static void intel_fbc_schedule_activation(struct intel_crtc *crtc)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
struct intel_fbc *fbc = &dev_priv->fbc;
struct intel_fbc_work *work = &fbc->work;
WARN_ON(!mutex_is_locked(&fbc->lock));
if (WARN_ON(!fbc->enabled))
return;
if (drm_crtc_vblank_get(&crtc->base)) {
DRM_ERROR("vblank not available for FBC on pipe %c\n",
pipe_name(crtc->pipe));
return;
}
/* It is useless to call intel_fbc_cancel_work() or cancel_work() in
* this function since we're not releasing fbc.lock, so it won't have an
* opportunity to grab it to discover that it was cancelled. So we just
* update the expected jiffy count. */
work->scheduled = true;
work->scheduled_vblank = drm_crtc_vblank_count(&crtc->base);
drm_crtc_vblank_put(&crtc->base);
schedule_work(&work->work);
}
for_each_crtc_in_state(old_state, crtc, old_crtc_state, i) {
if (!old_crtc_state->enable)
continue;
rockchip_crtc_wait_for_update(crtc);
drm_crtc_vblank_put(crtc);
}
static void mdp4_crtc_commit(struct drm_crtc *crtc)
{
mdp4_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
crtc_flush(crtc);
/* drop the ref to mdp clk's that we got in prepare: */
mdp4_disable(get_kms(crtc));
drm_crtc_vblank_put(crtc);
}
static void intel_fbc_work_fn(struct work_struct *__work)
{
struct drm_i915_private *dev_priv =
container_of(__work, struct drm_i915_private, fbc.work.work);
struct intel_fbc *fbc = &dev_priv->fbc;
struct intel_fbc_work *work = &fbc->work;
struct intel_crtc *crtc = fbc->crtc;
struct drm_vblank_crtc *vblank = &dev_priv->dev->vblank[crtc->pipe];
if (drm_crtc_vblank_get(&crtc->base)) {
DRM_ERROR("vblank not available for FBC on pipe %c\n",
pipe_name(crtc->pipe));
mutex_lock(&fbc->lock);
work->scheduled = false;
mutex_unlock(&fbc->lock);
return;
}
retry:
/* Delay the actual enabling to let pageflipping cease and the
* display to settle before starting the compression. Note that
* this delay also serves a second purpose: it allows for a
* vblank to pass after disabling the FBC before we attempt
* to modify the control registers.
*
* WaFbcWaitForVBlankBeforeEnable:ilk,snb
*
* It is also worth mentioning that since work->scheduled_vblank can be
* updated multiple times by the other threads, hitting the timeout is
* not an error condition. We'll just end up hitting the "goto retry"
* case below.
*/
wait_event_timeout(vblank->queue,
drm_crtc_vblank_count(&crtc->base) != work->scheduled_vblank,
msecs_to_jiffies(50));
mutex_lock(&fbc->lock);
/* Were we cancelled? */
if (!work->scheduled)
goto out;
/* Were we delayed again while this function was sleeping? */
if (drm_crtc_vblank_count(&crtc->base) == work->scheduled_vblank) {
mutex_unlock(&fbc->lock);
goto retry;
}
intel_fbc_hw_activate(dev_priv);
work->scheduled = false;
out:
mutex_unlock(&fbc->lock);
drm_crtc_vblank_put(&crtc->base);
}
static void sun4i_tcon_finish_page_flip(struct drm_device *dev,
