void startupInit()
{
usbdataEnable();
gdispSetBacklight(50);
gdispSetContrast(50);
geventListenerInit(&gl);
gwinAttachListener(&gl);
// Setup UI objects and show splash
guiCreate();
gwinProgressbarSetResolution(ghProgbarLoad, 10);
gwinProgressbarStart(ghProgbarLoad, 300);
graphInit();
// Setup INA219 I2C Current Sensor
ina219Init();
sduObjectInit(USB_SERIAL_DRIVER);
sduStart(USB_SERIAL_DRIVER, &serusbcfg);
/*
* Activates the USB driver and then the USB bus pull-up on D+.
* Note, a delay is inserted in order to not have to disconnect the cable
* after a reset.
*/
usbDisconnectBus(serusbcfg.usbp);
chThdSleepMilliseconds(1000);
usbStart(serusbcfg.usbp, &usbcfg);
usbConnectBus(serusbcfg.usbp);
setStartTime();
chThdCreateStatic(ledThread, sizeof(ledThread), LOWPRIO, ThreadLED, NULL);
chThdCreateStatic(inaThread, sizeof(inaThread), HIGHPRIO, ThreadINA, NULL);
chThdCreateStatic(gfxvalThread, sizeof(gfxvalThread), NORMALPRIO, ThreadGFXVal, NULL);
chThdCreateStatic(timeThread, sizeof(timeThread), NORMALPRIO, ThreadTIME, NULL);
chThdCreateStatic(gfxEventThread, sizeof(gfxEventThread), NORMALPRIO, ThreadGFXEvent, NULL);
chThdSleepMilliseconds(2000);
chThdCreateStatic(graphThread, sizeof(graphThread), NORMALPRIO+5, ThreadGRAPH, NULL);
// Destroy splay screen and show main page
gwinDestroy(ghContainerPageSplash);
guiShowPage(1);
}
/*
* Application entry point.
*/
int main(void) {
/*
* System initializations.
* - HAL initialization, this also initializes the configured device drivers
* and performs the board-specific initializations.
* - Kernel initialization, the main() function becomes a thread and the
* RTOS is active.
*/
halInit();
chSysInit();
ADC2status = 0;
//write_to_backup_sram(0, 0, 0);
startBlinker();
/* initialize and clear the display */
gfxInit();
ginputGetMouse(0);
//ginputSetMouseCalibrationRoutines(0, mysave, myload, FALSE);
//ginputGetMouse(0);
// new ugfx do not need this gwinAttachMouse(0);
geventListenerInit(&gl);
gwinAttachListener(&gl);
//geventAttachSource(&gl, mouse, GLISTEN_MOUSEDOWNMOVES|GLISTEN_MOUSEMETA);
//mouse = ginputGetMouse(0);
//get screen size
width = gdispGetWidth();
height = gdispGetHeight();
swidth = gdispGetWidth();
sheight = gdispGetHeight();
font = gdispOpenFont("UI2");
//startBlinker();
myADCinit();
ICUinit();
/*
* Activates the serial driver 1 using the driver default configuration.
* PA2(TX) and PA3(RX) are routed to USART2.
