void flood_close( TiFloodNetwork * net )
{
// todo: you should cancel all pending network transmission first before call
// this function.
frame_close( net->txque );
frame_close( net->rxbuf );
frame_close( net->rxque );
}
int Header::qt_metacall(QMetaObject::Call _c, int _id, void **_a)
{
_id = QWidget::qt_metacall(_c, _id, _a);
if (_id < 0)
return _id;
if (_c == QMetaObject::InvokeMetaMethod) {
switch (_id) {
case 0: mouse_release((*reinterpret_cast< QMouseEvent*(*)>(_a[1]))); break;
case 1: mouse_move((*reinterpret_cast< QMouseEvent*(*)>(_a[1]))); break;
case 2: mouse_left_press((*reinterpret_cast< QMouseEvent*(*)>(_a[1]))); break;
case 3: mouse_left_press(); break;
case 4: mouse_right_press(); break;
case 5: mouse_mid_press(); break;
case 6: mouse_double_click(); break;
case 7: frame_close(); break;
case 8: quit_frame(); break;
default: ;
}
_id -= 9;
}
return _id;
}
void tinymac_recvnode(void)
{
TiCc2420Adapter * cc;
TiFrameRxTxInterface * rxtx;;
TiTinyMAC * mac;
TiTimerAdapter *timer;
TiFrame * rxbuf;
char * msg = "welcome to tinymac recv test...";
int len=0;
target_init();
// flash the led to indicate the software is successfully running now.
//
led_open();
led_on( LED_ALL );
hal_delay( 500 );
led_off( LED_ALL );
led_on( LED_RED );
// initialize the runtime library for debugging input/output and assertion
// hal_assert_report is defined in module "hal_assert"
//
//dbo_open( 38400 );
rtl_init( (void *)dbio_open(38400), (TiFunDebugIoPutChar)dbio_putchar, (TiFunDebugIoGetChar)dbio_getchar, hal_assert_report );
dbc_putchar( 0xF0 );
dbc_mem( msg, strlen(msg) );
cc = cc2420_construct( (void *)(&m_cc), sizeof(TiCc2420Adapter) );
mac = tinymac_construct((char *)(&m_tiny), sizeof(TiTinyMAC));
timer= timer_construct((char *)(&m_timer),sizeof(TiTimerAdapter));
#ifdef CONFIG_TSET_LISTENER
// cc = cc2420_open( cc, 0, _aloha_listener, NULL, 0x00 );
cc = cc2420_open( cc, 0, tinymac_evolve, mac, 0x00 );
rxtx = cc2420_interface( cc, &m_rxtx );
mac = tinymac_open( mac, rxtx, CONFIG_CHANNEL, CONFIG_PANID, CONFIG_LOCAL_ADDRESS,
timer, _tinymac_listener, NULL,0x00 );
#endif
#ifndef CONFIG_TSET_LISTENER
cc = cc2420_open( cc, 0, NULL, NULL, 0x00 );
rxtx = cc2420_interface( cc, &m_rxtx );
mac = tinymac_open( mac, rxtx, CONFIG_CHANNEL, CONFIG_PANID, CONFIG_LOCAL_ADDRESS, NULL, NULL,0x00 );
#endif
cc2420_setchannel( cc, CONFIG_CHANNEL );
cc2420_setrxmode( cc ); // enable RX mode
cc2420_setpanid( cc, CONFIG_PANID ); // network identifier, seems no use in sniffer mode
cc2420_setshortaddress( cc, CONFIG_LOCAL_ADDRESS ); // in network address, seems no use in sniffer mode
cc2420_enable_autoack( cc );
#ifdef CONFIG_TEST_ADDRESSRECOGNITION
cc2420_enable_addrdecode( cc );
#else
cc2420_disable_addrdecode( cc );
#endif
#ifdef CONFIG_TEST_ACK
cc2420_enable_autoack( cc );
#endif
rxbuf = frame_open( (char*)(&m_rxbufmem), FRAME_HOPESIZE(MAX_IEEE802FRAME154_SIZE), 3, 20, 0 );
#ifdef CONFIG_TEST_ACK
//fcf = OPF_DEF_FRAMECONTROL_DATA_ACK;
#else
//fcf = OPF_DEF_FRAMECONTROL_DATA_NOACK;
#endif
hal_enable_interrupts();
/* Wait for listener action. The listener function will be called by the TiCc2420Adapter
* object when a frame arrives */
#ifdef CONFIG_TEST_LISTENER
while (1) {}
#endif
/* Query the TiCc2420Adapter object if there's no listener */
#ifndef CONFIG_TEST_LISTENER
while(1)
{
frame_reset( rxbuf, 3, 20, 0 );
len = tinymac_recv( mac, rxbuf, 0x00 );
if (len > 0)
{
dbc_putchar( 0xF3 );
dbc_mem( frame_startptr(rxbuf), frame_length(rxbuf) );
//frame_moveouter( rxbuf );
//_output_frame( rxbuf, NULL );
//frame_moveinner( rxbuf );
led_off( LED_RED );
/* warning: You shouldn't wait too long in the while loop, or else
* you may encounter frame loss. However, the program should still
* work properly even the delay time is an arbitrary value. No error
* are allowed in this case.
*/
//hal_delay( 500 );
led_toggle( LED_RED );
//hal_delay( 500 );
}
tinymac_evolve(mac, NULL );
}
#endif
frame_close( rxbuf );
tinymac_close( mac );
cc2420_close( cc );
}
void recvnode(void)
{
TiCc2420Adapter * cc;
TiFrameRxTxInterface * rxtx;
TiNioAcceptor * nac;
TiAloha * mac;
TiTimerAdapter *timer;
TiTimerManager * vtm;
TiTimer * mac_timer;
TiFrame * rxbuf;
char * msg = "welcome to aloha recv test...";
int len=0;
target_init();
// flash the led to indicate the software is successfully running now.
