static VOID WINAPI XmsBopProcedure(LPWORD Stack)
{
switch (getAH())
{
/* Get XMS Version */
case 0x00:
{
setAX(0x0300); /* XMS version 3.00 */
setBX(0x0301); /* Driver version 3.01 */
setDX(0x0001); /* HMA present */
break;
}
/* Request HMA */
case 0x01:
{
/* Check whether HMA is already reserved */
if (IsHmaReserved)
{
/* It is, bail out */
setAX(0x0000);
setBL(XMS_STATUS_HMA_IN_USE);
break;
}
// NOTE: We implicitely suppose that we always have HMA.
// If not, we should fail there with the XMS_STATUS_HMA_DOES_NOT_EXIST
// error code.
/* Check whether the requested size is above the minimal allowed one */
if (getDX() < HmaMinSize)
{
/* It is not, bail out */
setAX(0x0000);
setBL(XMS_STATUS_HMA_MIN_SIZE);
break;
}
/* Reserve it */
IsHmaReserved = TRUE;
setAX(0x0001);
setBL(XMS_STATUS_SUCCESS);
break;
}
/* Release HMA */
case 0x02:
{
/* Check whether HMA was reserved */
if (!IsHmaReserved)
{
/* It was not, bail out */
setAX(0x0000);
setBL(XMS_STATUS_HMA_NOT_ALLOCATED);
break;
}
/* Release it */
IsHmaReserved = FALSE;
setAX(0x0001);
setBL(XMS_STATUS_SUCCESS);
break;
}
/* Global Enable A20 */
case 0x03:
{
/* Enable A20 if needed */
if (!IsA20Enabled)
{
XmsLocalEnableA20();
if (getAX() != 0x0001)
{
/* XmsLocalEnableA20 failed and already set AX and BL to their correct values */
break;
}
IsA20Enabled = TRUE;
}
setAX(0x0001); /* Line successfully enabled */
setBL(XMS_STATUS_SUCCESS);
break;
}
/* Global Disable A20 */
case 0x04:
{
UCHAR Result = XMS_STATUS_SUCCESS;
/* Disable A20 if needed */
if (IsA20Enabled)
{
XmsLocalDisableA20();
if (getAX() != 0x0001)
{
/* XmsLocalDisableA20 failed and already set AX and BL to their correct values */
break;
}
IsA20Enabled = FALSE;
Result = getBL();
}
setAX(0x0001); /* Line successfully disabled */
setBL(Result);
break;
}
/* Local Enable A20 */
case 0x05:
{
/* This call sets AX and BL to their correct values */
XmsLocalEnableA20();
break;
}
/* Local Disable A20 */
case 0x06:
{
/* This call sets AX and BL to their correct values */
XmsLocalDisableA20();
break;
}
/* Query A20 State */
case 0x07:
{
setAX(EmulatorGetA20());
setBL(XMS_STATUS_SUCCESS);
break;
}
/* Query Free Extended Memory */
case 0x08:
{
setAX(XmsGetLargestFreeBlock());
setDX(FreeBlocks);
if (FreeBlocks > 0)
setBL(XMS_STATUS_SUCCESS);
else
setBL(XMS_STATUS_OUT_OF_MEMORY);
break;
}
/* Allocate Extended Memory Block */
case 0x09:
{
WORD Handle;
UCHAR Result = XmsAlloc(getDX(), &Handle);
if (Result == XMS_STATUS_SUCCESS)
{
setAX(1);
setDX(Handle);
}
else
{
setAX(0);
setBL(Result);
}
break;
}
/* Free Extended Memory Block */
case 0x0A:
{
UCHAR Result = XmsFree(getDX());
setAX(Result == XMS_STATUS_SUCCESS);
setBL(Result);
break;
}
/* Move Extended Memory Block */
case 0x0B:
{
PVOID SourceAddress, DestAddress;
PXMS_COPY_DATA CopyData = (PXMS_COPY_DATA)SEG_OFF_TO_PTR(getDS(), getSI());
PXMS_HANDLE HandleEntry;
if (CopyData->SourceHandle)
{
HandleEntry = GetHandleRecord(CopyData->SourceHandle);
if (!ValidateHandle(HandleEntry))
{
setAX(0);
setBL(XMS_STATUS_BAD_SRC_HANDLE);
break;
}
if (CopyData->SourceOffset >= HandleEntry->Size * XMS_BLOCK_SIZE)
{
setAX(0);
