*log10(pwHd/(compH*pw));
tpwrHd = (int) (tpwrHd + 0.5);
}
else
{
if(FIRST_FID) /* call Pbox */
{
ppm = getval("dfrq"); bw = 118.0*ppm; ofs = -118.0*ppm;
offC6 = pbox_make("offC6", "sinc90n", bw, 0.0, compC*pwC, pwClvl);
offC8 = pbox_make("offC8", "sinc180n", bw, 0.0, compC*pwC, pwClvl);
offC17 = pbox_make("offC17", "sinc180n", bw, ofs, compC*pwC, pwClvl);
bw = 128.0*ppm;
offC13 = pbox_make("offC13", "square90n", bw, ofs, compC*pwC, pwClvl);
ofs = -128.0*ppm;
offC27 = pbox_make("offC27", "sinc180n", bw, ofs, compC*pwC, pwClvl);
bw = 2.8*7500.0;
wz16 = pbox_Dcal("WALTZ16", 2.8*waltzB1, 0.0, compH*pw, tpwr);
ofs_check(H1ofs, C13ofs, N15ofs, H2ofs);
}
dfC90 = offC6.pwrf; pwCO90 = offC6.pw;
dfCO180 = offC8.pwrf; pwCO180 = offC8.pw;
dfCa90 = offC13.pwrf; pwCa90 = offC13.pw;
dfCa180 = offC17.pwrf; pwCa180 = offC17.pw;
dfCab180 = offC27.pwrf; pwCab180 = offC27.pw;
tpwrHd = wz16.pwr; pwHd = 1.0/wz16.dmf;
}
maxpwCN = 2.0*pwN;
if (pwCab180 > pwN) maxpwCN = pwCab180;
/* LOAD PHASE TABLE */
settable(t1,4,phi1);
settable(t2,2,phi2);
settable(t3,8,phi3);
settable(t4,16,phi4);
settable(t5,1,phi5);
settable(t16,8,rec);
/* CHECK VALIDITY OF PARAMETER RANGES */
if(ni > 64)
{
printf("ni is out of range. Should be: 14 to 64 ! \n");
psg_abort(1);
}
/*
if(ni/sw1 > 2.0*(bigTCO))
{
printf("ni is too big, should be < %f\n", sw1*2.0*(bigTCO));
psg_abort(1);
}
*/
if(ni2/sw2 > 2.0*(bigTN - pwCO180))
{
printf("ni2 is too big, should be < %f\n",2.0*sw2*(bigTN-pwCO180));
psg_abort(1);
}
if((dm[A] == 'y' || dm[B] == 'y' ))
{
printf("incorrect dec1 decoupler flags! Should be 'nnn' ");
psg_abort(1);
}
if((dm2[A] == 'y' || dm2[B] == 'y'))
{
printf("incorrect dec2 decoupler flags! Should be 'nny' ");
psg_abort(1);
}
if( dpwr > 50 )
{
printf("don't fry the probe, DPWR too large! ");
psg_abort(1);
}
/* Phase incrementation for hypercomplex 2D data */
if (phase1 == 1)
{
tsadd(t1, 1, 4);
}
if (phase2 == 2)
{
tsadd(t5,2,4);
icosel = 1;
}
else icosel = -1;
/* Set up f1180 tau1 = t1 */
tau1 = d2;
if ((f1180[A] == 'y') && (ni > 1))
{ tau1 += (1.0/(2.0*sw1)); }
if(tau1 < 0.2e-6) tau1 = 0.0;
tau1 = tau1/4.0;
ratio = 2.0*bigTCO*sw1/((double) ni);
ratio = (double)((int)(ratio*100.0))/100.0;
if (ratio > 1.0) ratio = 1.0;
if((dps_flag) && (ni > 1))
printf("ratio = %f => %f\n",2.0*bigTCO*sw1/((double) ni), ratio);
/* Set up f2180 tau2 = t2 */
tau2 = d3;
if ((f2180[A] == 'y') && (ni2 > 1))
{ tau2 += (1.0/(2.0*sw2)); }
if(tau2 < 0.2e-6) tau2 = 0.0;
tau2 = tau2/4.0;
/* Calculate modifications to phases for States-TPPI acquisition */
if( ix == 1) d2_init = d2 ;
t1_counter = (int)((d2-d2_init)*sw1 + 0.5);
if((t1_counter % 2))
{
tsadd(t1,2,4);
tsadd(t16,2,4);
}
if( ix == 1) d3_init = d3 ;
t2_counter = (int)((d3-d3_init)*sw2 + 0.5);
if((t2_counter % 2))
{
tsadd(t2,2,4);
tsadd(t16,2,4);
}
decstepsize(1.0);
initval(phi_CO, v1);
initval(phi_Ca, v2);
/* BEGIN ACTUAL PULSE SEQUENCE */
status(A);
delay(d1-1.0e-3);
obsoffset(tof);
decoffset(dof);
obspower(tpwr);
decpower(pwClvl);
decpwrf(4095.0);
dec2power(pwNlvl);
txphase(zero);
decphase(zero);
dec2phase(zero);
rcvroff();
if(gt6 > 0.2e-6)
{
delay(10.0e-6);
decrgpulse(pwC, zero, 1.0e-6, 1.0e-6);
delay(0.2e-6);
zgradpulse(gzlvl6, gt6);
}
decpwrf(dfCa180);
delay(1.0e-3);
rgpulse(pw,zero,1.0e-6,1.0e-6);
delay(2.0e-6);
zgradpulse(gzlvl0,gt0);
delay(taua - gt0 - 2.0e-6 - WFG_START_DELAY);
simshaped_pulse("","offC17",2.0*pw,pwCa180,zero,zero,1.0e-6,1.0e-6);
/* c13 offset on CO, slp 180 on Ca */
delay(taua - gt0 - 500.0e-6 - WFG_STOP_DELAY);
zgradpulse(gzlvl0,gt0);
txphase(one);
delay(500.0e-6);
rgpulse(pw, one, 1.0e-6, 1.0e-6);
decphase(zero);
delay(2.0e-6);
zgradpulse(gzlvl3,gt3);
obspower(tpwrHd);
decpwrf(dfCa90);
delay(200.0e-6);
/* c13 offset on CO, slp 90 on Ca */
decshaped_pulse("offC13", pwCa90, zero, 0.0, 0.0);
delay(taub -PRG_START_DELAY);
obsprgon("waltz16", pwHd, 180.0);
xmtron();
decpwrf(dfC90);
decphase(t1);
delay(bigTC -taub -SAPS_DELAY -PWRF_DELAY);
/* c13 offset on CO, on-res 90 on CO */
decshaped_pulse("offC6", pwCO90, t1, 0.0, 0.0);
/* CO EVOLUTION BEGINS */
decpwrf(dfCO180);
decphase(zero);
delay(bigTCO/2.0 +maxpwCN/2.0 +WFG_STOP_DELAY -2.0*pwCO90/PI -ratio*tau1);
/* c13 offset on CO, on-res 180 on CO */
decshaped_pulse("offC8", pwCO180, zero, 0.0, 0.0);
decpwrf(dfCab180);
delay(bigTCO/2.0 +(2.0 -ratio)*tau1 -PRG_STOP_DELAY);
xmtroff();
obsprgoff();
/* c13 offset on CO, slp 180 at Cab */
sim3shaped_pulse("","offC27","",0.0,pwCab180,2.0*pwN,zero,zero,zero,0.0,0.0);
obsprgon("waltz16", pwHd, 180.0);
xmtron();
decpwrf(dfCO180);
delay(bigTCO/2.0 +(2.0 -ratio)*tau1 -PRG_START_DELAY);
/* c13 offset on CO, on-res 180 on CO */
decshaped_pulse("offC8", pwCO180, zero, 0.0, 0.0);
decpwrf(dfC90);
dcplrphase(v1);
delay(bigTCO/2.0 +maxpwCN/2.0 +WFG_STOP_DELAY -2.0*pwCO90/PI -ratio*tau1 -SAPS_DELAY);
/* CO EVOLUTION ENDS */
decshaped_pulse("offC6", pwCO90, zero, 0.0, 0.0);
/* c13 offset on CO, on-res 90 on CO */
decpwrf(dfCa90);
decphase(t3); dcplrphase(v2);
delay(bigTC -2.0*SAPS_DELAY -PWRF_DELAY);
/* c13 offset on CO, slp 90 at Ca */
decshaped_pulse("offC13", pwCa90, t3, 0.0, 0.0);
xmtroff();
decpwrf(dfCO180);
decphase(zero); dcplrphase(zero);
dec2phase(t2);
delay(2.0e-5);
zgradpulse(gzlvl4,gt4);
delay(2.0e-6);
obsprgon("waltz16", pwHd, 180.0);
xmtron();
txphase(zero);
delay(150.0e-6);
dec2rgpulse(pwN, t2, 0.0, 0.0);
/* N15 EVOLUTION BEGINS HERE */
delay(bigTN/2.0 -tau2);
decshaped_pulse("offC8", pwCO180, zero, 0.0, 0.0); /* c13 offset on CO, on-res 180 on CO */
decpwrf(dfCa180);
dec2phase(t4);
delay(bigTN/2.0 -tau2);
dec2rgpulse(2.0*pwN, t4, 0.0, 0.0);
decshaped_pulse("offC17", pwCa180, zero, 0.0, 0.0); /* c13 offset on CO, slp 180 at Ca */
decpwrf(dfCO180);
delay(bigTN/2.0 +tau2 -pwCa180 -WFG_START_DELAY -WFG_STOP_DELAY);
decshaped_pulse("offC8", pwCO180, zero, 0.0, 0.0);
/* c13 offset on CO, on-res 180 on CO */
delay(bigTN/2.0 +tau2 -tauc -PRG_STOP_DELAY);
dec2phase(t5);
xmtroff();
obsprgoff();
obspower(tpwr);
if (mag_flg[A] == 'y') magradpulse(gzcal*gzlvl1, gt1);
else zgradpulse(gzlvl1, gt1);
delay(tauc -gt1 -2.0*GRADIENT_DELAY);
/* N15 EVOLUTION ENDS HERE */
sim3pulse(pw,0.0, pwN, zero,zero, t5, 0.0, 0.0);
dec2phase(zero);
delay(2.0e-6);
zgradpulse(0.8*gzlvl5, gt5);
delay(taud - gt5 - 2.0e-6);
sim3pulse(2.0*pw,0.0, 2.0*pwN, zero,zero, zero, 0.0, 0.0);
delay(taud - gt5 - 500.0e-6);
zgradpulse(0.8*gzlvl5, gt5);
txphase(one);
decphase(one);
delay(500.0e-6);
sim3pulse(pw,0.0, pwN, one,zero, one, 0.0, 0.0);
delay(2.0e-6);
txphase(zero);
decphase(zero);
zgradpulse(gzlvl5, gt5);
delay(taud - gt5 - 2.0e-6);
sim3pulse(2.0*pw,0.0, 2.0*pwN, zero,zero, zero, 0.0, 0.0);
delay(taud - gt5 - 2.0*POWER_DELAY - 500.0e-6);
zgradpulse(gzlvl5, gt5);
decpower(dpwr);
dec2power(dpwr2);
delay(500.0e-6);
rgpulse(pw, zero, 0.0, 0.0);
delay(gstab +gt2 +2.0*GRADIENT_DELAY);
rgpulse(2.0*pw, zero, 0.0, 0.0);
if (mag_flg[A] == 'y') magradpulse(icosel*gzcal*gzlvl2, gt2);
else zgradpulse(icosel*gzlvl2, gt2);
delay(0.5*gstab);
rcvron();
statusdelay(C, 0.5*gstab);
setreceiver(t16);
}
void pulsesequence()
{
/* DECLARE AND LOAD VARIABLES */
char
ch90shape[MAXSTR],
ch180shape[MAXSTR],
exp_mode[MAXSTR], /* flag to run 3D, or 2D time-shared 15N TROSY /13C HSQC-SE*/
decCACO[MAXSTR],
caco180shape[MAXSTR],
f1180[MAXSTR], /* Flag to start t1 @ halfdwell */
f2180[MAXSTR],
f3180[MAXSTR],
f4180[MAXSTR]; /* do TROSY on N15 and H1 */
int icosel, max_pcyc; /* used to get n and p type */
double
tpwrs,
ni2=getval("ni2"),
ni3=getval("ni3"),
tau1, tau1p,tau2,tau3,tau3p, /*evolution times in indirect dimensions */
tauNH=getval("tauNH"), /* 1/(4Jhn)*/
tauCH=getval("tauCH"), /* 1/(4Jch) */
tauCH1= getval("tauCH1"), /* tauCH/2.0+tauNH/2.0,*/ /* 1/(8Jch) +1/(8Jnh) */
tauCH2= getval("tauCH2"),
swC = getval("swC"), /* spectral widths in 13C methyls */
pwClvl = getval("pwClvl"), /* coarse power for C13 pulse */
pwC = getval("pwC"), /* C13 90 degree pulse length at pwClvl */
swN = getval("swN"), /* spectral widths in 15N */
pwNlvl = getval("pwNlvl"), /* power for N15 pulses */
pwN = getval("pwN"), /* N15 90 degree pulse length at pwNlvl */
ch90pwr=getval("ch90pwr"),
ch90pw=getval("ch90pw"),
ch90corr=getval("ch90corr"),
ch90dres=getval("ch90dres"),
ch90dmf=getval("ch90dmf"),
ch180pw=getval("ch180pw"),
ch180pwr=getval("ch180pwr"),
caco180pw=getval("caco180pw"),
caco180pwr=getval("caco180pwr"),
mix=getval("mix"),
tpwrsf_d = getval("tpwrsf_d"), /* fine power adustment for first soft pulse(down)*/
tpwrsf_u = getval("tpwrsf_u"), /* fine power adustment for second soft pulse(up) */
pwHs = getval("pwHs"), /* H1 90 degree pulse length at tpwrs */
compH =getval("compH"),
gstab = getval("gstab"),
gt0 = getval("gt0"),
gt1 = getval("gt1"),
gt2 = getval("gt2"),
gt3 = getval("gt3"),
gt4 = getval("gt4"),
gt5 = getval("gt5"),
gt6 = getval("gt6"),
gt7 = getval("gt7"),
gt8 = getval("gt8"),
gt9 = getval("gt9"),
gt10 = getval("gt10"),
gzlvl0 = getval("gzlvl0"),
gzlvl1 = getval("gzlvl1"),
gzlvl2 = getval("gzlvl2"),
gzlvl3 = getval("gzlvl3"),
gzlvl4 = getval("gzlvl4"),
gzlvl5 = getval("gzlvl5"),
gzlvl6 = getval("gzlvl6"),
gzlvl7 = getval("gzlvl7"),
gzlvl8 = getval("gzlvl8"),
gzlvl9 = getval("gzlvl9"),
gzlvl10 = getval("gzlvl10"),
gzlvl11 = getval("gzlvl11");
getstr("f1180",f1180);
getstr("f2180",f2180);
getstr("ch180shape",ch180shape);
getstr("ch90shape",ch90shape);
getstr("decCACO",decCACO);
getstr("caco180shape",caco180shape);
getstr("exp_mode",exp_mode);
tpwrs = tpwr - 20.0*log10(pwHs/(compH*pw*1.69)); /*needs 1.69 times more*/
tpwrs = (int) (tpwrs); /*power than a square pulse */
if (tpwrsf_d<4095.0)
tpwrs=tpwrs+6.0; /* add 6dB to let tpwrsf_d control fine power ~2048*/
if( (exp_mode[A]!='2') && (exp_mode[A]!='3') && (exp_mode[A]!='4') )
{text_error("invalid exp_mode, Should be either 2D or 3D or 4D\n "); psg_abort(1); }
/* LOAD PHASE TABLE */
settable(t1,1,phi1);
settable(t2,4,phi2);
settable(t12,4,phi2); {tsadd(t12,2,4);}
settable(t3,1,phi3);
settable(t4,2,phi4);
settable(t5,2,phi5);
settable(t6,4,phi6);
settable(t7,8,phi7);
settable(t8,8,phi8);
/* changing sign */
if( (exp_mode[A]=='4') && (exp_mode[C]=='a') )
{tsadd(t7,2,4); tsadd(t5,2,4); }
settable(t21,1,psi1); /*trosy and SE hsqc in reverse INPET */
settable(t22,1,psi2);
settable(t23,1,psi2c);
if(exp_mode[A]=='2') {settable(t31,2,rec);}
if(exp_mode[A]=='3') {settable(t31,4,rec);}
if(exp_mode[A]=='4') {settable(t31,8,rec);}
if((dm2[A] == 'y') || (dm2[B] == 'y') || (dm2[C] == 'y') || (dm2[D] == 'y'))
{ text_error("incorrect dec2 decoupler flags! Should be 'nnnn' "); psg_abort(1); }
/* special case for swapping t2 and t3 for test purposes */
if( (exp_mode[A]=='4') && (exp_mode[B]=='x') && (ni3=1) )
{
text_error("Acquiring t3 axis in ni2 dimension (instead of t2), set nt to 8! ");
tau3 = 0.5*(d3_index/swC+0.5/swC)-pw-rof1 -pwC*2.0/M_PI ; /* increment corresponds to 13C increment */
tau3p = 0.5*(d3_index/swN+0.5/swN) -pw-rof1 -pwC -pwN*2.0/M_PI -tau3;
if(d3_index % 2) { tsadd(t7,2,4); tsadd(t8,2,4); tsadd(t31,2,4); }
if (phase2 == 2) {tsadd(t7 ,1,4); tsadd(t8 ,1,4);}
tau2=0.0;
}
else {
if (phase2 == 2) {tsadd(t2 ,1,4); tsadd(t12,1,4);}
if (phase3 == 2) {tsadd(t7 ,1,4); tsadd(t8 ,1,4);}
if(d3_index % 2) { tsadd(t2,2,4); tsadd(t12,2,4); tsadd(t31,2,4); }
tau3 = 0.5*(d4_index/swC+0.5/swC)-pw -rof1 -pwC*2.0/M_PI ; /* increment corresponds to 13C increment */
tau3p = 0.5*(d4_index/swN+0.5/swN) -pw -rof1 -pwC -pwN*2.0/M_PI -tau3;
if(d4_index % 2) { tsadd(t7,2,4); tsadd(t8,2,4); tsadd(t31,2,4); }
tau2 = d3;
tau2 += 0.0*(-pw*4.0/M_PI-rof1*2.0);
if((f2180[A] == 'y') && (ni2 > 0.0)) {tau2 += ( 1.0 / (2.0*sw2) ); }
if(tau2 < 0.2e-6) {tau2 = 0.0;}
tau2 = tau2/2.0;
}
/* simultaneous Ntrosy-ChsqcSE, last part */
/* Phase incrementation for hypercomplex 2D data, States-Haberkorn element */
if (phase1 == 1) {icosel = 1; }
else { tsadd(t21,2,4); tsadd(t22,2,4); tsadd(t23,2,4); icosel = -1; }
if(d2_index % 2) { tsadd(t4,2,4); tsadd(t5,2,4); tsadd(t31,2,4); }
/* ECHO-ANTIECHO + STATES-TPPI t1, t1' in TROSY/HSQC last step */
tau1 = 1.0*d2_index/swC; /* increment corresponds to 13C increment */
tau1p = 1.0*d2_index*(1.0/swN-1.0/swC);
/* BEGIN PULSE SEQUENCE */
status(A);
obspower(tpwr);
decpower(pwClvl);
dec2power(pwNlvl);
txphase(zero);
decphase(zero);
dec2phase(zero);
delay(d1);
/* Destroy 13C magnetization*/
decrgpulse(pwC*1.0, zero, 0.0, 0.0);
zgradpulse(-gzlvl0, gt0);
delay(gstab);
/* NOESY */
if(exp_mode[A]!='2')
{ /* 3-4D */
if(exp_mode[A]=='4')
{ /* full 4D */
/* t3 evolution, the very first HSQC */
/* Hz -> HzXz INEPT */
rgpulse(pw,two,rof1,rof1); /* 1H pulse excitation */
zgradpulse(gzlvl7, gt0); delay(tauCH-gt0);
decrgpulse(pwC*2.0, zero, 0.0, 0.0); delay(tauNH -tauCH -pwC*2.0 );
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
delay(tauNH - gt0 -gstab); zgradpulse(gzlvl7, gt0); delay(gstab);
rgpulse(pw, one, rof1, rof1);
/* water defoc-refoc */
delay(gstab); zgradpulse(gzlvl8, gt8); delay(gstab);
/* t3 time */
if((ni3==0))
{
dec2rgpulse(pwN,t7,0.0,0.0);
dec2rgpulse(pwN,two,0.0,0.0);
decrgpulse(pwC, t8, 0.0, 0.0);
decrgpulse(pwC, two, 0.0, 0.0);
rgpulse(pw*2.0, zero, rof1, rof1);
delay(pwN*2.0+pwC*2.0);
}
else
{
dec2rgpulse(pwN,t7,0.0,0.0);
delay(tau3p);
decrgpulse(pwC, t8, 0.0, 0.0);
delay(tau3);
rgpulse(pw*2.0, zero, rof1, rof1);
delay(tau3);
decrgpulse(pwC, two, 0.0, 0.0);
delay(tau3p);
dec2rgpulse(pwN,two,0.0,0.0);
}
/* water defoc-refoc */
delay(gstab); zgradpulse(gzlvl8, gt8); delay(gstab);
/* back inept, water to +Z */
rgpulse(pw,one,rof1,rof1);
zgradpulse(gzlvl9, gt0); delay(tauCH-gt0);
decrgpulse(pwC*2.0, zero, 0.0, 0.0); delay(tauNH -tauCH -pwC*2.0 );
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
delay(tauNH - gt0 -gstab); zgradpulse(gzlvl9, gt0); delay(gstab);
rgpulse(pw, two, rof1, rof1);
/* purge */
zgradpulse(gzlvl10, gt10); delay(2.0*gstab);
} /*end of full 4D */
/************************* t2 evolution, 1H and NOE****************************** */
/* for the case of no flipbacks in NOE part of the experiment, shift first pulse
in t2 time by 45 deg and let water bring itself back at the end
of mixing time by radiation dumping */
if( (exp_mode[D]=='t') )
{ initval(1.0, v10);
obsstepsize(45.0);
xmtrphase(v10);
}
else
{
xmtrphase(zero);
obspower(tpwrs); obspwrf(tpwrsf_d);
shaped_pulse("H2Osinc",pwHs,t12,rof1,rof1);
obspower(tpwr); obspwrf(4095.0);
}
rgpulse(pw,t2,rof1,rof1);
xmtrphase(zero); /* SAPS_DELAY */
delay(tau2);
decrgpulse(2.0*pwC,zero,0.0,0.0); dec2rgpulse(2.0*pwN,zero,0.0,0.0);
delay(tau2);
rgpulse(pw*2.0,zero,rof1,rof1);
delay(pwN*2.0+pwC*2.0 + SAPS_DELAY);
rgpulse(pw,zero,rof1,rof1);
if( (exp_mode[D]!='t') )
{
obspower(tpwrs); obspwrf(tpwrsf_u);
shaped_pulse("H2Osinc",pwHs,zero,rof1,rof1);
obspower(tpwr); obspwrf(4095.0);
}
/* NOESY period */
delay(mix-gt2-4.0*gstab );
zgradpulse(gzlvl2, gt2);
delay(4.0*gstab);
} /* end 3-4 D acquisition */
/* N-TROSY/C-HSQCse */
/* Hz -> HzXz INEPT */
rgpulse(pw,two,rof1,rof1); /* 1H pulse excitation */
zgradpulse(gzlvl0, gt0);
delay(tauCH-gt0);
decrgpulse(pwC*2.0, zero, 0.0, 0.0);
delay(tauNH -tauCH -pwC*2.0 );
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
delay(tauNH - gt0 -gstab);
zgradpulse(gzlvl0, gt0);
delay(gstab);
rgpulse(pw, one, rof1, rof1);
/* on HzXz now */
/* water flipback*/
obspower(tpwrs); obspwrf(tpwrsf_u);
shaped_pulse("H2Osinc",pwHs,two,rof1,rof1);
obspower(tpwr); obspwrf(4095.0);
/* purge */
zgradpulse(gzlvl3, gt3);
dec2phase(t4);
delay(gstab*2.0);
/* t1 (C) and t1+t1'(N) evolution */
dec2rgpulse(pwN, t4, 0.0, 0.0);
delay(gt4+gstab + gt4+gstab + pwC*3.0
+2.0*(pwHs +2.0*rof1));
if(decCACO[A]=='y'){ delay(2.0*caco180pw);}
dec2rgpulse(2.0*pwN, zero, 0.0, 0.0);
delay(tau1p); /* t1 */
decrgpulse(pwC,t5,0.0,0.0);
delay(tau1*0.5);
if(decCACO[A]=='y')
{
decpower(caco180pwr);
decshaped_pulse(caco180shape,caco180pw,zero, 0.0, 0.0);
decpower(pwClvl);
}
obspower(ch180pwr); /*180 on methyls*/
shaped_pulse(ch180shape,ch180pw,zero,rof1,rof1);
obspower(tpwr);
delay(tau1*0.5);
zgradpulse(gzlvl4, gt4); /*coding */
delay(gstab + pwHs -ch180pw -2.0*GRADIENT_DELAY -2.0*POWER_DELAY -WFG_START_DELAY- WFG_STOP_DELAY);
decrgpulse(2.0*pwC,zero,0.0,0.0);
if(decCACO[A]=='y')
{
decpower(caco180pwr);
decshaped_pulse(caco180shape,caco180pw,zero, 0.0, 0.0);
decpower(pwClvl);
}
/* delay(ch180pw+2.0*rof1);*/
zgradpulse(gzlvl5, gt4);
delay(gstab - rof1 -2.0*GRADIENT_DELAY -2.0*POWER_DELAY -WFG_START_DELAY- WFG_STOP_DELAY);
/*Water flipback (flipdown actually ) */
obspower(tpwrs); obspwrf(tpwrsf_d);
shaped_pulse("H2Osinc",pwHs,three,rof1,rof1);
obspower(tpwr); obspwrf(4095.0);
/* reverse double INEPT */
sim3pulse(pw, pwC, 0.0, t21, t23, zero, rof1, rof1);
/* rgpulse(pw, t21, rof1, rof1); */
zgradpulse(gzlvl11, gt1);
delay(gstab);
delay(tauCH1 -gt1 -gstab -2.0*pwC
+ (-2.0/M_PI*pwC-0.5*(pwN-pwC) +pwN));
decrgpulse(2.0*pwC,zero,0.0,0.0);
delay(tauNH -tauCH1 - 0.65*(pw + pwN)-rof1 -(pwC-pw)
-(-2.0/M_PI*pwC-0.5*(pwN-pwC) +pwN) );
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
zgradpulse(gzlvl11, gt1);
delay(gstab);
delay(tauCH1-gt1 -gstab-2.0*pwC);
decrgpulse(2.0*pwC,zero,0.0,0.0);
delay(tauNH -1.3*pwN -tauCH1);
sim3pulse(pw, pwC, pwN, one, zero, zero, 0.0, 0.0);
zgradpulse(gzlvl1, gt1);
delay(gstab);
delay(tauCH2-2.0*pwC-gt1-gstab);
decrgpulse(2.0*pwC,zero,0.0,0.0);
delay(tauNH -1.3*pwN-tauCH2);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
zgradpulse(gzlvl1, gt1);
delay(gstab);
delay(tauNH-1.6*pwN -POWER_DELAY -ch90pw*ch90corr -gt1-gstab +pwN*0.5 -PRG_START_DELAY);
/* delay(ch90pw*0.5);
sim3pulse(0.0,0.0, pwN, one, zero, t22, 0.0, 0.0);
delay(ch90pw*0.5);*/
/* sim3shaped_pulse(ch90shape,"hard","hard",ch90pw,0.0, pwN, zero,zero, t22,0.0,0.0);*/
/* ch90corr is a fraction of ch90pw to correct for a 1H phase rollcaused by shaped 90 on
CH3 protons for a sinc pulse ch90corr=0.41 seems to be good. */
obspower(ch90pwr);
txphase(one);
obsunblank(); xmtron();
obsprgon(ch90shape,1.0/ch90dmf,ch90dres); /*PRG_START_DELAY */
delay(ch90pw*ch90corr-pwN*0.5);
dec2rgpulse(pwN, t22, 0.0, 0.0);
delay(ch90pw*(1.0-ch90corr)-pwN*0.5);
obsprgoff(); xmtroff(); obsblank(); /*PRG_STOP_DELAY */
obspower(tpwr); /*POWER_DEALY */
delay( gstab +gt6 +2.0*GRADIENT_DELAY
+2.0*POWER_DELAY -0.65*pw -POWER_DELAY
+pwN*0.5 -ch90pw*(1.0-ch90corr)
-PRG_STOP_DELAY);
rgpulse(2.0*pw, zero, rof1, rof1);
dec2power(dpwr2); decpower(dpwr); /* 2.0*POWER_DELAY */
zgradpulse(gzlvl6*icosel, gt6); /* 2.0*GRADIENT_DELAY */
delay(gstab);
status(C);
setreceiver(t31);
}
void pulsesequence()
{
/* DECLARE AND LOAD VARIABLES */
char f1180[MAXSTR], /* Flag to start t1 @ halfdwell */
mag_flg[MAXSTR], /*magic angle gradient*/
f2180[MAXSTR], /* Flag to start t2 @ halfdwell */
stCdec[MAXSTR], /* calls STUD+ waveforms from shapelib */
STUD[MAXSTR]; /* apply automatically calculated STUD decoupling */
int icosel1, /* used to get n and p type */
icosel2,
t1_counter, /* used for states tppi in t1 */
t2_counter, /* used for states tppi in t2 */
ni2 = getval("ni2");
double tau1, /* t1 delay */
tau2, /* t2 delay */
del = getval("del"), /* time delays for CH coupling evolution */
BPdpwrspinlock, /* user-defined upper limit for spinlock(Hz) */
BPpwrlimits, /* =0 for no limit, =1 for limit */
del1 = getval("del1"),
del2 = getval("del2"),
/* STUD+ waveforms automatically calculated by macro "biocal" */
/* and string parameter stCdec calls them from your shapelib. */
stdmf, /* dmf for STUD decoupling */
studlvl, /* coarse power for STUD+ decoupling */
rf80 = getval("rf80"), /* rf in Hz for 80ppm STUD+ */
bw, ofs, ppm, /* temporary Pbox parameters */
pwClvl = getval("pwClvl"), /* coarse power for C13 pulse */
pwC = getval("pwC"), /* C13 90 degree pulse length at pwClvl */
rf0, /* maximum fine power when using pwC pulses */
/* p_d is used to calculate the isotropic mixing on the Cab region */
spinlock = getval("spinlock"), /* DIPSI-3 spinlock field strength in Hz */
p_d, /* 50 degree pulse for DIPSI-2 at rfd */
rfd, /* fine power for 7 kHz rf for 500MHz magnet */
ncyc = getval("ncyc"), /* no. of cycles of DIPSI-3 */
/* the following pulse lengths for SLP pulses are automatically calculated */
/* by the macro "ghcch_tocsy" . SLP pulse shapes, "offC10" etc are called */
/* directly from your shapelib. */
pwC10, /* 180 degree selective sinc pulse on CO(174ppm) */
pwZ, /* the largest of pwC10 and 2.0*pwN */
rf10, /* fine power for the pwC10 ("offC10") pulse */
compC = getval("compC"), /* adjustment for C13 amplifier compression */
pwNlvl = getval("pwNlvl"), /* power for N15 pulses */
pwN = getval("pwN"), /* N15 90 degree pulse length at pwNlvl */
sw1 = getval("sw1"),
sw2 = getval("sw2"),
gt1 = getval("gt1"), /* coherence pathway gradients */
gzcal = getval("gzcal"), /* G/cm to DAC coversion factor*/
gzlvl1 = getval("gzlvl1"),
gzlvl2 = getval("gzlvl2"),
gt3 = getval("gt3"), /* other gradients */
gt5 = getval("gt5"),
gzlvl3 = getval("gzlvl3"),
gzlvl4 = getval("gzlvl4"),
gzlvl5 = getval("gzlvl5"),
gzlvl6 = getval("gzlvl6");
getstr("STUD",STUD);
getstr("mag_flg",mag_flg);
getstr("f1180",f1180);
getstr("f2180",f2180);
strcpy(stCdec, "stCdec80");
stdmf = getval("dmf80");
studlvl = pwClvl + 20.0*log10(compC*pwC*4.0*rf80);
studlvl = (int) (studlvl + 0.5);
P_getreal(GLOBAL,"BPpwrlimits",&BPpwrlimits,1);
P_getreal(GLOBAL,"BPdpwrspinlock",&BPdpwrspinlock,1);
/* LOAD PHASE TABLE */
settable(t3,2,phi3);
settable(t6,1,phi6);
settable(t5,4,phi5);
settable(t10,1,phi10);
settable(t11,4,rec);
/* INITIALIZE VARIABLES */
if (BPpwrlimits > 0.5)
{
if (spinlock > BPdpwrspinlock)
{
spinlock = BPdpwrspinlock;
printf("spinlock too large, reset to user-defined limit (BPdpwrspinlock)");
psg_abort(1);
}
}
if( dpwrf < 4095 )
{ printf("reset dpwrf=4095 and recalibrate C13 90 degree pulse");
psg_abort(1); }
/* maximum fine power for pwC pulses */
rf0 = 4095.0;
setautocal(); /* activate auto-calibration flags */
if (autocal[0] == 'n')
{
/* "offC10": 180 degree one-lobe sinc pulse on CO, null at Ca 139ppm away */
pwC10 = getval("pwC10");
rf10 = (compC*4095.0*pwC*2.0*1.65)/pwC10; /* needs 1.65 times more */
rf10 = (int) (rf10 + 0.5); /* power than a square pulse */
if( pwC > (24.0e-6*600.0/sfrq) )
{ printf("Increase pwClvl so that pwC < 24*600/sfrq");
psg_abort(1);
}
}
else /* if autocal = 'y'(yes), 'q'(quiet), r(read), or 's'(semi) */
{
if(FIRST_FID) /* call Pbox */
{
ppm = getval("dfrq");
bw = 118.0*ppm; ofs = 139.0*ppm;
offC10 = pbox_make("offC10", "sinc180n", bw, ofs, compC*pwC, pwClvl);
if(dm3[B] == 'y') H2ofs = 3.2;
ofs_check(H1ofs, C13ofs, N15ofs, H2ofs);
}
rf10 = offC10.pwrf; pwC10 = offC10.pw;
}
/* dipsi-3 decoupling on CbCa */
p_d = (5.0)/(9.0*4.0*spinlock); /* DIPSI-3 Field Strength */
rfd = (compC*4095.0*pwC*5.0)/(p_d*9.0);
rfd = (int) (rfd + 0.5);
ncyc = (int) (ncyc + 0.5);
/* CHECK VALIDITY OF PARAMETER RANGES */
if( gt1 > 0.5*del - 1.0e-4)
{
printf(" gt1 is too big. Make gt1 less than %f.\n", (0.5*del - 1.0e-4));
psg_abort(1);
}
if( dm[A] == 'y' )
{
printf("incorrect dec1 decoupler flag! Should be 'nny' or 'nnn' ");
psg_abort(1);
}
if((dm2[A] == 'y' || dm2[C] == 'y'))
{
printf("incorrect dec2 decoupler flags! Should be 'nnn' ");
psg_abort(1);
}
if((dm3[A] == 'y' || dm3[C] == 'y'))
{
printf("incorrect dec3 decoupler flags! Should be 'nnn' or 'nyn' ");
psg_abort(1);
}
if( dpwr > 52 )
{
printf("don't fry the probe, DPWR too large! ");
psg_abort(1);
}
if( pw > 50.0e-6 )
{
printf("dont fry the probe, pw too high ! ");
psg_abort(1);
}
if( pwN > 100.0e-6 )
{
printf("dont fry the probe, pwN too high ! ");
psg_abort(1);
}
/* PHASES AND INCREMENTED TIMES */
/* Phase incrementation for hypercomplex 2D data, States-Haberkorn element */
icosel1 = -1; icosel2 = -1;
if (phase1 == 2)
{ tsadd(t6,2,4); icosel1 = -1*icosel1; }
if (phase2 == 2)
{ tsadd(t10,2,4); icosel2 = -1*icosel2; tsadd(t6,2,4); }
/* Set up f1180 */
tau1 = d2;
if((f1180[A] == 'y') && (ni > 1.0))
{ tau1 += ( 1.0 / (2.0*sw1) ); if(tau1 < 0.2e-6) tau1 = 0.0; }
tau1 = tau1/2.0;
/* Set up f2180 */
tau2 = d3;
if((f2180[A] == 'y') && (ni2 > 1.0))
{ tau2 += ( 1.0 / (2.0*sw2) ); if(tau2 < 0.2e-6) tau2 = 0.0; }
tau2 = tau2/2.0;
/* Calculate modifications to phases for States-TPPI acquisition */
if( ix == 1) d2_init = d2;
t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
if(t1_counter % 2)
{ tsadd(t3,2,4); tsadd(t11,2,4); }
if( ix == 1) d3_init = d3;
t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
if(t2_counter % 2)
{ tsadd(t5,2,4); tsadd(t11,2,4); }
/* BEGIN PULSE SEQUENCE */
status(A);
if ( dm3[B] == 'y' )
lk_sample();
if ((ni/sw1-d2)>0)
delay(ni/sw1-d2); /*decreases as t1 increases for const.heating*/
if ((ni2/sw2-d3)>0)
delay(ni2/sw2-d3); /*decreases as t2 increases for const.heating*/
delay(d1);
if ( dm3[B] == 'y' )
{ lk_hold(); lk_sampling_off();} /*freezes z0 correction, stops lock pulsing*/
rcvroff();
obspower(tpwr);
decpower(pwClvl);
dec2power(pwNlvl);
decpwrf(rf0);
obsoffset(tof);
txphase(t3);
delay(1.0e-5);
decrgpulse(pwC, zero, 0.0, 0.0); /*destroy C13 magnetization*/
zgradpulse(gzlvl1, 0.5e-3);
delay(1.0e-4);
decrgpulse(pwC, one, 0.0, 0.0);
zgradpulse(0.7*gzlvl1, 0.5e-3);
delay(5.0e-4);
if ( dm3[B] == 'y' ) /* begins optional 2H decoupling */
{
dec3rgpulse(1/dmf3,one,10.0e-6,2.0e-6);
dec3unblank();
dec3phase(zero);
delay(2.0e-6);
setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
}
rgpulse(pw, t3, 0.0, 0.0); /* 1H pulse excitation */
decphase(zero);
delay(0.5*del + tau1 - 2.0*pwC);
decrgpulse(2.0*pwC, zero, 0.0, 0.0);
txphase(zero);
delay(tau1);
rgpulse(2.0*pw, zero, 0.0, 0.0);
if (mag_flg[A] == 'y')
{
magradpulse(icosel1*gzcal*gzlvl1,0.1*gt1);
}
else
{
zgradpulse(icosel1*gzlvl1, 0.1*gt1);
}
decphase(t5);
delay(0.5*del - 0.1*gt1);
simpulse(pw, pwC, zero, t5, 0.0, 0.0);
zgradpulse(gzlvl3, gt3);
decphase(zero);
delay(0.5*del2 - gt3);
simpulse(2.0*pw, 2.0*pwC, zero, zero, 0.0, 0.0);
zgradpulse(gzlvl3, gt3);
txphase(t6);
decphase(one);
delay(0.5*del2 - gt3);
simpulse(pw, pwC, t6, one, 0.0, 0.0);
zgradpulse(gzlvl4, gt3);
txphase(zero);
decphase(zero);
delay(0.5*del1 - gt3);
simpulse(2.0*pw, 2.0*pwC, zero, zero, 0.0, 0.0);
zgradpulse(gzlvl4, gt3);
delay(0.5*del1 - gt3);
decrgpulse(pwC, zero, 0.0, 0.0);
decpwrf(rfd);
delay(2.0e-6);
initval(ncyc, v2);
starthardloop(v2);
decrgpulse(4.9*p_d,zero,0.0,0.0);
decrgpulse(7.9*p_d,two,0.0,0.0);
decrgpulse(5.0*p_d,zero,0.0,0.0);
decrgpulse(5.5*p_d,two,0.0,0.0);
decrgpulse(0.6*p_d,zero,0.0,0.0);
decrgpulse(4.6*p_d,two,0.0,0.0);
decrgpulse(7.2*p_d,zero,0.0,0.0);
decrgpulse(4.9*p_d,two,0.0,0.0);
decrgpulse(7.4*p_d,zero,0.0,0.0);
decrgpulse(6.8*p_d,two,0.0,0.0);
decrgpulse(7.0*p_d,zero,0.0,0.0);
decrgpulse(5.2*p_d,two,0.0,0.0);
decrgpulse(5.4*p_d,zero,0.0,0.0);
decrgpulse(0.6*p_d,two,0.0,0.0);
decrgpulse(4.5*p_d,zero,0.0,0.0);
decrgpulse(7.3*p_d,two,0.0,0.0);
decrgpulse(5.1*p_d,zero,0.0,0.0);
decrgpulse(7.9*p_d,two,0.0,0.0);
decrgpulse(4.9*p_d,two,0.0,0.0);
decrgpulse(7.9*p_d,zero,0.0,0.0);
decrgpulse(5.0*p_d,two,0.0,0.0);
decrgpulse(5.5*p_d,zero,0.0,0.0);
decrgpulse(0.6*p_d,two,0.0,0.0);
decrgpulse(4.6*p_d,zero,0.0,0.0);
decrgpulse(7.2*p_d,two,0.0,0.0);
decrgpulse(4.9*p_d,zero,0.0,0.0);
decrgpulse(7.4*p_d,two,0.0,0.0);
decrgpulse(6.8*p_d,zero,0.0,0.0);
decrgpulse(7.0*p_d,two,0.0,0.0);
decrgpulse(5.2*p_d,zero,0.0,0.0);
decrgpulse(5.4*p_d,two,0.0,0.0);
decrgpulse(0.6*p_d,zero,0.0,0.0);
decrgpulse(4.5*p_d,two,0.0,0.0);
decrgpulse(7.3*p_d,zero,0.0,0.0);
decrgpulse(5.1*p_d,two,0.0,0.0);
decrgpulse(7.9*p_d,zero,0.0,0.0);
decrgpulse(4.9*p_d,two,0.0,0.0);
decrgpulse(7.9*p_d,zero,0.0,0.0);
decrgpulse(5.0*p_d,two,0.0,0.0);
decrgpulse(5.5*p_d,zero,0.0,0.0);
decrgpulse(0.6*p_d,two,0.0,0.0);
decrgpulse(4.6*p_d,zero,0.0,0.0);
decrgpulse(7.2*p_d,two,0.0,0.0);
decrgpulse(4.9*p_d,zero,0.0,0.0);
decrgpulse(7.4*p_d,two,0.0,0.0);
decrgpulse(6.8*p_d,zero,0.0,0.0);
decrgpulse(7.0*p_d,two,0.0,0.0);
decrgpulse(5.2*p_d,zero,0.0,0.0);
decrgpulse(5.4*p_d,two,0.0,0.0);
decrgpulse(0.6*p_d,zero,0.0,0.0);
decrgpulse(4.5*p_d,two,0.0,0.0);
decrgpulse(7.3*p_d,zero,0.0,0.0);
decrgpulse(5.1*p_d,two,0.0,0.0);
decrgpulse(7.9*p_d,zero,0.0,0.0);
decrgpulse(4.9*p_d,zero,0.0,0.0);
decrgpulse(7.9*p_d,two,0.0,0.0);
decrgpulse(5.0*p_d,zero,0.0,0.0);
decrgpulse(5.5*p_d,two,0.0,0.0);
decrgpulse(0.6*p_d,zero,0.0,0.0);
decrgpulse(4.6*p_d,two,0.0,0.0);
decrgpulse(7.2*p_d,zero,0.0,0.0);
decrgpulse(4.9*p_d,two,0.0,0.0);
decrgpulse(7.4*p_d,zero,0.0,0.0);
decrgpulse(6.8*p_d,two,0.0,0.0);
decrgpulse(7.0*p_d,zero,0.0,0.0);
decrgpulse(5.2*p_d,two,0.0,0.0);
decrgpulse(5.4*p_d,zero,0.0,0.0);
decrgpulse(0.6*p_d,two,0.0,0.0);
decrgpulse(4.5*p_d,zero,0.0,0.0);
decrgpulse(7.3*p_d,two,0.0,0.0);
decrgpulse(5.1*p_d,zero,0.0,0.0);
decrgpulse(7.9*p_d,two,0.0,0.0);
endhardloop();
dec2phase(zero);
decphase(zero);
txphase(zero);
decpwrf(rf10);
delay(tau2);
/* WFG3_START_DELAY */
sim3shaped_pulse("", "offC10", "", 2.0*pw, pwC10, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
if(pwC10>2.0*pwN) pwZ=0.0; else pwZ=2.0*pwN - pwC10;
delay(tau2);
decpwrf(rf0);
if (mag_flg[A] == 'y')
{
magradpulse(-icosel2*gzcal*gzlvl2, 1.8*gt1);
}
else
{
zgradpulse(-icosel2*gzlvl2, 1.8*gt1);
}
delay(2.02e-4);
decrgpulse(2.0*pwC, zero, 0.0, 0.0);
decpwrf(rf10);
if (mag_flg[A] == 'y')
{
magradpulse(icosel2*gzcal*gzlvl2, 1.8*gt1);
}
else
{
zgradpulse(icosel2*gzlvl2, 1.8*gt1);
}
delay(2.0e-4 + WFG3_START_DELAY + pwZ);
decshaped_pulse("offC10", pwC10, zero, 0.0, 0.0);
decpwrf(rf0);
decrgpulse(pwC, zero, 2.0e-6, 0.0);
zgradpulse(gzlvl5, gt5);
delay(0.5*del1 - gt5);
simpulse(2.0*pw, 2.0*pwC, zero, zero, 0.0, 0.0);
zgradpulse(gzlvl5, gt5);
txphase(one);
decphase(t10);
delay(0.5*del1 - gt5);
simpulse(pw, pwC, one, t10, 0.0, 0.0);
zgradpulse(gzlvl6, gt5);
txphase(zero);
decphase(zero);
delay(0.5*del2 - gt5);
simpulse(2.0*pw, 2.0*pwC, zero, zero, 0.0, 0.0);
zgradpulse(gzlvl6, gt5);
delay(0.5*del2 - gt5);
simpulse(pw, pwC, zero, zero, 0.0, 0.0);
delay(0.5*del - 0.5*pwC);
simpulse(2.0*pw,2.0*pwC, zero, zero, 0.0, 0.0);
if (mag_flg[A] == 'y')
magradpulse(gzcal*gzlvl1, gt1);
else
zgradpulse(gzlvl1, gt1);
rcvron();
if ((STUD[A]=='n') && (dm[C] == 'y'))
decpower(dpwr);
if ( dm3[B] == 'y' ) /* turns off 2H decoupling */
{
delay(0.5*del-40.0e-6 -gt1 -1/dmf3);
setstatus(DEC3ch, FALSE, 'c', FALSE, dmf3);
dec3rgpulse(1/dmf3,three,2.0e-6,2.0e-6);
dec3blank();
lk_autotrig(); /* resumes lock pulsing */
lk_sample();
if (mag_flg[A] == 'y')
statusdelay(C,40.0e-6 - 2.0*VAGRADIENT_DELAY - POWER_DELAY);
else
statusdelay(C,40.0e-6 - 2.0*GRADIENT_DELAY - POWER_DELAY);
}
else
{
delay(0.5*del-40.0e-6 -gt1);
if (mag_flg[A] == 'y')
statusdelay(C,40.0e-6 - 2.0*VAGRADIENT_DELAY - POWER_DELAY);
else
statusdelay(C,40.0e-6 - 2.0*GRADIENT_DELAY - POWER_DELAY);
}
if ((STUD[A]=='y') && (dm[C] == 'y'))
{decpower(studlvl);
decunblank();
decon();
decprgon(stCdec,1/stdmf, 1.0);
startacq(alfa);
acquire(np, 1.0/sw);
decprgoff();
decoff();
decblank();
}
setreceiver(t11);
}
pulsesequence()
{
/* DECLARE AND LOAD VARIABLES */
char
CA90_in_str[MAXSTR],
CA180_in_str[MAXSTR], CA180n_in_str[MAXSTR],
CO180offCA_in_str[MAXSTR],
RFpars[MAXSTR],
exp_mode[MAXSTR], /* flag to run 3D, or 2D time-shared 15N TROSY /13C HSQC-SE*/
f1180[MAXSTR], /* Flag to start t1 @ halfdwell */
f2180[MAXSTR],
f3180[MAXSTR]; /* do TROSY on N15 and H1 */
int icosel=1.0; /* used to get n and p type */
double x,y,z, t2max, t1max, tpwrs,
tpwrsf_d = getval("tpwrsf_d"), /* fine power adustment for first soft pulse(down)*/
tpwrsf_u = getval("tpwrsf_u"), /* fine power adustment for second soft pulse(up) */
pwHs = getval("pwHs"), /* H1 90 degree pulse length at tpwrs */
compH =getval("compH"),
