// --------------------------------------------------------------------------------------------
MStatus polyModifierCmd::createModifierNode( MObject& modifierNode )
// --------------------------------------------------------------------------------------------
{
MStatus status = MS::kFailure;
if( fModifierNodeTypeInitialized || fModifierNodeNameInitialized )
{
if( fModifierNodeTypeInitialized )
{
modifierNode = fDGModifier.MDGModifier::createNode( fModifierNodeType, &status );
myModifierNode = modifierNode;
}
else if( fModifierNodeNameInitialized )
{
modifierNode = fDGModifier.MDGModifier::createNode( fModifierNodeName, &status );
}
// Check to make sure that we have a modifier node of the appropriate type.
// Requires an inMesh and outMesh attribute.
//
MFnDependencyNode depNodeFn( modifierNode );
MObject inMeshAttr;
MObject outMeshAttr;
inMeshAttr = depNodeFn.attribute( "inMesh" );
outMeshAttr = depNodeFn.attribute( "outMesh" );
if( inMeshAttr.isNull() || outMeshAttr.isNull() )
{
displayError( "Invalid Modifier Node: inMesh and outMesh attributes are required." );
status = MS::kFailure;
}
}
return status;
}
MStatus meshOp::initModifierNode( MObject modifierNode )
{
MStatus status;
// We need to tell the meshOp node which components to operate on.
// By overriding, the polyModifierCmd::initModifierNode() method,
// we can insert our own modifierNode initialization code.
//
MFnDependencyNode depNodeFn( modifierNode );
MObject cpListAttr = depNodeFn.attribute( "inputComponents" );
// Pass the component list down to the meshOp node
//
MPlug cpListPlug( modifierNode, cpListAttr );
status = cpListPlug.setValue( fComponentList );
if (status != MS::kSuccess) return status;
// Similarly for the operation type
//
MObject opTypeAttr = depNodeFn.attribute( "operationType" );
MPlug opTypePlug( modifierNode, opTypeAttr );
status = opTypePlug.setValue( fOperation );
return status;
}
// --------------------------------------------------------------------------------------------
MStatus polyModifierCmd::redoModifyPoly()
// --------------------------------------------------------------------------------------------
{
MStatus status = MS::kSuccess;
if( !fHasHistory && !fHasRecordHistory )
{
MObject meshNode = fDagPath.node();
// Call the directModifier - No need to pre-process the mesh data again
// since we already have it.
//
status = directModifier( meshNode );
}
else
{
// Call the redo on the DG and DAG modifiers
//
if( !fHasHistory )
{
//fDagModifier.doIt();
createDuplicate.doIt();
reparentDuplicate.doIt();
deleteDuplicate.doIt();
//We can simply redo the operation without having to feed in a meshe into the duplicated shape
}
//if(speedupTweakProcessing() || fHasHistory)
if(fHasHistory)
deleteTweaks();
status = fDGModifier.doIt();
if(createAnimCurves)
{
createSlideAnim.doIt();
}
//select the BPTNode again
MFnDependencyNode depNodeFn(myMeshPath.node());
MPlugArray connections;
depNodeFn.findPlug("inMesh").connectedTo(connections,true, false);
//it defintely has history
MObject conObj = connections[0].node();
MGlobal::select(conObj);
// Da das modifierNodeHandle im letzten Undo gekillt wurde, regenerieren wir diese wieder fuer die nchste benutzung
myModifierNode = conObj;
}
return status;
}
MPxNodeExporter* NodeExporterFactory::createMPxNodeExporter(
const MObject& object,
asr::Project& project,
AppleseedSession::SessionMode sessionMode)
{
MFnDependencyNode depNodeFn(object);
CreateMPxExporterMapType::const_iterator it = gMPxNodeExporters.find(depNodeFn.typeName());
if(it == gMPxNodeExporters.end())
{
//throw NoExporterForNode();
return 0;
}
return it->second(object, project, sessionMode);
}
//---------------------------------------------
void nodeRemovedCB(MObject& node, void* data)
//---------------------------------------------
{
//ptr umwandeln
softTransformationToolCtx * ctxPtr = (softTransformationToolCtx*) data;
if(ctxPtr->lastMesh.node() == node)
{
MPRINT("WARNUNG - MESH geloescht")
ctxPtr->emergency = true;
MGlobal::executeCommand("setToolTo selectSuperContext", false, false);
}
INVIS(MFnDependencyNode depNodeFn(node);)
//-------------------------------------------------
MDagPath moveManip::findMeshPath(const MObject& node) const
//-------------------------------------------------
{
MFnDependencyNode depNodeFn(node);
MPlugArray plugArray;
depNodeFn.findPlug("outMesh").connectedTo(plugArray,false, true);
MFnDagNode dagNodeFn(plugArray[0].node());
MDagPath path;
dagNodeFn.getPath(path);
return path;
}
MStatus tm_polySlot::initModifierNode( MObject modifierNode )
{
MStatus status;
// We need to tell the tm_polySlot node which UVs to operate on. By overriding
// the polyModifierCmd::initModifierNode() method, we can insert our own
// modifierNode initialization code.
