Ejemplo n.º 1
0
Archivo: flash.c Proyecto: jmt42/rusefi
int flashSectorErase(flashsector_t sector) {
	/* Unlock flash for write access */
	if (flashUnlock() == CH_FAILED)
		return FLASH_RETURN_NO_PERMISSION;

	/* Wait for any busy flags. */
	flashWaitWhileBusy();

	/* Setup parallelism before any program/erase */
	FLASH->CR &= ~FLASH_CR_PSIZE_MASK;
	FLASH->CR |= FLASH_CR_PSIZE_VALUE;

	/* Start deletion of sector.
	 * SNB(3:1) is defined as:
	 * 0000 sector 0
	 * 0001 sector 1
	 * ...
	 * 1011 sector 11
	 * others not allowed */
	FLASH->CR &= ~(FLASH_CR_SNB_0 | FLASH_CR_SNB_1 | FLASH_CR_SNB_2 | FLASH_CR_SNB_3);
	if (sector & 0x1)
		FLASH->CR |= FLASH_CR_SNB_0;
	if (sector & 0x2)
		FLASH->CR |= FLASH_CR_SNB_1;
	if (sector & 0x4)
		FLASH->CR |= FLASH_CR_SNB_2;
	if (sector & 0x8)
		FLASH->CR |= FLASH_CR_SNB_3;
	FLASH->CR |= FLASH_CR_SER;
	FLASH->CR |= FLASH_CR_STRT;

	/* Wait until it's finished. */
	flashWaitWhileBusy();

	/* Sector erase flag does not clear automatically. */
	FLASH->CR &= ~FLASH_CR_SER;

	/* Lock flash again */
	flashLock()
	;

	/* Check deleted sector for errors */
	if (flashIsErased(flashSectorBegin(sector), flashSectorSize(sector)) == FALSE)
		return FLASH_RETURN_BAD_FLASH; /* Sector is not empty despite the erase cycle! */

	/* Successfully deleted sector */
	return FLASH_RETURN_SUCCESS;
}
Ejemplo n.º 2
0
int flashIHexFile(FIL* file)
{
    IHexRecord irec;
    flashsector_t sector;
    bool erasedSectors[FLASH_SECTOR_COUNT] = { FALSE };
    flashaddr_t baseAddress = 0;
    flashaddr_t address = 0;

    while (Read_IHexRecord(&irec, file) == IHEX_OK)
    {
        switch (irec.type)
        {
        case IHEX_TYPE_00:    /**< Data Record */
            /* Compute the target address in flash */
            address = baseAddress + irec.address;

            /* Erase the corresponding addresses if needed */
            for (sector = flashSectorAt(address); sector <= flashSectorAt(address + irec.dataLen - 1); ++sector)
            {
                /* Check if the sector has been erased during this IHex flashing procedure to
                   prevent erasing already written data */
                if (erasedSectors[sector] == TRUE)
                    continue;

                /* Check if the sector in flash needs to be erased */
                if (flashIsErased(flashSectorBegin(sector), flashSectorSize(sector)) == FALSE)
                {
                    /* Erase the sector */
                    if (flashSectorErase(sector) != FLASH_RETURN_SUCCESS)
                        return BOOTLOADER_ERROR_BADFLASH;
                }

                /* Set the erased flag to prevent erasing the same sector twice during
                   the IHex flashing procedure */
                erasedSectors[sector] = TRUE;
            }

            /* Write the data in flash */
            if (flashWrite(address, (const char*)irec.data, irec.dataLen) != FLASH_RETURN_SUCCESS)
                return BOOTLOADER_ERROR_BADFLASH;
            break;

        case IHEX_TYPE_04:    /**< Extended Linear Address Record */
            /* Compute the base address of the following data records */
            baseAddress = irec.data[0];
            baseAddress <<= 8;
            baseAddress += irec.data[1];
            baseAddress <<= 16;
            break;

        case IHEX_TYPE_01:    /**< End of File Record */
            /* Check that the end of file record is at the end of the file... */
            return f_eof(file) ? BOOTLOADER_SUCCESS : BOOTLOADER_ERROR_BADHEX;

        case IHEX_TYPE_05:    /**< Start Linear Address Record */
            /* Ignored */
            break;

        case IHEX_TYPE_02:    /**< Extended Segment Address Record */
        case IHEX_TYPE_03:    /**< Start Segment Address Record */
            /* Not supported */
            return BOOTLOADER_ERROR_BADHEX;
        }
    }

    return BOOTLOADER_ERROR_BADHEX;
}