tau1, tau2, /*evolution times in indirect dimensions */
ni2=getval("ni2"),
tauNH=getval("tauNH"), /* 1/(4Jhn), INEPTs, 2.4ms*/
tauNH1=getval("tauNH1"), /* 1/(4Jhn), TROSY in CN CT, 2.7ms*/
timeTN1=getval("timeTN1"), /* CT time for (first) N->CA*N transfer */
timeTN=getval("timeTN"), /* CT time for last SE TROSY */
timeCN=getval("timeCN"), /* CT time for CA -> N transfer, middle */
pwClvl = getval("pwClvl"), /* coarse power for C13 pulse */
pwC = getval("pwC"), /* C13 90 degree pulse length at pwClvl */
compC = getval("compC"),
dfrq = getval("dfrq"),
pwNlvl = getval("pwNlvl"), /* power for N15 pulses */
pwN = getval("pwN"), /* N15 90 degree pulse length at pwNlvl */
gstab = getval("gstab"),
g6bal= getval("g6bal"),
/* balance of the decoding gradient around last 180 pulse on 1H
g6bal=1.0 : full g6 is on the right side of the last pw180 on 1H
g6bal=0.0: full g6 is on the left side*/
gt0 = getval("gt0"),
gt1 = getval("gt1"),
gt2 = getval("gt2"),
gt3 = getval("gt3"),
gt4 = getval("gt4"),
gt5 = getval("gt5"),
gt6 = getval("gt6"),
gt7 = getval("gt7"),
gzlvl0 = getval("gzlvl0"),
gzlvl1 = getval("gzlvl1"),
gzlvl2 = getval("gzlvl2"),
gzlvl3 = getval("gzlvl3"),
gzlvl4 = getval("gzlvl4"),
gzlvl5 = getval("gzlvl5"),
gzlvl6 = getval("gzlvl6"),
gzlvl7 = getval("gzlvl7"),
gzlvl11 = getval("gzlvl11");
getstr("f1180",f1180);
getstr("f2180",f2180);
getstr("exp_mode",exp_mode);
tpwrs = tpwr - 20.0*log10(pwHs/(compH*pw*1.69)); /*needs 1.69 times more*/
tpwrs = (int) (tpwrs); /*power than a square pulse */
if (tpwrsf_d<4095.0)
tpwrs=tpwrs+6.0; /* add 6dB to let tpwrsf_d control fine power ~2048*/
/* LOAD PHASE TABLE */
settable(t1,1,phi1);
settable(t2,4,phi2); /* default double trosy */
if (exp_mode[A] == 'h') {settable(t2,4,phi2h);}; /*option for regular hNcaNH */
settable(t3,4,phi3);
settable(t4,8,phi4);
settable(t5,2,phi5);
settable(t6,4,phi6);
settable(t7,4,phi7);
settable(t8,4,phi8);
settable(t21,1,psi1); /*trosy and SE hsqc in reverse INPET */
settable(t22,1,psi2);
settable(t23,1,psi2c);
settable(t31,8,rec);
/* some checks */
if((dm2[A] == 'y') || (dm2[B] == 'y') || (dm2[C] == 'y') || (dm2[D] == 'y'))
{ text_error("incorrect dec2 decoupler flags! Should be 'nnnn' "); psg_abort(1); }
if ( dm3[A] == 'y' || dm3[C] == 'y' )
{ printf("incorrect dec3 decoupler flags! Should be 'nyn' or 'nnn' ");
psg_abort(1);}
if ( dpwr3 > 56 )
{ printf("dpwr3 too large! recheck value "); psg_abort(1);}
if ( (dm3[B] == 'y' ) && (timeCN*2.0 > 60.0e-3) )
{ printf("too lond time for 2H decoupling, SOL ");psg_abort(1);}
/* INITIALIZE VARIABLES */
if(FIRST_FID) /* call Pbox */
{
getstr("CA180_in_str",CA180_in_str); getstr("CA180n_in_str",CA180n_in_str);
getstr("CA90_in_str",CA90_in_str); getstr("CO180offCA_in_str",CO180offCA_in_str);
strcpy(RFpars, "-stepsize 0.5 -attn i");
CA180 = pbox("et_CA180_auto", CA180_in_str, RFpars, dfrq, compC*pwC, pwClvl);
CA180n = pbox("et_CA180n_auto", CA180n_in_str, RFpars, dfrq, compC*pwC, pwClvl);
CA90 = pbox("et_CA90_auto", CA90_in_str, RFpars, dfrq, compC*pwC, pwClvl);
CO180offCA = pbox("et_CO180offCA_auto", CO180offCA_in_str, RFpars, dfrq, compC*pwC, pwClvl);
};
/* Phase incrementation for hypercomplex 2D data, States-Haberkorn element */
/* t1 , N15 */
if (phase1 == 2) {tsadd(t2 ,1,4);}
if(d2_index % 2) {tsadd(t2,2,4); tsadd(t31,2,4); }
/* setting up semi-CT on t1 (ni) dimension */
tau1 = d2;
t1max=(ni-1.0)/sw1;
if((f1180[A] == 'y') && (ni > 0.0))
{tau1 += 0.5/sw1 ; t1max+= 0.5/sw1; }
if( t1max < timeTN1*2.0) {t1max=2.0*timeTN1;};
/* if not enough ni increments, then just regular CT in t1/ni CN */
/* t2, CA */
if (phase2 == 2) { tsadd(t3,1,4); }
if (d3_index % 2) { tsadd(t3,2,4); tsadd(t31,2,4); }
/* setup constant time in t2 (ni2) */
tau2 = d3;
t2max=2.0*(timeCN - CO180offCA.pw);
if((f2180[A] == 'y') && (ni2 > 0.0))
{tau2 += 0.5/sw2 ; t2max += 0.5/sw2 ;}
if(tau2 < 0.2e-6) {tau2 = 0.0;}
if ( (ni2-1.0)/sw2 > t2max)
{ text_error("too many ni2 increments in t2 ! "); psg_abort(1); }
if(FIRST_FID)
{
printf("t1max is %f\n",t1max);
printf("t2max is %f\n",t2max);
};
/* BEGIN PULSE SEQUENCE */
status(A);
obspower(tpwr);
decpower(pwClvl);
dec2power(pwNlvl);
txphase(zero);
decphase(zero);
dec2phase(zero);
delay(d1);
zgradpulse(gzlvl2, gt2);
delay(gstab*3.0);
if (exp_mode[B]=='n') dec2rgpulse(2.0*pwN, zero, 0.0, 0.0); /* test for steady-state 15N */
/* Hz -> HzXz INEPT */
rgpulse(pw,zero,rof1,rof1); /* 1H pulse excitation */
zgradpulse(gzlvl0, gt0);
delay(tauNH -gt0);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
delay(tauNH - gt0 -gstab);
zgradpulse(gzlvl0, gt0);
delay(gstab);
rgpulse(pw, t6, rof1, rof1);
/* on HzNz now */
/* water flipback*/
obspower(tpwrs); obspwrf(tpwrsf_u);
shaped_pulse("H2Osinc",pwHs,zero,rof1,rof1);
obspower(tpwr); obspwrf(4095.0);
/* purge */
zgradpulse(gzlvl3, gt3);
dec2phase(t2);
delay(gstab*2.0);
/* HzNz -> NzCAz +t1 evolution*/
dec2rgpulse(pwN, t2, 0.0, 0.0);
/* double-trosy hNcaNH */
delay(tauNH1 -pwHs-4.0*rof1 -pw
-2.0*POWER_DELAY -WFG_STOP_DELAY-WFG_START_DELAY);
obspower(tpwrs); obspwrf(tpwrsf_d);
shaped_pulse("H2Osinc",pwHs,two,rof1,rof1);
obspower(tpwr); obspwrf(4095.0);
rgpulse(pw, zero, rof1, rof1);
rgpulse(pw, t7, rof1, rof1);
obspower(tpwrs); obspwrf(tpwrsf_u);
shaped_pulse("H2Osinc",pwHs,t8,rof1,rof1);
obspower(tpwr); obspwrf(4095.0);
dec_c13_shpulse(CO180offCA,zero);
delay(tau1*0.5);
dec_c13_shpulse(CO180offCA,zero); dec2phase(zero);
delay( timeTN1 -tauNH1 -pwHs -4.0*rof1 -pw -2.0*POWER_DELAY
-WFG_STOP_DELAY -WFG_START_DELAY -CA180.pw -2.0*CO180offCA.pw
-3.0*(2.0*POWER_DELAY +WFG_STOP_DELAY +WFG_START_DELAY));
dec_c13_shpulse(CA180,zero);
delay(tau1*0.5 -timeTN1*tau1/t1max);
dec2rgpulse(2.0*pwN, zero, 0.0, 0.0);
delay( timeTN1 -tau1*timeTN1/t1max);
dec2rgpulse(pwN, zero, 0.0, 0.0);
/* on CAzNz now */
/* purge */
zgradpulse(gzlvl7, gt7);
delay(gstab);
if(dm3[B] == 'y')
{ dec3unblank();
if(1.0/dmf3>900.0e-6)
{
dec3power(dpwr3+6.0);
dec3rgpulse(0.5/dmf3, one, 1.0e-6, 0.0e-6);
dec3power(dpwr3);
}
else
dec3rgpulse(1.0/dmf3, one, 1.0e-6,0.0e-6);
dec3phase(zero);
setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
}
/* dec_c13_shpulse(CA90,t3);*/
/* t2 time, CA evolution */
decrgpulse(pwC,t3,0.0,0.0);
decphase(zero);
delay(0.5*(timeCN+tau2*0.5-CO180offCA.pw) );
dec_c13_shpulse(CO180offCA,zero);
delay(0.5*(timeCN+tau2*0.5-CO180offCA.pw) -pwN*2.0 + WFG_STOP_DELAY);
if (exp_mode[A]=='R') /* test CA.N relaxation rate */
{
delay(2.0*pwN);
}
else
dec2rgpulse(2.0*pwN, zero, 0.0, 0.0);
dec_c13_shpulse(CA180n,zero);
delay(0.5*(timeCN-tau2*0.5-CO180offCA.pw) );
dec_c13_shpulse(CO180offCA,zero);
delay(0.5*(timeCN-tau2*0.5-CO180offCA.pw) + WFG_START_DELAY);
/*dec_c13_shpulse(CA90,zero);*/
decrgpulse(pwC,zero,0.0,0.0);
if(dm3[B] == 'y')
{
setstatus(DEC3ch, FALSE, 'w', FALSE, dmf3);
if(1.0/dmf3>900.0e-6)
{
dec3power(dpwr3+6.0);
dec3rgpulse(0.5/dmf3, three, 1.0e-6, 0.0e-6);
dec3power(dpwr3);
}
else
dec3rgpulse(1.0/dmf3, three, 1.0e-6, 0.0e-6);
dec3blank();
delay(PRG_START_DELAY);
}
zgradpulse(gzlvl5, gt5);
dec2phase(t4);
delay(gstab);
/* CaN->N + back to NH */
dec2rgpulse(pwN, t4, 0.0, 0.0);
dec2phase(zero);
delay(timeTN);
dec2rgpulse(2.0*pwN, zero, 0.0, 0.0);
dec_c13_shpulse(CA180,zero);
delay(timeTN - CA180.pw -gt4-gstab -pwHs-3.0*rof1
-4.0*POWER_DELAY -2.0*WFG_STOP_DELAY-2.0*WFG_START_DELAY
-2.0*GRADIENT_DELAY
+4.0*pwN/3.1415-pw);
zgradpulse(gzlvl4, gt4);
delay(gstab);
/*Water flipback (flipdown actually ) */
obspower(tpwrs); obspwrf(tpwrsf_d);
shaped_pulse("H2Osinc",pwHs,three,rof1,rof1);
obspower(tpwr); obspwrf(4095.0);
/* reverse double INEPT */
/* 90 */
rgpulse(pw, t21, rof1, rof1);
zgradpulse(gzlvl11, gt1);
delay(tauNH -gt1 -rof1
-CA180.pw -2.0*POWER_DELAY - WFG_STOP_DELAY- WFG_START_DELAY );
dec_c13_shpulse(CA180,zero);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
delay(tauNH - gt1 -gstab);
zgradpulse(gzlvl11, gt1);
delay(gstab);
/* 90 */
sim3pulse(pw, 0.0, pwN, one, zero, zero, 0.0, 0.0);
zgradpulse(gzlvl1, gt1);
delay(tauNH -gt1);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
delay(tauNH -POWER_DELAY -gt1- gstab);
zgradpulse(gzlvl1, gt1);
dec2phase(t22);
delay(gstab);
sim3pulse(0.0,0.0, pwN, one, zero, t22, 0.0, 0.0);
zgradpulse(-(1.0-g6bal)*gzlvl6*icosel, gt6); /* 2.0*GRADIENT_DELAY */
delay( gstab -pwN*0.5 +pw*(2.0/3.1415-0.5) );
rgpulse(2.0*pw, zero, rof1, rof1);
dec2power(dpwr2); decpower(dpwr);
zgradpulse(g6bal*gzlvl6*icosel, gt6); /* 2.0*GRADIENT_DELAY */
delay(gstab +2.0*POWER_DELAY );
status(C);
setreceiver(t31);
}
pulsesequence()
{
/* DECLARE AND LOAD VARIABLES */
char f1180[MAXSTR], /* Flag to start t1 @ halfdwell */
f2180[MAXSTR], /* Flag to start t2 @ halfdwell */
mag_flg[MAXSTR], /* magic-angle coherence transfer gradients */
SCT[MAXSTR], /* Semi-constant time flag for N-15 evolution */
CT_c[MAXSTR], /* Constant time flag for C-13 evolution */
TROSY[MAXSTR]; /* do TROSY on N15 and H1 */
int icosel, /* used to get n and p type */
t1_counter, /* used for states tppi in t1 */
t2_counter, /* used for states tppi in t2 */
PRexp, /* projection-reconstruction flag */
ni2 = getval("ni2");
double tau1, /* t1 delay */
tau2, /* t2 delay */
tauC = getval("tauC"), /* delay for CO to Ca evolution */
timeTN = getval("timeTN"), /* constant time for 15N evolution */
timeTC = getval("timeTC"), /* constant time for 13C evolution */
t2a=0.0, t2b=0.0, halfT2=0.0, CTdelay=0.0,
kappa = 5.4e-3,
lambda = 2.4e-3,
pwClvl = getval("pwClvl"), /* coarse power for C13 pulse */
pwC = getval("pwC"), /* C13 90 degree pulse length at pwClvl */
rf0, /* maximum fine power when using pwC pulses */
/* 90 degree pulse at Ca (56ppm), first off-resonance null at CO (174ppm) */
pwC1, /* 90 degree pulse length on C13 at rf1 */
rf1, /* fine power for 4.7 kHz rf for 600MHz magnet */
/* 180 degree pulse at Ca (56ppm), first off-resonance null at CO(174ppm) */
pwC2, /* 180 degree pulse length at rf2 */
rf2, /* fine power for 10.5 kHz rf for 600MHz magnet */
/* the following pulse lengths for SLP pulses are automatically calculated */
/* by the macro "proteincal". SLP pulse shapes, "offC6" etc are called */
/* directly from your shapelib. */
pwC3 = getval("pwC3"), /*180 degree pulse at Ca(56ppm) null at CO(174ppm) */
pwC6 = getval("pwC6"), /* 90 degree selective sinc pulse on CO(174ppm) */
pwC8 = getval("pwC8"), /* 180 degree selective sinc pulse on CO(174ppm) */
pwC9 = getval("pwC9"), /* 180 degree selective sinc pulse on CO(174ppm) */
phshift9, /* phase shift induced on Ca by pwC9 ("offC9") pulse */
pwZ, /* the largest of pwC9 and 2.0*pwN */
pwZ1, /* the larger of pwC8 and 2.0*pwN for 1D experiments */
rf3, /* fine power for the pwC3 ("offC3") pulse */
rf6, /* fine power for the pwC6 ("offC6") pulse */
rf8, /* fine power for the pwC8 ("offC8") pulse */
rf9, /* fine power for the pwC9 ("offC9") pulse */
dofCO, /* channel 2 offset for most CO pulses */
compH = getval("compH"), /* adjustment for C13 amplifier compression */
compC = getval("compC"), /* adjustment for C13 amplifier compression */
pwHs = getval("pwHs"), /* H1 90 degree pulse length at tpwrs */
tpwrsf = getval("tpwrsf"), /* fine power adjustment for flipback */
tpwrs, /* power for the pwHs ("H2Osinc") pulse */
csa, sna,
pra = M_PI*getval("pra")/180.0,
pwHd, /* H1 90 degree pulse length at tpwrd */
tpwrd, /* rf for WALTZ decoupling */
waltzB1 = getval("waltzB1"), /* waltz16 field strength (in Hz) */
pwNlvl = getval("pwNlvl"), /* power for N15 pulses */
pwN = getval("pwN"), /* N15 90 degree pulse length at pwNlvl */
sw1 = getval("sw1"),
sw2 = getval("sw2"),
gt1 = getval("gt1"), /* coherence pathway gradients */
gzcal = getval("gzcal"), /* g/cm to DAC conversion factor */
gzlvl1 = getval("gzlvl1"),
gzlvl2 = getval("gzlvl2"),
gt0 = getval("gt0"), /* other gradients */
gt3 = getval("gt3"),
gt4 = getval("gt4"),
gt5 = getval("gt5"),
gt7 = getval("gt7"),
gt9 = getval("gt9"),
gt10 = getval("gt10"),
gstab = getval("gstab"),
gzlvl0 = getval("gzlvl0"),
gzlvl3 = getval("gzlvl3"),
gzlvl4 = getval("gzlvl4"),
gzlvl5 = getval("gzlvl5"),
gzlvl6 = getval("gzlvl6"),
gzlvl7 = getval("gzlvl7"),
gzlvl8 = getval("gzlvl8"),
gzlvl9 = getval("gzlvl9"),
gzlvl10 = getval("gzlvl10");
getstr("f1180",f1180);
getstr("f2180",f2180);
getstr("mag_flg",mag_flg);
getstr("SCT",SCT);
getstr("CT_c",CT_c);
getstr("TROSY",TROSY);
/* LOAD PHASE TABLE */
settable(t3,2,phi3);
settable(t4,1,phx);
settable(t5,4,phi5);
if (TROSY[A]=='y')
{settable(t8,1,phy);
settable(t9,1,phx);
settable(t10,1,phy);
settable(t11,1,phx);
settable(t12,4,recT);}
else
{settable(t8,1,phx);
settable(t9,8,phi9);
settable(t10,1,phx);
settable(t11,1,phy);
settable(t12,4,rec);}
/* INITIALIZE VARIABLES */
if( dpwrf < 4095 )
{ printf("reset dpwrf=4095 and recalibrate C13 90 degree pulse");
psg_abort(1); }
/* offset during CO pulses, except for t1 evolution period */
dofCO = dof + 118.0*dfrq;
/* maximum fine power for pwC pulses */
rf0 = 4095.0;
/* 90 degree pulse on Ca, null at CO 118ppm away */
pwC1 = sqrt(15.0)/(4.0*118.0*dfrq);
rf1 = 4095.0*(compC*pwC)/pwC1;
rf1 = (int) (rf1 + 0.5);
/* 180 degree pulse on Ca, null at CO 118ppm away */
pwC2 = sqrt(3.0)/(2.0*118.0*dfrq);
rf2 = (compC*4095.0*pwC*2.0)/pwC2;
rf2 = (int) (rf2 + 0.5);
if( rf2 > 4095.0 )
{ printf("increase pwClvl so that C13 90 < 24us*(600/sfrq)"); psg_abort(1);}
/* 180 degree pulse on Ca, null at CO 118ppm away */
rf3 = (compC*4095.0*pwC*2.0)/pwC3;
rf3 = (int) (rf3 + 0.5);
/* 90 degree one-lobe sinc pulse on CO, null at Ca 118ppm away */
rf6 = (compC*4095.0*pwC*1.69)/pwC6; /* needs 1.69 times more */
rf6 = (int) (rf6 + 0.5); /* power than a square pulse */
/* 180 degree one-lobe sinc pulse on CO, null at Ca 118ppm away */
rf8 = (compC*4095.0*pwC*2.0*1.65)/pwC8; /* needs 1.65 times more */
rf8 = (int) (rf8 + 0.5); /* power than a square pulse */
/* 180 degree one-lobe sinc pulse on CO, null at Ca 118ppm away */
rf9 = (compC*4095.0*pwC*2.0*1.65)/pwC8; /* needs 1.65 times more */
rf9 = (int) (rf9 + 0.5); /* power than a square pulse */
/* the pwC9 pulse at the middle of t1 */
if ((ni2 > 0.0) && (ni == 1.0)) ni = 0.0;
if (pwC8 > 2.0*pwN) pwZ = pwC8; else pwZ = 2.0*pwN;
if ((pwC9==0.0) && (pwC8>2.0*pwN)) pwZ1=pwC8-2.0*pwN; else pwZ1=0.0;
if ( ni > 1 ) pwC9 = pwC8;
if ( pwC9 > 0 ) phshift9 = 140.0;
else phshift9 = 0.0;
/* selective H20 one-lobe sinc pulse */
tpwrs = tpwr - 20.0*log10(pwHs/(compH*pw*1.69)); /* needs 1.69 times more */
tpwrs = (int) (tpwrs); /* power than a square pulse */
/* power level and pulse time for WALTZ 1H decoupling */
pwHd = 1/(4.0 * waltzB1) ; /* 7.5 kHz rf */
tpwrd = tpwr - 20.0*log10(pwHd/(compH*pw));
tpwrd = (int) (tpwrd + 0.5);
/* set up Projection-Reconstruction experiment */
tau1 = d2; tau2 = d3;
PRexp=0; csa = 1.0; sna = 0.0;
if((pra > 0.0) && (pra < 90.0)) /* PR experiments */
{
PRexp = 1;
csa = cos(pra);
sna = sin(pra);
tau1 = d2*csa;
tau2 = d2*sna;
}
/* CHECK VALIDITY OF PARAMETER RANGES */
if(SCT[A] == 'n')
{
if (PRexp)
{
if( 0.5*ni*sna/sw1 > timeTN - WFG3_START_DELAY)
{ printf(" ni is too big. Make ni equal to %d or less.\n",
((int)((timeTN - WFG3_START_DELAY)*2.0*sw1/sna))); psg_abort(1);}
}
else
{
if ( 0.5*ni2*1/(sw2) > timeTN - WFG3_START_DELAY)
{ printf(" ni2 is too big. Make ni2 equal to %d or less.\n",
((int)((timeTN - WFG3_START_DELAY)*2.0*sw2))); psg_abort(1);}
}
}
if(CT_c[A] == 'y')
{
if ( 0.5*ni*csa/sw1 > timeTC)
{ printf(" ni is too big. Make ni less than %d or less.\n",
((int)(timeTC*2.0*sw1/csa - 4e-6 - SAPS_DELAY))); psg_abort(1);}
}
if ( tauC < (gt7+1.0e-4+0.5*10.933*pwC)) gt7=(tauC-1.0e-4-0.5*10.933*pwC);
if ( dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y' )
{ printf("incorrect dec1 decoupler flags! Should be 'nnn' "); psg_abort(1);}
if ( dm2[A] == 'y' || dm2[B] == 'y' )
{ printf("incorrect dec2 decoupler flags! Should be 'nny' "); psg_abort(1);}
if ( dm3[A] == 'y' || dm3[C] == 'y' )
{ printf("incorrect dec3 decoupler flags! Should be 'nyn' or 'nnn' ");
psg_abort(1);}
if ( dpwr2 > 50 )
{ printf("dpwr2 too large! recheck value "); psg_abort(1);}
if ( pw > 20.0e-6 )
{ printf(" pw too long ! recheck value "); psg_abort(1);}
if ( pwN > 100.0e-6 )
{ printf(" pwN too long! recheck value "); psg_abort(1);}
if ( TROSY[A]=='y' && dm2[C] == 'y')
{ text_error("Choose either TROSY='n' or dm2='n' ! "); psg_abort(1);}
/* PHASES AND INCREMENTED TIMES */
/* Phase incrementation for hypercomplex 2D data, States-Haberkorn element */
if (phase1 == 2) tsadd(t3,1,4);
if (TROSY[A]=='y')
{ if (phase2 == 2) icosel = +1;
else {tsadd(t4,2,4); tsadd(t10,2,4); icosel = -1;}
}
else { if (phase2 == 2) {tsadd(t10,2,4); icosel = +1;}
else icosel = -1;
}
/* Calculate modifications to phases for States-TPPI acquisition */
if( ix == 1) d2_init = d2;
t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
if(t1_counter % 2)
{ tsadd(t3,2,4); tsadd(t12,2,4); }
if( ix == 1) d3_init = d3;
t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
if(t2_counter % 2)
{ tsadd(t8,2,4); tsadd(t12,2,4); }
/* Set up CONSTANT/SEMI-CONSTANT time evolution in N15 */
halfT2 = 0.0;
CTdelay = timeTN + pwC8 + WFG_START_DELAY - SAPS_DELAY;
if(ni>1)
{
if(f1180[A] == 'y') /* Set up f1180 */
tau1 += 0.5*csa/sw1; /* if not PRexp then csa = 1.0 */
if(PRexp)
{
halfT2 = 0.5*(ni-1)/sw1; /* ni2 is not defined */
if(f1180[A] == 'y')
{ tau2 += 0.5*sna/sw1; halfT2 += 0.25*sna/sw1; }
t2b = (double) t1_counter*((halfT2 - CTdelay)/((double)(ni-1)));
}
}
if (ni2>1)
{
halfT2 = 0.5*(ni2-1)/sw2;
if(f2180[A] == 'y') /* Set up f2180 */
{ tau2 += 0.5/sw2; halfT2 += 0.25/sw2; }
t2b = (double) t2_counter*((halfT2 - CTdelay)/((double)(ni2-1)));
}
tau1 = tau1/2.0;
tau2 = tau2/2.0;
if(tau1 < 0.2e-6) tau1 = 0.0;
if(tau2 < 0.2e-6) tau2 = 0.0;
if(t2b < 0.0) t2b = 0.0;
t2a = CTdelay - tau2 + t2b;
if(t2a < 0.2e-6) t2a = 0.0;
/* uncomment these lines to check t2a and t2b
printf("%d: t2a = %.12f", t2_counter,t2a);
printf(" ; t2b = %.12f\n", t2b);
*/
/* BEGIN PULSE SEQUENCE */
status(A);
delay(d1);
if ( dm3[B] == 'y' )
{ lk_hold(); lk_sampling_off();} /*freezes z0 correction, stops lock pulsing*/
rcvroff();
obspower(tpwr);
decpower(pwClvl);
dec2power(pwNlvl);
decpwrf(rf0);
obsoffset(tof);
decoffset(dofCO);
txphase(zero);
delay(1.0e-5);
if (TROSY[A] == 'n')
dec2rgpulse(pwN, zero, 0.0, 0.0); /*destroy N15 and C13 magnetization*/
decrgpulse(pwC, zero, 0.0, 0.0);
zgradpulse(-gzlvl0, 0.5e-3);
delay(1.0e-4);
if (TROSY[A] == 'n')
dec2rgpulse(pwN, one, 0.0, 0.0);
decrgpulse(pwC, zero, 0.0, 0.0);
zgradpulse(-0.7*gzlvl0, 0.5e-3);
delay(5.0e-4);
rgpulse(pw, zero, 0.0, 0.0); /* 1H pulse excitation */
dec2phase(zero);
zgradpulse(gzlvl0, gt0);
delay(lambda - gt0);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
txphase(one);
zgradpulse(gzlvl0, gt0);
delay(lambda - gt0);
rgpulse(pw, one, 0.0, 0.0);
if (tpwrsf < 4095.0)
{obspwrf(tpwrsf);
obspower(tpwrs+6.0);} /* increases tpwrs by 6dB, now need */
else
obspower(tpwrs);
/* tpwrsf to be ~ 2048 for equivalence */
if (TROSY[A]=='y')
{txphase(two);
shaped_pulse("H2Osinc", pwHs, two, 5.0e-4, 0.0);
obspower(tpwr); obspwrf(4095.0);
zgradpulse(gzlvl3, gt3);
delay(2.0e-4);
dec2rgpulse(pwN, zero, 0.0, 0.0);
delay(0.5*kappa - 2.0*pw);
rgpulse(2.0*pw, two, 0.0, 0.0);
obspower(tpwrd); /* POWER_DELAY */
decphase(zero);
dec2phase(zero);
decpwrf(rf8);
delay(timeTN -0.5*kappa - POWER_DELAY - WFG3_START_DELAY);
}
else
{txphase(zero);
if (tpwrsf < 4095.0)
{obspwrf(tpwrsf);
obspower(tpwrs+6.0);} /* increases tpwrs by 6dB, now need */
else
obspower(tpwrs);
/* tpwrsf to be ~ 2048 for equivalence */
shaped_pulse("H2Osinc",pwHs,zero,5.0e-4,0.0);
obspower(tpwrd); obspwrf(4095.0);
zgradpulse(gzlvl3, gt3);
delay(2.0e-4);
dec2rgpulse(pwN, zero, 0.0, 0.0);
txphase(one);
delay(kappa - pwHd - 2.0e-6 - PRG_START_DELAY);
rgpulse(pwHd,one,0.0,0.0);
txphase(zero);
delay(2.0e-6);
obsprgon("waltz16", pwHd, 90.0); /* PRG_START_DELAY */
xmtron();
decphase(zero);
dec2phase(zero);
decpwrf(rf8);
delay(timeTN - kappa - WFG3_START_DELAY);
}
/* WFG3_START_DELAY */
sim3shaped_pulse("", "offC8", "", 0.0, pwC8, 2.0*pwN, zero, zero, zero,
0.0, 0.0);
decphase(zero);
decpwrf(rf6);
delay(timeTN);
dec2rgpulse(pwN, zero, 0.0, 0.0);
if (TROSY[A]=='n')
{xmtroff();
obsprgoff();
rgpulse(pwHd,three,2.0e-6,0.0);}
zgradpulse(-gzlvl3, gt3);
delay(2.0e-4);
decshaped_pulse("offC6", pwC6, zero, 0.0, 0.0);
zgradpulse(-gzlvl7, gt7);
decpwrf(rf0);
decphase(zero);
delay(tauC - gt7 - 0.5*10.933*pwC);
decrgpulse(pwC*158.0/90.0, zero, 0.0, 0.0);
decrgpulse(pwC*171.2/90.0, two, 0.0, 0.0);
decrgpulse(pwC*342.8/90.0, zero, 0.0, 0.0); /* Shaka 6 composite */
decrgpulse(pwC*145.5/90.0, two, 0.0, 0.0);
decrgpulse(pwC*81.2/90.0, zero, 0.0, 0.0);
decrgpulse(pwC*85.3/90.0, two, 0.0, 0.0);
zgradpulse(-gzlvl7, gt7);
decpwrf(rf6);
decphase(one);
txphase(one);
delay(tauC - gt7 - 0.5*10.933*pwC - WFG_START_DELAY);
/* WFG_START_DELAY */
decshaped_pulse("offC6", pwC6, one, 0.0, 0.0);
decoffset(dof);
zgradpulse(-gzlvl9, gt9);
decpwrf(rf1);
decphase(t3);
delay(2.0e-4);
if ( dm3[B] == 'y' ) /* begins optional 2H decoupling */
{
dec3rgpulse(1/dmf3,one,10.0e-6,2.0e-6);
dec3unblank();
dec3phase(zero);
delay(2.0e-6);
setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
}
rgpulse(pwHd,one,0.0,0.0);
txphase(zero);
delay(2.0e-6);
obsprgon("waltz16", pwHd, 90.0);
xmtron();
decrgpulse(pwC1, t3, 0.0, 0.0);
decphase(zero);
/* xxxxxxxxxxxxxxxxxxxxxx 13Ca EVOLUTION xxxxxxxxxxxxxxxxxx */
if (ni==1.0) /* special 1D check of pwC9 phase enabled when ni=1 */
{
decpwrf(rf9);
delay(10.0e-6 + SAPS_DELAY + 0.5*pwZ1);
/* WFG3_START_DELAY */
sim3shaped_pulse("", "offC9", "", 0.0, pwC9, 2.0*pwN, zero, zero, zero,
2.0e-6, 0.0);
initval(phshift9, v9);
decstepsize(1.0);
dcplrphase(v9); /* SAPS_DELAY */
delay(10.0e-6 + WFG3_START_DELAY + 0.5*pwZ1);
}
else if(CT_c[A] == 'y') /* xxxxxxx 13Ca Constant Time EVOLUTION xxxxxxxx */
{
decpwrf(rf9);
if(tau1 - 2.0*pwC1/PI - WFG_START_DELAY -POWER_DELAY > 0.0) {
delay(tau1 -2.0*pwC1/PI -POWER_DELAY -WFG_START_DELAY);
sim3shaped_pulse("","offC9","",0.0,pwC8, 2.0*pwN, zero, zero, zero,
0.0, 0.0);
}
else
sim3shaped_pulse("","offC9","",0.0,pwC8, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
delay(timeTC- 2.0e-6 -WFG_STOP_DELAY-POWER_DELAY);
decpwrf(rf2);
decrgpulse(pwC2, zero, 2.0e-6, 2.0e-6); /* 13Ca 180 degree pulse */
delay(timeTC-tau1- 4.0e-6 -SAPS_DELAY);
phshift9 = 230.0; /* = 320-90 - correction for -90 degree phase shift in F1 */
initval(phshift9, v9);
decstepsize(1.0);
dcplrphase(v9); /* SAPS_DELAY */
}
else /* xxxxxxx 13Ca Conventional EVOLUTION xxxxxxxxx */
{
if ((ni>1.0) && (tau1>0.0)) /* total 13C evolution equals d2 exactly */
{ /* 2.0*pwC1/PI compensates for evolution at 64% rate during pwC1 */
decpwrf(rf9);
if(tau1 - 2.0*pwC1/PI - WFG3_START_DELAY - 0.5*pwZ > 0.0)
{
delay(tau1 - 2.0*pwC1/PI - WFG3_START_DELAY - 0.5*pwZ);
sim3shaped_pulse("", "offC9", "", 0.0, pwC8, 2.0*pwN, zero, zero, zero,
0.0, 0.0);
initval(phshift9, v9);
decstepsize(1.0);
dcplrphase(v9); /* SAPS_DELAY */
delay(tau1 - 2.0*pwC1/PI - SAPS_DELAY - 0.5*pwZ - 2.0e-6);
}
else
{
initval(180.0, v9);
decstepsize(1.0);
dcplrphase(v9); /* SAPS_DELAY */
delay(2.0*tau1 - 4.0*pwC1/PI - SAPS_DELAY - 2.0e-6);
}
}
else /* 13Ca evolution refocused for 1st increment */
{
decpwrf(rf2);
delay(10.0e-6);
decrgpulse(pwC2, zero, 2.0e-6, 0.0);
delay(10.0e-6);
}
}
decphase(t5);
decpwrf(rf1);
decrgpulse(pwC1, t5, 2.0e-6, 0.0);
/* xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx */
xmtroff();
obsprgoff();
rgpulse(pwHd,three,2.0e-6,0.0);
decoffset(dofCO);
decpwrf(rf6);
decphase(one);
if ( dm3[B] == 'y' ) /* turns off 2H decoupling */
{
setstatus(DEC3ch, FALSE, 'c', FALSE, dmf3);
dec3rgpulse(1/dmf3,three,2.0e-6,2.0e-6);
dec3blank();
lk_autotrig(); /* resumes lock pulsing */
}
zgradpulse(gzlvl10, gt10);
delay(2.0e-4);
decshaped_pulse("offC6", pwC6, one, 0.0, 0.0);
zgradpulse(gzlvl8, gt7);
decpwrf(rf0);
decphase(zero);
delay(tauC - gt7 - 0.5*10.933*pwC);
decrgpulse(pwC*158.0/90.0, zero, 0.0, 0.0);
decrgpulse(pwC*171.2/90.0, two, 0.0, 0.0);
decrgpulse(pwC*342.8/90.0, zero, 0.0, 0.0); /* Shaka 6 composite */
decrgpulse(pwC*145.5/90.0, two, 0.0, 0.0);
decrgpulse(pwC*81.2/90.0, zero, 0.0, 0.0);
decrgpulse(pwC*85.3/90.0, two, 0.0, 0.0);
zgradpulse(gzlvl8, gt7);
decpwrf(rf6);
decphase(zero);
delay(tauC - gt7 - 0.5*10.933*pwC - WFG_START_DELAY);
/* WFG_START_DELAY */
decshaped_pulse("offC6", pwC6, zero, 0.0, 0.0);
/* xxxxxxxxxxxxxxxxxx OPTIONS FOR N15 EVOLUTION xxxxxxxxxxxxxxxxxxxxx */
zgradpulse(gzlvl4, gt4);
txphase(one);
decphase(zero);
decpwrf(rf8);
dcplrphase(zero);
dec2phase(t8);
delay(2.0e-4);
if (TROSY[A]=='n')
{rgpulse(pwHd,one,0.0,0.0);
txphase(zero);
delay(2.0e-6);
obsprgon("waltz16", pwHd, 90.0);
xmtron();}
dec2rgpulse(pwN, t8, 0.0, 0.0); /* N15 EVOLUTION BEGINS HERE */
dec2phase(t9);
if(SCT[A] == 'y')
{
delay(t2a);
dec2rgpulse(2.0*pwN, t9, 0.0, 0.0);
delay(t2b);
decshaped_pulse("offC8", pwC8, zero, 0.0, 0.0); /* WFG_START_DELAY */
}
else
{
delay(timeTN - WFG3_START_DELAY - tau2); /* WFG3_START_DELAY */
sim3shaped_pulse("", "offC8", "", 0.0, pwC8, 2.0*pwN, zero, zero, t9,
0.0, 0.0);
}
dec2phase(t10);
decpwrf(rf3);
if (TROSY[A]=='y')
{ if (tau2 > gt1 + 2.0*GRADIENT_DELAY + 1.5e-4 + pwHs)
{
txphase(three);
delay(timeTN - pwC3 - WFG_START_DELAY); /* WFG_START_DELAY */
decshaped_pulse("offC3", pwC3, zero, 0.0, 0.0);
delay(tau2 - gt1 - 2.0*GRADIENT_DELAY - 1.5e-4 - pwHs);
if (mag_flg[A]=='y') magradpulse(gzcal*gzlvl1, gt1);
else zgradpulse(gzlvl1, gt1); /* 2.0*GRADIENT_DELAY */
obspower(tpwrs); /* POWER_DELAY */
delay(1.0e-4 - POWER_DELAY);
if (tpwrsf < 4095.0)
{obspwrf(tpwrsf);
obspower(tpwrs+6.0);} /* increases tpwrs by 6dB, now need */
else
obspower(tpwrs);
/* tpwrsf to be ~ 2048 for equivalence */
shaped_pulse("H2Osinc", pwHs, three, 0.0, 0.0);
obspower(tpwr); obspwrf(4095.0);
txphase(t4);
delay(0.5e-4 - POWER_DELAY);
}
else if (tau2 > pwHs + 0.5e-4)
{
txphase(three);
delay(timeTN-pwC3-WFG_START_DELAY-gt1-2.0*GRADIENT_DELAY-1.0e-4);
if (mag_flg[A]=='y') magradpulse(gzcal*gzlvl1, gt1);
else zgradpulse(gzlvl1, gt1); /* 2.0*GRADIENT_DELAY */
obspower(tpwrs); /* POWER_DELAY */
delay(1.0e-4 - POWER_DELAY); /* WFG_START_DELAY */
decshaped_pulse("offC3", pwC3, zero, 0.0, 0.0);
delay(tau2 - pwHs - 0.5e-4);
if (tpwrsf < 4095.0)
{obspwrf(tpwrsf);
obspower(tpwrs+6.0);} /* increases tpwrs by 6dB, now need */
else
obspower(tpwrs);
/* tpwrsf to be ~ 2048 for equivalence */
shaped_pulse("H2Osinc", pwHs, three, 0.0, 0.0);
obspower(tpwr); obspwrf(4095.0);
txphase(t4);
delay(0.5e-4 - POWER_DELAY);
}
else
{
txphase(three);
delay(timeTN - pwC3 - WFG_START_DELAY - gt1 - 2.0*GRADIENT_DELAY
- 1.5e-4 - pwHs);
if (mag_flg[A]=='y') magradpulse(gzcal*gzlvl1, gt1);
else zgradpulse(gzlvl1, gt1); /* 2.0*GRADIENT_DELAY */
obspower(tpwrs); /* POWER_DELAY */
delay(1.0e-4 - POWER_DELAY); /* WFG_START_DELAY */
if (tpwrsf < 4095.0)
{obspwrf(tpwrsf);
obspower(tpwrs+6.0);} /* increases tpwrs by 6dB, now need */
else
obspower(tpwrs);
/* tpwrsf to be ~ 2048 for equivalence */
shaped_pulse("H2Osinc", pwHs, three, 0.0, 0.0);
obspower(tpwr); obspwrf(4095.0);
txphase(t4);
delay(0.5e-4 - POWER_DELAY);
decshaped_pulse("offC3", pwC3, zero, 0.0, 0.0);
delay(tau2);
}
}
else
{
if (tau2 > kappa)
{
delay(timeTN - pwC3 - WFG_START_DELAY); /* WFG_START_DELAY */
decshaped_pulse("offC3", pwC3, zero, 0.0, 0.0);
delay(tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
xmtroff();
obsprgoff(); /* PRG_STOP_DELAY */
rgpulse(pwHd,three,2.0e-6,0.0);
txphase(t4);
delay(kappa - gt1 - 2.0*GRADIENT_DELAY - 1.0e-4);
if (mag_flg[A]=='y') magradpulse(gzcal*gzlvl1, gt1);
else zgradpulse(gzlvl1, gt1); /* 2.0*GRADIENT_DELAY */
obspower(tpwr); /* POWER_DELAY */
delay(1.0e-4 - POWER_DELAY);
}
else if (tau2 > (kappa - pwC3 - WFG_START_DELAY))
{
delay(timeTN + tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
xmtroff();
obsprgoff(); /* PRG_STOP_DELAY */
rgpulse(pwHd,three,2.0e-6,0.0);
txphase(t4); /* WFG_START_DELAY */
decshaped_pulse("offC3", pwC3, zero, 0.0, 0.0);
delay(kappa -pwC3 -WFG_START_DELAY -gt1 -2.0*GRADIENT_DELAY -1.0e-4);
if (mag_flg[A]=='y') magradpulse(gzcal*gzlvl1, gt1);
else zgradpulse(gzlvl1, gt1); /* 2.0*GRADIENT_DELAY */
obspower(tpwr); /* POWER_DELAY */
delay(1.0e-4 - POWER_DELAY);
}
else if (tau2 > gt1 + 2.0*GRADIENT_DELAY + 1.0e-4)
{
delay(timeTN + tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
xmtroff();
obsprgoff(); /* PRG_STOP_DELAY */
rgpulse(pwHd,three,2.0e-6,0.0);
txphase(t4);
delay(kappa - tau2 - pwC3 - WFG_START_DELAY); /* WFG_START_DELAY */
decshaped_pulse("offC3", pwC3, zero, 0.0, 0.0);
delay(tau2 - gt1 - 2.0*GRADIENT_DELAY - 1.0e-4);
if (mag_flg[A]=='y') magradpulse(gzcal*gzlvl1, gt1);
else zgradpulse(gzlvl1, gt1); /* 2.0*GRADIENT_DELAY */
obspower(tpwr); /* POWER_DELAY */
delay(1.0e-4 - POWER_DELAY);
}
else
{
delay(timeTN + tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
xmtroff();
obsprgoff(); /* PRG_STOP_DELAY */
rgpulse(pwHd,three,2.0e-6,0.0);
txphase(t4);
delay(kappa-tau2-pwC3-WFG_START_DELAY-gt1-2.0*GRADIENT_DELAY-1.0e-4);
if (mag_flg[A]=='y') magradpulse(gzcal*gzlvl1, gt1);
else zgradpulse(gzlvl1, gt1); /* 2.0*GRADIENT_DELAY */
obspower(tpwr); /* POWER_DELAY */
delay(1.0e-4 - POWER_DELAY); /* WFG_START_DELAY */
decshaped_pulse("offC3", pwC3, zero, 0.0, 0.0);
delay(tau2);
}
}
/* xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx */
if (TROSY[A]=='y') rgpulse(pw, t4, 0.0, 0.0);
else sim3pulse(pw, 0.0, pwN, t4, zero, t10, 0.0, 0.0);
txphase(zero);
dec2phase(zero);
zgradpulse(gzlvl5, gt5);
if (TROSY[A]=='y') delay(lambda - 0.65*(pw + pwN) - gt5);
else delay(lambda - 1.3*pwN - gt5);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
zgradpulse(gzlvl5, gt5);
txphase(one);
dec2phase(t11);
delay(lambda - 1.3*pwN - gt5);
sim3pulse(pw, 0.0, pwN, one, zero, t11, 0.0, 0.0);
txphase(zero);
dec2phase(zero);
zgradpulse(gzlvl6, gt5);
delay(lambda - 1.3*pwN - gt5);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
dec2phase(t10);
zgradpulse(gzlvl6, gt5);
if (TROSY[A]=='y') delay(lambda - 1.6*pwN - gt5);
else delay(lambda - 0.65*pwN - gt5);
if (TROSY[A]=='y') dec2rgpulse(pwN, t10, 0.0, 0.0);
else rgpulse(pw, zero, 0.0, 0.0);
delay((gt1/10.0) + 1.0e-4 +gstab - 0.5*pw + 2.0*GRADIENT_DELAY + POWER_DELAY);
rgpulse(2.0*pw, zero, 0.0,rof1);
dec2power(dpwr2); /* POWER_DELAY */
if (mag_flg[A] == 'y') magradpulse(icosel*gzcal*gzlvl2, gt1/10.0);
else zgradpulse(icosel*gzlvl2, gt1/10.0); /* 2.0*GRADIENT_DELAY */
delay(gstab);
rcvron();
statusdelay(C,1.0e-4 - rof1);
if (dm3[B]=='y') lk_sample();
setreceiver(t12);
}
pulsesequence()
{
/* DECLARE VARIABLES */
char autocal[MAXSTR], /* auto-calibration flag */
fsat[MAXSTR],
fscuba[MAXSTR],
f1180[MAXSTR], /* Flag to start t1 @ halfdwell */
f2180[MAXSTR], /* Flag to start t2 @ halfdwell */
f3180[MAXSTR], /* Flag to start t3 @ halfdwell */
fco180[MAXSTR], /* Flag for checking sequence */
fca180[MAXSTR], /* Flag for checking sequence */
spca180[MAXSTR], /* string for the waveform Ca 180 */
spco180[MAXSTR], /* string for the waveform Co 180 */
spchirp[MAXSTR], /* string for the waveform reburp 180 */
ddseq[MAXSTR], /* 2H decoupling seqfile */
shp_sl[MAXSTR], /* string for seduce shape */
sel_flg[MAXSTR];
int phase, phase2, phase3, ni2, ni3, icosel,
t1_counter, /* used for states tppi in t1 */
t2_counter, /* used for states tppi in t2 */
t3_counter; /* used for states tppi in t3 */
double tau1, /* t1 delay */
tau2, /* t2 delay */
tau3, /* t2 delay */
taua, /* ~ 1/4JNH = 2.25 ms */
taub, /* ~ 1/4JNH = 2.25 ms */
zeta, /* time for C'-N to refocuss set to 0.5*24.0 ms */
bigTN, /* nitrogen T period */
