/*
* getaddrinfo_thread() resolves a name, calls Curl_addrinfo6_callback and then
* exits.
*
* For builds without ARES, but with ENABLE_IPV6, create a resolver thread
* and wait on it.
*/
static unsigned __stdcall getaddrinfo_thread (void *arg)
{
struct connectdata *conn = (struct connectdata*) arg;
struct thread_data *td = (struct thread_data*) conn->async.os_specific;
struct addrinfo *res;
char service [NI_MAXSERV];
int rc;
*stderr = *td->stderr_file;
itoa(conn->async.port, service, 10);
WSASetLastError(conn->async.status = NO_DATA); /* pending status */
rc = getaddrinfo(conn->async.hostname, service, &td->hints, &res);
if (rc == 0) {
#ifdef DEBUG_THREADING_GETADDRINFO
dump_addrinfo (conn, res);
#endif
Curl_addrinfo6_callback(conn, CURL_ASYNC_SUCCESS, res);
}
else {
Curl_addrinfo6_callback(conn, (int)WSAGetLastError(), NULL);
TRACE(("Winsock-error %d, no address\n", conn->async.status));
}
return (rc);
/* An implicit _endthreadex() here */
}
/*
* Curl_getaddrinfo() when built ipv6-enabled (non-threading and
* non-ares version).
*
* Returns name information about the given hostname and port number. If
* successful, the 'addrinfo' is returned and the forth argument will point to
* memory we need to free after use. That memory *MUST* be freed with
* Curl_freeaddrinfo(), nothing else.
*/
Curl_addrinfo *Curl_getaddrinfo(struct connectdata *conn,
const char *hostname,
int port,
int *waitp)
{
struct addrinfo hints;
Curl_addrinfo *res;
int error;
char sbuf[12];
char *sbufptr = NULL;
char addrbuf[128];
int pf;
struct SessionHandle *data = conn->data;
*waitp = 0; /* synchronous response only */
/*
* Check if a limited name resolve has been requested.
*/
switch(conn->ip_version) {
case CURL_IPRESOLVE_V4:
pf = PF_INET;
break;
case CURL_IPRESOLVE_V6:
pf = PF_INET6;
break;
default:
pf = PF_UNSPEC;
break;
}
if((pf != PF_INET) && !Curl_ipv6works())
/* the stack seems to be a non-ipv6 one */
pf = PF_INET;
memset(&hints, 0, sizeof(hints));
hints.ai_family = pf;
hints.ai_socktype = conn->socktype;
if((1 == Curl_inet_pton(AF_INET, hostname, addrbuf)) ||
(1 == Curl_inet_pton(AF_INET6, hostname, addrbuf))) {
/* the given address is numerical only, prevent a reverse lookup */
hints.ai_flags = AI_NUMERICHOST;
}
if(port) {
snprintf(sbuf, sizeof(sbuf), "%d", port);
sbufptr=sbuf;
}
error = Curl_getaddrinfo_ex(hostname, sbufptr, &hints, &res);
if(error) {
infof(data, "getaddrinfo(3) failed for %s:%d\n", hostname, port);
return NULL;
}
dump_addrinfo(conn, res);
return res;
}
/*
* getaddrinfo_thread() resolves a name, calls Curl_addrinfo6_callback and then
* exits.
*
* For builds without ARES, but with ENABLE_IPV6, create a resolver thread
* and wait on it.
*/
static unsigned __stdcall getaddrinfo_thread (void *arg)
{
struct connectdata *conn = (struct connectdata*) arg;
struct thread_data *td = (struct thread_data*) conn->async.os_specific;
struct addrinfo *res;
char service [NI_MAXSERV];
int rc;
/* Duplicate the passed mutex handle.
* This allows us to use it even after the container gets destroyed
* due to a resolver timeout.
