void main()
{
byte sec;
byte min;
byte hrs;
byte day;
byte month;
byte year;
byte dow;
ds1307_init();
/*ds1307_set_date_time(13,6,13,4,01,20,10); // used to set time for first time
//13-Jun-2013-Thursday-01-20-10
delay_ms(1000);*/
while(True)
{
ds1307_get_date(day,month,year,dow);
ds1307_get_time(hrs,min,sec);
printf("\%02d,\%02d,\%02d \r\n",day,month,year);
printf("\%02d,\%02d,\%02d \r\n",hrs,min,sec);
delay_ms(1000);
}
}
int main()
{
int year=0, month=0, date=0, hour=0, minute=0, second=0, day=0;
printf("----------DS1307----------\n\n");
if(!ds1307_init())
{
printf("ds1307 init ERROR!\n");
return 1;
}
year = ds1307_get_year();
month = ds1307_get_mon();
date = ds1307_get_date();
hour = ds1307_get_hour();
minute = ds1307_get_min();
second = ds1307_get_sec();
day = ds1307_get_day();
printf("%d-%d-%d %d:%d:%d day%d \n",year,month,date,hour,minute,second,day);
ds1307_end();
return 0;
}
static int set_userport_rtc_enabled(int value, void *param)
{
int val = value ? 1 : 0;
if (userport_rtc_ds1307_enabled == val) {
return 0;
}
if (val) {
ds1307_context = ds1307_init("USERDS1307");
userport_rtc_list_item = userport_device_register(&rtc_device);
if (userport_rtc_list_item == NULL) {
return -1;
}
ds1307_set_data_line(ds1307_context, 1);
ds1307_set_clk_line(ds1307_context, 1);
} else {
if (ds1307_context) {
ds1307_destroy(ds1307_context, ds1307_rtc_save);
ds1307_context = NULL;
}
userport_device_unregister(userport_rtc_list_item);
userport_rtc_list_item = NULL;
}
userport_rtc_ds1307_enabled = val;
return 0;
}
void main(main){
enable_interrupts( GLOBAL );
//enable_interrupts( INT_RDA );
// enable_interrupts( INT_RTCC );
// setup_adc(ADC_CLOCK_INTERNAL); //configura el converso
setup_adc(ADC_CLOCK_DIV_32);
setup_adc_ports(ALL_ANALOG);
ds1307_init (); ///se inicializa el ds1307
delay_ms(1000);
SET_TRIS_A( 0xFF );
//ds1307_set_date_time (9, 9, 14, 21, 22, 28, 10); /// se escribe en el displositivo
fprintf(COM_int,"Hola Mundo");
while(true){
ds1307_get_date (day, month, yr, dow); /// se obtiene la fecha
ds1307_get_time (hrs, min, sec); /// se obtiene la hora
// fprintf(COM_int,"AT$MSGSND=4,\"");
// fprintf(COM_int, "20%d%02d%02d, %d, %d, %d\"\n\r", yr, month, day, hrs, min, sec);
set_adc_channel(0);
valor=read_adc();
delay_ms(10);
set_adc_channel(1);
valor1=read_adc();
delay_ms(10);
set_adc_channel(2);
valor2=read_adc();
delay_ms(10);
set_adc_channel(3);
valor3=read_adc();
delay_ms(10);
set_adc_channel(4);
valor4=read_adc();
delay_ms(10);
set_adc_channel(5);
valor5=read_adc();
delay_ms(10);
fprintf(COM_int, "#PT01,20%d%02d%02d,%02d%02d%02d,%Lu,%Lu,%Lu,%Lu,%Lu,%Lu,000,999$\"\n\r"yr,month, day, hrs, min, sec, valor, valor1, valor2, valor3, valor4, valor5);
output_high(pin_c1);
delay_ms(1000);
output_low(pin_c1);
delay_ms(1000);
}
}
int main (void) {
if (i2c_open()<0) { printf("Apertura del bus I2C fallita\n"); return 1; }
ds1307_init();
input_data();
set_data(giorno_in,mese_in,anno_in);
printf("Data sul DS1307: %d/%d/%d\r\n",read_day(),read_month(),read_year());
input_ora();
set_ora(ora_in,minuto_in);