pwc90, /* PW90 for c nucleus @ d_c90 */
pwc180on, /* PW180 at @ d_c180 */
pwchirp, /* PW180 for ca nucleus @ d_creb */
pwc180off, /* PW180 at d_c180 + pad */
tsatpwr, /* low level 1H trans.power for presat */
d_c90, /* power level for 13C pulses(pwc90 = sqrt(15)/4delta)
delta is the separation between Ca and Co */
d_c180, /* power level for 180 13C pulses
(pwc180on=sqrt(3)/2delta */
d_chirp,
sw1, /* sweep width in f1 */
sw2, /* sweep width in f2 */
sw3, /* sweep width in f3 */
pw_sl, /* pw90 for H selective pulse on water ~ 2ms */
phase_sl, /* phase for pw_sl */
tpwrsl, /* power level for square pw_sl */
pwDlvl, /* Power for D decoupling */
pwD, /* pw90 at pwDlvl */
pwC, pwClvl, /* C-13 calibration */
compC,
pwN, /* PW90 for 15N pulse */
pwNlvl, /* high dec2 pwr for 15N hard pulses */
gstab, /* delay to compensate for gradient gt5 */
gt1,
gt2,
gt3,
gt4,
gt5,
gt6,
gt7,
gt8,
gt9,
gzlvl1,
gzlvl2,
gzlvl3,
gzlvl4,
gzlvl5,
gzlvl6,
gzlvl7,
gzlvl8,
gzlvl9;
/* LOAD VARIABLES */
getstr("autocal",autocal);
getstr("fsat",fsat);
getstr("fco180",fco180);
getstr("fca180",fca180);
getstr("f1180",f1180);
getstr("f2180",f2180);
getstr("f3180",f3180);
getstr("fscuba",fscuba);
getstr("ddseq",ddseq);
getstr("shp_sl",shp_sl);
getstr("sel_flg",sel_flg);
taua = getval("taua");
taub = getval("taub");
zeta = getval("zeta");
bigTN = getval("bigTN");
tpwr = getval("tpwr");
tsatpwr = getval("tsatpwr");
dpwr = getval("dpwr");
pwN = getval("pwN");
pwNlvl = getval("pwNlvl");
pwD = getval("pwD");
pwDlvl = getval("pwDlvl");
phase = (int) ( getval("phase") + 0.5);
phase2 = (int) ( getval("phase2") + 0.5);
phase3 = (int) ( getval("phase3") + 0.5);
sw1 = getval("sw1");
sw2 = getval("sw2");
sw3 = getval("sw3");
ni2 = getval("ni2");
ni3 = getval("ni3");
pw_sl = getval("pw_sl");
phase_sl = getval("phase_sl");
tpwrsl = getval("tpwrsl");
gstab = getval("gstab");
gt1 = getval("gt1");
if (getval("gt2") > 0) gt2=getval("gt2");
else gt2=gt1*0.1;
gt3 = getval("gt3");
gt4 = getval("gt4");
gt5 = getval("gt5");
gt6 = getval("gt6");
gt7 = getval("gt7");
gt8 = getval("gt8");
gt9 = getval("gt9");
gzlvl1 = getval("gzlvl1");
gzlvl2 = getval("gzlvl2");
gzlvl3 = getval("gzlvl3");
gzlvl4 = getval("gzlvl4");
gzlvl5 = getval("gzlvl5");
gzlvl6 = getval("gzlvl6");
gzlvl7 = getval("gzlvl7");
gzlvl8 = getval("gzlvl8");
gzlvl9 = getval("gzlvl9");
if(autocal[0]=='n')
{
getstr("spca180",spca180);
getstr("spco180",spco180);
getstr("spchirp",spchirp);
pwc90 = getval("pwc90");
pwc180on = getval("pwc180on");
pwc180off = getval("pwc180off");
d_c90 = getval("d_c90");
d_c180 = getval("d_c180");
pwchirp = getval("pwchirp");
d_chirp = getval("d_chirp");
}
else
{
strcpy(spca180,"Phard180ca");
strcpy(spco180,"Phard180co");
strcpy(spchirp,"Pchirp180");
if (FIRST_FID)
{
pwC = getval("pwC");
compC = getval("compC");
pwClvl = getval("pwClvl");
co90 = pbox("cal", CO90, CO180ps, dfrq, pwC*compC, pwClvl);
co180 = pbox("cal", CO180, CO180ps, dfrq, pwC*compC, pwClvl);
ca180 = pbox(spca180, CA180, CA180ps, dfrq, pwC*compC, pwClvl);
co180a = pbox(spco180, CO180a, CA180ps, dfrq, pwC*compC, pwClvl);
chirp = pbox(spchirp, CHIRP, CHIRPps, dfrq, pwC*compC, pwClvl);
}
pwc90 = co90.pw; d_c90 = co90.pwr;
pwc180on = co180.pw; d_c180 = co180.pwr;
pwc180off = ca180.pw;
pwchirp = chirp.pw; d_chirp = chirp.pwr;
}
/* LOAD PHASE TABLE */
settable(t1,2,phi1);
settable(t2,2,phi2);
settable(t3,4,phi3);
settable(t4,1,phi4);
settable(t5,4,phi5);
settable(t6,4,rec);
/* CHECK VALIDITY OF PARAMETER RANGES */
if( bigTN - (ni3-1)*0.5/sw3 - WFG3_START_DELAY < 0.2e-6 )
{
text_error(" ni3 is too big\n");
text_error(" please set ni3 smaller or equal to %d\n",
(int) ((bigTN -WFG3_START_DELAY)*sw3*2.0) +1 );
psg_abort(1);
}
if((dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y' || dm[D] == 'y' ))
{
text_error("incorrect dec1 decoupler flags! ");
psg_abort(1);
}
if((dm2[A] == 'y' || dm2[B] == 'y' || dm2[C] == 'y' || dm2[D] == 'y'))
{
text_error("incorrect dec2 decoupler flags! Should be 'nnnn' ");
psg_abort(1);
}
if( tsatpwr > 6 )
{
text_error("TSATPWR too large !!! ");
psg_abort(1);
}
if( dpwr > 46 )
{
text_error("don't fry the probe, DPWR too large! ");
psg_abort(1);
}
if( dpwr2 > 46 )
{
text_error("don't fry the probe, DPWR2 too large! ");
psg_abort(1);
}
if( dpwr3 > 50 )
{
text_error("don't fry the probe, dpwr3 too large! ");
psg_abort(1);
}
if( d_c90 > 62 )
{
text_error("don't fry the probe, DHPWR too large! ");
psg_abort(1);
}
if( pw > 200.0e-6 )
{
text_error("dont fry the probe, pw too high ! ");
psg_abort(1);
}
if( pwN > 200.0e-6 )
{
text_error("dont fry the probe, pwN too high ! ");
psg_abort(1);
}
if( pwc90 > 200.0e-6 )
{
text_error("dont fry the probe, pwc90 too high ! ");
psg_abort(1);
}
if( pwc180off > 200.0e-6 )
{
text_error("dont fry the probe, pwc180 too high ! ");
psg_abort(1);
}
if( gt3 > 2.5e-3 )
{
text_error("gt3 is too long\n");
psg_abort(1);
}
if( gt1 > 10.0e-3 || gt2 > 10.0e-3 || gt4 > 10.0e-3 || gt5 > 10.0e-3
|| gt6 > 10.0e-3 || gt7 > 10.0e-3 || gt8 > 10.0e-3
|| gt9 > 10.0e-3)
{
text_error("gt values are too long. Must be < 10.0e-3 or gt11=50us\n");
psg_abort(1);
}
if((fca180[A] == 'y') && (ni2 > 1))
{
text_error("must set fca180='n' to allow Calfa evolution (ni2>1)\n");
psg_abort(1);
}
if((fco180[A] == 'y') && (ni > 1))
{
text_error("must set fco180='n' to allow CO evolution (ni>1)\n");
psg_abort(1);
}
/* Phase incrementation for hypercomplex 2D data */
if (phase == 2) tsadd(t1,1,4);
if (phase2 == 2) tsadd(t5,1,4);
if (phase3 == 2) { tsadd(t4, 2, 4); icosel = 1; }
else icosel = -1;
/* Set up f1180 tau1 = t1 */
tau1 = d2;
if((f1180[A] == 'y') && (ni > 1)) {
if (pwc180off > 2.0*pwN)
tau1 += (1.0/(2.0*sw1) - 4.0*pwc90/PI - pwc180off
- WFG3_START_DELAY - WFG3_STOP_DELAY - 4.0e-6 - 2.0*POWER_DELAY - 4.0e-6);
else
tau1 += (1.0/(2.0*sw1) - 4.0*pwc90/PI - 2.0*pwN
- WFG3_START_DELAY - WFG3_STOP_DELAY - 4.0e-6 - 2.0*POWER_DELAY - 4.0e-6);
if(tau1 < 0.2e-6) {
tau1 = 0.4e-6;
text_error("tau1 could be negative");
}
}
else
{
if (pwc180off > 2.0*pwN)
tau1 = tau1 - 4.0*pwc90/PI - pwc180off
- WFG3_START_DELAY - WFG3_STOP_DELAY - 4.0e-6 - 2.0*POWER_DELAY - 4.0e-6;
else
tau1 = tau1 - 4.0*pwc90/PI - 2.0*pwN
- WFG3_START_DELAY - WFG3_STOP_DELAY - 4.0e-6 - 2.0*POWER_DELAY - 4.0e-6;
if(tau1 < 0.2e-6) tau1 = 0.4e-6;
}
tau1 = tau1/2.0;
/* Set up f2180 tau2 = t2 */
tau2 = d3;
if((f2180[A] == 'y') && (ni2 > 1)) {
if (pwc180off > 2.0*pwN)
tau2 += ( 1.0 / (2.0*sw2) - 4.0*pwc90/PI - 4.0e-6
- 2.0*POWER_DELAY
- WFG3_START_DELAY - pwc180off - WFG3_STOP_DELAY - 4.0e-6);
else
tau2 += ( 1.0 / (2.0*sw2) - 4.0*pwc90/PI - 4.0e-6
- 2.0*POWER_DELAY
- WFG3_START_DELAY - 2.0*pwN - WFG3_STOP_DELAY - 4.0e-6);
if(tau2 < 0.2e-6) {
tau2 = 0.4e-6;
text_error("tau2 could be negative");
}
}
else
{
if (pwc180off > 2.0*pwN)
tau2 = tau2 - 4.0*pwc90/PI - 4.0e-6
- 2.0*POWER_DELAY
- WFG3_START_DELAY - pwc180off - WFG3_STOP_DELAY - 4.0e-6;
else
tau2 = tau2 - 4.0*pwc90/PI - 4.0e-6
- 2.0*POWER_DELAY
- WFG3_START_DELAY - 2.0*pwN - WFG3_STOP_DELAY - 4.0e-6;
if(tau2 < 0.2e-6) tau2 = 0.4e-6;
}
tau2 = tau2/2.0;
/* Set up f3180 tau3 = t3 */
tau3 = d4;
if ((f3180[A] == 'y') && (ni3 > 1)) {
tau3 += ( 1.0 / (2.0*sw3) );
if(tau3 < 0.2e-6) tau3 = 0.4e-6;
}
tau3 = tau3/2.0;
/* Calculate modifications to phases for States-TPPI acquisition */
if( ix == 1) d2_init = d2 ;
t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
if(t1_counter % 2) {
tsadd(t1,2,4);
tsadd(t6,2,4);
}
if( ix == 1) d3_init = d3 ;
t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
if(t2_counter % 2) {
tsadd(t5,2,4);
tsadd(t6,2,4);
}
if( ix == 1) d4_init = d4 ;
t3_counter = (int) ( (d4-d4_init)*sw3 + 0.5 );
if(t3_counter % 2) {
tsadd(t2,2,4);
tsadd(t6,2,4);
}
/* BEGIN ACTUAL PULSE SEQUENCE */
status(A);
obsoffset(tof);
decoffset(dof); /* set Dec1 carrier at Co */
obspower(tsatpwr); /* Set transmitter power for 1H presaturation */
decpower(d_chirp); /* Set Dec1 power for hard 13C pulses */
dec2power(pwNlvl); /* Set Dec2 power for 15N hard pulses */
/* Presaturation Period */
if (fsat[0] == 'y')
{
delay(2.0e-5);
rgpulse(d1,zero,2.0e-6,2.0e-6); /* presaturation */
obspower(tpwr); /* Set transmitter power for hard 1H pulses */
delay(2.0e-5);
if (fscuba[0] == 'y')
{
delay(2.2e-2);
rgpulse(pw,zero,2.0e-6,0.0);
rgpulse(2*pw,one,2.0e-6,0.0);
rgpulse(pw,zero,2.0e-6,0.0);
delay(2.2e-2);
}
}
else
{
delay(d1);
}
obspower(tpwr); /* Set transmitter power for hard 1H pulses */
txphase(zero);
dec2phase(zero);
delay(1.0e-5);
/* Begin Pulses */
status(B);
rcvroff();
lk_hold();
delay(20.0e-6);
initval(1.0,v2);
obsstepsize(phase_sl);
xmtrphase(v2);
/* shaped pulse */
obspower(tpwrsl);
shaped_pulse(shp_sl,pw_sl,one,4.0e-6,0.0);
xmtrphase(zero);
obspower(tpwr); txphase(zero);
delay(4.0e-6);
/* shaped pulse */
rgpulse(pw,zero,0.0,0.0); /* 90 deg 1H pulse */
delay(0.2e-6);
zgradpulse(gzlvl5,gt5);
delay(2.0e-6);
delay(taua - gt5 - 2.2e-6); /* taua <= 1/4JNH */
sim3pulse(2*pw,0.0e-6,2*pwN,zero,zero,zero,0.0,0.0);
txphase(three); dec2phase(zero); decphase(zero);
delay(0.2e-6);
zgradpulse(gzlvl5,gt5);
delay(200.0e-6);
delay(taua - gt5 - 200.2e-6 - 2.0e-6);
if (sel_flg[A] == 'n')
{
rgpulse(pw,three,2.0e-6,0.0);
delay(0.2e-6);
zgradpulse(gzlvl3,gt3);
delay(200.0e-6);
dec2rgpulse(pwN,zero,0.0,0.0);
delay( zeta );
dec2rgpulse(2.0*pwN,zero,0.0,0.0);
decshaped_pulse(spchirp,pwchirp,zero,0.0,0.0);
delay(zeta -WFG_START_DELAY -pwchirp -WFG_STOP_DELAY -2.0e-6);
dec2rgpulse(pwN,zero,2.0e-6,0.0);
}
else
{
rgpulse(pw,one,2.0e-6,0.0);
initval(1.0,v3);
dec2stepsize(45.0);
dcplr2phase(v3);
delay(0.2e-6);
zgradpulse(gzlvl3,gt3);
delay(200.0e-6);
dec2rgpulse(pwN,zero,0.0,0.0);
dcplr2phase(zero);
delay(1.34e-3 - SAPS_DELAY - 2.0*pw);
rgpulse(pw,one,0.0,0.0);
rgpulse(2.0*pw,zero,0.0,0.0);
rgpulse(pw,one,0.0,0.0);
delay( zeta - 1.34e-3 - 2.0*pw);
dec2rgpulse(2.0*pwN,zero,0.0,0.0);
decshaped_pulse(spchirp,pwchirp,zero,0.0,0.0);
delay(zeta -WFG_START_DELAY -pwchirp -WFG_STOP_DELAY -2.0e-6);
dec2rgpulse(pwN,zero,2.0e-6,0.0);
}
dec2phase(zero); decphase(t1);
decpower(d_c90);
delay(0.2e-6);
zgradpulse(gzlvl8,gt8);
delay(200.0e-6);
decrgpulse(pwc90,t1,2.0e-6,0.0);
/* t1 period for Co evolution begins */
if (fco180[A]=='n')
{
decpower(d_c180);
delay(tau1);
sim3shaped_pulse("",spca180,"",0.0,pwc180off,2.0*pwN,zero,zero,zero,4.0e-6,0.0);
decpower(d_c90);
delay(tau1);
}
else /* for checking sequence */
{
decpower(d_c180);
decrgpulse(pwc180on,zero,4.0e-6,0.0);
decpower(d_c90);
}
/* t1 period for Co evolution ends */
decrgpulse(pwc90,zero,4.0e-6,0.0);
decoffset(dof-(174-56)*dfrq); /* change Dec1 carrier to Ca (55 ppm) */
delay(0.2e-6);
zgradpulse(gzlvl4,gt4);
delay(150.0e-6);
/* Turn on D decoupling using the third decoupler */
dec3phase(one);
dec3power(pwDlvl);
dec3rgpulse(pwD,one,4.0e-6,0.0);
dec3phase(zero);
dec3power(dpwr3);
dec3unblank();
setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
/* Turn on D decoupling */
decrgpulse(pwc90,t5,2.0e-6,0.0);
/* t2 period for Ca evolution begins */
if (fca180[A]=='n')
{
decphase(zero); dec2phase(zero);
decpower(d_c180);
delay(tau2);
sim3shaped_pulse("",spco180,"",0.0,pwc180off,2.0*pwN,zero,zero,zero,4.0e-6,0.0);
decpower(d_c90);
delay(tau2);
}
else /* for checking sequence */
{
decpower(d_c180);
decrgpulse(pwc180on,zero,4.0e-6,0.0);
decpower(d_c90);
}
/* t2 period for Ca evolution ends */
decrgpulse(pwc90,zero,4.0e-6,0.0);
/* Turn off D decoupling */
setstatus(DEC3ch, FALSE, 'c', FALSE, dmf3);
dec3blank();
dec3phase(three);
dec3power(pwDlvl);
dec3rgpulse(pwD,three,4.0e-6,0.0);
/* Turn off D decoupling */
decoffset(dof); /* set carrier back to Co */
decpower(d_chirp);
delay(0.2e-6);
zgradpulse(gzlvl9,gt9);
delay(150.0e-6);
/* t3 period begins */
dec2rgpulse(pwN,t2,2.0e-6,0.0);
dec2phase(t3);
delay(bigTN - tau3);
dec2rgpulse(2.0*pwN,t3,0.0,0.0);
decshaped_pulse(spchirp,pwchirp,zero,0.0,0.0);
txphase(zero);
dec2phase(t4);
delay(0.2e-6);
zgradpulse(gzlvl1,gt1);
delay(500.0e-6);
delay(bigTN - WFG_START_DELAY - pwchirp - WFG_STOP_DELAY
-gt1 -500.2e-6 -2.0*GRADIENT_DELAY);
delay(tau3);
sim3pulse(pw,0.0e-6,pwN,zero,zero,t4,0.0,0.0);
/* t3 period ends */
decpower(d_c90);
decrgpulse(pwc90,zero,4.0e-6,0.0);
decoffset(dof-(174-56)*dfrq);
decrgpulse(pwc90,zero,20.0e-6,0.0);
delay(0.2e-6);
zgradpulse(gzlvl6,gt6);
delay(2.0e-6);
dec2phase(zero);
delay(taub - POWER_DELAY - 4.0e-6 - pwc90 - 20.0e-6 - pwc90 - gt6 - 2.2e-6);
sim3pulse(2*pw,0.0e-6,2*pwN,zero,zero,zero,0.0,0.0);
decoffset(dof);
delay(0.2e-6);
zgradpulse(gzlvl6,gt6);
delay(200.0e-6);
txphase(one);
dec2phase(one);
delay(taub - gt6 - 200.2e-6);
sim3pulse(pw,0.0e-6,pwN,one,zero,one,0.0,0.0);
delay(0.2e-6);
zgradpulse(gzlvl7,gt7);
delay(2.0e-6);
txphase(zero);
dec2phase(zero);
delay(taub - gt7 - 2.2e-6);
sim3pulse(2*pw,0.0e-6,2*pwN,zero,zero,zero,0.0,0.0);
delay(0.2e-6);
zgradpulse(gzlvl7,gt7);
delay(200.0e-6);
delay(taub - gt7 - 200.2e-6);
sim3pulse(pw,0.0e-6,pwN,zero,zero,zero,0.0,0.0);
delay(gt2 +gstab -0.5*(pwN -pw) -2.0*pw/PI);
rgpulse(2*pw,zero,0.0,0.0);
delay(2.0e-6);
zgradpulse(icosel*gzlvl2,gt2);
decpower(dpwr);
dec2power(dpwr2);
delay(gstab -2.0e-6 -2.0*GRADIENT_DELAY -2.0*POWER_DELAY);
lk_sample();
/* BEGIN ACQUISITION */
status(C);
setreceiver(t6);
}
pulsesequence()
{
/* DECLARE VARIABLES */
char fsat[MAXSTR],
fscuba[MAXSTR],
f1180[MAXSTR], /* Flag to start t1 @ halfdwell */
sh_reb[MAXSTR],
codec[MAXSTR],
MQ_flg[MAXSTR],
filter_flg[MAXSTR];
int phase,
t1_counter; /* used for states tppi in t1 */
double tau1, /* t1 delay */
taua, /* set to exactly 1/4JCH */
tsatpwr, /* low level 1H trans.power for presat */
sw1, /* sweep width in f1 */
tpwr_cp, /* power level for 1H CPMG */
pw_cp, /* 1H pw for CPMG */
ncyc_cp, /* number of CPMG cycles */
time_T2, /* total time for CPMG trains */
tau_cpmg,
dhpwr,
pwc,
dmf_co,
dpwr_co,
dresco,
gt0,
gt1,
gt2,
gt3,
gt4,
gt5,
gt6,
gzlvl0,
gzlvl1,
gzlvl2,
gzlvl3,
gzlvl4,
gzlvl5,
gzlvl6,
tpwr,
pw,
d_reb,
pwc_reb,
dpwr3_D,
pwd,
pwd1,
tau_eq,
pwn,
dhpwr2;
/* LOAD VARIABLES */
getstr("fsat",fsat);
getstr("f1180",f1180);
getstr("fscuba",fscuba);
getstr("sh_reb",sh_reb);
getstr("codec",codec);
getstr("MQ_flg",MQ_flg);
getstr("filter_flg",filter_flg);
taua = getval("taua");
tpwr = getval("tpwr");
tsatpwr = getval("tsatpwr");
dpwr = getval("dpwr");
phase = (int) ( getval("phase") + 0.5);
sw1 = getval("sw1");
tpwr_cp = getval("tpwr_cp");
pw_cp = getval("pw_cp");
ncyc_cp = getval("ncyc_cp");
time_T2 = getval("time_T2");
dhpwr = getval("dhpwr");
pwc = getval("pwc");
pwn = getval("pwn");
dhpwr2 = getval("dhpwr2");
dmf_co = getval("dmf_co");
dpwr_co = getval("dpwr_co");
dresco = getval("dresco");
gt0 = getval("gt0");
gt1 = getval("gt1");
gt2 = getval("gt2");
gt3 = getval("gt3");
gt4 = getval("gt4");
gt5 = getval("gt5");
gt6 = getval("gt6");
gzlvl0 = getval("gzlvl0");
gzlvl1 = getval("gzlvl1");
gzlvl2 = getval("gzlvl2");
gzlvl3 = getval("gzlvl3");
gzlvl4 = getval("gzlvl4");
gzlvl5 = getval("gzlvl5");
gzlvl6 = getval("gzlvl6");
tpwr = getval("tpwr");
pw = getval("pw");
d_reb = getval("d_reb");
pwc_reb = getval("pwc_reb");
dpwr3_D = getval("dpwr3_D");
pwd = getval("pwd");
pwd1 = getval("pwd1");
tau_eq = getval("tau_eq");
/* LOAD PHASE TABLE */
settable(t1,4,phi1);
settable(t2,2,phi2);
settable(t4,8,phi4);
settable(t5,4,rec);
/* CHECK VALIDITY OF PARAMETER RANGES */
if((dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y' ))
{
printf("incorrect dec1 decoupler flags! ");
abort(1);
}
if((dm2[A] == 'y' || dm2[B] == 'y' || dm2[C] == 'y' || dm2[D] == 'y'))
{
printf("incorrect dec2 decoupler flags! ");
abort(1);
}
if( tsatpwr > 6 )
{
printf("TSATPWR too large !!! ");
abort(1);
}
if( dpwr > 48 )
{
printf("don't fry the probe, DPWR too large! ");
abort(1);
}
if(tpwr_cp > 62)
{
printf("don't fry the probe, tpwr_cp too large: < 62! ");
abort(1);
}
if(pw_cp < 9.5e-6) {
printf("pw_cp is too low; > 9.5us\n");
abort(1);
}
if( dpwr2 > -16 )
{
printf("don't fry the probe, DPWR2 too large! ");
abort(1);
}
if( pw > 20.0e-6 )
{
printf("dont fry the probe, pw too high ! ");
abort(1);
}
if(gt1 > 3e-3 || gt2 > 3e-3 || gt3 > 3e-3 || gt4 > 3e-3
|| gt5 > 3e-3 || gt6 > 3e-3)
{
printf("gradients on for too long. Must be < 3e-3 \n");
abort(1);
}
if(ncyc_cp > 80) {
printf("ncyc_cp is too large; must be less than 81\n");
abort(1);
}
if(time_T2 > .080) {
printf("time_T2 is too large; must be less than 80 ms\n");
abort(1);
}
if(ncyc_cp > 0) {
tau_cpmg = time_T2/(4.0*ncyc_cp) - pw_cp;
if(ix==1)
printf("nuCPMG for curent experiment is (Hz): %5.3f\n",1/(4.0*(tau_cpmg+pw_cp)));
}
else {
tau_cpmg = time_T2/(4.0) - pw_cp;
if(ix==1)
printf("nuCPMG for curent experiment is (Hz): not applicable");
}
if(tau_cpmg + pw_cp < 125e-6) {
printf("tau_cpmg is too small; decrease ncyc_cp\n");
abort(1);
}
if(dpwr_co > 42) {
printf("dpwr_co is too high; < 42\n");
abort(1);
}
if(dpwr3_D > 51) {
printf("dpwr3_D is too high; < 52\n");
abort(1);
}
if(dpwr3 > 59) {
printf("dpwr3 is too high; < 60\n");
abort(1);
}
if(ix==1)
printf("If at 800 turn dpwr3=-16, pwd1=0\n");
/* Phase incrementation for hypercomplex 2D data */
if (phase == 2)
tsadd(t1,1,4);
/* Set up f1180 tau1 = t1 */
tau1 = d2;
if(MQ_flg[A] == 'n')
tau1 = tau1 - 4.0/PI*pwc - POWER_DELAY - PRG_START_DELAY
- 2.0*pw - 2.0*pwn - PRG_STOP_DELAY - POWER_DELAY
- 4.0e-6;
else
tau1 = tau1 - 4.0/PI*pwc - POWER_DELAY - PRG_START_DELAY
- 2.0*pw - 2.0*pwn - PRG_STOP_DELAY - POWER_DELAY
- 4.0e-6;
if(f1180[A] == 'y') {
tau1 += ( 1.0 / (2.0*sw1));
if(tau1 < 0.4e-6) tau1 = 0.4e-6;
}
if(tau1 < 0.4e-6)
tau1 = 0.4e-6;
tau1 = tau1/2.0;
/* Calculate modifications to phases for States-TPPI acquisition */
if( ix == 1) d2_init = d2 ;
t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
if(t1_counter % 2) {
tsadd(t1,2,4);
tsadd(t5,2,4);
}
/* BEGIN ACTUAL PULSE SEQUENCE */
status(A);
rlpower(tsatpwr,TODEV); /* Set transmitter power for 1H presaturation */
rlpower(dhpwr,DODEV); /* Set Dec1 power for 13C pulses */
rlpower(dhpwr2,DO2DEV); /* Set Dec2 power for 15N pulses */
obsoffset(tof);
/* Presaturation Period */
status(B);
if (fsat[0] == 'y')
{
delay(2.0e-5);
rgpulse(d1,zero,2.0e-6,2.0e-6); /* presaturation */
rlpower(tpwr,TODEV); /* Set transmitter power for hard 1H pulses */
delay(2.0e-5);
if(fscuba[0] == 'y')
{
delay(2.2e-2);
rgpulse(pw,zero,2.0e-6,0.0);
rgpulse(2*pw,one,2.0e-6,0.0);
rgpulse(pw,zero,2.0e-6,0.0);
delay(2.2e-2);
}
}
else
{
delay(d1);
}
rlpower(tpwr,TODEV); /* Set transmitter power for 1H CPMG pulses */
txphase(zero);
dec2phase(zero);
decphase(zero);
delay(1.0e-5);
/* Begin Pulses */
status(C);
rcvroff();
delay(20.0e-6);
decrgpulse(pwc,zero,4.0e-6,0.0);
delay(2.0e-6);
rgradient('z',gzlvl1);
delay(gt1);
rgradient('z',0.0);
delay(250.0e-6);
rgpulse(pw,zero,0.0,0.0);
decpower(d_reb);
delay(2.0e-6);
rgradient('z',gzlvl2);
delay(gt2);
rgradient('z',0.0);
delay(150.0e-6);
if(filter_flg[A] == 'y')
delay(taua - POWER_DELAY - gt2 - 152e-6
- WFG2_START_DELAY - 0.5*pwc_reb - 4.0/PI*pw);
else
delay(taua - POWER_DELAY - gt2 - 152e-6
- WFG2_START_DELAY - 0.5*pwc_reb);
simshaped_pulse("hard",sh_reb,2.0*pw,pwc_reb,zero,zero,0.0,0.0);
txphase(one);
decpower(dhpwr);
decphase(t4);
delay(taua - 0.5*pwc_reb - WFG2_STOP_DELAY - POWER_DELAY - gt2 - 152e-6 );
delay(2.0e-6);
rgradient('z',gzlvl2);
delay(gt2);
rgradient('z',0.0);
delay(150.0e-6);
if(filter_flg[A] == 'n')
rgpulse(pw,one,0.0,0.0);
if(filter_flg[A] == 'y') {
decrgpulse(pwc,t4,0.,0.);
decpower(d_reb);
decphase(zero);
delay(2.0e-6);
rgradient('z',gzlvl0);
delay(gt0);
rgradient('z',0.0);
delay(150.0e-6);
delay(taua - POWER_DELAY - gt0 - 152e-6
- WFG2_START_DELAY - 0.5*pwc_reb);
simshaped_pulse("hard",sh_reb,2.0*pw,pwc_reb,zero,zero,0.0,0.0);
txphase(one);
decpower(dhpwr);
decphase(t4);
delay(taua - 0.5*pwc_reb - WFG2_STOP_DELAY - POWER_DELAY - gt0 - 152e-6 );
delay(2.0e-6);
rgradient('z',gzlvl0);
delay(gt0);
rgradient('z',0.0);
delay(150.0e-6);
decrgpulse(pwc,t4,0.0,0.0);
rgpulse(pw,one,0.0,0.0);
}
decphase(t1);
delay(2.0e-6);
rgradient('z',gzlvl3);
delay(gt3);
rgradient('z',0.0);
delay(250.0e-6);
/* turn on 2H decoupling */
dec3phase(one);
dec3power(dpwr3);
dec3rgpulse(pwd1,one,4.0e-6,0.0);
dec3phase(zero);
dec3unblank();
dec3power(dpwr3_D);
dec3prgon(dseq3,pwd,dres3);
dec3on();
/* turn on 2H decoupling */
if(MQ_flg[A] == 'y') {
rgpulse(pw,zero,2.0e-6,0.0);
delay(2.0*pwn - PRG_START_DELAY - PRG_STOP_DELAY);
}
decrgpulse(pwc,t1,4.0e-6,0.0);
decphase(zero);
/* 13CO decoupling on */
decpower(dpwr_co);
decprgon(codec,1.0/dmf_co,dresco);
decon();
/* 13CO decoupling on */
delay(tau1);
rgpulse(2.0*pw,zero,0.0,0.0);
dec2rgpulse(2.0*pwn,zero,0.0,0.0);
delay(tau1);
/* 13CO decoupling off */
decoff();
decprgoff();
/* 13CO decoupling off */
decpower(dhpwr);
decrgpulse(pwc,zero,4.0e-6,0.0);
if(MQ_flg[A] == 'y')
rgpulse(pw,zero,0.0,0.0);
/* turn off decoupling */
dec3off();
dec3prgoff();
dec3blank();
dec3phase(three);
dec3power(dpwr3);
dec3rgpulse(pwd1,three,4.0e-6,0.0);
/* turn off decoupling */
obspower(tpwr_cp);
if(MQ_flg[A] == 'n') {
delay(2.0e-6);
rgradient('z',gzlvl4);
delay(gt4);
rgradient('z',0.0);
delay(250.0e-6);
}
else {
delay(2.0e-6);
rgradient('z',-1.0*gzlvl4);
delay(gt4);
rgradient('z',0.0);
delay(250.0e-6);
}
/* now include a delay to allow the spin system to equilibrate */
delay(tau_eq);
rgpulse(pw_cp,t2,4.0e-6,0.0);
txphase(one);
/* start of the CPMG period 1 */
if(ncyc_cp == 1) {
delay(tau_cpmg - (2.0/PI)*pw_cp);
rgpulse(2.0*pw_cp,one,0.0,0.0);
delay(tau_cpmg);
}
if(ncyc_cp == 2) {
delay(tau_cpmg - (2.0/PI)*pw_cp);
rgpulse(2.0*pw_cp,one,0.0,0.0);
delay(tau_cpmg);
delay(tau_cpmg);
rgpulse(2.0*pw_cp,one,0.0,0.0);
delay(tau_cpmg);
}
if(ncyc_cp > 2) {
delay(tau_cpmg - (2.0/PI)*pw_cp);
rgpulse(2.0*pw_cp,one,0.0,0.0);
delay(tau_cpmg);
initval(ncyc_cp-2,v4);
loop(v4,v5);
delay(tau_cpmg);
rgpulse(2.0*pw_cp,one,0.0,0.0);
delay(tau_cpmg);
endloop(v5);
delay(tau_cpmg);
rgpulse(2.0*pw_cp,one,0.0,0.0);
delay(tau_cpmg);
}
txphase(t4); decphase(zero);
rgpulse(2.0*pw_cp,t4,2.0e-6,2.0e-6);
txphase(one);
if(ncyc_cp == 1) {
delay(tau_cpmg);
rgpulse(2.0*pw_cp,one,0.0,0.0); txphase(one);
delay(tau_cpmg - 2.0/PI*pw_cp);
}
if(ncyc_cp == 2) {
delay(tau_cpmg);
rgpulse(2.0*pw_cp,one,0.0,0.0);
delay(tau_cpmg);
delay(tau_cpmg);
rgpulse(2.0*pw_cp,one,0.0,0.0); txphase(one);
delay(tau_cpmg - 2.0/PI*pw_cp);
}
if(ncyc_cp > 2) {
delay(tau_cpmg);
rgpulse(2.0*pw_cp,one,0.0,0.0);
delay(tau_cpmg);
initval(ncyc_cp-2,v4);
loop(v4,v5);
delay(tau_cpmg);
rgpulse(2.0*pw_cp,one,0.0,0.0);
delay(tau_cpmg);
endloop(v5);
delay(tau_cpmg);
rgpulse(2.0*pw_cp,one,0.0,0.0); txphase(one);
delay(tau_cpmg - 2.0/PI*pw_cp);
}
rgpulse(pw_cp,zero,0.0,0.0);
delay(2.0e-6);
rgradient('z',gzlvl5);
delay(gt5);
rgradient('z',0.0);
delay(250.0e-6);
obspower(tpwr);
rgpulse(pw,zero,4.0e-6,0.0);
decpower(d_reb);
delay(2.0e-6);
rgradient('z',gzlvl6);
delay(gt6);
rgradient('z',0.0);
delay(150.0e-6);
delay(taua - POWER_DELAY - gt6 - 152e-6
- WFG2_START_DELAY - 0.5*pwc_reb);
simshaped_pulse("hard",sh_reb,2.0*pw,pwc_reb,zero,zero,0.0,0.0);
delay(taua - 0.5*pwc_reb - WFG2_STOP_DELAY - 2.0*POWER_DELAY - gt6 - 152e-6);
rlpower(dpwr,DODEV); /* Set power for decoupling */
rlpower(dpwr2,DO2DEV); /* Set power for decoupling */
delay(2.0e-6);
rgradient('z',gzlvl6);
delay(gt6);
rgradient('z',0.0);
delay(150.0e-6);
rgpulse(pw,zero,0.0,0.0);
/* rcvron(); */ /* Turn on receiver to warm up before acq */
/* BEGIN ACQUISITION */
status(D);
setreceiver(t5);
}
pulsesequence()
{
/* Declare variables */
int
t1_counter, /* used for states tppi in t1 */
psi2 = getval("psi2"), /* collection of inphase and antiphase components */
phase = getval("phase"); /* collection of indirect with states method */
char f1180[MAXSTR]; /* half-dwell time in t1 */
double
d0 = getval("d0"),
corr = getval("corr"), /* adjustable correction */
tau1, /* t1 delay */
pwN = getval("pwN"), /* hard 15N 90deg pulse length */
pwNlvl = getval("pwNlvl"), /* power level for hard 15N pulses */
pwC = getval("pwC"), /* hard 13C 90deg pulse length */
pwClvl = getval("pwClvl"), /* power level for hard 15N pulses */
tauT = getval("tauT"), /* optimal transfer delay in seconds */
gt0 = getval("gt0"),
gt1 = getval("gt1"), /* coherence pathway gradients */
gstab = getval("gstab"), /* field stabilization delay */
gzlvl0 = getval("gzlvl0"),
gzlvl1 = getval("gzlvl1"),
pwHs = getval("pwHs"), /* H1 90 degree pulse length at tpwrs */
compH = getval("compH"), /* H1 amplifier compression factor */
tpwrs = getval("tpwrs"), /* power for the pwHs ("H2Osinc") pulse */
tpwrsf_d = getval("tpwrsf_d"), /*fine power for the pwHs ("H2Osinc") pulse */
phincr_d = getval("phincr_d"); /* small-angle phase adjust for flipback pulse */
/* set phincr_d to zero if shape has phase correction
already built-in (such as H2Osinc_d.RF) */
if (phincr_d < 0.0) phincr_d=360+phincr_d;
initval(phincr_d,v8);
getstr("f1180",f1180);
tau1 = d2;
if ( ni > 0 )
{
if (f1180[A] == 'y')
tau1 = d2 + 1./(2.*sw1) - 4*pwN/PI - rof1 - 1.0e-6;
else
tau1 = d2 - 4*pwN/PI - rof1 - 1.0e-6;
}
/* Check the gradient parameters. */
if ( fabs(gzlvl0) > 30000 )
{
printf( "gzlvl0 is too high !!!\n" );
psg_abort(1);
}
if ( fabs(gzlvl1) > 30000 )
{
printf( "gzlvl1 is too high !!!\n" );
psg_abort(1);
}
/* Check other parameters */
if ( pw > 20e-6 )
{
printf( "your pw seems too long !!! ");
printf( " pw must be <= 20 usec \n");
psg_abort(1);
}
if ( pwN > 50e-6 )
{
printf( "your pwN seems too long !!! ");
printf( " pwN must be <= 50 usec \n");
psg_abort(1);
}
if ( pwC > 20e-6 )
{
printf( "your pwC seems too long !!! ");
printf( " pwC must be <= 20 usec \n");
psg_abort(1);
}
if ( ( dm2[A] == 'y' ) || ( dm2[B] == 'y' ) || ( dm2[C] == 'y' ) )
{
printf( "no decoupling should be done during experiment !!!\n" );
psg_abort(1);
}
if ( ( dm[A] == 'y' ) || ( dm[B] == 'y' ) || ( dm[C] == 'y' ) )
{
printf( "no decoupling should be done on channel 2 !!!\n" );
psg_abort(1);
}
/* Set variables */
settable(t1, 2, phi1);
settable(t2, 1, phi2);
settable(t3, 2, rec);
/* PHASES AND INCREMENTED TIMES */
/* Phase incrementation for two fids to add */
if (psi2 == 2) tsadd(t2,2,4);
/* Phase incrementation for hypercomplex 2D data, States-Haberkorn element */
if (phase == 2) tsadd(t1,1,4);
/* Calculate modifications to phases for States-TPPI acquisition */
if( ix == 1) d2_init = d2;
t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
if(t1_counter % 2)
{ tsadd(t1,2,4); tsadd(t3,2,4); }
status(A);
delay(d0);
obsoffset(tof);
obspower(tpwrs);
txphase(zero);
decphase(zero);
decpower(pwClvl);
dec2phase(zero);
dec2power(pwNlvl);
delay(d1);
/* for a selective H20 one-lobe sinc pulse */
tpwrs = tpwr - 20.0*log10(pwHs/(compH*pw*1.69)); /*needs 1.69 times more*/
tpwrs = (int) (tpwrs); /*power than a square pulse */
status(B);
dec2rgpulse(pwN,zero,rof1,rof1);
zgradpulse(gzlvl0,gt0);
delay(gstab);
obsstepsize(1.0);
xmtrphase(v8);
if (tpwrsf_d<4095.0)
{
obspower(tpwrs+6.0);
obspwrf(tpwrsf_d);
shaped_pulse("H2Osinc_d", pwHs, two, rof1, 0.0);
}
else
{
obspower(tpwrs);
shaped_pulse("H2Osinc_d", pwHs, two, rof1, 0.0);
}
xmtrphase(zero);
obspower(tpwr); obspwrf(4095.0);
rgpulse(pw, zero, rof1, 1.0e-6);
zgradpulse(gzlvl1,gt1);
obspower(tpwrs);
delay(tauT-gt1-pwHs-4*pw/PI-2*GRADIENT_DELAY-2*POWER_DELAY
-2.0*SAPS_DELAY-WFG_START_DELAY-7.0e-5);
obsstepsize(1.0);
xmtrphase(v8);
if (tpwrsf_d<4095.0)
{
obspower(tpwrs+6.0);
obspwrf(tpwrsf_d);
shaped_pulse("H2Osinc_d", pwHs, three, rof1, 0.0);
}
else
{
obspower(tpwrs);
shaped_pulse("H2Osinc_d", pwHs, three, rof1, 0.0);
}
xmtrphase(zero); obspower(tpwr); obspwrf(4095.0);
rgpulse(pw, one, rof1, 1.0e-6);
dec2rgpulse(pwN,t1,rof1,1.0e-6);
dec2phase(zero);
if ((tau1-pwC/2.0)>0)
{
delay((tau1-pwC)/2);
sim3pulse(0.,2.0*pwC,0.,zero,zero,zero,rof1,1.0e-6);
delay((tau1-pwC)/2);
}
dec2rgpulse(pwN,zero,rof1,1.0e-6);
obspower(tpwrs);
delay(tauT-gt1-pwHs-2*pwN-0.5*pw-2*pw/PI-2*POWER_DELAY
-2*GRADIENT_DELAY-2.0*SAPS_DELAY-rof1-gstab-7.0e-6);
zgradpulse(gzlvl1,gt1);
delay(gstab);
obsstepsize(1.0);
xmtrphase(v8);
if (tpwrsf_d<4095.0)
{
obspower(tpwrs+6.0);
obspwrf(tpwrsf_d);
shaped_pulse("H2Osinc_d", pwHs, two, rof1, 0.0);
}
else
{
obspower(tpwrs);
shaped_pulse("H2Osinc_d", pwHs, two, rof1, 0.0);
}
xmtrphase(zero); obspower(tpwr); obspwrf(4095.0);
sim3pulse(pw,0.,2*pwN,zero,zero,zero,rof1,1.0e-6);
zgradpulse(gzlvl1,gt1);
delay(tauT-corr-gt1-2*pwN-2*pw/PI-0.5*pw-2.0*SAPS_DELAY-2*GRADIENT_DELAY-rof1-1.0e-6);
/* set corr to a value to obtain lp=0 */
dec2rgpulse(pwN,t2,rof1,0.0);
status(C);
setreceiver(t3);
}
pulsesequence() {
// Define Variables and Objects and Get Parameter Values
CP hx = getcp("HX",0.0,0.0,0,1);
strncpy(hx.fr,"dec",3);
strncpy(hx.to,"obs",3);
putCmd("frHX='dec'\n");
putCmd("toHX='obs'\n");
DSEQ dec = getdseq("H");
strncpy(dec.t.ch,"dec",3);
putCmd("chHtppm='dec'\n");
strncpy(dec.s.ch,"dec",3);
putCmd("chHspinal='dec'\n");
//--------------------------------------
// Copy Current Parameters to Processed
//-------------------------------------
putCmd("groupcopy('current','processed','acquisition')");
// Dutycycle Protection
DUTY d = init_dutycycle();
d.dutyon = getval("pw1Hhytrap") + getval("pw2Hhytrap") + getval("tHX");
d.dutyoff = d1 + 4.0e-6 + getval("t1HYtrap") + getval("t2HYtrap");
d.c1 = d.c1 + (!strcmp(dec.seq,"tppm"));
d.c1 = d.c1 + ((!strcmp(dec.seq,"tppm")) && (dec.t.a > 0.0));
d.t1 = getval("rd") + getval("ad") + at;
d.c2 = d.c2 + (!strcmp(dec.seq,"spinal"));
d.c2 = d.c2 + ((!strcmp(dec.seq,"spinal")) && (dec.s.a > 0.0));
d.t2 = getval("rd") + getval("ad") + at;
d = update_dutycycle(d);
abort_dutycycle(d,10.0);
// Set Phase Tables
settable(ph1Hhytrap,4,table1);
settable(phYhytrap,4,table2);
settable(ph2Hhytrap,4,table3);
settable(phXhx,4,table4);
settable(phHhx,4,table5);
settable(phRec,4,table6);
setreceiver(phRec);
// Begin Sequence
txphase(phXhx); decphase(ph1Hhytrap); dec2phase(phYhytrap);
obspwrf(getval("aXhx")); decpwrf(getval("aHhytrap")); dec2pwrf(getval("aYhytrap"));
obsunblank(); decunblank(); _unblank34();
delay(d1);
sp1on(); delay(2.0e-6); sp1off(); delay(2.0e-6);
// TRAPDOR on H with Y Modulation
decrgpulse(getval("pw1Hhytrap"),ph1Hhytrap,0.0,0.0);
decphase(ph2Hhytrap);
decunblank();
dec2on();
delay(getval("t1HYtrap"));
dec2off();
decrgpulse(getval("pw2Hhytrap"),ph2Hhytrap,0.0,0.0);
decphase(phHhx);
decunblank();
decphase(phHhx);
decpwrf(getval("aHhx"));
delay(getval("t2HYtrap"));
// H to X Cross Polarization
_cp_(hx,phHhx,phXhx);
// Begin Acquisition
_dseqon(dec);
obsblank(); _blank34();
delay(getval("rd"));
startacq(getval("ad"));
acquire(np, 1/sw);
endacq();
_dseqoff(dec);
obsunblank(); decunblank(); _unblank34();
}
pulsesequence()
{
/* DECLARE AND LOAD VARIABLES */
char f1180[MAXSTR], /* Flag to start t1 @ halfdwell */
Cfilter[MAXSTR]; /*do C' Cfilter */
int icosel, /* used to get n and p type */
t1_counter; /* used for states tppi in t1 */
double tCN = getval("tCN"),
kappa, /*semi-constant time scale factor*/
tau1, /* t1 delay */
lambda = 0.91/(4.0*getval("JNH")), /* 1/4J H1 evolution delay */
pwClvl = getval("pwClvl"), /* coarse power for C13 pulse */
pwC = getval("pwC"), /* C13 90 degree pulse length at pwClvl */
rf0, /* maximum fine power when using pwC pulses */
pwC3 = getval("pwC3"), /* 180 selective Ca null on C' */
pwC8 = getval("pwC8"), /* 180 selective C' null on Ca */
pwC6 = getval("pwC6"), /* 90 selective C' null on Ca */
rf3,
rf8,
rf6,
compH = getval("compH"), /* adjustment for H1 amplifier compression */
compN = getval("compN"), /* adjustment for N15 amplifier compression */
compC = getval("compC"), /* adjustment for C13 amplifier compression */
tpwrsf_n = getval("tpwrsf_n"), /* fine power adustment for first soft pulse(TROSY=y)*/
