static int
btn_check_reset(void)
{
unsigned int i_button_value = !BTN_PRESSED;
#if defined (BOARD_GPIO_LED_POWER)
int i_led;
#endif
#if defined (BOARD_GPIO_BTN_WPS)
/* check WPS pressed */
if (btn_count_wps > 0)
return 0;
#endif
#if defined (BOARD_GPIO_BTN_WLTOG)
/* check WLTOG pressed */
if (btn_count_wlt > 0)
return 0;
#endif
if (cpu_gpio_get_pin(BOARD_GPIO_BTN_RESET, &i_button_value) < 0)
return 0;
if (i_button_value == BTN_PRESSED) {
/* "RESET" pressed */
btn_count_reset++;
#if defined (BOARD_GPIO_LED_POWER)
/* flash power LED */
i_led = get_state_led_pwr();
if (btn_count_reset == 1)
cpu_gpio_set_pin(BOARD_GPIO_LED_POWER, i_led);
else if (btn_count_reset > BTN_RESET_WAIT_COUNT) {
cpu_gpio_set_pin(BOARD_GPIO_LED_POWER, (btn_count_reset % 2) ? !i_led : i_led);
dbg("You can release RESET button now!\n");
}
#endif
} else {
/* "RESET" released */
int press_count = btn_count_reset;
btn_count_reset = 0;
if (press_count > BTN_RESET_WAIT_COUNT) {
/* pressed >= 5sec, reset! */
wd_alarmtimer(0, 0);
#if defined (BOARD_GPIO_LED_POWER)
cpu_gpio_set_pin(BOARD_GPIO_LED_POWER, LED_OFF);
#endif
erase_nvram();
erase_storage();
sys_exit();
} else if (press_count > 0) {
#if defined (BOARD_GPIO_LED_POWER)
LED_CONTROL(BOARD_GPIO_LED_POWER, LED_ON);
#endif
}
}
return (i_button_value != BTN_PRESSED) ? 0 : 1;
}
uint32_t write_storage(teDATASTORAGE stype, uint32_t addr, void *data, uint16_t size)
{
uint32_t ret_len;
switch(stype)
{
case STORAGE_MAC:
#ifndef __USE_EXT_EEPROM__
erase_storage(STORAGE_MAC);
ret_len = write_flash(DEVICE_MAC_ADDR, data, 6); // internal data flash for configuration data (DAT0/1)
#else
//erase_storage(STORAGE_MAC);
ret_len = write_eeprom(convert_eeprom_addr(DEVICE_MAC_ADDR), data, 6); // external eeprom for configuration data
#ifdef _EEPROM_DEBUG_
dump_eeprom_block(convert_eeprom_addr(DEVICE_MAC_ADDR));
#endif
#endif
break;
case STORAGE_CONFIG:
#ifndef __USE_EXT_EEPROM__ // flash
erase_storage(STORAGE_CONFIG);
ret_len = write_flash(DEVICE_CONFIG_ADDR, data, size); // internal data flash for configuration data (DAT0/1)
#else
//erase_storage(STORAGE_CONFIG);
ret_len = write_eeprom(convert_eeprom_addr(DEVICE_CONFIG_ADDR), data, size); // external eeprom for configuration data
#ifdef _EEPROM_DEBUG_
dump_eeprom_block(convert_eeprom_addr(DEVICE_CONFIG_ADDR));
#endif
#endif
break;
case STORAGE_APP_MAIN:
ret_len = write_flash(addr, data, size);
break;
case STORAGE_APP_BACKUP:
ret_len = write_flash(addr, data, size);
break;
default:
break;
}
return ret_len;
}
void erasePersistentStorage()
{
erase_storage();
}
void
ez_event_long(int btn_id)
{
int ez_action, ez_param = 2;
#if defined (BOARD_GPIO_BTN_WLTOG)
if (btn_id == 1) {
ez_action = nvram_get_int("wlt_action_long");
ez_param = 4;
} else
#endif
ez_action = nvram_get_int("ez_action_long");
#if defined (BOARD_GPIO_LED_POWER)
int led_state = LED_ON;
switch (ez_action)
{
case 7: // Router reboot
case 8: // Router shutdown
led_state = LED_OFF;
break;
case 11: // Front LED toggle
led_state = -1;
break;
}
if (led_state >= 0)
LED_CONTROL(BOARD_GPIO_LED_POWER, led_state);
#endif
switch (ez_action)
{
case 1: // WiFi 2.4GHz force Enable/Disable trigger
ez_action_change_wifi2();
break;
case 2: // WiFi 5GHz force Enable/Disable trigger
ez_action_change_wifi5();
break;
case 3: // WiFi 2.4 & 5GHz force Enable/Disable trigger
ez_action_change_wifi2();
ez_action_change_wifi5();
break;
case 4: // Safe removal all USB
ez_action_usb_saferemoval();
break;
case 5: // WAN down
ez_action_wan_down();
break;
case 6: // WAN reconnect
ez_action_wan_reconnect();
break;
case 7: // Router reboot
sys_exit();
break;
case 8: // Router shutdown
ez_action_shutdown();
break;
case 9: // WAN up/down toggle
ez_action_wan_toggle();
break;
case 10: // Run user script
ez_action_user_script(ez_param);
break;
case 11: // Front LED toggle
ez_action_led_toggle();
break;
case 12: // WiFi AP Guest 2.4GHz Enable/Disable trigger
ez_action_change_guest_wifi2();
break;
case 13: // WiFi AP Guest 5GHz Enable/Disable trigger
ez_action_change_guest_wifi5();
break;
case 14: // WiFi AP Guest 2.4 & 5GHz Enable/Disable trigger
ez_action_change_guest_wifi2();
ez_action_change_guest_wifi5();
break;
case 15: // Reset settings
erase_nvram();
erase_storage();
sys_exit();
break;
}
}
static void
btn_check_reset(void)
{
unsigned int i_button_value = 1;
#if defined(BTN_WPS)
// check WPS pressed
if (btn_pressed_wps != 0) return;
#endif
if (cpu_gpio_get_pin(BTN_RESET, &i_button_value) < 0)
return;
// reset button is on low phase
if (!i_button_value)
{
// "RESET" pressed
if (!btn_pressed_reset)
{
btn_pressed_reset = 1;
btn_count_reset = 0;
alarmtimer(0, URGENT_PERIOD);
}
else
{ /* Whenever it is pushed steady */
if (++btn_count_reset > RESET_WAIT_COUNT)
{
dbg("You can release RESET button now!\n");
btn_pressed_reset = 2;
}
if (btn_pressed_reset == 2)
{
if (btn_count_reset % 2)
cpu_gpio_set_pin(LED_POWER, LED_OFF);
else
cpu_gpio_set_pin(LED_POWER, LED_ON);
}
}
}
else
{
// "RESET" released
if (btn_pressed_reset == 1)
{
// pressed < 5sec, cancel
btn_count_reset = 0;
btn_pressed_reset = 0;
LED_CONTROL(LED_POWER, LED_ON);
alarmtimer(NORMAL_PERIOD, 0);
}
else if (btn_pressed_reset == 2)
{
// pressed >= 5sec, reset!
LED_CONTROL(LED_POWER, LED_OFF);
alarmtimer(0, 0);
erase_nvram();
erase_storage();
sys_exit();
}
}
}
