Ejemplo n.º 1
0
/*
 * Parse all pin widgets and store the useful pin nids to cfg
 *
 * The number of line-outs or any primary output is stored in line_outs,
 * and the corresponding output pins are assigned to line_out_pins[],
 * in the order of front, rear, CLFE, side, ...
 *
 * If more extra outputs (speaker and headphone) are found, the pins are
 * assisnged to hp_pins[] and speaker_pins[], respectively.  If no line-out jack
 * is detected, one of speaker of HP pins is assigned as the primary
 * output, i.e. to line_out_pins[0].  So, line_outs is always positive
 * if any analog output exists.
 *
 * The analog input pins are assigned to inputs array.
 * The digital input/output pins are assigned to dig_in_pin and dig_out_pin,
 * respectively.
 */
int snd_hda_parse_pin_defcfg(struct hda_codec *codec,
			     struct auto_pin_cfg *cfg,
			     const hda_nid_t *ignore_nids,
			     unsigned int cond_flags)
{
	hda_nid_t nid, end_nid;
	short seq, assoc_line_out;
	short sequences_line_out[ARRAY_SIZE(cfg->line_out_pins)];
	short sequences_speaker[ARRAY_SIZE(cfg->speaker_pins)];
	short sequences_hp[ARRAY_SIZE(cfg->hp_pins)];
	int i;

	memset(cfg, 0, sizeof(*cfg));

	memset(sequences_line_out, 0, sizeof(sequences_line_out));
	memset(sequences_speaker, 0, sizeof(sequences_speaker));
	memset(sequences_hp, 0, sizeof(sequences_hp));
	assoc_line_out = 0;

	end_nid = codec->start_nid + codec->num_nodes;
	for (nid = codec->start_nid; nid < end_nid; nid++) {
		unsigned int wid_caps = get_wcaps(codec, nid);
		unsigned int wid_type = get_wcaps_type(wid_caps);
		unsigned int def_conf;
		short assoc, loc, conn, dev;

		/* read all default configuration for pin complex */
		if (wid_type != AC_WID_PIN)
			continue;
		/* ignore the given nids (e.g. pc-beep returns error) */
		if (ignore_nids && is_in_nid_list(nid, ignore_nids))
			continue;

		def_conf = snd_hda_codec_get_pincfg(codec, nid);
		conn = get_defcfg_connect(def_conf);
		if (conn == AC_JACK_PORT_NONE)
			continue;
		loc = get_defcfg_location(def_conf);
		dev = get_defcfg_device(def_conf);

		/* workaround for buggy BIOS setups */
		if (dev == AC_JACK_LINE_OUT) {
			if (conn == AC_JACK_PORT_FIXED)
				dev = AC_JACK_SPEAKER;
		}

		switch (dev) {
		case AC_JACK_LINE_OUT:
			seq = get_defcfg_sequence(def_conf);
			assoc = get_defcfg_association(def_conf);

