int main( int argc, char **argv ){
register site *s;
int i,si;
int prompt;
double dtime;
su3_vector **eigVec ;
su3_vector *tmp ;
double *eigVal ;
int total_R_iters ;
double chirality ;
initialize_machine(&argc,&argv);
#ifdef HAVE_QDP
QDP_initialize(&argc, &argv);
#ifndef QDP_PROFILE
QDP_profcontrol(0);
#endif
#endif
/* Remap standard I/O */
if(remap_stdio_from_args(argc, argv) == 1)terminate(1);
g_sync();
/* set up */
prompt = setup();
/* loop over input sets */
while( readin(prompt) == 0){
dtime = -dclock();
invalidate_all_ferm_links(&fn_links);
make_path_table(&ks_act_paths, &ks_act_paths_dmdu0);
/* Load fat and long links for fermion measurements if needed */
load_ferm_links(&fn_links, &ks_act_paths);
/* call fermion_variable measuring routines */
/* results are printed in output file */
f_meas_imp( F_OFFSET(phi), F_OFFSET(xxx), mass,
&fn_links, &fn_links_dmdu0);
eigVal = (double *)malloc(Nvecs*sizeof(double));
eigVec = (su3_vector **)malloc(Nvecs*sizeof(su3_vector*));
for(i=0;i<Nvecs;i++)
eigVec[i]=
(su3_vector*)malloc(sites_on_node*sizeof(su3_vector));
total_R_iters=Kalkreuter(eigVec, eigVal, eigenval_tol,
error_decr, Nvecs, MaxIter, Restart,
Kiters, EVEN, &fn_links) ;
tmp = (su3_vector*)malloc(sites_on_node*sizeof(su3_vector));
for(i=0;i<Nvecs;i++)
{
/* Construct to odd part of the vector. *
* Note that the true odd part of the eigenvector is *
* i/sqrt(eigVal) Dslash Psi. But since I only compute *
* the chirality the i factor is irrelevant (-i)*i=1!! */
dslash_fn_field(eigVec[i], tmp, ODD, &fn_links) ;
FORSOMEPARITY(si,s,ODD){
scalar_mult_su3_vector( &(tmp[si]),
1.0/sqrt(eigVal[i]),
&(eigVec[i][si]) ) ;
}
measure_chirality(eigVec[i], &chirality, EVENANDODD);
/* Here I divide by 2 since the EVEN vector is normalized to
* 1. The EVENANDODD vector is normalized to 2. I could have
* normalized the EVENANDODD vector to 1 and then not devide
* by to. The measure_chirality routine assumes vectors
* normalized to 1. */
node0_printf("Chirality(%i): %g\n",i,chirality/2) ;
}
free(tmp);
/**
for(i=0;i<Nvecs;i++)
{
sprintf(label,"DENSITY(%i)",i) ;
print_densities(eigVec[i], label, ny/2,nz/2,nt/2, EVEN) ;
}
**/
for(i=0;i<Nvecs;i++)
free(eigVec[i]) ;
free(eigVec) ;
free(eigVal) ;
#ifdef FN
invalidate_all_ferm_links(&fn_links);
#endif
fflush(stdout);
node0_printf("RUNNING COMPLETED\n"); fflush(stdout);
dtime += dclock();
if(this_node==0){
printf("Time = %e seconds\n",dtime);
printf("total_iters = %d\n",total_iters);
printf("total Rayleigh iters = %d\n",total_R_iters);
}
fflush(stdout);
}
int
main( int argc, char **argv )
{
int meascount,traj_done;
int prompt;
int s_iters, avs_iters, avspect_iters, avbcorr_iters;
double dtime, dclock();
initialize_machine(&argc,&argv);
#ifdef HAVE_QDP
QDP_initialize(&argc, &argv);
#endif
/* Remap standard I/O */
if(remap_stdio_from_args(argc, argv) == 1)terminate(1);
g_sync();
/* set up */