setBL(XMS_STATUS_BAD_SRC_OFFSET);
}
SourceAddress = (PVOID)REAL_TO_PHYS(HandleEntry->Address + CopyData->SourceOffset);
}
else
{
/* The offset is actually a 16-bit segment:offset pointer */
SourceAddress = FAR_POINTER(CopyData->SourceOffset);
}
if (CopyData->DestHandle)
{
HandleEntry = GetHandleRecord(CopyData->DestHandle);
if (!ValidateHandle(HandleEntry))
{
setAX(0);
setBL(XMS_STATUS_BAD_DEST_HANDLE);
break;
}
if (CopyData->DestOffset >= HandleEntry->Size * XMS_BLOCK_SIZE)
{
setAX(0);
setBL(XMS_STATUS_BAD_DEST_OFFSET);
}
DestAddress = (PVOID)REAL_TO_PHYS(HandleEntry->Address + CopyData->DestOffset);
}
else
{
/* The offset is actually a 16-bit segment:offset pointer */
DestAddress = FAR_POINTER(CopyData->DestOffset);
}
/* Perform the move */
RtlMoveMemory(DestAddress, SourceAddress, CopyData->Count);
setAX(1);
setBL(XMS_STATUS_SUCCESS);
break;
}
/* Lock Extended Memory Block */
case 0x0C:
{
DWORD Address;
UCHAR Result = XmsLock(getDX(), &Address);
if (Result == XMS_STATUS_SUCCESS)
{
setAX(1);
/* Store the LINEAR address in DX:BX */
setDX(HIWORD(Address));
setBX(LOWORD(Address));
}
else
{
setAX(0);
setBL(Result);
}
break;
}
/* Unlock Extended Memory Block */
case 0x0D:
{
UCHAR Result = XmsUnlock(getDX());
setAX(Result == XMS_STATUS_SUCCESS);
setBL(Result);
break;
}
/* Get Handle Information */
case 0x0E:
{
PXMS_HANDLE HandleEntry = GetHandleRecord(getDX());
UINT i;
UCHAR Handles = 0;
if (!ValidateHandle(HandleEntry))
{
setAX(0);
setBL(XMS_STATUS_INVALID_HANDLE);
break;
}
for (i = 0; i < XMS_MAX_HANDLES; i++)
{
if (HandleTable[i].Handle == 0) Handles++;
}
setAX(1);
setBH(HandleEntry->LockCount);
setBL(Handles);
setDX(HandleEntry->Size);
break;
}
/* Reallocate Extended Memory Block */
case 0x0F:
{
UCHAR Result = XmsRealloc(getDX(), getBX());
setAX(Result == XMS_STATUS_SUCCESS);
setBL(Result);
break;
}
/* Request UMB */
case 0x10:
{
BOOLEAN Result;
USHORT Segment = 0x0000; /* No preferred segment */
USHORT Size = getDX(); /* Size is in paragraphs */
Result = UmaDescReserve(&Segment, &Size);
if (Result)
setBX(Segment);
else
setBL(Size > 0 ? XMS_STATUS_SMALLER_UMB : XMS_STATUS_OUT_OF_UMBS);
setDX(Size);
setAX(Result);
break;
}
/* Release UMB */
case 0x11:
{
BOOLEAN Result;
USHORT Segment = getDX();
Result = UmaDescRelease(Segment);
if (!Result)
setBL(XMS_STATUS_INVALID_UMB);
setAX(Result);
break;
}
/* Reallocate UMB */
case 0x12:
{
BOOLEAN Result;
USHORT Segment = getDX();
USHORT Size = getBX(); /* Size is in paragraphs */
Result = UmaDescReallocate(Segment, &Size);
if (!Result)
{
if (Size > 0)
{
setBL(XMS_STATUS_SMALLER_UMB);
setDX(Size);
}
else
{
setBL(XMS_STATUS_INVALID_UMB);
}
}
setAX(Result);
break;
}
default:
{
DPRINT1("XMS command AH = 0x%02X NOT IMPLEMENTED\n", getAH());
setBL(XMS_STATUS_NOT_IMPLEMENTED);
}
}
}
__declspec(dllexport) void __cdecl VDDDispatch(void)
{
char str[512];
DWORD count;
DWORD msgs;
int retval;
int node_num;
BYTE* p;
vdd_status_t* status;
static DWORD writes;
static DWORD bytes_written;
static DWORD reads;
static DWORD bytes_read;
static DWORD inbuf_poll;
static DWORD online_poll;
static DWORD status_poll;
static DWORD vdd_yields;
