static void
n900audjck_attach(device_t parent, device_t self, void *aux)
{
struct n900audjck_softc *sc = device_private(self);
struct gpio_attach_args *ga = aux;
int caps;
sc->sc_dev = self;
sc->sc_gpio = ga->ga_gpio;
/* map pins */
sc->sc_map.pm_map = sc->sc_map_pins;
if (gpio_pin_map(sc->sc_gpio, ga->ga_offset, ga->ga_mask,
&sc->sc_map)) {
aprint_error(": couldn't map the pins\n");
return;
}
/* configure the input pin */
caps = gpio_pin_caps(sc->sc_gpio, &sc->sc_map, N900AUDJCK_PIN_INPUT);
if (!(caps & GPIO_PIN_INPUT)) {
aprint_error(": pin is unable to read input\n");
gpio_pin_unmap(sc->sc_gpio, &sc->sc_map);
return;
}
gpio_pin_ctl(sc->sc_gpio, &sc->sc_map, N900AUDJCK_PIN_INPUT,
GPIO_PIN_INPUT);
sc->sc_intr = intr_establish(N900AUDJCK_GPIO_BASE + ga->ga_offset,
IPL_VM, IST_EDGE_BOTH, n900audjck_intr, sc);
if (sc->sc_intr == NULL) {
aprint_error(": couldn't establish interrupt\n");
gpio_pin_unmap(sc->sc_gpio, &sc->sc_map);
return;
}
aprint_normal(": N900 audio jack\n");
aprint_naive(": N900 audio jack\n");
if (!pmf_device_register(sc->sc_dev, NULL, NULL)) {
aprint_error_dev(sc->sc_dev,
"couldn't establish power handler\n");
}
sysmon_task_queue_init();
sc->sc_smpsw.smpsw_name = device_xname(self);
sc->sc_smpsw.smpsw_type = PSWITCH_TYPE_HOTKEY;
sc->sc_state = PSWITCH_EVENT_RELEASED;
sysmon_pswitch_register(&sc->sc_smpsw);
/* report an event immediately if an audio jack is inserted */
n900audjck_refresh(sc);
}
void
gpioiic_attach(device_t parent, device_t self, void *aux)
{
struct gpioiic_softc *sc = device_private(self);
struct gpio_attach_args *ga = aux;
struct i2cbus_attach_args iba;
int caps;
/* Map pins */
sc->sc_gpio = ga->ga_gpio;
sc->sc_map.pm_map = sc->_map;
if (gpio_pin_map(sc->sc_gpio, ga->ga_offset, ga->ga_mask,
&sc->sc_map)) {
aprint_error(": can't map pins\n");
return;
}
if (ga->ga_flags & GPIOIIC_PIN_REVERSE) {
sc->sc_pin_sda = GPIOIIC_PIN_SCL;
sc->sc_pin_scl = GPIOIIC_PIN_SDA;
} else {
sc->sc_pin_sda = GPIOIIC_PIN_SDA;
sc->sc_pin_scl = GPIOIIC_PIN_SCL;
}
/* Configure SDA pin */
caps = gpio_pin_caps(sc->sc_gpio, &sc->sc_map, sc->sc_pin_sda);
if (!(caps & GPIO_PIN_OUTPUT)) {
aprint_error(": SDA pin is unable to drive output\n");
goto fail;
}
if (!(caps & GPIO_PIN_INPUT)) {
aprint_error(": SDA pin is unable to read input\n");
goto fail;
}
aprint_normal(": SDA[%d]", sc->sc_map.pm_map[sc->sc_pin_sda]);
sc->sc_sda = GPIO_PIN_OUTPUT;
if (caps & GPIO_PIN_OPENDRAIN) {
aprint_normal(" open-drain");
sc->sc_sda |= GPIO_PIN_OPENDRAIN;
} else if ((caps & GPIO_PIN_PUSHPULL) && (caps & GPIO_PIN_TRISTATE)) {
aprint_normal(" push-pull tri-state");
sc->sc_sda |= GPIO_PIN_PUSHPULL;
}
if (caps & GPIO_PIN_PULLUP) {
aprint_normal(" pull-up");
sc->sc_sda |= GPIO_PIN_PULLUP;
}
gpio_pin_ctl(sc->sc_gpio, &sc->sc_map, sc->sc_pin_sda, sc->sc_sda);
/* Configure SCL pin */
caps = gpio_pin_caps(sc->sc_gpio, &sc->sc_map, sc->sc_pin_scl);
if (!(caps & GPIO_PIN_OUTPUT)) {
aprint_error(": SCL pin is unable to drive output\n");
goto fail;
}
aprint_normal(", SCL[%d]", sc->sc_map.pm_map[sc->sc_pin_scl]);
sc->sc_scl = GPIO_PIN_OUTPUT;