struct sun4i_crtc *scrtc)
{
unsigned long flags;
spin_lock_irqsave(&dev->event_lock, flags);
if (scrtc->event) {
drm_crtc_send_vblank_event(&scrtc->crtc, scrtc->event);
drm_crtc_vblank_put(&scrtc->crtc);
scrtc->event = NULL;
}
spin_unlock_irqrestore(&dev->event_lock, flags);
}
static void mdp4_complete_commit(struct msm_kms *kms, struct drm_atomic_state *state)
{
struct mdp4_kms *mdp4_kms = to_mdp4_kms(to_mdp_kms(kms));
int i;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
/* see 119ecb7fd */
for_each_new_crtc_in_state(state, crtc, crtc_state, i)
drm_crtc_vblank_put(crtc);
mdp4_disable(mdp4_kms);
}
void shmob_drm_crtc_finish_page_flip(struct shmob_drm_crtc *scrtc)
{
struct drm_pending_vblank_event *event;
struct drm_device *dev = scrtc->crtc.dev;
unsigned long flags;
spin_lock_irqsave(&dev->event_lock, flags);
event = scrtc->event;
scrtc->event = NULL;
if (event) {
drm_crtc_send_vblank_event(&scrtc->crtc, event);
drm_crtc_vblank_put(&scrtc->crtc);
}
spin_unlock_irqrestore(&dev->event_lock, flags);
}
static void mdp4_complete_commit(struct msm_kms *kms, struct drm_atomic_state *state)
{
struct mdp4_kms *mdp4_kms = to_mdp4_kms(to_mdp_kms(kms));
int i, ncrtcs = state->dev->mode_config.num_crtc;
/* see 119ecb7fd */
for (i = 0; i < ncrtcs; i++) {
struct drm_crtc *crtc = state->crtcs[i];
if (!crtc)
continue;
drm_crtc_vblank_put(crtc);
}
mdp4_disable(mdp4_kms);
}
static int dce_virtual_pageflip(struct amdgpu_device *adev,
unsigned crtc_id)
{
unsigned long flags;
struct amdgpu_crtc *amdgpu_crtc;
struct amdgpu_flip_work *works;
amdgpu_crtc = adev->mode_info.crtcs[crtc_id];
if (crtc_id >= adev->mode_info.num_crtc) {
DRM_ERROR("invalid pageflip crtc %d\n", crtc_id);
return -EINVAL;
}
/* IRQ could occur when in initial stage */
if (amdgpu_crtc == NULL)
return 0;
spin_lock_irqsave(&adev->ddev->event_lock, flags);
works = amdgpu_crtc->pflip_works;
if (amdgpu_crtc->pflip_status != AMDGPU_FLIP_SUBMITTED) {
DRM_DEBUG_DRIVER("amdgpu_crtc->pflip_status = %d != "
"AMDGPU_FLIP_SUBMITTED(%d)\n",
amdgpu_crtc->pflip_status,
AMDGPU_FLIP_SUBMITTED);
spin_unlock_irqrestore(&adev->ddev->event_lock, flags);
return 0;
}
/* page flip completed. clean up */
amdgpu_crtc->pflip_status = AMDGPU_FLIP_NONE;
amdgpu_crtc->pflip_works = NULL;
/* wakeup usersapce */
if (works->event)
drm_crtc_send_vblank_event(&amdgpu_crtc->base, works->event);
spin_unlock_irqrestore(&adev->ddev->event_lock, flags);
drm_crtc_vblank_put(&amdgpu_crtc->base);
schedule_work(&works->unpin_work);
return 0;
}
void rcar_du_crtc_cancel_page_flip(struct rcar_du_crtc *rcrtc,
struct drm_file *file)
{
struct drm_pending_vblank_event *event;
struct drm_device *dev = rcrtc->crtc.dev;
unsigned long flags;
/* Destroy the pending vertical blanking event associated with the
* pending page flip, if any, and disable vertical blanking interrupts.
