int join_mesh_exec(bContext *C, wmOperator *op)
{
Main *bmain= CTX_data_main(C);
Scene *scene= CTX_data_scene(C);
Object *ob= CTX_data_active_object(C);
Material **matar, *ma;
Mesh *me;
MVert *mvert, *mv;
MEdge *medge = NULL;
MFace *mface = NULL;
Key *key, *nkey=NULL;
KeyBlock *kb, *okb, *kbn;
float imat[4][4], cmat[4][4], *fp1, *fp2, curpos;
int a, b, totcol, totmat=0, totedge=0, totvert=0, totface=0, ok=0;
int vertofs, *matmap=NULL;
int i, j, index, haskey=0, edgeofs, faceofs;
bDeformGroup *dg, *odg;
MDeformVert *dvert;
CustomData vdata, edata, fdata;
if(scene->obedit) {
BKE_report(op->reports, RPT_WARNING, "Cant join while in editmode");
return OPERATOR_CANCELLED;
}
/* ob is the object we are adding geometry to */
if(!ob || ob->type!=OB_MESH) {
BKE_report(op->reports, RPT_WARNING, "Active object is not a mesh");
return OPERATOR_CANCELLED;
}
/* count & check */
CTX_DATA_BEGIN(C, Base*, base, selected_editable_bases) {
if(base->object->type==OB_MESH) {
me= base->object->data;
totvert+= me->totvert;
totedge+= me->totedge;
totface+= me->totface;
totmat+= base->object->totcol;
if(base->object == ob)
ok= 1;
/* check for shapekeys */
if(me->key)
haskey++;
}
}
CTX_DATA_END;
/* that way the active object is always selected */
if(ok==0) {
BKE_report(op->reports, RPT_WARNING, "Active object is not a selected mesh");
return OPERATOR_CANCELLED;
}
/* only join meshes if there are verts to join, there aren't too many, and we only had one mesh selected */
me= (Mesh *)ob->data;
key= me->key;
if(totvert==0 || totvert==me->totvert) {
BKE_report(op->reports, RPT_WARNING, "No mesh data to join");
return OPERATOR_CANCELLED;
}
if(totvert > MESH_MAX_VERTS) {
BKE_reportf(op->reports, RPT_WARNING, "Joining results in %d vertices, limit is " STRINGIFY(MESH_MAX_VERTS), totvert);
return OPERATOR_CANCELLED;
}
/* new material indices and material array */
matar= MEM_callocN(sizeof(void*)*totmat, "join_mesh matar");
if (totmat) matmap= MEM_callocN(sizeof(int)*totmat, "join_mesh matmap");
totcol= ob->totcol;
/* obact materials in new main array, is nicer start! */
for(a=0; a<ob->totcol; a++) {
matar[a]= give_current_material(ob, a+1);
id_us_plus((ID *)matar[a]);
/* increase id->us : will be lowered later */
}
/* - if destination mesh had shapekeys, move them somewhere safe, and set up placeholders
* with arrays that are large enough to hold shapekey data for all meshes
* - if destination mesh didn't have shapekeys, but we encountered some in the meshes we're
* joining, set up a new keyblock and assign to the mesh
*/
if(key) {
/* make a duplicate copy that will only be used here... (must remember to free it!) */
nkey= copy_key(key);
/* for all keys in old block, clear data-arrays */
for(kb= key->block.first; kb; kb= kb->next) {
if(kb->data) MEM_freeN(kb->data);
kb->data= MEM_callocN(sizeof(float)*3*totvert, "join_shapekey");
kb->totelem= totvert;
kb->weights= NULL;
}
}
else if(haskey) {
/* add a new key-block and add to the mesh */
key= me->key= add_key((ID *)me);
key->type = KEY_RELATIVE;
}
/* first pass over objects - copying materials and vertexgroups across */
CTX_DATA_BEGIN(C, Base*, base, selected_editable_bases) {
/* only act if a mesh, and not the one we're joining to */
if((ob!=base->object) && (base->object->type==OB_MESH)) {
me= base->object->data;
/* Join this object's vertex groups to the base one's */
for(dg=base->object->defbase.first; dg; dg=dg->next) {
/* See if this group exists in the object (if it doesn't, add it to the end) */
