static int at91sam9m10ihd_devices_init(void)
{
ek_add_device_w1();
ek_add_device_nand();
ek_add_device_eth();
ek_add_device_mci();
ek_add_device_spi();
ek_add_device_i2c();
ek_add_device_usb();
ek_add_device_lcd();
devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
devfs_add_partition("nand0", SZ_128K, SZ_256K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_256K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
devfs_add_partition("nand0", SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
dev_add_bb_dev("env_raw1", "env1");
/*
* The internal Atmel kernel use the SAM9M10G45EK machine id
* The mainline use DT
*/
armlinux_set_architecture(MACH_TYPE_AT91SAM9M10G45EK);
return 0;
}
static void __init at91_dt_device_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
/* NAND */
ek_add_device_nand();
}
static void __init ek_board_init(void)
{
/* Serial */
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
/* USB Device */
at91_add_device_udc(&ek_udc_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
/* NAND */
ek_add_device_nand();
/* DM9000 ethernet */
ek_add_device_dm9000();
/* spi0 and mmc/sd share the same PIO pins */
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* Touchscreen */
ek_add_device_ts();
/* SSC (to AT73C213) */
at73c213_set_clk(&at73c213_data);
at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX);
#else
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
#endif
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
/* Push Buttons */
ek_add_device_buttons();
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
}
static void __init ek_board_init(void)
{
/* Serial */
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
/* USB Device */
at91_add_device_udc(&ek_udc_data);
/* SPI */
at91_set_gpio_output(AT91_PIN_PE20, 1); /* select spi0 clock */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* Touchscreen */
ek_add_device_ts();
/* MMC */
at91_add_device_mmc(1, &ek_mmc_data);
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* NAND */
ek_add_device_nand();
/* I2C */
at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
/* Push Buttons */
ek_add_device_buttons();
/* AC97 */
at91_add_device_ac97(&ek_ac97_data);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
/* CAN */
at91_add_device_can(&ek_can_data);
}
static void __init ek_board_init(void)
{
/* Serial */
at91_add_device_serial();
/* USB HS */
at91_add_device_usba(&ek_usba_udc_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
/* NAND */
ek_add_device_nand();
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
/* AC97 */
at91_add_device_ac97(&ek_ac97_data);
/* Touch Screen Controller */
at91_add_device_tsadcc(&ek_tsadcc_data);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* Push Buttons */
ek_add_device_buttons();
}
static void __init ek_board_init(void)
{
at91_add_device_serial();
at91_add_device_usbh(&ek_usbh_data);
ek_add_device_udc();
ek_add_device_spi();
ek_add_device_eth();
ek_add_device_nand();
ek_add_device_buttons();
ek_add_device_leds();
if (machine_is_usb_a9g20()) {
at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
} else {
at91_add_device_i2c(NULL, 0);
at91_shdwc_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10)
| AT91_SHDW_WKMODE0_LOW
| AT91_SHDW_RTTWKEN);
}
}
static int at91sam9261ek_devices_init(void)
{
ek_add_device_nand();
ek_add_device_dm9000();
ek_add_device_udc();
ek_add_device_buttons();
ek_device_add_leds();
devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
devfs_add_partition("nand0", SZ_128K, SZ_256K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_256K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
devfs_add_partition("nand0", SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
dev_add_bb_dev("env_raw1", "env1");
armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
if (machine_is_at91sam9g10ek())
armlinux_set_architecture(MACH_TYPE_AT91SAM9G10EK);
else
armlinux_set_architecture(MACH_TYPE_AT91SAM9261EK);
return 0;
}
static int at91sam9n12ek_devices_init(void)
{
ek_add_device_spi();
ek_add_device_nand();
ek_add_device_mci();
ek_add_led();
at91_add_device_udc(&ek_udc_data);
ek_add_device_i2c();
ek_add_device_ks8851();
ek_add_device_buttons();
ek_add_device_lcdc();
armlinux_set_architecture(CONFIG_MACH_AT91SAM9N12EK);
devfs_add_partition("nand0", 0x00000, SZ_256K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
devfs_add_partition("nand0", SZ_256K, SZ_256K + SZ_128K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_512K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
