/**
* driver_init - initialize driver model.
*
* Call the driver model init functions to initialize their
* subsystems. Called early from init/main.c.
*/
void __init driver_init(void)
{
printk(KERN_INFO "%s, devtmpfs_init\n", __FILE__);
printk(KERN_INFO "%s, devices_init\n", __FILE__);
printk(KERN_INFO "%s, buses_init\n", __FILE__);
printk(KERN_INFO "%s, classes_init\n", __FILE__);
printk(KERN_INFO "%s, firmware_init\n", __FILE__);
printk(KERN_INFO "%s, hypervisor_init\n", __FILE__);
printk(KERN_INFO "%s, platform_bus_init\n", __FILE__);
printk(KERN_INFO "%s, cpu_dev_init\n", __FILE__);
printk(KERN_INFO "%s, memory_dev_init\n", __FILE__);
/* These are the core pieces */
devtmpfs_init();
devices_init();
buses_init();
classes_init();
firmware_init();
hypervisor_init();
/* These are also core pieces, but must come after the
* core core pieces.
*/
platform_bus_init();
cpu_dev_init();
memory_dev_init();
}
int main() {
firmware_init(); //initialize firmware
controller_run(); //run control logic
return -1; //should never get here
}
/**
* sec_pa_service - kernel interface to access PA services
*
* This function is used by kernel code to call Protected Application
* services. Currently is used by Aegis Validator.
*/
int sec_pa_service(const char *pa_name, int pa_sub, int flags,
const void *params, void *results, struct sec_result *output)
{
int rv = ENODEV;
mutex_lock(&sdev.lock);
if (!sdev.ops)
goto out;
rv = firmware_init(NULL);
if (rv < 0)
goto out;
rv = secenv_init(NULL, flags, output);
if (rv || output->rom_rv)
/* initialization failed */
goto out;
rv = call_pa_service(pa_name, pa_sub, params, results, output);
out:
mutex_unlock(&sdev.lock);
return rv;
}
void __init driver_init(void)
{
/* These are the core pieces */
devices_init();
buses_init();
classes_init();
firmware_init();
/* These are also core pieces, but must come after the
* core core pieces.
*/
platform_bus_init();
system_bus_init();
cpu_dev_init();
}
/**
* driver_init - initialize driver model.
*
* Call the driver model init functions to initialize their
* subsystems. Called early from init/main.c.
*/
void __init driver_init(void)
{
/* These are the core pieces */
devtmpfs_init();
devices_init();
buses_init();
classes_init();
firmware_init();
hypervisor_init();
/* These are also core pieces, but must come after the
* core core pieces.
*/
platform_bus_init();
cpu_dev_init();
memory_dev_init();
container_dev_init();
of_core_init();
}
static int process_cmd_pa(struct sec_status *ss)
{
struct sec_result *output;
size_t cpar, cres;
int rv;
pr_debug("started: %d\n", ss->cmd);
output = sec_obuf_set(ss, 0);
if (!output)
return -ENOMEM;
pr_debug("param.length: %d\n", ss->param.length);
rv = firmware_init(ss->pabin);
if (rv < 0)
return rv;
rv = pa_command_query(ss->cmd, ss->data, ss->param.length, &cpar, &cres,
&sdev.fw[sdev.fwid].format);
if (rv) {
pr_debug("PA query failed!\n");
return rv;
}
pr_debug("cpar: %d, cres: %d\n", cpar, cres);
rv = check_cmd_arg_length(ss->param.length, cpar);
if (rv)
return rv;
output = sec_obuf_set(ss, cres);
if (!output)
return -ENOMEM;
rv = call_cmd_pa(ss, cres, output);
if (!rv && output->rom_rv == SEC_OK && output->pa_rv == SEC_OK)
sec_obuf_add(ss->obuf, cres);
return rv;
}
void __init driver_init(void)
{
/* These are the core pieces */
devices_init();
buses_init();
classes_init();
#ifndef DDE_LINUX
firmware_init();
hypervisor_init();
#endif
/* These are also core pieces, but must come after the
* core core pieces.
*/
platform_bus_init();
#ifndef DDE_LINUX
system_bus_init();
cpu_dev_init();
memory_dev_init();
attribute_container_init();
#endif
}
static void Init()
{
CLNT_STRUCT clnt;
HRESULT *res = NULL;
pli_setThreadName("MAIN");
pli_init();
md_open();
se_open();
DG_Init();
board_init();
firmware_init();
sendDebugMemoryAndAllocateDumpMemory(0, 0);
VIDEO_INIT_DATA initData;
initData.boardType = getTVE();
clnt = prepareCLNT(BLOCK_MODE | USE_INTR_BUF | SEND_VIDEO_CPU, VIDEO_SYSTEM, VERSION);
VIDEO_RPC_ToAgent_VideoCreate_0(&initData, &clnt);
BYTE *audioDebugFlag;
unsigned long audioPhyAddr;
BYTE *videoDebugFlag;
unsigned long videoPhyAddr;
pli_allocContinuousMemoryMesg("AudioDebugFlag", 4, (BYTE**)&audioDebugFlag, &audioPhyAddr);
pli_allocContinuousMemoryMesg("VideoDebugFlag", 4, (BYTE**)&videoDebugFlag, &videoPhyAddr);
#define AUDIO_DEBUG_FLAG 0x00000001
#define VIDEO_DEBUG_FLAG 0x00000001
pli_IPCWriteULONG((BYTE*)audioDebugFlag, AUDIO_DEBUG_FLAG);
pli_IPCWriteULONG((BYTE*)videoDebugFlag, VIDEO_DEBUG_FLAG);
clnt = prepareCLNT(NONBLOCK_MODE | USE_POLL_BUF | SEND_AUDIO_CPU, D_PROGRAM, D_VERSION);
set_debug_flag_0((int*)&audioPhyAddr, &clnt);
clnt = prepareCLNT(NONBLOCK_MODE | USE_POLL_BUF | SEND_VIDEO_CPU, D_PROGRAM, D_VERSION);
set_debug_flag_0((int*)&videoPhyAddr, &clnt);
audio_firmware_configure();
video_firmware_configure();
g_vo = new VoutUtil();
LoadTvConfig();
LoadAudioConfig();
board_codec_mute(false);
board_dac_mute(false);
InitHDMI(new MyHDMICallbacks());
g_hScreen = getSurfaceHandle(rect.width, rect.height, Format_32);
DG_DrawRectangle(g_hScreen,
0,
0,
rect.width,
rect.height,
RESERVED_COLOR_KEY,
NULL);
g_hDisplay = DG_GetDisplayHandle();
DG_DisplayArea (g_hDisplay,
0,
0,
rect.width,
rect.height,
g_hScreen,
0,
0,
Alpha_SrcMajor,
0,
ColorKey_Src,
RESERVED_COLOR_KEY);
g_pb = new VideoPlayback(MEDIATYPE_None);
g_pb->LoadMedia("file:///file_not_found.wmv");
//pli_listAllMemory();
setSpdifSampleRate(setup->GetSpdifRate());
printf("[LIBKETLAER]init done.\n");
}