if(!defgroup_find_name(ob, dg->name)) {
odg = MEM_callocN(sizeof(bDeformGroup), "join deformGroup");
memcpy(odg, dg, sizeof(bDeformGroup));
BLI_addtail(&ob->defbase, odg);
}
}
if(ob->defbase.first && ob->actdef==0)
ob->actdef=1;
if(me->totvert) {
/* Add this object's materials to the base one's if they don't exist already (but only if limits not exceeded yet) */
if(totcol < MAXMAT) {
for(a=1; a<=base->object->totcol; a++) {
ma= give_current_material(base->object, a);
for(b=0; b<totcol; b++) {
if(ma == matar[b]) break;
}
if(b==totcol) {
matar[b]= ma;
if(ma) {
id_us_plus(&ma->id);
}
totcol++;
}
if(totcol >= MAXMAT)
break;
}
}
/* if this mesh has shapekeys, check if destination mesh already has matching entries too */
if(me->key && key) {
for(kb= me->key->block.first; kb; kb= kb->next) {
/* if key doesn't exist in destination mesh, add it */
if(key_get_named_keyblock(key, kb->name) == NULL) {
/* copy this existing one over to the new shapekey block */
kbn= MEM_dupallocN(kb);
kbn->prev= kbn->next= NULL;
/* adjust adrcode and other settings to fit (allocate a new data-array) */
kbn->data= MEM_callocN(sizeof(float)*3*totvert, "joined_shapekey");
kbn->totelem= totvert;
kbn->weights= NULL;
okb= key->block.last;
curpos= (okb) ? okb->pos : -0.1f;
if(key->type == KEY_RELATIVE)
kbn->pos= curpos + 0.1f;
else
kbn->pos= curpos;
BLI_addtail(&key->block, kbn);
kbn->adrcode= key->totkey;
key->totkey++;
if(key->totkey==1) key->refkey= kbn;
// XXX 2.5 Animato
#if 0
/* also, copy corresponding ipo-curve to ipo-block if applicable */
if(me->key->ipo && key->ipo) {
// FIXME... this is a luxury item!
puts("FIXME: ignoring IPO's when joining shapekeys on Meshes for now...");
}
#endif
}
}
}
}
}
}
CTX_DATA_END;
/* setup new data for destination mesh */
memset(&vdata, 0, sizeof(vdata));
memset(&edata, 0, sizeof(edata));
memset(&fdata, 0, sizeof(fdata));
mvert= CustomData_add_layer(&vdata, CD_MVERT, CD_CALLOC, NULL, totvert);
medge= CustomData_add_layer(&edata, CD_MEDGE, CD_CALLOC, NULL, totedge);
mface= CustomData_add_layer(&fdata, CD_MFACE, CD_CALLOC, NULL, totface);
vertofs= 0;
edgeofs= 0;
faceofs= 0;
/* inverse transform for all selected meshes in this object */
invert_m4_m4(imat, ob->obmat);
CTX_DATA_BEGIN(C, Base*, base, selected_editable_bases) {
/* only join if this is a mesh */
if(base->object->type==OB_MESH) {
me= base->object->data;
if(me->totvert) {
/* standard data */
CustomData_merge(&me->vdata, &vdata, CD_MASK_MESH, CD_DEFAULT, totvert);
CustomData_copy_data(&me->vdata, &vdata, 0, vertofs, me->totvert);
/* vertex groups */
dvert= CustomData_get(&vdata, vertofs, CD_MDEFORMVERT);
/* NB: vertex groups here are new version */
if(dvert) {
for(i=0; i<me->totvert; i++) {
for(j=0; j<dvert[i].totweight; j++) {
/* Find the old vertex group */
odg = BLI_findlink(&base->object->defbase, dvert[i].dw[j].def_nr);
if(odg) {
/* Search for a match in the new object, and set new index */
for(dg=ob->defbase.first, index=0; dg; dg=dg->next, index++) {
if(!strcmp(dg->name, odg->name)) {
dvert[i].dw[j].def_nr = index;
break;
}
}
}
}
}
}
/* if this is the object we're merging into, no need to do anything */
if(base->object != ob) {
/* watch this: switch matmul order really goes wrong */
mul_m4_m4m4(cmat, base->object->obmat, imat);
/* transform vertex coordinates into new space */
for(a=0, mv=mvert; a < me->totvert; a++, mv++) {
mul_m4_v3(cmat, mv->co);
}
/* for each shapekey in destination mesh:
* - if there's a matching one, copy it across (will need to transform vertices into new space...)