*/
HANDLE mutex_waiting = NULL;
HANDLE curr_proc = GetCurrentProcess();
if (!DuplicateHandle(curr_proc, td->mutex_waiting,
curr_proc, &mutex_waiting, 0, FALSE,
DUPLICATE_SAME_ACCESS)) {
/* failed to duplicate the mutex, no point in continuing */
return -1;
}
#ifndef _WIN32_WCE
*stderr = *td->stderr_file;
#endif
itoa(conn->async.port, service, 10);
WSASetLastError(conn->async.status = NO_DATA); /* pending status */
rc = getaddrinfo(conn->async.hostname, service, &td->hints, &res);
/* is the thread initiator still waiting for us ? */
if (WaitForSingleObject(mutex_waiting, 0) == WAIT_TIMEOUT) {
/* yes, it is */
/* Mark that we have obtained the information, and that we are
* calling back with it.
*/
SetEvent(td->event_resolved);
if (rc == 0) {
#ifdef DEBUG_THREADING_GETADDRINFO
dump_addrinfo (conn, res);
#endif
rc = Curl_addrinfo6_callback(conn, CURL_ASYNC_SUCCESS, res);
}
else {
rc = Curl_addrinfo6_callback(conn, (int)WSAGetLastError(), NULL);
TRACE(("Winsock-error %d, no address\n", conn->async.status));
}
}
/* clean up */
CloseHandle(mutex_waiting);
return (rc);
/* An implicit _endthreadex() here */
}
static int setup_multicast_impl(char * bindAddr, unsigned int nTTL, char * p_multicast_addr, char * p_port, struct mcast_connection * p_mcast_conn)
{
int rc;
debug_outputln("%s %4.4u : %s %s %s %3.3u", __FILE__, __LINE__, bindAddr, p_multicast_addr, p_port, nTTL);
p_mcast_conn->multiAddr_ = ResolveAddressWithFlags(p_multicast_addr, p_port, AF_UNSPEC, SOCK_DGRAM, IPPROTO_UDP, AI_PASSIVE);
if (NULL == p_mcast_conn->multiAddr_)
{
debug_outputln("%s %4.4u : %10.10d %8.8x", __FILE__, __LINE__, WSAGetLastError(), WSAGetLastError());
goto cleanup;
}
dump_addrinfo(p_mcast_conn->multiAddr_, __FILE__, __LINE__);
// Resolve the binding address
p_mcast_conn->bindAddr_ = ResolveAddressWithFlags(bindAddr, p_port, p_mcast_conn->multiAddr_->ai_family, p_mcast_conn->multiAddr_->ai_socktype, p_mcast_conn->multiAddr_->ai_protocol, AI_PASSIVE);
if (NULL == p_mcast_conn->bindAddr_)
{
debug_outputln("%s %4.4u : %10.10d %8.8x", __FILE__, __LINE__, WSAGetLastError(), WSAGetLastError());
goto cleanup;
}
dump_addrinfo(p_mcast_conn->bindAddr_, __FILE__, __LINE__);
//
// Create the socket. In Winsock 1 you don't need any special
// flags to indicate multicasting.
//
p_mcast_conn->socket_ = socket(p_mcast_conn->multiAddr_->ai_family, p_mcast_conn->multiAddr_->ai_socktype, p_mcast_conn->multiAddr_->ai_protocol);
if (p_mcast_conn->socket_ == INVALID_SOCKET)
{
debug_outputln("%s %4.4u : %10.10d %8.8x", __FILE__, __LINE__, WSAGetLastError(), WSAGetLastError());
goto cleanup;
}
if (!set_reuse_addr(p_mcast_conn->socket_))
{
debug_outputln("%s %4.4u : %10.10d %8.8x", __FILE__, __LINE__, WSAGetLastError(), WSAGetLastError());
goto cleanup;
}
// Join the multicast group if specified
rc = join_mcast_group_set_ttl(p_mcast_conn->socket_, p_mcast_conn->multiAddr_, p_mcast_conn->bindAddr_, nTTL);
if (rc == SOCKET_ERROR)
{
debug_outputln("%s %4.4u : %10.10d %8.8x", __FILE__, __LINE__, WSAGetLastError(), WSAGetLastError());
goto cleanup;
}
dump_locally_bound_socket(p_mcast_conn->socket_, __FILE__, __LINE__);
return 1;
cleanup:
return 0;
}
/*
* getaddrinfo_thread() resolves a name, calls Curl_addrinfo6_callback and then
* exits.
