DlgRecording::DlgRecording(QWidget* parent, UserSettingsPointer pConfig,
Library* pLibrary, TrackCollection* pTrackCollection,
RecordingManager* pRecordingManager, KeyboardEventFilter* pKeyboard)
: QWidget(parent),
m_pConfig(pConfig),
m_pTrackCollection(pTrackCollection),
m_browseModel(this, m_pTrackCollection, pRecordingManager),
m_proxyModel(&m_browseModel),
m_bytesRecordedStr("--"),
m_durationRecordedStr("--:--"),
m_pRecordingManager(pRecordingManager) {
setupUi(this);
m_pTrackTableView = new WTrackTableView(this, pConfig, m_pTrackCollection, true);
m_pTrackTableView->installEventFilter(pKeyboard);
connect(m_pTrackTableView, SIGNAL(loadTrack(TrackPointer)),
this, SIGNAL(loadTrack(TrackPointer)));
connect(m_pTrackTableView, SIGNAL(loadTrackToPlayer(TrackPointer, QString, bool)),
this, SIGNAL(loadTrackToPlayer(TrackPointer, QString, bool)));
connect(pLibrary, SIGNAL(setTrackTableFont(QFont)),
m_pTrackTableView, SLOT(setTrackTableFont(QFont)));
connect(pLibrary, SIGNAL(setTrackTableRowHeight(int)),
m_pTrackTableView, SLOT(setTrackTableRowHeight(int)));
connect(m_pRecordingManager, SIGNAL(isRecording(bool)),
this, SLOT(slotRecordingEnabled(bool)));
connect(m_pRecordingManager, SIGNAL(bytesRecorded(int)),
this, SLOT(slotBytesRecorded(int)));
connect(m_pRecordingManager, SIGNAL(durationRecorded(QString)),
this, SLOT(slotDurationRecorded(QString)));
QBoxLayout* box = dynamic_cast<QBoxLayout*>(layout());
VERIFY_OR_DEBUG_ASSERT(box) { //Assumes the form layout is a QVBox/QHBoxLayout!
} else {
void WRecordingDuration::setup(const QDomNode& node, const SkinContext& context) {
WLabel::setup(node, context);
connect(m_pRecordingManager, SIGNAL(durationRecorded(QString)),
this, SLOT(refreshLabel(QString)));
connect(m_pRecordingManager, SIGNAL(isRecording(bool)),
this, SLOT(slotRecordingInactive(bool)));
// When we're recording show text from "InactiveText" node
QString inactiveText;
if (context.hasNodeSelectString(node, "InactiveText", &inactiveText)) {
m_inactiveText = inactiveText;
} else {
m_inactiveText = QString("--:--");
}
// Set inactiveText here already because slotRecordingInactive
// is refreshed first when we start recording
setText(m_inactiveText);
}
void EngineRecord::process(const CSAMPLE* pBuffer, const int iBufferSize) {
float recordingStatus = m_pRecReady->get();
if (recordingStatus == RECORD_OFF) {
//qDebug("Setting record flag to: OFF");
if (fileOpen()) {
Event::end("EngineRecord recording");
closeFile(); // Close file and free encoder.
if (m_bCueIsEnabled) {
closeCueFile();
}
emit(isRecording(false, false));
}
} else if (recordingStatus == RECORD_READY) {
// If we are ready for recording, i.e, the output file has been selected, we
// open a new file.
updateFromPreferences(); // Update file location from preferences.
if (openFile()) {
Event::start("EngineRecord recording");
qDebug("Setting record flag to: ON");
m_pRecReady->set(RECORD_ON);
emit(isRecording(true, false)); // will notify the RecordingManager
// Since we just started recording, timeout and clear the metadata.
m_iMetaDataLife = kMetaDataLifeTimeout;
m_pCurrentTrack.reset();
// clean frames couting and get current sample rate.
m_frames = 0;
m_sampleRate = m_pSamplerate->get();
if (m_bCueIsEnabled) {
openCueFile();
m_cueTrack = 0;
}
} else { // Maybe the encoder could not be initialized
qDebug() << "Could not open" << m_fileName << "for writing.";
qDebug("Setting record flag to: OFF");
m_pRecReady->slotSet(RECORD_OFF);
// An error occurred.
emit(isRecording(false, true));
}
} else if (recordingStatus == RECORD_SPLIT_CONTINUE) {
if (fileOpen()) {
closeFile(); // Close file and free encoder.