* - otherwise, just copy own coordinates of mesh (no need to transform vertex coordinates into new space)
*/
if(key) {
/* if this mesh has any shapekeys, check first, otherwise just copy coordinates */
for(kb= key->block.first; kb; kb= kb->next) {
/* get pointer to where to write data for this mesh in shapekey's data array */
fp1= ((float *)kb->data) + (vertofs*3);
/* check if this mesh has such a shapekey */
okb= key_get_named_keyblock(me->key, kb->name);
if(okb) {
/* copy this mesh's shapekey to the destination shapekey (need to transform first) */
fp2= ((float *)(okb->data));
for(a=0; a < me->totvert; a++, fp1+=3, fp2+=3) {
VECCOPY(fp1, fp2);
mul_m4_v3(cmat, fp1);
}
}
else {
/* copy this mesh's vertex coordinates to the destination shapekey */
mv= mvert;
for(a=0; a < me->totvert; a++, fp1+=3, mv++) {
VECCOPY(fp1, mv->co);
}
}
}
}
}
else {
/* for each shapekey in destination mesh:
* - if it was an 'original', copy the appropriate data from nkey
* - otherwise, copy across plain coordinates (no need to transform coordinates)
*/
if(key) {
for(kb= key->block.first; kb; kb= kb->next) {
/* get pointer to where to write data for this mesh in shapekey's data array */
fp1= ((float *)kb->data) + (vertofs*3);
/* check if this was one of the original shapekeys */
okb= key_get_named_keyblock(nkey, kb->name);
if(okb) {
/* copy this mesh's shapekey to the destination shapekey */
fp2= ((float *)(okb->data));
for(a=0; a < me->totvert; a++, fp1+=3, fp2+=3) {
VECCOPY(fp1, fp2);
}
}
else {
/* copy base-coordinates to the destination shapekey */
mv= mvert;
for(a=0; a < me->totvert; a++, fp1+=3, mv++) {
VECCOPY(fp1, mv->co);
}
}
}
}
}
/* advance mvert pointer to end of base mesh's data */
mvert+= me->totvert;
}
if(me->totface) {
/* make mapping for materials */
for(a=1; a<=base->object->totcol; a++) {
ma= give_current_material(base->object, a);
for(b=0; b<totcol; b++) {
if(ma == matar[b]) {
matmap[a-1]= b;
break;
}
}
}
if(base->object!=ob)
multiresModifier_prepare_join(scene, base->object, ob);
CustomData_merge(&me->fdata, &fdata, CD_MASK_MESH, CD_DEFAULT, totface);
CustomData_copy_data(&me->fdata, &fdata, 0, faceofs, me->totface);
for(a=0; a<me->totface; a++, mface++) {
mface->v1+= vertofs;
mface->v2+= vertofs;
mface->v3+= vertofs;
if(mface->v4) mface->v4+= vertofs;
if (matmap)
mface->mat_nr= matmap[(int)mface->mat_nr];
else
mface->mat_nr= 0;
}
faceofs += me->totface;
}
if(me->totedge) {
CustomData_merge(&me->edata, &edata, CD_MASK_MESH, CD_DEFAULT, totedge);
CustomData_copy_data(&me->edata, &edata, 0, edgeofs, me->totedge);
for(a=0; a<me->totedge; a++, medge++) {
medge->v1+= vertofs;
medge->v2+= vertofs;
}
edgeofs += me->totedge;
}
/* vertofs is used to help newly added verts be reattached to their edge/face
* (cannot be set earlier, or else reattaching goes wrong)
*/
vertofs += me->totvert;
/* free base, now that data is merged */
if(base->object != ob)
ED_base_object_free_and_unlink(bmain, scene, base);
}
}
CTX_DATA_END;
