void ProcessAsyncData(BowlerPacket * Packet){
//println_I("**Got Async Packet**");
//printPacket(Packet,INFO_PRINT);
Print_Level l = getPrintLevel();
setPrintLevelInfoPrint();
if (Packet->use.head.RPC==GCHV){
BYTE pin = Packet->use.data[0];
BYTE mode = GetChannelMode(pin);
if(mode == IS_ANALOG_IN ){
UINT16_UNION ana;
ana.byte.SB = Packet->use.data[1];
ana.byte.LB = Packet->use.data[2];
//ADC_val[pin-8]=ana.Val;
if(ana.Val>=0 && ana.Val<1024)
SetValFromAsync(pin,ana.Val);//asyncData[pin].currentVal=ana.Val;
println_I("***Setting analog value: ");p_int_I(pin);print_I(", ");p_int_I(ana.Val);
}
else if((mode == IS_DI) || (mode == IS_COUNTER_INPUT_HOME)|| (mode == IS_COUNTER_OUTPUT_HOME) || mode == IS_SERVO){
//DIG_val[pin]=Packet->use.data[1];
SetValFromAsync(pin,Packet->use.data[1]);//asyncData[pin].currentVal=Packet->use.data[1];
println_I("***Setting digital value: ");p_int_I(pin);print_I(", ");p_int_I(Packet->use.data[1]);//printStream(DIG_val,NUM_PINS);
}else {
if(IsAsync(pin)){
println_I("Sending async packet, not digital or analog");
PutBowlerPacket(Packet);
}
}
}else if (Packet->use.head.RPC==AASN){
int i;
for(i=0;i<8;i++){
BYTE pin = i+8;
BYTE mode = GetChannelMode(pin);
if(mode == IS_ANALOG_IN ){
UINT16_UNION ana;
ana.byte.SB = Packet->use.data[i*2];
ana.byte.LB = Packet->use.data[(i*2)+1];
//ADC_val[pin-8]=ana.Val
if(ana.Val>=0 && ana.Val<1024);
SetValFromAsync(pin,ana.Val);//asyncData[pin].currentVal=ana.Val;
}
}
}else if (Packet->use.head.RPC==DASN){
int i;
for(i=0;i<GetNumberOfIOChannels();i++){
BYTE mode = GetChannelMode(i);
if((mode == IS_DI) || (mode == IS_COUNTER_INPUT_HOME)|| (mode == IS_COUNTER_OUTPUT_HOME)|| (mode == IS_SERVO)){
SetValFromAsync(i,Packet->use.data[i]);//asyncData[i].currentVal=Packet->use.data[i];
}
}
//println_I("***Setting All Digital value: ");
}if (Packet->use.head.RPC==GetRPCValue("gacv")){
int i;
int val;
for(i=0;i<GetNumberOfIOChannels();i++){
val = get32bit(Packet, i*4);
if(getBcsIoDataTable()[i].PIN.asyncDataCurrentVal!=val){
println_I("Data on Pin ");p_int_I(i);print_I(" to val ");p_int_I(val);
SetValFromAsync(i,val);//
}
}
}else{
println_W("***Async packet not UNKNOWN***");
printPacket(Packet,WARN_PRINT);
}
// println_I("***Setting All value: [");
// int i;
// for(i=0;i<NUM_PINS;i++){
// p_int_I(asyncData[i].currentVal);print_I(" ");
// }
// print_I("]");
setPrintLevel(l);
}
void checkLinkHomingStatus(int group) {
if (!(GetPIDCalibrateionState(group) == CALIBRARTION_home_down ||
GetPIDCalibrateionState(group) == CALIBRARTION_home_up ||
GetPIDCalibrateionState(group) == CALIBRARTION_home_velocity
)
) {
return; //Calibration is not running
}
float current = GetPIDPosition(group);
float currentTime = getMs();
if (RunEvery(&getPidGroupDataTable(group)->timer) > 0) {
//println_W("Check Homing ");
if (GetPIDCalibrateionState(group) != CALIBRARTION_home_velocity) {
float boundVal = getPidGroupDataTable(group)->homing.homingStallBound;
if (bound(getPidGroupDataTable(group)->homing.previousValue,
current,
boundVal,
boundVal
)
) {
pidReset(group, getPidGroupDataTable(group)->homing.homedValue);
//after reset the current value will have changed
current = GetPIDPosition(group);
getPidGroupDataTable(group)->config.tipsScale = 1;
println_W("Homing Velocity for group ");
p_int_W(group);
print_W(", Resetting position to: ");
p_fl_W(getPidGroupDataTable(group)->homing.homedValue);
print_W(" current ");
p_fl_W(current);
float speed = -20.0;
if (GetPIDCalibrateionState(group) == CALIBRARTION_home_up)
speed *= 1.0;
else if (GetPIDCalibrateionState(group) == CALIBRARTION_home_down)
speed *= -1.0;
else {
println_E("Invalid homing type");
return;
}
Print_Level l = getPrintLevel();
//setPrintLevelInfoPrint();
setOutput(group, speed);
setPrintLevel(l);
getPidGroupDataTable(group)->timer.MsTime = getMs();
getPidGroupDataTable(group)->timer.setPoint = 2000;
SetPIDCalibrateionState(group, CALIBRARTION_home_velocity);
getPidGroupDataTable(group)->homing.lastTime = currentTime;
}
} else {
current = GetPIDPosition(group);
float posDiff = current - getPidGroupDataTable(group)->homing.previousValue; //ticks
float timeDiff = (currentTime - getPidGroupDataTable(group)->homing.lastTime) / 1000.0; //
float tps = (posDiff / timeDiff);
getPidGroupDataTable(group)->config.tipsScale = 20 / tps;
println_E("New scale factor: ");
p_fl_E(getPidGroupDataTable(group)->config.tipsScale);
print_E(" speed ");
p_fl_E(tps);
print_E(" on ");
p_int_E(group);
print_E(" Position difference ");
p_fl_E(posDiff);
print_E(" time difference ");
p_fl_E(timeDiff);
OnPidConfigure(group);
SetPIDCalibrateionState(group, CALIBRARTION_DONE);
}
getPidGroupDataTable(group)->homing.previousValue = current;
}
}