devfs_add_partition("nand0", SZ_512K + SZ_256K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
dev_add_bb_dev("env_raw1", "env1");
return 0;
}
static int at91sam9x5ek_devices_init(void)
{
ek_add_device_w1();
ek_add_device_nand();
ek_add_device_eth();
ek_add_device_spi();
ek_add_device_mci();
ek_add_device_usb();
ek_add_led();
ek_add_device_i2c();
ek_add_device_lcdc();
armlinux_set_architecture(CONFIG_MACH_AT91SAM9X5EK);
devfs_add_partition("nand0", 0x00000, SZ_256K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
devfs_add_partition("nand0", SZ_256K, SZ_256K + SZ_128K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_512K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
devfs_add_partition("nand0", SZ_512K + SZ_256K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
dev_add_bb_dev("env_raw1", "env1");
if (IS_ENABLED(CONFIG_DEFAULT_ENVIRONMENT_GENERIC))
defaultenv_append_directory(defaultenv_at91sam9x5ek);
return 0;
}
static void __init ek_board_init(void)
{
/* Serial */
at91_add_device_serial();
/* USB HS Host */
at91_add_device_usbh_ohci(&ek_usbh_hs_data);
at91_add_device_usbh_ehci(&ek_usbh_hs_data);
/* USB HS Device */
at91_add_device_usba(&ek_usba_udc_data);
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* NAND */
ek_add_device_nand();
/* I2C */
at91_add_device_i2c(0, NULL, 0);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
/* Touch Screen */
at91_add_device_tsadcc(&ek_tsadcc_data);
/* Push Buttons */
ek_add_device_buttons();
/* AC97 */
at91_add_device_ac97(&ek_ac97_data);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
}
static void __init ek_board_init(void)
{
at91_add_device_serial();
at91_add_device_usba(&ek_usba_udc_data);
at91_add_device_i2c(NULL, 0);
ek_add_device_nand();
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
at91_add_device_mmc(0, &ek_mmc_data);
at91_add_device_lcdc(&ek_lcdc_data);
at91_add_device_ac97(&ek_ac97_data);
at91_add_device_tsadcc(&ek_tsadcc_data);
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
ek_add_device_buttons();
}
static void __init ek_board_init(void)
{
at91_add_device_serial();
at91_add_device_usbh(&ek_usbh_data);
at91_add_device_udc(&ek_udc_data);
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
ek_add_device_nand();
ek_add_device_macb();
ek_add_regulators();
ek_add_device_mmc();
at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
ek_add_device_gpio_leds();
ek_add_device_buttons();
at91_set_B_periph(AT91_PIN_PC1, 0);
at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
}
static void __init ek_board_init(void)
{
at91_add_device_serial();
at91_add_device_usbh(&ek_usbh_data);
at91_add_device_udc(&ek_udc_data);
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
ek_add_device_nand();
at91_add_device_eth(&ek_macb_data);
#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
at91_add_device_mci(0, &ek_mmc_data);
#else
at91_add_device_mmc(0, &ek_mmc_data);
#endif
at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
at91_set_B_periph(AT91_PIN_PC1, 0);
at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
}
static void __init ek_board_init(void)
{
at91_add_device_serial();
at91_add_device_usbh(&ek_usbh_data);
at91_add_device_udc(&ek_udc_data);
at91_add_device_i2c(NULL, 0);
ek_add_device_nand();
ek_add_device_dm9000();
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
ek_add_device_ts();
at73c213_set_clk(&at73c213_data);
at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX);
#else
at91_add_device_mmc(0, &ek_mmc_data);
#endif
at91_add_device_lcdc(&ek_lcdc_data);
ek_add_device_buttons();
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
}
static void __init ek_board_init(void)
{
at91_add_device_serial();
at91_add_device_usbh(&ek_usbh_data);
at91_add_device_udc(&ek_udc_data);
at91_set_gpio_output(AT91_PIN_PE20, 1);
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
ek_add_device_ts();
at91_add_device_mmc(1, &ek_mmc_data);
at91_add_device_eth(&ek_macb_data);
ek_add_device_nand();
at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
at91_add_device_lcdc(&ek_lcdc_data);
ek_add_device_buttons();
at91_add_device_ac97(&ek_ac97_data);
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
at91_add_device_can(&ek_can_data);
}
static void __init ek_board_init(void)
{
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB HS */
at91_add_device_usba(&ek_usba_udc_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
/* NAND */
ek_add_device_nand();