prompt = setup();
// restore_random_state_scidac_to_site("randsave", F_OFFSET(site_prn));
// restore_color_vector_scidac_to_site("xxx1save", F_OFFSET(xxx1),1);
// restore_color_vector_scidac_to_site("xxx2save", F_OFFSET(xxx2),1);
/* loop over input sets */
while( readin(prompt) == 0) {
/* perform warmup trajectories */
dtime = -dclock();
for( traj_done=0; traj_done < warms; traj_done++ ){
update();
}
node0_printf("WARMUPS COMPLETED\n"); fflush(stdout);
/* perform measuring trajectories, reunitarizing and measuring */
meascount=0; /* number of measurements */
avspect_iters = avs_iters = avbcorr_iters = 0;
for( traj_done=0; traj_done < trajecs; traj_done++ ){
/* do the trajectories */
s_iters=update();
/* measure every "propinterval" trajectories */
if( (traj_done%propinterval)==(propinterval-1) ){
/* call gauge_variable fermion_variable measuring routines */
/* results are printed in output file */
rephase(OFF);
g_measure( );
rephase(ON);
/* Load fat and long links for fermion measurements */
load_ferm_links(&fn_links, &ks_act_paths);
#ifdef DM_DU0
load_ferm_links(&fn_links_dmdu0, &ks_act_paths_dmdu0);
#endif
/* Measure pbp, etc */
#ifdef ONEMASS
f_meas_imp(F_OFFSET(phi),F_OFFSET(xxx),mass, &fn_links,
&fn_links_dmdu0);
#else
f_meas_imp( F_OFFSET(phi1), F_OFFSET(xxx1), mass1,
&fn_links, &fn_links_dmdu0);
f_meas_imp( F_OFFSET(phi2), F_OFFSET(xxx2), mass2,
&fn_links, &fn_links_dmdu0);
#endif
/* Measure derivatives wrto chemical potential */
#ifdef D_CHEM_POT
#ifdef ONEMASS
Deriv_O6( F_OFFSET(phi1), F_OFFSET(xxx1), F_OFFSET(xxx2), mass,
&fn_links, &fn_links_dmdu0);
#else
Deriv_O6( F_OFFSET(phi1), F_OFFSET(xxx1), F_OFFSET(xxx2), mass1,
&fn_links, &fn_links_dmdu0);
Deriv_O6( F_OFFSET(phi1), F_OFFSET(xxx1), F_OFFSET(xxx2), mass2,
&fn_links, &fn_links_dmdu0);
#endif
#endif
#ifdef SPECTRUM
/* Fix TUP Coulomb gauge - gauge links only*/
rephase( OFF );
gaugefix(TUP,(Real)1.8,500,(Real)GAUGE_FIX_TOL);
rephase( ON );
#ifdef FN
invalidate_all_ferm_links(&fn_links);
#ifdef DM_DU0
invalidate_all_ferm_links(&fn_links_dmdu0);
#endif
#endif
/* Load fat and long links for fermion measurements */
load_ferm_links(&fn_links, &ks_act_paths);
#ifdef DM_DU0
load_ferm_links(&fn_links_dmdu0, &ks_act_paths_dmdu0);
#endif
if(strstr(spectrum_request,",spectrum,") != NULL){
#ifdef ONEMASS
avspect_iters += spectrum2(mass,F_OFFSET(phi),F_OFFSET(xxx),
&fn_links);
#else
avspect_iters += spectrum2( mass1, F_OFFSET(phi1),
F_OFFSET(xxx1), &fn_links);
avspect_iters += spectrum2( mass2, F_OFFSET(phi1),
F_OFFSET(xxx1), &fn_links);
#endif
}
if(strstr(spectrum_request,",spectrum_point,") != NULL){
#ifdef ONEMASS
avspect_iters += spectrum_fzw(mass,F_OFFSET(phi),F_OFFSET(xxx),
&fn_links);
#else
avspect_iters += spectrum_fzw( mass1, F_OFFSET(phi1),
F_OFFSET(xxx1), &fn_links);
avspect_iters += spectrum_fzw( mass2, F_OFFSET(phi1),
F_OFFSET(xxx1), &fn_links);
#endif
}