*/
spin_lock_irqsave(&dev->event_lock, flags);
event = rcrtc->event;
if (event && event->base.file_priv == file) {
rcrtc->event = NULL;
event->base.destroy(&event->base);
drm_crtc_vblank_put(&rcrtc->crtc);
}
spin_unlock_irqrestore(&dev->event_lock, flags);
}
static void rcar_du_crtc_finish_page_flip(struct rcar_du_crtc *rcrtc)
{
struct drm_pending_vblank_event *event;
struct drm_device *dev = rcrtc->crtc.dev;
unsigned long flags;
spin_lock_irqsave(&dev->event_lock, flags);
event = rcrtc->event;
rcrtc->event = NULL;
spin_unlock_irqrestore(&dev->event_lock, flags);
if (event == NULL)
return;
spin_lock_irqsave(&dev->event_lock, flags);
drm_send_vblank_event(dev, rcrtc->index, event);
wake_up(&rcrtc->flip_wait);
spin_unlock_irqrestore(&dev->event_lock, flags);
drm_crtc_vblank_put(&rcrtc->crtc);
}
/**
* drm_primary_helper_update() - Helper for primary plane update
* @plane: plane object to update
* @crtc: owning CRTC of owning plane
* @fb: framebuffer to flip onto plane
* @crtc_x: x offset of primary plane on crtc
* @crtc_y: y offset of primary plane on crtc
* @crtc_w: width of primary plane rectangle on crtc
* @crtc_h: height of primary plane rectangle on crtc
* @src_x: x offset of @fb for panning
* @src_y: y offset of @fb for panning
* @src_w: width of source rectangle in @fb
* @src_h: height of source rectangle in @fb
*
* Provides a default plane update handler for primary planes. This is handler
* is called in response to a userspace SetPlane operation on the plane with a
* non-NULL framebuffer. We call the driver's modeset handler to update the
* framebuffer.
*
* SetPlane() on a primary plane of a disabled CRTC is not supported, and will
* return an error.
*
* Note that we make some assumptions about hardware limitations that may not be
* true for all hardware --
*
* 1. Primary plane cannot be repositioned.
* 2. Primary plane cannot be scaled.
* 3. Primary plane must cover the entire CRTC.
* 4. Subpixel positioning is not supported.
*
* Drivers for hardware that don't have these restrictions can provide their
* own implementation rather than using this helper.
*
* RETURNS:
* Zero on success, error code on failure
*/
int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
struct drm_framebuffer *fb,
int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t src_x, uint32_t src_y,
uint32_t src_w, uint32_t src_h)
{
struct drm_mode_set set = {
.crtc = crtc,
.fb = fb,
.mode = &crtc->mode,
.x = src_x >> 16,
.y = src_y >> 16,
};
struct drm_rect src = {
.x1 = src_x,
.y1 = src_y,
.x2 = src_x + src_w,
.y2 = src_y + src_h,
};
struct drm_rect dest = {
.x1 = crtc_x,
.y1 = crtc_y,
.x2 = crtc_x + crtc_w,
.y2 = crtc_y + crtc_h,
};
const struct drm_rect clip = {
.x2 = crtc->mode.hdisplay,
.y2 = crtc->mode.vdisplay,
};
struct drm_connector **connector_list;
int num_connectors, ret;
bool visible;
ret = drm_plane_helper_check_update(plane, crtc, fb,
&src, &dest, &clip,
BIT(DRM_ROTATE_0),
DRM_PLANE_HELPER_NO_SCALING,
DRM_PLANE_HELPER_NO_SCALING,
false, false, &visible);
if (ret)
return ret;
if (!visible)
/*
* Primary plane isn't visible. Note that unless a driver
* provides their own disable function, this will just
* wind up returning -EINVAL to userspace.
*/
return plane->funcs->disable_plane(plane);
/* Find current connectors for CRTC */
num_connectors = get_connectors_for_crtc(crtc, NULL, 0);
BUG_ON(num_connectors == 0);
connector_list = kzalloc(num_connectors * sizeof(*connector_list),
GFP_KERNEL);
if (!connector_list)
return -ENOMEM;
get_connectors_for_crtc(crtc, connector_list, num_connectors);
set.connectors = connector_list;
set.num_connectors = num_connectors;
/*
* We call set_config() directly here rather than using
* drm_mode_set_config_internal. We're reprogramming the same
* connectors that were already in use, so we shouldn't need the extra
* cross-CRTC fb refcounting to accomodate stealing connectors.
* drm_mode_setplane() already handles the basic refcounting for the
* framebuffers involved in this operation.