			if (!(wid_caps & AC_WCAP_STEREO))
				if (!cfg->mono_out_pin)
					cfg->mono_out_pin = nid;
			if (!assoc)
				continue;
			if (!assoc_line_out)
				assoc_line_out = assoc;
			else if (assoc_line_out != assoc)
				continue;
			if (cfg->line_outs >= ARRAY_SIZE(cfg->line_out_pins))
				continue;
			cfg->line_out_pins[cfg->line_outs] = nid;
			sequences_line_out[cfg->line_outs] = seq;
			cfg->line_outs++;
			break;
		case AC_JACK_SPEAKER:
			seq = get_defcfg_sequence(def_conf);
			assoc = get_defcfg_association(def_conf);
			if (cfg->speaker_outs >= ARRAY_SIZE(cfg->speaker_pins))
				continue;
			cfg->speaker_pins[cfg->speaker_outs] = nid;
			sequences_speaker[cfg->speaker_outs] = (assoc << 4) | seq;
			cfg->speaker_outs++;
			break;
		case AC_JACK_HP_OUT:
			seq = get_defcfg_sequence(def_conf);
			assoc = get_defcfg_association(def_conf);
			if (cfg->hp_outs >= ARRAY_SIZE(cfg->hp_pins))
				continue;
			cfg->hp_pins[cfg->hp_outs] = nid;
			sequences_hp[cfg->hp_outs] = (assoc << 4) | seq;
			cfg->hp_outs++;
			break;
		case AC_JACK_MIC_IN:
			add_auto_cfg_input_pin(cfg, nid, AUTO_PIN_MIC);
			break;
		case AC_JACK_LINE_IN:
			add_auto_cfg_input_pin(cfg, nid, AUTO_PIN_LINE_IN);
			break;
		case AC_JACK_CD:
			add_auto_cfg_input_pin(cfg, nid, AUTO_PIN_CD);
			break;
		case AC_JACK_AUX:
			add_auto_cfg_input_pin(cfg, nid, AUTO_PIN_AUX);
			break;
		case AC_JACK_SPDIF_OUT:
		case AC_JACK_DIG_OTHER_OUT:
			if (cfg->dig_outs >= ARRAY_SIZE(cfg->dig_out_pins))
				continue;
			cfg->dig_out_pins[cfg->dig_outs] = nid;
			cfg->dig_out_type[cfg->dig_outs] =
				(loc == AC_JACK_LOC_HDMI) ?
				HDA_PCM_TYPE_HDMI : HDA_PCM_TYPE_SPDIF;
			cfg->dig_outs++;
			break;
		case AC_JACK_SPDIF_IN:
		case AC_JACK_DIG_OTHER_IN:
			cfg->dig_in_pin = nid;
			if (loc == AC_JACK_LOC_HDMI)
				cfg->dig_in_type = HDA_PCM_TYPE_HDMI;
			else
				cfg->dig_in_type = HDA_PCM_TYPE_SPDIF;
			break;
		}
	}

	/* FIX-UP:
	 * If no line-out is defined but multiple HPs are found,
	 * some of them might be the real line-outs.
	 */
	if (!cfg->line_outs && cfg->hp_outs > 1 &&
	    !(cond_flags & HDA_PINCFG_NO_HP_FIXUP)) {
		int i = 0;
		while (i < cfg->hp_outs) {
			/* The real HPs should have the sequence 0x0f */
			if ((sequences_hp[i] & 0x0f) == 0x0f) {
				i++;
				continue;
			}
			/* Move it to the line-out table */
			cfg->line_out_pins[cfg->line_outs] = cfg->hp_pins[i];
			sequences_line_out[cfg->line_outs] = sequences_hp[i];
			cfg->line_outs++;
			cfg->hp_outs--;
			memmove(cfg->hp_pins + i, cfg->hp_pins + i + 1,
				sizeof(cfg->hp_pins[0]) * (cfg->hp_outs - i));
			memmove(sequences_hp + i, sequences_hp + i + 1,
				sizeof(sequences_hp[0]) * (cfg->hp_outs - i));
		}
		memset(cfg->hp_pins + cfg->hp_outs, 0,
		       sizeof(hda_nid_t) * (AUTO_CFG_MAX_OUTS - cfg->hp_outs));
		if (!cfg->hp_outs)
			cfg->line_out_type = AUTO_PIN_HP_OUT;

	}

	/* sort by sequence */
	sort_pins_by_sequence(cfg->line_out_pins, sequences_line_out,
			      cfg->line_outs);
	sort_pins_by_sequence(cfg->speaker_pins, sequences_speaker,
			      cfg->speaker_outs);
	sort_pins_by_sequence(cfg->hp_pins, sequences_hp,
			      cfg->hp_outs);

	/*
	 * FIX-UP: if no line-outs are detected, try to use speaker or HP pin
	 * as a primary output
	 */
	if (!cfg->line_outs &&
	    !(cond_flags & HDA_PINCFG_NO_LO_FIXUP)) {
		if (cfg->speaker_outs) {
			cfg->line_outs = cfg->speaker_outs;
			memcpy(cfg->line_out_pins, cfg->speaker_pins,
			       sizeof(cfg->speaker_pins));
			cfg->speaker_outs = 0;
			memset(cfg->speaker_pins, 0, sizeof(cfg->speaker_pins));
			cfg->line_out_type = AUTO_PIN_SPEAKER_OUT;
		} else if (cfg->hp_outs) {
			cfg->line_outs = cfg->hp_outs;
			memcpy(cfg->line_out_pins, cfg->hp_pins,
			       sizeof(cfg->hp_pins));
			cfg->hp_outs = 0;
			memset(cfg->hp_pins, 0, sizeof(cfg->hp_pins));
			cfg->line_out_type = AUTO_PIN_HP_OUT;
		}
	}

	reorder_outputs(cfg->line_outs, cfg->line_out_pins);
	reorder_outputs(cfg->hp_outs, cfg->hp_pins);
	reorder_outputs(cfg->speaker_outs, cfg->speaker_pins);

	sort_autocfg_input_pins(cfg);