/* return to mesh we're merging to */
me= ob->data;
CustomData_free(&me->vdata, me->totvert);
CustomData_free(&me->edata, me->totedge);
CustomData_free(&me->fdata, me->totface);
me->totvert= totvert;
me->totedge= totedge;
me->totface= totface;
me->vdata= vdata;
me->edata= edata;
me->fdata= fdata;
mesh_update_customdata_pointers(me);
/* old material array */
for(a=1; a<=ob->totcol; a++) {
ma= ob->mat[a-1];
if(ma) ma->id.us--;
}
for(a=1; a<=me->totcol; a++) {
ma= me->mat[a-1];
if(ma) ma->id.us--;
}
if(ob->mat) MEM_freeN(ob->mat);
if(ob->matbits) MEM_freeN(ob->matbits);
if(me->mat) MEM_freeN(me->mat);
ob->mat= me->mat= NULL;
ob->matbits= NULL;
if(totcol) {
me->mat= matar;
ob->mat= MEM_callocN(sizeof(void *)*totcol, "join obmatar");
ob->matbits= MEM_callocN(sizeof(char)*totcol, "join obmatbits");
}
else
MEM_freeN(matar);
ob->totcol= me->totcol= totcol;
ob->colbits= 0;
if (matmap) MEM_freeN(matmap);
/* other mesh users */
test_object_materials((ID *)me);
/* free temp copy of destination shapekeys (if applicable) */
if(nkey) {
// XXX 2.5 Animato
#if 0
/* free it's ipo too - both are not actually freed from memory yet as ID-blocks */
if(nkey->ipo) {
free_ipo(nkey->ipo);
BLI_remlink(&bmain->ipo, nkey->ipo);
MEM_freeN(nkey->ipo);
}
#endif
free_key(nkey);
BLI_remlink(&bmain->key, nkey);
MEM_freeN(nkey);
}
DAG_scene_sort(bmain, scene); // removed objects, need to rebuild dag before editmode call
#if 0
ED_object_enter_editmode(C, EM_WAITCURSOR);
ED_object_exit_editmode(C, EM_FREEDATA|EM_WAITCURSOR|EM_DO_UNDO);
#else
/* toggle editmode using lower level functions so this can be called from python */
make_editMesh(scene, ob);
load_editMesh(scene, ob);
free_editMesh(me->edit_mesh);
MEM_freeN(me->edit_mesh);
me->edit_mesh= NULL;
DAG_id_tag_update(&ob->id, OB_RECALC_OB|OB_RECALC_DATA);
#endif
WM_event_add_notifier(C, NC_SCENE|ND_OB_ACTIVE, scene);
return OPERATOR_FINISHED;
}
/* seems messy, but thats what you get with not using pointers but channel names :) */
void ED_armature_bone_rename(bArmature *arm, const char *oldnamep, const char *newnamep)
{
Object *ob;
char newname[MAXBONENAME];
char oldname[MAXBONENAME];
/* names better differ! */
if (!STREQLEN(oldnamep, newnamep, MAXBONENAME)) {
/* we alter newname string... so make copy */
BLI_strncpy(newname, newnamep, MAXBONENAME);
/* we use oldname for search... so make copy */
BLI_strncpy(oldname, oldnamep, MAXBONENAME);
/* now check if we're in editmode, we need to find the unique name */
if (arm->edbo) {
EditBone *eBone = ED_armature_bone_find_name(arm->edbo, oldname);
if (eBone) {
unique_editbone_name(arm->edbo, newname, NULL);
BLI_strncpy(eBone->name, newname, MAXBONENAME);
}
else {
return;
}
}
else {
Bone *bone = BKE_armature_find_bone_name(arm, oldname);
if (bone) {
unique_bone_name(arm, newname);
BLI_strncpy(bone->name, newname, MAXBONENAME);
}
else {
return;
}
}
/* do entire dbase - objects */
for (ob = G.main->object.first; ob; ob = ob->id.next) {
ModifierData *md;