*/
ret = crtc->funcs->set_config(&set);
kfree(connector_list);
return ret;
}
EXPORT_SYMBOL(drm_primary_helper_update);
/**
* drm_primary_helper_disable() - Helper for primary plane disable
* @plane: plane to disable
*
* Provides a default plane disable handler for primary planes. This is handler
* is called in response to a userspace SetPlane operation on the plane with a
* NULL framebuffer parameter. It unconditionally fails the disable call with
* -EINVAL the only way to disable the primary plane without driver support is
* to disable the entier CRTC. Which does not match the plane ->disable hook.
*
* Note that some hardware may be able to disable the primary plane without
* disabling the whole CRTC. Drivers for such hardware should provide their
* own disable handler that disables just the primary plane (and they'll likely
* need to provide their own update handler as well to properly re-enable a
* disabled primary plane).
*
* RETURNS:
* Unconditionally returns -EINVAL.
*/
int drm_primary_helper_disable(struct drm_plane *plane)
{
return -EINVAL;
}
EXPORT_SYMBOL(drm_primary_helper_disable);
/**
* drm_primary_helper_destroy() - Helper for primary plane destruction
* @plane: plane to destroy
*
* Provides a default plane destroy handler for primary planes. This handler
* is called during CRTC destruction. We disable the primary plane, remove
* it from the DRM plane list, and deallocate the plane structure.
*/
void drm_primary_helper_destroy(struct drm_plane *plane)
{
drm_plane_cleanup(plane);
kfree(plane);
}
EXPORT_SYMBOL(drm_primary_helper_destroy);
const struct drm_plane_funcs drm_primary_helper_funcs = {
.update_plane = drm_primary_helper_update,
.disable_plane = drm_primary_helper_disable,
.destroy = drm_primary_helper_destroy,
};
EXPORT_SYMBOL(drm_primary_helper_funcs);
static struct drm_plane *create_primary_plane(struct drm_device *dev)
{
struct drm_plane *primary;
int ret;
primary = kzalloc(sizeof(*primary), GFP_KERNEL);
if (primary == NULL) {
DRM_DEBUG_KMS("Failed to allocate primary plane\n");
return NULL;
}
/*
* Remove the format_default field from drm_plane when dropping
* this helper.
*/
primary->format_default = true;
/* possible_crtc's will be filled in later by crtc_init */
ret = drm_universal_plane_init(dev, primary, 0,
&drm_primary_helper_funcs,
safe_modeset_formats,
ARRAY_SIZE(safe_modeset_formats),
DRM_PLANE_TYPE_PRIMARY, NULL);
if (ret) {
kfree(primary);
primary = NULL;
}
return primary;
}
/**
* drm_crtc_init - Legacy CRTC initialization function
* @dev: DRM device
* @crtc: CRTC object to init
* @funcs: callbacks for the new CRTC
*
* Initialize a CRTC object with a default helper-provided primary plane and no
* cursor plane.
*
* Returns:
* Zero on success, error code on failure.
*/
int drm_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
const struct drm_crtc_funcs *funcs)
{
struct drm_plane *primary;
primary = create_primary_plane(dev);
return drm_crtc_init_with_planes(dev, crtc, primary, NULL, funcs,
NULL);
}
EXPORT_SYMBOL(drm_crtc_init);
int drm_plane_helper_commit(struct drm_plane *plane,
struct drm_plane_state *plane_state,
struct drm_framebuffer *old_fb)
{
const struct drm_plane_helper_funcs *plane_funcs;
struct drm_crtc *crtc[2];
const struct drm_crtc_helper_funcs *crtc_funcs[2];
int i, ret = 0;
plane_funcs = plane->helper_private;
/* Since this is a transitional helper we can't assume that plane->state
* is always valid. Hence we need to use plane->crtc instead of
* plane->state->crtc as the old crtc. */
crtc[0] = plane->crtc;
crtc[1] = crtc[0] != plane_state->crtc ? plane_state->crtc : NULL;
for (i = 0; i < 2; i++)
crtc_funcs[i] = crtc[i] ? crtc[i]->helper_private : NULL;
if (plane_funcs->atomic_check) {
ret = plane_funcs->atomic_check(plane, plane_state);
if (ret)
goto out;
}
if (plane_funcs->prepare_fb && plane_state->fb &&
plane_state->fb != old_fb) {
ret = plane_funcs->prepare_fb(plane,
plane_state);
if (ret)
goto out;
}
/* Point of no return, commit sw state. */
swap(plane->state, plane_state);
for (i = 0; i < 2; i++) {
if (crtc_funcs[i] && crtc_funcs[i]->atomic_begin)
crtc_funcs[i]->atomic_begin(crtc[i], crtc[i]->state);
}
/*
* Drivers may optionally implement the ->atomic_disable callback, so
* special-case that here.
