void matrix_init_user(void)
{
ergodox_led_all_on();
rgblight_init();
rgblight_enable();
rgblight_setrgb(255, 0, 0);
for (int i = LED_BRIGHTNESS_HI; i > LED_BRIGHTNESS_LO; i--)
{
ergodox_led_all_set(i);
wait_ms(5);
}
rgblight_setrgb(255, 255, 0);
wait_ms(1000);
for (int i = LED_BRIGHTNESS_LO; i > 0; i--)
{
ergodox_led_all_set(i);
wait_ms(10);
}
rgblight_setrgb(0, 255, 255);
ergodox_led_all_off();
wait_ms(1000);
rgblight_effect_knight(50);
}
// keyboard initialization
void matrix_init_user() {
ergodox_led_all_on();
for (int i = LED_BRIGHTNESS_HI; i > LED_BRIGHTNESS_LO; i--) {
ergodox_led_all_set(i);
wait_ms(5);
}
wait_ms(1000);
for (int i = LED_BRIGHTNESS_LO; i > 0; i--) {
ergodox_led_all_set(i);
wait_ms(10);
}
ergodox_led_all_off();
}
// Runs constantly in the background, in a loop.
void matrix_scan_user(void)
{
uint8_t layer = biton32(layer_state);
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
switch (layer) {
case FMU:
ergodox_right_led_1_on();
break;
case PMQ:
ergodox_right_led_2_on();
break;
case PMN:
ergodox_right_led_3_on();
break;
default:
if(host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) {
ergodox_led_all_set(LED_BRIGHTNESS_HI);
ergodox_right_led_1_on();
}
else {
ergodox_board_led_off();
}
break;
}
};
void UltramodSetLeds(void)
{
#ifdef ERGODOX
ergodox_led_all_off();
// todo: Consider changing these so that they progress from left to right, or maybe right to left
switch (ultramod.machine.state)
{
case NORMAL_STATE:
break;
case HELD_STATE:
case MOMENTARY_STATE:
ergodox_right_led_3_on(); // Blue
break;
case ONE_SHOT_STATE:
ergodox_right_led_2_on(); // Green
break;
case LOCKED_STATE:
ergodox_right_led_1_on(); // Red
break;
}
// Something seems to keep resetting the brightness
ergodox_led_all_set(LED_BRIGHTNESS_LO);
#endif // ERGODOX
}
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
// Dim the LEDs as much as possible
ergodox_led_all_set(0);
// Show the active layer number as binary bits in the LEDs.
// Note that LED1 is left-most, so bit1 -> LED3 and bit3 -> LED1
if (layer & 0b001) {
ergodox_right_led_3_on();
} else {
ergodox_right_led_3_off();
}
if (layer & 0b010) {
ergodox_right_led_2_on();
} else {
ergodox_right_led_2_off();
}
// Show caps lock on the left most LED.
// (Double-tap left shift to toggle caps lock)
if (host_keyboard_leds() & (1 << USB_LED_CAPS_LOCK)) {
ergodox_right_led_1_on();
} else {
ergodox_right_led_1_off();
}
}
void ergodox_blink_all_leds(void)
{
ergodox_led_all_off();
ergodox_led_all_set(LED_BRIGHTNESS_HI);
ergodox_led_all_on();
_delay_ms(333);
ergodox_led_all_off();
}
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
ergodox_led_all_off();
ergodox_led_all_set(LED_BRIGHTNESS_LO);
switch (layer) {
case BASE:
current_layer = BASE;
break;
case KEYPAD:
current_layer = KEYPAD;
break;
default:
// none
break;
}
// layer leds
if (current_layer == KEYPAD) {
ergodox_right_led_3_on();
}
// capslock
if (host_keyboard_leds() & (3<<USB_LED_CAPS_LOCK)) {
ergodox_right_led_1_on();
}
// Temporary leds
// The function layer takes over other layers and we need to reflect that on the leds.
// If the current layer is the BASE, we simply turn on the FN led, but if the current
// layer is the KEYPAD, than we must turn it off before turning on the FN led.
if (layer == FN && !has_oneshot_layer_timed_out()) {
ergodox_right_led_3_off();
ergodox_right_led_2_on();
}
// if the shifted is pressed I show the case led in a brighter color. This is nice to
// differenciate the shift from the capslock.
// Notice that I make sure that we're not using the shift on a chord shortcut (pressing
// shift togather with other modifiers).
if((keyboard_report->mods & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) && // is shift pressed and there is no other
!(keyboard_report->mods & (~MOD_BIT(KC_LSFT) & ~MOD_BIT(KC_RSFT)))) || // modifier being pressed as well
(get_oneshot_mods() & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) && !has_oneshot_mods_timed_out())) { // or the one shot shift didn't timed out
ergodox_right_led_1_set(LED_BRIGHTNESS_HI);
ergodox_right_led_1_on();
}
};
void ergodox_blink_all_leds(void)
{
ergodox_led_all_off();
ergodox_led_all_set(LED_BRIGHTNESS_HI);
ergodox_right_led_1_on();
_delay_ms(50);
ergodox_right_led_2_on();
_delay_ms(50);
ergodox_right_led_3_on();
_delay_ms(50);
ergodox_right_led_1_off();
_delay_ms(50);
ergodox_right_led_2_off();
_delay_ms(50);
ergodox_right_led_3_off();
//ergodox_led_all_on();
//_delay_ms(333);
ergodox_led_all_off();
}