//
MFnDependencyNode depNodeFn( modifierNode );
MObject edgesListAttr;
edgesListAttr = depNodeFn.attribute( "inputComponents" );
// Pass the component list down to the tm_polySlot node
//
MPlug edgesListPlug( modifierNode, edgesListAttr );
status = edgesListPlug.setValue( fComponentList );
return status;
}
MStatus tm_polySplit::initModifierNode( MObject modifierNode )
{
// We need to tell the tm_polySplit node which UVs to operate on. By overriding
// the polyModifierCmd::initModifierNode() method, we can insert our own
// modifierNode initialization code.
//
MFnDependencyNode depNodeFn( modifierNode );
MObject attrObj;
attrObj = depNodeFn.attribute( "inputComponents" );
MPlug plug( modifierNode, attrObj );
plug.setValue( fComponentList );
#ifdef _DEBUG
cout << endl << "tm_polySplit::initModifierNode : splitAlgorithm=";
cout<<cmd_flag_sel<<" loopMode="<<cmd_flag_loop_mode<<" loop_angle="<<cmd_flag_loop_angle<<" loop_maxcount="<<cmd_flag_loop_maxcount<<endl;
#endif
if( cmd_flag_loop)
{
attrObj = depNodeFn.attribute( "splitAlgorithm");
plug.setAttribute( attrObj);
plug.setValue( 0);
attrObj = depNodeFn.attribute( "loopMode");
plug.setAttribute( attrObj);
plug.setValue( cmd_flag_loop_mode);
attrObj = depNodeFn.attribute( "loopAngle");
plug.setAttribute( attrObj);
plug.setValue( cmd_flag_loop_angle);
attrObj = depNodeFn.attribute( "loopMaxCount");
plug.setAttribute( attrObj);
plug.setValue( cmd_flag_loop_maxcount);
}
else
{
attrObj = depNodeFn.attribute( "splitAlgorithm");
plug.setAttribute( attrObj);
plug.setValue( 1);
}
return MStatus::kSuccess;
}
//----------------------------------------------------------------------------
MStatus BPT_InsertVtx::compute(const MPlug& plug, MDataBlock& data)
//----------------------------------------------------------------------------
{
// FactoryWerte setzen
// (hier ueueberall eventuell noch MCheck nutzen fueuer Debug wenn nueuetig)
MStatus status;
MDataHandle stateHandle = data.outputValue(state);
if(stateHandle.asShort() == 1)
{
MDataHandle inMeshHandle = data.inputValue(IVinMesh);
MDataHandle outMeshHandle = data.outputValue(IVoutMesh);
// inMesh direkt an outMesh und MObject mesh an factory geben
outMeshHandle.set(inMeshHandle.asMesh());
outMeshHandle.setClean();
}
else
{
if( (plug == IVoutMesh) )
{
if(meshDirty)
{
MPRINT("COMPLETE COMPUTE!!!!!!!!!!!!!!!!!!!!!!!!!!!")
status = doCompleteCompute(data);
INVIS(cout<<"MeshDirty ist "<<meshDirty<<endl;)
meshDirty = false;
INVIS(cout<<"--------------------------------"<<endl;)
MFnDependencyNode depNodeFn(thisMObject());
INVIS(cout<<"---------------"<<endl;)
INVIS(cout<<depNodeFn.name().asChar()<<endl;)
// This method returns false if the given dagPath should be ignored and
// its subgraph should be pruned from the traversal. Otherwise, it returns true.
bool usdWriteJob::createPrimWriter(
MDagPath &curDag, MayaPrimWriterPtr* primWriterOut)
{
MObject ob = curDag.node();
// NOTE: Already skipping all intermediate objects
// skip all intermediate nodes (and their children)
if (PxrUsdMayaUtil::isIntermediate(ob))
{
*primWriterOut = nullptr;
return false;
}
// skip nodes that aren't renderable (and their children)
if (mArgs.excludeInvisible && !PxrUsdMayaUtil::isRenderable(ob))
{
*primWriterOut = nullptr;
return false;
}
// Check whether a user prim writer exists for the node first, since plugin
// nodes may provide the same function sets as native Maya nodes. If a
// writer can't be found, we'll fall back on the standard writers below.