while (1){
printf("Data sul DS1307: %02X/%02X/%02X\r\n", read_day(), read_month(), read_year());
printf("Ora sul DS1307: %02X:%02X:%02X\r\n",read_hour(),read_min(),read_sec());
sleep(10);
}
return 1;
}
void init(void)
{
//in outputs intit
//minutenleds + alarmLed
//setze bit 1 =Ausgang
DDRB |= (1 << 1);
DDRB |= (1 << 3);
DDRB |= (1 << 4);
DDRB |= (1 << 5);
DDRC |= (1 << 3); //AlarmLED
// setze pin auf vdd = LED aus
PORTB |= (1 << 1);
PORTB |= (1 << 3);
PORTB |= (1 << 4);
PORTB |= (1 << 5);
PORTC |= (1 << 3); //AlarmLED
//Buzzer als Ausgang setzen und auf +5V schalten = ausgeschaltet
DDRB |= (1 << 2);
PORTB |= (1 << 2);
//Mosfet als Ausgang und ausschalten
DDRC |= (1 << 1);
PORTC |= (1 << 1);
//Matrix leeren
PORTC &= ~(1 << 1); //Mosfet anschalten
for (uint8_t i = 0; i <= 111; i++)
{
matrix[i].r = 0;
matrix[i].g = 0;//TODO: evtl den gesamten BLock nach vorne verschieben
matrix[i].b = 0; //War geplant damit am anfang erst einmal dunkel
}
ws2812_setleds(matrix, 111);
PORTC |= (1 << 1);
//init ds1307
ds1307_init();
}
void main()
{
//initialize data
var_init();
//initialize timers and cp1 interrupt
setup_timer_1(T1_INTERNAL | T1_DIV_BY_2); //div 2 - 26.2 ms overflow
setup_ccp1(CCP_CAPTURE_FE);
//with 819.2 us overflow for Timer0, motor's speed must be at least 20 RPS
setup_timer_0(T0_INTERNAL | T0_DIV_16); //div 16 - 819.2 us overflow
//enable interrupts
enable_interrupts(INT_RB2|INT_RB3|INT_RB4|INT_RB5);;
enable_interrupts(INT_EXT);
enable_interrupts(INT_TIMER1);
enable_interrupts(INT_CCP1);
enable_interrupts(INT_TIMER0);
enable_interrupts(INT_RDA);
enable_interrupts(GLOBAL);
//initialize clock
ds1307_init();
//test power on
rgb_bits.blue = 0xF00F;
rgb_bits.red = 0x0F0F;
rgb_bits.green = 0x00FF;
latch_write(rgb_bits.blue, rgb_bits.red, rgb_bits.green);
//get the first values of date, time
ds1307_get_time(hour, min, sec);
ds1307_get_date(day, month, year, dow);
// calculating hour hand's position for analog clock
anal_hour = hour % 12;
anal_hour = anal_hour * 5;
anal_hour = anal_hour + (int8)(min / 12);
// calculating hour, minute, day, month numbers to display in digital clock
hour_h = (int8)(hour / 10);
hour_l = hour % 10;
min_h = (int8)(min / 10);
min_l = min % 10;
day_h = (int8)(day / 10);
day_l = day % 10;
month_h = (int8)(month / 10);
month_l = month % 10;
// main routine
while(true)
{
// rs232 operation
if (rs232_status == 11)
{
//notify the RS232 transmission for date, time update is successful
latch_write(0x0000, 0x0FF0, 0x0000);
rs232_status = 0;
ds1307_set_date_time(day, month, year, dow, hour, min, sec);
putc('O');
delay_ms(100);
putc('K');
delay_ms(100);
latch_ClearAll();
}
// get the time value from ds1307 after each 5 minutes
if(tick == 300)
{
ds1307_get_time(hour, min, sec);
ds1307_get_date(day, month, year, dow);
anal_hour = hour % 12;
anal_hour = anal_hour * 5;
anal_hour = anal_hour + (int8)(min / 12);
tick = 1;
}
// change values of minute and hour at appropriate value of second and minute
if(sec > 59)
{
sec = 0;
min++;
if(min > 59)
{
min = 0;