tpwrsf_d = getval("tpwrsf_d"), /* fine power adustment for second soft pulse(TROSY=y)*/
pwHs = getval("pwHs"), /* H1 90 degree pulse length at tpwrs */
tpwrs, /* power for the pwHs ("H2Osinc") pulse */
pwNlvl = getval("pwNlvl"), /* power for N15 pulses */
pwN = getval("pwN"), /* N15 90 degree pulse length at pwNlvl */
sw1 = getval("sw1"),
gt1 = getval("gt1"), /* coherence pathway gradients */
gzcal = getval("gzcal"), /* dac to G/cm conversion */
gzlvl1 = getval("gzlvl1"),
gzlvl2 = getval("gzlvl2"),
gt0 = getval("gt0"), /* other gradients */
gt3 = getval("gt3"),
gt5 = getval("gt5"),
gstab = getval("gstab"),
gzlvl0 = getval("gzlvl0"),
gzlvl3 = getval("gzlvl3"),
gzlvl5 = getval("gzlvl5");
getstr("f1180",f1180);
getstr("Cfilter",Cfilter);
/* LOAD PHASE TABLE */
settable(t1,2,phi1);
settable(t2,4,phi2);
settable(t3,1,phi3);
settable(t4,2,rec);
/* INITIALIZE VARIABLES */
/* maximum fine power for pwC pulses */
rf0 = 4095.0;
/* 180 degree square pulse on Ca, null at CO 118ppm away */
rf3 = (1/compC*compC*4095.0*pwC*2.0)/pwC3; /* no need for compC at high power level*/
rf3 = (int) (rf3 + 0.5);
/* 90 degree one-lobe sinc pulse on CO, null at Ca 118ppm away */
rf6 = (compC*4095.0*pwC*1.69)/pwC6; /* needs 1.69 times more */
rf6 = (int) (rf6 + 0.5); /* power than a square pulse */
/* 180 degree one-lobe sinc pulse on CO, null at Ca 118ppm away */
rf8 = (compC*4095.0*pwC*2.0*1.65)/pwC8; /* needs 1.65 times more */
rf8 = (int) (rf8 + 0.5); /* power than a square pulse */
/* selective H20 one-lobe sinc pulse */
tpwrs = tpwr - 20.0*log10(pwHs/(compH*pw*1.69)); /*needs 1.69 times more*/
tpwrs = (int) (tpwrs); /*power than a square pulse */
/* CHECK VALIDITY OF PARAMETER RANGES */
if((dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y' ))
{ text_error("incorrect dec1 decoupler flags! Should be 'nnn' "); psg_abort(1); }
if((dm2[A] == 'y' || dm2[B] == 'y'))
{ text_error("incorrect dec2 decoupler flags! Should be 'nny' "); psg_abort(1); }
if( dpwr2 > 50 )
{ text_error("don't fry the probe, DPWR2 too large! "); psg_abort(1); }
if( pw > 50.0e-6 )
{ text_error("dont fry the probe, pw too high ! "); psg_abort(1); }
if( pwN > 100.0e-6 )
{ text_error("dont fry the probe, pwN too high ! "); psg_abort(1); }
/* PHASES AND INCREMENTED TIMES */
/* Phase incrementation for hypercomplex 2D data, States-Haberkorn element */
if (phase1 == 1) icosel = -1;
else { tsadd(t3,2,4); icosel = +1; }
/* Set up f1180 */
tau1 = d2;
if((f1180[A] == 'y') && (ni > 1.0))
{ tau1 += ( 1.0 / (2.0*sw1) ); if(tau1 < 0.2e-6) tau1 = 0.0; }
tau1 = tau1/2.0;
/* Calculate modifications to phases for States-TPPI acquisition */
if( ix == 1) d2_init = d2;
t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
if(t1_counter % 2)
{ tsadd(t1,2,4); tsadd(t4,2,4); }
kappa = tCN>ni/sw1? 1:tCN/(ni/sw1);
kappa = ((double)((int)(kappa*1000)))/1000;
/* 3 digits after the point, may cause a small decrease in value for safe boundary */
printf("kappa = %f\n", kappa);
/* BEGIN PULSE SEQUENCE */
status(A);
obspower(tpwr);
decpower(pwClvl);
decpwrf(rf0);
dec2power(pwNlvl);
txphase(zero);
decphase(zero);
dec2phase(zero);
delay(d1);
/* xxxxxxxxxxxxxxxxx CONSTANT SAMPLE HEATING FROM N15 RF xxxxxxxxxxxxxxxxx */
/* xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx */
rcvroff();
/*dec2rgpulse(pwN, zero, 0.0, 0.0); */ /*destroy N15 magnetization*/
zgradpulse(gzlvl0, 0.5e-3);
delay(1.0e-4);
/*dec2rgpulse(pwN, one, 0.0, 0.0); */
zgradpulse(0.7*gzlvl0, 0.5e-3);
txphase(t1);
delay(5.0e-4);
rgpulse(pw,zero,0.0,0.0); /* 1H pulse excitation */
txphase(zero);
dec2phase(zero);
zgradpulse(gzlvl0, gt0);
delay(lambda - gt0);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero,zero, zero, 0.0, 0.0);
txphase(one);
zgradpulse(gzlvl0, gt0);
delay(lambda - gt0);
rgpulse(pw, three, 0.0, 0.0);
txphase(two);
obspower(tpwrs+6.0);
obspwrf(tpwrsf_n);
shaped_pulse("H2Osinc_n", pwHs, zero, 5.0e-5, 0.0);
obspower(tpwr); obspwrf(4095.0);
zgradpulse(gzlvl3, gt3);
dec2phase(t1);
delay(gstab);
decpwrf(rf8);
dec2rgpulse(pwN, t1, 0.0, 0.0);
txphase(zero);
decphase(zero);
/* xxxxxxxxxxxxxxxxxx OPTIONS FOR N15 EVOLUTION xxxxxxxxxxxxxxxxxxxxx */
txphase(zero);
dec2phase(zero);
/* shared CT for C' Cfilter and N15 chem shift evolution */
delay(tCN/2.0 - kappa*tau1 - gt5 -gstab);
zgradpulse(gzlvl5,gt5);
delay(gstab);
if(Cfilter[A] == 'y' && (1-kappa)*tau1 < pwC8/2) {
sim3shaped_pulse("", "offC8", "", 0.0, pwC8, 2.0*pwN, zero, zero, zero,0.0,0.0);
zgradpulse(gzlvl5,gt5);
delay(tCN/2.0 + (1-kappa)*tau1 -gt5 - pwC3 - pwC8);
}
else if (Cfilter[A] == 'y' && (1-kappa)*tau1 >= pwC8/2){
dec2rgpulse(2.0*pwN,zero,(pwC8-2.0*pwN)/2.0,(pwC8-2.0*pwN)/2.0);
if( (1-kappa)*tau1 >= gt5 +gstab + pwC8/2){
zgradpulse(gzlvl5,gt5);
delay((1-kappa)*tau1 -pwC8/2.0 - gt5);
decshaped_pulse("offC8", pwC8,zero,0.0,0.0);
delay(tCN/2.0 - pwC3 - 1.5*pwC8);
}
else{
delay((1-kappa)*tau1 -pwC8/2.0);
decshaped_pulse("offC8", pwC8,zero,0.0,0.0);
zgradpulse(gzlvl5,gt5);
delay(tCN/2.0 -gt5 - pwC3 - 1.5*pwC8);
}
}
else{
dec2rgpulse(2.0*pwN,zero,(pwC8-2.0*pwN)/2.0,(pwC8-2.0*pwN)/2.0);
zgradpulse(gzlvl5,gt5);
delay(tCN/2.0 + (1-kappa)*tau1 -gt5 - pwC3 - pwC8);
}
decpwrf(rf3);
decshaped_pulse("offC3", pwC3, zero,0.0, 0.0);
decpwrf(rf8);
if(Cfilter[A] == 'y'){
delay(pwC8);
}
else {
decshaped_pulse("offC8", pwC8,zero,0.0,0.0);
}
delay(tau1);
/* gradient for coherence selection and H(z)N(x/y)C(x/y) destruction */
decpwrf(rf6);
if(Cfilter[A] == 'y' ){
decshaped_pulse("offC6", pwC6, zero, 0.0, 0.0);
}
else{
decshaped_pulse("offC6", pwC6, zero, 0.0, 0.0); /*delay(pwC6);*/
}
zgradpulse(gzlvl1, gt1);
dec2phase(t2);
delay(gstab - 2.0*GRADIENT_DELAY);
dec2rgpulse(2.0*pwN, t2, 0.0, 0.0);
delay(gt1+gstab + pwC6);
txphase(three);
txphase(t4);
/* xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx */
sim3pulse(pw,0.0,pwN, zero,zero, t3, 0.0, 0.0);
if (tpwrsf_d<4095.0)
{
obspwrf(tpwrsf_d); obspower(tpwrs+6.0);
shaped_pulse("H2Osinc_d", pwHs, zero, 5.0e-5, 0.0);
obspower(tpwr); obspwrf(4095.0);
}
else
{
obspower(tpwrs);
shaped_pulse("H2Osinc_d", pwHs, zero, 5.0e-5, 0.0);
obspower(tpwr);
}
txphase(zero);
dec2phase(zero);
zgradpulse(gzlvl5, gt5);
delay(lambda - 0.65*(pw + pwN) - gt5 - pwHs - 2.0*POWER_DELAY -2.0*PWRF_DELAY -50.0e-6);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
zgradpulse(gzlvl5, gt5);
txphase(one);
dec2phase(zero);
delay(lambda - 1.3*pwN - gt5);
sim3pulse(pw, 0.0, pwN, one, zero, zero, 0.0, 0.0);
txphase(zero);
dec2phase(zero);
zgradpulse(1.5*gzlvl5, gt5);
delay(lambda - 1.3*pwN - gt5 );
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
dec2phase(one);
zgradpulse(1.5*gzlvl5, gt5);
delay(lambda - 1.6*pwN - gt5);
sim3pulse(pw, 0.0, pwN, one, zero, one, 0.0, 0.0);
delay((gt1/10.0) + 1.0e-4 +gstab - 0.65*pw + 2.0*GRADIENT_DELAY + POWER_DELAY);
rgpulse(2.0*pw, zero, 0.0, 0.0);
dec2power(dpwr2); /* POWER_DELAY */
zgradpulse(icosel*gzlvl2, 0.1*gt1); /* 2.0*GRADIENT_DELAY */
delay(gstab);
rcvron();
statusdelay(C,1.0e-4);
setreceiver(t4);
}
pulsesequence() {
// Define Variables and Objects and Get Parameter Values
double aYxy8 = getval("aYxy8");
double pwYxy8 = getval("pwYxy8");
double nYxy8 = getval("nYxy8");
int cycles = (int) nYxy8/2.0;
nYxy8 = 2.0*cycles;
int counter = (int) (nYxy8 - 1.0);
initval((nYxy8 - 1.0),v8);
double onYxy8 = getval("onYxy8");
double srate = getval("srate");
DSEQ dec = getdseq("H");
strncpy(dec.t.ch,"dec",3);
putCmd("chHtppm='dec'\n");
strncpy(dec.s.ch,"dec",3);
putCmd("chHspinal='dec'\n");
DSEQ mix = getdseq("Hmix");
strncpy(mix.t.ch,"dec",3);
putCmd("chHmixtppm='mix'\n");
strncpy(mix.s.ch,"dec",3);
putCmd("chHmixspinal='mix'\n");
//--------------------------------------
// Copy Current Parameters to Processed
//-------------------------------------
putCmd("groupcopy('current','processed','acquisition')");
// Dutycycle Protection
DUTY d = init_dutycycle();
d.dutyon = getval("pwX90") + 4.0*nYxy8*pwYxy8 + getval("pwX180");
d.dutyoff = d1 + 4.0e-6;
d.c1 = d.c1 + (!strcmp(dec.seq,"tppm"));
d.c1 = d.c1 + ((!strcmp(dec.seq,"tppm")) && (dec.t.a > 0.0));
d.t1 = getval("rd") + getval("ad") + at;
d.c2 = d.c2 + (!strcmp(dec.seq,"spinal"));
d.c2 = d.c2 + ((!strcmp(dec.seq,"spinal")) && (dec.s.a > 0.0));
d.t2 = getval("rd") + getval("ad") + at;
d.c3 = d.c3 + (!strcmp(mix.seq,"tppm"));
d.c3 = d.c3 + ((!strcmp(mix.seq,"tppm")) && (mix.t.a > 0.0));
d.t3 = 2.0*nYxy8*(1.0/srate - 2.0*pwYxy8) + 1.0/srate - getval("pwX180");
d.c4 = d.c4 + (!strcmp(mix.seq,"spinal"));
d.c4 = d.c4 + ((!strcmp(mix.seq,"spinal")) && (mix.s.a > 0.0));
d.t4 = 2.0*nYxy8*(1.0/srate - 2.0*pwYxy8) + 1.0/srate - getval("pwX180");
d = update_dutycycle(d);
abort_dutycycle(d,10.0);
// Set Phase Tables
settable(phX90,4,table1);
settable(ph1Yxy8,8,table2);
settable(ph2Yxy8,4,table3);
settable(phX180,4,table4);
settable(phRec,4,table5);
if (counter < 0) tsadd(phRec,2,4);
setreceiver(phRec);
// Begin Sequence
txphase(phX90); decphase(zero);
obspwrf(getval("aX90"));
obsunblank(); decunblank(); _unblank34();
delay(d1);
sp1on(); delay(2.0e-6); sp1off(); delay(2.0e-6);
// X Single Pulse
rgpulse(getval("pwX90"),phX90,0.0,0.0);
// xy8Y Period One
obspwrf(getval("aX180"));
txphase(phX180);
if (counter >= 0) {
_dseqon(mix);
delay(pwYxy8/2.0);
dec2pwrf(aYxy8);
sub(v1,v1,v1);
if (counter >= 1) {
if (counter > 1) loop(v8,v9);
getelem(ph1Yxy8,v1,v4);
incr(v1);
getelem(ph2Yxy8,ct,v2);
add(v4,v2,v2);
dec2phase(v2);
delay(0.5/srate - pwYxy8);
if (onYxy8 == 2)
dec2rgpulse(pwYxy8,v2,0.0,0.0);
else
delay(pwYxy8);
if (counter > 1) endloop(v9);
}
// X Refocussing Pulse
delay(0.5/srate - pwYxy8/2.0 - getval("pwX180")/2.0);
rgpulse(getval("pwX180"),phX180,0.0,0.0);
dec2pwrf(aYxy8);
delay(0.5/srate - pwYxy8/2.0 - getval("pwX180")/2.0);
// xy8Y Period Two
if (counter >= 1) {
if (counter > 1) loop(v8,v9);
if (onYxy8 == 2)
dec2rgpulse(pwYxy8,v2,0.0,0.0);
else
delay(pwYxy8);
getelem(ph1Yxy8,v1,v4);
incr(v1);
getelem(ph2Yxy8,ct,v2);
add(v4,v2,v2);
dec2phase(v2);
delay(0.5/srate - pwYxy8);
if (counter > 1) endloop(v9);
}
delay(pwYxy8/2.0);
_dseqoff(mix);
}
// Begin Acquisition
_dseqon(dec);
obsblank(); _blank34();
delay(getval("rd"));
startacq(getval("ad"));
acquire(np, 1/sw);
endacq();
_dseqoff(dec);
obsunblank(); decunblank(); _unblank34();
}
pulsesequence()
{
/* DECLARE VARIABLES */
char f1180[MAXSTR],f2180[MAXSTR],f3180[MAXSTR],
mag_flg[MAXSTR], flipback[MAXSTR];
int ni2, ni3, phase, phase2, phase3, icosel,t1_counter, t2_counter, t3_counter;
double
tofhn, /* adjust carrier to the center of amide protons */
tauxh, /* 1 / 4J(NH) */
pwN, /* PW90 for N-nuc */
pwNlvl, /* power level for N hard pulses */
jnh, /* coupling for NH */
gzcal = getval("gzcal"),
compH = getval("compH"),
tau1,
tau2,
tau3,
sw1,
sw2,
sw3,
flippw, /* pw for selective pulse at flippwr */
flippwr,
fliphase,
mix,
gzlvl0,
gt0,
gzlvl1,
gt1,
gzlvl2,
gt7,
gzlvl3,
gt3,
gzlvl4,
gt4,
gzlvl5,
gt5,
gzlvl6,
gt6,
gzlvl7,
gstab;
/* LOAD VARIABLES */
tofhn = getval("tofhn");
sw1 = getval("sw1");
sw2 = getval("sw2");
sw3 = getval("sw3");
ni = getval("ni");
ni2 = getval("ni2");
ni3 = getval("ni3");
phase = (int)(getval("phase") + 0.5);
phase2 = (int)(getval("phase2") + 0.5);
phase3 = (int)(getval("phase3") + 0.5);
jnh = getval("jnh");
pwN = getval("pwN");
pwNlvl = getval("pwNlvl");
gstab = getval("gstab");
flippw = getval("flippw");
fliphase = getval("fliphase");
mix = getval("mix");
gt0 = getval("gt0");
gt1 = getval("gt1");
gt7 = getval("gt7");
gt3 = getval("gt3");
gt4 = getval("gt4");
gt5 = getval("gt5");
gt6 = getval("gt6");
gzlvl0 = getval("gzlvl0");
gzlvl1 = getval("gzlvl1");
gzlvl2 = getval("gzlvl2");
gzlvl3 = getval("gzlvl3");
gzlvl4 = getval("gzlvl4");
gzlvl5 = getval("gzlvl5");
gzlvl6 = getval("gzlvl6");
gzlvl7 = getval("gzlvl7");
getstr("mag_flg", mag_flg);
getstr("f1180",f1180);
getstr("f2180", f2180);
getstr("f3180", f3180);
getstr("flipback",flipback);
/* check validity of parameter range */
if( dpwr > 50 )
{
printf("don't fry the probe, dpwr too large! ");
psg_abort(1);
}
if ( dm2[A] == 'y' || dm2[B] == 'y' || dm2[C] == 'y' )
{ printf("incorrect dec2 decoupler flags! Should be 'nnnn' or 'nnny' "); psg_abort(1);}
if( dpwr2 > 50 )
{
printf("don't fry the probe, dpwr2 too large! ");
psg_abort(1);
}
if(gt0 > 15.0e-3 || gt1 > 15.0e-3 || gt7 > 15.0e-3 || gt3 > 15.0e-3 || gt4 > 15.0e-3 || gt5 > 15.0e-3)
{
printf("gti must be less than 15 ms \n");
psg_abort(1);
}
/* LOAD VARIABLES */
settable(t1, 2, phi1);
settable(t2, 4, phi2);
settable(t3, 1, phi3);
settable(t4, 8, phi4);
settable(t5, 1, phi5);
settable(t6, 8, rec);
/* INITIALIZE VARIABLES */
tauxh = ((jnh != 0.0) ? 1/(4*(jnh)) : 2.35e-3);
/* Phase incrementation for hypercomplex data */
if (phase == 2)
{
tsadd(t1, 1, 4);
}
if (phase2 == 2)
{
tsadd(t2, 1, 4);
}
if ( phase3 == 1 )
{
tsadd(t5, 2, 4);
icosel = 1;
}
else icosel = -1;
/* calculate modification to phases based on current t1 values
to achieve States-TPPI acquisition */
if(ix == 1) d2_init = d2;
t1_counter = (int)((d2-d2_init)*sw1 + 0.5);
if(t1_counter %2)
{
tsadd(t1,2,4);
tsadd(t6,2,4);
}
if(ix == 1) d3_init = d3;
t2_counter = (int)((d3-d3_init)*sw2 + 0.5);
if(t2_counter %2)
{
tsadd(t2,2,4);
tsadd(t6,2,4);
}
if(ix == 1) d4_init = d4;
t3_counter = (int)((d4-d4_init)*sw3 + 0.5);
if(t3_counter %2)
{
tsadd(t3,2,4);
tsadd(t6,2,4);
}
/* set up so that get (90, -180) phase corrects in F1 if f1180 flag is y */
tau1 = d2;
if(f1180[A] == 'y')
{
tau1 += (1.0/(2.0*sw1));
}
if (tau1 < 0.2e-6) tau1 = 0.0;
tau1 = tau1/2.0;
tau2 = d3 - 2.0*pw - 4.0*pwN/PI;
if(f2180[A] == 'y')
{
tau2 += (1.0/(2.0*sw2));
}
if (tau2 < 0.2e-6) tau2 = 0.0;
tau2 = tau2/2.0;
tau3 = d4;
if(f3180[A] == 'y')
{
tau3 += (1.0/(2.0*sw3));
}
tau3 = tau3/2.0;
flippwr = tpwr - 20.0*log10(flippw/(compH*pw*1.69));
flippwr = (int)(flippwr + 0.4);
if (fliphase < 0.2e-6) fliphase = fliphase + 360.0;
initval(fliphase, v10);
initval(7.0, v9);
obsstepsize(45.0);
/* BEGIN ACTUAL PULSE SEQUENCE */
status(A);
obspower(tpwr);
decpower(dpwr);
dec2power(pwNlvl);
obsoffset(tofhn);
xmtrphase(v9);
delay(d1);
status(B); /* for 13C decoupling during t2, use dm='nynn' or 'nyyn' */
dec2rgpulse(pwN,zero,0.0,2.0e-6);
zgradpulse(gzlvl0,gt0);
rgpulse(pw,t1,1.0e-6,2.0e-6);
zgradpulse(gzlvl6,gt6);
delay(1.9*tauxh - gt1 - 2.0e-6);
dec2rgpulse(pwN, t2, 0.0, 0.0);
delay(tau2);
rgpulse(2.0*pw, t1, 0.0, 0.0);
dec2phase(zero);
delay(tau2);
dec2rgpulse(pwN, zero, 0.0, 0.0);
xmtrphase(zero);
delay(1.9*tauxh - gt6 - 600.0e-6 - SAPS_DELAY);
txphase(zero);
zgradpulse(gzlvl6,gt6);
txphase(zero);
delay(0.6e-3);
if (tau1 > pwN)
{
delay(tau1 - pwN);
dec2rgpulse(2.0*pwN, zero, 0.0, 0.0);
delay(tau1 - pwN);
}
else
{
delay(2.0*tau1);
}
rgpulse(pw, zero, 0.0, 1.0e-6);
status(A); /* no decoupling during mix period */
delay(mix - pwN - 1.5*gt7 - 2.0e-3);
zgradpulse(gzlvl7,gt7);
delay(1.0e-3);
dec2rgpulse(pwN, zero, 0.0, 2.0e-6);
zgradpulse(gzlvl7,gt7/2.0);
delay(1.0e-3 - 2.0e-6);
rgpulse(pw,zero,1.0e-6,2.0e-6);
zgradpulse(gzlvl3,gt3);
delay(tauxh - gt3 - 2.0e-6); /* delay=1/4J(NH) */
sim3pulse(2.0*pw,(double)0.0,2*pwN,zero,zero,zero,0.0,0.0);
txphase(one);
delay(tauxh - gt3 - 500.0e-6); /* delay=1/4J(NH) */
zgradpulse(gzlvl3,gt3);
delay(500.0e-6);
rgpulse(pw, one,0.0,2.0e-6);
obsoffset(tof);
if (flipback[A]=='y')
{
xmtrphase(v10);
obspower(flippwr);
shaped_pulse("H2Osinc",flippw,two,2.0e-6,2.0e-6);
obspower(tpwr);
xmtrphase(zero);
}
zgradpulse(gzlvl4,gt4);
dec2phase(t3);
txphase(zero);
status(C); /* for 13C decoupling during t3 set dm='nnyn' or 'nyyn' */
delay(250.0e-6);
dec2rgpulse(pwN,t3,0.0,0.0);
dec2phase(t4);
delay(tau3);
rgpulse(2.0*pw, zero,0.0,0.0);
delay(tau3);
status(A); /* no decoupling */
if (mag_flg[A] == 'y')
{
delay(4.0*GRADIENT_DELAY);
}
delay(gstab + gt6 + 2.0*GRADIENT_DELAY - 2.0*pw - PRG_STOP_DELAY);
dec2rgpulse(2.0*pwN,t4,0.0,0.0);
dec2phase(t5);
if (mag_flg[A] == 'y')
{
magradpulse(gzcal*gzlvl1, gt1);
}
else
{
zgradpulse(gzlvl1,gt1);
}
delay(gstab);
sim3pulse(pw,0.0e-6,pwN,zero,zero,t5,0.0,0.0);
txphase(zero);
dec2phase(zero);
if (gt5 > 0.2e-6)
{
zgradpulse(gzlvl5, 1.3*gt5);
}
delay(tauxh - 1.3*gt5);
sim3pulse(2.0*pw,(double)0.0,2*pwN,zero,zero,zero,0.0,0.0);
txphase(one); dec2phase(one);
delay(tauxh - 1.3*gt5 - 500.0e-6);
if (gt5 > 0.2e-6)
{
zgradpulse(gzlvl5, 1.3*gt5);
}
delay(500.0e-6);
sim3pulse(pw,(double)0.0,pwN,one,zero,one,0.0,0.0);
dec2phase(zero); txphase(zero);
if (gt5 > 0.2e-6)
{
zgradpulse(gzlvl5,gt5);
}
delay(tauxh - gt5);
sim3pulse(2.0*pw,(double)0.0,2*pwN,zero,zero,zero,0.0,0.0);
dec2power(dpwr2);
delay(tauxh - 3.0*POWER_DELAY - gt5 - 500.0e-6);
if (gt5 > 0.2e-6)
{
zgradpulse(gzlvl5,gt5);
}
delay(500.0e-6);
rgpulse(pw,zero,0.0,0.0);
if(mag_flg[A] == 'y')
{
delay(4.0*GRADIENT_DELAY);
}
delay(gstab + gt1/10.0 + 2.0*GRADIENT_DELAY);
rgpulse(2.0*pw,zero,0.0,0.0);
if(mag_flg[A] == 'y')
{
magradpulse(icosel*icosel*gzcal*gzlvl2, gt1/10.0);
}
else
{
zgradpulse(icosel*gzlvl2,gt1/10.0);
}
delay(gstab);
status(D);
setreceiver(t6);
}
pulsesequence()
{
/* DECLARE AND LOAD VARIABLES; parameters used in the last half of the */
/* sequence are declared and initialized as 0.0 in bionmr.h, and */
/* reinitialized below */
char f1180[MAXSTR], /* Flag to start t1 @ halfdwell */
f2180[MAXSTR], /* Flag to start t2 @ halfdwell */
stCshape[MAXSTR],
TROSY[MAXSTR]; /* do TROSY on N15 and H1 */
int t1_counter, /* used for states tppi in t1 */
t2_counter, /* used for states tppi in t2 */
ni = getval("ni"),
ni2 = getval("ni2");
double d2_init=0.0, /* used for states tppi in t1 */
d3_init=0.0, /* used for states tppi in t2 */
tau1, /* t1 delay */
tauCH = getval("tauCH"), /* 1/4J delay for CH */
timeTN = getval("timeTN"), /* constant time for 15N evolution */
timeNCA = getval("timeNCA"),
timeC = getval("timeC"), /* other delays */
tauCC = getval("tauCC"),
zeta = getval("zeta"),
pwClvl = getval("pwClvl"), /* coarse power for C13 pulse */
pwC = getval("pwC"), /* C13 90 degree pulse length at pwClvl */
compC = getval("compC"),
rf0,
rfst,
widthHd,
pwS1, /* length of square 90 on Cab */
pwS2, /* length of square 180 on Ca */
phi7cal = getval("phi7cal"), /* phase in degrees of the last C13 90 pulse */
phshift = getval("phshift"), /* phase shift induced on CO by 180 on CA in middle of t1 */
pwNlvl = getval("pwNlvl"), /* power for N15 pulses */
pwN = getval("pwN"), /* N15 90 degree pulse length at pwNlvl */
sw1 = getval("sw1"),
sw2 = getval("sw2"),
waltzB1 = getval("waltzB1"),
gt0 = getval("gt0"), /* other gradients */
gt3 = getval("gt3"),
gt4 = getval("gt4"),
gzlvl0 = getval("gzlvl0"),
gzlvl3 = getval("gzlvl3"),
gzlvl4 = getval("gzlvl4");
getstr("f1180",f1180);
getstr("f2180",f2180);
getstr("TROSY",TROSY);
widthHd=2.069*(waltzB1/sfrq); /* produces same field as std. sequence */
/* LOAD PHASE TABLE */
settable(t1,2,phi1);
settable(t2,4,phi2);
settable(t4,1,phx);
if (TROSY[A]=='y')
{settable(t8,1,phy);
settable(t9,1,phx);
settable(t10,1,phy);
settable(t11,1,phx);
settable(t12,4,recT);}
else
{settable(t8,1,phx);
settable(t9,16,phi9);
settable(t10,1,phx);
settable(t11,1,phy);
settable(t12,8,rec);}
/* INITIALIZE VARIABLES */
kappa = 5.4e-3;
lambda = 2.4e-3;
/* maximum fine power for pwC pulses (and initialize rfst) */
rf0 = 4095.0; rfst=0.0;
if( pwC > 20.0*600.0/sfrq )
{ printf("increase pwClvl so that pwC < 20*600/sfrq");
psg_abort(1); }
/* 30 ppm sech/tanh inversion for Ca-Carbons */
rfst = (compC*4095.0*pwC*4000.0*sqrt((4.5*sfrq/600.0+3.85)/0.41));
rfst = (int) (rfst + 0.5);
strcpy(stCshape, "stC30");
/* get calculated pulse lengths of shaped C13 pulses */
pwS1 = c13pulsepw("co", "ca", "sinc", 90.0);
pwS2 = c13pulsepw("ca", "co", "square", 180.0);
/* CHECK VALIDITY OF PARAMETER RANGES */
if ( gt4 > zeta - 0.6*pwC)
{ printf(" gt4 is too big. Make gt4 equal to %f or less.\n",
(zeta - 0.6*pwC)); psg_abort(1);}
if ( 0.5*ni*1/(sw1) > 2.0*timeC + tauCC - OFFSET_DELAY - SAPS_DELAY)
{ printf(" ni is too big. Make ni equal to %d or less.\n",
((int)((2.0*timeC - OFFSET_DELAY)*2.0*sw1))); psg_abort(1);}
if ( dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y' )
{ printf("incorrect dec1 decoupler flags! Should be 'nnn' "); psg_abort(1);}
if ( dm2[A] == 'y' || dm2[B] == 'y' )
{ printf("incorrect dec2 decoupler flags! Should be 'nny' "); psg_abort(1);}
if ( dm3[A] == 'y' || dm3[C] == 'y' )
{ printf("incorrect dec3 decoupler flags! Should be 'nyn' or 'nnn' ");
psg_abort(1);}
if ( dpwr2 > 46 )
{ printf("dpwr2 too large! recheck value "); psg_abort(1);}
if ( pw > 20.0e-6 )
{ printf(" pw too long ! recheck value "); psg_abort(1);}
if ( pwN > 100.0e-6 )
{ printf(" pwN too long! recheck value "); psg_abort(1);}
if ( TROSY[A]=='y' && dm2[C] == 'y' )
{ text_error("Choose either TROSY='n' or dm2='n' ! "); psg_abort(1);}
/* PHASES AND INCREMENTED TIMES */
/* Phase incrementation for hypercomplex 2D data, States-Haberkorn element */
if (phase1 == 2) tsadd(t2,1,4);
if (TROSY[A]=='y')
{ if (phase2 == 2) icosel = +1;
else {tsadd(t4,2,4); tsadd(t10,2,4); icosel = -1;}
}
else { if (phase2 == 2) {tsadd(t10,2,4); icosel = +1;}
else icosel = -1;
}
/* C13 TIME INCREMENTATION and set up f1180 */
/* Set up f1180 */
tau1 = d2;
if((f1180[A] == 'y') && (ni > 1.0))
{ tau1 += ( 1.0 / (2.0*sw1) ); if(tau1 < 0.2e-6) tau1 = 0.0; }
tau1 = tau1/2.0;
/* Set up f2180 */
tau2 = d3;
if((f2180[A] == 'y') && (ni2 > 1.0))
{ tau2 += ( 1.0 / (2.0*sw2) ); if(tau2 < 0.2e-6) tau2 = 0.0; }
tau2 = tau2/2.0;
/* Calculate modifications to phases for States-TPPI acquisition */
if( ix == 1) d2_init = d2;
t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
if(t1_counter % 2)
{ tsadd(t2,2,4); tsadd(t12,2,4); }
if( ix == 1) d3_init = d3;
t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
if(t2_counter % 2)
{ tsadd(t8,2,4); tsadd(t12,2,4); }
/* BEGIN PULSE SEQUENCE */
status(A);
delay(d1);
if (dm3[B]=='y') lk_hold();
rcvroff();
set_c13offset("ca");
obsoffset(tof);
obspower(tpwr);
obspwrf(4095.0);
decpower(pwClvl);
decpwrf(4095.0);
dec2power(pwNlvl);
txphase(three);
delay(1.0e-5);
dec2rgpulse(pwN, zero, 0.0, 0.0); /*destroy N15 and C13 magnetization*/
decrgpulse(pwC, zero, 0.0, 0.0);
zgradpulse(gzlvl0, 0.5e-3);
delay(1.0e-4);
dec2rgpulse(pwN, one, 0.0, 0.0);
decrgpulse(pwC, zero, 0.0, 0.0);
zgradpulse(0.7*gzlvl0, 0.5e-3);
delay(5.0e-4);
if(dm3[B] == 'y') /*optional 2H decoupling on */
{dec3unblank(); dec3rgpulse(1/dmf3, one, 0.0, 0.0);
dec3unblank(); setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);}
rgpulse(pw, zero, 0.0, 0.0); /* 1H pulse excitation */
txphase(zero);
decphase(zero);
zgradpulse(gzlvl0, gt0); /* 2.0*GRADIENT_DELAY */
decpwrf(rfst);
delay(tauCH - gt0 - WFG2_START_DELAY - 0.5e-3 + 70.0e-6);
simshaped_pulse("",stCshape, 2.0*pw, 1.0e-3, zero, zero, 0.0, 0.0);
delay(tauCH - gt0 - 0.5e-3 + 70.0e-6 - 150.0e-6);
decpwrf(rf0);
zgradpulse(gzlvl0, gt0); /* 2.0*GRADIENT_DELAY */
delay(150.0e-6);
rgpulse(pw, one, 0.0, 0.0);
zgradpulse(gzlvl3, gt3);
delay(2.0e-4);
decrgpulse(pwC, t1, 0.0, 0.0);
set_c13offset("co");
delay(zeta - 0.6*pwC - OFFSET_DELAY - POWER_DELAY - PWRF_DELAY - PRG_START_DELAY);
h1decon("DIPSI2", widthHd, 0.0); /*POWER_DELAY+PWRF_DELAY+PRG_START_DELAY */
delay(2.0*timeC - zeta);
c13pulse("co", "ca", "sinc", 90.0, t2, 0.0, 0.0); /* pwS1 */
delay(timeNCA - tau1);
c13pulse("ca", "co", "sinc", 180.0, zero, 2.0e-6, 2.0e-6);
sim3_c13pulse("", "co", "ca", "square", "", 0.0, 180.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0); /* pwS2 */
delay(timeNCA + tau1 + (60.0e-6));
initval(phshift, v3);
decstepsize(1.0);
dcplrphase(v3);
c13pulse("co", "ca", "sinc", 90.0, one, 0.0, 0.0); /* pwS1 */
delay(2.0*timeC + tauCC - OFFSET_DELAY - SAPS_DELAY - tau1);
c13pulse("ca", "co", "sinc", 180.0, zero, 0.0, 0.0);
delay(tauCC);
sim3_c13pulse("", "co", "ca", "square", "", 0.0, 180.0, 2.0*pwN, zero, zero, zero, 0.0, 60.0e-6);
delay(tau1);
set_c13offset("ca");
initval(phi7cal, v7);
decstepsize(1.0);
dcplrphase(v7); /* SAPS_DELAY */
dec2phase(t8);
nh_evol_se_train("ca", "co"); /* common part of sequence in bionmr.h */
if (dm3[B] == 'y') lk_sample();
}
void pulsesequence()
{
char codec[MAXSTR], codecseq[MAXSTR];
int icosel, t1_counter;
double d2_init = 0.0,
rf0 = 4095, rf200, pw200,
copwr, codmf, cores, copwrf,
tpwrs,
pwHs = getval("pwHs"),
compH = getval("compH"),
pwClvl = getval("pwClvl"),
pwC = getval("pwC"),
compC = getval("compC"),
pwNlvl = getval("pwNlvl"),
pwN = getval("pwN"),
sw1 = getval("sw1"),
swH = getval("swH"),
swC = getval("swC"),
swN = getval("swN"),
swTilt,
angle_H = getval("angle_H"),
angle_C = getval("angle_C"),
angle_N,
cos_H,
cos_C,
cos_N,
mix = getval("mix"),
tauCH = getval("tauCH"), /* 1/4JCH */
tauNH = getval("tauNH"), /* 1/4JNH */
tau1, tau2, tau3,
tofali =getval("tofali"), /* aliphatic protons offset */
dofcaco =getval("dofcaco"), /* offset for caco decoupling, ~120 ppm */
dof = getval("dof"),
gstab = getval("gstab"),
gt0 = getval("gt0"), gzlvl0 = getval("gzlvl0"),
gt1 = getval("gt1"), gzlvl1 = getval("gzlvl1"),
gzlvl2 = getval("gzlvl2"),
gt3 = getval("gt3"), gzlvl3 = getval("gzlvl3"),
gt4 = getval("gt4"), gzlvl4 = getval("gzlvl4"),
gt5 = getval("gt5"), gzlvl5 = getval("gzlvl5"),
gt6 = getval("gt6"), gzlvl6 = getval("gzlvl6"),
gt7 = getval("gt7"), gzlvl7 = getval("gzlvl7"),
gt8 = getval("gt8"), gzlvl8 = getval("gzlvl8"),
gt9 = getval("gt9"), gzlvl9 = getval("gzlvl9");
/* LOAD VARIABLES */
copwr = getval("copwr"); copwrf = getval("copwrf");
codmf = getval("codmf"); cores = getval("cores");
getstr("codecseq", codecseq); getstr("codec", codec);
/* Load phase cycling variables */
settable(t1, 4, phi1); settable(t2, 2, phi2); settable(t3, 1, phi3);
settable(t4, 8, phi4); settable(t5, 1, phi5); settable(t14, 2, phi14);
settable(t11, 8, rec);
angle_N=0.0; cos_N=0.0;
/* activate auto-calibration flags */
setautocal();
if (autocal[0] == 'n')
{
/* 180 degree adiabatic C13 pulse from 0 to 200 ppm */
pw200 = getval("pw200");
rf200 = (compC*4095.0*pwC*4000.0*sqrt((30.0*sfrq/600.0+7.0)/0.35));
rf200 = (int) (rf200 + 0.5);
if (1.0/(4000.0*sqrt((30.0*sfrq/600.0+7.0)/0.35)) < pwC )
{ text_error( " Not enough C13 RF. pwC must be %f usec or less.\n",
(1.0e6/(4000.0*sqrt((30.0*sfrq/600.0+7.0)/0.35))) );
psg_abort(1); }
}
else /* if autocal = 'y'(yes), 'q'(quiet), r(read), or 's'(semi) */
{
strcpy(codecseq,"Pdec_154p");
if(FIRST_FID) /* call Pbox */
{
ppm = getval("dfrq");
bw = 200.0*ppm; pws = 0.001; ofs = 0.0; nst = 1000;
/* 1 ms long pulse, nst: number of steps */
stC200 = pbox_makeA("stC200", "sech", bw, pws, ofs, compC*pwC, pwClvl, nst);
bw=20.0*ppm; ofs=154*ppm;
Pdec_154p = pbox_Dsh("Pdec_154p", "WURST2", bw, ofs, compC*pwC, pwClvl);
}
rf200 = stC200.pwrf; pw200 = stC200.pw;
}
/* selective H20 one-lobe sinc pulse */
tpwrs = tpwr - 20.0*log10(pwHs/(compH*pw*1.69));
tpwrs = (int)(tpwrs+0.5);
/* check validity of parameter range */
if((dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y'))
{ printf("incorrect Dec1 decoupler flags! "); psg_abort(1); }
if((dm2[A] == 'y' || dm2[B] == 'y'))
{ printf("incorrect Dec2 decoupler flags! "); psg_abort(1); }
if ((dpwr > 48) || (dpwr2 > 48))
{ printf("don't fry the probe, dpwr too high! "); psg_abort(1); }
/* set up angles for PR42 experiments */
/* sw1 is used as symbolic index */
if ( sw1 < 1000 ) { printf ("Please set sw1 to some value larger than 1000.\n"); psg_abort(1); }
if (angle_H < 0 || angle_C < 0 || angle_H > 90 || angle_C > 90 )
{ printf("angles must be set between 0 and 90 degree.\n"); psg_abort(1); }
cos_H = cos (PI*angle_H/180); cos_C = cos (PI*angle_C/180);
if ( (cos_H*cos_H + cos_C*cos_C) > 1.0) { printf ("Impossible angle combinations.\n"); psg_abort(1); }
else { cos_N = sqrt(1 - (cos_H*cos_H + cos_C*cos_C) ); angle_N = acos(cos_N)*180/PI; }
if (ix == 1) d2_init = d2;
t1_counter = (int)((d2-d2_init)*sw1 + 0.5);
if(t1_counter % 2) { tsadd(t3,2,4); tsadd(t11,2,4); }
swTilt = swH*cos_H + swC*cos_C + swN*cos_N;
if (phase1 == 1) {;} /* CC */
else if (phase1 == 2) { tsadd(t1, 1, 4); } /* SC */
else if (phase1 == 3) { tsadd(t2, 1, 4); tsadd(t14,1,4); } /* CS */
else if (phase1 == 4) { tsadd(t1, 1, 4); tsadd(t2,1,4); tsadd(t14,1,4); } /* SS */
if ( phase2 == 1 ) { tsadd(t5,2,4); icosel = 1; }
else icosel = -1;
tau1 = 1.0 * t1_counter * cos_H / swTilt;
tau2 = 1.0 * t1_counter * cos_C / swTilt;
tau3 = 1.0 * t1_counter * cos_N / swTilt;
tau1 = tau1/2.0; tau2 = tau2/2.0; tau3 =tau3/2.0;
if (ix ==1 )
{
printf ("Current Spectral Width:\t\t%5.2f\n", swTilt);
printf ("Angle_H: %5.2f \n", angle_H);
printf ("Angle_C: %5.2f \n", angle_C);
printf ("Angle_N: %5.2f \n", angle_N);
printf ("\n\n\n\n\n");
}
/* BEGIN ACTUAL PULSE SEQUENCE */
status(A);
delay(d1);
rcvroff();
obsoffset(tofali); obspower(tpwr); obspwrf(4095.0);
decoffset(dof); decpower(pwClvl); decpwrf(rf0);
dec2offset(dof2); dec2power(pwNlvl); dec2pwrf(4095.0);
if (gt0 > 0.2e-6)
{
decrgpulse(pwC,zero,10.0e-6,0.0);
dec2rgpulse(pwN,zero,2.0e-6,2.0e-6);
zgradpulse(gzlvl0,gt0);
delay(gstab);
}
txphase(t1); decphase(t2); dec2phase(zero);
status(B);
rgpulse(pw,t1,4.0e-6,2.0e-6);
zgradpulse(gzlvl3,gt3);
delay(2.0*tauCH - gt3 - 2.0*GRADIENT_DELAY -4.0e-6);
decrgpulse(pwC,t2,2.0e-6,2.0e-6);
decphase(zero);
/*======= Start of c13 evolution ==========*/
if ( ((tau2 -PRG_START_DELAY - POWER_DELAY -pwN - 2.0*pwC/PI -2.0e-6)> 0)
&& ((tau2 -PRG_STOP_DELAY - POWER_DELAY - pwN - 2.0*pwC/PI -2.0e-6)>0)
&& (codec[A] == 'y') )
{
decpower(copwr); decpwrf(copwrf);
decprgon(codecseq,1/codmf,cores);
decon();
delay(tau2 -PRG_START_DELAY - POWER_DELAY -pwN - 2.0*pwC/PI -2.0e-6);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, t1, zero, zero, 0.0, 0.0);
delay(tau2 -PRG_STOP_DELAY - POWER_DELAY - pwN - 2.0*pwC/PI -2.0e-6);
decoff();
decprgoff();
}
else if ( (tau2 -pwN - 2.0*pwC/PI -2.0e-6) > 0)
{
delay(tau2 -pwN - 2.0*pwC/PI -2.0e-6);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, t1, zero, zero, 0.0, 0.0);
delay(tau2 -pwN - 2.0*pwC/PI -2.0e-6);
}
else
{
delay(2.0*tau2);
decphase(t14);
delay(4.0e-6);
sim3pulse(2.0*pw, 2.0*pwC, 2.0*pwN, t1, t14, zero, 0.0, 0.0);
delay(4.0e-6);
}
decpower(pwClvl);
decpwrf(rf0);
decphase(zero);
/*======= End of c13 evolution ==========*/
decrgpulse(pwC,zero, 2.0e-6,2.0e-6);
txphase(zero);
delay(2.0*tauCH + tau1 - gt3 - 4.0*pwC
- gstab -4.0e-6 - 2.0*GRADIENT_DELAY);
zgradpulse(gzlvl3,gt3);
delay(gstab);
decrgpulse(pwC,zero,0.0, 0.0);
decphase(one);
decrgpulse(2.0*pwC, one, 0.2e-6, 0.0);
decphase(zero);
decrgpulse(pwC, zero, 0.2e-6, 0.0);
delay(tau1);
rgpulse(pw,zero,2.0e-6,0.0);
/* ===========Beginning of NOE transfer ======= */
delay(mix - gt4 - gt5 - pwN -pwC - 2.0*gstab);
obsoffset(tof);
zgradpulse(gzlvl4,gt4);
delay(gstab);
decrgpulse(pwC, zero, 2.0e-6, 2.0e-6);
dec2rgpulse(pwN, zero, 2.0e-6, 2.0e-6);
zgradpulse(gzlvl5,gt5);
delay(gstab);
/* H2O relaxes back to +z */
/* =========== End of NOE transfer ======= */
rgpulse(pw, zero, 2.0e-6, 2.0e-6);
zgradpulse(gzlvl6,gt6);
delay(tauNH - gt6 - 4.0e-6 - 2.0*GRADIENT_DELAY);
sim3pulse(2.0*pw, 0.0, 2*pwN, zero, zero, zero, 2.0e-6, 2.0e-6);
delay(tauNH - gt6 - gstab -4.0e-6 - 2.0*GRADIENT_DELAY);
zgradpulse(gzlvl6,gt6);
txphase(one);
delay(gstab);
rgpulse(pw,one,2.0e-6,2.0e-6);
txphase(two);
obspower(tpwrs);
shaped_pulse("H2Osinc", pwHs, two, 2.0e-6, 2.0e-6);
obspower(tpwr);
zgradpulse(gzlvl7,gt7);
dec2phase(t3);
decoffset(dofcaco); /* offset on 120ppm for CaCO decoupling */
decpwrf(rf200); /* fine power for stC200 */
delay(gstab);
dec2rgpulse(pwN,t3,2.0e-6,2.0e-6);
dec2phase(t4);
delay(tau3);
rgpulse(2.0*pw, zero, 2.0e-6, 2.0e-6);
decshaped_pulse("stC200", 1.0e-3, zero, 2.0e-6, 2.0e-6);
delay(tau3);
delay(gt1 +gstab +8.0e-6 - 1.0e-3 - 2.0*pw);