if (ob.hasFn(MFn::kPluginDependNode) && ob.hasFn(MFn::kDagNode) && ob.hasFn(MFn::kDependencyNode)) {
MFnDependencyNode depNodeFn(ob);
MPxNode *pxNode = depNodeFn.userNode();
std::string mayaTypeName(pxNode->typeName().asChar());
if (PxrUsdMayaPrimWriterRegistry::WriterFactoryFn primWriterFactory =
PxrUsdMayaPrimWriterRegistry::Find(mayaTypeName)) {
MayaPrimWriterPtr primPtr(primWriterFactory(curDag, mStage, mArgs));
if (primPtr && primPtr->isValid()) {
// We found a registered user prim writer that handles this node
// type, so return now.
*primWriterOut = primPtr;
return true;
}
}
}
if (ob.hasFn(MFn::kTransform) || ob.hasFn(MFn::kLocator)) {
MayaTransformWriterPtr primPtr(new MayaTransformWriter(curDag, mStage, mArgs));
if (primPtr->isValid() ) {
*primWriterOut = primPtr;
return true;
}
}
else if (ob.hasFn(MFn::kMesh)) {
MayaMeshWriterPtr primPtr(new MayaMeshWriter(curDag, mStage, mArgs));
if (primPtr->isValid() ) {
*primWriterOut = primPtr;
return true;
}
}
else if (ob.hasFn(MFn::kNurbsCurve)) {
MayaNurbsCurveWriterPtr primPtr(new MayaNurbsCurveWriter(curDag, mStage, mArgs));
if (primPtr->isValid() ) {
*primWriterOut = primPtr;
return true;
}
}
else if (ob.hasFn(MFn::kNurbsSurface)) {
MayaNurbsSurfaceWriterPtr primPtr(new MayaNurbsSurfaceWriter(curDag, mStage, mArgs));
if (primPtr->isValid() ) {
*primWriterOut = primPtr;
return true;
}
}
else if (ob.hasFn(MFn::kCamera)) {
if (!mArgs.exportDefaultCameras) {
// Ignore default cameras
MString fullPathName = curDag.fullPathName();
if (fullPathName == "|persp|perspShape" ||
fullPathName == "|top|topShape" ||
fullPathName == "|front|frontShape" ||
fullPathName == "|side|sideShape") {
*primWriterOut = nullptr;
return false;
}
}
MayaCameraWriterPtr primPtr(new MayaCameraWriter(curDag, mStage, mArgs));
if (primPtr->isValid() ) {
*primWriterOut = primPtr;
return true;
}
}
*primWriterOut = nullptr;
return true;
}
//-----------------------------------------------------------------
MStatus ByronsPolyTools::doIt(const MArgList& args)
//-----------------------------------------------------------------
{
// Ist die version abgelaufen ?
//
#ifdef EXPIRES
if( ! checkExpires() )
{
MGlobal::displayError( "This AlphaVersion is expired. Scenes will still load properly. " );
return MS::kSuccess;
}
#endif
MSelectionList sList;
MStatus status;
MArgDatabase argData(syntax(),args);
if(argData.isFlagSet("-help"))
{
MGlobal::executeCommand("showBPTHelpWindow",false,false);
return MS::kSuccess;
}
//SELECTION UEBERPRUEFEN
// Selection holen
//
argData.getObjects(sList);
// OrigList fuer UndoZwecke speichern
origList = sList;
// Check, ob ueberhaupt Objekt gewaehlt
if ( (sList.length() == 0) )
{
displayError("ONE mesh or its transform node must be selected.");
return MStatus::kFailure;
}
//MDagPath meshDagPath;
MItSelectionList sIter(sList);//,MFn::kMesh);
bool meshOK = false,hasComps = false;
INVIS(cout<<"SELECTIONLIST LAENGE: "<<sList.length()<<endl);
for(; !sIter.isDone(); sIter.next())
{
sIter.getDagPath(meshDagPath, components);
//sList.getDagPath(0, meshDagPath, components);
//if(!meshDagPath.hasFn(MFn::kPluginDependNode))
if(meshDagPath.apiType() == (MFn::kMesh))
{
if(!meshDagPath.hasFn(MFn::kMesh) )
meshOK = false;
else
meshOK = true;
if( components.apiType() == MFn::kInvalid )
hasComps = false;
else
{
hasComps = true;
break;
}
}
}
if(!meshOK)
{
displayError("Invalid type! Only a mesh or its transform with selected components can be specified!");
return MStatus::kFailure;
}
#ifdef DEMO
MFnMesh meshFn(meshDagPath);
if(meshFn.numPolygons() > 500)
{
MGlobal::displayError("This DEMO will only work on meshes with a maximum number of 500 polygons");
return MS::kFailure;
}
#endif
if(!hasComps)
{
displayError("Please select some components to operate on");