*/
if (drm_atomic_plane_disabling(plane, plane_state) &&
plane_funcs->atomic_disable)
plane_funcs->atomic_disable(plane, plane_state);
else
plane_funcs->atomic_update(plane, plane_state);
for (i = 0; i < 2; i++) {
if (crtc_funcs[i] && crtc_funcs[i]->atomic_flush)
crtc_funcs[i]->atomic_flush(crtc[i], crtc[i]->state);
}
/*
* If we only moved the plane and didn't change fb's, there's no need to
* wait for vblank.
*/
if (plane->state->fb == old_fb)
goto out;
for (i = 0; i < 2; i++) {
if (!crtc[i])
continue;
if (crtc[i]->cursor == plane)
continue;
/* There's no other way to figure out whether the crtc is running. */
ret = drm_crtc_vblank_get(crtc[i]);
if (ret == 0) {
drm_crtc_wait_one_vblank(crtc[i]);
drm_crtc_vblank_put(crtc[i]);
}
ret = 0;
}
if (plane_funcs->cleanup_fb)
plane_funcs->cleanup_fb(plane, plane_state);
out:
if (plane_state) {
if (plane->funcs->atomic_destroy_state)
plane->funcs->atomic_destroy_state(plane, plane_state);
else
drm_atomic_helper_plane_destroy_state(plane, plane_state);
}
return ret;
}
/**
* drm_plane_helper_update() - Transitional helper for plane update
* @plane: plane object to update
* @crtc: owning CRTC of owning plane
* @fb: framebuffer to flip onto plane
* @crtc_x: x offset of primary plane on crtc
* @crtc_y: y offset of primary plane on crtc
* @crtc_w: width of primary plane rectangle on crtc
* @crtc_h: height of primary plane rectangle on crtc
* @src_x: x offset of @fb for panning
* @src_y: y offset of @fb for panning
* @src_w: width of source rectangle in @fb
* @src_h: height of source rectangle in @fb
*
* Provides a default plane update handler using the atomic plane update
* functions. It is fully left to the driver to check plane constraints and
* handle corner-cases like a fully occluded or otherwise invisible plane.
*
* This is useful for piecewise transitioning of a driver to the atomic helpers.
*
* RETURNS:
* Zero on success, error code on failure
*/
int drm_plane_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
struct drm_framebuffer *fb,
int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t src_x, uint32_t src_y,
uint32_t src_w, uint32_t src_h)
{
struct drm_plane_state *plane_state;
if (plane->funcs->atomic_duplicate_state)
plane_state = plane->funcs->atomic_duplicate_state(plane);
else {
if (!plane->state)
drm_atomic_helper_plane_reset(plane);
plane_state = drm_atomic_helper_plane_duplicate_state(plane);
}
if (!plane_state)
return -ENOMEM;
plane_state->plane = plane;
plane_state->crtc = crtc;
drm_atomic_set_fb_for_plane(plane_state, fb);
plane_state->crtc_x = crtc_x;
plane_state->crtc_y = crtc_y;
plane_state->crtc_h = crtc_h;
plane_state->crtc_w = crtc_w;
plane_state->src_x = src_x;
plane_state->src_y = src_y;
plane_state->src_h = src_h;
plane_state->src_w = src_w;
return drm_plane_helper_commit(plane, plane_state, plane->fb);
}
EXPORT_SYMBOL(drm_plane_helper_update);
/**
* drm_plane_helper_disable() - Transitional helper for plane disable
* @plane: plane to disable
*
* Provides a default plane disable handler using the atomic plane update
* functions. It is fully left to the driver to check plane constraints and
* handle corner-cases like a fully occluded or otherwise invisible plane.