*/
sdStart(&SD2, NULL);
palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7));
palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7));
chThdCreateStatic(waThread2, sizeof(waThread2), NORMALPRIO, Thread2, NULL);
//mouse = ginputGetMouse(0);
font = gdispOpenFont("UI2");
gwinSetDefaultFont(font);
gwinSetDefaultBgColor(Black);
gwinSetDefaultColor(White);
bHeight = gdispGetFontMetric(font, fontHeight)+2;
#if BOOTSCREEN
bootScreen();
#endif
#ifdef LOGO
gdispClear(Black);
CreateLogo();
#endif
// create main screen
createWidgets();
chprintf( (BaseSequentialStream *)&SD2, "Main loop\r\n", NULL );
while (TRUE)
{
//get an event
pe = geventEventWait(&gl, TIME_INFINITE);
switch(pe->type) {
case GEVENT_TOUCH:
{
pem = (GEventMouse *)pe;
if ((pem->type & GMETA_MOUSE_CLICK)) {
//gwinSetColor(ghc, Yellow);
chprintf((BaseSequentialStream *)&SD2, "\r\n-touch-click");
}
}
case GEVENT_GWIN_BUTTON:
if (((GEventGWinButton*)pe)->button == ghConsole)
{
gwinSetText(ghStatus2, "Console", TRUE);
chprintf( (BaseSequentialStream *)&SD2, "\r\nConsole button", NULL );
};
break;
case GEVENT_GWIN_SLIDER:
if (((GEventGWinSlider*)pe)->slider == ghBrightness)
{
gdispSetBacklight(((GEventGWinSlider *)pe)->position);
chprintf((BaseSequentialStream *)&SD2,"Slider %s = %d\r\n", gwinGetText(((GEventGWinSlider *)pe)->slider),
((GEventGWinSlider *)pe)->position);
}
break;
default:
break ;
}
}
}
static void createWidgets(void)
{
gwinSetDefaultFont(gdispOpenFont("UI2"));
gwinSetDefaultStyle(&WhiteWidgetStyle, FALSE);
gdispClear(White);
bHeight = gdispGetFontMetric(font, fontHeight)+2;
// apply default settings
GWidgetInit wi;
wi.customDraw = 0;
wi.customParam = 0;
wi.customStyle = 0;
wi.g.show = TRUE;
// create ICU1label
wi.g.y = bHeight*2;
wi.g.x = 0;
wi.g.width = 160;
wi.g.height = bHeight;
wi.text = "ICU1:";
ICU1label = gwinLabelCreate(NULL, &wi);
// ICU1vaule
wi.g.y = bHeight*2;
wi.g.x = 40;
wi.g.width = 160;
wi.g.height = bHeight;
wi.text = "Status2";
ICU1value = gwinLabelCreate(NULL, &wi);
// create ICU2label
wi.g.y = bHeight*3;
wi.g.x = 0;
wi.g.width = 160;
wi.g.height = bHeight;
wi.text = "ICU2:";
ICU2label = gwinLabelCreate(NULL, &wi);
// ICU2vaule
wi.g.y = bHeight*3;
wi.g.x = 40;
wi.g.width = 160;
wi.g.height = bHeight;
wi.text = "000";
ICU2value = gwinLabelCreate(NULL, &wi);
// create two status label
//status 1
wi.g.y = sheight-bHeight;
wi.g.x = 0;
wi.g.width = 50;
wi.g.height = bHeight;
wi.text = "Status1";
ghStatus1 = gwinLabelCreate(NULL, &wi);
// status 2
wi.g.y = sheight-bHeight;
wi.g.x = 160;
wi.g.width = 50;
wi.g.height = bHeight;
wi.text = "Status2";
ghStatus2 = gwinLabelCreate(NULL, &wi);
// Brightness
wi.g.y = sheight-(bHeight*2);
wi.g.x = 0;
wi.g.width = swidth;
wi.g.height = bHeight;
wi.text = "Brightness";
ghBrightness = gwinSliderCreate(NULL, &wi);
gwinSliderSetRange(ghBrightness, 0, 100);
gwinSliderSetPosition(ghBrightness, 50);
gdispSetBacklight(50);
// create ADC label
// ADClabel1
wi.g.y = 0;
wi.g.x = 0;
wi.g.width = 50;
wi.g.height = bHeight;
wi.text = "ADC1:";
ADClabel = gwinLabelCreate(NULL, &wi);
// ADClabel1
wi.g.y = 0;
wi.g.x = 40;
wi.g.width = 50;
wi.g.height = bHeight;
wi.text = "ADC value";
ADCvalue = gwinLabelCreate(NULL, &wi);
// create ADC label
// ADClabel1
wi.g.y = bHeight;
wi.g.x = 0;
wi.g.width = 70;
wi.g.height = bHeight;
wi.text = "Core temp:";
ADClabel2 = gwinLabelCreate(NULL, &wi);
// ADClabel1
wi.g.y = bHeight;
wi.g.x = 75;
wi.g.width = 50;
wi.g.height = bHeight;
wi.text = "ADC value2";
ADCvalue2 = gwinLabelCreate(NULL, &wi);
//create console button
bWidth = gdispGetStringWidth("Console", font);
wi.g.y = 10; //sheight-(bHeight*4);
wi.g.x = swidth-70;
wi.g.width = 50;
wi.g.height = bHeight+4;
wi.text = "Console";
ghConsole = gwinButtonCreate(NULL, &wi);
//create console BMP button
/*
wi.g.x = swidth-85; wi.g.y = 40; wi.g.width = 84; wi.g.height = 23;
ghbConsole = gwinImageCreate(NULL, &wi.g);
gwinImageOpenMemory(ghbConsole, Console);
gwinImageCache(ghbConsole);
*/
}