	/*
	 * debug prints of the parsed results
	 */
	snd_printd("autoconfig: line_outs=%d (0x%x/0x%x/0x%x/0x%x/0x%x) type:%s\n",
		   cfg->line_outs, cfg->line_out_pins[0], cfg->line_out_pins[1],
		   cfg->line_out_pins[2], cfg->line_out_pins[3],
		   cfg->line_out_pins[4],
		   cfg->line_out_type == AUTO_PIN_HP_OUT ? "hp" :
		   (cfg->line_out_type == AUTO_PIN_SPEAKER_OUT ?
		    "speaker" : "line"));
	snd_printd("   speaker_outs=%d (0x%x/0x%x/0x%x/0x%x/0x%x)\n",
		   cfg->speaker_outs, cfg->speaker_pins[0],
		   cfg->speaker_pins[1], cfg->speaker_pins[2],
		   cfg->speaker_pins[3], cfg->speaker_pins[4]);
	snd_printd("   hp_outs=%d (0x%x/0x%x/0x%x/0x%x/0x%x)\n",
		   cfg->hp_outs, cfg->hp_pins[0],
		   cfg->hp_pins[1], cfg->hp_pins[2],
		   cfg->hp_pins[3], cfg->hp_pins[4]);
	snd_printd("   mono: mono_out=0x%x\n", cfg->mono_out_pin);
	if (cfg->dig_outs)
		snd_printd("   dig-out=0x%x/0x%x\n",
			   cfg->dig_out_pins[0], cfg->dig_out_pins[1]);
	snd_printd("   inputs:\n");
	for (i = 0; i < cfg->num_inputs; i++) {
		snd_printd("     %s=0x%x\n",
			    hda_get_autocfg_input_label(codec, cfg, i),
			    cfg->inputs[i].pin);
	}
	if (cfg->dig_in_pin)
		snd_printd("   dig-in=0x%x\n", cfg->dig_in_pin);

	return 0;
}
Ejemplo n.º 2
0
/*
 * Parse all pin widgets and store the useful pin nids to cfg
 *
 * The number of line-outs or any primary output is stored in line_outs,
 * and the corresponding output pins are assigned to line_out_pins[],
 * in the order of front, rear, CLFE, side, ...
 *
 * If more extra outputs (speaker and headphone) are found, the pins are
 * assisnged to hp_pins[] and speaker_pins[], respectively.  If no line-out jack
 * is detected, one of speaker of HP pins is assigned as the primary
 * output, i.e. to line_out_pins[0].  So, line_outs is always positive
 * if any analog output exists.
 *
 * The analog input pins are assigned to inputs array.
 * The digital input/output pins are assigned to dig_in_pin and dig_out_pin,
 * respectively.
 */
int snd_hda_parse_pin_defcfg(struct hda_codec *codec,
			     struct auto_pin_cfg *cfg,
			     const hda_nid_t *ignore_nids,
			     unsigned int cond_flags)
{
	hda_nid_t nid;
	short seq, assoc_line_out;
	struct auto_out_pin line_out[ARRAY_SIZE(cfg->line_out_pins)];
	struct auto_out_pin speaker_out[ARRAY_SIZE(cfg->speaker_pins)];
	struct auto_out_pin hp_out[ARRAY_SIZE(cfg->hp_pins)];
	int i;

	if (!snd_hda_get_int_hint(codec, "parser_flags", &i))
		cond_flags = i;

	memset(cfg, 0, sizeof(*cfg));

	memset(line_out, 0, sizeof(line_out));
	memset(speaker_out, 0, sizeof(speaker_out));
	memset(hp_out, 0, sizeof(hp_out));
	assoc_line_out = 0;

	for_each_hda_codec_node(nid, codec) {
		unsigned int wid_caps = get_wcaps(codec, nid);
		unsigned int wid_type = get_wcaps_type(wid_caps);
		unsigned int def_conf;
		short assoc, loc, conn, dev;