*
* This is useful for piecewise transitioning of a driver to the atomic helpers.
*
* RETURNS:
* Zero on success, error code on failure
*/
int drm_plane_helper_disable(struct drm_plane *plane)
{
struct drm_plane_state *plane_state;
/* crtc helpers love to call disable functions for already disabled hw
* functions. So cope with that. */
if (!plane->crtc)
return 0;
if (plane->funcs->atomic_duplicate_state)
plane_state = plane->funcs->atomic_duplicate_state(plane);
else {
if (!plane->state)
drm_atomic_helper_plane_reset(plane);
plane_state = drm_atomic_helper_plane_duplicate_state(plane);
}
if (!plane_state)
return -ENOMEM;
plane_state->plane = plane;
plane_state->crtc = NULL;
drm_atomic_set_fb_for_plane(plane_state, NULL);
return drm_plane_helper_commit(plane, plane_state, plane->fb);
}
EXPORT_SYMBOL(drm_plane_helper_disable);
static int drm_mode_cursor_universal(struct drm_crtc *crtc,
struct drm_mode_cursor2 *req,
struct drm_file *file_priv,
struct drm_modeset_acquire_ctx *ctx)
{
struct drm_device *dev = crtc->dev;
struct drm_plane *plane = crtc->cursor;
struct drm_framebuffer *fb = NULL;
struct drm_mode_fb_cmd2 fbreq = {
.width = req->width,
.height = req->height,
.pixel_format = DRM_FORMAT_ARGB8888,
.pitches = { req->width * 4 },
.handles = { req->handle },
};
int32_t crtc_x, crtc_y;
uint32_t crtc_w = 0, crtc_h = 0;
uint32_t src_w = 0, src_h = 0;
int ret = 0;
BUG_ON(!plane);
WARN_ON(plane->crtc != crtc && plane->crtc != NULL);
/*
* Obtain fb we'll be using (either new or existing) and take an extra
* reference to it if fb != null. setplane will take care of dropping
* the reference if the plane update fails.
*/
if (req->flags & DRM_MODE_CURSOR_BO) {
if (req->handle) {
fb = drm_internal_framebuffer_create(dev, &fbreq, file_priv);
if (IS_ERR(fb)) {
DRM_DEBUG_KMS("failed to wrap cursor buffer in drm framebuffer\n");
return PTR_ERR(fb);
}
fb->hot_x = req->hot_x;
fb->hot_y = req->hot_y;
} else {
fb = NULL;
}
} else {
if (plane->state)
fb = plane->state->fb;
else
fb = plane->fb;
if (fb)
drm_framebuffer_get(fb);
}
if (req->flags & DRM_MODE_CURSOR_MOVE) {
crtc_x = req->x;
crtc_y = req->y;
} else {
crtc_x = crtc->cursor_x;
crtc_y = crtc->cursor_y;
}
if (fb) {
crtc_w = fb->width;
crtc_h = fb->height;
src_w = fb->width << 16;
src_h = fb->height << 16;
}
if (drm_drv_uses_atomic_modeset(dev))
ret = __setplane_atomic(plane, crtc, fb,
crtc_x, crtc_y, crtc_w, crtc_h,
0, 0, src_w, src_h, ctx);
else
ret = __setplane_internal(plane, crtc, fb,
crtc_x, crtc_y, crtc_w, crtc_h,
0, 0, src_w, src_h, ctx);
if (fb)
drm_framebuffer_put(fb);
/* Update successful; save new cursor position, if necessary */
if (ret == 0 && req->flags & DRM_MODE_CURSOR_MOVE) {
crtc->cursor_x = req->x;
crtc->cursor_y = req->y;
}
return ret;
}
static int drm_mode_cursor_common(struct drm_device *dev,
struct drm_mode_cursor2 *req,
struct drm_file *file_priv)
{
struct drm_crtc *crtc;
struct drm_modeset_acquire_ctx ctx;
int ret = 0;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EOPNOTSUPP;
if (!req->flags || (~DRM_MODE_CURSOR_FLAGS & req->flags))
return -EINVAL;
crtc = drm_crtc_find(dev, file_priv, req->crtc_id);
if (!crtc) {
DRM_DEBUG_KMS("Unknown CRTC ID %d\n", req->crtc_id);
return -ENOENT;
}
drm_modeset_acquire_init(&ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE);
retry:
ret = drm_modeset_lock(&crtc->mutex, &ctx);
if (ret)
goto out;
/*
* If this crtc has a universal cursor plane, call that plane's update
* handler rather than using legacy cursor handlers.