*
* For builds without ARES, but with ENABLE_IPV6, create a resolver thread
* and wait on it.
*/
static unsigned __stdcall getaddrinfo_thread (void *arg)
{
struct connectdata *conn = (struct connectdata*) arg;
struct thread_data *td = (struct thread_data*) conn->async.os_specific;
struct addrinfo *res;
char service [NI_MAXSERV];
int rc;
struct addrinfo hints = td->hints;
/* Duplicate the passed mutex handle.
* This allows us to use it even after the container gets destroyed
* due to a resolver timeout.
*/
struct thread_sync_data tsd = { 0,0,0,NULL };
if (!init_thread_sync_data(td, conn->async.hostname, &tsd)) {
/* thread synchronization data initialization failed */
return -1;
}
#ifndef _WIN32_WCE
*stderr = *td->stderr_file;
#endif
itoa(conn->async.port, service, 10);
WSASetLastError(conn->async.status = NO_DATA); /* pending status */
/* Signaling that we have initialized all copies of data and handles we
need */
SetEvent(td->event_thread_started);
rc = getaddrinfo(tsd.hostname, service, &hints, &res);
/* is parent thread waiting for us and are we able to access conn members? */
if (acquire_thread_sync(&tsd)) {
/* Mark that we have obtained the information, and that we are calling
back with it. */
SetEvent(td->event_resolved);
if (rc == 0) {
#ifdef DEBUG_THREADING_GETADDRINFO
dump_addrinfo (conn, res);
#endif
rc = Curl_addrinfo6_callback(conn, CURL_ASYNC_SUCCESS, res);
}
else {
rc = Curl_addrinfo6_callback(conn, (int)WSAGetLastError(), NULL);
TRACE(("Winsock-error %d, no address\n", conn->async.status));
}
release_thread_sync(&tsd);
}
/* clean up */
destroy_thread_sync_data(&tsd);
return (rc);
/* An implicit _endthreadex() here */
}
static int
compare_addrinfo(struct addrinfo *ai1, struct addrinfo *ai2, void *mdata)
{
int rv;
if (debug) {
printf("testing equality of 2 addrinfo structures\n");
}
rv = compare_addrinfo_(ai1, ai2);
if (debug) {
if (rv == 0)
printf("equal\n");
else {
dump_addrinfo(ai1);
dump_addrinfo(ai2);
printf("not equal\n");
}
}
return (rv);
}
static int
addrinfo_test_correctness(struct addrinfo *ai, void *mdata)
{
if (debug) {
printf("testing correctness with the following data:\n");
dump_addrinfo(ai);
}
if (ai == NULL)
goto errfin;
if (!((ai->ai_family >= 0) && (ai->ai_family < AF_MAX)))
goto errfin;
if ((ai->ai_socktype != 0) && (ai->ai_socktype != SOCK_STREAM) &&
(ai->ai_socktype != SOCK_DGRAM) && (ai->ai_socktype != SOCK_RAW))
goto errfin;
if ((ai->ai_protocol != 0) && (ai->ai_protocol != IPPROTO_UDP) &&
(ai->ai_protocol != IPPROTO_TCP))
goto errfin;
if ((ai->ai_flags & ~(AI_CANONNAME | AI_NUMERICHOST | AI_PASSIVE)) != 0)
goto errfin;
if ((ai->ai_addrlen != ai->ai_addr->sa_len) ||
(ai->ai_family != ai->ai_addr->sa_family))
goto errfin;
if (debug)
printf("correct\n");
return (0);
errfin:
if (debug)
printf("incorrect\n");
return (-1);
}
void
set_up_server(char hostname[], char port[], int af)
{
struct addrinfo hints;
struct addrinfo *local_res;
struct addrinfo *local_res_temp;
struct sockaddr_storage peeraddr;
netperf_socklen_t peeraddr_len = sizeof(peeraddr);
SOCKET server_control;
int on=1;
int count;
int error;
int not_listening;
#if !defined(WIN32) && !defined(MPE) && !defined(__VMS)