		/* read all default configuration for pin complex */
		if (wid_type != AC_WID_PIN)
			continue;
		/* ignore the given nids (e.g. pc-beep returns error) */
		if (ignore_nids && is_in_nid_list(nid, ignore_nids))
			continue;

		def_conf = snd_hda_codec_get_pincfg(codec, nid);
		conn = get_defcfg_connect(def_conf);
		if (conn == AC_JACK_PORT_NONE)
			continue;
		loc = get_defcfg_location(def_conf);
		dev = get_defcfg_device(def_conf);

		/* workaround for buggy BIOS setups */
		if (dev == AC_JACK_LINE_OUT) {
			if (conn == AC_JACK_PORT_FIXED ||
			    conn == AC_JACK_PORT_BOTH)
				dev = AC_JACK_SPEAKER;
		}

		if (!check_pincap_validity(codec, nid, dev))
			continue;

		switch (dev) {
		case AC_JACK_LINE_OUT:
			seq = get_defcfg_sequence(def_conf);
			assoc = get_defcfg_association(def_conf);

			if (!(wid_caps & AC_WCAP_STEREO))
				if (!cfg->mono_out_pin)
					cfg->mono_out_pin = nid;
			if (!assoc)
				continue;
			if (!assoc_line_out)
				assoc_line_out = assoc;
			else if (assoc_line_out != assoc) {
				codec_info(codec,
					   "ignore pin 0x%x with mismatching assoc# 0x%x vs 0x%x\n",
					   nid, assoc, assoc_line_out);
				continue;
			}
			if (cfg->line_outs >= ARRAY_SIZE(cfg->line_out_pins)) {
				codec_info(codec,
					   "ignore pin 0x%x, too many assigned pins\n",
					   nid);
				continue;
			}
			line_out[cfg->line_outs].pin = nid;
			line_out[cfg->line_outs].seq = seq;
			cfg->line_outs++;
			break;
		case AC_JACK_SPEAKER:
			seq = get_defcfg_sequence(def_conf);
			assoc = get_defcfg_association(def_conf);
			if (cfg->speaker_outs >= ARRAY_SIZE(cfg->speaker_pins)) {
				codec_info(codec,
					   "ignore pin 0x%x, too many assigned pins\n",
					   nid);
				continue;
			}
			speaker_out[cfg->speaker_outs].pin = nid;
			speaker_out[cfg->speaker_outs].seq = (assoc << 4) | seq;
			cfg->speaker_outs++;
			break;
		case AC_JACK_HP_OUT:
			seq = get_defcfg_sequence(def_conf);
			assoc = get_defcfg_association(def_conf);
			if (cfg->hp_outs >= ARRAY_SIZE(cfg->hp_pins)) {
				codec_info(codec,
					   "ignore pin 0x%x, too many assigned pins\n",
					   nid);
				continue;
			}
			hp_out[cfg->hp_outs].pin = nid;
			hp_out[cfg->hp_outs].seq = (assoc << 4) | seq;
			cfg->hp_outs++;
			break;
		case AC_JACK_MIC_IN:
			add_auto_cfg_input_pin(codec, cfg, nid, AUTO_PIN_MIC);
			break;
		case AC_JACK_LINE_IN:
			add_auto_cfg_input_pin(codec, cfg, nid, AUTO_PIN_LINE_IN);
			break;
		case AC_JACK_CD:
			add_auto_cfg_input_pin(codec, cfg, nid, AUTO_PIN_CD);
			break;
		case AC_JACK_AUX:
			add_auto_cfg_input_pin(codec, cfg, nid, AUTO_PIN_AUX);
			break;
		case AC_JACK_SPDIF_OUT:
		case AC_JACK_DIG_OTHER_OUT:
			if (cfg->dig_outs >= ARRAY_SIZE(cfg->dig_out_pins)) {
				codec_info(codec,
					   "ignore pin 0x%x, too many assigned pins\n",
					   nid);
				continue;
			}
			cfg->dig_out_pins[cfg->dig_outs] = nid;
			cfg->dig_out_type[cfg->dig_outs] =
				(loc == AC_JACK_LOC_HDMI) ?
				HDA_PCM_TYPE_HDMI : HDA_PCM_TYPE_SPDIF;
			cfg->dig_outs++;
			break;
		case AC_JACK_SPDIF_IN:
		case AC_JACK_DIG_OTHER_IN:
			cfg->dig_in_pin = nid;
			if (loc == AC_JACK_LOC_HDMI)
				cfg->dig_in_type = HDA_PCM_TYPE_HDMI;
			else
				cfg->dig_in_type = HDA_PCM_TYPE_SPDIF;
			break;
		}
	}
Ejemplo n.º 3
0
/*
 * Parse all pin widgets and store the useful pin nids to cfg
 *
 * The number of line-outs or any primary output is stored in line_outs,
 * and the corresponding output pins are assigned to line_out_pins[],
 * in the order of front, rear, CLFE, side, ...
 *
 * If more extra outputs (speaker and headphone) are found, the pins are
 * assisnged to hp_pins[] and speaker_pins[], respectively.  If no line-out jack
 * is detected, one of speaker of HP pins is assigned as the primary
 * output, i.e. to line_out_pins[0].  So, line_outs is always positive
 * if any analog output exists.
 *
 * The analog input pins are assigned to inputs array.
 * The digital input/output pins are assigned to dig_in_pin and dig_out_pin,
 * respectively.
 */
int snd_hda_parse_pin_defcfg(struct hda_codec *codec,
			     struct auto_pin_cfg *cfg,
			     const hda_nid_t *ignore_nids,
			     unsigned int cond_flags)
{
	hda_nid_t nid, end_nid;
	short seq, assoc_line_out;
	struct auto_out_pin line_out[ARRAY_SIZE(cfg->line_out_pins)];
	struct auto_out_pin speaker_out[ARRAY_SIZE(cfg->speaker_pins)];
	struct auto_out_pin hp_out[ARRAY_SIZE(cfg->hp_pins)];
	int i;