dec2rgpulse(2.0*pwN, t4, 2.0e-6, 2.0e-6);
dec2phase(t5);
zgradpulse(gzlvl1, gt1);
delay(gstab + WFG_START_DELAY + WFG_STOP_DELAY - 2.0*GRADIENT_DELAY);
sim3pulse(pw, 0.0, pwN, zero, zero, t5, 2.0e-6, 2.0e-6);
dec2phase(zero);
zgradpulse(gzlvl8, gt8);
delay(tauNH - gt8 - 2.0*GRADIENT_DELAY -4.0e-6);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 2.0e-6, 2.0e-6);
delay(tauNH - gt8 - gstab -4.0e-6 - 2.0*GRADIENT_DELAY);
zgradpulse(gzlvl8, gt8);
txphase(one); dec2phase(one);
delay(gstab);
sim3pulse(pw, 0.0, pwN, one, zero, one, 2.0e-6, 2.0e-6);
txphase(zero); dec2phase(zero);
zgradpulse(gzlvl9, gt9);
delay(tauNH - gt9 - 2.0*GRADIENT_DELAY -4.0e-6);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 2.0e-6, 2.0e-6);
delay(tauNH - gt9 - 2.0*GRADIENT_DELAY -gstab -4.0e-6);
zgradpulse(gzlvl9, gt9);
delay(gstab);
rgpulse(pw, zero, 2.0e-6, 2.0e-6);
delay((gt1/10.0) +gstab -2.0e-6 - 0.5*pw + 2.0*GRADIENT_DELAY + POWER_DELAY);
rgpulse(2.0*pw, zero, 2.0e-6, 2.0e-6);
zgradpulse(icosel*gzlvl2, gt1/10.0);
dec2power(dpwr2);
delay(gstab);
status(C);
setreceiver(t11);
}
pulsesequence()
{
char f1180[MAXSTR], /* Flag to start t1 @ halfdwell */
f2180[MAXSTR], /* Flag to start t1 @ halfdwell */
CCdseq[MAXSTR],
CChomodec[MAXSTR], /* Setup for C-imino - C-H6 */
pwC_Sel_Shape[MAXSTR], /* Selective C 180 refocusing pulse */
pwH_Sel_Shape[MAXSTR]; /* Selective H 180 refocusing pulse */
int icosel, /* used to get n and p type */
t1_counter, /* used for states tppi in t1 */
ni2 = getval("ni2"),
t2_counter; /* used for states tppi in t2 */
double tau1, /* t1 delay */
tau2, /* t2 delay */
CCdpwr = getval("CCdpwr"), /* power level for CC decoupling */
CCdres = getval("CCdres"), /* dres for CC decoupling */
CCdmf = getval("CCdmf"), /* dmf for CC decoupling */
lambda = 1.0/(4*getval("JCH")), /* 1/4J H1 evolution delay */
taucc = 1.0/(4*getval("JCC")), /* 1/4J CC evolution delay */
delta_cc = 1.0/(4*getval("JCC")), /* 1/4J CC evolution delay */
pwH_Sel_pw = getval("pwH_Sel_pw"), /* 180 Pulse selective pulse*/
pwH_Sel_lvl = getval("pwH_Sel_lvl"), /* 180 Pulse selective pulse power level*/
pwC_Sel_pw = getval("pwC_Sel_pw"), /* 180 C Pulse selective pulse*/
pwC_Sel_lvl = getval("pwC_Sel_lvl"), /* 180 C Pulse selective pulse power level*/
pwClvl = getval("pwClvl"), /* coarse power for C13 pulse */
pwC = getval("pwC"), /* C13 90 degree pulse length at pwClvl */
calC = getval("calC"), /* multiplier on a pwC pulse for calibration */
dofa,
calH = getval("calH"), /* multiplier on a pw pulse for H1 calibration */
pwNlvl = getval("pwNlvl"), /* power for N15 pulses */
pwN = getval("pwN"), /* N15 90 degree pulse length at pwNlvl */
sw1 = getval("sw1"),
gstab = getval("gstab"), /* Gradient recovery delay, probe-dependent */
gt1 = getval("gt1"), /* coherence pathway gradients */
gzlvl1 = getval("gzlvl1"),
gzlvl2 = getval("gzlvl2"),
gt3 = getval("gt3"),
gt4 = getval("gt4"),
gt5 = getval("gt5"),
gzlvl0 = getval("gzlvl0"),
gzlvl3 = getval("gzlvl3"),
gzlvl4 = getval("gzlvl4"),
gzlvl5 = getval("gzlvl5"),
gzlvl6 = getval("gzlvl6");
getstr("f1180",f1180);
getstr("CCdseq",CCdseq);
getstr("CChomodec",CChomodec);
getstr("f2180",f2180);
getstr("pwH_Sel_Shape",pwH_Sel_Shape);
getstr("pwC_Sel_Shape",pwC_Sel_Shape);
/* LOAD PHASE TABLE */
settable(t1,8,phi1);
settable(t2,4,phi2);
settable(t3,2,phi3);
settable(t4,1,phi4);
settable(t5,1,phi5);
settable(t6,1,phi6);
settable(t9,16,phi9);
settable(t11,16,rec);
/* reset calH and calC if the user forgets */
if (ni>1.0)
{
calH=1.0; calC=1.0;
}
/* CHECK VALIDITY OF PARAMETER RANGES */
if ((ni/sw1) > (4*taucc - 2*gt4))
{ text_error( " ni is too big. Make ni equal to %d or less.\n",
((int)((4*taucc - 2*gt4)*sw1)) ); psg_abort(1); }
if((dm2[A] == 'y' || dm2[B] == 'y'))
{ text_error("incorrect dec2 decoupler flags! Should be 'nnn' or 'nny' "); psg_abort(1); }
if((dm[A] == 'y' || dm[B] == 'y'))
{ text_error("incorrect dec1 decoupler flags! Should be 'nny' "); psg_abort(1); }
if( dpwr > 49 )
{ text_error("don't fry the probe, DPWR too large! "); psg_abort(1); }
if( dpwr2 > 47 )
{ text_error("don't fry the probe, DPWR2 too large! "); psg_abort(1); }
if( (pw > 20.0e-6) && (tpwr > 56) )
{ text_error("don't fry the probe, pw too high ! "); psg_abort(1); }
if( (pwC > 40.0e-6) && (pwClvl > 56) )
{ text_error("don't fry the probe, pwN too high ! "); psg_abort(1); }
if( (pwN > 100.0e-6) && (pwNlvl > 56) )
{ text_error("don't fry the probe, pwN too high ! "); psg_abort(1); }
if ( ni/sw1 > 4.0*taucc)
{ text_error( " ni is too big. Make ni equal to %d or less.\n",
((int)(4*taucc*sw1)) ); psg_abort(1); }
/* PHASES AND INCREMENTED TIMES */
/* Phase incrementation for hypercomplex 2D data, States-Haberkorn element */
icosel=1;
if (phase1 == 2)
{
tsadd(t1,1,4);
tsadd(t4,1,4);
tsadd(t5,1,4);
}
if (phase2 == 2)
{
tsadd(t6,2,4);
icosel = -1;
}
else icosel = 1;
/* Set up f1180 */
tau1 = d2;
if((f1180[A] == 'y') && (ni > 1.0))
{
tau1 += ( 1.0 / (2.0*sw1) );
if(tau1 < 0.2e-6) tau1 = 0.0;
}
tau1 = tau1/2.0;
/* Set up f2180 */
tau2 = d3;
if((f2180[A] == 'y') && (ni2 > 1.0))
{
tau2 += ( 1.0 / (2.0*sw2) );
if(tau2 < 0.2e-6) tau2 = 0.0;
}
tau2 = tau2/2.0;
/* Calculate modifications to phases for States-TPPI acquisition */
if( ix == 1) d2_init = d2;
t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
if(t1_counter % 2)
{
tsadd(t1,2,4);
tsadd(t4,2,4);
tsadd(t5,2,4);
tsadd(t11,2,4);
}
/* Calculate modifications to phases for States-TPPI acquisition */
if( ix == 1) d3_init = d3;
t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
/* BEGIN PULSE SEQUENCE */
status(A);
dofa = dof - 35.0*dfrq; /*start at C2' */
obspower(tpwr);
decpower(pwClvl);
dec2power(pwNlvl);
obsoffset(tof);
decoffset(dofa);
dec2offset(dof2);
txphase(zero);
decphase(zero);
dec2phase(zero);
delay(d1);
rcvroff();
status(B);
dec2rgpulse(pwN, zero, 0.0, 0.0); /*destroy N15 and C13 magnetization*/
decrgpulse(pwC, zero, 0.0, 0.0);
zgradpulse(gzlvl0, 0.5e-3);
delay(gstab/2);
dec2rgpulse(pwN, one, 0.0, 0.0);
decrgpulse(pwC, one, 0.0, 0.0);
zgradpulse(0.7*gzlvl0, 0.5e-3);
delay(5.0e-4);
rgpulse(calH*pw,zero,0.0,0.0); /* 1H pulse excitation */
decphase(t4);
delay(2.0*lambda);
decrgpulse(calC*pwC, t4, 0.0, 0.0);
zgradpulse(gzlvl3, gt3);
obspower(pwH_Sel_lvl);
decphase(zero);
delay(taucc -lambda - gt3 - WFG2_START_DELAY - pwH_Sel_pw/2.0 + 70.0e-6);
shaped_pulse(pwH_Sel_Shape, pwH_Sel_pw, zero, 0.0, 0.0);
delay(lambda - pwH_Sel_pw/2.5);
decrgpulse(2.0*pwC, t1, 0.0, 0.0);
zgradpulse(gzlvl3, gt3);
obspower(tpwr);
decphase(t5);
txphase(t2);
delay(taucc - gt3);
simpulse(pw, pwC, t2, t5, 0.0, 0.0);
zgradpulse(gzlvl4, gt4); /* 2.0*GRADIENT_DELAY */
txphase(zero);
decphase(t3);
delay(2*taucc + tau1 - gt4);
decrgpulse(2.0*pwC, t3, 0.0, 0.0);
zgradpulse(gzlvl4, gt4); /* 2.0*GRADIENT_DELAY */
decphase(zero);
delay(2.0*taucc - tau1 - gt4);
dofa = dof - 17.5*dfrq; /*change to C1' */
decoffset(dofa);
/* ffffffffffffffffffff BEGIN SENSITIVITY ENHANCE fffffffffffffffffffff */
decrgpulse(pwC, zero, 0.0, 0.0);
if (CChomodec[A]=='y')
{
delay(delta_cc);
decrgpulse(2.0*pwC, zero, 0.0, 0.0);
delay(delta_cc);
decpower(CCdpwr); decphase(zero);
decprgon(CCdseq,1.0/CCdmf,CCdres);
decon(); /* CC decoupling on */
delay(tau2);
dec2rgpulse(2.0*pwN, zero, 0.0, 0.0);
delay(tau2);
decoff(); decprgoff(); /* CC decoupling off */
decpower(pwC_Sel_lvl);
zgradpulse(icosel*gzlvl1, gt1/2.0); /* 2.0*GRADIENT_DELAY */
delay(gstab);
decshaped_pulse(pwC_Sel_Shape, pwC_Sel_pw, t9, 0.0, 0.0);
zgradpulse(-1.0*icosel*gzlvl1, gt1/2.0); /* 2.0*GRADIENT_DELAY */
decphase(t6);
decpower(pwClvl);
delay(gstab);
}
else
{
decphase(zero);
zgradpulse(icosel*gzlvl1, gt1/2.0); /* 2.0*GRADIENT_DELAY */
delay(delta_cc + tau2);
decrgpulse(2.0*pwC, t9, 0.0, 0.0);
zgradpulse(-1.0*icosel*gzlvl1, gt1/2.0); /* 2.0*GRADIENT_DELAY */
decphase(t6);
delay(delta_cc - tau2);
}
simpulse(pw, pwC, zero, t6, 0.0, 0.0);
decpower(pwC_Sel_lvl);
decphase(two);
zgradpulse(gzlvl5, gt5);
delay(lambda - pwC_Sel_pw/2.0 - gt5);
simshaped_pulse("",pwC_Sel_Shape, 2.0*pw,pwC_Sel_pw, zero, two, 0.0, 0.0);
decpower(pwClvl);
zgradpulse(gzlvl5, gt5);
txphase(one);
decphase(one);
delay(lambda - pwC_Sel_pw/2.0 - gt5);
simpulse(pw, pwC, one, one, 0.0, 0.0);
decpower(pwC_Sel_lvl);
txphase(zero);
decphase(zero);
zgradpulse(gzlvl6, gt5);
delay(lambda - pwC_Sel_pw/2.0 - gt5);
simshaped_pulse("",pwC_Sel_Shape, 2.0*pw,pwC_Sel_pw, zero, zero, 0.0, 0.0);
zgradpulse(gzlvl6, gt5);
delay(lambda - pwC_Sel_pw/2.0 - gt5);
rgpulse(pw, zero, 0.0, 0.0);
zgradpulse(gzlvl2, gt1/8.0); /* 2.0*GRADIENT_DELAY */
delay(gstab/2-2.0*GRADIENT_DELAY);
rgpulse(2.0*pw, zero, 0.0, 0.0);
decpower(dpwr); /* POWER_DELAY */
dec2power(dpwr2); /* POWER_DELAY */
zgradpulse(-1.0*gzlvl2, gt1/8.0); /* 2.0*GRADIENT_DELAY */
delay(gstab/2 -2.0*POWER_DELAY-2.0*GRADIENT_DELAY);
status(C);
setreceiver(t11);
}
pulsesequence() {
// Define Variables and Objects and Get Parameter Values
DSEQ dec = getdseq("H");
strncpy(dec.t.ch,"dec",3);
putCmd("chHtppm='dec'\n");
strncpy(dec.s.ch,"dec",3);
putCmd("chHspinal='dec'\n");
DSEQ dec2 = getdseq("Y");
strncpy(dec2.t.ch,"dec2",3);
putCmd("chYtppm='dec2'\n");
strncpy(dec2.s.ch,"dec2",3);
putCmd("chYspinal='dec2'\n");
//--------------------------------------
// Copy Current Parameters to Processed
//-------------------------------------
putCmd("groupcopy('current','processed','acquisition')");
// Dutycycle Protection
DUTY d = init_dutycycle();
d.dutyon = getval("pwX90");
d.dutyoff = d1 + 4.0e-6;
d.c1 = d.c1 + (!strcmp(dec.seq,"tppm"));
d.c1 = d.c1 + ((!strcmp(dec.seq,"tppm")) && (dec.t.a > 0.0));
d.t1 = getval("rd") + getval("ad") + at;
d.c2 = d.c2 + (!strcmp(dec.seq,"spinal"));
d.c2 = d.c2 + ((!strcmp(dec.seq,"spinal")) && (dec.s.a > 0.0));
d.t2 = getval("rd") + getval("ad") + at;
if ((d.c1 == -1) && (d.c2 == -1)) {
d.c1 = ((!strcmp(dec2.seq,"tppm")) && (dec2.t.a == 0.0));
d.t1 = getval("rd") + getval("ad") + at;
d.c2 = ((!strcmp(dec2.seq,"spinal")) && (dec2.s.a == 0.0));
d.t2 = getval("rd") + getval("ad") + at;
}
d = update_dutycycle(d);
abort_dutycycle(d,10.0);
// Set Phase Tables
settable(phX90,4,table1);
settable(phRec,4,table2);
setreceiver(phRec);
// Begin Sequence
txphase(phX90); decphase(zero); dec2phase(zero);
obspwrf(getval("aX90"));
obsunblank(); decunblank(); _unblank34();
delay(d1);
sp1on(); delay(2.0e-6); sp1off(); delay(2.0e-6);
// X Direct Polarization
rgpulse(getval("pwX90"),phX90,0.0,0.0);
// Begin Acquisition
_dseqon(dec);
if (NUMch > 2) _dseqon(dec2);
if (NUMch > 3) dec3blank();
obsblank();
delay(getval("rd"));
startacq(getval("ad"));
acquire(np, 1/sw);
endacq();
_dseqoff(dec);
if (NUMch > 2) _dseqoff(dec2);
if (NUMch > 3) dec3unblank();
obsunblank(); decunblank();
}
void pulsesequence()
{
/* DECLARE AND LOAD VARIABLES */
char f1180[MAXSTR], /* Flag to start t1 @ halfdwell */
f2180[MAXSTR], /* Flag to start t2 @ halfdwell */
mag_flg[MAXSTR], /* magic-angle coherence transfer gradients */
TROSY[MAXSTR]; /* To check for TROSY flag */
int icosel, /* used to get n and p type */
t1_counter, /* used for states tppi in t1 */
t2_counter, /* used for states tppi in t2 */
ni2 = getval("ni2");
double p_d,
rfd,
ncyc,
COmix = getval("COmix"),
p_trim,
rftrim,
tau1, /* t1 delay */
tau2, /* t2 delay */
timeTN = getval("timeTN"), /* constant time for 15N evolution */
kappa = 5.4e-3,
lambda = 2.4e-3,
pwClvl = getval("pwClvl"), /* coarse power for C13 pulse */
pwC = getval("pwC"), /* C13 90 degree pulse length at pwClvl */
rf0, /* maximum fine power when using pwC pulses */
/* the following pulse lengths for SLP pulses are automatically calculated */
/* by the macro "proteincal". SLP pulse shapes, "offC3" etc are called */
/* directly from your shapelib. */
pwC3 = getval("pwC3"), /*180 degree pulse at Ca(56ppm) null at CO(174ppm) */
pwC3a = getval("pwC3a"), /* pwC3a=pwC3, but not set to zero when pwC3=0 */
phshift3, /* phase shift induced on CO by pwC3 ("offC3") pulse */
pwZ, /* the largest of pwC3 and 2.0*pwN */
pwZ1, /* the largest of pwC3a and 2.0*pwN for 1D experiments */
pwC6 = getval("pwC6"), /* 90 degree selective sinc pulse on CO(174ppm) */
pwC8 = getval("pwC8"), /* 180 degree selective sinc pulse on CO(174ppm) */
rf3, /* fine power for the pwC3 ("offC3") pulse */
rf6, /* fine power for the pwC6 ("offC6") pulse */
rf8, /* fine power for the pwC8 ("offC8") pulse */
compH = getval("compH"), /* adjustment for C13 amplifier compression */
compC = getval("compC"), /* adjustment for C13 amplifier compression */
pwHs = getval("pwHs"), /* H1 90 degree pulse length at tpwrs */
tpwrsf = getval("tpwrsf"), /* fine power adjustment for flipback */
tpwrs, /* power for the pwHs ("H2Osinc") pulse */
pwHd, /* H1 90 degree pulse length at tpwrd */
tpwrd, /* rf for WALTZ decoupling */
waltzB1 = getval("waltzB1"), /* waltz16 field strength (in Hz) */
pwNlvl = getval("pwNlvl"), /* power for N15 pulses */
pwN = getval("pwN"), /* N15 90 degree pulse length at pwNlvl */
sw1 = getval("sw1"),
sw2 = getval("sw2"),
gt1 = getval("gt1"), /* coherence pathway gradients */
gzcal = getval("gzcal"), /* g/cm to DAC conversion factor */
gzlvl1 = getval("gzlvl1"),
gzlvl2 = getval("gzlvl2"),
gt0 = getval("gt0"), /* other gradients */
gt3 = getval("gt3"),
gt4 = getval("gt4"),
gt5 = getval("gt5"),
gstab = getval("gstab"),
gzlvl0 = getval("gzlvl0"),
gzlvl3 = getval("gzlvl3"),
gzlvl4 = getval("gzlvl4"),
gzlvl5 = getval("gzlvl5"),
gzlvl6 = getval("gzlvl6");
getstr("f1180",f1180);
getstr("f2180",f2180);
getstr("mag_flg",mag_flg);
getstr("TROSY",TROSY);
/* LOAD PHASE TABLE */
settable(t3,2,phi3);
settable(t4,1,phx);
settable(t5,4,phi5);
settable(t8,1,phx);
settable(t9,8,phi9);
settable(t10,1,phx);
settable(t11,1,phy);
settable(t12,4,rec);
/* INITIALIZE VARIABLES */
if( dpwrf < 4095 )
{ printf("reset dpwrf=4095 and recalibrate C13 90 degree pulse");
psg_abort(1); }
/* maximum fine power for pwC pulses */
rf0 = 4095.0;
/* 180 degree pulse on Ca, null at CO 118ppm away */
rf3 = (compC*4095.0*pwC*2.0)/pwC3a;
rf3 = (int) (rf3 + 0.5);
/* the pwC3 pulse at the middle of t1 */
if ((ni2 > 0.0) && (ni == 1.0)) ni = 0.0;
if (pwC3a > 2.0*pwN) pwZ = pwC3a; else pwZ = 2.0*pwN;
if ((pwC3==0.0) && (pwC3a>2.0*pwN)) pwZ1=pwC3a-2.0*pwN; else pwZ1=0.0;
if ( ni > 1 ) pwC3 = pwC3a;
if ( pwC3 > 0 ) phshift3 = 48.0;
else phshift3 = 0.0;
/* 90 degree one-lobe sinc pulse on CO, null at Ca 118ppm away */
rf6 = (compC*4095.0*pwC*1.69)/pwC6; /* needs 1.69 times more */
rf6 = (int) (rf6 + 0.5); /* power than a square pulse */
/* 180 degree one-lobe sinc pulse on CO, null at Ca 118ppm away */
rf8 = (compC*4095.0*pwC*2.0*1.65)/pwC8; /* needs 1.65 times more */
rf8 = (int) (rf8 + 0.5); /* power than a square pulse */
/* selective H20 one-lobe sinc pulse */
tpwrs = tpwr - 20.0*log10(pwHs/(compH*pw*1.69)); /* needs 1.69 times more */
tpwrs = (int) (tpwrs); /* power than a square pulse */
/* power level and pulse time for WALTZ 1H decoupling */
pwHd = 1/(4.0 * waltzB1) ;
tpwrd = tpwr - 20.0*log10(pwHd/(compH*pw));
tpwrd = (int) (tpwrd + 0.5);
/* dipsi-3 decoupling on COCO */
p_trim = 1/(4*5000*(sfrq/600.0)); /* 5 kHz trim pulse at 600MHz as per Bax */
p_d = (5.0)/(9.0*4.0*2800.0*(sfrq/600.0)); /* 2.8 kHz DIPSI-3 at 600MHz as per Bax*/
rftrim = (compC*4095.0*pwC)/p_trim;
rftrim = (int)(rftrim+0.5);
rfd = (compC*4095.0*pwC*5.0)/(p_d*9.0);
rfd = (int) (rfd + 0.5);
ncyc = ((COmix - 0.002)/51.8/4/p_d);
ncyc = (int) (ncyc + 0.5);
initval(ncyc,v9);
/* CHECK VALIDITY OF PARAMETER RANGES */
if ( 0.5*ni2*1/(sw2) > timeTN - WFG3_START_DELAY)
{ printf(" ni2 is too big. Make ni2 equal to %d or less.\n",
((int)((timeTN - WFG3_START_DELAY)*2.0*sw2))); psg_abort(1);}
if ( dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y' )
{ printf("incorrect dec1 decoupler flags! Should be 'nnn' "); psg_abort(1);}
if ( dm2[A] == 'y' || dm2[B] == 'y' )
{ printf("incorrect dec2 decoupler flags! Should be 'nny' "); psg_abort(1);}
if ( dpwr2 > 50 )
{ printf("dpwr2 too large! recheck value "); psg_abort(1);}
if ( pw > 50.0e-6 )
{ printf(" pw too long ! recheck value "); psg_abort(1);}
if ( (pwN > 100.0e-6) && (ni>1 || ni2>1))
{ printf(" pwN too long! recheck value "); psg_abort(1);}
if ( TROSY[A] == 'y')
{ printf(" TROSY option is not implemented"); psg_abort(1);}
/* PHASES AND INCREMENTED TIMES */
/* Phase incrementation for hypercomplex 2D data, States-Haberkorn element */
if (phase1 == 2) tsadd(t3,1,4);
if (phase2 == 2)
{tsadd(t10,2,4); icosel = +1;}
else
icosel = -1;
/* Set up f1180 */
tau1 = d2;
if((f1180[A] == 'y') && (ni > 1.0))
{ tau1 += ( 1.0 / (2.0*sw1) ); if(tau1 < 0.2e-6) tau1 = 0.0; }
/* Set up f2180 */
tau2 = d3;
if((f2180[A] == 'y') && (ni2 > 1.0))
{ tau2 += ( 1.0 / (2.0*sw2) ); if(tau2 < 0.2e-6) tau2 = 0.0; }
tau2 = tau2/2.0;
/* Calculate modifications to phases for States-TPPI acquisition */
if( ix == 1) d2_init = d2;
t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
if(t1_counter % 2)
{ tsadd(t3,2,4); tsadd(t12,2,4); }
if( ix == 1) d3_init = d3;
t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
if(t2_counter % 2)
{ tsadd(t8,2,4); tsadd(t12,2,4); }
/* BEGIN PULSE SEQUENCE */
status(A);
delay(d1);
rcvroff();
obspower(tpwr);
decpower(pwClvl);
dec2power(pwNlvl);
decpwrf(rf0);
obsoffset(tof);
txphase(zero);
delay(1.0e-5);
dec2rgpulse(pwN, zero, 0.0, 0.0); /*destroy N15 and C13 magnetization*/
decrgpulse(pwC, zero, 0.0, 0.0);
zgradpulse(gzlvl0, 0.5e-3);
delay(1.0e-4);
dec2rgpulse(pwN, one, 0.0, 0.0);
decrgpulse(pwC, zero, 0.0, 0.0);
zgradpulse(0.7*gzlvl0, 0.5e-3);
delay(5.0e-4);
rgpulse(pw,zero,0.0,0.0); /* 1H pulse excitation */
dec2phase(zero);
zgradpulse(gzlvl0, gt0);
delay(lambda - gt0);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
txphase(one);
zgradpulse(gzlvl0, gt0);
delay(lambda - gt0);
rgpulse(pw, one, 0.0, 0.0);
txphase(zero);
if (tpwrsf<4095.0) {obspower(tpwrs+6.0); obspwrf(tpwrsf);}
else obspower(tpwrs);
shaped_pulse("H2Osinc", pwHs, zero, 5.0e-4, 0.0);
obspower(tpwrd); obspwrf(4095.0);
zgradpulse(gzlvl3, gt3);
delay(2.0e-4);
dec2rgpulse(pwN, zero, 0.0, 0.0);
txphase(one);
delay(kappa - pwHd - 2.0e-6 - PRG_START_DELAY);
rgpulse(pwHd,one,0.0,0.0);
txphase(zero);
delay(2.0e-6);
obsprgon("waltz16", pwHd, 90.0); /* PRG_START_DELAY */
xmtron();
decphase(zero);
dec2phase(zero);
decpwrf(rf8);
delay(timeTN - kappa - WFG3_START_DELAY);
/* WFG3_START_DELAY */
sim3shaped_pulse("", "offC8", "", 0.0, pwC8, 2.0*pwN, zero, zero, zero,
0.0, 0.0);
decphase(t3);
decpwrf(rf6);
delay(timeTN);
dec2rgpulse(pwN, zero, 0.0, 0.0);
xmtroff();
obsprgoff();
rgpulse(pwHd,three,2.0e-6,0.0);
zgradpulse(gzlvl3, gt3);
delay(2.0e-4);
/***************************************************************/
/* The sequence is different from here with respect to ghn_co **/
/***************************************************************/
rgpulse(pwHd,one,2.0e-6,0.0); /* H1 decoupler is turned on */
txphase(zero);
delay(2.0e-6);
obsprgon("waltz16", pwHd, 90.0);
xmtron();
decshaped_pulse("offC6", pwC6, t3, 0.0, 0.0);
decphase(zero);
/* Refocus CO, evolve CO, spinlock CO and defocus CO */
delay(timeTN - tau1/2 - 0.6*pwC6 - WFG3_START_DELAY);
decpwrf(rf8);
sim3shaped_pulse("", "offC8","",0.0,pwC8, 2.0*pwN, zero,zero,zero,0.0,0.0);
decpwrf(rf3);
delay(timeTN - WFG3_STOP_DELAY - WFG_START_DELAY - pwC3a/2);
decshaped_pulse("offC3",pwC3a,zero,0.0,0.0);
if (tau1 > 0)
delay(tau1/2 - WFG_STOP_DELAY - pwC3a/2 - 2.0e-6);
else
delay(tau1/2);
/*******DO SPINLOCK ********/
decpwrf(rftrim);
decrgpulse(0.002,zero,2.0e-6,0.0);
decpwrf(rfd);
starthardloop(v9);
decrgpulse(6.4*p_d,zero,0.0,0.0);
decrgpulse(8.2*p_d,two,0.0,0.0);
decrgpulse(5.8*p_d,zero,0.0,0.0);
decrgpulse(5.7*p_d,two,0.0,0.0);
decrgpulse(0.6*p_d,zero,0.0,0.0);
decrgpulse(4.9*p_d,two,0.0,0.0);
decrgpulse(7.5*p_d,zero,0.0,0.0);
decrgpulse(5.3*p_d,two,0.0,0.0);
decrgpulse(7.4*p_d,zero,0.0,0.0);
decrgpulse(6.4*p_d,two,0.0,0.0);
decrgpulse(8.2*p_d,zero,0.0,0.0);
decrgpulse(5.8*p_d,two,0.0,0.0);
decrgpulse(5.7*p_d,zero,0.0,0.0);
decrgpulse(0.6*p_d,two,0.0,0.0);
decrgpulse(4.9*p_d,zero,0.0,0.0);
decrgpulse(7.5*p_d,two,0.0,0.0);
decrgpulse(5.3*p_d,zero,0.0,0.0);
decrgpulse(7.4*p_d,two,0.0,0.0);
decrgpulse(6.4*p_d,two,0.0,0.0);
decrgpulse(8.2*p_d,zero,0.0,0.0);
decrgpulse(5.8*p_d,two,0.0,0.0);
decrgpulse(5.7*p_d,zero,0.0,0.0);
decrgpulse(0.6*p_d,two,0.0,0.0);
decrgpulse(4.9*p_d,zero,0.0,0.0);
decrgpulse(7.5*p_d,two,0.0,0.0);
decrgpulse(5.3*p_d,zero,0.0,0.0);
decrgpulse(7.4*p_d,two,0.0,0.0);
decrgpulse(6.4*p_d,zero,0.0,0.0);
decrgpulse(8.2*p_d,two,0.0,0.0);
decrgpulse(5.8*p_d,zero,0.0,0.0);
decrgpulse(5.7*p_d,two,0.0,0.0);
decrgpulse(0.6*p_d,zero,0.0,0.0);
decrgpulse(4.9*p_d,two,0.0,0.0);
decrgpulse(7.5*p_d,zero,0.0,0.0);
decrgpulse(5.3*p_d,two,0.0,0.0);
decrgpulse(7.4*p_d,zero,0.0,0.0);
endhardloop();
decpwrf(4095.0);
/* End of spinlock */
delay(timeTN - WFG3_START_DELAY);
decpwrf(rf8);
sim3shaped_pulse("","offC8","",0.0,pwC8,2*pwN,zero,zero,zero,0.0,0.0);
decpwrf(rf6);
delay(timeTN - WFG3_STOP_DELAY);
/***************************************************************/
/* The sequence is same as ghn_co from this point ********/
/***************************************************************/
decshaped_pulse("offC6", pwC6, t5, 0.0, 0.0);
/* xxxxxxxxxxxxxxxxxx OPTIONS FOR N15 EVOLUTION xxxxxxxxxxxxxxxxxxxxx */
dec2phase(t8);
zgradpulse(gzlvl4, gt4);
txphase(one);
dcplrphase(zero);
delay(2.0e-4);
dec2rgpulse(pwN, t8, 0.0, 0.0);
decphase(zero);
dec2phase(t9);
decpwrf(rf8);
delay(timeTN - WFG3_START_DELAY - tau2);
/* WFG3_START_DELAY */
sim3shaped_pulse("", "offC8", "", 0.0, pwC8, 2.0*pwN, zero, zero, t9, 0.0, 0.0);
dec2phase(t10);
decpwrf(rf3);
if (tau2 > kappa)
{
delay(timeTN - pwC3a - WFG_START_DELAY); /* WFG_START_DELAY */
decshaped_pulse("offC3", pwC3a, zero, 0.0, 0.0);
delay(tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
xmtroff();
obsprgoff(); /* PRG_STOP_DELAY */
rgpulse(pwHd,three,2.0e-6,0.0);
txphase(t4);
delay(kappa - gt1 - 2.0*GRADIENT_DELAY - 1.0e-4);
if (mag_flg[A]=='y') magradpulse(gzcal*gzlvl1, gt1);
else zgradpulse(gzlvl1, gt1); /* 2.0*GRADIENT_DELAY */
obspower(tpwr); /* POWER_DELAY */
delay(1.0e-4 - POWER_DELAY);
}
else if (tau2 > (kappa - pwC3a - WFG_START_DELAY))
{
delay(timeTN + tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
xmtroff();
obsprgoff(); /* PRG_STOP_DELAY */
rgpulse(pwHd,three,2.0e-6,0.0);
txphase(t4); /* WFG_START_DELAY */
decshaped_pulse("offC3", pwC3a, zero, 0.0, 0.0);
delay(kappa -pwC3a -WFG_START_DELAY -gt1 -2.0*GRADIENT_DELAY -1.0e-4);
if (mag_flg[A]=='y') magradpulse(gzcal*gzlvl1, gt1);
else zgradpulse(gzlvl1, gt1); /* 2.0*GRADIENT_DELAY */
obspower(tpwr); /* POWER_DELAY */
delay(1.0e-4 - POWER_DELAY);
}
else if (tau2 > gt1 + 2.0*GRADIENT_DELAY + 1.0e-4)
{
delay(timeTN + tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
xmtroff();
obsprgoff(); /* PRG_STOP_DELAY */
rgpulse(pwHd,three,2.0e-6,0.0);
txphase(t4);
delay(kappa - tau2 - pwC3a - WFG_START_DELAY); /* WFG_START_DELAY */
decshaped_pulse("offC3", pwC3a, zero, 0.0, 0.0);
delay(tau2 - gt1 - 2.0*GRADIENT_DELAY - 1.0e-4);
if (mag_flg[A]=='y') magradpulse(gzcal*gzlvl1, gt1);
else zgradpulse(gzlvl1, gt1); /* 2.0*GRADIENT_DELAY */
obspower(tpwr); /* POWER_DELAY */
delay(1.0e-4 - POWER_DELAY);
}
else
{
delay(timeTN + tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
xmtroff();
obsprgoff(); /* PRG_STOP_DELAY */
rgpulse(pwHd,three,2.0e-6,0.0);
txphase(t4);
delay(kappa-tau2-pwC3a-WFG_START_DELAY-gt1-2.0*GRADIENT_DELAY-1.0e-4);
if (mag_flg[A]=='y') magradpulse(gzcal*gzlvl1, gt1);
else zgradpulse(gzlvl1, gt1); /* 2.0*GRADIENT_DELAY */
obspower(tpwr); /* POWER_DELAY */
delay(1.0e-4 - POWER_DELAY); /* WFG_START_DELAY */
decshaped_pulse("offC3", pwC3a, zero, 0.0, 0.0);
delay(tau2);
}
/* xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx */
sim3pulse(pw, 0.0, pwN, t4, zero, t10, 0.0, 0.0);
txphase(zero);
dec2phase(zero);
zgradpulse(gzlvl5, gt5);
delay(lambda - 1.3*pwN - gt5);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
zgradpulse(gzlvl5, gt5);
txphase(one);
dec2phase(t11);
delay(lambda - 1.3*pwN - gt5);
sim3pulse(pw, 0.0, pwN, one, zero, t11, 0.0, 0.0);
txphase(zero);
dec2phase(zero);
zgradpulse(gzlvl6, gt5);
delay(lambda - 1.3*pwN - gt5);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
dec2phase(t10);
zgradpulse(gzlvl6, gt5);
delay(lambda - 0.65*pwN - gt5);
rgpulse(pw, zero, 0.0, 0.0);
delay((gt1/10.0) + 1.0e-4 +gstab - 0.5*pw + 2.0*GRADIENT_DELAY + POWER_DELAY);
rgpulse(2.0*pw, zero, 0.0,0.0);
dec2power(dpwr2); /* POWER_DELAY */
if (mag_flg[A] == 'y') magradpulse(icosel*gzcal*gzlvl2, gt1/10.0);
else zgradpulse(icosel*gzlvl2, gt1/10.0); /* 2.0*GRADIENT_DELAY */
delay(gstab);
rcvron();
statusdelay(C,1.0e-4);
setreceiver(t12);
}
pulsesequence()
{
/* DECLARE VARIABLES */
char satmode[MAXSTR],
fscuba[MAXSTR],
fc180[MAXSTR], /* Flag for checking sequence */
ddseq[MAXSTR], /* 2H decoupling seqfile */
fCTCa[MAXSTR], /* Flag for CT or non_CT on Ca dimension */
sel_flg[MAXSTR],
cbdecseq[MAXSTR];
int icosel,
ni = getval("ni"),
t1_counter; /* used for states tppi in t1 */
double tau1, /* t1 delay */
tau2, /* t2 delay */
tau3, /* t2 delay */
taua, /* ~ 1/4JNH = 2.25 ms */
taub, /* ~ 1/4JNH = 2.25 ms */
tauc, /* ~ 1/4JCaC' = 4 ms */
taud, /* ~ 1/4JCaC' = 4.5 ms if bigTCo can be set to be
less than 4.5ms and then taud can be smaller*/
zeta, /* time for C'-N to refocuss set to 0.5*24.0 ms */
bigTCa, /* Ca T period */
bigTCo, /* Co T period */
bigTN, /* nitrogen T period */
BigT1, /* delay to compensate for gradient gt5 */
sw1, /* sweep width in f1 */
sw2, /* sweep width in f2 */
sphase, /* small angle phase shift */
sphase1,
sphase2, /* used only for constant t2 period */
pwS4, /* selective CO 180 */
pwS3, /* selective Ca 180 */
pwS1, /* selecive Ca 90 */
pwS2, /* selective CO 90 */
cbpwr, /* power level for selective CB decoupling */
cbdmf, /* pulse width for selective CB decoupling */
cbres, /* decoupling resolution of CB decoupling */
gt1,
gt2,
gt3,
gt4,
gt5,
gt6,
gt7,
gt8,
gt9,
gt10,
gt11,
gt12,
gstab,
gzlvl1,
gzlvl2,
gzlvl3,
gzlvl4,
gzlvl5,
gzlvl6,
gzlvl7,
gzlvl8,
gzlvl9,
gzlvl10,
gzlvl11,
gzlvl12,
compH = getval("compH"), /* adjustment for amplifier compression */
pwHs = getval ("pwHs"), /* H1 90 degree pulse at tpwrs */
tpwrs, /* power for pwHs ("H2osinc") pulse */
pwClvl = getval("pwClvl"), /* coarse power for C13 pulse */
pwC = getval("pwC"), /* C13 90 degree pulse length at pwClvl */
pwNlvl = getval("pwNlvl"), /* power for N15 pulses */
pwN = getval("pwN"), /* N15 90 degree pulse length at pwNlvl */
swCa = getval("swCa"),
swCO = getval("swCO"),
swN = getval("swN"),
swTilt, /* This is the sweep width of the tilt vector */
cos_N, cos_CO, cos_Ca,
angle_N, angle_CO, angle_Ca;
angle_N=0.0; /*initialize variable*/
/* LOAD VARIABLES */
getstr("satmode",satmode);
getstr("fc180",fc180);
getstr("fscuba",fscuba);
getstr("ddseq",ddseq);
getstr("fCTCa",fCTCa);
getstr("sel_flg",sel_flg);
taua = getval("taua");
taub = getval("taub");
tauc = getval("tauc");
taud = getval("taud");
zeta = getval("zeta");
bigTCa = getval("bigTCa");
bigTCo = getval("bigTCo");
bigTN = getval("bigTN");
BigT1 = getval("BigT1");
tpwr = getval("tpwr");
dpwr = getval("dpwr");
dpwr3 = getval("dpwr3");
sw1 = getval("sw1");
sw2 = getval("sw2");
sphase = getval("sphase");
sphase1 = getval("sphase1");
sphase2 = getval("sphase2");
gt1 = getval("gt1");
gt2 = getval("gt2");
gt3 = getval("gt3");
gt4 = getval("gt4");
gt5 = getval("gt5");
gt6 = getval("gt6");
gt7 = getval("gt7");
gt8 = getval("gt8");
gt9 = getval("gt9");
gt10 = getval("gt10");
gt11 = getval("gt11");
gt12 = getval("gt12");
gstab = getval("gstab");
gzlvl1 = getval("gzlvl1");
gzlvl2 = getval("gzlvl2");
gzlvl3 = getval("gzlvl3");
gzlvl4 = getval("gzlvl4");
gzlvl5 = getval("gzlvl5");
gzlvl6 = getval("gzlvl6");
gzlvl7 = getval("gzlvl7");
gzlvl8 = getval("gzlvl8");
gzlvl9 = getval("gzlvl9");
gzlvl10 = getval("gzlvl10");
gzlvl11 = getval("gzlvl11");
gzlvl12 = getval("gzlvl12");
/* Load variable */
cbpwr = getval("cbpwr");
cbdmf = getval("cbdmf");
cbres = getval("cbres");
tau1 = 0;
tau2 = 0;
tau3 = 0;
cos_N = 0;
cos_CO = 0;
cos_Ca = 0;
getstr("cbdecseq", cbdecseq);
/* LOAD PHASE TABLE */
settable(t1,1,phi1);
settable(t2,1,phi2);
settable(t3,4,phi3);
settable(t4,1,phi4);
settable(t5,1,phi5);
settable(t7,4,phi7);
settable(t8,4,phi8);
settable(t6,4,rec);
pwS1=c13pulsepw("ca", "co", "square", 90.0);
pwS2=c13pulsepw("co", "ca", "sinc", 90.0);
pwS3=c13pulsepw("ca", "co", "square", 180.0);
pwS4=c13pulsepw("co", "ca", "sinc", 180.0);
tpwrs = tpwr - 20.0*log10(pwHs/(compH*pw*1.69)); /*needs 1.69 times more*/
tpwrs = (int) (tpwrs); /*power than a square pulse */
/* CHECK VALIDITY OF PARAMETER RANGES */
if((dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y' ))
{
printf("incorrect dec1 decoupler flags! ");
psg_abort(1);
}
if((dm2[A] == 'y' || dm2[B] == 'y' || dm2[C] == 'y'))
{
printf("incorrect dec2 decoupler flags! Should be 'nnn' ");
psg_abort(1);
}
if( satpwr > 6 )
{
printf("TSATPWR too large !!! ");
psg_abort(1);
}
if( dpwr > 46 )
{
printf("don't fry the probe, DPWR too large! ");
psg_abort(1);
}
if( dpwr2 > 46 )
{
printf("don't fry the probe, DPWR2 too large! ");
psg_abort(1);
}
if( pwClvl > 62 )
{
printf("don't fry the probe, pwClvl too large! ");
psg_abort(1);
}
if( pw > 200.0e-6 )
{
printf("dont fry the probe, pw too high ! ");
psg_abort(1);
}
if( pwN > 200.0e-6 )
{
printf("dont fry the probe, pwN too high ! ");
psg_abort(1);
}
if( pwC > 200.0e-6 )
{
printf("dont fry the probe, pwC too high ! ");
psg_abort(1);
}
if( gt3 > 2.5e-3 )
{
printf("gt3 is too long\n");
psg_abort(1);
}
if( gt1 > 10.0e-3 || gt2 > 10.0e-3 || gt4 > 10.0e-3 || gt5 > 10.0e-3
|| gt6 > 10.0e-3 || gt7 > 10.0e-3 || gt8 > 10.0e-3
|| gt9 > 10.0e-3 || gt10 > 10.0e-3 || gt11 > 50.0e-6)
{
printf("gt values are too long. Must be < 10.0e-3 or gt11=50us\n");
psg_abort(1);
}
/* PHASES AND INCREMENTED TIMES */
/* Set up angles and phases */
angle_CO=getval("angle_CO"); cos_CO=cos(PI*angle_CO/180.0);
angle_Ca=getval("angle_Ca"); cos_Ca=cos(PI*angle_Ca/180.0);
if ( (angle_CO < 0) || (angle_CO > 90) )
{ printf ("angle_CO must be between 0 and 90 degree.\n"); psg_abort(1); }
if ( (angle_Ca < 0) || (angle_Ca > 90) )
{ printf ("angle_Ca must be between 0 and 90 degree.\n"); psg_abort(1); }
if ( 1.0 < (cos_CO*cos_CO + cos_Ca*cos_Ca) )
{
printf ("Impossible angles.\n"); psg_abort(1);
}
else
{
cos_N=sqrt(1.0- (cos_CO*cos_CO + cos_Ca*cos_Ca));
angle_N = 180.0*acos(cos_N)/PI;
}
swTilt=swCO*cos_CO + swCa*cos_Ca + swN*cos_N;
if (ix ==1)
{
printf("\n\nn\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n");
printf ("Maximum Sweep Width: \t\t %f Hz\n", swTilt);
printf ("Anlge_CO:\t%6.2f\n", angle_CO);
printf ("Anlge_Ca:\t%6.2f\n", angle_Ca);
printf ("Anlge_N :\t%6.2f\n", angle_N );
}
/* Set up hyper complex */
/* sw1 is used as symbolic index */
if ( sw1 < 1000 ) { printf ("Please set sw1 to some value larger than 1000.\n"); psg_abort(1); }
if (ix == 1) d2_init = d2;
t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
if (t1_counter % 2) { tsadd(t2,2,4); tsadd(t6,2,4); }
if (phase1 == 1) { ;} /* CC */
else if (phase1 == 2) { tsadd(t5,1,4);} /* SC */
else if (phase1 == 3) { tsadd(t1,1,4); } /* CS */
else if (phase1 == 4) { tsadd(t5,1,4); tsadd(t1,1,4); } /* SS */
else { printf ("phase1 can only be 1,2,3,4. \n"); psg_abort(1); }
if (phase2 == 2) { tsadd(t4,2,4); icosel = 1; } /* N */
else icosel = -1;
tau1 = 1.0*t1_counter*cos_Ca/swTilt;
tau2 = 1.0*t1_counter*cos_CO/swTilt;
tau3 = 1.0*t1_counter*cos_N/swTilt;
tau1 = tau1/2.0; tau2 = tau2/2.0; tau3 = tau3/2.0;