static DWORD vdd_calls;
VDD_IO_HANDLERS IOHandlers = { NULL };
static VDD_IO_PORTRANGE PortRange;
retval=0;
node_num=getBH();
lprintf(LOG_DEBUG,"VDD_OP: (handle=%d) %d (arg=%X)", getAX(),getBL(),getCX());
vdd_calls++;
switch(getBL()) {
case VDD_OPEN:
sscanf("$Revision: 1.40 $", "%*s %s", revision);
lprintf(LOG_INFO,"Synchronet Virtual Device Driver, rev %s %s %s"
,revision, __DATE__, __TIME__);
#if 0
sprintf(str,"sbbsexec%d.log",node_num);
fp=fopen(str,"wb");
#endif
sprintf(str,"\\\\.\\mailslot\\sbbsexec\\wr%d",node_num);
rdslot=CreateMailslot(str
,0 //LINEAR_RX_BUFLEN /* Max message size (0=any) */
,MAILSLOT_WAIT_FOREVER /* Read timeout */
,NULL);
if(rdslot==INVALID_HANDLE_VALUE) {
lprintf(LOG_ERR,"!VDD_OPEN: Error %d opening %s"
,GetLastError(),str);
retval=1;
break;
}
sprintf(str,"\\\\.\\mailslot\\sbbsexec\\rd%d",node_num);
wrslot=CreateFile(str
,GENERIC_WRITE
,FILE_SHARE_READ
,NULL
,OPEN_EXISTING
,FILE_ATTRIBUTE_NORMAL
,(HANDLE) NULL);
if(wrslot==INVALID_HANDLE_VALUE) {
lprintf(LOG_ERR,"!VDD_OPEN: Error %d opening %s"
,GetLastError(),str);
retval=2;
break;
}
if(RingBufInit(&rdbuf, RINGBUF_SIZE_IN)!=0) {
retval=3;
break;
}
sprintf(str,"sbbsexec_hungup%d",node_num);
hungup_event=OpenEvent(
EVENT_ALL_ACCESS, /* access flag */
FALSE, /* inherit flag */
str); /* pointer to event-object name */
if(hungup_event==NULL) {
lprintf(LOG_ERR,"!VDD_OPEN: Error %d opening %s"
,GetLastError(),str);
retval=4;
break;
}
sprintf(str,"sbbsexec_hangup%d",node_num);
hangup_event=OpenEvent(
EVENT_ALL_ACCESS, /* access flag */
FALSE, /* inherit flag */
str); /* pointer to event-object name */
if(hangup_event==NULL) {
lprintf(LOG_WARNING,"!VDD_OPEN: Error %d opening %s"
,GetLastError(),str);
}
status_poll=0;
inbuf_poll=0;
online_poll=0;
yields=0;
lprintf(LOG_INFO,"Yield interval: %f milliseconds", yield_interval);
if(virtualize_uart) {
lprintf(LOG_INFO,"Virtualizing UART (0x%x, IRQ %u)"
,uart_io_base, uart_irq);
IOHandlers.inb_handler = uart_rdport;
IOHandlers.outb_handler = uart_wrport;
PortRange.First=uart_io_base;
PortRange.Last=uart_io_base + UART_IO_RANGE;
VDDInstallIOHook((HANDLE)getAX(), 1, &PortRange, &IOHandlers);
interrupt_event=CreateEvent(NULL,FALSE,FALSE,NULL);
InitializeCriticalSection(&interrupt_mutex);
_beginthread(interrupt_thread, 0, NULL);
}
lprintf(LOG_DEBUG,"VDD_OPEN: Opened successfully (wrslot=%p)", wrslot);
_beginthread(input_thread, 0, NULL);
retval=0;
break;
case VDD_CLOSE:
lprintf(LOG_INFO,"VDD_CLOSE: rdbuf=%u "
"status_poll=%u inbuf_poll=%u online_poll=%u yields=%u vdd_yields=%u vdd_calls=%u"
,RingBufFull(&rdbuf),status_poll,inbuf_poll,online_poll
,yields,vdd_yields,vdd_calls);
lprintf(LOG_INFO," read=%u bytes (in %u calls)",bytes_read,reads);
lprintf(LOG_INFO," wrote=%u bytes (in %u calls)",bytes_written,writes);
if(virtualize_uart) {
lprintf(LOG_INFO,"Uninstalling Virtualizaed UART IO Hook");
VDDDeInstallIOHook((HANDLE)getAX(), 1, &PortRange);
}
CloseHandle(rdslot);
CloseHandle(wrslot);
if(hungup_event!=NULL)
CloseHandle(hungup_event);
if(hangup_event!=NULL)
CloseHandle(hangup_event);
#if 0 /* This isn't strictly necessary...