if(strstr(spectrum_request,",nl_spectrum,") != NULL){
#ifdef ONEMASS
avspect_iters += nl_spectrum(mass,F_OFFSET(phi),F_OFFSET(xxx),
F_OFFSET(tempmat1),F_OFFSET(staple),
&fn_links);
#else
avspect_iters += nl_spectrum( mass1, F_OFFSET(phi1),
F_OFFSET(xxx1), F_OFFSET(tempmat1),F_OFFSET(staple),
&fn_links);
#endif
}
if(strstr(spectrum_request,",spectrum_mom,") != NULL){
#ifdef ONEMASS
avspect_iters += spectrum_mom(mass,mass,F_OFFSET(phi),5e-3,
&fn_links);
#else
avspect_iters += spectrum_mom( mass1, mass1,
F_OFFSET(phi1), 1e-1,
&fn_links);
#endif
}
if(strstr(spectrum_request,",spectrum_multimom,") != NULL){
#ifdef ONEMASS
avspect_iters += spectrum_multimom(mass,
spectrum_multimom_low_mass,
spectrum_multimom_mass_step,
spectrum_multimom_nmasses,
5e-3, &fn_links);
#else
avspect_iters += spectrum_multimom(mass1,
spectrum_multimom_low_mass,
spectrum_multimom_mass_step,
spectrum_multimom_nmasses,
5e-3, &fn_links);
#endif
}
#ifndef ONEMASS
if(strstr(spectrum_request,",spectrum_nd,") != NULL){
avspect_iters += spectrum_nd( mass1, mass2, 1e-1,
&fn_links);
}
#endif
if(strstr(spectrum_request,",spectrum_nlpi2,") != NULL){
#ifdef ONEMASS
avspect_iters += spectrum_nlpi2(mass,mass,F_OFFSET(phi),5e-3,
&fn_links );
#else
avspect_iters += spectrum_nlpi2( mass1, mass1,
F_OFFSET(phi1),1e-1,
&fn_links );
avspect_iters += spectrum_nlpi2( mass2, mass2,
F_OFFSET(phi1),1e-1,
&fn_links );
#endif
}
if(strstr(spectrum_request,",spectrum_singlets,") != NULL){
#ifdef ONEMASS
avspect_iters += spectrum_singlets(mass, 5e-3, F_OFFSET(phi),
&fn_links);
#else
avspect_iters += spectrum_singlets(mass1, 5e-3, F_OFFSET(phi1),
&fn_links );
avspect_iters += spectrum_singlets(mass2, 5e-3, F_OFFSET(phi1),
&fn_links );
#endif
}
if(strstr(spectrum_request,",fpi,") != NULL)
{
avspect_iters += fpi_2( fpi_mass, fpi_nmasses, 2e-3,
&fn_links );
}
#ifdef HYBRIDS
if(strstr(spectrum_request,",spectrum_hybrids,") != NULL){
#ifdef ONEMASS
avspect_iters += spectrum_hybrids( mass,F_OFFSET(phi),1e-1,
&fn_links);
#else
avspect_iters += spectrum_hybrids( mass1, F_OFFSET(phi1), 5e-3,
&fn_links);
avspect_iters += spectrum_hybrids( mass2, F_OFFSET(phi1), 2e-3,
&fn_links);
#endif
}
#endif
if(strstr(spectrum_request,",hvy_pot,") != NULL){
rephase( OFF );
hvy_pot( F_OFFSET(link[XUP]) );
rephase( ON );
}
#endif /* SPECTRUM */
avs_iters += s_iters;
++meascount;
fflush(stdout);
}
} /* end loop over trajectories */
node0_printf("RUNNING COMPLETED\n"); fflush(stdout);
if(meascount>0) {
node0_printf("average cg iters for step= %e\n",
(double)avs_iters/meascount);
#ifdef SPECTRUM
node0_printf("average cg iters for spectrum = %e\n",
(double)avspect_iters/meascount);
#endif
}
dtime += dclock();
if(this_node==0){
printf("Time = %e seconds\n",dtime);
printf("total_iters = %d\n",total_iters);
}
fflush(stdout);
/* save lattice if requested */
if( saveflag != FORGET ){
rephase( OFF );
save_lattice( saveflag, savefile, stringLFN );