/* CHECK VALIDITY OF PARAMETER RANGES */
if (bigTN - 0.5*ni*(cos_N/swTilt) + pwS4 < 0.2e-6)
{ printf(" ni is too big. Make ni equal to %d or less.\n",
((int)((bigTN + pwS4)*2.0*swTilt/cos_N))); psg_abort(1);}
if ((fCTCa[A]=='y') && (bigTCa - 0.5*ni*(cos_Ca/swTilt) - WFG_STOP_DELAY
- POWER_DELAY - gt11 - 50.2e-6 < 0.2e-6))
{
printf(" ni is too big for Ca. Make ni equal to %d or less.\n",
(int) ((bigTCa -WFG_STOP_DELAY
- POWER_DELAY - gt11 - 50.2e-6)/(0.5*cos_Ca/swTilt)) );
psg_abort(1);
}
if (bigTCo - 0.5*ni*(cos_CO/swTilt) - 4.0e-6 - POWER_DELAY < 0.2e-6)
{
printf(" ni is too big for CO. Make ni equal to %d or less.\n",
(int) ((bigTCo - 4.0e-6 - POWER_DELAY) / (0.5*cos_CO/swTilt)) );
psg_abort(1);
}
/* BEGIN ACTUAL PULSE SEQUENCE */
status(A);
obsoffset(tof);
obspower(satpwr); /* Set transmitter power for 1H presaturation */
obspwrf(4095.0);
decpower(pwClvl); /* Set Dec1 power for hard 13C pulses */
decpwrf(4095.0);
dec2power(pwNlvl); /* Set Dec2 power for 15N hard pulses */
dec2pwrf(4095.0);
set_c13offset("ca"); /* set Dec1 carrier at Ca */
sim3_c13pulse("", "ca", "co", "square", "", 0.0, 180.0, 0.0,
zero, zero, zero, 2.0e-6, 0.0);
set_c13offset("co"); /* set Dec1 carrier at Co */
/* Presaturation Period */
if (satmode[0] == 'y')
{
delay(2.0e-5);
rgpulse(d1,zero,2.0e-6,2.0e-6); /* presaturation */
obspower(tpwr); /* Set transmitter power for hard 1H pulses */
delay(2.0e-5);
if(fscuba[0] == 'y')
{
delay(2.2e-2);
rgpulse(pw,zero,2.0e-6,0.0);
rgpulse(2*pw,one,2.0e-6,0.0);
rgpulse(pw,zero,2.0e-6,0.0);
delay(2.2e-2);
}
}
else
{
delay(d1);
}
obspower(tpwr); /* Set transmitter power for hard 1H pulses */
txphase(one);
dec2phase(zero);
delay(1.0e-5);
/* Begin Pulses */
status(B);
rcvroff();
lk_hold();
shiftedpulse("sinc", pwHs, 90.0, 0.0, one, 2.0e-6, 0.0);
txphase(zero);
delay(2.0e-6);
/* xxxxxxxxxxxxxxxxxxxxxx 1HN to 15N TRANSFER xxxxxxxxxxxxxxxxxx */
rgpulse(pw,zero,0.0,0.0); /* 90 deg 1H pulse */
delay(0.2e-6);
zgradpulse(gzlvl1, gt1);
delay(2.0e-6);
delay(taua - gt1 - 2.2e-6); /* taua <= 1/4JNH */
sim3pulse(2*pw,0.0,2*pwN,zero,zero,zero,0.0,0.0);
txphase(three); dec2phase(zero); decphase(zero);
delay(taua - gt1 - gstab -0.2e-6 - 2.0e-6);
delay(0.2e-6);
zgradpulse(gzlvl1, gt1);
delay(gstab);
/* xxxxxxxxxxxxxxxxxxxxxx 15N to 13CO TRANSFER xxxxxxxxxxxxxxxxxx */
if(sel_flg[A] == 'n') {
rgpulse(pw,three,2.0e-6,0.0);
delay(0.2e-6);
zgradpulse(gzlvl2, gt2);
delay(gstab);
dec2rgpulse(pwN,zero,0.0,0.0);
delay( zeta + pwS4 );
dec2rgpulse(2*pwN,zero,0.0,0.0);
c13pulse("co", "ca", "sinc", 180.0, zero, 0.0, 0.0);
dec2phase(one);
delay(zeta - 2.0e-6);
dec2rgpulse(pwN,one,2.0e-6,0.0);
}
else {
rgpulse(pw,one,2.0e-6,0.0);
initval(1.0,v6);
dec2stepsize(45.0);
dcplr2phase(v6);
delay(0.2e-6);
zgradpulse(gzlvl2, gt2);
delay(gstab);
dec2rgpulse(pwN,zero,0.0,0.0);
dcplr2phase(zero); dec2phase(zero);
delay(1.34e-3 - SAPS_DELAY - 2.0*pw);
rgpulse(pw,one,0.0,0.0);
rgpulse(2.0*pw,zero,0.0,0.0);
rgpulse(pw,one,0.0,0.0);
delay( zeta - 1.34e-3 - 2.0*pw + pwS4 );
dec2rgpulse(2*pwN,zero,0.0,0.0);
c13pulse("co", "ca", "sinc", 180.0, zero, 0.0, 0.0);
dec2phase(one);
delay(zeta - 2.0e-6);
dec2rgpulse(pwN,one,2.0e-6,0.0);
}
dec2phase(zero); decphase(zero);
delay(0.2e-6);
zgradpulse(gzlvl3, gt3);
delay(gstab);
/* xxxxxxxxxxxxxxxxxxxxx 13CO to 13CA TRANSFER xxxxxxxxxxxxxxxxxxxxxxx */
c13pulse("co", "ca", "sinc", 90.0, zero, 2.0e-6, 0.0);
delay(2.0e-7);
zgradpulse(gzlvl10, gt10);
delay(100.0e-6);
delay(tauc - POWER_DELAY - gt10 - 100.2e-6 - (0.5*10.933*pwC));
decrgpulse(pwC*158.0/90.0, zero, 0.0, 0.0);
decrgpulse(pwC*171.2/90.0, two, 0.0, 0.0);
decrgpulse(pwC*342.8/90.0, zero, 0.0, 0.0); /* Shaka 6 composite */
decrgpulse(pwC*145.5/90.0, two, 0.0, 0.0);
decrgpulse(pwC*81.2/90.0, zero, 0.0, 0.0);
decrgpulse(pwC*85.3/90.0, two, 0.0, 0.0);
delay(2.0e-7);
zgradpulse(gzlvl10, gt10);
delay(100.0e-6);
delay(tauc - POWER_DELAY - 4.0e-6 - gt10 - 100.2e-6 - (0.5*10.933*pwC));
c13pulse("co", "ca", "sinc", 90.0, one, 4.0e-6, 0.0);
set_c13offset("ca"); /* change Dec1 carrier to Ca (55 ppm) */
delay(0.2e-6);
zgradpulse(gzlvl9, gt9);
delay(gstab);
/* xxxxxxxxxxxxxxxxxx 13CA EVOLUTION xxxxxxxxxxxxxxxxxxxxxx */
/* Turn on D decoupling using the third decoupler */
dec3unblank(); dec3rgpulse(1/dmf3, one, 0.0, 0.0);
dec3unblank(); setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
/* Turn on D decoupling */
c13pulse("ca", "co", "square", 90.0, t5, 2.0e-6, 0.0);
if (fCTCa[A]=='y')
{
/* Constant t2 */
decpower(cbpwr);
decphase(zero);
decprgon(cbdecseq,1/cbdmf,cbres);
decon();
delay(tau1);
decoff();
decprgoff();
decpower(pwClvl);
dec2rgpulse(pwN,one,0.0,0.0);
dec2rgpulse(2*pwN,zero,0.0,0.0);
dec2rgpulse(pwN,one,0.0,0.0);
c13pulse("co", "ca", "sinc", 180.0, zero, 0.0, 0.0);
decpower(cbpwr);
decphase(zero);
decprgon(cbdecseq,1/cbdmf,cbres);
decon();
delay(bigTCa - 4.0*pwN - WFG_START_DELAY - pwS4
- WFG_STOP_DELAY - POWER_DELAY - WFG_START_DELAY - gt11 - gstab -0.2e-6);
decoff();
decprgoff();
decpower(pwClvl);
delay(0.2e-6);
zgradpulse(gzlvl11, gt11);
delay(gstab);
initval(1.0,v3);
decstepsize(140);
dcplrphase(v3);
c13pulse("ca", "co", "square", 180.0, zero, 0.0, 0.0);
delay(0.2e-6);
zgradpulse(gzlvl11, gt11);
delay(gstab);
decpower(cbpwr);
decphase(zero);
decprgon(cbdecseq,1/cbdmf,cbres);
decon();
delay(bigTCa - tau1 - WFG_STOP_DELAY - POWER_DELAY - gt11 - gstab -0.2e-6);
decoff();
decprgoff();
}
/* non_constant t2 */
else
{
if (fc180[A]=='n')
{
if ((ni>1.0) && (tau1>0.0))
{
if (tau1 - 2.0*pwS1/PI - PRG_START_DELAY - 2*POWER_DELAY -
PRG_STOP_DELAY - pwN > 0.0)
{
decpower(cbpwr);
decphase(zero);
decprgon(cbdecseq,1/cbdmf,cbres);
decon();
delay(tau1 - 2.0*pwS1/PI - PRG_START_DELAY - 2*POWER_DELAY -
PRG_STOP_DELAY - pwN);
decoff();
decprgoff();
decphase(zero); dec2phase(zero);
decpower(pwClvl);
sim3_c13pulse("", "co", "ca", "sinc", "", 0.0, 180.0, 2.0*pwN,
zero, zero, zero, 0.0, 0.0);
decpower(cbpwr);
decphase(zero);
decprgon(cbdecseq,1/cbdmf,cbres);
decon();
delay(tau1 - 2.0*pwS1/PI - PRG_START_DELAY - 2*POWER_DELAY -
PRG_STOP_DELAY - pwN);
decoff();
decprgoff();
decstepsize(1.0);
initval(sphase1, v3);
dcplrphase(v3);
}
else
{
tsadd(t6,2,4);
delay(2.0*tau1);
delay(10.0e-6);
sim3_c13pulse("", "ca", "co", "square", "", 0.0, 180.0, 2.0*pwN,
zero, zero, zero, 2.0e-6, 0.0);
delay(10.0e-6);
}
}
else
{
tsadd(t6,2,4);
delay(10.0e-6);
sim3_c13pulse("", "ca", "co", "square", "", 0.0, 180.0, 2.0*pwN,
zero, zero, zero, 2.0e-6, 0.0);
delay(10.0e-6);
}
}
else
{
/* for checking sequence */
c13pulse("ca", "co", "square", 180.0, zero, 2.0e-6, 0.0);
}
}
decpower(pwClvl);
decphase(t7);
c13pulse("ca", "co", "square", 90.0, t7, 4.0e-6, 0.0);
dcplrphase(zero);
/* Turn off D decoupling */
dec3rgpulse(1/dmf3, three, 0.0, 0.0); dec3blank();
setstatus(DEC3ch, FALSE, 'w', FALSE, dmf3); dec3blank();
/* Turn off D decoupling */
set_c13offset("co"); /* set carrier back to Co */
delay(0.2e-6);
zgradpulse(gzlvl12, gt12);
delay(gstab);
/* xxxxxxxxxxxxxxx 13CA to 13CO TRANSFER and CT 13CO EVOLUTION xxxxxxxxxxxxxxxxx */
c13pulse("co", "ca", "sinc", 90.0, t1, 2.0e-6, 0.0);
delay(tau2);
dec2rgpulse(pwN,one,0.0,0.0);
dec2rgpulse(2*pwN,zero,0.0,0.0);
dec2rgpulse(pwN,one,0.0,0.0);
delay(taud - 4.0*pwN - POWER_DELAY
- 0.5*(WFG_START_DELAY + pwS3 + WFG_STOP_DELAY));
c13pulse("ca", "co", "square", 180.0, zero, 0.0, 0.0);
decphase(t8);
initval(1.0,v4);
decstepsize(sphase);
dcplrphase(v4);
delay(bigTCo - taud
- 0.5*(WFG_START_DELAY + pwS3 + WFG_STOP_DELAY) );
c13pulse("co", "ca", "sinc", 180.0, t8, 0.0, 0.0);
dcplrphase(zero); decphase(one);
delay(bigTCo - tau2 - POWER_DELAY - 4.0e-6);
c13pulse("co", "ca", "sinc", 90.0, one, 4.0e-6, 0.0);
delay(0.2e-6);
zgradpulse(gzlvl4, gt4);
delay(gstab);
/* t3 period */
dec2rgpulse(pwN,t2,2.0e-6,0.0);
dec2phase(t3);
delay(bigTN - tau3 + pwS4);
dec2rgpulse(2*pwN,t3,0.0,0.0);
c13pulse("co", "ca", "sinc", 180.0, zero, 0.0, 0.0);
txphase(zero);
dec2phase(t4);
delay(bigTN - gt5 - gstab -0.2e-6 - 2.0*GRADIENT_DELAY
- 4.0e-6 - WFG_START_DELAY - pwS3 - WFG_STOP_DELAY);
delay(0.2e-6);
zgradpulse(icosel*gzlvl5, gt5);
delay(gstab);
c13pulse("ca", "co", "square", 180.0, zero, 4.0e-6, 0.0);
delay(tau3);
sim3pulse(pw,0.0,pwN,zero,zero,t4,0.0,0.0);
delay(0.2e-6);
zgradpulse(gzlvl6, gt6);
delay(2.0e-6);
dec2phase(zero);
delay(taub - gt6 - 2.2e-6);
sim3pulse(2*pw,0.0,2*pwN,zero,zero,zero,0.0,0.0);
delay(0.2e-6);
zgradpulse(gzlvl6, gt6);
delay(200.0e-6);
txphase(one);
dec2phase(one);
delay(taub - gt6 - 200.2e-6);
sim3pulse(pw,0.0,pwN,one,zero,one,0.0,0.0);
delay(0.2e-6);
zgradpulse(gzlvl7, gt7);
delay(2.0e-6);
txphase(zero);
dec2phase(zero);
delay(taub - gt7 - 2.2e-6);
sim3pulse(2*pw,0.0,2*pwN,zero,zero,zero,0.0,0.0);
delay(0.2e-6);
zgradpulse(gzlvl7, gt7);
delay(200.0e-6);
delay(taub - gt7 - 200.2e-6);
sim3pulse(pw,0.0,pwN,zero,zero,zero,0.0,0.0);
delay(0.2e-6);
zgradpulse(-gzlvl8, gt8/2.0);
delay(50.0e-6);
delay(BigT1 - gt8/2.0 - 50.2e-6 - 0.5*(pwN - pw) - 2.0*pw/PI);
rgpulse(2*pw,zero,0.0,0.0);
delay(0.2e-6);
zgradpulse(gzlvl8, gt8/2.0);
delay(50.0e-6);
dec2power(dpwr2);
decpower(dpwr);
delay(BigT1 - gt8/2.0 - 50.2e-6 - 2.0*POWER_DELAY);
lk_sample();
/* rcvron(); */ /* Turn on receiver to warm up before acq */
/* BEGIN ACQUISITION */
status(C);
setreceiver(t6);
}
void pulsesequence()
{
char c1d[MAXSTR]; /* option to record only 1D C13 spectrum */
int ncyc;
double tau1 = 0.002, /* t1 delay */
post_del = 0.0,
pwClvl = getval("pwClvl"), /* coarse power for C13 pulse */
pwC = getval("pwC"), /* C13 90 degree pulse length at pwClvl */
compC = getval("compC"),
compH = getval("compH"),
mixpwr = getval("mixpwr"),
jCH = getval("jCH"),
gt0 = getval("gt0"),
gt1 = getval("gt1"),
gt2 = getval("gt2"),
gzlvl0 = getval("gzlvl0"),
gzlvl1 = getval("gzlvl1"),
gzlvl2 = getval("gzlvl2"),
grec = getval("grec"),
phase = getval("phase");
getstr("c1d",c1d);
ncyc=1;
if(jCH > 0.0)
tau1 = 0.25/jCH;
dbl(ct, v1); /* v1 = 0 */
mod4(v1,oph);
hlv(ct,v2);
add(v2,v1,v2);
if (phase > 1.5)
incr(v1); /* hypercomplex phase increment */
initval(2.0*(double)((int)(d2*getval("sw1")+0.5)%2),v10);
add(v1,v10,v1);
add(oph,v10,oph);
mod4(v1,v1); mod4(v2,v2); mod4(oph,oph);
assign(zero,v3);
if(FIRST_FID)
{
HHmix = pbox_mix("HHmix", "DIPSI2", mixpwr, pw*compH, tpwr);
if(c1d[A] == 'n')
{
opx("CHdec"); setwave("WURST2 30k/1.2m"); pbox_par("steps","600"); cpx(pwC*compC, pwClvl);
CHdec = getDsh("CHdec");
}
}
ncyc = (int) (at/HHmix.pw) + 1;
post_del = ncyc*HHmix.pw - at;
/* BEGIN PULSE SEQUENCE */
status(A);
zgradpulse(gzlvl0, gt0);
rgpulse(pw, zero, 0.0, 0.0); /* destroy H-1 magnetization*/
zgradpulse(gzlvl0, gt0);
delay(1.0e-4);
obspower(tpwr);
txphase(v1);
decphase(zero);
dec2phase(zero);
presat();
obspower(tpwr);
delay(1.0e-5);
status(B);
if(c1d[A] == 'y')
{
rgpulse(pw,v1,0.0,0.0); /* 1H pulse excitation */
delay(d2);
rgpulse(pw,two,0.0,0.0); /* 1H pulse excitation */
assign(oph,v3);
}
else
{
decunblank(); pbox_decon(&CHdec);
rgpulse(pw,v1,0.0,0.0); /* 1H pulse excitation */
txphase(zero);
delay(d2);
pbox_decoff(); decblank();
decpower(pwClvl); decpwrf(4095.0);
delay(tau1 - POWER_DELAY);
simpulse(2.0*pw, 2.0*pwC, zero, zero, 0.0, 0.0);
txphase(one); decphase(one); dec2phase(one);
delay(tau1);
simpulse(pw, pwC, one, one, 0.0, 0.0);
txphase(zero); decphase(zero); dec2phase(zero);
delay(tau1);
simpulse(2.0*pw, 2.0*pwC, zero, zero, 0.0, 0.0);
delay(tau1);
simpulse(0.0, pwC, zero, zero, 0.0, 0.0);
}
zgradpulse(gzlvl1, gt1);
delay(grec);
simpulse(0.0, pwC, zero, v3, 0.0, rof2);
txphase(v2);
obsunblank(); pbox_xmtron(&HHmix);
status(C);
setactivercvrs("ny");
startacq(alfa);
acquire(np,1.0/sw);
endacq();
delay(post_del);
pbox_xmtroff(); obsblank();
zgradpulse(gzlvl2, gt2);
obspower(tpwr);
delay(grec);
rgpulse(pw,zero,0.0,rof2); /* 1H pulse excitation */
status(D);
setactivercvrs("yn");
startacq(alfa);
acquire(np,1.0/sw);
endacq();
}
pulsesequence()
{
/* DECLARE VARIABLES */
char autocal[MAXSTR], /* auto-calibration flag */
fsat[MAXSTR],
fscuba[MAXSTR],
f1180[MAXSTR], /* Flag to start t1 @ halfdwell */
mess_flg[MAXSTR], /* water purging */
ar180a[MAXSTR], /* waveform shape for aromatic 180 pulse
with C transmitter at dof */
cb180b[MAXSTR], /* waveform shape for aliphatic 180 pulse
with C transmitter at dofar */
ar180b[MAXSTR]; /* waveform shape for aromatic 180 pulse
with C transmitter at dofar */
int phase, ni,
t1_counter; /* used for states tppi in t1 */
double tau1, /* t1 delay */
taua, /* ~ 1/4JCbHb = 1.7 ms */
taub, /* ~ 1/4JCgCd = 2.7 ms */
tauc, /* ~ 1/4JCgCd = 2.1 ms */
taud, /* ~ 1/4JCdHd = 1.5 ms */
taue, /* = 1/4JCbHb = 1.8 ms */
tauf, /* 2(tauc-tauf) ~ 1/2JCdHd = 3.1 ms */
TCb, /* carbon constant time period
for recording the Cb chemical shifts */
dly_pg1, /* delay for water purging */
pwar180a, /* 180 aro pulse at d_ar180a and dof */
pwcb180b, /* 180 cb pulse at d_cb180b and dofar */
pwC, /* 90 c pulse at pwClvl */
pwsel90, /* 90 c pulse at d_sel90 */
pwar180b, /* 180 c pulse at d_ar180b */
compC, /* C-13 RF calibration parameters */
compH,
d_ar180a,
d_cb180b,
d_sel90,
d_ar180b,
dofar,
tsatpwr, /* low level 1H trans.power for presat */
tpwrmess, /* power level for water purging */
tpwrml, /* power level for 1H decoupling */
pwmlev, /* 90 pulse at tpwrml */
pwClvl, /* power level for high power 13C pulses on dec1 */
sw1, /* sweep width in f1 */
at,
gp11, /* gap between 90-90 for selective 180 of Cb */
fab, /* chemical shift difference of Ca-Cb (Hz) */
gt0,
gt1,
gt2,
gt3,
gt4,
gt5,
gt6,
gt7,
gstab,
gzlvl0,
gzlvl1,
gzlvl2,
gzlvl3,
gzlvl4,
gzlvl5,
gzlvl6,
gzlvl7;
/* variables commented out are already defined by the system */
/* LOAD VARIABLES */
getstr("autocal",autocal);
getstr("fsat",fsat);
getstr("f1180",f1180);
getstr("fscuba",fscuba);
getstr("mess_flg",mess_flg);
taua = getval("taua");
taub = getval("taub");
tauc = getval("tauc");
taud = getval("taud");
taue = getval("taue");
tauf = getval("tauf");
TCb = getval("TCb");
pwC = getval("pwC");
dofar = getval("dofar");
dly_pg1 = getval("dly_pg1");
tpwr = getval("tpwr");
tsatpwr = getval("tsatpwr");
tpwrmess = getval("tpwrmess");
tpwrml = getval("tpwrml");
pwClvl = getval("pwClvl");
dpwr = getval("dpwr");
phase = (int) ( getval("phase") + 0.5);
sw1 = getval("sw1");
ni = getval("ni");
at = getval("at");
fab = getval("fab");
if(autocal[0]=='n')
{
getstr("ar180a",ar180a);
getstr("ar180b",ar180b);
getstr("cb180b",cb180b);
pwar180a = getval("pwar180a");
pwar180b = getval("pwar180b");
pwcb180b = getval("pwcb180b");
pwsel90 = getval("pwsel90");
d_ar180a = getval("d_ar180a");
d_cb180b = getval("d_cb180b");
d_ar180b = getval("d_ar180b");
d_sel90 = getval("d_sel90");
pwmlev = getval("pwmlev");
}
else
{
strcpy(ar180a,"Pg3_off_cb180a");
strcpy(ar180b,"Pg3_off_cb180b");
strcpy(cb180b,"Pg3_on");
if (FIRST_FID)
{
compC = getval("compC");
compH = getval("compH");
sel90 = pbox("cal", SEL90, "", dfrq, compC*pwC, pwClvl);
ar_180a = pbox(ar180a, AR180a, CB180ps, dfrq, compC*pwC, pwClvl);
ar_180b = pbox(ar180b, AR180b, CB180ps, dfrq, compC*pwC, pwClvl);
cb_180b = pbox(cb180b, CB180b, CB180ps, dfrq, compC*pwC, pwClvl);
w16 = pbox_dec("cal", "WALTZ16", tpwrml, sfrq, compH*pw, tpwr);
}
pwsel90 = sel90.pw; d_sel90 = sel90.pwr;
pwar180a = ar_180a.pw; d_ar180a = ar_180a.pwr;
pwar180b = ar_180b.pw; d_ar180b = ar_180b.pwr;
pwcb180b = cb_180b.pw; d_cb180b = cb_180b.pwr;
pwmlev = 1.0/w16.dmf;
}
gt0 = getval("gt0");
gt1 = getval("gt1");
gt2 = getval("gt2");
gt3 = getval("gt3");
gt4 = getval("gt4");
gt5 = getval("gt5");
gt6 = getval("gt6");
gstab = getval("gstab");
gt7 = getval("gt7");
gzlvl0 = getval("gzlvl0");
gzlvl1 = getval("gzlvl1");
gzlvl2 = getval("gzlvl2");
gzlvl3 = getval("gzlvl3");
gzlvl4 = getval("gzlvl4");
gzlvl5 = getval("gzlvl5");
gzlvl6 = getval("gzlvl6");
gzlvl7 = getval("gzlvl7");
/* LOAD PHASE TABLE */
settable(t1,1,phi1);
settable(t2,1,phi2);
settable(t3,4,phi3);
settable(t4,8,phi4);
settable(t5,1,phi5);
settable(t6,8,rec);
/* CHECK VALIDITY OF PARAMETER RANGES */
if( 0.5*ni*1/(sw1) > TCb - 2*POWER_DELAY
- WFG_START_DELAY - pwar180a - WFG_STOP_DELAY)
{
printf(" ni is too big\n");
psg_abort(1);
}
if((dm[A] == 'y' || dm[B] == 'y' ))
{
printf("incorrect dec1 decoupler flags! ");
psg_abort(1);
}
if(dm2[A] == 'y' || dm2[B] == 'y' || dm2[C] == 'y' )
{
printf("incorrect dec2 decoupler flags! ");
psg_abort(1);
}
if( tsatpwr > 6 )
{
printf("TSATPWR too large !!! ");
psg_abort(1);
}
if( tpwrml > 53 )
{
printf("tpwrml too large !!! ");
psg_abort(1);
}
if( tpwrmess > 56 )
{
printf("tpwrmess too large !!! ");
psg_abort(1);
}
if( dpwr > 50 )
{
printf("don't fry the probe, DPWR too large! ");
psg_abort(1);
}
if( dpwr2 > 50 )
{
printf("don't fry the probe, DPWR2 too large! ");
psg_abort(1);
}
if( pwClvl > 63 )
{
printf("don't fry the probe, DHPWR too large! ");
psg_abort(1);
}
if( pw > 20.0e-6 )
{
printf("dont fry the probe, pw too high ! ");
psg_abort(1);
}
if( pwcb180b > 500.0e-6 )
{
printf("dont fry the probe, pwcb180b too high ! ");
psg_abort(1);
}
if( pwar180a > 500.0e-6 )
{
printf("dont fry the probe, pwar180a too high ! ");
psg_abort(1);
}
if (pwar180b > 500.0e-6)
{
printf("dont fry the probe, pwar180b too long !");
psg_abort(1);
}
if (pwsel90 > 100.0e-6)
{
printf("dont fry the probe, pwsel90 too long !");
psg_abort(1);
}
if(d_ar180a > 60)
{
printf("dont fry the probe, d_ar180a too high !");
psg_abort(1);
}
if(d_cb180b > 60)
{
printf("dont fry the probe, d_cb180b too high !");
psg_abort(1);
}
if (d_ar180b > 60)
{
printf("dont fry the probe, d_ar180b too high ! ");
psg_abort(1);
}
if (d_sel90 > 50)
{
printf("dont fry the probe, d_sel90 too high ! ");
psg_abort(1);
}
if( gt0 > 15e-3 || gt1 > 15e-3 || gt2 > 15e-3 || gt3 > 15e-3
|| gt4 > 15e-3 || gt5 > 15e-3 || gt6 > 15e-3 || gt7 > 15e-3)
{
printf("gradients on for too long. Must be < 15e-3 \n");
psg_abort(1);
}
if( fabs(gzlvl0) > 30000 || fabs(gzlvl1) > 30000 || fabs(gzlvl2) > 30000
||fabs(gzlvl3) > 30000 || fabs(gzlvl4) > 30000 || fabs(gzlvl5) > 30000
||fabs(gzlvl6) > 30000 || fabs(gzlvl7) > 30000)
{
printf("too strong gradient");
psg_abort(1);
}
if( 2*TCb - taue > 0.1 )
{
printf("dont fry the probe, too long TCb");
psg_abort(1);
}
if( at > 0.1 && (dm[C]=='y' || dm2[C]=='y'))
{
printf("dont fry the probe, too long at with decoupling");
psg_abort(1);
}
if( pwC > 30.0e-6)
{
printf("dont fry the probe, too long pwC");
psg_abort(1);
}
if( dly_pg1 > 10.0e-3)
{
printf("dont fry the probe, too long dly_pg1");
psg_abort(1);
}
/* Phase incrementation for hypercomplex 2D data */
if (phase == 2)
tsadd(t2,1,4);
/* Calculate modifications to phases for States-TPPI acquisition */
if( ix == 1) d2_init = d2 ;
t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
if(t1_counter % 2) {
tsadd(t2,2,4);
tsadd(t6,2,4);
}
/* Set up f1180 tau1 = t1 */
tau1 = d2;
if(f1180[A] == 'y') {
tau1 += ( 1.0 / (2.0*sw1) );
}
tau1 = tau1/2.0;
/* 90-90 pulse for selective 180 of Cb but not Ca */
gp11 = 1/(2*fab) - 4/PI*pwsel90;
if (gp11 < 0.0) {
printf("gap of 90-90 negative, check fab and pwsel90");
psg_abort(1);
}
/* BEGIN ACTUAL PULSE SEQUENCE */
/* Receiver off time */
status(A);
decoffset(dof);
obspower(tsatpwr); /* Set transmitter power for 1H presaturation */
decpower(pwClvl); /* Set Dec1 power for hard 13C pulses */
dec2power(dpwr2); /* Set Dec2 power for 15N decoupling */
/* Presaturation Period */
if(mess_flg[A] == 'y') {
obspower(tpwrmess);
rgpulse(dly_pg1,zero,20.0e-6,20.0e-6);
rgpulse(dly_pg1/1.62,one,20.0e-6,20.0e-6);
obspower(tsatpwr);
}
if (fsat[0] == 'y')
{
delay(2.0e-5);
rgpulse(d1,zero,20.0e-6,20.0e-6);
obspower(tpwr); /* Set transmitter power for hard 1H pulses */
delay(2.0e-5);
if(fscuba[0] == 'y')
{
delay(2.2e-2);
rgpulse(pw,zero,2.0e-6,0.0);
rgpulse(2*pw,one,2.0e-6,0.0);
rgpulse(pw,zero,2.0e-6,0.0);
delay(2.2e-2);
}
}
else
{
delay(d1);
}
obspower(tpwr); /* Set transmitter power for hard 1H pulses */
txphase(zero);
dec2phase(zero);
decphase(zero);
delay(1.0e-5);
/* Begin Pulses */
rcvroff();
delay(10.0e-6);
/* first ensure that magnetization does infact start on H and not C */
decrgpulse(pwC,zero,2.0e-6,2.0e-6);
delay(2.0e-6);
zgradpulse(gzlvl0,gt0);
delay(gstab);
/* this is the real start */
rgpulse(pw,zero,0.0,0.0); /* 90 deg 1H pulse */
delay(2.0e-6);
zgradpulse(gzlvl1,gt1);
delay(2.0e-6);
delay(taua - gt1 - 4.0e-6); /* taua <= 1/4JCH */
simpulse(2*pw,2*pwC,zero,zero,0.0,0.0);
txphase(t1);
delay(2.0e-6);
zgradpulse(gzlvl1,gt1);
delay(2.0e-6);
delay(taua - gt1 - 4.0e-6);
rgpulse(pw,t1,0.0,0.0);
txphase(zero);
delay(2.0e-6);
zgradpulse(gzlvl2,gt2);
delay(gstab);
decphase(t2);
decpower(d_sel90);
decrgpulse(pwsel90,t2,2.0e-6,0.0);
decphase(zero);
decpower(d_ar180a);
decshaped_pulse(ar180a,pwar180a,zero,2.0e-6,0.0); /* bs effect */
delay(taue
- POWER_DELAY - 2.0e-6 - WFG_START_DELAY - pwar180a - WFG_STOP_DELAY
- POWER_DELAY - PRG_START_DELAY);
/* H decoupling on */
obspower(tpwrml);
obsprgon("waltz16",pwmlev,90.0);
xmtron(); /* TURN ME OFF DONT FORGET */
/* Hldecoupling on */
delay(TCb + tau1 - taue - POWER_DELAY - 2.0e-6);
decphase(t3);
decpower(d_sel90);
decrgpulse(pwsel90,t3,2.0e-6,0.0);
delay(gp11);
decrgpulse(pwsel90,t3,0.0,0.0);
decphase(zero);
decpower(d_ar180a);
decshaped_pulse(ar180a,pwar180a,zero,2.0e-6,0.0);
delay(TCb - tau1
- POWER_DELAY - WFG_START_DELAY - 2.0e-6 - pwar180a - WFG_STOP_DELAY
- POWER_DELAY - 2.0e-6);
decphase(zero);
decpower(d_sel90);
decrgpulse(pwsel90,zero,2.0e-6,0.0);
/* H decoupling off */
xmtroff();
obsprgoff();
obspower(tpwr);
/* H decoupling off */
decoffset(dofar);
delay(2.0e-6);
zgradpulse(gzlvl3,gt3);
delay(gstab);
decphase(t4);
decpower(d_sel90);
decrgpulse(pwsel90,t4,2.0e-6,0.0);
decphase(zero);
decpower(d_cb180b);
decshaped_pulse(cb180b,pwcb180b,zero,2.0e-6,0.0); /* B.S. */
delay(2.0e-6);
zgradpulse(gzlvl4,gt4);
delay(2.0e-6);
delay(taub
- POWER_DELAY - WFG_START_DELAY - 2.0e-6 - pwcb180b - WFG_STOP_DELAY
- gt4 - 4.0e-6
- POWER_DELAY - WFG_START_DELAY - 2.0e-6);
decphase(zero);
decpower(d_ar180b);
decshaped_pulse(ar180b,pwar180b,zero,2.0e-6,0.0);
decpower(d_cb180b);
decshaped_pulse(cb180b,pwcb180b,zero,2.0e-6,0.0);
delay(2.0e-6);
zgradpulse(gzlvl4,gt4);
delay(2.0e-6);
delay(taub
- WFG_STOP_DELAY
- POWER_DELAY - WFG_START_DELAY - 2.0e-6 - pwcb180b - WFG_STOP_DELAY
- gt4 - 4.0e-6
- POWER_DELAY - 2.0e-6);
decpower(d_sel90);
decrgpulse(pwsel90,zero,2.0e-6,0.0);
delay(2.0e-6);
zgradpulse(gzlvl5,gt5);
delay(100.0e-6);
delay(tauc - POWER_DELAY - gt5 - 102.0e-6 - 2.0e-6);
decphase(t5);
decpower(pwClvl);
decrgpulse(2*pwC,t5,2.0e-6,0.0);
delay(2.0e-6);
zgradpulse(gzlvl5,gt5);
delay(100.0e-6);
txphase(zero);
delay(tauf - gt5 - 102.0e-6);
rgpulse(2*pw,zero,0.0,0.0);
delay(tauc - tauf - 2*pw
- POWER_DELAY - 2.0e-6);
decphase(zero);
decpower(d_sel90);
decrgpulse(pwsel90,zero,2.0e-6,0.0);
txphase(zero);
delay(2.0e-6);
zgradpulse(gzlvl6,gt6);
delay(gstab);
rgpulse(pw,zero,0.0,0.0);
delay(2.0e-6);
zgradpulse(gzlvl7,gt7);
delay(2.0e-6);
delay(taud
- gt7 - 4.0e-6
- POWER_DELAY - 2.0e-6);
decphase(zero);
decpower(pwClvl);
simpulse(2*pw,2*pwC,zero,zero,2.0e-6,0.0);
delay(2.0e-6);
zgradpulse(gzlvl7,gt7);
delay(2.0e-6);
delay(taud
- gt7 - 4.0e-6
- 2*POWER_DELAY);
decpower(dpwr); /* Set power for decoupling */
dec2power(dpwr2); /* Set power for decoupling */
rgpulse(pw,zero,0.0,0.0);
/* rcvron(); */ /* Turn on receiver to warm up before acq */
/* BEGIN ACQUISITION */
status(C);
setreceiver(t6);
}
pulsesequence()
{
void makeHHdec(), makeCdec(); /* utility functions */
int ihh=1, /* used in HH decoupling to improve water suppression */
t1_counter;
char C13refoc[MAXSTR], /* C13 sech/tanh pulse in middle of t1 */
Hdecflg[MAXSTR], /* HH-h**o decoupling flag */
Cdecflg[MAXSTR], /* low power C-13 decoupling flag */
TROSY[MAXSTR],
wtg3919[MAXSTR];
double tauxh, tau1,
pwNt = 0.0, /* pulse only active in the TROSY option */
gsign = 1.0,
/* temporary Pbox parameters */
bw, pws, ofs, ppm, nst, /* bandwidth, pulsewidth, offset, ppm, # steps */
gzlvl3=getval("gzlvl3"),
gt3=getval("gt3"),
JNH = getval("JNH"),
pwN = getval("pwN"),
pwNlvl = getval("pwNlvl"),
pwHs, tpwrs=0.0, compH=1.0, /* H1 90 degree pulse length at tpwrs */
sw1 = getval("sw1"),
pwClvl = getval("pwClvl"), /* coarse power for C13 pulse */
pwC = getval("pwC"), /* C13 90 degree pulse length at pwClvl */
rfst = 4095.0, /* fine power for the stCall pulse */
compC = getval("compC"), /* adjustment for C13 amplifier compr-n */
tpwrsf = getval("tpwrsf"); /* adjustment for soft pulse power*/
/* INITIALIZE VARIABLES */
getstr("C13refoc",C13refoc);
getstr("TROSY",TROSY);
getstr("wtg3919",wtg3919);
getstr("Hdecflg", Hdecflg);
getstr("Cdecflg", Cdecflg);
if(wtg3919[0] != 'y') /* selective H20 one-lobe sinc pulse needs 1.69 */
{ /* times more power than a square pulse */
pwHs = getval("pwHs");
compH = getval("compH");
}
else
pwHs = pw*2.385+7.0*rof1+d3*2.5;
tauxh = ((JNH != 0.0) ? 1/(4*(JNH)) : 2.25e-3);
setautocal(); /* activate auto-calibration flags */
if (autocal[0] == 'n')
{
if (C13refoc[A]=='y')
{
/* 180 degree adiabatic C13 pulse from 0 to 200 ppm */
rfst = (compC*4095.0*pwC*4000.0*sqrt((30.0*sfrq/600.0+7.0)/0.35));
rfst = (int) (rfst + 0.5);
if ( 1.0/(4000.0*sqrt((30.0*sfrq/600.0+7.0)/0.35)) < pwC )
{ text_error( " Not enough C13 RF. pwC must be %f usec or less.\n",
(1.0e6/(4000.0*sqrt((30.0*sfrq/600.0+7.0)/0.35))) ); psg_abort(1); }
}
if(wtg3919[0] != 'y') /* selective H20 one-lobe sinc pulse needs 1.69 */
{ /* times more power than a square pulse */
if (pwHs > 1e-6) tpwrs = tpwr - 20.0*log10(pwHs/(compH*pw*1.69));
else tpwrs = 0.0;
tpwrs = (int) (tpwrs);
}
}
else /* if autocal = 'y'(yes), 'q'(quiet), r(read), or 's'(semi) */
{
if(FIRST_FID) /* call Pbox */
{
if (C13refoc[A]=='y')
{
ppm = getval("dfrq"); ofs = 0.0; pws = 0.001; /* 1 ms long pulse */
bw = 200.0*ppm; nst = 1000; /* nst - number of steps */
stC200 = pbox_makeA("stC200", "sech", bw, pws, ofs, compC*pwC, pwClvl, nst);
C13ofs = 100.0;
}
if(wtg3919[0] != 'y')
H2Osinc = pbox_Rsh("H2Osinc", "sinc90", pwHs, 0.0, compH*pw, tpwr);
ofs_check(H1ofs, C13ofs, N15ofs, H2ofs);
}
if (C13refoc[A]=='y') rfst = stC200.pwrf;
if (wtg3919[0] != 'y')
{
pwHs = H2Osinc.pw; tpwrs = H2Osinc.pwr-1.0; /* 1dB correction applied */
}
}
if (tpwrsf<4095.0) tpwrs = tpwrs + 6.0;
tauxh = ((JNH != 0.0) ? 1/(4*(JNH)) : 2.25e-3);
if(Cdecflg[0] == 'y') makeCdec(); /* make shapes for HH h**o-decoupling */
if(Hdecflg[0] == 'y') makeHHdec();
if(Hdecflg[0] != 'n') ihh = -3;
/* check validity of parameter range */
if((dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y' ))
{ text_error("incorrect Dec1 decoupler flags! "); psg_abort(1); }
if((dm2[A] == 'y' || dm2[B] == 'y') )
{ text_error("incorrect Dec2 decoupler flags! "); psg_abort(1); }
if( dpwr > 0 )
{ text_error("don't fry the probe, dpwr too large! "); psg_abort(1); }
if( dpwr2 > 50 )
{ text_error("don't fry the probe, dpwr2 too large! "); psg_abort(1); }
if ((TROSY[A]=='y') && (dm2[C] == 'y'))
{ text_error("Choose either TROSY='n' or dm2='n' ! "); psg_abort(1); }
/* LOAD VARIABLES */
if(ix == 1) d2_init = d2;
t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5);
tau1 = d2/2.0 - pw;
if(tau1 < 0.0) tau1 = 0.0;
/* LOAD PHASE TABLES */
settable(t6, 4, recT);
if (TROSY[A] == 'y')
{ gsign = -1.0;
pwNt = pwN;
assign(zero,v7);
assign(two,v8);
settable(t1, 1, phT1);
settable(t2, 4, phT2);
settable(t3, 1, phT4);
settable(t4, 1, phT4);
settable(t5, 4, recT); }
else
{ assign(one,v7);
assign(three,v8);
settable(t1, 4, phi1);
settable(t2, 2, phi2);
settable(t3, 8, phi3);
settable(t4, 1, phi4);
settable(t5, 8, rec); }
if ( phase1 == 2 ) /* Hypercomplex in t1 */
{ if (TROSY[A] == 'y')
{ tsadd(t3, 2, 4); tsadd(t5, 2, 4); }
else tsadd(t2, 1, 4); }
if(t1_counter %2) /* calculate modification to phases based on */
{ tsadd(t2,2,4); tsadd(t5,2,4); tsadd(t6,2,4); } /* current t1 values */
if(wtg3919[0] != 'y')
{ add(one,v7,v7); add(one,v8,v8); }
/* sequence starts!! */
status(A);
obspower(tpwr);
dec2power(pwNlvl);
decpower(pwClvl);
decpwrf(rfst);
if(Hdecflg[0] != 'n')
{
delay(5.0e-5);
rgpulse(pw,zero,rof1,0.0);
rgpulse(pw,one,0.0,rof1);
zgradpulse(1.5*gzlvl3, 0.5e-3);
delay(5.0e-4);
rgpulse(pw,zero,rof1,0.0);
rgpulse(pw,one,0.0,rof1);
zgradpulse(-gzlvl3, 0.5e-3);
}
delay(d1);
rcvroff();
status(B);
rgpulse(pw, zero, rof1, rof1);
zgradpulse(0.3*gzlvl3,gt3);
txphase(zero);
dec2phase(zero);
delay(tauxh-gt3); /* delay=1/4J(XH) */
sim3pulse(2*pw,0.0,2*pwN,t4,zero,zero,rof1,rof1);
zgradpulse(0.3*gzlvl3,gt3);
dec2phase(t2);
delay(tauxh-gt3 ); /* delay=1/4J(XH) */
rgpulse(pw, t1, rof1, rof1);
zgradpulse(0.5*gsign*ihh*gzlvl3,gt3);
delay(200.0e-6);
decphase(zero);
if (TROSY[A] == 'y')
{
txphase(t3);
if ( phase1 == 2 )
dec2rgpulse(pwN, t6, rof1, 0.0);
else
dec2rgpulse(pwN, t2, rof1, 0.0);
if ( (C13refoc[A]=='y') && (d2 > 1.0e-3 + 2.0*WFG2_START_DELAY) )
{
delay(d2/2.0 - 0.5e-3 - WFG2_START_DELAY);
decshaped_pulse("stC200", 1.0e-3, zero, 0.0, 0.0);
delay(d2/2.0 - 0.5e-3 - WFG2_STOP_DELAY);
}
else
delay(d2);
rgpulse(pw, t3, 0.0, rof1);
zgradpulse(0.65*gzlvl3,gt3);
delay(tauxh-gt3 );
sim3pulse(2*pw,0.0,2*pwN,zero,zero,zero,rof1,rof1);
zgradpulse(0.65*gzlvl3,gt3);
delay(tauxh-gt3 );
sim3pulse(pw,0.0,pwN,zero,zero,t3,rof1,rof1);
}
else
{
txphase(t4);
dec2rgpulse(pwN, t2, rof1, 0.0);
if ( (C13refoc[A]=='y') && (tau1 > 0.5e-3 + WFG2_START_DELAY) )
{
delay(tau1 - 0.5e-3 - WFG2_START_DELAY);
simshaped_pulse("", "stC200", 2.0*pw, 1.0e-3, t4, zero, 0.0, 0.0);
dec2phase(t3);
delay(tau1 - 0.5e-3 - WFG2_STOP_DELAY);
}
else
{
delay(tau1);
rgpulse(2.0*pw, t4, 0.0, 0.0);
dec2phase(t3);
delay(tau1);
}
dec2rgpulse(pwN, t3, 0.0, 0.0);
zgradpulse(0.5*gzlvl3,gt3);
delay(200.0e-6);
rgpulse(pw, two, rof1, rof1);
}
zgradpulse(gzlvl3,gt3);
txphase(v7); dec2phase(zero);
delay(tauxh-gt3-pwHs-rof1+5.0e-5);
if(wtg3919[0] == 'y')
{
rgpulse(pw*0.231,v7,rof1,rof1);
delay(d3);
rgpulse(pw*0.692,v7,rof1,rof1);
delay(d3);
rgpulse(pw*1.462,v7,rof1,rof1);
delay(d3/2-pwN);
dec2rgpulse(2*pwN, zero, rof1, rof1);
txphase(v8);
delay(d3/2-pwN);
rgpulse(pw*1.462,v8,rof1,rof1);
delay(d3);
rgpulse(pw*0.692,v8,rof1,rof1);
delay(d3);
rgpulse(pw*0.231,v8,rof1,rof1);
}
else
{
obspower(tpwrs); if (tpwrsf<4095.0) obspwrf(tpwrsf);
shaped_pulse("H2Osinc", pwHs, v7, rof1, 0.0);
obspower(tpwr); if (tpwrsf<4095.0) obspwrf(4095.0);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, v8, zero, zero, 0.0, 0.0);
obspower(tpwrs); if (tpwrsf<4095.0)obspwrf(tpwrsf);
shaped_pulse("H2Osinc", pwHs, v7, rof1, 0.0);
obspower(tpwr); if (tpwrsf<4095.0)obspwrf(4095.0);
}
zgradpulse(gzlvl3,gt3);
if(Cdecflg[0] == 'y')
{
delay(tauxh-gt3-pwHs-rof1-pwNt-3.0*POWER_DELAY-PRG_START_DELAY);
dec2rgpulse(pwNt, zero, rof1, rof1);
dec2power(dpwr2);
rcvron();
statusdelay(C,5.0e-5);
setreceiver(t5);
pbox_decon(&Cdseq);
if(Hdecflg[0] == 'y')
homodec(&HHdseq);
}
else
{
delay(tauxh-gt3-pwHs-rof1-pwNt-POWER_DELAY);
dec2rgpulse(pwNt, zero, rof1, rof1);
dec2power(dpwr2);
rcvron();
statusdelay(C,5.0e-5);
setreceiver(t5);
if(Hdecflg[0] == 'y')
homodec(&HHdseq);
}
}
void pulsesequence()
{
/* DECLARE AND LOAD VARIABLES; parameters used in the last half of the */
/* sequence are declared and initialized as 0.0 in bionmr.h, and */
/* reinitialized below */
char f2180[MAXSTR], /* Flag to start t2 @ halfdwell */
fil_flg1[MAXSTR],
had_flg[MAXSTR],
shname1[MAXSTR],
shname2[MAXSTR],
ala_flg[MAXSTR],
ser_flg[MAXSTR],
SE_flg[MAXSTR], /* SE_flg */
TROSY[MAXSTR]; /* do TROSY on N15 and H1 */
int t2_counter, /* used for states tppi in t2 */
ni2 = getval("ni2");
double d3_init=0.0, /* used for states tppi in t2 */
stCwidth = 80.0,
shpw1,shpw2, /* t1 delay */
tauCH = getval("tauCH"), /* 1/4J delay for CH */