return MStatus::kFailure;
}
// Flags und Argumente Holen
//----------------------------------
if(argData.isFlagSet("-iv"))
operationMode = 0;
else
operationMode = 1;
//zuerst mal edgeComoponents holen - wenn welche vorhanden und -peb flag gesetzt, dann wird auf jeden Fall der case 0 mode verwendet
getEdgeComponents(sList);
if( argData.isFlagSet("-peb") && edgeIDs.length() != 0 )
operationMode = 0;
//------------------------------------
// OPTIONS
//------------------------------------
switch(operationMode)
{
case 0://insert Vtx mode
{
if(argData.isFlagSet("-ic"))
argData.getFlagArgument("-ic",0,initialCount);
else
initialCount = 1;
goto default_values;
}
case 1: //PolyToolsMode
{
//------------------------------------
// FLAGS
//------------------------------------
smartSplitFlagSet = argData.isFlagSet("-smartSplit");
edgeLoopFlagSet = argData.isFlagSet("-edgeLoop");
edgeRingFlagSet = argData.isFlagSet("-edgeRing");
boundaryFlagSet = argData.isFlagSet("-boundary");
chamferFlagSet = argData.isFlagSet("-chamfer");
solidChamferFlagSet = argData.isFlagSet("-solidChamfer");
smcFlagSet = argData.isFlagSet("-smartMoveComponent");
growFlagSet = argData.isFlagSet("-gro");
schrinkFlagSet = argData.isFlagSet("-shr");
// abbruch, wenn flags nicht eindeutig und actionMode nicht gesetzt werden kann
status = setActionMode();
if(status == MS::kFailure)
return status;
//-------------------ENDE-----------------------------
goto default_values;
}
default:
{
default_values:
avt = (argData.isFlagSet("-avf"))?true:false;
avm = (argData.isFlagSet("-avm"))?true:false;
options.setLength(10);
options[0] = argData.isFlagSet("-connectEnds");
options[1] = argData.isFlagSet("-triangulateEnds");
if(argData.isFlagSet("-maxEdgeCount"))
argData.getFlagArgument("-maxEdgeCount",0,options[2]);
else
options[2] = 16666666;
options[3] = 0; //side ist standardmaessig 0:
if(argData.isFlagSet("-snl") )
options[4] = 1;
else
options[4] = 0;
options[5] = (argData.isFlagSet("-ast"))?1:0;
options[6] = 0;
if(argData.isFlagSet("-se"))
options[6] = 1;
if( CMDactionMode == 5 && argData.isFlagSet("-") )
options[6] += 3;
if(argData.isFlagSet("-sf"))
options[6] = 2;
if(argData.isFlagSet("-sv"))
options[6] = 5;
//IV flag - wenn -peb aktiv ist, wird er auf jeden Fall gesetzt
if( argData.isFlagSet("-peb") )
options[9] = 1;
else
options[9] = argData.isFlagSet("-civ")?true:false;
//----------------------------------------OPTIONS ENDE
slideIsRelative = argData.isFlagSet("-sir");
//slideIsRelative ist an, wenn Chamfer aktiv ist
if(chamferFlagSet+solidChamferFlagSet > 0)
slideIsRelative = 1;
if(CMDactionMode == 6)
slideIsRelative = true;
normalIsRelative = argData.isFlagSet("-nir");
//slide soll automatisch auf gesetzt werden, wenn -peb aktiv (dies entspricht einem slidewert von 1
if( argData.isFlagSet("-peb") && edgeIDs.length() != 0)
directSlide = 1;
else
{
if(argData.isFlagSet("-slide"))
argData.getFlagArgument("-slide",0,directSlide);
else
directSlide = 0.5; //defaultValue
}
}
}
//undoIndo sammeln
MSelectionMask tmpMask(MGlobal::componentSelectionMask());
undoMask = tmpMask;
/*
CallWindowProc( (WNDPROC)(GetWindowLong(mayaWin, GWL_WNDPROC)),
mayaWin, WM_CLOSE, NULL, NULL);
DWORD dwStyle = WS_CHILD | WS_CLIPSIBLINGS | WS_CLIPCHILDREN;
//MessageBox(mayaWin, "Help", "Whatever", MB_OK);
HWND myWin = CreateWindowEx( 0,"MyFirstWin","Lala" , dwStyle, 0, 0,
300, 400,
mayaWin, NULL, NULL, NULL);
ShowWindow(myWin, SW_SHOWNORMAL);
SetFocus(myWin);
UpdateWindow(myWin);
*/
//checken ob makeHistory aus ist. Wenn ja, dann wieder an machen, weil maya sonst crashed
int result;
MGlobal::executeCommand( "constructionHistory -q -tgl", result );
if(!result)
MGlobal::executeCommand( "constructionHistory -tgl 1",false,false);
meshDagPath.extendToShape();