FILE *rd_null_fp; /* Used to redirect from "/dev/null". */
FILE *wr_null_fp; /* Used to redirect to "/dev/null". */
#endif /* !WIN32 !MPE !__VMS */
if (debug) {
fprintf(stderr,
"set_up_server called with host '%s' port '%s' remfam %d\n",
hostname,
port,
af);
fflush(stderr);
}
memset(&hints,0,sizeof(hints));
hints.ai_family = af;
hints.ai_socktype = SOCK_STREAM;
hints.ai_protocol = IPPROTO_TCP;
hints.ai_flags = AI_PASSIVE;
count = 0;
do {
error = getaddrinfo((char *)hostname,
(char *)port,
&hints,
&local_res);
count += 1;
if (error == EAI_AGAIN) {
if (debug) {
fprintf(stderr,"Sleeping on getaddrinfo EAI_AGAIN\n");
fflush(stderr);
}
sleep(1);
}
} while ((error == EAI_AGAIN) && (count <= 5));
if (error) {
fprintf(stderr,
"set_up_server: could not resolve remote '%s' port '%s' af %d",
hostname,
port,
af);
fprintf(stderr,"\n\tgetaddrinfo returned %d %s\n",
error,
gai_strerror(error));
exit(-1);
}
if (debug) {
dump_addrinfo(stderr, local_res, hostname, port, af);
}
not_listening = 1;
local_res_temp = local_res;
while((local_res_temp != NULL) && (not_listening)) {
fprintf(stderr,
"Starting netserver at port %s\n",
port);
server_control = socket(local_res_temp->ai_family,SOCK_STREAM,0);
if (server_control == INVALID_SOCKET) {
perror("set_up_server could not allocate a socket");
exit(-1);
}
/* happiness and joy, keep going */
if (setsockopt(server_control,
SOL_SOCKET,
SO_REUSEADDR,
(char *)&on ,
sizeof(on)) == SOCKET_ERROR) {
if (debug) {
perror("warning: set_up_server could not set SO_REUSEADDR");
}
}
/* still happy and joyful */
if ((bind (server_control,
local_res_temp->ai_addr,
local_res_temp->ai_addrlen) != SOCKET_ERROR) &&
(listen (server_control,5) != SOCKET_ERROR)) {
not_listening = 0;
break;
}
else {
/* we consider a bind() or listen() failure a transient and try
the next address */
if (debug) {
perror("warning: set_up_server failed a bind or listen call\n");
}
local_res_temp = local_res_temp->ai_next;
continue;
}
}
if (not_listening) {
fprintf(stderr,
"set_up_server could not establish a listen endpoint for %s port %s with family %s\n",
host_name,
port,
inet_ftos(af));
fflush(stderr);
exit(-1);
}
else {
printf("Starting netserver at hostname %s port %s and family %s\n",
hostname,
port,
inet_ftos(af));
}
/*
setpgrp();
*/
#if !defined(WIN32) && !defined(MPE) && !defined(__VMS)
/* Flush the standard I/O file descriptors before forking. */
fflush (stdin);
fflush (stdout);
fflush (stderr);
#if defined(HAVE_FORK)
switch (fork())
#else
switch (vfork())
#endif
{
case -1:
perror("netperf server error");
exit(1);
case 0:
/* Redirect stdin from "/dev/null". */
rd_null_fp = fopen ("/dev/null", "r");
if (rd_null_fp == NULL)
{
perror ("netserver: opening for reading: /dev/null");
exit (1);
}
if (close (STDIN_FILENO) == -1)
{
perror ("netserver: closing stdin file descriptor");
exit (1);
}
if (dup (fileno (rd_null_fp)) == -1)
{
perror ("netserver: duplicate /dev/null read file descr. to stdin");
exit (1);
}
/* Redirect stdout to the debug write file descriptor. */
if (close (STDOUT_FILENO) == -1)
{
perror ("netserver: closing stdout file descriptor");
exit (1);
}
if (dup (fileno (where)) == -1)
{
perror ("netserver: duplicate the debug write file descr. to stdout");