rephase( ON );
#ifdef HAVE_QIO
// save_random_state_scidac_from_site("randsave", "Dummy file XML",
// "Random number state", QIO_SINGLEFILE, F_OFFSET(site_prn));
// save_color_vector_scidac_from_site("xxx1save", "Dummy file XML",
// "xxx vector", QIO_SINGLEFILE, F_OFFSET(xxx1),1);
// save_color_vector_scidac_from_site("xxx2save", "Dummy file XML",
// "xxx vector", QIO_SINGLEFILE, F_OFFSET(xxx2),1);
#endif
}
}
#ifdef HAVE_QDP
QDP_finalize();
#endif
normal_exit(0);
return 0;
}
int main( int argc, char **argv ){
register site *s;
int i,si;
int prompt;
double dtime;
su3_vector **eigVec ;
su3_vector *tmp ;
double *eigVal ;
int total_R_iters ;
double chirality, chir_ev, chir_od ;
imp_ferm_links_t **fn;
initialize_machine(&argc,&argv);
/* Remap standard I/O */
if(remap_stdio_from_args(argc, argv) == 1)terminate(1);
g_sync();
/* set up */
prompt = setup();
/* loop over input sets */
while( readin(prompt) == 0){
dtime = -dclock();
#ifdef HISQ_SVD_COUNTER
hisq_svd_counter = 0;
#endif
restore_fermion_links_from_site(fn_links, PRECISION);
/* call fermion_variable measuring routines */
/* results are printed in output file */
f_meas_imp( 1, PRECISION, F_OFFSET(phi), F_OFFSET(xxx), mass,
0, fn_links);
eigVal = (double *)malloc(Nvecs*sizeof(double));
eigVec = (su3_vector **)malloc(Nvecs*sizeof(su3_vector*));
for(i=0;i<Nvecs;i++)
eigVec[i]=
(su3_vector*)malloc(sites_on_node*sizeof(su3_vector));
fn = get_fm_links(fn_links);
active_parity = EVEN;
total_R_iters=Kalkreuter(eigVec, eigVal, eigenval_tol,
error_decr, Nvecs, MaxIter, Restart,
Kiters);
node0_printf("The above where eigenvalues of -Dslash^2 in MILC normalization\n");
node0_printf("Here we also list eigenvalues of iDslash in continuum normalization\n");
for(i=0;i<Nvecs;i++)
{
if ( eigVal[i] > 0.0 ){ chirality = sqrt(eigVal[i]) / 2.0; }
else { chirality = 0.0; }
node0_printf("eigenval(%i): %10g\n",i,chirality) ;
}
tmp = (su3_vector*)malloc(sites_on_node*sizeof(su3_vector));
for(i=0;i<Nvecs;i++)
{
// if ( eigVal[i] > 10.0*eigenval_tol )
// {
/* Construct to odd part of the vector. *
* Note that the true odd part of the eigenvector is *
* i/sqrt(eigVal) Dslash Psi. But since I only compute *
* the chirality the i factor is irrelevant (-i)*i=1!! */
dslash_field(eigVec[i], tmp, ODD, fn[0]) ;
FORSOMEPARITY(si,s,ODD){
scalar_mult_su3_vector( &(tmp[si]),
1.0/sqrt(eigVal[i]),
&(eigVec[i][si]) ) ;
}
// measure_chirality(eigVec[i], &chirality, EVENANDODD);
/* Here I divide by 2 since the EVEN vector is normalized to
* 1. The EVENANDODD vector is normalized to 2. I could have
* normalized the EVENANDODD vector to 1 and then not devide
* by to. The measure_chirality routine assumes vectors
* normalized to 1. */
// node0_printf("Chirality(%i): %g\n",i,chirality/2) ;
measure_chirality(eigVec[i], &chir_ev, EVEN);
measure_chirality(eigVec[i], &chir_od, ODD);