//
led_open();
led_on( LED_ALL );
hal_delay( 500 );
led_off( LED_ALL );
//led_on( LED_RED );
// initialize the runtime library for debugging input/output and assertion
// hal_assert_report is defined in module "hal_assert"
//
//dbo_open( 38400 );
rtl_init( (void *)dbio_open(38400), (TiFunDebugIoPutChar)dbio_putchar, (TiFunDebugIoGetChar)dbio_getchar, hal_assert_report );
dbc_putchar( 0xF0 );
dbc_mem( msg, strlen(msg) );
cc = cc2420_construct( (void *)(&m_cc), sizeof(TiCc2420Adapter) );
nac = nac_construct( &m_nacmem[0], NAC_SIZE );
mac = aloha_construct( (char *)(&m_aloha), sizeof(TiAloha) );
timer= timer_construct(( char *)(&m_timer),sizeof(TiTimerAdapter));
vtm = vtm_construct( (void*)&m_vtm, sizeof(m_vtm) );
timer = timer_open( timer, 2, NULL, NULL, 0x00 );
vtm = vtm_open( vtm, timer, VTM_RESOLUTION );
mac_timer = vtm_apply( vtm );
vti_open( mac_timer, NULL, NULL );
#ifdef CONFIG_TSET_LISTENER
// cc = cc2420_open( cc, 0, _aloha_listener, NULL, 0x00 );
cc = cc2420_open( cc, 0, aloha_evolve, mac, 0x00 );
rxtx = cc2420_interface( cc, &m_rxtx );
mac = aloha_open( mac, rxtx, CONFIG_ALOHA_CHANNEL, CONFIG_ALOHA_PANID, CONFIG_ALOHA_LOCAL_ADDRESS,
mac_timer, _aloha_listener, NULL,0x00 );
#endif
#ifndef CONFIG_TSET_LISTENER
cc = cc2420_open( cc, 0, NULL, NULL, 0x00 );
rxtx = cc2420_interface( cc, &m_rxtx );
nac_open( nac, rxtx, CONFIG_NIOACCEPTOR_RXQUE_CAPACITY, CONFIG_NIOACCEPTOR_TXQUE_CAPACITY);
mac = aloha_open( mac, rxtx, nac,CONFIG_ALOHA_CHANNEL, CONFIG_ALOHA_PANID, CONFIG_ALOHA_LOCAL_ADDRESS,
mac_timer, NULL, NULL,0x00 );
#endif
cc2420_setchannel( cc, CONFIG_ALOHA_CHANNEL );
cc2420_setrxmode( cc ); // enable RX mode
cc2420_setpanid( cc, CONFIG_ALOHA_PANID ); // network identifier, seems no use in sniffer mode
cc2420_setshortaddress( cc, CONFIG_ALOHA_LOCAL_ADDRESS ); // in network address, seems no use in sniffer mode
cc2420_enable_autoack( cc );
cc2420_settxpower( cc, CC2420_POWER_1);//cc2420_settxpower( cc, CC2420_POWER_2);CC2420_POWER_1
#ifdef CONFIG_TEST_ADDRESSRECOGNITION
cc2420_enable_addrdecode( cc );
#else
cc2420_disable_addrdecode( cc );
#endif
#ifdef CONFIG_TEST_ACK
cc2420_enable_autoack( cc );
#endif
rxbuf = frame_open( (char*)(&m_rxbufmem), FRAME_HOPESIZE(MAX_IEEE802FRAME154_SIZE), 3, 20, 0 );
dbc_putchar(0x11);
#ifdef CONFIG_TEST_ACK
//fcf = OPF_DEF_FRAMECONTROL_DATA_ACK;
#else
//fcf = OPF_DEF_FRAMECONTROL_DATA_NOACK;
#endif
hal_enable_interrupts();
/* Wait for listener action. The listener function will be called by the TiCc2420Adapter
* object when a frame arrives */
#ifdef CONFIG_TEST_LISTENER
while (1) {}
#endif
/* Query the TiCc2420Adapter object if there's no listener */
#ifndef CONFIG_TEST_LISTENER
while(1)
{
char * ptr;//todo for testing
frame_reset( rxbuf, 3, 20, 0 );
len = aloha_recv( mac, rxbuf, 0x00 );
if (len > 0)
{
frame_moveouter( rxbuf );
_output_frame( rxbuf, NULL );
frame_moveinner( rxbuf );
/*
dbc_write( frame_startptr( rxbuf),frame_length( rxbuf));//todo for testing
ptr = frame_startptr( rxbuf);//todo for testing
dbc_putchar( 0xff);//todo for testing
dbc_uint8( ptr[ (frame_length( rxbuf)-2)]);//todo for testing
dbc_putchar( 0xff);//todo for testing
frame_moveinner( rxbuf );//todo for testing*/
//led_off( LED_RED );
/* warning: You shouldn't wait too long in the while loop, or else
* you may encounter frame loss. However, the program should still
* work properly even the delay time is an arbitrary value. No error
* are allowed in this case.
*/
//hal_delay( 500 );
led_toggle( LED_RED );
}
aloha_evolve(mac, NULL );
}
#endif
frame_close( rxbuf );
aloha_close( mac );
cc2420_close( cc );
}
