int fecmxc_initialize_multi(bd_t *bd, int dev_id, int phy_id, uint32_t addr)
{
uint32_t base_mii;
struct mii_dev *bus = NULL;
#ifdef CONFIG_PHYLIB
struct phy_device *phydev = NULL;
#endif
int ret;
#ifdef CONFIG_MX6
if (mx6_enet_fused(addr)) {
printf("Ethernet@0x%x is fused, disable it\n", addr);
return -2;
}
#endif
#ifdef CONFIG_MX28
/*
* The i.MX28 has two ethernet interfaces, but they are not equal.
* Only the first one can access the MDIO bus.
*/
base_mii = MXS_ENET0_BASE;
#else
#ifdef CONFIG_FEC_MXC_MDIO_BASE
base_mii = CONFIG_FEC_MXC_MDIO_BASE;
#else
base_mii = addr;
#endif
#endif
debug("eth_init: fec_probe(bd, %i, %i) @ %08x\n", dev_id, phy_id, addr);
bus = fec_get_miibus(base_mii, dev_id);
if (!bus)
return -ENOMEM;
#ifdef CONFIG_PHYLIB
phydev = phy_find_by_mask(bus, 1 << phy_id, PHY_INTERFACE_MODE_RGMII);
if (!phydev) {
free(bus);
return -ENOMEM;
}
ret = fec_probe(bd, dev_id, addr, bus, phydev);
#else
ret = fec_probe(bd, dev_id, addr, bus, phy_id);
#endif
if (ret) {
#ifdef CONFIG_PHYLIB
free(phydev);
#endif
free(bus);
}
return ret;
}
int board_eth_init(bd_t *bis)
{
uint32_t base = IMX_FEC_BASE;
struct mii_dev *bus = NULL;
struct phy_device *phydev = NULL;
int ret;
setup_iomux_enet();
#ifdef CONFIG_FEC_MXC
bus = fec_get_miibus(base, -1);
if (!bus)
return 0;
/* scan phy 4,5,6,7 */
phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII);
if (!phydev) {
free(bus);
return 0;
}
printf("using phy at %d\n", phydev->addr);
ret = fec_probe(bis, -1, base, bus, phydev);
if (ret) {
printf("FEC MXC: %s:failed\n", __func__);
free(phydev);
free(bus);
}
#endif
return 0;
}
int board_eth_init(bd_t *bis)
{
uint32_t base = IMX_FEC_BASE;
struct mii_dev *bus = NULL;
struct phy_device *phydev = NULL;
int ret;
setup_iomux_enet();
bus = fec_get_miibus(base, -1);
if (!bus)
return 0;
/* scan phy 0 and 5 */
phydev = phy_find_by_mask(bus, 0x21, PHY_INTERFACE_MODE_RGMII);
if (!phydev) {
free(bus);
return 0;
}
/* depending on the phy address we can detect our board version */
if (phydev->addr == 0)
setenv("boardver", "");
else
setenv("boardver", "mr");
printf("using phy at %d\n", phydev->addr);
ret = fec_probe(bis, -1, base, bus, phydev);
if (ret) {
printf("FEC MXC: %s:failed\n", __func__);
free(phydev);
free(bus);
}
return 0;
}
int board_eth_init(bd_t *bis)
{
uint32_t base = IMX_FEC_BASE;
struct mii_dev *bus = NULL;
struct phy_device *phydev = NULL;
int ret;
bus = fec_get_miibus(base, -1);
if (!bus)
return 0;
/* scan phy */
phydev = phy_find_by_mask(bus, (0xf << CONFIG_FEC_MXC_PHYADDR),
PHY_INTERFACE_MODE_RGMII);
if (!phydev) {
free(bus);
puts("No phy found\n");
return 0;
}
ret = fec_probe(bis, -1, base, bus, phydev);
if (ret) {
puts("FEC MXC: probe failed\n");
free(phydev);
free(bus);
}
return 0;
}
int fecmxc_initialize_multi(bd_t *bd, int dev_id, int phy_id, uint32_t addr)
{
int lout = 1;
debug("eth_init: fec_probe(bd, %i, %i) @ %08x\n", dev_id, phy_id, addr);
lout = fec_probe(bd, dev_id, phy_id, addr);
return lout;
}
int fecmxc_initialize(bd_t *bd)
{
int lout = 1;
debug("eth_init: fec_probe(bd)\n");
lout = fec_probe(bd, -1, CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE);
return lout;
}
int board_eth_init(bd_t *bis)
{
struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
struct mii_dev *bus;
struct phy_device *phydev;
int ret = enable_fec_anatop_clock(0, ENET_25MHZ);
if (ret)
return ret;
/* set gpr1[ENET_CLK_SEL] */
setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_ENET_CLK_SEL_MASK);
setup_iomux_enet();
bus = fec_get_miibus(IMX_FEC_BASE, -1);
if (!bus)
return -EINVAL;
phydev = phy_find_by_mask(bus, ETH_PHY_MASK, PHY_INTERFACE_MODE_RGMII);
if (!phydev) {
ret = -EINVAL;
goto free_bus;
}
debug("using phy at address %d\n", phydev->addr);
ret = fec_probe(bis, -1, IMX_FEC_BASE, bus, phydev);
if (ret)
goto free_phydev;
return 0;
free_phydev:
free(phydev);
free_bus:
free(bus);
return ret;
}
int board_eth_init(bd_t *bis)
{
uint32_t base = IMX_FEC_BASE;
struct mii_dev *bus = NULL;
struct phy_device *phydev = NULL;
int ret;
setup_iomux_enet();
#ifdef CONFIG_FEC_MXC
bus = fec_get_miibus(base, -1);
if (!bus)
return -EINVAL;
/* scan phy 4,5,6,7 */
phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII);
if (!phydev) {
ret = -EINVAL;
goto free_bus;
}
printf("using phy at %d\n", phydev->addr);
ret = fec_probe(bis, -1, base, bus, phydev);
if (ret)
goto free_phydev;
#endif
#ifdef CONFIG_CI_UDC
/* For otg ethernet*/
usb_eth_initialize(bis);
#endif
return 0;
free_phydev:
free(phydev);
free_bus:
free(bus);
return ret;
}