// Mesh von polyModifierCommand setzen
setMeshNode(meshDagPath);
switch(operationMode)
{
case 0:
{
//getEdgeComponents(sList);
convertToEdges(sList, argData.isFlagSet("-peb") );
// setCreateAnimCurves(false);//damit nicht versucht wird, auf dieser Node animCurves fuer tweak zu erstellen
// Jetzt sind tweaks vonnten
setModifierNodeType( BPT_InsertVtx::IVid );
break;
}
case 1:
{
// Komponenten herausfiltern und IntIDArrays schreiben
//getEdgeComponents(sList);
getVertComponents(sList);
getPolyComponents(sList);
setModifierNodeType( ByronsPolyToolsNode::id );
break;
}
}
// Aktion ausfuehren
if(CMDactionMode == 0 || CMDactionMode == 4 || CMDactionMode == 5 || CMDactionMode == 6 || operationMode == 0)
{
MGlobal::executeCommand("setToolTo selectSuperContext",false,false);
status = doModifyPoly();
MFnDependencyNode depNodeFn(bptNode);
setResult(depNodeFn.name());
if( !(status == MS::kSuccess) )
{
MGlobal::displayError( "An error occoured." );
MGlobal::displayError( status.errorString() );
}
}
else
{
// Wenn mesh nicht veraendert wird, wird einfach so die Factory gerufen
directModifier(meshDagPath.node());
//setResult( "BPTOperation succeeded" );
}
//Command wird nur einmal verwendet, also muessen die Datenarrays auch m#keinen Speicher mehr verschwenden
//.clear() wuerde sie nicht physisch loeschen
polyIDs.setLength(0);
edgeIDs.setLength(0);
vertIDs.setLength(0);
// return status;
return MS::kSuccess;
}
// --------------------------------------------------------------------------------------------
MStatus polyModifierCmd::doModifyPoly()
// --------------------------------------------------------------------------------------------
{
MStatus status = MS::kFailure;
if( isCommandDataValid() )
{
// Get the state of the polyMesh
//
collectNodeState();
if( !fHasHistory && !fHasRecordHistory )
{
MObject meshNode = fDagPath.node();
// Pre-process the mesh - Cache old mesh (including tweaks, if applicable)
//
cacheMeshData();
cacheMeshTweaks();
// Call the directModifier
//
status = directModifier( meshNode );
}
else
{
MObject modifierNode;
createModifierNode( modifierNode );
initModifierNode( modifierNode );
status = connectNodes( modifierNode );
MFnDependencyNode depNodeFn(modifierNode);
MString newName;
getModifierUINodeName(newName);
depNodeFn.setName(newName);
//jetzt noch die customAttributes nonKeyable machen
//koennte zu fehlern führen bei undo und redo ->tuts aber nicht :)
if(createAnimCurves)
{//diese Attribute koennen nur gesetzt werden, wenn eine BPTNode erstellt wird
depNodeFn.findPlug("customSlFalloff").setKeyable(false);
}
// Selection vorher frei machen, weil unter umstnden noch eine parameter gewhlt war, welcher
// dann verhindert, dass die Channelbox den neuen anzeigt
//
MGlobal::clearSelectionList();
//jetzt die Node auf die SelectionList setzen/hinzufügen
MGlobal::select(modifierNode);
}
}
return status;
}
MPlug boingRbCmd::nameToNodePlug( MString attrName, MObject nodeObject ) {
MFnDependencyNode depNodeFn( nodeObject );
MObject attrObject = depNodeFn.attribute( attrName );
MPlug plug( nodeObject, attrObject );
return plug;
}
void ShadingNetworkExporter::createShader(const MObject& node)
{
MStatus status;
MFnDependencyNode depNodeFn(node);
const OSLShaderInfo *shaderInfo =
ShadingNodeRegistry::getShaderInfo(depNodeFn.typeName());
if(!shaderInfo)
{
std::cout << "Skipping unsupported shader: " << depNodeFn.typeName() << "\n";
return;
}
if(m_shadersExported.count(depNodeFn.name()) != 0)
{
std::cout << "Skipping already exported shader: " << depNodeFn.name() << "\n";
return;
}
m_shadersExported.insert(depNodeFn.name());
asr::ParamArray shaderParams;
for(int i = 0, e = shaderInfo->paramInfo.size(); i < e; ++i)
{
const OSLParamInfo& paramInfo = shaderInfo->paramInfo[i];
// Skip output attributes.
