Ejemplo n.º 1
0
static float
getTemperature (LPNXCTRLAPP pApp) {
  static int nUpdate = -1;
  static float fTemp = 0.0;

  if (nUpdate < 0 || nUpdate > TEMP_UPDATE_COUNT) {
    float fTmp = (getTMP36Value(pApp) + TMP36_DELTA - 0.5) * 100;
    float fCPUTemp = getCPUTemp()/1000.0;
    
    fCPUTemp = (fCPUTemp > 120) ? (fCPUTemp - 74) : fCPUTemp;
    if (fCPUTemp < CPUTEMP_SSG)
      fTmp -= (fCPUTemp > CPUTEMP_BASE) ? (fCPUTemp - CPUTEMP_BASE) : 0;
    else {
      float fD = (fCPUTemp > CPUTEMP_BASE) ?
        (fCPUTemp - CPUTEMP_BASE + SSG_DELTA) : 0;
      if (fD > TMP_MAX_DELTA) fD = TMP_MAX_DELTA;
      fTmp -= fD;
    }

    CPUTEMP = fCPUTemp;
    if (fTmp < -30 || fTmp > 50) fTmp = 0;

    fTemp = fTmp;
    nUpdate = 0;
  } else
    nUpdate++;

  return fTemp;
}
Ejemplo n.º 2
0
int main(int argc, char **argv) {
	InitDHT(1);
	char* json;

	int lckStatus;
	int res;
	int sleepTimeout;
	struct config configstr;

	char *passwd;
	char *username;
	char msproxyUrl[MAXBUF];

	//setup the syslog logging
	setlogmask(LOG_UPTO(LOGLEVEL));
	openlog("iot", LOG_PID | LOG_CONS, LOG_USER);
	syslog(LOG_INFO, "**** IoT Raspberry Pi Sample has started ****");

	// register the signal handler for USR1-user defined signal 1
	if (signal(SIGUSR1, sig_handler) == SIG_ERR)
		syslog(LOG_CRIT, "Not able to register the signal handler\n");
	if (signal(SIGINT, sig_handler) == SIG_ERR)
		syslog(LOG_CRIT, "Not able to register the signal handler\n");

	//read the config file, to decide whether to goto quickstart or registered mode of operation
	isRegistered = get_config(configFile, &configstr);

	if (isRegistered) {
		syslog(LOG_INFO, "Running in Registered mode\n");
		sprintf(msproxyUrl, "ssl://%s.messaging.internetofthings.ibmcloud.com:8883", configstr.org);
		if(strcmp(configstr.authmethod ,"token") != 0) {
			syslog(LOG_ERR, "Detected that auth-method is not token. Currently other authentication mechanisms are not supported, IoT process will exit.");
			syslog(LOG_INFO, "**** IoT Raspberry Pi Sample has ended ****");
				closelog();
				exit(1);
		} else {
			username = "******";
			passwd = configstr.authtoken;
		}
	} else {
		syslog(LOG_INFO, "Running in Quickstart mode\n");
		strcpy(msproxyUrl,"tcp://quickstart.messaging.internetofthings.ibmcloud.com:1883");
	}

	// read the events
	char* mac_address = getmac("eth0");
	getClientId(&configstr, mac_address);
	//the timeout between the connection retry
	int connDelayTimeout = 1;	// default sleep for 1 sec
	int retryAttempt = 0;

	// initialize the MQTT connection
	init_mqtt_connection(&client, msproxyUrl, isRegistered, clientId, username, passwd);
	// Wait till we get a successful connection to IoT MQTT server
	while (!MQTTAsync_isConnected(client)) {
		connDelayTimeout = 1; // add extra delay(3,60,600) only when reconnecting
		if (connected == -1) {
			connDelayTimeout = reconnect_delay(++retryAttempt);	//Try to reconnect after the retry delay
			syslog(LOG_ERR,
					"Failed connection attempt #%d. Will try to reconnect "
							"in %d seconds\n", retryAttempt, connDelayTimeout);
			connected = 0;
			init_mqtt_connection(&client, msproxyUrl, isRegistered, clientId, username,
					passwd);
		}
		fflush(stdout);
		sleep(connDelayTimeout);
	}
	// resetting the counters
	connDelayTimeout = 1;
	retryAttempt = 0;

	// count for the sine wave
	int count = 1;
	sleepTimeout = EVENTS_INTERVAL;

	//subscribe for commands - only on registered mode
	if (isRegistered) {
		subscribe(&client, subscribeTopic);
	}
	while (1) {
		JsonMessage json_message = { DEVICE_NAME, getCPUTemp(), sineVal(
				MIN_VALUE, MAX_VALUE, 16, count), GetCPULoad() , getHumidity(), getTemp()};
		json = generateJSON(json_message);
		res = publishMQTTMessage(&client, publishTopic, json);
		syslog(LOG_DEBUG, "Posted the message with result code = %d\n", res);
		if (res == -3) {
			//update the connected to connection failed
			connected = -1;
			while (!MQTTAsync_isConnected(client)) {
				if (connected == -1) {
					connDelayTimeout = reconnect_delay(++retryAttempt); //Try to reconnect after the retry delay
					syslog(LOG_ERR, "Failed connection attempt #%d. "
							"Will try to reconnect in %d "
							"seconds\n", retryAttempt, connDelayTimeout);
					sleep(connDelayTimeout);
					connected = 0;
					reconnect(&client, isRegistered, username,passwd);
				}
				fflush(stdout);
				sleep(1);
			}
			// resetting the counters
			connDelayTimeout = 1;
			retryAttempt = 0;
		}
		fflush(stdout);
		free(json);
		count++;
		sleep(sleepTimeout);
	}

	return 0;
}