and possibly the cause of a NULL dereference in the input_thread */
RingBufDispose(&rdbuf);
#endif
status_poll=0;
retval=0;
break;
case VDD_READ:
count = getCX();
if(count != 1)
lprintf(LOG_DEBUG,"VDD_READ of %d",count);
p = (BYTE*) GetVDMPointer((ULONG)((getES() << 16)|getDI())
,count,FALSE);
retval=vdd_read(p, count);
reads++;
bytes_read+=retval;
reset_yield();
break;
case VDD_PEEK:
count = getCX();
if(count != 1)
lprintf(LOG_DEBUG,"VDD_PEEK of %d",count);
p = (BYTE*) GetVDMPointer((ULONG)((getES() << 16)|getDI())
,count,FALSE);
retval=RingBufPeek(&rdbuf,p,count);
reset_yield();
break;
case VDD_WRITE:
count = getCX();
if(count != 1)
lprintf(LOG_DEBUG,"VDD_WRITE of %d",count);
p = (BYTE*) GetVDMPointer((ULONG)((getES() << 16)|getDI())
,count,FALSE);
if(!WriteFile(wrslot,p,count,&retval,NULL)) {
lprintf(LOG_ERR,"!VDD_WRITE: WriteFile Error %d (size=%d)"
,GetLastError(),retval);
retval=0;
} else {
writes++;
bytes_written+=retval;
reset_yield();
}
break;
case VDD_STATUS:
status_poll++;
count = getCX();
if(count != sizeof(vdd_status_t)) {
lprintf(LOG_DEBUG,"!VDD_STATUS: wrong size (%d!=%d)",count,sizeof(vdd_status_t));
retval=sizeof(vdd_status_t);
break;
}
status = (vdd_status_t*) GetVDMPointer((ULONG)((getES() << 16)|getDI())
,count,FALSE);
status->inbuf_size=RINGBUF_SIZE_IN;
status->inbuf_full=RingBufFull(&rdbuf);
msgs=0;
/* OUTBUF FULL/SIZE */
if(!GetMailslotInfo(
wrslot, /* mailslot handle */
&status->outbuf_size, /* address of maximum message size */
&status->outbuf_full, /* address of size of next message */
&msgs, /* address of number of messages */
NULL /* address of read time-out */
)) {
lprintf(LOG_ERR,"!VDD_STATUS: GetMailSlotInfo(%p) failed, error %u (msgs=%u, inbuf_full=%u, inbuf_size=%u)"
,wrslot
,GetLastError(), msgs, status->inbuf_full, status->inbuf_size);
status->outbuf_full=0;
status->outbuf_size=DEFAULT_MAX_MSG_SIZE;
} else
lprintf(LOG_DEBUG,"VDD_STATUS: MailSlot maxmsgsize=%u, nextmsgsize=%u, msgs=%u"
,status->outbuf_size
,status->outbuf_full
,msgs);
if(status->outbuf_full==MAILSLOT_NO_MESSAGE)
status->outbuf_full=0;
status->outbuf_full*=msgs;
/* ONLINE */
if(WaitForSingleObject(hungup_event,0)==WAIT_OBJECT_0)
status->online=0;
else
status->online=1;
retval=0; /* success */
break;
case VDD_INBUF_PURGE:
RingBufReInit(&rdbuf);
retval=0;
break;
case VDD_OUTBUF_PURGE:
lprintf(LOG_WARNING,"!VDD_OUTBUF_PURGE: NOT IMPLEMENTED");
retval=0;
break;
case VDD_INBUF_FULL:
retval=RingBufFull(&rdbuf);
inbuf_poll++;
break;
case VDD_INBUF_SIZE:
retval=RINGBUF_SIZE_IN;
break;
case VDD_OUTBUF_FULL:
if(!GetMailslotInfo(
wrslot, /* mailslot handle */