exit (1);
}
/* Redirect stderr to "/dev/null". */
wr_null_fp = fopen ("/dev/null", "w");
if (wr_null_fp == NULL)
{
perror ("netserver: opening for writing: /dev/null");
exit (1);
}
if (close (STDERR_FILENO) == -1)
{
perror ("netserver: closing stderr file descriptor");
exit (1);
}
if (dup (fileno (wr_null_fp)) == -1)
{
perror ("netserver: dupicate /dev/null write file descr. to stderr");
exit (1);
}
#ifndef NO_SETSID
setsid();
#else
setpgrp();
#endif /* NO_SETSID */
/* some OS's have SIGCLD defined as SIGCHLD */
#ifndef SIGCLD
#define SIGCLD SIGCHLD
#endif /* SIGCLD */
signal(SIGCLD, SIG_IGN);
#endif /* !WIN32 !MPE !__VMS */
for (;;)
{
if ((server_sock=accept(server_control,
(struct sockaddr *)&peeraddr,
&peeraddr_len)) == INVALID_SOCKET)
{
printf("server_control: accept failed errno %d\n",errno);
exit(1);
}
#if defined(MPE) || defined(__VMS)
/*
* Since we cannot fork this process , we cant fire any threads
* as they all share the same global data . So we better allow
* one request at at time
*/
process_requests() ;
#elif WIN32
{
BOOL b;
char cmdline[80];
PROCESS_INFORMATION pi;
STARTUPINFO si;
int i;
memset(&si, 0 , sizeof(STARTUPINFO));
si.cb = sizeof(STARTUPINFO);
/* Pass the server_sock as stdin for the new process. */
/* Hopefully this will continue to be created with the OBJ_INHERIT attribute. */
si.hStdInput = (HANDLE)server_sock;
si.hStdOutput = GetStdHandle(STD_OUTPUT_HANDLE);
si.hStdError = GetStdHandle(STD_ERROR_HANDLE);
si.dwFlags = STARTF_USESTDHANDLES;
/* Build cmdline for child process */
strcpy(cmdline, program);
if (verbosity > 1) {
snprintf(&cmdline[strlen(cmdline)], sizeof(cmdline) - strlen(cmdline), " -v %d", verbosity);
}
for (i=0; i < debug; i++) {
snprintf(&cmdline[strlen(cmdline)], sizeof(cmdline) - strlen(cmdline), " -d");
}
snprintf(&cmdline[strlen(cmdline)], sizeof(cmdline) - strlen(cmdline), " -I %x", (int)(UINT_PTR)server_sock);
snprintf(&cmdline[strlen(cmdline)], sizeof(cmdline) - strlen(cmdline), " -i %x", (int)(UINT_PTR)server_control);
snprintf(&cmdline[strlen(cmdline)], sizeof(cmdline) - strlen(cmdline), " -i %x", (int)(UINT_PTR)where);
b = CreateProcess(NULL, /* Application Name */
cmdline,
NULL, /* Process security attributes */
NULL, /* Thread security attributes */
TRUE, /* Inherit handles */
0, /* Creation flags PROCESS_QUERY_INFORMATION, */
NULL, /* Enviornment */
NULL, /* Current directory */
&si, /* StartupInfo */
&pi);
if (!b)
{
perror("CreateProcessfailure: ");
exit(1);
}
/* We don't need the thread or process handles any more; let them */
/* go away on their own timeframe. */
CloseHandle(pi.hThread);
CloseHandle(pi.hProcess);
/* And close the server_sock since the child will own it. */
close(server_sock);
}
#else
signal(SIGCLD, SIG_IGN);
#if defined(HAVE_FORK)
switch (fork())
#else
switch (vfork())
#endif
{
case -1:
/* something went wrong */
exit(1);
case 0:
/* we are the child process */
close(server_control);
process_requests();
exit(0);
break;
default:
/* we are the parent process */
close(server_sock);
/* we should try to "reap" some of our children. on some */
/* systems they are being left as defunct processes. we */
/* will call waitpid, looking for any child process, */