tauC1 = getval("tauC1"),
tauC2 = getval("tauC2"),
tauC3 = getval("tauC3"),
had2,had3,
timeTN = getval("timeTN"), /* constant time for 15N evolution */
eta = 4.6e-3,
theta = 14.0e-3,
pwClvl = getval("pwClvl"), /* coarse power for C13 pulse */
pwC = getval("pwC"), /* C13 90 degree pulse length at pwClvl */
pwS1, pwS2, pwS3, pwS4, pwS5,pwS6,pwS7,
phi7cal = getval("phi7cal"), /* phase in degrees of the last C13 90 pulse */
pwNlvl = getval("pwNlvl"), /* power for N15 pulses */
pwN = getval("pwN"), /* N15 90 degree pulse length at pwNlvl */
sw2 = getval("sw2"),
gt3 = getval("gt3"),
gt5 = getval("gt5"),
gstab = getval("gstab"),
gzlvl0 = getval("gzlvl0"),
gzlvl3 = getval("gzlvl3"),
gzlvl5 = getval("gzlvl5"),
flip_angle=120.0,had1=0.0,
epsilon = getval("epsilon");
fil_flg1[0]='n';
ser_flg[0]='n'; /*initialize*/
getstr("f2180",f2180);
getstr("had_flg",had_flg);
getstr("shname1",shname1);
getstr("shname2",shname2);
getstr("TROSY",TROSY);
getstr("SE_flg",SE_flg);
/* LOAD PHASE TABLE */
settable(t1,4,phi1);
settable(t3,4,phi3);
settable(t4,1,phx);
settable(t5,2,phi5);
settable(t6,2,phi6);
settable(t8,1,phx);
settable(t9,8,phi9);
settable(t10,1,phx);
settable(t11,1,phy);
settable(t12,8,phi12);
settable(t13,8,rec2);
/* INITIALIZE VARIABLES */
shpw1 = pw*8.0;
shpw2 = pwC*8.0;
kappa = 5.4e-3;
lambda = 2.4e-3;
had2=0.5/135.0;
had3=0.5/135.0;
ala_flg[0]='n';
if (had_flg[0] == '1')
{ fil_flg1[0]='n';ser_flg[0]='n';flip_angle=120.0;had1=0.0;}
if (had_flg[0] == '2')
{ fil_flg1[0]='y';ser_flg[0]='n';flip_angle=120.0;had1=0.0;}
if (had_flg[0] == '3')
{ fil_flg1[0]='n';ser_flg[0]='y';flip_angle=120.0;had1=0.0;}
if (had_flg[0] == '4')
{ fil_flg1[0]='y';ser_flg[0]='y';flip_angle=120.0;had1=0.0;}
if (had_flg[0] == '5')
{ fil_flg1[0]='n';ser_flg[0]='n';flip_angle=60.0;had1=0.5/140.0;}
if (had_flg[0] == '6')
{ fil_flg1[0]='y';ser_flg[0]='n';flip_angle=60.0;had1=0.5/140.0;}
if (had_flg[0] == '7')
{ fil_flg1[0]='n';ser_flg[0]='y';flip_angle=60.0;had1=0.5/140.0;}
if (had_flg[0] == '8')
{ fil_flg1[0]='y';ser_flg[0]='y';flip_angle=60.0;had1=0.5/140.0;}
if( pwC > 20.0*600.0/sfrq )
{ printf("increase pwClvl so that pwC < 20*600/sfrq");
psg_abort(1); }
/* get calculated pulse lengths of shaped C13 pulses */
pwS1 = c13pulsepw("cab", "co", "square", 90.0);
pwS2 = c13pulsepw("ca", "co", "square", 180.0);
pwS3 = c13pulsepw("co", "ca", "sinc", 180.0);
pwS4 = c_shapedpw("isnob5",80.0,0.0,zero, 2.0e-6, 2.0e-6);
pwS6 = c_shapedpw("reburp",80.0,0.0,zero, 2.0e-6, 2.0e-6); /* attention, y a aussi des 180 CaCb après les filtres*/
pwS7 = c_shapedpw(shname2,80.0,150.0,zero, 2.0e-6, 2.0e-6);
pwS5 = c_shapedpw("isnob5",30.0,0.0,zero, 2.0e-6, 2.0e-6);
/* CHECK VALIDITY OF PARAMETER RANGES */
if ( 0.5*ni2*1/(sw2) > timeTN - WFG3_START_DELAY)
{ printf(" ni2 is too big. Make ni2 equal to %d or less.\n",
((int)((timeTN - WFG3_START_DELAY)*2.0*sw2))); psg_abort(1);}
if ( dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y' )
{ printf("incorrect dec1 decoupler flags! Should be 'nnn' "); psg_abort(1);}
if ( dm2[A] == 'y' || dm2[B] == 'y' )
{ printf("incorrect dec2 decoupler flags! Should be 'nny' "); psg_abort(1);}
if ( dm3[A] == 'y' || dm3[C] == 'y' )
{ printf("incorrect dec3 decoupler flags! Should be 'nyn' or 'nnn' ");
psg_abort(1);}
if ( dpwr2 > 46 )
{ printf("dpwr2 too large! recheck value "); psg_abort(1);}
if ( pw > 20.0e-6 )
{ printf(" pw too long ! recheck value "); psg_abort(1);}
if ( pwN > 100.0e-6 )
{ printf(" pwN too long! recheck value "); psg_abort(1);}
if ( TROSY[A]=='y' && dm2[C] == 'y' )
{ text_error("Choose either TROSY='n' or dm2='n' ! "); psg_abort(1);}
/* PHASES AND INCREMENTED TIMES */
/* Phase incrementation for hypercomplex 2D data, States-Haberkorn element */
if (TROSY[A]=='y')
{ if (phase2 == 2) icosel = +1;
else {tsadd(t4,2,4); tsadd(t10,2,4); icosel = -1;}
}
else {
if (SE_flg[0]=='y')
{
if (phase2 == 2) {tsadd(t10,2,4); icosel = +1;}
else icosel = -1;
}
else { if (phase2 == 2) {tsadd(t8,1,4); }
}
}
/* Set up f2180 */
tau2 = d3; /* run 2D exp for NH correlation, but must use tau2 instead of tau1
because bionmr.h is written for nh_evol* to do tau2 evolution*/
if((f2180[A] == 'y') && (ni2 > 1.0)) /* use f2180 to control tau2 */
{ tau2 += ( 1.0 / (2.0*sw2) ); if(tau2 < 0.2e-6) tau2 = 0.0; }
tau2 = tau2/2.0;
/* Calculate modifications to phases for States-TPPI acquisition */
if( ix == 1) d3_init = d3;
t2_counter = (int) ( (d3-d3_init)*sw1 + 0.5 );
if(t2_counter % 2)
{ tsadd(t8,2,4); tsadd(t12,2,4); tsadd(t13,2,4); }
/* BEGIN PULSE SEQUENCE */
status(A);
delay(d1);
if (dm3[B]=='y') lk_hold();
rcvroff();
set_c13offset("cab");
obsoffset(tof);
obspower(tpwr);
obspwrf(4095.0);
decpower(pwClvl);
decpwrf(4095.0);
dec2power(pwNlvl);
txphase(one);
delay(1.0e-5);
if (TROSY[A] == 'n')
dec2rgpulse(pwN, zero, 0.0, 0.0); /*destroy N15 and C13 magnetization*/
decrgpulse(pwC, zero, 0.0, 0.0);
zgradpulse(gzlvl0, 0.5e-3);
delay(gstab);
if (TROSY[A] == 'n')
dec2rgpulse(pwN, one, 0.0, 0.0);
decrgpulse(pwC, zero, 0.0, 0.0);
zgradpulse(0.7*gzlvl0, 0.5e-3);
delay(gstab);
if(dm3[B] == 'y') /*optional 2H decoupling on */
{dec3unblank(); dec3rgpulse(1/dmf3, one, 0.0, 0.0);
dec3unblank(); setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);}
rgpulse(pw, zero, 2.0e-6, 0.0);
zgradpulse(gzlvl5, gt5);
delay(tauCH - gt5 - WFG2_START_DELAY - 0.5e-3 + 68.0e-6 );
sim_c13adiab_inv_pulse("", "aliph", stCwidth, "sech1", 2.0*pw, 1.0e-3,
zero, zero, 2.0e-6, 2.0e-6);
zgradpulse(gzlvl5, gt5);
delay(tauCH - gt5 - 0.5e-3 + 68.0e-6);
rgpulse(pw, one, 0.0, 0.0);
if (ser_flg[0] == 'n' )
delay(pwS5);
if (ser_flg[0] == 'y' )
c_shapedpulse("isnob5",30.0,24.0,zero, 2.0e-6, 2.0e-6);
/*********************************** transfer CB->CA + DEPT CBH **************/
zgradpulse(gzlvl3, gt3*1.2);
delay(gstab);
decrgpulse(pwC, t3, 0.0, 0.0);
rgpulse(pw, three, 0.0, 0.0);
if (flip_angle > 90.0) delay(pw*(flip_angle/90.0-1));
if (fil_flg1[0] == 'y')
{
/* JCOCA & JCOCB is turned on*/
zgradpulse(gzlvl3, gt3);
delay(had2*0.5-pwS4*0.5-pwS7-gt3);
c_simshapedpulse(shname2,80.0,150.0,0.0,0.0,zero,zero,zero, 2.0e-6, 2.0e-6);
c_simshapedpulse("isnob5",80.0,0.0,pw*2.0,0.0,zero,zero,zero, 2.0e-6, 2.0e-6);
zgradpulse(gzlvl3, gt3);
delay(had2*0.5-pwS4*0.5-gt3);
rgpulse(pw*flip_angle/90.0, t1, 0.0, 0.0);
if (flip_angle < 90.0) delay(pw*(1-flip_angle/90.0));
zgradpulse(gzlvl3, 1.1*gt3);
delay(had3*0.5-shpw1*0.5-1.1*gt3);
shaped_pulse(shname1,shpw1,two,0.0,0.0);
delay((tauC3-(had2+pw*120/90*2))*0.5-pwS4*0.5-had3*0.5-shpw1*0.5-pwS7);
c_simshapedpulse(shname2,80.0,150.0,0.0,0.0,zero,zero,zero, 2.0e-6, 2.0e-6);
c_shapedpulse("isnob5",80.0,0.0,two, 2.0e-6, 2.0e-6);
zgradpulse(gzlvl3, 1.1*gt3);
delay((tauC3-(had2+pw*120/90*2))*0.5-pwS4*0.5-1.1*gt3);
}
if (fil_flg1[0] == 'n')
{
/* JCOCA & JCOCB is turned off*/
zgradpulse(gzlvl3, gt3);
delay(epsilon/4.0-pwS7*0.5-gt3);
c_simshapedpulse(shname2,80.0,150.0,0.0,0.0,zero,zero,zero, 2.0e-6, 2.0e-6);
delay(had2*0.5-pwS4*0.5-epsilon/4.0-pwS7*0.5);
c_simshapedpulse("isnob5",80.0,0.0,pw*2.0,0.0,zero,zero,zero, 2.0e-6, 2.0e-6);
zgradpulse(gzlvl3, gt3);
delay(had2*0.5-pwS4*0.5-gt3);
rgpulse(pw*flip_angle/90.0, t1, 0.0, 0.0);
if (flip_angle < 90.0) delay(pw*(1-flip_angle/90.0));
if (had3*0.5-shpw1*0.5-epsilon/4.0-pwS7*0.5>0.0)
{
zgradpulse(gzlvl3, 1.1*gt3);
delay(epsilon/4.0-pwS7*0.5-1.1*gt3);
c_simshapedpulse(shname2,80.0,150.0,0.0,0.0,zero,zero,zero, 2.0e-6, 2.0e-6);
delay(had3*0.5-shpw1*0.5-epsilon/4.0-pwS7*0.5);
shaped_pulse(shname1,shpw1,two,0.0,0.0);
delay((tauC3-(had2+pw*120/90*2))*0.5-pwS4*0.5-had3*0.5-shpw1*0.5);
}
else
{
zgradpulse(gzlvl3, 1.1*gt3);
delay(had3*0.5-shpw1*0.5-1.1*gt3);
shaped_pulse(shname1,shpw1,two,0.0,0.0);
delay(epsilon/4.0-pwS7*0.5-had3*0.5-shpw1*0.5);
c_simshapedpulse(shname2,80.0,150.0,0.0,0.0,zero,zero,zero, 2.0e-6, 2.0e-6);
delay((tauC3-(had2+pw*120/90*2))*0.5-pwS4*0.5-epsilon/4.0-pwS7*0.5);
}
c_shapedpulse("isnob5",80.0,0.0,two, 2.0e-6, 2.0e-6);
zgradpulse(gzlvl3, 1.1*gt3);
delay((tauC3-(had2+pw*120/90*2))*0.5-pwS4*0.5-1.1*gt3);
}
if (fil_flg1[0] == 'c')
{
/* JCOCA & JCOCB is turned off*/
zgradpulse(gzlvl3, gt3);
delay(had2*0.5-pwS4*0.5-gt3);
c_simshapedpulse("isnob5",80.0,0.0,pw*2.0,0.0,zero,zero,zero, 2.0e-6, 2.0e-6);
zgradpulse(gzlvl3, gt3);
delay(had2*0.5-pwS4*0.5-gt3);
rgpulse(pw*flip_angle/90.0, t1, 0.0, 0.0);
if (flip_angle < 90.0) delay(pw*(1-flip_angle/90.0));
zgradpulse(gzlvl3, 1.1*gt3);
delay(had3*0.5-shpw1*0.5-1.1*gt3);
shaped_pulse(shname1,shpw1,two,0.0,0.0);
delay((tauC3-(had2+pw*120.0/90.0*2.0))*0.5-pwS4*0.5-had3*0.5-shpw1*0.5);
c_shapedpulse("isnob5",80.0,0.0,two, 2.0e-6, 2.0e-6);
zgradpulse(gzlvl3, 1.1*gt3);
delay((tauC3-(had2+pw*120.0/90.0*2.0))*0.5-pwS4*0.5-1.1*gt3);
}
/*********************************** 2nd transfer CB->CA +DEPT CAH ***********/
decrgpulse(pwC, zero, 0.0, 0.0);
c13pulse("co", "ca", "sinc", 180.0, zero, 0.0, 0.0);
delay(tauC1-pwS3-pwS4*0.5);
c_shapedpulse("reburp",80.0,0.0,zero, 2.0e-6, 2.0e-6);
delay(tauC1-tauC2-pwS3-pwS4*0.5);
c13pulse("co", "ca", "sinc", 180.0, zero, 0.0, 0.0);
delay(tauC2-pw*8.0-had1);
shaped_pulse(shname1,shpw1,two,0.0,0.0);
delay(had1);
c13pulse("cab", "co", "square", 90.0, zero, 0.0, 0.0);
/******************************************************************************/
if(dm3[B] == 'y') /*optional 2H decoupling off */
{dec3rgpulse(1/dmf3, three, 0.0, 0.0); dec3blank();
setstatus(DEC3ch, FALSE, 'w', FALSE, dmf3); dec3blank();}
zgradpulse(gzlvl3, gt3);
delay(2.0e-4);
h1decon("DIPSI2", 27.0, 0.0);/*POWER_DELAY+PWRF_DELAY+PRG_START_DELAY */
c13pulse("co", "ca", "sinc", 90.0, t5, 2.0e-6, 0.0); /* point e */
decphase(zero);
delay(eta - 2.0*POWER_DELAY - 2.0*PWRF_DELAY);
/* 2*POWER_DELAY+2*PWRF_DELAY */
c13pulse("ca", "co", "square", 180.0, zero, 2.0e-6, 0.0); /* pwS2 */
dec2phase(zero);
delay(theta - eta - pwS2 - WFG3_START_DELAY);
/* WFG3_START_DELAY */
sim3_c13pulse("", "co", "ca", "sinc", "", 0.0, 180.0, 2.0*pwN,
zero, zero, zero, 2.0e-6, 2.0e-6);
initval(phi7cal, v7);
decstepsize(1.0);
dcplrphase(v7); /* SAPS_DELAY */
dec2phase(t8);
delay(theta - SAPS_DELAY);
if (SE_flg[0]=='y') /* point f */
{
nh_evol_se_train("co", "ca"); /* common part of sequence in bionmr.h */
if (dm3[B]=='y') lk_sample();
}
else
{
nh_evol_train("co", "ca"); /* common part of sequence in bionmr.h */
if (dm3[B]=='y') lk_sample();
}
}
pulsesequence()
{
/* DECLARE VARIABLES */
char fsat[MAXSTR],
fscuba[MAXSTR],
f1180[MAXSTR], /* Flag to start t1 @ halfdwell */
f2180[MAXSTR], /* Flag to start t2 @ halfdwell */
C_flg[MAXSTR],
dtt_flg[MAXSTR];
int phase, phase2, ni, ni2,
t1_counter, /* used for states tppi in t1 */
t2_counter; /* used for states tppi in t2 */
double tau1, /* t1 delay */
tau2, /* t2 delay */
taua, /* ~ 1/4JHC = 1.6 ms */
taub, /* 1/6JCH = 1.1 ms */
BigTC, /* Carbon constant time period = 1/4Jcc = 7.0 ms */
BigTC1, /* Carbon constant time period2 < 1/4Jcc to account for relaxation */
pwN, /* PW90 for 15N pulse @ pwNlvl */
pwC, /* PW90 for c nucleus @ pwClvl */
pwcrb180, /* PW180 for C 180 reburp @ rfrb */
pwClvl, /* power level for 13C pulses on dec1 */
compC, compH, /* compression factors for H1 and C13 amps */
rfrb, /* power level for 13C reburp pulse */
pwNlvl, /* high dec2 pwr for 15N hard pulses */
sw1, /* sweep width in f1 */
sw2, /* sweep width in f2 */
tofps, /* tof for presat */
gt0,
gt1,
gt2,
gt3,
gt4,
gstab,
gzlvl0,
gzlvl1,
gzlvl2,
gzlvl3,
gzlvl4,
decstep1,
bw, ofs, ppm,
pwd1,
dpwr3_D,
pwd,
tpwrs,
pwHs,
dof_me,
tof_dtt,
tpwrs1,
pwHs1,
dpwrsed,
pwsed,
dressed,
rfrb_cg,
pwrb_cg;
/* LOAD VARIABLES */
getstr("fsat",fsat);
getstr("f1180",f1180);
getstr("f2180",f2180);
getstr("fscuba",fscuba);
getstr("C_flg",C_flg);
getstr("dtt_flg",dtt_flg);
tofps = getval("tofps");
taua = getval("taua");
taub = getval("taub");
BigTC = getval("BigTC");
BigTC1 = getval("BigTC1");
pwC = getval("pwC");
pwcrb180 = getval("pwcrb180");
pwN = getval("pwN");
tpwr = getval("tpwr");
pwClvl = getval("pwClvl");
compC = getval("compC");
compH = getval("compH");
dpwr = getval("dpwr");
pwNlvl = getval("pwNlvl");
phase = (int) ( getval("phase") + 0.5);
phase2 = (int) ( getval("phase2") + 0.5);
sw1 = getval("sw1");
sw2 = getval("sw2");
ni = getval("ni");
ni2 = getval("ni2");
gt0 = getval("gt0");
gt1 = getval("gt1");
gt2 = getval("gt2");
gt3 = getval("gt3");
gt4 = getval("gt4");
gstab = getval("gstab");
gzlvl0 = getval("gzlvl0");
gzlvl1 = getval("gzlvl1");
gzlvl2 = getval("gzlvl2");
gzlvl3 = getval("gzlvl3");
gzlvl4 = getval("gzlvl4");
decstep1 = getval("decstep1");
pwd1 = getval("pwd1");
dpwr3_D = getval("dpwr3_D");
pwd = getval("pwd");
pwHs = getval("pwHs");
dof_me = getval("dof_me");
pwHs1 = pwHs;
tpwrs=-16.0; tpwrs1=tpwrs;
tof_dtt = getval("tof_dtt");
dpwrsed = -16;
pwsed = 1000.0;
dressed = 90.0;
pwrb_cg = 0.0;
setautocal(); /* activate auto-calibration */
if(FIRST_FID) /* make shapes */
{
ppm = getval("dfrq");
bw = 80.0*ppm;
rb180 = pbox_make("rb180P", "reburp", bw, 0.0, compC*pwC, pwClvl);
bw = 8.125*ppm; ofs = -24.0*ppm;
rb180_cg = pbox_make("rb180_cgP", "reburp", bw, ofs, compC*pwC, pwClvl);
bw = 20.0*ppm; ofs = 136.0*ppm;
cosed = pbox("COsedP", CODEC, CODECps, dfrq, compC*pwC, pwClvl);
if(taua < (gt4+106e-6+pwHs)) printf("gt4 or pwHs may be too long! ");
if(taub < rb180_cg.pw) printf("rb180_cgP pulse may be too long! ");
}
pwcrb180 = rb180.pw; rfrb = rb180.pwrf; /* set up parameters */
pwrb_cg = rb180_cg.pw; rfrb_cg = rb180_cg.pwrf; /* set up parameters */
tpwrs = tpwr - 20.0*log10(pwHs/((compH*pw)*1.69)); /* sinc=1.69xrect */
tpwrs = (int) (tpwrs); tpwrs1=tpwrs;
dpwrsed = cosed.pwr; pwsed = 1.0/cosed.dmf; dressed = cosed.dres;
/* LOAD PHASE TABLE */
settable(t1,2,phi1);
settable(t2,4,phi2);
settable(t3,4,phi3);
settable(t4,4,phi4);
settable(t5,8,phi5);
settable(t6,8,phi6);
settable(t7,8,phi7);
settable(t8,1,phi8);
settable(t9,2,rec);
/* CHECK VALIDITY OF PARAMETER RANGES */
if( BigTC - 0.5*(ni2-1)*1/(sw2) - WFG_STOP_DELAY - POWER_DELAY
- 4.0e-6
< 0.2e-6 )
{
printf(" ni2 is too big\n");
psg_abort(1);
}
if((dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y' ))
{
printf("incorrect dec1 decoupler flags! ");
psg_abort(1);
}
if((dm2[A] == 'y' || dm2[B] == 'y' || dm2[C] == 'y' || dm2[D] == 'y'))
{
printf("incorrect dec2 decoupler flags! Should be 'nnnn' ");
psg_abort(1);
}
if( satpwr > 6 )
{
printf("SATPWR too large !!! ");
psg_abort(1);
}
if( dpwr > 48 )
{
printf("don't fry the probe, DPWR too large! ");
psg_abort(1);
}
if( dpwr2 > -16 )
{
printf("don't fry the probe, DPWR2 too large! ");
psg_abort(1);
}
if( pw > 200.0e-6 )
{
printf("dont fry the probe, pw too high ! ");
psg_abort(1);
}
if( pwN > 200.0e-6 )
{
printf("dont fry the probe, pwN too high ! ");
psg_abort(1);
}
if( pwC > 200.0e-6 )
{
printf("dont fry the probe, pwC too high ! ");
psg_abort(1);
}
if( pwcrb180 > 500.0e-6 )
{
printf("dont fry the probe, pwcrb180 too high ! ");
psg_abort(1);
}
if(dpwr3 > 51)
{
printf("dpwr3 is too high; < 52\n");
psg_abort(1);
}
if(dpwr3_D > 49)
{
printf("dpwr3_D is too high; < 50\n");
psg_abort(1);
}
if(d1 < 1)
{
printf("d1 must be > 1\n");
psg_abort(1);
}
if(dpwrsed > 48)
{
printf("dpwrsed must be less than 49\n");
psg_abort(1);
}
if( gt0 > 5.0e-3 || gt1 > 5.0e-3 || gt2 > 5.0e-3 ||
gt3 > 5.0e-3 || gt4 > 5.0e-3 )
{ printf(" all values of gti must be < 5.0e-3\n");
psg_abort(1);
}
if(ix==1) {
printf("make sure that BigTC1 is set properly for your application\n");
printf("7 ms, neglecting relaxation \n");
}
/* Phase incrementation for hypercomplex 2D data */
if (phase == 2) {
tsadd(t1,1,4);
tsadd(t2,1,4);
tsadd(t3,1,4);
tsadd(t4,1,4);
}
if (phase2 == 2)
tsadd(t8,1,4);
/* Set up f1180 tau1 = t1 */
tau1 = d2;
tau1 = tau1 - 2.0*pw - 4.0/PI*pwC - POWER_DELAY - 2.0e-6 - PRG_START_DELAY
- PRG_STOP_DELAY - POWER_DELAY - 2.0e-6;
if(f1180[A] == 'y') {
tau1 += ( 1.0 / (2.0*sw1) );
if(tau1 < 0.4e-6) tau1 = 4.0e-7;
}
tau1 = tau1/2.0;
/* Set up f2180 tau2 = t2 */
tau2 = d3;
if(f2180[A] == 'y') {
tau2 += ( 1.0 / (2.0*sw2) );
if(tau2 < 0.4e-6) tau2 = 4.0e-7;
}
tau2 = tau2/2.0;
/* Calculate modifications to phases for States-TPPI acquisition */
if( ix == 1) d2_init = d2 ;
t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
if(t1_counter % 2) {
tsadd(t1,2,4);
tsadd(t9,2,4);
}
if( ix == 1) d3_init = d3 ;
t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
if(t2_counter % 2) {
tsadd(t8,2,4);
tsadd(t9,2,4);
}
/* BEGIN ACTUAL PULSE SEQUENCE */
status(A);
obspower(satpwr); /* Set transmitter power for 1H presaturation */
decpower(pwClvl); /* Set Dec1 power for hard 13C pulses */
dec2power(pwNlvl); /* Set Dec2 to low power */
/* Presaturation Period */
status(B);
if (fsat[0] == 'y')
{
obsoffset(tofps);
delay(2.0e-5);
rgpulse(d1,zero,2.0e-6,2.0e-6); /* presat with transmitter */
obspower(tpwr); /* Set transmitter power for hard 1H pulses */
delay(2.0e-5);
if(fscuba[0] == 'y')
{
delay(2.2e-2);
rgpulse(pw,zero,2.0e-6,0.0);
rgpulse(2.0*pw,one,2.0e-6,0.0);
rgpulse(pw,zero,2.0e-6,0.0);
delay(2.2e-2);
}
}
else
{
delay(d1);
}
obspower(tpwr); /* Set transmitter power for hard 1H pulses */
obsoffset(tof);
txphase(t1);
decphase(zero);
dec2phase(zero);
delay(1.0e-5);
/* Begin Pulses */
status(C);
decoffset(dof_me);
lk_hold();
rcvroff();
delay(20.0e-6);
/* ensure that magnetization originates on 1H and not 13C */
if(dtt_flg[A] == 'y') {
obsoffset(tof_dtt);
obspower(tpwrs1);
shaped_pulse("H2Osinc",pwHs1,zero,10.0e-6,0.0);
obspower(tpwr);
obsoffset(tof);
}
decrgpulse(pwC,zero,0.0,0.0);
zgradpulse(gzlvl0,gt0);
delay(gstab);
rgpulse(pw,zero,0.0,0.0); /* 90 deg 1H pulse */
zgradpulse(gzlvl1,gt1);
delay(gstab);
delay(taua - gt1 -gstab);
simpulse(2.0*pw,2.0*pwC,zero,zero,0.0,0.0);
txphase(one);
delay(taua - gt1 - gstab);
zgradpulse(gzlvl1,gt1);
delay(gstab);
rgpulse(pw,one,0.0,0.0);
/* shaped_pulse */
obspower(tpwrs);
shaped_pulse("H2Osinc",pwHs,zero,2.0e-6,0.0);
obspower(tpwr);
/* shaped_pulse */
decoffset(dof); /* jump 13C to 40 ppm */
zgradpulse(gzlvl2,gt2);
delay(gstab);
decrgpulse(pwC,t1,4.0e-6,0.0); decphase(zero);
initval(1.0,v3);
decstepsize(decstep1);
dcplrphase(v3);
decpwrf(rfrb);
delay(BigTC - POWER_DELAY - WFG_START_DELAY);
decshaped_pulse(rb180.name,pwcrb180,zero,0.0,0.0);
dcplrphase(zero);
decphase(t2);
decpwrf(4095.0);
delay(BigTC - WFG_STOP_DELAY - POWER_DELAY);
decrgpulse(pwC,t2,0.0,0.0);
decphase(zero);
/* turn on 2H decoupling */
dec3phase(one);
dec3power(dpwr3);
dec3rgpulse(pwd1,one,4.0e-6,0.0);
dec3phase(zero);
dec3unblank();
dec3power(dpwr3_D);
dec3prgon(dseq3,pwd,dres3);
dec3on();
/* turn on 2H decoupling */
initval(1.0,v3);
decstepsize(decstep1);
dcplrphase(v3);
decpwrf(rfrb);
delay(BigTC1 - POWER_DELAY - 4.0e-6 - pwd1
- POWER_DELAY - PRG_START_DELAY - POWER_DELAY - WFG_START_DELAY);
decshaped_pulse(rb180.name,pwcrb180,zero,0.0,0.0);
dcplrphase(zero);
decphase(t3);
decpwrf(4095.0);
delay(BigTC1 - WFG_STOP_DELAY - POWER_DELAY);
decrgpulse(pwC,t3,0.0,0.0);
decpwrf(rfrb_cg); decphase(zero);
if(taub > pwrb_cg)
delay(taub/2.0 - pwrb_cg/2.0 - POWER_DELAY - WFG_START_DELAY);
decshaped_pulse(rb180_cg.name,pwrb_cg,zero,0.0,0.0);
decpwrf(rfrb);
if(taub > pwrb_cg)
delay(taub/2.0 - pwrb_cg/2.0 - WFG_STOP_DELAY - POWER_DELAY - SAPS_DELAY
- 2.0e-6 - WFG_START_DELAY);
initval(1.0,v3);
decstepsize(decstep1);
dcplrphase(v3);
decshaped_pulse(rb180.name,pwcrb180,zero,2.0e-6,0.0);
dcplrphase(zero);
decpwrf(rfrb_cg); decphase(zero);
if(taub > pwrb_cg)
delay(taub/2.0 - pwrb_cg/2.0 - WFG_STOP_DELAY - SAPS_DELAY
- POWER_DELAY - WFG_START_DELAY);
decshaped_pulse(rb180_cg.name,pwrb_cg,zero,0.0,0.0);
decpwrf(4095.0); decphase(t4);
if(taub > pwrb_cg)
delay(taub/2.0 - pwrb_cg/2.0 - WFG_STOP_DELAY - POWER_DELAY);
decrgpulse(pwC,t4,0.0,0.0);
if(C_flg[A] == 'n') {
decpower(dpwrsed); decunblank(); decphase(zero); delay(2.0e-6);
decprgon(cosed.name,pwsed,dressed);
decon();
delay(tau1);
rgpulse(2.0*pw,zero,0.0,0.0);
delay(tau1);
decoff();
decprgoff();
decblank();
decpower(pwClvl);
}
else
simpulse(2.0*pw,2.0*pwC,zero,zero,4.0e-6,4.0e-6);
decrgpulse(pwC,t5,2.0e-6,0.0);
decpwrf(rfrb_cg); decphase(zero);
if(taub > pwrb_cg)
delay(taub/2.0 - pwrb_cg/2.0 - POWER_DELAY - WFG_START_DELAY);
decshaped_pulse(rb180_cg.name,pwrb_cg,zero,0.0,0.0);
decpwrf(rfrb);
if(taub > pwrb_cg)
delay(taub/2.0 - pwrb_cg/2.0 - WFG_STOP_DELAY - POWER_DELAY - SAPS_DELAY
- 2.0e-6 - WFG_START_DELAY);
initval(1.0,v3);
decstepsize(decstep1);
dcplrphase(v3);
decshaped_pulse(rb180.name,pwcrb180,zero,2.0e-6,0.0);
dcplrphase(zero);
decpwrf(rfrb_cg); decphase(zero);
if(taub > pwrb_cg)
delay(taub/2.0 - pwrb_cg/2.0 - WFG_STOP_DELAY - SAPS_DELAY
- POWER_DELAY - WFG_START_DELAY);
decshaped_pulse(rb180_cg.name,pwrb_cg,zero,0.0,0.0);
decpwrf(4095.0); decphase(t6);
if(taub > pwrb_cg)
delay(taub/2.0 - pwrb_cg/2.0 - WFG_STOP_DELAY - POWER_DELAY);
decrgpulse(pwC,t6,0.0,0.0);
decphase(zero);
initval(1.0,v3);
decstepsize(decstep1);
dcplrphase(v3);
decpwrf(rfrb);
delay(BigTC1 - POWER_DELAY - WFG_START_DELAY);
decshaped_pulse(rb180.name,pwcrb180,zero,0.0,0.0);
dcplrphase(zero);
decphase(t7);
decpwrf(4095.0);
delay(BigTC1 - WFG_STOP_DELAY - POWER_DELAY
- PRG_STOP_DELAY - POWER_DELAY - 4.0e-6 - pwd1);
/* 2H decoupling off */
dec3off();
dec3prgoff();
dec3blank();
dec3power(dpwr3);
dec3rgpulse(pwd1,three,4.0e-6,0.0);
/* 2H decoupling off */
decrgpulse(pwC,t7,0.0,0.0);
decphase(zero);
delay(tau2);
rgpulse(2.0*pw,zero,0.0,0.0);
initval(1.0,v3);
decstepsize(decstep1);
dcplrphase(v3);
decpwrf(rfrb);
delay(BigTC - 2.0*pw - POWER_DELAY - WFG_START_DELAY);
decshaped_pulse(rb180.name,pwcrb180,zero,0.0,0.0);
dcplrphase(zero);
decphase(t8);
decpwrf(4095.0);
delay(BigTC - tau2 - WFG_STOP_DELAY - POWER_DELAY - 4.0e-6);
decrgpulse(pwC,t8,4.0e-6,0.0);
decoffset(dof_me);
zgradpulse(gzlvl3,gt3);
delay(gstab);
lk_sample();
/* shaped_pulse */
obspower(tpwrs);
shaped_pulse("H2Osinc",pwHs,two,2.0e-6,0.0);
obspower(tpwr);
/* shaped_pulse */
rgpulse(pw,zero,4.0e-6,0.0);
zgradpulse(gzlvl4,gt4);
delay(gstab);
delay(taua - gt4 -gstab
- POWER_DELAY - 2.0e-6 - WFG_START_DELAY
- pwHs - WFG_STOP_DELAY - POWER_DELAY - 2.0e-6);
/* shaped_pulse */
obspower(tpwrs);
shaped_pulse("H2Osinc",pwHs,two,2.0e-6,0.0);
obspower(tpwr);
/* shaped_pulse */
simpulse(2.0*pw,2.0*pwC,zero,zero,2.0e-6,0.0);
/* shaped_pulse */
obspower(tpwrs);
shaped_pulse("H2Osinc",pwHs,two,2.0e-6,0.0);
obspower(tpwr);
/* shaped_pulse */
zgradpulse(gzlvl4,gt4);
delay(gstab);
delay(taua - POWER_DELAY - WFG_START_DELAY
- pwHs - WFG_STOP_DELAY - POWER_DELAY
- gt4 - gstab - 2.0*POWER_DELAY);
decpower(dpwr); /* Set power for decoupling */
dec2power(dpwr2);
/* rcvron(); */ /* Turn on receiver to warm up before acq */
/* BEGIN ACQUISITION */
status(D);
setreceiver(t9);
}
void pulsesequence()
{
/* DECLARE VARIABLES */
char shape_ss[MAXSTR];
int t1_counter;
double
tau1, /* t1/2 */
taua = getval("taua"), /* 2.25ms */
taub = getval("taub"), /* 2.75ms */
time_T1,
pwN, /* PW90 for N-nuc */
pwNlvl, /* power level for N hard pulses */
ncyc = getval("ncyc"),
compH= getval("compH"),
pwHs = getval("pwHs"), /* H1 90 degree pulse length at tpwrs */
tpwrs , /* power for the pwHs ("H2Osinc") pulse */
tpwrsf , /* fine power for the pwHs ("H2Osinc") pulse */
shss_pwr, /* power for cos modulated NH pulses */
pw_shpss=getval("pw_shpss"),
waterdly, /* pw for water pulse */
waterpwrf, /* fine power for water pulse */
waterpwr, /* power for water pulse */
gt0,
gt1 = getval("gt1"),
gt2 = getval("gt2"),
gt3 = getval("gt3"),
gt4 = getval("gt4"),
gt5 = getval("gt5"),
gt6 = getval("gt6"),
gzlvl0 = getval("gzlvl0"),
gzlvl1 = getval("gzlvl1"),
gzlvl2 = getval("gzlvl2"),
gzlvl3 = getval("gzlvl3"),
gzlvl4 = getval("gzlvl4"),
gzlvl5 = getval("gzlvl5"),
gzlvl6 = getval("gzlvl6");
/* LOAD VARIABLES */
pwN = getval("pwN");
pwNlvl = getval("pwNlvl");
tpwrsf = getval("tpwrsf");
waterpwrf = getval("waterpwrf");
waterdly = getval("waterdly");
getstr("shape_ss",shape_ss);
time_T1=ncyc*(2.0*2.5e-3+pw_shpss);
if (ix==1) printf(" ncyc= %f, time_T1= %f \n", ncyc,time_T1);
/* selective H20 one-lobe sinc pulse */
tpwrs = tpwr - 20.0*log10(pwHs/(compH*pw*1.69)); /* needs 1.69 times more */
tpwrs = (int) (tpwrs); /* power than a square pulse */
/* selective H20 watergate pulse */
waterpwr = tpwr - 20.0*log10(waterdly/(compH*pw));
waterpwr = (int) (waterpwr);
/* selective cos modulated NH 180 degree pulse */
shss_pwr = tpwr - 20.0*log10(pw_shpss/((compH*2*pw)*2)); /* needs 2 times more */
shss_pwr = (int) (shss_pwr); /* power than a square pulse */
/* check validity of parameter range */
if((dm[A] == 'y' || dm[B] == 'y' ))
{
printf("incorrect Dec1 decoupler flags! ");
psg_abort(1);
}
if (dm2[A] == 'y' || dm2[B] == 'y' || dm2[C] == 'y')
{
printf("incorrect Dec2 decoupler flag! dm2 should be 'nnn' ");
psg_abort(1);
}
if (dmm2[A] == 'g' || dmm2[B] == 'g' || dmm2[C] == 'g')
{
printf("incorrect Dec2 decoupler flag! dmm2 should be 'ccc' ");
psg_abort(1);
}
if( dpwr > 50 )
{
printf("don't fry the probe, dpwr too large! ");
psg_abort(1);
}
if( dpwr2 > 50 )
{
printf("don't fry the probe, dpwr2 too large! ");
psg_abort(1);
}
if(gt1 > 15.0e-3 || gt2 > 15.0e-3 || gt3 > 15.0e-3 || gt4 > 15.0e-3)
{
printf("gti must be less than 15 ms \n");
psg_abort(1);
}
/* LOAD VARIABLES */
settable(t1, 8, phi1);
settable(t2, 4, phi2);
settable(t3, 1, phi3);
settable(t10, 8, phi10);
settable(t14, 8, rec);
/* Phase incrementation for hypercomplex data */
if ( phase1 == 2 ) /* Hypercomplex in t1 */
{ ttadd(t14,t10,4);
tsadd(t3,2,4);
}
/* calculate modification to phases based on current t1 values
to achieve States-TPPI acquisition */
if(ix == 1)
d2_init = d2;
t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5);
tau1=0.5*d2;
if(t1_counter %2) {
tsadd(t2,2,4);
tsadd(t14,2,4);
}
/* BEGIN ACTUAL PULSE SEQUENCE */
status(A);
obspower(tpwr); /* Set power for pulses */
dec2power(pwNlvl); /* Set decoupler2 power to pwNlvl */
initval(ncyc+0.1,v10); /* for DIPSI-2 */
delay(d1);
status(B);
rcvroff();
/*destroy N15 magnetization*/
dec2rgpulse(pwN, zero, 0.0, 0.0);
zgradpulse(gzlvl1, gt1);
delay(9.0e-5);
/* 1H-15N INEPT */
rgpulse(pw,zero,1.0e-6,0.0);
txphase(zero); dec2phase(zero);
zgradpulse(gzlvl2,gt2);
delay(taua -pwN-0.5*pw -gt2 ); /* delay=1/4J(NH) */
sim3pulse(2.0*pw,0.0e-6,2*pwN,zero,zero,zero,0.0,0.0);
txphase(one); dec2phase(t1);
zgradpulse(gzlvl2,gt2);
delay(taua -1.5*pwN -gt2); /* delay=1/4J(NH) */
sim3pulse(pw,0.0e-6,pwN,one,zero,t1,0.0,0.0);
if (tpwrsf < 4095.0)
{obspwrf(tpwrsf); tpwrs=tpwrs+6.0;}
obspower(tpwrs);
shaped_pulse("H2Osinc", pwHs, two, 2.0e-6, 0.0);
obspower(tpwr); obspwrf(4095.0); tpwrs=tpwrs-6.0;
txphase(zero); dec2phase(zero);
zgradpulse(gzlvl3,gt3);
delay(taub -1.5*pwN -gt3 -pwHs-2.0e-6-2.0*POWER_DELAY-WFG_START_DELAY); /* delay=1/4J(NH) */
sim3pulse(2.0*pw,0.0e-6,2*pwN,zero,zero,zero,0.0,0.0);
dec2phase(one);
zgradpulse(gzlvl3,gt3);
delay(taub -1.5*pwN -gt3 ); /* delay=1/4J(NH) */
dec2phase(one);
dec2rgpulse(pwN,one,0.0,0.0);
/* relaxation recovery */
if (ncyc>0.6)
{
obspower(shss_pwr);
starthardloop(v10);
delay(2.5e-3);
shaped_pulse(shape_ss,pw_shpss,zero,0.0,0.0);
delay(2.5e-3);
endhardloop();
obspower(tpwr);
}
zgradpulse(gzlvl6,gt6);
delay(200.0e-6);
dec2rgpulse(pwN,t2,0.0,0.0);
txphase(t3); dec2phase(zero);
/* evolution of t1 */
if(d2>0.001)
{
zgradpulse( gzlvl0,(d2/2.0-0.0003-2.0*GRADIENT_DELAY));
delay(300.0e-6);
zgradpulse(-gzlvl0,(d2/2.0-0.0003-2.0*GRADIENT_DELAY));
delay(300.0e-6);
}
else
delay(d2);
/* ST2 */
rgpulse(pw,t3,0.0,0.0);
txphase(t3);
if (waterpwrf < 4095.0)
{obspwrf(waterpwrf); waterpwr=waterpwr+6.0;}
obspower(waterpwr);
rgpulse(waterdly,t3,0.0,rof1);
if (waterpwrf < 4095.0)
{obspwrf(4095.0); waterpwr=waterpwr-6.0;}
obspower(tpwr);
txphase(zero);
zgradpulse(gzlvl4,gt4);
delay(taua -pwN -0.5*pw -gt4-waterdly-rof1);
sim3pulse(2.0*pw,0.0e-6,2*pwN,zero,zero,zero,0.0,0.0);
dec2phase(t3);
zgradpulse(gzlvl4,gt4);
delay(taua -1.5*pwN -gt4 -waterdly-rof1); /* delay=1/4J(NH) */
if (waterpwrf < 4095.0)
{obspwrf(waterpwrf); waterpwr=waterpwr+6.0;}
obspower(waterpwr);
txphase(two);
rgpulse(waterdly,two,rof1,0.0);
if (waterpwrf < 4095.0)
{obspwrf(4095.0); waterpwr=waterpwr-6.0;}
obspower(tpwr);
sim3pulse(pw,0.0e-6,pwN,zero,zero,t3,0.0,0.0);
/* watergate */
zgradpulse(gzlvl5,gt5);
delay(taua-1.5*pwN-waterdly-gt5);
txphase(two);
if (waterpwrf < 4095.0)
{obspwrf(waterpwrf); waterpwr=waterpwr+6.0;}
obspower(waterpwr);
dec2phase(zero);
rgpulse(waterdly,two,0.0,rof1);
if (waterpwrf < 4095.0)
{obspwrf(4095.0); waterpwr=waterpwr-6.0;}
obspower(tpwr);
txphase(zero);
sim3pulse(2.0*pw,0.0e-6,2*pwN,zero,zero,zero,0.0,0.0);
if (waterpwrf < 4095.0)
{obspwrf(waterpwrf); waterpwr=waterpwr+6.0;}
obspower(waterpwr);
txphase(two);
rgpulse(waterdly,two,rof1,0.0);
if (waterpwrf < 4095.0)
{obspwrf(4095.0); waterpwr=waterpwr-6.0;}
zgradpulse(gzlvl5,gt5);
obspwrf(4095.0); obspower(tpwr);
delay(taua-1.5*pwN-waterdly-gt5);
dec2rgpulse(pwN,zero,0.0,0.0);
/* acquire data */
status(C);
setreceiver(t14);
}
pulsesequence()
{
/* DECLARE AND LOAD VARIABLES */
char f1180[MAXSTR], /* Flag to start t1 @ halfdwell */
f2180[MAXSTR], /* Flag to start t2 @ halfdwell */
rna_stCdec[MAXSTR], /* calls STUD+ waveforms from shapelib */
STUD[MAXSTR]; /* apply automatically calculated STUD decoupling */
int icosel1, /* used to get n and p type */
icosel2,
t1_counter, /* used for states tppi in t1 */
t2_counter, /* used for states tppi in t2 */
ni2 = getval("ni2");
double tau1, /* t1 delay */
tau2, /* t2 delay */
del = getval("del"), /* time delays for CH coupling evolution */
del1 = getval("del1"),
del2 = getval("del2"),
/* STUD+ waveforms automatically calculated by macro "rnacal" */
/* and string parameter rna_stCdec calls them from your shapelib.*/
stdmf, /* dmf for STUD decoupling */
studlvl, /* coarse power for STUD+ decoupling */
rf80 = getval("rf80"), /* rf in Hz for 80ppm STUD+ */
pwClvl = getval("pwClvl"), /* coarse power for C13 pulse */
pwC = getval("pwC"), /* C13 90 degree pulse length at pwClvl */
rfC, /* maximum fine power when using pwC pulses */
dofa, /* dof shifted to 80 ppm for ribose */
/* p_d is used to calculate the isotropic mixing on the Cab region */
p_d, /* 50 degree pulse for DIPSI-3 at rfd */
rfd, /* fine power for 35 ppm */
ncyc = getval("ncyc"), /* no. of cycles of DIPSI-3 */
compC = getval("compC"), /* adjustment for C13 amplifier compression */
pwNlvl = getval("pwNlvl"), /* power for N15 pulses */
pwN = getval("pwN"), /* N15 90 degree pulse length at pwNlvl */
sw1 = getval("sw1"),
sw2 = getval("sw2"),
grecov = getval("grecov"), /* Gradient recovery delay, typically 150-200us */
gt1 = getval("gt1"), /* coherence pathway gradients */
gzlvl1 = getval("gzlvl1"),
gzlvl2 = getval("gzlvl2"),
gt3 = getval("gt3"), /* other gradients */
gt5 = getval("gt5"),
gzlvl3 = getval("gzlvl3"),
gzlvl4 = getval("gzlvl4"),
gzlvl5 = getval("gzlvl5"),
gzlvl6 = getval("gzlvl6");
getstr("STUD",STUD);
getstr("f1180",f1180);
getstr("f2180",f2180);
/* LOAD PHASE TABLE */
settable(t3,2,phi3);
settable(t6,1,phi6);
settable(t5,4,phi5);
settable(t10,1,phi10);
settable(t11,4,rec);
/* INITIALIZE VARIABLES */
if( dpwrf < 4095 )
{ text_error("reset dpwrf=4095 and recalibrate C13 90 degree pulse");
psg_abort(1); }
/* maximum fine power for pwC pulses */
rfC = 4095.0;
/* Center dof in RIBOSE region on 80 ppm. */
dofa = dof - 30.0*dfrq;
/* dipsi-3 decoupling C-ribose */
p_d = (5.0)/(9.0*4.0*7000.0*(sfrq/800.0)); /* DIPSI-3 covers 35 ppm */
rfd = (compC*4095.0*pwC*5.0)/(p_d*9.0);
rfd = (int) (rfd + 0.5);
ncyc = (int) (ncyc + 0.5);
/* 80 ppm STUD+ decoupling */
strcpy(rna_stCdec, "wurst80");
stdmf = getval("dmf80");
studlvl = pwClvl + 20.0*log10(compC*pwC*4.0*rf80);