NULL, /* address of maximum message size */
&retval, /* address of size of next message */
&msgs, /* address of number of messages */
NULL /* address of read time-out */
))
retval=0;
if(retval==MAILSLOT_NO_MESSAGE)
retval=0;
retval*=msgs;
break;
case VDD_OUTBUF_SIZE:
if(!GetMailslotInfo(
wrslot, /* mailslot handle */
&retval, /* address of maximum message size */
NULL, /* address of size of next message */
NULL, /* address of number of messages */
NULL /* address of read time-out */
))
retval=DEFAULT_MAX_MSG_SIZE;
break;
case VDD_ONLINE:
if(WaitForSingleObject(hungup_event,0)==WAIT_OBJECT_0)
retval=0;
else
retval=1;
online_poll++;
break;
case VDD_YIELD: /* forced yield */
vdd_yields++;
yield();
break;
case VDD_MAYBE_YIELD: /* yield if YieldInterval is enabled and expired */
maybe_yield();
break;
case VDD_LOAD_INI_FILE: /* Load and parse settings file */
{
FILE* fp;
char cwd[MAX_PATH+1];
/* Load exec/sbbsexec.ini first (setting default values) */
count = getCX();
p = (BYTE*)GetVDMPointer((ULONG)((getES() << 16)|getDI())
,count,FALSE);
iniFileName(ini_fname, sizeof(ini_fname), p, INI_FILENAME);
if((fp=fopen(ini_fname,"r"))!=NULL) {
ini=iniReadFile(fp);
fclose(fp);
parse_ini(ROOT_SECTION);
}
/* Load cwd/sbbsexec.ini second (over-riding default values) */
GetCurrentDirectory(sizeof(cwd),cwd);
iniFileName(ini_fname, sizeof(ini_fname), cwd, INI_FILENAME);
if((fp=fopen(ini_fname,"r"))!=NULL) {
ini=iniReadFile(fp);
fclose(fp);
parse_ini(ROOT_SECTION);
}
}
break;
case VDD_LOAD_INI_SECTION: /* Parse (program-specific) sub-section of settings file */
count = getCX();
p = (BYTE*)GetVDMPointer((ULONG)((getES() << 16)|getDI())
,count,FALSE);
parse_ini(p);
break;
case VDD_DEBUG_OUTPUT: /* Send string to debug output */
count = getCX();
p = (BYTE*)GetVDMPointer((ULONG)((getES() << 16)|getDI())
,count,FALSE);
lputs(LOG_INFO, p);
break;
case VDD_HANGUP:
hangup();
break;
default:
lprintf(LOG_ERR,"!UNKNOWN VDD_OP: %d",getBL());
break;
}
setAX((WORD)retval);
}
void rs232_io()
{
#ifdef BIT_ORDER2
union {
half_word all;
struct {
HALF_WORD_BIT_FIELD word_length:2;
HALF_WORD_BIT_FIELD stop_bit:1;
HALF_WORD_BIT_FIELD parity:2;
HALF_WORD_BIT_FIELD baud_rate:3;
} bit;
} parameters;
#endif
#ifdef BIT_ORDER1
union {
half_word all;
struct {
HALF_WORD_BIT_FIELD baud_rate:3;
HALF_WORD_BIT_FIELD parity:2;
HALF_WORD_BIT_FIELD stop_bit:1;
HALF_WORD_BIT_FIELD word_length:2;
} bit;
} parameters;
#endif
DIVISOR_LATCH divisor_latch;
int j;
half_word timeout;
sys_addr timeout_location;
/* clear com/lpt idle flag */
IDLE_comlpt ();
setIF(1);
/*
* Which adapter?