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* MMC (AT91_MCI Legacy Driver */
at91_add_device_mmc(0, &at91_mci0_data);
/* MMC */
at91_add_device_mci(0, &mci0_data);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
/* AC97 */
at91_add_device_ac97(&ek_ac97_data);
/* Touch Screen Controller */
at91_add_device_tsadcc(&ek_tsadcc_data);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* Push Buttons */
ek_add_device_buttons();
}
static int at91sam9m10g45ek_devices_init(void)
{
ek_add_device_nand();
ek_add_device_spi();
at91_add_device_eth(0, &macb_pdata);
ek_add_device_mci();
ek_add_device_usb();
ek_device_add_leds();
ek_device_add_keyboard();
ek_add_device_lcdc();
devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
devfs_add_partition("nand0", SZ_128K, SZ_256K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_256K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
devfs_add_partition("nand0", SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
dev_add_bb_dev("env_raw1", "env1");
armlinux_set_bootparams((void *)(AT91_CHIPSELECT_6 + 0x100));
armlinux_set_architecture(MACH_TYPE_AT91SAM9M10G45EK);
ek_set_board_revision();
return 0;
}
static void __init ek_board_init(void)
{
/* Serial */
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
/* USB Device */
at91_add_device_udc(&ek_udc_data);
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* NAND */
ek_add_device_nand();
/* I2C */
at91_add_device_i2c(NULL, 0);
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
/* Push Buttons */
ek_add_device_buttons();
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* shutdown controller, wakeup button (5 msec low) */
at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
| AT91_SHDW_RTTWKEN);
}
static int at91sam9260ek_devices_init(void)
{
ek_add_device_nand();
at91sam9260ek_phy_reset();
at91_add_device_eth(0, &macb_pdata);
at91_add_device_usbh_ohci(&ek_usbh_data);
at91_add_device_udc(&ek_udc_data);
ek_usb_add_device_mci();
ek_add_device_buttons();
ek_add_led();
armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
ek_set_board_type();
devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
devfs_add_partition("nand0", SZ_128K, SZ_256K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_256K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
devfs_add_partition("nand0", SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
dev_add_bb_dev("env_raw1", "env1");
return 0;
}
static void __init ek_board_init(void)
{
/* Serial */
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
/* USB Device */
at91_add_device_udc(&ek_udc_data);
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* NAND */
ek_add_device_nand();
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
/* I2C */
at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* SSC (to AT73C213) */
at73c213_set_clk(&at73c213_data);
at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* Push Buttons */
ek_add_device_buttons();
}
static void __init ek_board_init(void)
{
/* Serial */
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
/* USB Device */
at91_add_device_udc(&ek_udc_data);
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* NAND */
ek_add_device_nand();
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
/* I2C */
at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* Compact Flash */
at91_add_device_cf(&ek_cf_data);
/* SSC (to AT73C213) */
at73c213_set_clk(&at73c213_data);
at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* Push Buttons */
ek_add_device_buttons();
/* shutdown controller, wakeup button (5 msec low) */
at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
| AT91_SHDW_RTTWKEN);
}
static void __init ek_board_init(void)
{
/* Serial */
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
/* USB Device */
at91_add_device_udc(&ek_udc_data);
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* NAND */
ek_add_device_nand();
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
/* I2C */
at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* Push Buttons */
ek_add_device_buttons();
/* PCK0 provides MCLK to the WM8731 */
at91_set_B_periph(AT91_PIN_PC1, 0);
/* SSC (for WM8731) */
at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
}
static void __init ek_board_init(void)
{
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
/* USB Device */
ek_add_device_udc();
/* SPI */
ek_add_device_spi();
/* Ethernet */
ek_add_device_eth();
/* NAND */
ek_add_device_nand();
/* Push Buttons */
ek_add_device_buttons();
/* LEDs */
ek_add_device_leds();