studlvl = (int) (studlvl + 0.5);
/* CHECK VALIDITY OF PARAMETER RANGES */
if( gt1 > 0.5*del - 0.5*grecov )
{ text_error(" gt1 is too big. Make gt1 less than %f.\n", (0.5*del - 0.5*grecov)); psg_abort(1);}
if((dm3[A] == 'y' || dm3[C] == 'y' ))
{ text_error("incorrect dec1 decoupler flags! Should be 'nyn' or 'nnn' "); psg_abort(1); }
if((dm2[A] == 'y' || dm2[B] == 'y'))
{ text_error("incorrect dec2 decoupler flags! Should be 'nnn' or 'nny' "); psg_abort(1); }
if((dm[A] == 'y' || dm[B] == 'y'))
{ text_error("incorrect dec1 decoupler flags! Should be 'nny' "); psg_abort(1); }
if( (((dm[C] == 'y') && (dm2[C] == 'y')) && (STUD[A] == 'y')) )
{ text_error("incorrect dec2 decoupler flags! Should be 'nnn' if STUD='y'"); psg_abort(1); }
if( dpwr > 50 )
{ text_error("don't fry the probe, DPWR too large! "); psg_abort(1); }
if( dpwr2 > 50 )
{ text_error("don't fry the probe, DPWR2 too large! "); psg_abort(1); }
if( (pw > 20.0e-6) && (tpwr > 56) )
{ text_error("don't fry the probe, pw too high ! "); psg_abort(1); }
if( (pwC > 40.0e-6) && (pwClvl > 56) )
{ text_error("don't fry the probe, pwN too high ! "); psg_abort(1); }
if( (pwN > 100.0e-6) && (pwNlvl > 56) )
{ text_error("don't fry the probe, pwN too high ! "); psg_abort(1); }
if ((dm3[B] == 'y' && dpwr3 > 44 ))
{ text_error ("Deuterium decoupling power too high ! "); psg_abort(1); }
if ((ncyc > 1 ) && (ix == 1))
{ text_error("mixing time is %f ms.\n",(ncyc*97.8*4*p_d)); }
/* PHASES AND INCREMENTED TIMES */
/* Phase incrementation for hypercomplex 2D data, States-Haberkorn element */
icosel1 = -1; icosel2 = -1;
if (phase1 == 2)
{ tsadd(t6,2,4); icosel1 = -1*icosel1; }
if (phase2 == 2)
{ tsadd(t10,2,4); icosel2 = -1*icosel2; tsadd(t6,2,4); }
/* Set up f1180 */
tau1 = d2;
if((f1180[A] == 'y') && (ni > 1.0))
{ tau1 += ( 1.0 / (2.0*sw1) ); if(tau1 < 0.2e-6) tau1 = 0.0; }
tau1 = tau1/2.0;
/* Set up f2180 */
tau2 = d3;
if((f2180[A] == 'y') && (ni2 > 1.0))
{ tau2 += ( 1.0 / (2.0*sw2) ); if(tau2 < 0.2e-6) tau2 = 0.0; }
tau2 = tau2/2.0;
/* Calculate modifications to phases for States-TPPI acquisition */
if( ix == 1) d2_init = d2;
t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
if(t1_counter % 2)
{ tsadd(t3,2,4); tsadd(t11,2,4); }
if( ix == 1) d3_init = d3;
t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
if(t2_counter % 2)
{ tsadd(t5,2,4); tsadd(t11,2,4); }
/* BEGIN PULSE SEQUENCE */
status(A);
if (dm3[B]=='y') lk_sample();
delay(d1);
if (dm3[B]=='y') lk_hold();
rcvroff();
obspower(tpwr);
decpower(pwClvl);
dec2power(pwNlvl);
decpwrf(rfC);
obsoffset(tof);
decoffset(dofa);
dec2offset(dof2);
txphase(t3);
delay(1.0e-5);
decrgpulse(pwC, zero, 0.0, 0.0); /*destroy C13 magnetization*/
zgradpulse(gzlvl1, 0.5e-3);
delay(grecov/2);
decrgpulse(pwC, one, 0.0, 0.0);
zgradpulse(0.7*gzlvl1, 0.5e-3);
delay(5.0e-4);
if(dm3[B] == 'y') /*optional 2H decoupling on */
{
dec3unblank();
dec3rgpulse(1/dmf3, one, 0.0, 0.0);
dec3unblank();
setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
}
rgpulse(pw, t3, 0.0, 0.0); /* 1H pulse excitation */
decphase(zero);
delay(0.5*del + tau1 - 2.0*pwC);
decrgpulse(2.0*pwC, zero, 0.0, 0.0);
txphase(zero);
delay(tau1);
rgpulse(2.0*pw, zero, 0.0, 0.0);
zgradpulse(icosel1*gzlvl1, 0.1*gt1);
decphase(t5);
delay(0.5*del - 0.1*gt1);
simpulse(pw, pwC, zero, t5, 0.0, 0.0);
zgradpulse(gzlvl3, gt3);
decphase(zero);
delay(0.5*del2 - gt3);
simpulse(2.0*pw, 2.0*pwC, zero, zero, 0.0, 0.0);
zgradpulse(gzlvl3, gt3);
txphase(t6);
decphase(one);
delay(0.5*del2 - gt3);
simpulse(pw, pwC, t6, one, 0.0, 0.0);
zgradpulse(gzlvl4, gt3);
txphase(zero);
decphase(zero);
delay(0.5*del1 - gt3);
simpulse(2.0*pw, 2.0*pwC, zero, zero, 0.0, 0.0);
zgradpulse(gzlvl4, gt3);
delay(0.5*del1 - gt3);
decrgpulse(pwC, zero, 0.0, 0.0);
decpwrf(rfd);
delay(2.0e-6);
initval(ncyc, v2);
starthardloop(v2);
decrgpulse(4.9*p_d,zero,0.0,0.0);
decrgpulse(7.9*p_d,two,0.0,0.0);
decrgpulse(5.0*p_d,zero,0.0,0.0);
decrgpulse(5.5*p_d,two,0.0,0.0);
decrgpulse(0.6*p_d,zero,0.0,0.0);
decrgpulse(4.6*p_d,two,0.0,0.0);
decrgpulse(7.2*p_d,zero,0.0,0.0);
decrgpulse(4.9*p_d,two,0.0,0.0);
decrgpulse(7.4*p_d,zero,0.0,0.0);
decrgpulse(6.8*p_d,two,0.0,0.0);
decrgpulse(7.0*p_d,zero,0.0,0.0);
decrgpulse(5.2*p_d,two,0.0,0.0);
decrgpulse(5.4*p_d,zero,0.0,0.0);
decrgpulse(0.6*p_d,two,0.0,0.0);
decrgpulse(4.5*p_d,zero,0.0,0.0);
decrgpulse(7.3*p_d,two,0.0,0.0);
decrgpulse(5.1*p_d,zero,0.0,0.0);
decrgpulse(7.9*p_d,two,0.0,0.0);
decrgpulse(4.9*p_d,two,0.0,0.0);
decrgpulse(7.9*p_d,zero,0.0,0.0);
decrgpulse(5.0*p_d,two,0.0,0.0);
decrgpulse(5.5*p_d,zero,0.0,0.0);
decrgpulse(0.6*p_d,two,0.0,0.0);
decrgpulse(4.6*p_d,zero,0.0,0.0);
decrgpulse(7.2*p_d,two,0.0,0.0);
decrgpulse(4.9*p_d,zero,0.0,0.0);
decrgpulse(7.4*p_d,two,0.0,0.0);
decrgpulse(6.8*p_d,zero,0.0,0.0);
decrgpulse(7.0*p_d,two,0.0,0.0);
decrgpulse(5.2*p_d,zero,0.0,0.0);
decrgpulse(5.4*p_d,two,0.0,0.0);
decrgpulse(0.6*p_d,zero,0.0,0.0);
decrgpulse(4.5*p_d,two,0.0,0.0);
decrgpulse(7.3*p_d,zero,0.0,0.0);
decrgpulse(5.1*p_d,two,0.0,0.0);
decrgpulse(7.9*p_d,zero,0.0,0.0);
decrgpulse(4.9*p_d,two,0.0,0.0);
decrgpulse(7.9*p_d,zero,0.0,0.0);
decrgpulse(5.0*p_d,two,0.0,0.0);
decrgpulse(5.5*p_d,zero,0.0,0.0);
decrgpulse(0.6*p_d,two,0.0,0.0);
decrgpulse(4.6*p_d,zero,0.0,0.0);
decrgpulse(7.2*p_d,two,0.0,0.0);
decrgpulse(4.9*p_d,zero,0.0,0.0);
decrgpulse(7.4*p_d,two,0.0,0.0);
decrgpulse(6.8*p_d,zero,0.0,0.0);
decrgpulse(7.0*p_d,two,0.0,0.0);
decrgpulse(5.2*p_d,zero,0.0,0.0);
decrgpulse(5.4*p_d,two,0.0,0.0);
decrgpulse(0.6*p_d,zero,0.0,0.0);
decrgpulse(4.5*p_d,two,0.0,0.0);
decrgpulse(7.3*p_d,zero,0.0,0.0);
decrgpulse(5.1*p_d,two,0.0,0.0);
decrgpulse(7.9*p_d,zero,0.0,0.0);
decrgpulse(4.9*p_d,zero,0.0,0.0);
decrgpulse(7.9*p_d,two,0.0,0.0);
decrgpulse(5.0*p_d,zero,0.0,0.0);
decrgpulse(5.5*p_d,two,0.0,0.0);
decrgpulse(0.6*p_d,zero,0.0,0.0);
decrgpulse(4.6*p_d,two,0.0,0.0);
decrgpulse(7.2*p_d,zero,0.0,0.0);
decrgpulse(4.9*p_d,two,0.0,0.0);
decrgpulse(7.4*p_d,zero,0.0,0.0);
decrgpulse(6.8*p_d,two,0.0,0.0);
decrgpulse(7.0*p_d,zero,0.0,0.0);
decrgpulse(5.2*p_d,two,0.0,0.0);
decrgpulse(5.4*p_d,zero,0.0,0.0);
decrgpulse(0.6*p_d,two,0.0,0.0);
decrgpulse(4.5*p_d,zero,0.0,0.0);
decrgpulse(7.3*p_d,two,0.0,0.0);
decrgpulse(5.1*p_d,zero,0.0,0.0);
decrgpulse(7.9*p_d,two,0.0,0.0);
endhardloop();
dec2phase(zero);
decphase(zero);
txphase(zero);
decpwrf(rfC);
delay(tau2);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
delay(tau2);
decpwrf(rfC);
zgradpulse(-icosel2*gzlvl2, 1.8*gt1);
delay(grecov+2.0e-6);
decrgpulse(2.0*pwC, zero, 0.0, 0.0);
decpwrf(rfC);
zgradpulse(icosel2*gzlvl2, 1.8*gt1);
delay(grecov + pwN);
decrgpulse(pwC, zero, 0.0, 0.0);
decpwrf(rfC);
decrgpulse(pwC, zero, 2.0e-6, 0.0);
zgradpulse(gzlvl5, gt5);
delay(0.5*del1 - gt5);
simpulse(2.0*pw, 2.0*pwC, zero, zero, 0.0, 0.0);
zgradpulse(gzlvl5, gt5);
txphase(one);
decphase(t10);
delay(0.5*del1 - gt5);
simpulse(pw, pwC, one, t10, 0.0, 0.0);
zgradpulse(gzlvl6, gt5);
txphase(zero);
decphase(zero);
delay(0.5*del2 - gt5);
simpulse(2.0*pw, 2.0*pwC, zero, zero, 0.0, 0.0);
zgradpulse(gzlvl6, gt5);
delay(0.5*del2 - gt5);
simpulse(pw, pwC, zero, zero, 0.0, 0.0);
delay(0.5*del - 0.5*pwC);
simpulse(2.0*pw,2.0*pwC, zero, zero, 0.0, 0.0);
if (STUD[A]=='y') decpower(studlvl);
else
{
decpower(dpwr);
dec2power(dpwr2);
}
zgradpulse(gzlvl1, gt1); /* 2.0*GRADIENT_DELAY */
if(dm3[B] == 'y')
delay(0.5*del - gt1 -1/dmf3 - 2.0*GRADIENT_DELAY - POWER_DELAY);
else
delay(0.5*del - gt1 - 2.0*GRADIENT_DELAY - POWER_DELAY);
if(dm3[B] == 'y') /*optional 2H decoupling off */
{
dec3rgpulse(1/dmf3, three, 0.0, 0.0); dec3blank();
setstatus(DEC3ch, FALSE, 'w', FALSE, dmf3);
dec3blank();
}
decpower(dpwr); /* POWER_DELAY */
if (dm3[B]=='y') lk_sample();
if ((STUD[A]=='y') && (dm[C] == 'y'))
{decpower(studlvl);
decunblank();
decon();
decprgon(rna_stCdec,1/stdmf, 1.0);
startacq(alfa);
acquire(np, 1.0/sw);
decprgoff();
decoff();
decblank();
}
else
status(C);
setreceiver(t11);
}
pulsesequence()
{
/* DECLARE AND LOAD VARIABLES */
char f1180[MAXSTR], /* Flag to start t1 @ halfdwell */
mag_flg[MAXSTR], /*magic-angle coherence transfer gradients */
f2180[MAXSTR], /* Flag to start t2 @ halfdwell */
C13refoc[MAXSTR], /* C13 sech/tanh pulse in middle of t1*/
NH2only[MAXSTR]; /* spectrum of only NH2 groups */
int icosel, /* used to get n and p type */
t1_counter, /* used for states tppi in t1 */
t2_counter, /* used for states tppi in t2 */
PRexp, /* projection-reconstruction flag */
ni2 = getval("ni2");
double tau1, /* t1 delay */
mix = getval("mix"), /* NOESY mix time */
tau2, /* t2 delay */
lambda = 0.94/(4.0*getval("JNH")), /* 1/4J H1 evolution delay */
tNH = 1.0/(4.0*getval("JNH")), /* 1/4J N15 evolution delay */
csa, sna,
pra = M_PI*getval("pra")/180.0,
/* temporary Pbox parameters */
bw, pws, ofs, ppm, nst, /* bandwidth, pulsewidth, offset, ppm, # steps */
/* the sech/tanh pulse is automatically calculated by the macro "biocal", */
/* and is called directly from your shapelib. */
pwClvl = getval("pwClvl"), /* coarse power for C13 pulse */
pwC = getval("pwC"), /* C13 90 degree pulse length at pwClvl */
rf0, /* maximum fine power when using pwC pulses */
rfst, /* fine power for the stCall pulse */
compH = getval("compH"), /* adjustment for H1 amplifier compression */
compC = getval("compC"), /* adjustment for C13 amplifier compression */
dof100, /* C13 frequency at 100ppm for both aliphatic & aromatic*/
tpwrsf = getval("tpwrsf"), /* fine power adjustment for flipback pulse*/
pwHs = getval("pwHs"), /* H1 90 degree pulse length at tpwrs */
tpwrs, /* power for the pwHs ("H2Osinc") pulse */
pwNlvl = getval("pwNlvl"), /* power for N15 pulses */
pwN = getval("pwN"), /* N15 90 degree pulse length at pwNlvl */
sw1 = getval("sw1"),
sw2 = getval("sw2"),
gzcal=getval("gzcal"),
gt1 = getval("gt1"), /* coherence pathway gradients */
gzlvl1 = getval("gzlvl1"),
gzlvl2 = getval("gzlvl2"),
gt0 = getval("gt0"), /* other gradients */
gt3 = getval("gt3"),
gt4 = getval("gt4"),
gt5 = getval("gt5"),
gstab = getval("gstab"),
gzlvl0 = getval("gzlvl0"),
gzlvl3 = getval("gzlvl3"),
gzlvl6 = getval("gzlvl6"),
gzlvl4 = getval("gzlvl4"),
gzlvl5 = getval("gzlvl5");
getstr("f1180",f1180);
getstr("mag_flg",mag_flg);
getstr("f2180",f2180);
getstr("C13refoc",C13refoc);
getstr("NH2only",NH2only);
csa = cos(pra);
sna = sin(pra);
/* LOAD PHASE TABLE */
settable(t1,2,phi1);
settable(t3,4,phi3);
settable(t9,16,phi9);
settable(t10,1,phi10);
settable(t11,8,rec);
/* INITIALIZE VARIABLES */
/* maximum fine power for pwC pulses (and initialize rfst) */
rf0 = 4095.0;
rfst=0.0;
setautocal(); /* activate auto-calibration flags */
if (autocal[0] == 'n')
{
/* 180 degree adiabatic C13 pulse from 0 to 200 ppm */
if (C13refoc[A]=='y')
{
rfst = (compC*4095.0*pwC*4000.0*sqrt((30.0*sfrq/600.0+7.0)/0.35));
rfst = (int) (rfst + 0.5);
if ( 1.0/(4000.0*sqrt((30.0*sfrq/600.0+7.0)/0.35)) < pwC )
{ text_error( " Not enough C13 RF. pwC must be %f usec or less.\n",
(1.0e6/(4000.0*sqrt((30.0*sfrq/600.0+7.0)/0.35))) );
psg_abort(1);
}
}
}
else /* if autocal = 'y'(yes), 'q'(quiet), r(read), or 's'(semi) */
{
if(FIRST_FID) /* call Pbox */
{
if (C13refoc[A]=='y')
{
ppm = getval("dfrq");
ofs = 0.0;
pws = 0.001; /* 1 ms long pulse */
bw = 200.0*ppm;
nst = 1000; /* nst - number of steps */
stC200 = pbox_makeA("stC200", "sech", bw, pws, ofs, compC*pwC, pwClvl, nst);
}
ofs_check(H1ofs, C13ofs, N15ofs, H2ofs);
}
if (C13refoc[A]=='y') rfst = stC200.pwrf;
}
/* 180 degree adiabatic C13 pulse from 0 to 200 ppm */
dof100 = dof + 65.0*dfrq;
/* selective H20 one-lobe sinc pulse */
tpwrs = tpwr - 20.0*log10(pwHs/((compH*pw)*1.69)); /* needs 1.69 times more */
tpwrs = (int) (tpwrs); /* power than a square pulse */
/* CHECK VALIDITY OF PARAMETER RANGES */
if ( (mix - gt4 - gt5) < 0.0 )
{ text_error("mix is too small. Make mix equal to %f or more.\n",(gt4 + gt5));
psg_abort(1);
}
if((dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y' ))
{
text_error("incorrect dec1 decoupler flags! Should be 'nnn' ");
psg_abort(1);
}
if((dm2[A] == 'y' || dm2[B] == 'y'))
{
text_error("incorrect dec2 decoupler flags! Should be 'nny' ");
psg_abort(1);
}
if( dpwr2 > 50 )
{
text_error("don't fry the probe, DPWR2 too large! ");
psg_abort(1);
}
if( pw > 20.0e-6 )
{
text_error("dont fry the probe, pw too high ! ");
psg_abort(1);
}
if( pwN > 100.0e-6 )
{
text_error("dont fry the probe, pwN too high ! ");
psg_abort(1);
}
/* PHASES AND INCREMENTED TIMES */
/* Phase incrementation for hypercomplex 2D data, States-Haberkorn element */
if (phase1 == 2)
tsadd(t1,1,4);
if (phase2 == 1)
{
tsadd(t10,2,4);
icosel = 1;
}
else icosel = -1;
/* Set up f1180 */
PRexp = 0;
if((pra > 0.0) && (pra < 90.0)) PRexp = 1;
if(PRexp) /* set up Projection-Reconstruction experiment */
tau1 = d2*csa;
else
tau1 = d2;
if((f1180[A] == 'y') && (ni > 1.0))
{
tau1 += ( 1.0 / (2.0*sw1) );
if(tau1 < 0.2e-6) tau1 = 0.0;
}
tau1 = tau1/2.0;
/* Set up f2180 */
if(PRexp)
tau2 = d2*sna;
else
{
tau2 = d3;
if((f2180[A] == 'y') && (ni2 > 1.0))
{
tau2 += ( 1.0 / (2.0*sw2) );
if(tau2 < 0.2e-6) tau2 = 0.0;
}
}
tau2 = tau2/2.0;
/* Calculate modifications to phases for States-TPPI acquisition */
if( ix == 1) d2_init = d2;
t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
if(t1_counter % 2)
{
tsadd(t1,2,4);
tsadd(t11,2,4);
}
if( ix == 1) d3_init = d3;
t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
if(t2_counter % 2)
{
tsadd(t3,2,4);
tsadd(t11,2,4);
}
/* Correct inverted signals for NH2 only spectra */
if (NH2only[A]=='y')
{
tsadd(t3,2,4);
}
/* BEGIN PULSE SEQUENCE */
status(A);
obspower(tpwr);
decpower(pwClvl);
dec2power(pwNlvl);
decoffset(dof);
decpwrf(rf0);
txphase(zero);
dec2phase(zero);
delay(d1);
dec2rgpulse(pwN, zero, 0.0, 0.0); /*destroy N15 and C13 magnetization*/
decrgpulse(pwC, zero, 0.0, 0.0);
zgradpulse(gzlvl0, 0.5e-3);
delay(1.0e-4);
dec2rgpulse(pwN, one, 0.0, 0.0);
decrgpulse(pwC, one, 0.0, 0.0);
zgradpulse(0.7*gzlvl0, 0.5e-3);
txphase(t1);
decphase(zero);
dec2phase(zero);
initval(135.0,v1);
obsstepsize(1.0);
xmtrphase(v1);
delay(5.0e-4);
rcvroff();
rgpulse(pw, t1, 50.0e-6, 0.0); /* 1H pulse excitation */
xmtrphase(zero); /* SAPS_DELAY */
txphase(zero);
if (tau1 > (2.0*GRADIENT_DELAY + pwN + 0.64*pw + 5.0*SAPS_DELAY))
{
if (tau1>0.002)
{
zgradpulse(gzlvl6, 0.8*(tau1 - 2.0*GRADIENT_DELAY - pwN - 0.64*pw));
delay(0.2*(tau1 - 2.0*GRADIENT_DELAY - pwN - 0.64*pw) - SAPS_DELAY);
}
else
{
delay(tau1-pwN-0.64*pw);
}
if (C13refoc[A]=='y')
sim3pulse(0.0, 2.0*pwC, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
else
dec2rgpulse(2.0*pwN, zero, 0.0, 0.0);
if (tau1>0.002)
{
zgradpulse(-1.0*gzlvl6, 0.8*(tau1 - 2.0*GRADIENT_DELAY - pwN - 0.64*pw));
delay(0.2*(tau1 - 2.0*GRADIENT_DELAY - pwN - 0.64*pw) - SAPS_DELAY);
}
else
{
delay(tau1-pwN-0.64*pw);
}
}
else if (tau1 > (0.64*pw + 0.5*SAPS_DELAY))
delay(2.0*tau1 - 2.0*0.64*pw - SAPS_DELAY );
rgpulse(pw, zero, 0.0, 0.0);
delay(mix - gt4 - gt5 -gstab -200.0e-6);
dec2rgpulse(pwN, zero, 0.0, 0.0);
zgradpulse(gzlvl4, gt4);
delay(gstab);
rgpulse(pw, zero, 200.0e-6,0.0); /* HSQC begins */
dec2phase(zero);
zgradpulse(gzlvl0, gt0);
delay(lambda - gt0);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
txphase(one);
zgradpulse(gzlvl0, gt0);
delay(lambda - gt0);
rgpulse(pw, one, 0.0, 0.0);
txphase(two);
if (tpwrsf<4095.0)
{
obspower(tpwrs+6.0);
obspwrf(tpwrsf);
shaped_pulse("H2Osinc", pwHs, two, 5.0e-4, 0.0);
obspower(tpwr);
obspwrf(4095.0);
}
else
{
obspower(tpwrs);
shaped_pulse("H2Osinc", pwHs, two, 5.0e-4, 0.0);
obspower(tpwr);
}
zgradpulse(gzlvl3, gt3);
dec2phase(t3);
decpwrf(rfst);
decoffset(dof100);
delay(2.0e-4);
dec2rgpulse(pwN, t3, 0.0, 0.0);
decphase(zero);
/* xxxxxxxxxxxxxxxxxx OPTIONS FOR N15 EVOLUTION xxxxxxxxxxxxxxxxxxxxx */
txphase(zero);
dec2phase(t9);
if (NH2only[A]=='y')
{
delay(tau2);
/* optional sech/tanh pulse in middle of t2 */
if (C13refoc[A]=='y') /* WFG_START_DELAY */
{ decshaped_pulse("stC200", 1.0e-3, zero, 0.0, 0.0);
delay(tNH - 1.0e-3 - WFG_START_DELAY - 2.0*pw);
}
else
{
delay(tNH - 2.0*pw);
}
rgpulse(2.0*pw, zero, 0.0, 0.0);
if (tNH < gt1 + 1.99e-4) delay(gt1 + 1.99e-4 - tNH);
delay(tau2);
dec2rgpulse(2.0*pwN, t9, 0.0, 0.0);
if (mag_flg[A] == 'y')
{
magradpulse(gzcal*gzlvl1, gt1);
}
else
{
zgradpulse(gzlvl1, gt1);
}
dec2phase(t10);
if (tNH > gt1 + 1.99e-4) delay(tNH - gt1 - 2.0*GRADIENT_DELAY);
else delay(1.99e-4 - 2.0*GRADIENT_DELAY);
}
else
{
if ( (C13refoc[A]=='y') && (tau2 > 0.5e-3 + WFG2_START_DELAY) )
{ delay(tau2 - 0.5e-3 - WFG2_START_DELAY); /* WFG2_START_DELAY */
simshaped_pulse("", "stC200", 2.0*pw, 1.0e-3, zero, zero, 0.0, 0.0);
delay(tau2 - 0.5e-3);
delay(gt1 + 2.0e-4);
}
else
{ delay(tau2);
rgpulse(2.0*pw, zero, 0.0, 0.0);
delay(gt1 + 2.0e-4 - 2.0*pw);
delay(tau2);
}
dec2rgpulse(2.0*pwN, t9, 0.0, 0.0);
if (mag_flg[A] == 'y')
{
magradpulse(gzcal*gzlvl1, gt1);
}
else
{
zgradpulse(gzlvl1, gt1);
}
dec2phase(t10);
delay(2.0e-4 - 2.0*GRADIENT_DELAY);
}
/* xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx */
sim3pulse(pw, 0.0, pwN, zero, zero, t10, 0.0, 0.0);
dec2phase(zero);
zgradpulse(gzlvl5, gt5);
delay(lambda - 1.5*pwN - gt5);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
zgradpulse(gzlvl5, gt5);
txphase(one);
dec2phase(one);
delay(lambda - 1.5*pwN - gt5);
sim3pulse(pw, 0.0, pwN, one, zero, one, 0.0, 0.0);
txphase(zero);
dec2phase(zero);
zgradpulse(1.5*gzlvl5, gt5);
delay(lambda - 1.5*pwN - gt5);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
zgradpulse(1.5*gzlvl5, gt5);
delay(lambda - pwN - 0.5*pw - gt5);
rgpulse(pw, zero, 0.0, 0.0);
delay((gt1/10.0) + 1.0e-4+ gstab - 0.5*pw + 2.0*GRADIENT_DELAY + POWER_DELAY);
rgpulse(2.0*pw, zero, 0.0, rof1);
dec2power(dpwr2); /* POWER_DELAY */
if (mag_flg[A] == 'y')
{
magradpulse(icosel*gzcal*gzlvl2, gt1/10.0);
}
else
{
zgradpulse(icosel*gzlvl2, gt1/10.0);
}
delay(gstab);
rcvron();
statusdelay(C,1.0e-4-rof1);
setreceiver(t11);
}
pulsesequence()
{
int t1_counter;
char CCLS[MAXSTR], /* C13 refocussing pulse in middle of t1 */
wtg3919[MAXSTR],
f1180[MAXSTR]; /* Flag to start t1 @ halfdwell */
double timeCT=getval("timeCT"),
tauxh, tau1,
gzlvl3=getval("gzlvl3"),
gzlvl4=getval("gzlvl4"),
gt3=getval("gt3"),
gt4=getval("gt4"),
gstab=getval("gstab"), /* gradient recovery delay */
JNH = getval("JNH"),
pwN = getval("pwN"),
pwNlvl = getval("pwNlvl"),
pwHs, tpwrs=0.0, compH=1.0, /* H1 90 degree pulse length at tpwrs */
sw1 = getval("sw1"),
/* temporary Pbox parameters */
pwClvl = getval("pwClvl"), /* coarse power for C13 pulse */
pwC = getval("pwC"); /* C13 90 degree pulse length at pwClvl */
getstr("CCLS",CCLS);
getstr("wtg3919",wtg3919);
getstr("f1180",f1180);
/* check validity of parameter range */
if((dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y' ))
{ text_error("incorrect Dec1 decoupler flags! "); psg_abort(1); }
if((dm2[A] == 'y' || dm2[B] == 'y') )
{ text_error("incorrect Dec2 decoupler flags! "); psg_abort(1); }
if( dpwr2 > 50 )
{ text_error("don't fry the probe, dpwr2 too large! "); psg_abort(1); }
/* INITIALIZE VARIABLES */
if(wtg3919[0] != 'y') /* selective H20 one-lobe sinc pulse needs 1.69 */
{ /* times more power than a square pulse */
pwHs = getval("pwHs");
compH = getval("compH");
}
else
pwHs = pw*2.385+7.0*rof1+d3*2.5;
tauxh = ((JNH != 0.0) ? 1/(4*(JNH)) : 2.25e-3);
setautocal(); /* activate auto-calibration flags */
if (autocal[0] == 'n')
{
if(wtg3919[0] != 'y') /* selective H20 one-lobe sinc pulse needs 1.69 */
{ /* times more power than a square pulse */
if (pwHs > 1e-6) tpwrs = tpwr - 20.0*log10(pwHs/(compH*pw*1.69));
else tpwrs = 0.0;
tpwrs = (int) (tpwrs);
}
}
else /* if autocal = 'y'(yes), 'q'(quiet), r(read), or 's'(semi) */
{
if(FIRST_FID) /* call Pbox */
{
if(wtg3919[0] != 'y')
H2Osinc = pbox_Rsh("H2Osinc", "sinc90", pwHs, 0.0, compH*pw, tpwr);
}
if (wtg3919[0] != 'y')
{ pwHs = H2Osinc.pw; tpwrs = H2Osinc.pwr-1.0; } /* 1dB correction applied */
}
/* LOAD VARIABLES */
if(ix == 1) d2_init = d2;
t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5);
/* Set up f1180 */
tau1 = d2;
if((f1180[A] == 'y') && (ni > 1.0))
{ tau1 += ( 1.0 / (2.0*sw1) ); if(tau1 < 0.2e-6) tau1 = 0.0; }
tau1 = tau1/2.0;
/* LOAD PHASE TABLES */
assign(one,v7);
assign(three,v8);
settable(t1, 4, phi1);
settable(t2, 2, phi2);
settable(t3, 8, phi3);
settable(t4, 16, phi4);
settable(t5, 8, rec);
if ( phase1 == 2 ) tsadd(t2, 1, 4);
if(t1_counter %2) /* calculate modification to phases based on */
{ tsadd(t2,2,4); tsadd(t5,2,4); } /* current t1 values */
if(wtg3919[0] != 'y')
{ add(one,v7,v7); add(one,v8,v8); }
/* sequence starts!! */
status(A);
obspower(tpwr);
dec2power(pwNlvl);
decpower(pwClvl); decpwrf(4095.0);
delay(d1);
status(B);
rgpulse(pw, zero, rof1, rof1);
zgradpulse(0.3*gzlvl3,gt3);
txphase(zero);
dec2phase(zero);
delay(tauxh-gt3); /* delay=1/4J(XH) */
sim3pulse(2*pw,0.0,2*pwN,t4,zero,zero,rof1,rof1);
zgradpulse(0.3*gzlvl3,gt3);
dec2phase(t2);
delay(tauxh-gt3 ); /* delay=1/4J(XH) */
rgpulse(pw, t1, rof1, rof1);
decphase(zero);
txphase(t4);
zgradpulse(gzlvl3,gt3);
delay(gstab);
dec2rgpulse(pwN, t2, rof1, rof1);
/* CT EVOLUTION BEGINS */
dec2phase(t3);
delay(timeCT -SAPS_DELAY -tau1);
if (CCLS[A]=='y')
{
sim3pulse(0.0, 2.0*pwC, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
delay(timeCT -2.0*pw);
rgpulse(2.0*pw, t4, 0.0, 0.0);
}
else
{
dec2rgpulse(2.0*pwN, zero, 0.0, 0.0);
delay(timeCT -2.0*pwC);
simpulse(2.0*pw, 2.0*pwC, t4, zero, 0.0, 0.0);
}
delay(tau1);
/* CT EVOLUTION ENDS */
dec2rgpulse(pwN, t3, rof1, rof1);
zgradpulse(gzlvl3,gt3);
delay(gstab);
rgpulse(pw, two, rof1, rof1);
decrgpulse(pwC, zero, rof1, rof1);
zgradpulse(gzlvl4,gt4);
txphase(v7); dec2phase(zero);
delay(tauxh -gt4 -pwHs -rof1 -2.0*pwC -2.0*rof1);
if(wtg3919[0] == 'y')
{
rgpulse(pw*0.231,v7,rof1,rof1);
delay(d3);
rgpulse(pw*0.692,v7,rof1,rof1);
delay(d3);
rgpulse(pw*1.462,v7,rof1,rof1);
delay(d3/2-pwN);
dec2rgpulse(2*pwN, zero, rof1, rof1);
txphase(v8);
delay(d3/2-pwN);
rgpulse(pw*1.462,v8,rof1,rof1);
delay(d3);
rgpulse(pw*0.692,v8,rof1,rof1);
delay(d3);
rgpulse(pw*0.231,v8,rof1,rof1);
}
else
{
obspower(tpwrs);
shaped_pulse("H2Osinc", pwHs, v7, rof1, 0.0);
obspower(tpwr);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, v8, zero, zero, 0.0, 0.0);
obspower(tpwrs);
shaped_pulse("H2Osinc", pwHs, v7, rof1, 0.0);
obspower(tpwr);
}
zgradpulse(gzlvl4,gt4);
delay(tauxh -gt4 -pwHs -rof1 -POWER_DELAY);
dec2power(dpwr2);
status(C);
setreceiver(t5);
}
pulsesequence() {
// Define Variables and Objects and Get Parameter Values
CP hy = getcp("HY",0.0,0.0,0,1);
strncpy(hy.fr,"dec",3);
strncpy(hy.to,"dec2",4);
putCmd("frHY='dec'\n");
putCmd("toHY='dec2'\n");
GP inept = getinept("ineptYX");
strncpy(inept.ch1,"dec2",4);
strncpy(inept.ch2,"obs",3);
putCmd("ch1YXinept='dec2'\n");
putCmd("ch2YXinept='obs'\n");
DSEQ dec = getdseq("H");
strncpy(dec.t.ch,"dec",3);
putCmd("chHtppm='dec'\n");
strncpy(dec.s.ch,"dec",3);
putCmd("chHspinal='dec'\n");
DSEQ mix = getdseq("Hmix");
strncpy(mix.t.ch,"dec",3);
putCmd("chHmixtppm='dec'\n");
strncpy(mix.s.ch,"dec",3);
putCmd("chHmixspinal='dec'\n");
// Dutycycle Protection
double simpw1 = inept.pw1;
if (inept.pw2 > inept.pw1) simpw1 = inept.pw2;
double simpw2 = inept.pw3;
if (inept.pw4 > inept.pw3) simpw2 = inept.pw4;
DUTY d = init_dutycycle();
d.dutyon = getval("pwH90") + getval("tHY") + 2.0*simpw1 + 2.0*simpw2;
d.dutyoff = d1 + 4.0e-6;
d.c1 = d.c1 + (!strcmp(dec.seq,"tppm"));
d.c1 = d.c1 + ((!strcmp(dec.seq,"tppm")) && (dec.t.a > 0.0));
d.t1 = inept.t1 + inept.t2 + inept.t3 + inept.t4 +
getval("rd") + getval("ad") + at;
d.c2 = d.c2 + (!strcmp(dec.seq,"spinal"));
d.c2 = d.c2 + ((!strcmp(dec.seq,"spinal")) && (dec.s.a > 0.0));
d.t2 = inept.t1 + inept.t2 + inept.t3 + inept.t4 +
getval("rd") + getval("ad") + at;
d = update_dutycycle(d);
abort_dutycycle(d,10.0);
// Set Phase Tables
settable(phH90,16,table1);
settable(phHhy,4,table2);
settable(phYhy,4,table3);
settable(ph1Yyxinept,4,table4);
settable(ph1Xyxinept,4,table5);
settable(ph2Yyxinept,4,table6);
settable(ph2Xyxinept,16,table7);
settable(ph3Yyxinept,8,table8);
settable(ph3Xyxinept,4,table9);
settable(phRec,8,table10);
setreceiver(phRec);
// Begin Sequence
txphase(ph1Xyxinept); decphase(phH90); dec2phase(phYhy);
obspwrf(getval("aXyxinept")); decpwrf(getval("aH90")); dec2pwrf(getval("aYhy"));
obsunblank(); decunblank(); _unblank34();
delay(d1);
sp1on(); delay(2.0e-6); sp1off(); delay(2.0e-6);
// H to Y Cross Polarization
decrgpulse(getval("pwH90"),phH90,0.0,0.0);
decphase(phHhy);
_cp_(hy,phHhy,phYhy);
decphase(zero);
// INEPT Transfer from Y to X
_dseqon(mix);
_ineptref(inept,ph1Yyxinept,ph1Xyxinept,ph2Yyxinept,ph2Xyxinept,ph3Yyxinept,ph3Xyxinept);
_dseqoff(mix);
// Begin Acquisition
_dseqon(dec);
obsblank(); _blank34();
delay(getval("rd"));
startacq(getval("ad"));
acquire(np, 1/sw);
endacq();
_dseqoff(dec);
obsunblank(); decunblank(); _unblank34();
}
pulsesequence()
{
/* DECLARE AND LOAD VARIABLES */
char f1180[MAXSTR], /* Flag to start t1 @ halfdwell */
C13refoc[MAXSTR], /* C13 sech/tanh pulse in middle of t1*/
Cshape[MAXSTR], /* CACO inversion 180 pulse */
water_sat[MAXSTR]; /* saturate/non-saturate water flag */
int icosel; /* used to get n and p type */
double tau1, /* t1 delay */
tpwrs,
tpwrsf_d = getval("tpwrsf_d"), /* fine power adustment for first soft pulse(down)*/
tpwrsf_u = getval("tpwrsf_u"), /* fine power adustment for second soft pulse(up) */
pwHs = getval("pwHs"), /* H1 90 degree pulse length at tpwrs */
compH =getval("compH"),
lambda = 1.0/(4.0*getval("JNH")), /* 1/4J H1 evolution delay */
tNH = 1.0/(4.0*getval("JNH")), /* 1/4J N15 evolution delay */
tau_cp= getval("tau_cp"), /* 1/4 of overall relaxation increment */
ncyc=getval("ncyc"), /* number of pulsed cycles in relaxT */
pwClvl = getval("pwClvl"), /* coarse power for C13 pulse */
pwC = getval("pwC"), /* C13 90 degree pulse length at pwClvl */
C180pw=getval("C180pw"),
C180pwr=getval("C180pwr"), /* 13C decoupling pulse parameters */
compN = getval("compN"), /* adjustment for N15 amplifier compression */
compC = getval("compC"), /* adjustment for C13 amplifier compression */
pwNlvl = getval("pwNlvl"), /* power for N15 pulses */
pwN = getval("pwN"), /* N15 90 degree pulse length at pwNlvl */
sw1 = getval("sw1"),
gt1 = getval("gt1"),
gt2 = getval("gt2"),
/* coherence pathway gradients */
gzlvl1 = getval("gzlvl1"),
gzlvl2 = getval("gzlvl2"),
gt0 = getval("gt0"), /* other gradients */
gt3 = getval("gt3"),
gt4 = getval("gt4"),
gt5 = getval("gt5"),
gt6 = getval("gt6"),
gt7 = getval("gt7"),
gstab = getval("gstab"),
gzlvl0 = getval("gzlvl0"),
gzlvl3 = getval("gzlvl3"),
gzlvl4 = getval("gzlvl4"),
gzlvl5 = getval("gzlvl5"),
gzlvl6 = getval("gzlvl6"),
gzlvl7 = getval("gzlvl7");
getstr("f1180",f1180);
getstr("C13refoc",C13refoc);
getstr("Cshape",Cshape);
getstr("water_sat",water_sat);
tpwrs = tpwr - 20.0*log10(pwHs/(compH*pw*1.69)); /*needs 1.69 times more*/
tpwrs = (int) (tpwrs); /*power than a square pulse */
if (tpwrsf_d<4095.0)
tpwrs=tpwrs+6.0; /* add 6dB to let tpwrsf_d control fine power ~2048*/
/* LOAD PHASE TABLE */
settable(t1,4,phi1);
settable(t2,4,phi2);
settable(t3,4,phi3);
settable(t10,1,phi10);
settable(t31,4,rec);
/* CHECK VALIDITY OF PARAMETER RANGES */
if((dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y' ))
{ text_error("incorrect dec1 decoupler flags! Should be 'nnn' "); psg_abort(1); }
if((dm2[A] == 'y' || dm2[B] == 'y'))
{ text_error("incorrect dec2 decoupler flags! Should be 'nny' "); psg_abort(1); }
if( dpwr2 > 50 )
{ text_error("don't fry the probe, DPWR2 too large! "); psg_abort(1); }
if( pw > 50.0e-6 )
{ text_error("dont fry the probe, pw too high ! "); psg_abort(1); }
if( pwN > 100.0e-6 )
{ text_error("dont fry the probe, pwN too high ! "); psg_abort(1); }
/* PHASES AND INCREMENTED TIMES */
/* Phase incrementation for hypercomplex 2D data, States-Haberkorn element */
icosel = -1;
if (phase1 == 1) {tsadd(t10,2,4); icosel = +1;}
/* Set up f1180 */
tau1 = d2;
if((f1180[A] == 'y') && (ni > 1.0))
{ tau1 += ( 1.0 / (2.0*sw1) ); if(tau1 < 0.2e-6) tau1 = 0.0; }
tau1 = tau1/2.0;
/* Calculate modifications to phases for States-TPPI acquisition */
if(d2_index % 2) { tsadd(t1,2,4); tsadd(t31,2,4); }
/* BEGIN PULSE SEQUENCE */
status(A);
obspower(tpwr);
decpower(pwClvl);
dec2power(pwNlvl);
txphase(zero);
decphase(zero);
dec2phase(zero);
delay(d1);
status(B);
dec2rgpulse(pwN, zero, 0.0, 0.0); /*destroy N15 magnetization*/
zgradpulse(gzlvl0, 0.5e-3);
delay(1.0e-4);
rgpulse(pw,zero,rof1,rof1); /* 1H pulse excitation */
delay(gstab);
zgradpulse(gzlvl0, gt0);
delay(lambda - gt0 -gstab);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
txphase(one);
delay(lambda - gt0 -gstab);
zgradpulse(gzlvl0, gt0);
delay(gstab);
rgpulse(pw, one, rof1, rof1); /* on NzHz now */
if(water_sat[A]=='n') /* water to -Z */
{
obspower(tpwrs); obspwrf(tpwrsf_d);
shaped_pulse("H2osinc",pwHs,two,rof1,rof1);
obspower(tpwr); obspwrf(4095.0);
}
/* purge */
zgradpulse(gzlvl3, gt3);
delay(gstab);
/* HzNz-> Nz */
dec2rgpulse( pwN, zero, 0.0, 0.0);
delay(gstab);
zgradpulse(gzlvl6, gt0);
delay(lambda - gt0 -gstab);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
dec2phase(t3);
delay(lambda - gt0 -gstab);
zgradpulse(gzlvl6, gt0);
delay(gstab);
dec2rgpulse( pwN, t3, 0.0, 0.0);
/* purge */
zgradpulse(gzlvl7, gt7);
dec2phase(t3);
delay(gstab);
/* T1 relaxation delay */
if(ncyc > 0)
{
initval(ncyc,v4);
loop(v4,v5);
initval(2.0,v8);
loop(v8,v9);
if(water_sat[A]=='n') /* water to +Z */
{
delay(tau_cp-pw -rof1 -pwHs - 2.0*rof1-2.0*POWER_DELAY-WFG_START_DELAY -WFG_STOP_DELAY );
obspower(tpwrs); obspwrf(tpwrsf_d);
shaped_pulse("H2osinc",pwHs,two,rof1,rof1);
obspower(tpwr); obspwrf(4095.0);
rgpulse(2.0*pw, zero, rof1, rof1);
obspower(tpwrs); obspwrf(tpwrsf_u);
shaped_pulse("H2osinc",pwHs,two,rof1,rof1);
obspower(tpwr);
delay(tau_cp-pw -rof1 -pwHs - 2.0*rof1-2.0*POWER_DELAY-WFG_START_DELAY -WFG_STOP_DELAY );
}
else /* just don't bother about water */
{
delay(tau_cp-pw -rof1);
rgpulse(2.0*pw, zero, rof1, rof1);
delay(tau_cp-pw -rof1);
}
endloop(v9); /* repeat two times */
endloop(v5);
}
/* 15N evolution, t1 */
txphase(zero);
dec2phase(t1);
dec2rgpulse( pwN, t1, 0.0, 0.0);
delay(tau1);
rgpulse(2.0*pw, zero, 0.0, 0.0);
if(C13refoc[A]=='y')
{
decpower(C180pwr);
decshaped_pulse(Cshape, C180pw, zero, 0.0, 0.0);
decpower(pwClvl);
}
delay(tau1);
/* coding */
delay(lambda -gt1 -gstab -2.0*POWER_DELAY - C180pw);
if(C13refoc[A]!='y') delay(2.0*POWER_DELAY + C180pw);
zgradpulse(-icosel*gzlvl1, gt1); delay(gstab);
dec2rgpulse(2.0*pwN, zero, 0.0, 0.0);
rgpulse(2.0*pw, zero, 0.0, 0.0);
zgradpulse(icosel*gzlvl1, gt1); delay(gstab); /* 2.0*GRADIENT_DELAY */
delay(lambda -gt1 -gstab);
dec2phase(t10);
/* reverse INEPT */
sim3pulse(pw, 0.0, pwN, zero, zero, t10, 0.0, 0.0);
txphase(zero);
dec2phase(zero);
delay(gstab);
zgradpulse(gzlvl4, gt5);
delay(lambda -gt5 -gstab);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
txphase(one);
dec2phase(one);
delay(lambda - gt5 -gstab);
zgradpulse(gzlvl4, gt5);
delay(gstab);
sim3pulse(pw, 0.0, pwN, one, zero, one, 0.0, 0.0);
txphase(zero);
dec2phase(zero);
delay(gstab);
zgradpulse( gzlvl5, gt5);
delay(lambda - gt5 -gstab);
sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
delay(lambda - gt5 -gstab);
zgradpulse(gzlvl5, gt5);
delay(gstab);
rgpulse(pw, zero, 0.0, 0.0);
delay(gt2 +gstab - 0.65*pw + 2.0*GRADIENT_DELAY + 2.0*POWER_DELAY);
rgpulse(2.0*pw, zero, rof1, rof1);
dec2power(dpwr2); decpower(dpwr); /* POWER_DELAY */
zgradpulse( gzlvl2, gt2); /* 2.0*GRADIENT_DELAY */
delay(gstab -10.0e-6);
statusdelay(C,10.0e-6);
setreceiver(t31);
}