ds1307_get_time(hour, min, sec);
anal_hour = hour % 12;
anal_hour = anal_hour * 5;
anal_hour = anal_hour + (int8)(min / 12);
}
//refresh value for digital clock after each minute
hour_h = (int8)(hour / 10);
hour_l = hour % 10;
min_h = (int8)(min / 10);
min_l = min % 10;
}
//display routine
if(circle_trigger == 1)
{
circle_trigger = 0;
if ((smode % 2) == 1) latch_ClearAll();
digit_sec++;
section_trigger = 1;
section_count = MAX_SECTION;
section_timer = 256 - (int8)(sigHall_timer / (MAX_SECTION * 8)) + tuning;
while(circle_trigger == 0 && section_count > 0)
{
if(section_trigger == 1)
{
set_timer0(section_timer);
section_trigger = 0;
//data calculation
fetch_data();
//shifting data
latch_write(rgb_bits.blue, rgb_bits.red, rgb_bits.green);
//smode change between continuous display and discrete display
if ((smode % 2) == 1 && section_count > 1) latch_ClearAll();
section_count--;
}
}
}// circle_trigger
} // end of while(true)
}
int main(void)
{
lcd_init();
ds1307_init();
adc_init();
timer_init();
asm("sei");
/*
//test
lcd_str("Hello, World");
lcd_gotoxy(1,0);
lcd_str("by shtomik");
_delay_ms(1000);
lcd_clr();
lcd_str("after clr");*/
start_t();
//test
ds1307_setdate(12, 12, 31, 23, 01, 35);
//смонтировать microSD
res = pf_mount(&fs);
if(res == FR_OK)
{
//диск смонтирован и мы продолжаем работу
if(pf_open("test.txt") == FR_OK)
{
//открыли файл в корне test.txt
//...
pf_lseek(0);
//заполняем буффер, надо набрать 512 байт инфы и писать
//иначе будет много лишних пробелов
//sprintf(buff, "%s\n%s", "Hello,World!", "by_sht");
//записываем его на карту
pf_write(buff, 512, &br);
//финализируем запись
pf_write(NULL, 0, &br);
pf_lseek(512);
pf_write(buff, 512, &br);
//финализируем запись
pf_write(NULL, 0, &br);
lcd_clr();
lcd_str("ok");
}
else
{
//file not found or ...
lcd_str("file not found");
}
//демонтируем диск передав функции нулевой указатель
pf_mount(NULL);
lcd_clr();
lcd_str("file write");
}
else
{
//не удалось смонтировать диск
lcd_clr();
lcd_str("not flash");
}
while( 1 )
{
;
}
return 0;
}
main()
{
ds1307_init();
// Set date for -> 15 June 2005 Tuesday
// Set time for -> 15:20:55
//ds1307_set_date_time(18,11,12,2,22,05,55);
setup_adc(ADC_CLOCK_INTERNAL);
//enables the a/d module
set_adc_channel(0);
//the next read_adc call will read channel 0
delay_us(10);
//a small delay is required after setting the channel
//aguarda 100ms
delay_ms(100);
//inicializa o display LCD
inic_display();
while (true)
{
switch(tela){
case 0:
display(0,0x01);
update_clock();
read_temperature();
check_temperature();
show_temperature();
show_clock();
if(tecla_set_status && !tecla_menos_status && tecla_mais_status)
tela = 2;
if(tecla_set_status && tecla_menos_status && !tecla_mais_status)
tela = 1;
break;
case 1:
read_temperature();
configure_temperature();
break;
case 2:
//update_clock();
configure_time();
break;
}
//alterna o estado do pino D4
//output_toggle(PIN_D1);
verifica_teclas();
//aguarda 500ms
delay_ms (100);
}
}
/************************************************************************