/* we have the object using the armature */
if (arm == ob->data) {
Object *cob;
/* Rename the pose channel, if it exists */
if (ob->pose) {
bPoseChannel *pchan = BKE_pose_channel_find_name(ob->pose, oldname);
if (pchan) {
GHash *gh = ob->pose->chanhash;
/* remove the old hash entry, and replace with the new name */
if (gh) {
BLI_assert(BLI_ghash_haskey(gh, pchan->name));
BLI_ghash_remove(gh, pchan->name, NULL, NULL);
}
BLI_strncpy(pchan->name, newname, MAXBONENAME);
if (gh) {
BLI_ghash_insert(gh, pchan->name, pchan);
}
}
BLI_assert(BKE_pose_channels_is_valid(ob->pose) == true);
}
/* Update any object constraints to use the new bone name */
for (cob = G.main->object.first; cob; cob = cob->id.next) {
if (cob->constraints.first)
constraint_bone_name_fix(ob, &cob->constraints, oldname, newname);
if (cob->pose) {
bPoseChannel *pchan;
for (pchan = cob->pose->chanbase.first; pchan; pchan = pchan->next) {
constraint_bone_name_fix(ob, &pchan->constraints, oldname, newname);
}
}
}
}
/* See if an object is parented to this armature */
if (ob->parent && (ob->parent->data == arm)) {
if (ob->partype == PARBONE) {
/* bone name in object */
if (STREQ(ob->parsubstr, oldname))
BLI_strncpy(ob->parsubstr, newname, MAXBONENAME);
}
}
if (modifiers_usesArmature(ob, arm)) {
bDeformGroup *dg = defgroup_find_name(ob, oldname);
if (dg) {
BLI_strncpy(dg->name, newname, MAXBONENAME);
}
}
/* fix modifiers that might be using this name */
for (md = ob->modifiers.first; md; md = md->next) {
switch (md->type) {
case eModifierType_Hook:
{
HookModifierData *hmd = (HookModifierData *)md;
if (hmd->object && (hmd->object->data == arm)) {
if (STREQ(hmd->subtarget, oldname))
BLI_strncpy(hmd->subtarget, newname, MAXBONENAME);
}
break;
}
case eModifierType_UVWarp:
{
UVWarpModifierData *umd = (UVWarpModifierData *)md;
if (umd->object_src && (umd->object_src->data == arm)) {
if (STREQ(umd->bone_src, oldname))
BLI_strncpy(umd->bone_src, newname, MAXBONENAME);
}
if (umd->object_dst && (umd->object_dst->data == arm)) {
if (STREQ(umd->bone_dst, oldname))
BLI_strncpy(umd->bone_dst, newname, MAXBONENAME);
}
break;
}
default:
break;
}
}
}
/* Fix all animdata that may refer to this bone - we can't just do the ones attached to objects, since
* other ID-blocks may have drivers referring to this bone [#29822]
*/
// XXX: the ID here is for armatures, but most bone drivers are actually on the object instead...
{
BKE_animdata_fix_paths_rename_all(&arm->id, "pose.bones", oldname, newname);
}
/* correct view locking */
{
bScreen *screen;
for (screen = G.main->screen.first; screen; screen = screen->id.next) {
ScrArea *sa;
/* add regions */
for (sa = screen->areabase.first; sa; sa = sa->next) {
SpaceLink *sl;
for (sl = sa->spacedata.first; sl; sl = sl->next) {
if (sl->spacetype == SPACE_VIEW3D) {
View3D *v3d = (View3D *)sl;
if (v3d->ob_centre && v3d->ob_centre->data == arm) {
if (STREQ(v3d->ob_centre_bone, oldname)) {
BLI_strncpy(v3d->ob_centre_bone, newname, MAXBONENAME);
}
}
}
}
}
}
}
}
}