*/
if (crtc->cursor) {
ret = drm_modeset_lock(&crtc->cursor->mutex, &ctx);
if (ret)
goto out;
ret = drm_mode_cursor_universal(crtc, req, file_priv, &ctx);
goto out;
}
if (req->flags & DRM_MODE_CURSOR_BO) {
if (!crtc->funcs->cursor_set && !crtc->funcs->cursor_set2) {
ret = -ENXIO;
goto out;
}
/* Turns off the cursor if handle is 0 */
if (crtc->funcs->cursor_set2)
ret = crtc->funcs->cursor_set2(crtc, file_priv, req->handle,
req->width, req->height, req->hot_x, req->hot_y);
else
ret = crtc->funcs->cursor_set(crtc, file_priv, req->handle,
req->width, req->height);
}
if (req->flags & DRM_MODE_CURSOR_MOVE) {
if (crtc->funcs->cursor_move) {
ret = crtc->funcs->cursor_move(crtc, req->x, req->y);
} else {
ret = -EFAULT;
goto out;
}
}
out:
if (ret == -EDEADLK) {
ret = drm_modeset_backoff(&ctx);
if (!ret)
goto retry;
}
drm_modeset_drop_locks(&ctx);
drm_modeset_acquire_fini(&ctx);
return ret;
}
int drm_mode_cursor_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_cursor *req = data;
struct drm_mode_cursor2 new_req;
memcpy(&new_req, req, sizeof(struct drm_mode_cursor));
new_req.hot_x = new_req.hot_y = 0;
return drm_mode_cursor_common(dev, &new_req, file_priv);
}
/*
* Set the cursor configuration based on user request. This implements the 2nd
* version of the cursor ioctl, which allows userspace to additionally specify
* the hotspot of the pointer.
*/
int drm_mode_cursor2_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_cursor2 *req = data;
return drm_mode_cursor_common(dev, req, file_priv);
}
int drm_mode_page_flip_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_crtc_page_flip_target *page_flip = data;
struct drm_crtc *crtc;
struct drm_plane *plane;
struct drm_framebuffer *fb = NULL, *old_fb;
struct drm_pending_vblank_event *e = NULL;
u32 target_vblank = page_flip->sequence;
struct drm_modeset_acquire_ctx ctx;
int ret = -EINVAL;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EOPNOTSUPP;
if (page_flip->flags & ~DRM_MODE_PAGE_FLIP_FLAGS)
return -EINVAL;
if (page_flip->sequence != 0 && !(page_flip->flags & DRM_MODE_PAGE_FLIP_TARGET))
return -EINVAL;
/* Only one of the DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE/RELATIVE flags
* can be specified
*/
if ((page_flip->flags & DRM_MODE_PAGE_FLIP_TARGET) == DRM_MODE_PAGE_FLIP_TARGET)
return -EINVAL;
if ((page_flip->flags & DRM_MODE_PAGE_FLIP_ASYNC) && !dev->mode_config.async_page_flip)
return -EINVAL;
crtc = drm_crtc_find(dev, file_priv, page_flip->crtc_id);
if (!crtc)
return -ENOENT;
plane = crtc->primary;
if (crtc->funcs->page_flip_target) {
u32 current_vblank;
int r;
r = drm_crtc_vblank_get(crtc);
if (r)
return r;
current_vblank = (u32)drm_crtc_vblank_count(crtc);
switch (page_flip->flags & DRM_MODE_PAGE_FLIP_TARGET) {
case DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE:
if ((int)(target_vblank - current_vblank) > 1) {