if (m_bCueIsEnabled) {
closeCueFile();
}
}
updateFromPreferences(); // Update file location from preferences.
if (openFile()) {
qDebug() << "Splitting to a new file: "<< m_fileName;
m_pRecReady->set(RECORD_ON);
emit(isRecording(true, false)); // will notify the RecordingManager
// Since we just started recording, timeout and clear the metadata.
m_iMetaDataLife = kMetaDataLifeTimeout;
m_pCurrentTrack.reset();
// clean frames counting and get current sample rate.
m_frames = 0;
m_sampleRate = m_pSamplerate->get();
m_recordedDuration = 0;
if (m_bCueIsEnabled) {
openCueFile();
m_cueTrack = 0;
}
} else { // Maybe the encoder could not be initialized
qDebug() << "Could not open" << m_fileName << "for writing.";
Event::end("EngineRecord recording");
qDebug("Setting record flag to: OFF");
m_pRecReady->slotSet(RECORD_OFF);
// An error occurred.
emit(isRecording(false, true));
}
}
// Checking again from m_pRecReady since its status might have changed
// in the previous "if" blocks.
if (m_pRecReady->get() == RECORD_ON) {
// Compress audio. Encoder will call method 'write()' below to
// write a file stream and emit bytesRecorded.
m_pEncoder->encodeBuffer(pBuffer, iBufferSize);
//Writing cueLine before updating the time counter since we preffer to be ahead
//rather than late.
if (m_bCueIsEnabled && metaDataHasChanged()) {
m_cueTrack++;
writeCueLine();
m_cueFile.flush();
}
// update frames counting and recorded duration (seconds)
m_frames += iBufferSize / 2;
unsigned long lastDuration = m_recordedDuration;
m_recordedDuration = m_frames / m_sampleRate;
// gets recorded duration and emit signal that will be used
// by RecordingManager to update the label besides start/stop button
if (lastDuration != m_recordedDuration) {
emit(durationRecorded(m_recordedDuration));
}
}
}
void EngineRecord::process(const CSAMPLE* pBuffer, const int iBufferSize) {
float recordingStatus = m_pRecReady->get();
if (recordingStatus == RECORD_OFF) {
//qDebug("Setting record flag to: OFF");
if (fileOpen()) {
Event::end("EngineRecord recording");
closeFile(); // Close file and free encoder.
emit(isRecording(false));
}
} else if (recordingStatus == RECORD_READY) {
// If we are ready for recording, i.e, the output file has been selected, we
// open a new file.
updateFromPreferences(); // Update file location from preferences.
if (openFile()) {
Event::start("EngineRecord recording");
qDebug("Setting record flag to: ON");
m_pRecReady->set(RECORD_ON);
emit(isRecording(true)); // will notify the RecordingManager
// Since we just started recording, timeout and clear the metadata.
m_iMetaDataLife = kMetaDataLifeTimeout;
m_pCurrentTrack = TrackPointer();
// clean frames couting and get current sample rate.
m_frames = 0;
m_sampleRate = m_pSamplerate->get();
if (m_bCueIsEnabled) {
openCueFile();
m_cueTrack = 0;
}
} else { // Maybe the encoder could not be initialized
qDebug("Setting record flag to: OFF");
m_pRecReady->slotSet(RECORD_OFF);
emit(isRecording(false));
}
} else if (recordingStatus == RECORD_ON) {
// If recording is enabled process audio to compressed or uncompressed data.
if (m_encoding == ENCODING_WAVE || m_encoding == ENCODING_AIFF) {
if (m_pSndfile != NULL) {
sf_write_float(m_pSndfile, pBuffer, iBufferSize);
emit(bytesRecorded(iBufferSize * 2));
}
} else {
if (m_pEncoder) {
// Compress audio. Encoder will call method 'write()' below to
// write a file stream
m_pEncoder->encodeBuffer(pBuffer, iBufferSize);
}
}
// update frames counting and recorded duration (seconds)
m_frames += iBufferSize / 2;
unsigned long lastDuration = m_recordedDuration;
m_recordedDuration = m_frames / m_sampleRate;
// gets recorded duration and emit signal that will be used
// by RecordingManager to update the label besides start/stop button
if (lastDuration != m_recordedDuration) {
emit(durationRecorded(getRecordedDurationStr()));
}
if (m_bCueIsEnabled) {
if (metaDataHasChanged()) {
m_cueTrack++;
writeCueLine();
m_cueFile.flush();
}
}
}
}