	if (!snd_hda_get_int_hint(codec, "parser_flags", &i))
		cond_flags = i;

	memset(cfg, 0, sizeof(*cfg));

	memset(line_out, 0, sizeof(line_out));
	memset(speaker_out, 0, sizeof(speaker_out));
	memset(hp_out, 0, sizeof(hp_out));
	assoc_line_out = 0;

	end_nid = codec->start_nid + codec->num_nodes;
	for (nid = codec->start_nid; nid < end_nid; nid++) {
		unsigned int wid_caps = get_wcaps(codec, nid);
		unsigned int wid_type = get_wcaps_type(wid_caps);
		unsigned int def_conf;
		short assoc, loc, conn, dev;

		/* read all default configuration for pin complex */
		if (wid_type != AC_WID_PIN)
			continue;
		/* ignore the given nids (e.g. pc-beep returns error) */
		if (ignore_nids && is_in_nid_list(nid, ignore_nids))
			continue;

		def_conf = snd_hda_codec_get_pincfg(codec, nid);
		conn = get_defcfg_connect(def_conf);
		if (conn == AC_JACK_PORT_NONE)
			continue;
		loc = get_defcfg_location(def_conf);
		dev = get_defcfg_device(def_conf);

		/* workaround for buggy BIOS setups */
		if (dev == AC_JACK_LINE_OUT) {
			if (conn == AC_JACK_PORT_FIXED ||
			    conn == AC_JACK_PORT_BOTH)
				dev = AC_JACK_SPEAKER;
		}

		if (!check_pincap_validity(codec, nid, dev))
			continue;

		switch (dev) {
		case AC_JACK_LINE_OUT:
			seq = get_defcfg_sequence(def_conf);
			assoc = get_defcfg_association(def_conf);