DRM_DEBUG("Invalid absolute flip target %u, "
"must be <= %u\n", target_vblank,
current_vblank + 1);
drm_crtc_vblank_put(crtc);
return -EINVAL;
}
break;
case DRM_MODE_PAGE_FLIP_TARGET_RELATIVE:
if (target_vblank != 0 && target_vblank != 1) {
DRM_DEBUG("Invalid relative flip target %u, "
"must be 0 or 1\n", target_vblank);
drm_crtc_vblank_put(crtc);
return -EINVAL;
}
target_vblank += current_vblank;
break;
default:
target_vblank = current_vblank +
!(page_flip->flags & DRM_MODE_PAGE_FLIP_ASYNC);
break;
}
} else if (crtc->funcs->page_flip == NULL ||
(page_flip->flags & DRM_MODE_PAGE_FLIP_TARGET)) {
return -EINVAL;
}
drm_modeset_acquire_init(&ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE);
retry:
ret = drm_modeset_lock(&crtc->mutex, &ctx);
if (ret)
goto out;
ret = drm_modeset_lock(&plane->mutex, &ctx);
if (ret)
goto out;
if (plane->state)
old_fb = plane->state->fb;
else
old_fb = plane->fb;
if (old_fb == NULL) {
/* The framebuffer is currently unbound, presumably
* due to a hotplug event, that userspace has not
* yet discovered.
*/
ret = -EBUSY;
goto out;
}
fb = drm_framebuffer_lookup(dev, file_priv, page_flip->fb_id);
if (!fb) {
ret = -ENOENT;
goto out;
}
if (plane->state) {
const struct drm_plane_state *state = plane->state;
ret = drm_framebuffer_check_src_coords(state->src_x,
state->src_y,
state->src_w,
state->src_h,
fb);
} else {
ret = drm_crtc_check_viewport(crtc, crtc->x, crtc->y,
&crtc->mode, fb);
}
if (ret)
goto out;
if (old_fb->format != fb->format) {
DRM_DEBUG_KMS("Page flip is not allowed to change frame buffer format.\n");
ret = -EINVAL;
goto out;
}
if (page_flip->flags & DRM_MODE_PAGE_FLIP_EVENT) {
e = kzalloc(sizeof *e, GFP_KERNEL);
if (!e) {
ret = -ENOMEM;
goto out;
}
e->event.base.type = DRM_EVENT_FLIP_COMPLETE;
e->event.base.length = sizeof(e->event);
e->event.vbl.user_data = page_flip->user_data;
e->event.vbl.crtc_id = crtc->base.id;
ret = drm_event_reserve_init(dev, file_priv, &e->base, &e->event.base);
if (ret) {
kfree(e);
e = NULL;
goto out;
}
}
plane->old_fb = plane->fb;
if (crtc->funcs->page_flip_target)
ret = crtc->funcs->page_flip_target(crtc, fb, e,
page_flip->flags,
target_vblank,
&ctx);
else
ret = crtc->funcs->page_flip(crtc, fb, e, page_flip->flags,
&ctx);
if (ret) {
if (page_flip->flags & DRM_MODE_PAGE_FLIP_EVENT)
drm_event_cancel_free(dev, &e->base);
/* Keep the old fb, don't unref it. */
plane->old_fb = NULL;
} else {
if (!plane->state) {
plane->fb = fb;
drm_framebuffer_get(fb);
}
}
out:
if (fb)
drm_framebuffer_put(fb);
if (plane->old_fb)
drm_framebuffer_put(plane->old_fb);
plane->old_fb = NULL;
if (ret == -EDEADLK) {
ret = drm_modeset_backoff(&ctx);
if (!ret)
goto retry;
}
drm_modeset_drop_locks(&ctx);
drm_modeset_acquire_fini(&ctx);
if (ret && crtc->funcs->page_flip_target)
drm_crtc_vblank_put(crtc);
return ret;
}