* Main Program ***** Programa Principal *
************************************************************************/
void main()
{
setup_psp(PSP_DISABLED);
setup_wdt(WDT_OFF);
setup_timer_0(RTCC_INTERNAL);
setup_timer_1(T1_INTERNAL|T1_DIV_BY_8);
setup_timer_2(T2_DIV_BY_16,0xFF,16);
setup_timer_3(T3_DISABLED|T3_DIV_BY_1);
setup_comparator(NC_NC_NC_NC);
setup_vref(FALSE);
setup_adc( ADC_OFF );
enable_interrupts(INT_TIMER1);
enable_interrupts(INT_TIMER2);
enable_interrupts(INT_RDA);
enable_interrupts(INT_EXT1);
enable_interrupts(global);
str_init(print_date);
str_init(print_time);
set_timer1(0);
init_ext_eeprom();
ds1307_init();
glcd_init(ON);
readconfig();
draw_sect();
while (1)
{
if (firstrun==255)
{
glcd_fillscreen(OFF);
glcd_loadscreen();
glcd_showlogo();
delay_ms(1500);
menu_mainmenu();
firstrun = 0;
write_eeprom(0x00, firstrun);
}
if (config==1)
{
menu_mainmenu();
if(UniTemp[0]==0x43)
{
write_eeprom(0x01, 1);
}
else if(UniTemp[0]==0x46)
{
write_eeprom(0x01, 2);
}
if(UniPres[0]==0x6D)
{
write_eeprom(0x02, 1);
}
else if(UniPres[0]==0x50)
{
write_eeprom(0x02, 2);
}
if(UniVel[0]==0x4E)
{
write_eeprom(0x03, 1);
}
else if(UniVel[0]==0x6B)
{
write_eeprom(0x03, 2);
}
else if(UniVel[0]==0x6D)
{
write_eeprom(0x03, 3);
}
update_readings();
button = !PRESSED;
config=0;
}
if (uh>40)
{
twop[0]=":";
guion[0]="-";
spa[0]=" ";
str_init(print_time);
str_init(print_date);
ds1307_get_time(aux_hr,aux_min,aux_sec);
ds1307_get_date(aux_day, aux_month, aux_year, aux_dow);
itoa(aux_day,10,print_day);
itoa(aux_month,10,print_month);
itoa(aux_year,10,print_year);
switch(aux_dow)
{
case 0:
{
print_dow[0] = "D";
break;
}
case 1:
{
print_dow[0] = "L";
break;
}
case 2:
{
print_dow[0] = "M";
break;
}
case 3:
{
print_dow[0] = "I";
break;
}
case 4:
{
print_dow[0] = "J";
break;
}
case 5:
{
print_dow[0] = "V";
break;
}
case 6:
{
print_dow[0] = "S";
break;
}
}
sprintf(print_date,"%s:%s-%s-%s",print_dow,print_day,print_month,print_year);
//strcat(print_date,print_dow);
//strcat(print_date,twop);
//strcat(print_date,print_day);
//strcat(print_date,guion);
// strcat(print_date,print_month);
//strcat(print_date,guion);
//strcat(print_date,print_year);
if(aop[0]==0x50)
{
aux_hr=aux_hr-20;
}
itoa(aux_hr,10,print_hr);
itoa(aux_min,10,print_min);
strcat(print_time,print_hr);
strcat(print_time,twop);
strcat(print_time,print_min);
if ((aop[0]==0x41)||(aop[0]==0x50))
{
strcat(print_time,twop);
strcat(print_time,aop);
}
rcv_td=1;
uh=0;
}
poll_ok();
lightbuttons();
while(bkbhit)
{
auxi = bgetc();
switch (auxi)
{
case 0x54: //T
{
type=1;
str_init(string);
break;
}
case 0x50: //P
{
type=2;
str_init(string);
break;
}
case 0x48: //H
{
type=3;
str_init(string);
break;
}
case 0x41: //A
{
type=4;
str_init(string);
break;
}
case 0x57: //W
{
type=5;
str_init(string);
break;
}
case 0x52: //R
{
type=6;
str_init(string);
break;
}
case 0x44: //D
{
type=7;
str_init(string);
break;
}
case 0x4C: //L
{
type=8;
str_init(string);
break;
}
case 0x56: //V
{
type=9;
str_init(string);
break;
}
case 0x42: //B
{
type=10;
str_init(string);
break;
}
}