			if (!(wid_caps & AC_WCAP_STEREO))
				if (!cfg->mono_out_pin)
					cfg->mono_out_pin = nid;
			if (!assoc)
				continue;
			if (!assoc_line_out)
				assoc_line_out = assoc;
			else if (assoc_line_out != assoc)
				continue;
			if (cfg->line_outs >= ARRAY_SIZE(cfg->line_out_pins))
				continue;
			line_out[cfg->line_outs].pin = nid;
			line_out[cfg->line_outs].seq = seq;
			cfg->line_outs++;
			break;
		case AC_JACK_SPEAKER:
			seq = get_defcfg_sequence(def_conf);
			assoc = get_defcfg_association(def_conf);
			if (cfg->speaker_outs >= ARRAY_SIZE(cfg->speaker_pins))
				continue;
			speaker_out[cfg->speaker_outs].pin = nid;
			speaker_out[cfg->speaker_outs].seq = (assoc << 4) | seq;
			cfg->speaker_outs++;
			break;
		case AC_JACK_HP_OUT:
			seq = get_defcfg_sequence(def_conf);
			assoc = get_defcfg_association(def_conf);
			if (cfg->hp_outs >= ARRAY_SIZE(cfg->hp_pins))
				continue;
			hp_out[cfg->hp_outs].pin = nid;
			hp_out[cfg->hp_outs].seq = (assoc << 4) | seq;
			cfg->hp_outs++;
			break;
		case AC_JACK_MIC_IN:
			add_auto_cfg_input_pin(cfg, nid, AUTO_PIN_MIC);
			break;
		case AC_JACK_LINE_IN:
			add_auto_cfg_input_pin(cfg, nid, AUTO_PIN_LINE_IN);
			break;
		case AC_JACK_CD:
			add_auto_cfg_input_pin(cfg, nid, AUTO_PIN_CD);
			break;
		case AC_JACK_AUX:
			add_auto_cfg_input_pin(cfg, nid, AUTO_PIN_AUX);
			break;
		case AC_JACK_SPDIF_OUT:
		case AC_JACK_DIG_OTHER_OUT:
			if (cfg->dig_outs >= ARRAY_SIZE(cfg->dig_out_pins))
				continue;
			cfg->dig_out_pins[cfg->dig_outs] = nid;
			cfg->dig_out_type[cfg->dig_outs] =
				(loc == AC_JACK_LOC_HDMI) ?
				HDA_PCM_TYPE_HDMI : HDA_PCM_TYPE_SPDIF;
			cfg->dig_outs++;
			break;
		case AC_JACK_SPDIF_IN:
		case AC_JACK_DIG_OTHER_IN:
			cfg->dig_in_pin = nid;
			if (loc == AC_JACK_LOC_HDMI)
				cfg->dig_in_type = HDA_PCM_TYPE_HDMI;
			else
				cfg->dig_in_type = HDA_PCM_TYPE_SPDIF;
			break;
		}
	}

	/* Find a pin that could be a headset or headphone mic */
	if (cond_flags & HDA_PINCFG_HEADSET_MIC || cond_flags & HDA_PINCFG_HEADPHONE_MIC) {
		bool hsmic = !!(cond_flags & HDA_PINCFG_HEADSET_MIC);
		bool hpmic = !!(cond_flags & HDA_PINCFG_HEADPHONE_MIC);
		for (i = 0; (hsmic || hpmic) && (i < cfg->num_inputs); i++)
			if (hsmic && can_be_headset_mic(codec, &cfg->inputs[i], 0xc)) {
				cfg->inputs[i].is_headset_mic = 1;
				hsmic = false;
			} else if (hpmic && can_be_headset_mic(codec, &cfg->inputs[i], 0xd)) {
				cfg->inputs[i].is_headphone_mic = 1;
				hpmic = false;
			}

		/* If we didn't find our sequence number mark, fall back to any sequence number */
		for (i = 0; (hsmic || hpmic) && (i < cfg->num_inputs); i++) {
			if (!can_be_headset_mic(codec, &cfg->inputs[i], -1))
				continue;
			if (hsmic) {
				cfg->inputs[i].is_headset_mic = 1;
				hsmic = false;
			} else if (hpmic) {
				cfg->inputs[i].is_headphone_mic = 1;
				hpmic = false;
			}
		}

		if (hsmic)
			snd_printdd("Told to look for a headset mic, but didn't find any.\n");
		if (hpmic)
			snd_printdd("Told to look for a headphone mic, but didn't find any.\n");
	}

	/* FIX-UP:
	 * If no line-out is defined but multiple HPs are found,
	 * some of them might be the real line-outs.
	 */
	if (!cfg->line_outs && cfg->hp_outs > 1 &&
	    !(cond_flags & HDA_PINCFG_NO_HP_FIXUP)) {
		int i = 0;
		while (i < cfg->hp_outs) {
			/* The real HPs should have the sequence 0x0f */
			if ((hp_out[i].seq & 0x0f) == 0x0f) {
				i++;
				continue;
			}
			/* Move it to the line-out table */
			line_out[cfg->line_outs++] = hp_out[i];
			cfg->hp_outs--;
			memmove(hp_out + i, hp_out + i + 1,
				sizeof(hp_out[0]) * (cfg->hp_outs - i));
		}
		memset(hp_out + cfg->hp_outs, 0,
		       sizeof(hp_out[0]) * (AUTO_CFG_MAX_OUTS - cfg->hp_outs));
		if (!cfg->hp_outs)
			cfg->line_out_type = AUTO_PIN_HP_OUT;

