/*********************************************************************
* @fn gapRole_ProcessOSALMsg
*
* @brief Process an incoming task message.
*
* @param pMsg - message to process
*
* @return none
*/
static void gapRole_ProcessOSALMsg( osal_event_hdr_t *pMsg )
{
switch ( pMsg->event )
{
case HCI_GAP_EVENT_EVENT:
if ( pMsg->status == HCI_COMMAND_COMPLETE_EVENT_CODE )
{
hciEvt_CmdComplete_t *pPkt = (hciEvt_CmdComplete_t *)pMsg;
if ( pPkt->cmdOpcode == HCI_READ_RSSI )
{
int8 rssi = (int8)pPkt->pReturnParam[3];
if ( ((gapRole_state == GAPROLE_CONNECTED)
|| (gapRole_state == GAPROLE_CONNECTED_ADV))
&& (rssi != RSSI_NOT_AVAILABLE) )
{
// Report RSSI to app
if ( pGapRoles_AppCGs && pGapRoles_AppCGs->pfnRssiRead )
{
pGapRoles_AppCGs->pfnRssiRead( rssi );
}
}
}
}
break;
case GAP_MSG_EVENT:
gapRole_ProcessGAPMsg( (gapEventHdr_t *)pMsg );
break;
case L2CAP_SIGNAL_EVENT:
{
l2capSignalEvent_t *pPkt = (l2capSignalEvent_t *)pMsg;
// Process the Parameter Update Response
if ( pPkt->opcode == L2CAP_PARAM_UPDATE_RSP )
{
l2capParamUpdateRsp_t *pRsp = (l2capParamUpdateRsp_t *)&(pPkt->cmd.updateRsp);
if ( pRsp->result == SUCCESS )
{
// All is good stop Update Parameters timeout
VOID osal_stop_timerEx( gapRole_TaskID, UPDATE_PARAMS_TIMEOUT_EVT );
}
}
}
break;
default:
break;
}
}
/*********************************************************************
* @fn gapRole_ProcessOSALMsg
*
* @brief Process an incoming task message.
*
* @param pMsg - message to process
*
* @return none
*/
static void gapRole_ProcessOSALMsg( osal_event_hdr_t *pMsg )
{
switch ( pMsg->event )
{
case HCI_GAP_EVENT_EVENT:
if ( pMsg->status == HCI_COMMAND_COMPLETE_EVENT_CODE )
{
//hciEvt_CmdComplete_t *pPkt = (hciEvt_CmdComplete_t *)pMsg;
}
break;
case GAP_MSG_EVENT:
gapRole_ProcessGAPMsg( (gapEventHdr_t *)pMsg );
break;
default:
break;
}
}
/*********************************************************************
* @fn gapRole_ProcessOSALMsg
*
* @brief Process an incoming task message.
*
* @param pMsg - message to process
*
* @return none
*/
static void gapRole_ProcessOSALMsg( osal_event_hdr_t *pMsg )
{
switch ( pMsg->event )
{
case HCI_GAP_EVENT_EVENT:
if ( pMsg->status == HCI_COMMAND_COMPLETE_EVENT_CODE )
{
hciEvt_CmdComplete_t *pPkt = (hciEvt_CmdComplete_t *)pMsg;
if ( pPkt->cmdOpcode == HCI_READ_RSSI )
{
int8 rssi = (int8)pPkt->pReturnParam[3];
if ( (gapRole_state == GAPROLE_CONNECTED) && (rssi != RSSI_NOT_AVAILABLE) )
{
// Report RSSI to app
if ( pGapRoles_AppCGs && pGapRoles_AppCGs->pfnRssiRead )
{
pGapRoles_AppCGs->pfnRssiRead( rssi );
}
}
}
}
break;
case GAP_MSG_EVENT:
gapRole_ProcessGAPMsg( (gapEventHdr_t *)pMsg );
break;
case L2CAP_SIGNAL_EVENT:
{
l2capSignalEvent_t *pPkt = (l2capSignalEvent_t *)pMsg;
// Process the Parameter Update Response
if ( pPkt->opcode == L2CAP_PARAM_UPDATE_RSP )
{
l2capParamUpdateRsp_t *pRsp = (l2capParamUpdateRsp_t *)&(pPkt->cmd.updateRsp);
if ( ( pRsp->result == L2CAP_CONN_PARAMS_REJECTED ) &&
( paramUpdateNoSuccessOption == GAPROLE_TERMINATE_LINK ) )
{
// Cancel connection param update timeout timer
VOID osal_stop_timerEx( gapRole_TaskID, CONN_PARAM_TIMEOUT_EVT );
// Terminate connection immediately
GAPRole_TerminateConnection();
}
else
{
uint16 timeout = GAP_GetParamValue( TGAP_CONN_PARAM_TIMEOUT );
// Let's wait for Controller to update connection parameters if they're
// accepted. Otherwise, decide what to do based on no success option.
VOID osal_start_timerEx( gapRole_TaskID, CONN_PARAM_TIMEOUT_EVT, timeout );
}
}
}
break;
default:
break;
}
}