/* with the WNOHANG feature. when waitpid return a zero, */
/* we have reaped all the children there are to reap at */
/* the moment, so it is time to move on. raj 12/94 */
#ifndef DONT_WAIT
#ifdef NO_SETSID
/* Only call "waitpid()" if "setsid()" is not used. */
while(waitpid(-1, NULL, WNOHANG) > 0) { }
#endif /* NO_SETSID */
#endif /* DONT_WAIT */
break;
}
#endif /* !WIN32 !MPE !__VMS */
} /*for*/
#if !defined(WIN32) && !defined(MPE) && !defined(__VMS)
break; /*case 0*/
default:
exit (0);
}
#endif /* !WIN32 !MPE !__VMS */
}
void
create_listens(char hostname[], char port[], int af) {
struct addrinfo hints;
struct addrinfo *local_res;
struct addrinfo *local_res_temp;
int count, error;
int on = 1;
SOCKET temp_socket;
struct listen_elt *temp_elt;
if (debug) {
fprintf(stderr,
"%s: called with host '%s' port '%s' family %s(%d)\n",
__FUNCTION__,
hostname,
port,
inet_ftos(af),
af);
fflush(stderr);
}
memset(&hints,0,sizeof(hints));
hints.ai_family = af;
hints.ai_socktype = SOCK_STREAM;
hints.ai_protocol = IPPROTO_TCP;
hints.ai_flags = AI_PASSIVE;
count = 0;
do {
error = getaddrinfo((char *)hostname,
(char *)port,
&hints,
&local_res);
count += 1;
if (error == EAI_AGAIN) {
if (debug) {
fprintf(stderr,
"%s: Sleeping on getaddrinfo EAI_AGAIN\n",
__FUNCTION__);
fflush(stderr);
}
sleep(1);
}
} while ((error == EAI_AGAIN) && (count <= 5));
if (error) {
if (debug) {
fprintf(stderr,
"%s: could not resolve remote '%s' port '%s' af %d\n"
"\tgetaddrinfo returned %s (%d)\n",
__FUNCTION__,
hostname,
port,
af,
gai_strerror(error),
error);
}
return;
}
if (debug) {
dump_addrinfo(stderr, local_res, hostname, port, af);
}
local_res_temp = local_res;
while (local_res_temp != NULL) {
temp_socket = socket(local_res_temp->ai_family,SOCK_STREAM,0);
if (temp_socket == INVALID_SOCKET) {
if (debug) {
fprintf(stderr,
"%s could not allocate a socket: %s (errno %d)\n",
__FUNCTION__,
strerror(errno),
errno);
fflush(stderr);
}
local_res_temp = local_res_temp->ai_next;
continue;
}
/* happiness and joy, keep going */
if (setsockopt(temp_socket,
SOL_SOCKET,
SO_REUSEADDR,
(char *)&on ,
sizeof(on)) == SOCKET_ERROR) {
if (debug) {
fprintf(stderr,
"%s: warning: could not set SO_REUSEADDR: %s (errno %d)\n",
__FUNCTION__,
strerror(errno),
errno);
fflush(stderr);
}
}
/* still happy and joyful */
if ((bind(temp_socket,
local_res_temp->ai_addr,
local_res_temp->ai_addrlen) != SOCKET_ERROR) &&
(listen(temp_socket,1024) != SOCKET_ERROR)) {
/* OK, now add to the list */
temp_elt = (struct listen_elt *)malloc(sizeof(struct listen_elt));
if (temp_elt) {
temp_elt->fd = temp_socket;
if (listen_list) {
temp_elt->next = listen_list;
}
else {
temp_elt->next = NULL;
}
listen_list = temp_elt;
}
else {
fprintf(stderr,
"%s: could not malloc a listen_elt\n",
__FUNCTION__);
fflush(stderr);
exit(1);
}
}
else {
/* we consider a bind() or listen() failure a transient and try
the next address */
if (debug) {
fprintf(stderr,
"%s: warning: bind or listen call failure: %s (errno %d)\n",
__FUNCTION__,
strerror(errno),
errno);
fflush(stderr);
}
close(temp_socket);
}
local_res_temp = local_res_temp->ai_next;
}
}
/*
* Curl_getaddrinfo() when built ipv6-enabled (non-threading and
* non-ares version).
