void mct_ShowNozzle(uint8_t line, uint8_t extruder)
{
mct_Show(line, itostr3(intround(degTargetHotend(extruder))));
}
static void lcd_fc()
{
if (fil_temp == 200)
{
setTargetHotend0(plaPreheatHotendTemp);
}
if (fil_temp == 230)
{
setTargetHotend0(absPreheatHotendTemp);
}
setWatch(); // heater sanity check timer
if (!isHeatingHotend(0)&&(filament_seq == 0))
{
filament_seq = 1;
}
if ((filament_seq == 0)&&(pausa_display == 0))
{
pausa_display = 1;
}
if (filament_seq == 1)
{
if (st_message == 0)
{
lcdDrawUpdate = 2;
lcd_implementation_message0(PSTR("Introducir el nuevo"));
lcd_implementation_message1(PSTR("filamento y girar el "));
lcd_implementation_message2(PSTR("boton hasta que"));
lcd_implementation_message3(PSTR("salga el filamento"));
if (encoder_zero == 0)
{
encoderPosition = 0;
encoder_zero = 1;
}
}
if (encoderPosition != 0)
{
move_menu_scale = 1.0;
current_position[E_AXIS] += float((int)encoderPosition) * move_menu_scale;
encoderPosition = 0;
#ifdef DELTA
calculate_delta(current_position);
plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS], manual_feedrate[E_AXIS]/60, active_extruder);
#else
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[E_AXIS]/60, active_extruder);
#endif
lcdDrawUpdate = 2;
st_message = 1;
}
if ((lcdDrawUpdate) && (st_message == 1))
{
lcd_implementation_drawedit(PSTR("Extruder"), ftostr31(current_position[E_AXIS]));
}
}
else
{
lcd_implementation_message4(PSTR(" Calentando..."));
_draw_heater_status(6, 0);
lcdDrawUpdate = 1;
u8g.drawBitmapP(9,1,STATUS_SCREENBYTEWIDTH,STATUS_SCREENHEIGHT, (blink % 2) && fanSpeed ? status_screen0_bmp : status_screen1_bmp);
}
if ((LCD_CLICKED) || (degTargetHotend(0) == 0) || (currentMenu == lcd_status_screen))
{
filament_seq = 0;
st_message = 0;
pausa_display = 0;
encoder_zero = 0;
setTargetHotend0(0);
lcd_return_to_status();
}
}
void lcd_update() {
if (!NextionON) return;
nexLoop(nex_listen_list);
millis_t ms = millis();
if (ms > next_lcd_update_ms) {
sendCurrentPageId(&NextionPage);
if (NextionPage == 1) {
if (fanSpeed > 0) fantimer.enable();
else fantimer.disable();
uint32_t temp_feedrate = 0;
VSpeed.getValue(&temp_feedrate);
feedrate_multiplier = (int)temp_feedrate;
#if HAS(TEMP_0)
temptoLCD(0, degHotend(0), degTargetHotend(0));
#endif
#if HAS(TEMP_1)
temptoLCD(1, degHotend(1), degTargetHotend(1));
#endif
#if HAS(TEMP_2)
temptoLCD(2, degHotend(2), degTargetHotend(2));
#elif HAS(TEMP_BED)
temptoLCD(2, degBed(), degTargetBed());
#endif
coordtoLCD();
#if ENABLED(SDSUPPORT)
if (card.isFileOpen()) {
if (SDstatus != 2) {
SDstatus = 2;
SD.setValue(2);
NPlay.setShow();
NStop.setShow();
}
if(IS_SD_PRINTING) {
// Progress bar solid part
sdbar.setValue(card.percentDone());
NPlay.setPic(17);
// Estimate End Time
uint16_t time = print_job_timer.duration() / 60;
uint16_t end_time = (time * (100 - card.percentDone())) / card.percentDone();
if (end_time > (60 * 23)) {
lcd_setstatus("End --:--");
}
else if (end_time >= 0) {
char temp[30];
sprintf_P(temp, PSTR("End %i:%i"), end_time / 60, end_time%60);
lcd_setstatus(temp);
}
}
else {
NPlay.setPic(16);
}
}
else if (card.cardOK && SDstatus != 1) {
SDstatus = 1;
SD.setValue(1);
MSD1.setShow();
NPlay.setHide();
NStop.setHide();
}
else if (!card.cardOK && SDstatus != 0) {
SDstatus = 0;
SD.setValue(0);
MSD1.setHide();
NPlay.setHide();
NStop.setHide();
}
#endif
}
else if (NextionPage == 6) {
coordtoLCD();
}
next_lcd_update_ms = ms + LCD_UPDATE_INTERVAL;
}
}