if (machine_is_usb_a9g20()) {
/* I2C */
at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
} else {
/* I2C */
at91_add_device_i2c(NULL, 0);
/* shutdown controller, wakeup button (5 msec low) */
at91_shdwc_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10)
| AT91_SHDW_WKMODE0_LOW
| AT91_SHDW_RTTWKEN);
}
}
static void __init ek_board_init(void)
{
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
/* USB Device */
at91_add_device_udc(&ek_udc_data);
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* NAND */
ek_add_device_nand();
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
at91_add_device_mci(0, &ek_mci0_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
}
/*
static char tft_type = 's';
static int __init ek_tft_setup(char *str)
{
tft_type = str[0];
return 1;
}
__setup("tft=", ek_tft_setup);
*/
static void __init ek_board_init(void)
{/*
int default_display = 0;
switch (tft_type) {
case 's': // small or production
default_display = 0;
break;
case 'm': // middle
default_display = 1;
break;
case 'b': // big
default:
default_display = 2;
break;
}
ek_fb_set_platdata(default_display);*/
/* Serial */
at91_add_device_serial();
/* USB HS Host */
at91_add_device_usbh_ohci(&ek_usbh_hs_data);
at91_add_device_usbh_ehci(&ek_usbh_hs_data);
/* USB HS Device */
at91_add_device_usba(&ek_usba_udc_data);
/* MMC */
#if 0
at91_add_device_mci(0, &mci0_data);
at91_add_device_mci(1, &mci1_data);
#endif
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
#if 1
/* DM9000 ethernet */
ek_add_device_dm9000();
#endif
/* NAND */
ek_add_device_nand();
/* SPI */
at91_add_device_spi(ek_spi0_devices, ARRAY_SIZE(ek_spi0_devices));
/* I2C */
at91_add_device_i2c(0, ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* LCD Controller */
//at91_add_device_lcdc(&ek_lcdc_data);
/* Touch Screen */
//at91_add_device_tsadcc(&ek_tsadcc_data);
/* Push Buttons */
ek_add_device_buttons();
/* AC97 */
//at91_add_device_ac97(&ek_ac97_data);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
#if 0
/* CF */
at91_add_device_cf(&at91sam9g45ek_cf_data);
#endif
}
static int sama5d3_xplained_devices_init(void)
{
ek_add_device_nand();
ek_add_led();
ek_add_device_eth();
ek_add_device_mci();
devfs_create_partitions("nand0", sama5d3_xplained_nand0_partitions);
return 0;
}
static int at91sam9m10g45ek_devices_init(void)
{
ek_add_device_nand();
at91_add_device_eth(&macb_pdata);
ek_add_device_mci();
devfs_add_partition("nand0", 0x00000, 0x80000, PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", 0x80000, 0x20000, PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
armlinux_set_bootparams((void *)(AT91_CHIPSELECT_6 + 0x100));
armlinux_set_architecture(MACH_TYPE_AT91SAM9M10G45EK);
ek_set_board_revision();
return 0;
}
static void __init ek_board_init(void)
{
/* Serial */
/* DGBU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
/* USART0 not connected on the -EK board */
/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB HS Host */
at91_add_device_usbh_ohci(&ek_usbh_hs_data);
at91_add_device_usbh_ehci(&ek_usbh_hs_data);
/* USB HS Device */
at91_add_device_usba(&ek_usba_udc_data);
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* MMC */
at91_add_device_mci(0, &mci0_data);
at91_add_device_mci(1, &mci1_data);
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* NAND */
ek_add_device_nand();
/* I2C */
at91_add_device_i2c(0, NULL, 0);
/* ISI, using programmable clock as ISI_MCK */
at91_add_device_isi(&isi_data, true);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
/* Touch Screen */
at91_add_device_tsadcc(&ek_tsadcc_data);
/* ADC */
at91_add_device_adc(&ek_adc_data);
/* Push Buttons */
ek_add_device_buttons();
/* AC97 */
at91_add_device_ac97(&ek_ac97_data);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
/* Other platform devices */
platform_add_devices(devices, ARRAY_SIZE(devices));
}
static void __init ek_board_init(void)
{
/* Serial */
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
/* USB Device */
at91_add_device_udc(&ek_udc_data);
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* NAND */
ek_add_device_nand();
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
}
static void __init ek_board_init(void)
{
/* */
at91_add_device_serial();
/* */
at91_add_device_usbh(&ek_usbh_data);
/* */
at91_add_device_udc(&ek_udc_data);
/* */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* */
ek_add_device_nand();
/* */
at91_add_device_eth(&ek_macb_data);
/* */
at91_add_device_mmc(0, &ek_mmc_data);
/* */
at91_add_device_i2c(NULL, 0);
}