*
* Returns name information about the given hostname and port number. If
* successful, the 'addrinfo' is returned and the forth argument will point to
* memory we need to free after use. That memory *MUST* be freed with
* Curl_freeaddrinfo(), nothing else.
*/
Curl_addrinfo *Curl_getaddrinfo(struct connectdata *conn,
const char *hostname,
int port,
int *waitp)
{
struct addrinfo hints;
Curl_addrinfo *res;
int error;
char sbuf[NI_MAXSERV];
char *sbufptr = NULL;
char addrbuf[128];
int pf;
struct SessionHandle *data = conn->data;
*waitp = 0; /* don't wait, we have the response now */
/*
* Check if a limited name resolve has been requested.
*/
switch (data->set.ip_version)
{
case CURL_IPRESOLVE_V4:
pf = PF_INET;
break;
case CURL_IPRESOLVE_V6:
pf = PF_INET6;
break;
default:
pf = PF_UNSPEC;
break;
}
if (pf != PF_INET)
{
/* see if we have an IPv6 stack */
curl_socket_t s = socket(PF_INET6, SOCK_DGRAM, 0);
if (s == CURL_SOCKET_BAD)
{
/* Some non-IPv6 stacks have been found to make very slow name resolves
* when PF_UNSPEC is used, so thus we switch to a mere PF_INET lookup if
* the stack seems to be a non-ipv6 one. */
pf = PF_INET;
}
else
{
/* This seems to be an IPv6-capable stack, use PF_UNSPEC for the widest
* possible checks. And close the socket again.
*/
sclose(s);
}
}
MEMSET(&hints, 0, sizeof(hints));
hints.ai_family = pf;
hints.ai_socktype = conn->socktype;
if ((1 == Curl_inet_pton(AF_INET, hostname, addrbuf)) ||
(1 == Curl_inet_pton(AF_INET6, hostname, addrbuf)))
{
/* the given address is numerical only, prevent a reverse lookup */
hints.ai_flags = AI_NUMERICHOST;
}
#ifdef HAVE_GSSAPI
if (conn->data->set.krb)
/* if krb is used, we (might) need the canonical host name */
hints.ai_flags |= AI_CANONNAME;
#endif
if (port)
{
snprintf(sbuf, sizeof(sbuf), "%d", port);
sbufptr = sbuf;
}
error = Curl_getaddrinfo_ex(hostname, sbufptr, &hints, &res);
if (error)
{
infof(data, "getaddrinfo(3) failed for %s:%d\n", hostname, port);
return NULL;
}
dump_addrinfo(conn, res);
return res;
}
int main(int argc, char ** argv)
{
int result;
fd_set read_fd;
struct addrinfo * p_group_address;
struct addrinfo * p_iface_address;
struct addrinfo a_hints;
memset(&a_hints, 0, sizeof(a_hints));
SOCKET s = socket(AF_INET, SOCK_DGRAM, 0);
assert(s>=0);
a_hints.ai_family = AF_INET;
a_hints.ai_protocol = 0;
a_hints.ai_socktype = SOCK_DGRAM;
result = getaddrinfo(MCAST_GROUP_ADDRESS, MCAST_PORT_NUMBER, &a_hints, &p_group_address);
assert(0 == result);
dump_addrinfo(stderr, p_group_address);
a_hints.ai_flags = AI_PASSIVE;
result = getaddrinfo(INTEFACE_BIND_ADDRESS, MCAST_PORT_NUMBER, &a_hints, &p_iface_address);
assert(0 == result);
result = set_reuse_addr(s);
assert(0 == result);
dump_addrinfo(stderr, p_iface_address);
result = join_mcast_group_set_ttl(s, p_group_address, p_iface_address, DEFAULT_TTL);
assert(0 == result);
{
struct sigaction query_action;
memset(&query_action, 0, sizeof(query_action));
query_action.sa_handler = &sigint_handle;
if (sigaction (SIGINT, NULL, &query_action) < 0)
exit(EXIT_FAILURE);
/* sigaction returns -1 in case of error. */
}
while (!g_stop_processing)
{