	}

	/* sort by sequence */
	sort_pins_by_sequence(cfg->line_out_pins, line_out, cfg->line_outs);
	sort_pins_by_sequence(cfg->speaker_pins, speaker_out,
			      cfg->speaker_outs);
	sort_pins_by_sequence(cfg->hp_pins, hp_out, cfg->hp_outs);

	/*
	 * FIX-UP: if no line-outs are detected, try to use speaker or HP pin
	 * as a primary output
	 */
	if (!cfg->line_outs &&
	    !(cond_flags & HDA_PINCFG_NO_LO_FIXUP)) {
		if (cfg->speaker_outs) {
			cfg->line_outs = cfg->speaker_outs;
			memcpy(cfg->line_out_pins, cfg->speaker_pins,
			       sizeof(cfg->speaker_pins));
			cfg->speaker_outs = 0;
			memset(cfg->speaker_pins, 0, sizeof(cfg->speaker_pins));
			cfg->line_out_type = AUTO_PIN_SPEAKER_OUT;
		} else if (cfg->hp_outs) {
			cfg->line_outs = cfg->hp_outs;
			memcpy(cfg->line_out_pins, cfg->hp_pins,
			       sizeof(cfg->hp_pins));
			cfg->hp_outs = 0;
			memset(cfg->hp_pins, 0, sizeof(cfg->hp_pins));
			cfg->line_out_type = AUTO_PIN_HP_OUT;
		}
	}

	reorder_outputs(cfg->line_outs, cfg->line_out_pins);
	reorder_outputs(cfg->hp_outs, cfg->hp_pins);
	reorder_outputs(cfg->speaker_outs, cfg->speaker_pins);

	/* sort inputs in the order of AUTO_PIN_* type */
	sort(cfg->inputs, cfg->num_inputs, sizeof(cfg->inputs[0]),
	     compare_input_type, NULL);

	/*
	 * debug prints of the parsed results
	 */
	snd_printd("autoconfig: line_outs=%d (0x%x/0x%x/0x%x/0x%x/0x%x) type:%s\n",
		   cfg->line_outs, cfg->line_out_pins[0], cfg->line_out_pins[1],
		   cfg->line_out_pins[2], cfg->line_out_pins[3],
		   cfg->line_out_pins[4],
		   cfg->line_out_type == AUTO_PIN_HP_OUT ? "hp" :
		   (cfg->line_out_type == AUTO_PIN_SPEAKER_OUT ?
		    "speaker" : "line"));
	snd_printd("   speaker_outs=%d (0x%x/0x%x/0x%x/0x%x/0x%x)\n",
		   cfg->speaker_outs, cfg->speaker_pins[0],
		   cfg->speaker_pins[1], cfg->speaker_pins[2],
		   cfg->speaker_pins[3], cfg->speaker_pins[4]);
	snd_printd("   hp_outs=%d (0x%x/0x%x/0x%x/0x%x/0x%x)\n",
		   cfg->hp_outs, cfg->hp_pins[0],
		   cfg->hp_pins[1], cfg->hp_pins[2],
		   cfg->hp_pins[3], cfg->hp_pins[4]);
	snd_printd("   mono: mono_out=0x%x\n", cfg->mono_out_pin);
	if (cfg->dig_outs)
		snd_printd("   dig-out=0x%x/0x%x\n",
			   cfg->dig_out_pins[0], cfg->dig_out_pins[1]);
	snd_printd("   inputs:\n");
	for (i = 0; i < cfg->num_inputs; i++) {
		snd_printd("     %s=0x%x\n",
			    hda_get_autocfg_input_label(codec, cfg, i),
			    cfg->inputs[i].pin);
	}
	if (cfg->dig_in_pin)
		snd_printd("   dig-in=0x%x\n", cfg->dig_in_pin);

	return 0;
}