chirality = (chir_ev + chir_od) / 2.0;
node0_printf("Chirality(%i) -- even, odd, total: %10g, %10g, %10g\n",
i,chir_ev,chir_od,chirality) ;
// }
// else
// {
/* This is considered a "zero mode", and treated as such */
// measure_chirality(eigVec[i], &chirality, EVEN);
// node0_printf("Chirality(%i): %g\n",i,chirality) ;
// }
}
#ifdef EO
cleanup_dslash_temps();
#endif
free(tmp);
/**
for(i=0;i<Nvecs;i++)
{
sprintf(label,"DENSITY(%i)",i) ;
print_densities(eigVec[i], label, ny/2,nz/2,nt/2, EVEN) ;
}
**/
for(i=0;i<Nvecs;i++)
free(eigVec[i]) ;
free(eigVec) ;
free(eigVal) ;
invalidate_fermion_links(fn_links);
fflush(stdout);
node0_printf("RUNNING COMPLETED\n"); fflush(stdout);
dtime += dclock();
if(this_node==0){
printf("Time = %e seconds\n",dtime);
printf("total_iters = %d\n",total_iters);
printf("total Rayleigh iters = %d\n",total_R_iters);
#ifdef HISQ_SVD_COUNTER
printf("hisq_svd_counter = %d\n",hisq_svd_counter);
#endif
}
fflush(stdout);
}
int
main( int argc, char **argv )
{
int meascount,traj_done,i;
int prompt;
int s_iters, avs_iters, avspect_iters, avbcorr_iters;
double dtime, dclock();
initialize_machine(&argc,&argv);
#ifdef HAVE_QDP
QDP_initialize(&argc, &argv);
#ifndef QDP_PROFILE
QDP_profcontrol(0);
#endif
#endif
/* Remap standard I/O */
if(remap_stdio_from_args(argc, argv) == 1)terminate(1);
g_sync();
/* set up */
prompt = setup();
/* loop over input sets */
while( readin(prompt) == 0) {
/* perform warmup trajectories */
#ifdef MILC_GLOBAL_DEBUG
global_current_time_step = 0;
#endif /* MILC_GLOBAL_DEBUG */
dtime = -dclock();
for( traj_done=0; traj_done < warms; traj_done++ ){
update();
}
node0_printf("WARMUPS COMPLETED\n"); fflush(stdout);
/* perform measuring trajectories, reunitarizing and measuring */
meascount=0; /* number of measurements */
avspect_iters = avs_iters = avbcorr_iters = 0;
for( traj_done=0; traj_done < trajecs; traj_done++ ){
#ifdef MILC_GLOBAL_DEBUG
#ifdef HISQ_REUNITARIZATION_DEBUG
{
int isite, idir;
site *s;
FORALLSITES(isite,s) {
for( idir=XUP;idir<=TUP;idir++ ) {
lattice[isite].on_step_Y[idir] = 0;
lattice[isite].on_step_W[idir] = 0;
lattice[isite].on_step_V[idir] = 0;
}
}
}
#endif /* HISQ_REUNITARIZATION_DEBUG */
#endif /* MILC_GLOBAL_DEBUG */
/* do the trajectories */
s_iters=update();
/* measure every "propinterval" trajectories */
if( (traj_done%propinterval)==(propinterval-1) ){
/* call gauge_variable fermion_variable measuring routines */
/* results are printed in output file */
rephase(OFF);
g_measure( );
rephase(ON);
#ifdef MILC_GLOBAL_DEBUG
#ifdef HISQ
g_measure_plaq( );
#endif
#ifdef MEASURE_AND_TUNE_HISQ
g_measure_tune( );
#endif /* MEASURE_AND_TUNE_HISQ */
#endif /* MILC_GLOBAL_DEBUG */
/************************************************************/
/* WARNING: The spectrum code below is under revision */
/* It works only in special cases */
/* For the asqtad spectrum, please create the lattice first */