*/
switch (getDX ())
{
case 0:
port = RS232_COM1_PORT_START;
timeout_location = RS232_COM1_TIMEOUT;
break;
case 1:
port = RS232_COM2_PORT_START;
timeout_location = RS232_COM2_TIMEOUT;
break;
case 2:
port = RS232_COM3_PORT_START;
timeout_location = RS232_COM3_TIMEOUT;
break;
case 3:
port = RS232_COM4_PORT_START;
timeout_location = RS232_COM4_TIMEOUT;
break;
default:
break;
}
/*
* Determine function
*/
switch (getAH ())
{
case 0:
/*
* Initialise the communication port
*/
value = 0x80; /* set DLAB */
outb(port + (io_addr) RS232_LCR, value);
/*
* Set baud rate
*/
parameters.all = getAL();
divisor_latch.all = divisors[parameters.bit.baud_rate];
outb(port + (io_addr) RS232_IER, divisor_latch.byte.MSByte);
outb(port + (io_addr) RS232_TX_RX, divisor_latch.byte.LSByte);
/*
* Set word length, stop bits and parity
*/
parameters.bit.baud_rate = 0;
outb(port + (io_addr) RS232_LCR, parameters.all);
/*
* Disable interrupts
*/
value = 0;
outb(port + (io_addr) RS232_IER, value);
return_status();
break;
case 1:
/*
* Send char over the comms line
*/
/*
* Set DTR and RTS
*/
outb(port + (io_addr) RS232_MCR, 3);
/*
* Real BIOS checks CTS and DSR - we know DSR ok.
* Real BIOS check THRE - we know it's ok.
* We only check CTS - this is supported on a few ports, eg. Macintosh.
*/
/*
* Wait for CTS to go high, or timeout
*/
sas_load(timeout_location, &timeout);
for ( j = 0; j < timeout; j++)
{
inb(port + (io_addr) RS232_MSR, &value);
if(value & 0x10)break; /* CTS High, all is well */
}
if(j < timeout)
{
outb(port + (io_addr) RS232_TX_RX, getAL()); /* Send byte */
inb(port + (io_addr) RS232_LSR, &value);
setAH(value); /* Return Line Status Reg in AH */
}
else
{
setAH(value | 0x80); /* Indicate time out */
}
break;
case 2:
/*
* Receive char over the comms line
*/
/*
* Set DTR
*/
value = 1;
outb(port + (io_addr) RS232_MCR, value);
/*
* Real BIOS checks DSR - we know it's ok.
*/
/*
* Wait for data to appear, or timeout(just an empirical guess)
*/
sas_load(timeout_location, &timeout);
for ( j = 0; j < timeout; j++)
{
inb(port + (io_addr) RS232_LSR, &value);
if ( (value & 1) == 1 )
{
/*
* Data ready go read it
*/
value &= 0x1e; /* keep error bits only */
setAH(value);
inb(port + (io_addr) RS232_TX_RX, &value);
setAL(value);
return;
}
}
/*
* Set timeout
*/
value |= 0x80;
setAH(value);
break;
case 3:
/*
* Return the communication port status
*/
return_status();
break;
case 4:
/*
* EXTENDED (PS/2) Initialise the communication port
*/
value = 0x80; /* set DLAB */
outb(port + (io_addr) RS232_LCR, value);
parameters.bit.word_length = getCH();
parameters.bit.stop_bit = getBL();
parameters.bit.parity = getBH();
parameters.bit.baud_rate = getCL();
/*
Set baud rate
*/
divisor_latch.all = divisors[parameters.bit.baud_rate];
outb(port + (io_addr) RS232_IER, divisor_latch.byte.MSByte);
outb(port + (io_addr) RS232_TX_RX, divisor_latch.byte.LSByte);
/*
* Set word length, stop bits and parity
*/
parameters.bit.baud_rate = 0;
outb(port + (io_addr) RS232_LCR, parameters.all);
/*
* Disable interrupts
*/
value = 0;
outb(port + (io_addr) RS232_IER, value);
return_status();
break;
case 5: /* EXTENDED Comms Port Control */
switch( getAL() )
{
case 0: /* Read modem control register */
inb( port + (io_addr) RS232_MCR, &value);
setBL(value);
break;
case 1: /* Write modem control register */
outb( port + (io_addr) RS232_MCR, getBL());
break;
}
/*
Return the communication port status
*/
return_status();
break;
default:
/*
** Yes both XT and AT BIOS's really do this.
*/
setAH( getAH()-3 );
break;
}
}