switch (type)
{
case 1: //Temperatura
{
if ((auxi!=0x0D)&&(auxi!=0x54))
{
string[i] = auxi;
i++;
}
if (auxi==0x0D)
{
i=0;
str_init(tprint);
tt = atol(string);
if(UniTemp[0]==0x46)
{
tt = ((tt*9)/5)+320;
}
strcat(temp_buffer_eeprom,string);
eep+=3;
sprintf(ttt,"%3.1w",tt);
strcat(tprint,ttt);
strcat(tprint,UniTemp);
strcpy(t2_print,tprint);
rcv_t=1;
}
break;
}
case 2: //Presion
{
if ((auxi!=0x0D)&&(auxi!=0x50))
{
string[i] = auxi;
i++;
}
if (auxi==0x0D)
{
i=0;
str_init(pprint);
pp = atoi32(string);
if(UniPres[0]==0x50)
{
pp = pp*10;
sprintf(ppp,"%6.0w",pp);
strcat(pprint,ppp);
strcat(pprint,UniPres);
}
else
{
sprintf(ppp,"%4.1w",pp);
strcat(pprint,ppp);
strcat(pprint,UniPres);
}
rcv_p=1;
}
break;
}
case 3: //Humedad
{
if ((auxi!=0x0D)&&(auxi!=0x48))
{
string[i] = auxi;
i++;
}
if (auxi==0x0D)
{
i=0;
char uni[]="%";
str_init(hprint);
hh = atol(string);
sprintf(hhh,"%2.1w",hh);
strcat(hprint,hhh);
strcat(hprint,uni);
rcv_h=1;
}
break;
}
case 4: //Altitud
{
if ((auxi!=0x0D)&&(auxi!=0x41))
{
string[i] = auxi;
i++;
}
if (auxi==0x0D)
{
i=0;
char uni[]="m";
str_init(aprint);
aa = atol(string);
sprintf(aaa,"%5.1w",aa);
strcat(aprint,aaa);
strcat(aprint,uni);
rcv_a=1;
}
break;
}
case 5: //Clima
{
if ((auxi!=0x0D)&&(auxi!=0x57))
{
string[i] = auxi;
i++;
}
if (auxi==0x0D)
{
i=0;
ww = atoi(string);
rcv_w=1;
}
break;
}
case 6: //Probabilidad de lluvia
{
if ((auxi!=0x0D)&&(auxi!=0x52))
{
string[i] = auxi;
i++;
}
if (auxi==0x0D)
{
i=0;
char uni[]="%";
str_init(pdlprint);
ppdl = atol(string);
sprintf(pppdl,"%2.0w",ppdl);
strcat(pdlprint,pppdl);
strcat(pdlprint,uni);
rcv_pdl=1;
}
break;
}
case 7: //Direccion del viento
{
if ((auxi!=0x0D)&&(auxi!=0x44))
{
string[i] = auxi;
i++;
}
if (auxi==0x0D)
{
i=0;
str_init(dprint);
dd = atol(string);
switch(dd)
{
case 0:
{
dprint[0]="N";
dprint[1]="\0";
break;
}
case 1:
{
dprint[0]="N";
dprint[1]="E";
dprint[2]="\0";
break;
}
case 2:
{
dprint[0]="E";
dprint[1]="\0";
break;
}
case 3:
{
dprint[0]="S";
dprint[1]="E";
dprint[2]="\0";
break;
}
case 4:
{
dprint[0]="S";
dprint[1]="\0";
break;
}
case 5:
{
dprint[0]="S";
dprint[1]="O";
dprint[2]="\0";
break;
}
case 6:
{
dprint[0]="O";
dprint[1]="\0";
break;
}
case 7:
{
dprint[0]="N";
dprint[1]="O";
dprint[2]="\0";
break;
}
}
rcv_d=1;
}
break;
}
case 8: //Intensidad de luz
{
if ((auxi!=0x0D)&&(auxi!=0x4C))
{
string[i] = auxi;
i++;
}
if (auxi==0x0D)
{
i=0;
ll = atoi(string);
ll = ll*6.3+67;
rcv_l=1;
}
break;
}
case 9: //Velocidad del viento
{
if ((auxi!=0x0D)&&(auxi!=0x56))
{
string[i] = auxi;
i++;
}
if (auxi==0x0D)
{
i=0;
str_init(vprint);
vv = atoi32(string);
if(UniVel[0]==0x6D)
{
vv = vv * 0.5144;
}
else if(UniVel[0]==0x6B)
{
vv = vv * 1.852;
}
else
{
}
sprintf(vvv,"%4.1w",vv);
strcat(vprint,vvv);
strcat(vprint,UniVel);
rcv_v=1;
}
break;
}
case 10: //Bat Status
{
if ((auxi!=0x0D)&&(auxi!=0x42))
{
string[i] = auxi;
i++;
}
if (auxi==0x0D)
{
i=0;
bat1_st = atoi(string);
rcv_bat1_st=1;
}
break;
}
}
if(eep>=9)
{
update_eeprom();
eep=0;
}
update_readings();
glcd_update();
//END KBHIT
}
glcd_update();
//ENDWHILE
}
//ENDMAIN
}