/* and then run the appropriate executable in ks_imp_dyn. */
/************************************************************/
/* Do some fermion measurements */
#ifdef SPECTRUM
/* Fix TUP Coulomb gauge - gauge links only*/
rephase( OFF );
gaugefix(TUP,(Real)1.8,500,(Real)GAUGE_FIX_TOL);
rephase( ON );
invalidate_all_ferm_links(&fn_links);
#ifdef DM_DU0
invalidate_all_ferm_links(&fn_links_dmdu0);
#endif
#endif
for(i=0;i<n_dyn_masses;i++){
// Remake the path table if the fermion coeffs change for this mass
// DT IT CAN"T BE RIGHT TO CALL IT WITH dyn_mass
//if(make_path_table(&ks_act_paths, &ks_act_paths_dmdu0,dyn_mass[i]))
//AB: NOT SURE IF WE ARE DOING THIS RIGHT HERE
// HAVE TO THINK THROUGH HOW LINKS ARE LOADED FOR MEASUREMENTS
// AND WHERE NAIK CORRECTION CAN EVER POSSIBLY ENTER
// if(make_path_table(&ks_act_paths, &ks_act_paths_dmdu0, 0.0/*TEMP*/ ))
{
// If they change, invalidate only fat and long links
//node0_printf("INVALIDATE\n");
invalidate_all_ferm_links(&fn_links);
#ifdef DM_DU0
invalidate_all_ferm_links(&fn_links_dmdu0);
#endif
}
/* Load fat and long links for fermion measurements if needed */
#ifdef HISQ
//AB: QUICK FIX TO USE NAIK EPSILON FOR SPECTRUM MEASUREMENTS,
// WORKS ONLY IF IN THE RATIONAL FUNCTION FILE naik_term_epsilon IS NON-ZERO
// FOR LAST PSEUDO-FIELD
// IT IS ASSUMED THAT THIS CORRECTION CORRESPONDS TO LAST DYNAMICAL MASS
//AB: OLD WAY OF INITIALIZING THE LINKS: fn_links.hl.current_X_set = 0;
// INSTEAD WE DO:
//// if(n_dyn_masses-1==i) { // last dynamical mass, assumed to be c-quark
//// fn_links.hl.current_X_set = n_naiks-1;
//DT CHARM QUARK NEEDS SMALLER RESIDUAL
//// node0_printf("TEMP: reset rsqprop from %e to %e\n",rsqprop,1e-8*rsqprop);
//// rsqprop *= 1e-8;
//// }
//// else { // light quarks
fn_links.hl.current_X_set = 0;
//// }
#endif
load_ferm_links(&fn_links, &ks_act_paths);
#ifdef DM_DU0
#ifdef HISQ
fn_links_dmdu0.hl.current_X_set = 0;
#endif
load_ferm_links(&fn_links_dmdu0, &ks_act_paths_dmdu0);
#endif
f_meas_imp( F_OFFSET(phi1), F_OFFSET(xxx1), dyn_mass[i],
&fn_links, &fn_links_dmdu0);
/* Measure derivatives wrto chemical potential */
#ifdef D_CHEM_POT
Deriv_O6( F_OFFSET(phi1), F_OFFSET(xxx1), F_OFFSET(xxx2),
dyn_mass[i], &fn_links, &fn_links_dmdu0);
#endif
#ifdef SPECTRUM
// DT: At the moment spectrum_nd does only the first two masses
// this only makes sense to get the kaon, and only works if
// eps_naik is the same for both the first two quarks
if( strstr(spectrum_request,",spectrum_nd,") != NULL && i==0 )
avspect_iters += spectrum_nd( dyn_mass[0], dyn_mass[1], 1e-2, &fn_links);
// AB: spectrum() is used only for the charm quark,
// i.e., last dynamical mass
if(strstr(spectrum_request,",spectrum,") != NULL && n_dyn_masses-1==i)
avspect_iters += spectrum2( dyn_mass[i], F_OFFSET(phi1),
F_OFFSET(xxx1), &fn_links);
if(strstr(spectrum_request,",spectrum_point,") != NULL)