if(paramInfo.isOutput)
{
std::cout << "Skipping output attribute: " << "\n";
std::cout << paramInfo << std::endl;
continue;
}
if(!paramInfo.validDefault)
{
std::cout << "Skipping attribute without valid default: " << "\n";
std::cout << paramInfo << std::endl;
continue;
}
if(paramInfo.isArray)
{
std::cout << "Skipping array attribute: " << "\n";
std::cout << paramInfo << std::endl;
continue;
}
MPlug plug = depNodeFn.findPlug(paramInfo.mayaAttributeName, &status);
if(!status)
{
std::cout << "Skipping unknown attribute: "
<< paramInfo.mayaAttributeName << std::endl;
continue;
}
if(plug.isConnected())
{
MObject srcNode;
if(AttributeUtils::get(plug, srcNode))
createShader(srcNode);
continue;
}
if(plug.isCompound() && plug.numConnectedChildren() != 0)
{
std::cout << "Skipping connected compound attribute: " << plug.name() << "\n";
continue;
}
if(plug.isArray() && plug.numConnectedElements() != 0)
{
std::cout << "Skipping connected array attribute: " << plug.name() << "\n";
continue;
}
processAttribute(plug, paramInfo, shaderParams);
}
m_shaderGroup->add_shader(
shaderInfo->shaderType.asChar(),
shaderInfo->shaderName.asChar(),
depNodeFn.name().asChar(),
shaderParams);
}
void ShadingNetworkExporter::addConnections(const MObject& node)
{
MStatus status;
MFnDependencyNode depNodeFn(node);
const OSLShaderInfo *shaderInfo =
ShadingNodeRegistry::getShaderInfo(depNodeFn.typeName());
if(!shaderInfo)
{
std::cout << "Skipping unsupported shader: " << depNodeFn.typeName() << "\n";
return;
}
if(m_shadersExported.count(depNodeFn.name()) != 0)
{
std::cout << "Skipping already exported shader: " << depNodeFn.name() << "\n";
return;
}
m_shadersExported.insert(depNodeFn.name());
for(int i = 0, e = shaderInfo->paramInfo.size(); i < e; ++i)
{
const OSLParamInfo& paramInfo = shaderInfo->paramInfo[i];
// Skip output attributes.
if(paramInfo.isOutput)
continue;
MPlug plug = depNodeFn.findPlug(paramInfo.mayaAttributeName, &status);
if(!status)
{
std::cout << "Skipping unknown attribute: "
<< paramInfo.mayaAttributeName << std::endl;
continue;
}
if(plug.isConnected())
{
MPlug srcPlug;
if(AttributeUtils::getPlugConnectedTo(plug, srcPlug))
{
MFnDependencyNode srcDepNodeFn(srcPlug.node());
const OSLShaderInfo *srcShaderInfo =
ShadingNodeRegistry::getShaderInfo(srcDepNodeFn.typeName());
if(!srcShaderInfo)
continue;
if(const OSLParamInfo *srcParamInfo = srcShaderInfo->findParam(srcPlug.name()))
{
m_shaderGroup->add_connection(
srcDepNodeFn.name().asChar(),
srcParamInfo->paramName.asChar(),
depNodeFn.name().asChar(),
paramInfo.paramName.asChar());
}
addConnections(srcPlug.node());
}
}
if(plug.isCompound() && plug.numConnectedChildren() != 0)
{
// ???
}
if(plug.isArray() && plug.numConnectedElements() != 0)
{
// ???
}
}
}