ssize_t bytes_read;
struct sockaddr recv_from_data;
socklen_t recv_from_length = sizeof(recv_from_data);
struct timeval select_timeout = { 1, 0 };
FD_ZERO(&read_fd);
FD_SET(s, &read_fd);
result = select(s+1, &read_fd, NULL, NULL, &select_timeout);
switch (result)
{
case -1:
break;
case 0:
fprintf(stdout, "%4.4u %s : Timeout\n", __LINE__, __func__);
break;
default:
if (FD_ISSET(s, &read_fd))
{
bytes_read = recvfrom(s,
&g_input_buffer[0],
sizeof(g_input_buffer),
0,
&recv_from_data,
&recv_from_length);
if (bytes_read >= 0)
{
fprintf(stdout, "%4.4u %s : %u %s %u %2.2hhx %2.2hhx..\n", __LINE__, __func__, bytes_read,
inet_ntoa((((struct sockaddr_in *)&recv_from_data)->sin_addr)),
ntohs((((struct sockaddr_in *)&recv_from_data)->sin_port)),
g_input_buffer[0],
g_input_buffer[1]
);
}
else
{
fprintf(stderr, "%4.4u %s : %d %s\n", __LINE__, __func__, errno, strerror(errno));
}
}
break;
}
}
return 0;
}
SOCKET
establish_listen(char *hostname, char *service, int af, netperf_socklen_t *addrlenp)
{
SOCKET sockfd;
int error;
int count;
int len = *addrlenp;
int one = 1;
struct addrinfo hints, *res, *res_temp;
if (debug) {
fprintf(stderr,
"establish_listen: host '%s' service '%s' af %d socklen %d\n",
hostname ? hostname : "n/a",
service ? service : "n/a",
af,
len);
fflush(stderr);
}
memset(&hints, 0, sizeof(hints));
hints.ai_family = af;
hints.ai_socktype = SOCK_STREAM;
hints.ai_flags = AI_PASSIVE;
count = 0;
do {
error = getaddrinfo(hostname,
service,
&hints,
&res);
count += 1;
if (error == EAI_AGAIN) {
if (debug) {
fprintf(stderr,"Sleeping on getaddrinfo EAI_AGAIN\n");
fflush(stderr);
}
usleep(1000);
}
} while ((error == EAI_AGAIN) && (count <= 5));
if (error) {
fprintf(stderr,
"establish_listen: could not resolve host '%s' service '%s'\n",
hostname,service);
fprintf(stderr,"\tgetaddrinfo returned %d %s\n",
error,gai_strerror(error));
fflush(stderr);
return(-1);
}
if (debug) {
dump_addrinfo(stderr, res, hostname,
service, AF_UNSPEC);
}
res_temp = res;
do {
sockfd = socket(res_temp->ai_family,
res_temp->ai_socktype,
res_temp->ai_protocol);
if (sockfd == INVALID_SOCKET) {
if (debug) {
fprintf(stderr,"establish_listen: socket error trying next one\n");
fflush(stderr);
}
continue;
}
/* The Windows DDK compiler is quite picky about pointers so we
cast one as a void to placate it. */
if (setsockopt(sockfd,SOL_SOCKET,SO_REUSEADDR,(void *)&one,sizeof(one)) ==
SOCKET_ERROR) {
fprintf(stderr,"establish_listen: SO_REUSEADDR failed\n");
fflush(stderr);
}
if (bind(sockfd, res_temp->ai_addr, res_temp->ai_addrlen) == 0) {
break;
}
fprintf(stderr,"establish_listen: bind error close and try next\n");
fflush(stderr);
CLOSE_SOCKET(sockfd);
} while ( (res_temp = res_temp->ai_next) != NULL );
if (res_temp == NULL) {
fprintf(stderr,"establish_listen: allocate server socket failed\n");
fflush(stderr);
sockfd = -1;
} else if (listen (sockfd,20) == -1) {
fprintf(stderr,"establish_listen: setting the listen backlog failed\n");
fflush(stderr);
CLOSE_SOCKET(sockfd);
sockfd = -1;
} else {
if (addrlenp) *addrlenp = res_temp->ai_addrlen;
}
fcntl(sockfd,F_SETFL, O_NONBLOCK);
freeaddrinfo(res);
return (sockfd);
}
