const gchar *g_module_check_init(GModule *module)
{
(void)module;
/* Get initial state of datapipes */
call_state = datapipe_get_gint(call_state_pipe);
alarm_ui_state = datapipe_get_gint(alarm_ui_state_pipe);
display_state = display_state_get();
submode = datapipe_get_gint(submode_pipe);
/* Append triggers/filters to datapipes */
append_input_trigger_to_datapipe(&call_state_pipe,
call_state_trigger);
append_input_trigger_to_datapipe(&alarm_ui_state_pipe,
alarm_ui_state_trigger);
append_output_trigger_to_datapipe(&display_state_pipe,
display_state_trigger);
append_output_trigger_to_datapipe(&submode_pipe,
submode_trigger);
/* PS enabled setting */
mce_gconf_notifier_add(MCE_GCONF_PROXIMITY_PATH,
MCE_GCONF_PROXIMITY_PS_ENABLED_PATH,
use_ps_conf_cb,
&use_ps_conf_id);
mce_gconf_get_bool(MCE_GCONF_PROXIMITY_PS_ENABLED_PATH,
&use_ps_conf_value);
/* enable/disable sensor based on initial conditions */
update_proximity_monitor();
return NULL;
}
const gchar *g_module_check_init(GModule *module)
{
(void)module;
/* Get initial state of datapipes */
call_state = datapipe_get_gint(call_state_pipe);
alarm_ui_state = datapipe_get_gint(alarm_ui_state_pipe);
display_state = display_state_get();
submode = datapipe_get_gint(submode_pipe);
/* Append triggers/filters to datapipes */
append_input_trigger_to_datapipe(&call_state_pipe,
call_state_trigger);
append_input_trigger_to_datapipe(&alarm_ui_state_pipe,
alarm_ui_state_trigger);
append_output_trigger_to_datapipe(&display_state_pipe,
display_state_trigger);
append_output_trigger_to_datapipe(&submode_pipe,
submode_trigger);
/* PS enabled setting */
mce_setting_track_bool(MCE_SETTING_PROXIMITY_PS_ENABLED,
&use_ps_conf_value,
MCE_DEFAULT_PROXIMITY_PS_ENABLED,
use_ps_conf_cb,
&use_ps_conf_id);
/* PS acts as LID sensor */
mce_setting_track_bool(MCE_SETTING_PROXIMITY_PS_ACTS_AS_LID,
&ps_acts_as_lid,
MCE_DEFAULT_PROXIMITY_PS_ACTS_AS_LID,
use_ps_conf_cb,
&ps_acts_as_lid_conf_id);
/* If the proximity sensor input is used for toggling
* lid state, we must take care not to leave proximity
* tracking to covered state. */
if( ps_acts_as_lid )
report_proximity(COVER_OPEN);
/* enable/disable sensor based on initial conditions */
update_proximity_monitor();
return NULL;
}
/** Install datapipe triggers/filters
*/
static void fba_datapipe_init(void)
{
/* Get intial display state */
display_state = display_state_get();
/* Append triggers/filters to datapipes */
append_filter_to_datapipe(&display_brightness_pipe,
display_brightness_filter);
append_filter_to_datapipe(&led_brightness_pipe,
led_brightness_filter);
append_filter_to_datapipe(&lpm_brightness_pipe,
lpm_brightness_filter);
append_filter_to_datapipe(&key_backlight_pipe,
key_backlight_filter);
append_output_trigger_to_datapipe(&display_state_next_pipe,
display_state_next_trigger);
append_output_trigger_to_datapipe(&display_state_pipe,
display_state_trigger);
}
/**
* Datapipe filter for inactivity
*
* @param data The unfiltered inactivity state;
* TRUE if the device is inactive,
* FALSE if the device is active
* @return The filtered inactivity state;
* TRUE if the device is inactive,
* FALSE if the device is active
*/
static gpointer device_inactive_filter(gpointer data)
{
static gboolean old_device_inactive = FALSE;
alarm_ui_state_t alarm_ui_state =
datapipe_get_gint(alarm_ui_state_pipe);
submode_t submode = mce_get_submode_int32();
cover_state_t proximity_state = proximity_state_get();
display_state_t display_state = display_state_get();
system_state_t system_state = datapipe_get_gint(system_state_pipe);
call_state_t call_state = datapipe_get_gint(call_state_pipe);
device_inactive = GPOINTER_TO_INT(data);
/* nothing to filter if we are already inactive */
if( device_inactive )
goto EXIT;
/* Never filter inactivity if display is in dimmed state.
*
* Whether we have arrived to dimmed state via expected or
* unexpected routes, the touch input is active and ui side
* event eater will ignore only the first event. If we do
* not allow activity (and turn on the display) we will get
* ui interaction in odd looking dimmed state that then gets
* abruptly ended by blanking timer.
*/
if( display_state == MCE_DISPLAY_DIM )
goto EXIT;
/* system state must be USER or ACT DEAD */
switch( system_state ) {
case MCE_STATE_USER:
case MCE_STATE_ACTDEAD:
break;
default:
mce_log(LL_DEBUG, "system_state != USER|ACTDEAD"
"; ignoring activity");
device_inactive = TRUE;
goto EXIT;
}
/* tklock must be off, or there must be alarms or calls */
if( submode & MCE_TKLOCK_SUBMODE ) {
gboolean have_alarms = FALSE;
gboolean have_calls = FALSE;
gboolean display_on = FALSE;
switch( alarm_ui_state ) {
case MCE_ALARM_UI_RINGING_INT32:
case MCE_ALARM_UI_VISIBLE_INT32:
have_alarms = TRUE;
break;
default:
break;
}
switch( call_state ) {
case CALL_STATE_RINGING:
case CALL_STATE_ACTIVE:
have_calls = TRUE;
default:
break;
}
if( display_state == MCE_DISPLAY_ON )
display_on = TRUE;
if( !display_on && !have_alarms && !have_calls ) {
mce_log(LL_DEBUG, "tklock enabled, no alarms or calls;"
" ignoring activity");
device_inactive = TRUE;
goto EXIT;
}
}
/* if proximity is covered, display must not be off */
if( proximity_state == COVER_CLOSED ) {
switch( display_state ) {
case MCE_DISPLAY_OFF:
case MCE_DISPLAY_LPM_OFF:
case MCE_DISPLAY_LPM_ON:
case MCE_DISPLAY_POWER_UP:
case MCE_DISPLAY_POWER_DOWN:
mce_log(LL_DEBUG, "display=off, proximity=covered; ignoring activity");
device_inactive = TRUE;
goto EXIT;
default:
case MCE_DISPLAY_UNDEF:
case MCE_DISPLAY_DIM:
case MCE_DISPLAY_ON:
break;
}
}
EXIT:
/* React to activity */
if( !device_inactive ) {
call_activity_callbacks();
setup_inactivity_timeout();
}
/* Handle inactivity state change */
if( old_device_inactive != device_inactive ) {
old_device_inactive = device_inactive;
send_inactivity_status(NULL);
}
/* Return filtered activity state */
return GINT_TO_POINTER(device_inactive);
}