avspect_iters += spectrum_fzw( dyn_mass[i], F_OFFSET(phi1),
F_OFFSET(xxx1), &fn_links);
// AB: nl_spectrum is used only for strange,
// i.e., second mass
if(strstr(spectrum_request,",nl_spectrum,") != NULL && 1==i)
avspect_iters += nl_spectrum( dyn_mass[i], F_OFFSET(phi1),
F_OFFSET(xxx1),
F_OFFSET(tempmat1),
F_OFFSET(staple),
&fn_links);
// AB: spectrum_mom is used only for charm,
// i.e., last mass
if(strstr(spectrum_request,",spectrum_mom,") != NULL && n_dyn_masses-1==i)
avspect_iters += spectrum_mom( dyn_mass[i], dyn_mass[i],
F_OFFSET(phi1), 1e-1,
&fn_links);
// For now we can't do the off-diagonal spectrum if Dirac operators
// depend on masses. We need two propagators
// if(strstr(spectrum_request,",spectrum_multimom,") != NULL)
// avspect_iters += spectrum_multimom(dyn_mass[i],
// spectrum_multimom_low_mass,
// spectrum_multimom_mass_step,
// spectrum_multimom_nmasses,
// 5e-3, &fn_links);
// For now we can't do the off-diagonal spectrum if Dirac operators
// depend on masses. We need two propagators
// if(strstr(spectrum_request,",spectrum_nd,") != NULL){
// avspect_iters += spectrum_nd( mass1, mass2, 1e-1,
// &fn_links);
// AB: spectrum_nlpi2 is used only for up/down,
// i.e., first mass
if(strstr(spectrum_request,",spectrum_nlpi2,") != NULL && 0==i)
avspect_iters += spectrum_nlpi2( dyn_mass[i], dyn_mass[i],
F_OFFSET(phi1),1e-1,
&fn_links );
if(strstr(spectrum_request,",spectrum_singlets,") != NULL)
avspect_iters += spectrum_singlets(dyn_mass[i], 5e-3,
F_OFFSET(phi1), &fn_links );
// For now we can't do the off-diagonal spectrum if Dirac operators
// depend on masses. We need two propagators
// if(strstr(spectrum_request,",fpi,") != NULL)
// avspect_iters += fpi_2( fpi_mass, fpi_nmasses, 2e-3,
// &fn_links );
#ifdef HYBRIDS
if(strstr(spectrum_request,",spectrum_hybrids,") != NULL)
avspect_iters += spectrum_hybrids( dyn_mass[i], F_OFFSET(phi1),
5e-3, &fn_links);
#endif
if(strstr(spectrum_request,",hvy_pot,") != NULL){
rephase( OFF );
hvy_pot( F_OFFSET(link[XUP]) );
rephase( ON );
}
#endif
// if(n_dyn_masses-1==i) { // last dynamical mass, assumed to be c-quark
//DT CHARM QUARK NEEDS SMALLER RESIDUAL
//AB NEED TO RETURN RESIDUAL TO THE ORIGINAL VALUE
// node0_printf("TEMP: reset rsqprop from %e to %e\n",rsqprop,1e+8*rsqprop);
// rsqprop *= 1e+8;
// }
}
avs_iters += s_iters;
++meascount;
fflush(stdout);
}
} /* end loop over trajectories */
node0_printf("RUNNING COMPLETED\n"); fflush(stdout);
if(meascount>0) {
node0_printf("average cg iters for step= %e\n",
(double)avs_iters/meascount);
}
dtime += dclock();
if(this_node==0){
printf("Time = %e seconds\n",dtime);
printf("total_iters = %d\n",total_iters);
}
fflush(stdout);
/* save lattice if requested */
if( saveflag != FORGET ){
rephase( OFF );
save_lattice( saveflag, savefile, stringLFN );
rephase( ON );
}
}
#ifdef HAVE_QDP
QDP_finalize();
#endif
normal_exit(0);
return 0;
}