if (caps & GPIO_PIN_OPENDRAIN) {
aprint_normal(" open-drain");
sc->sc_scl |= GPIO_PIN_OPENDRAIN;
if (caps & GPIO_PIN_PULLUP) {
aprint_normal(" pull-up");
sc->sc_scl |= GPIO_PIN_PULLUP;
}
} else if (caps & GPIO_PIN_PUSHPULL) {
aprint_normal(" push-pull");
sc->sc_scl |= GPIO_PIN_PUSHPULL;
}
gpio_pin_ctl(sc->sc_gpio, &sc->sc_map, sc->sc_pin_scl, sc->sc_scl);
aprint_normal("\n");
/* Attach I2C bus */
rw_init(&sc->sc_i2c_lock);
sc->sc_i2c_tag.ic_cookie = sc;
sc->sc_i2c_tag.ic_acquire_bus = gpioiic_i2c_acquire_bus;
sc->sc_i2c_tag.ic_release_bus = gpioiic_i2c_release_bus;
sc->sc_i2c_tag.ic_send_start = gpioiic_i2c_send_start;
sc->sc_i2c_tag.ic_send_stop = gpioiic_i2c_send_stop;
sc->sc_i2c_tag.ic_initiate_xfer = gpioiic_i2c_initiate_xfer;
sc->sc_i2c_tag.ic_read_byte = gpioiic_i2c_read_byte;
sc->sc_i2c_tag.ic_write_byte = gpioiic_i2c_write_byte;
sc->sc_i2c_tag.ic_exec = NULL;
memset(&iba, 0, sizeof(iba));
iba.iba_type = I2C_TYPE_SMBUS;
iba.iba_tag = &sc->sc_i2c_tag;
sc->sc_i2c_dev = config_found(self, &iba, iicbus_print);
if (!pmf_device_register(self, NULL, NULL))
aprint_error("%s: could not establish power handler\n",
device_xname(self));
return;
fail:
gpio_pin_unmap(sc->sc_gpio, &sc->sc_map);
}
void
gpioow_attach(struct device *parent, struct device *self, void *aux)
{
struct gpioow_softc *sc = (struct gpioow_softc *)self;
struct gpio_attach_args *ga = aux;
struct onewirebus_attach_args oba;
int caps;
/* Check that we have enough pins */
if (gpio_npins(ga->ga_mask) != GPIOOW_NPINS) {
printf(": invalid pin mask\n");
return;
}
/* Map pins */
sc->sc_gpio = ga->ga_gpio;
sc->sc_map.pm_map = sc->__map;
if (gpio_pin_map(sc->sc_gpio, ga->ga_offset, ga->ga_mask,
&sc->sc_map)) {
printf(": can't map pins\n");
return;
}
/* Configure data pin */
caps = gpio_pin_caps(sc->sc_gpio, &sc->sc_map, GPIOOW_PIN_DATA);
if (!(caps & GPIO_PIN_OUTPUT)) {
printf(": data pin is unable to drive output\n");
goto fail;
}
if (!(caps & GPIO_PIN_INPUT)) {
printf(": data pin is unable to read input\n");
goto fail;
}
printf(": DATA[%d]", sc->sc_map.pm_map[GPIOOW_PIN_DATA]);
sc->sc_data = GPIO_PIN_OUTPUT;
if (caps & GPIO_PIN_OPENDRAIN) {
printf(" open-drain");
sc->sc_data |= GPIO_PIN_OPENDRAIN;
} else if ((caps & GPIO_PIN_PUSHPULL) && (caps & GPIO_PIN_TRISTATE)) {
printf(" push-pull tri-state");
sc->sc_data |= GPIO_PIN_PUSHPULL;
}
if (caps & GPIO_PIN_PULLUP) {
printf(" pull-up");
sc->sc_data |= GPIO_PIN_PULLUP;
}
gpio_pin_ctl(sc->sc_gpio, &sc->sc_map, GPIOOW_PIN_DATA, sc->sc_data);
printf("\n");
/* Attach 1-Wire bus */
sc->sc_ow_bus.bus_cookie = sc;
sc->sc_ow_bus.bus_reset = gpioow_ow_reset;
sc->sc_ow_bus.bus_bit = gpioow_ow_bit;
bzero(&oba, sizeof(oba));
oba.oba_bus = &sc->sc_ow_bus;
sc->sc_ow_dev = config_found(self, &oba, onewirebus_print);
return;
fail:
gpio_pin_unmap(sc->sc_gpio, &sc->sc_map);
}
static void
mousebtn_attach(device_t parent, device_t self, void *aux)
{
struct mousebtn_softc *sc = device_private(self);
struct gpio_attach_args *ga = aux;
int caps;
struct wsmousedev_attach_args a;
sc->sc_dev = self;
sc->sc_gpio = ga->ga_gpio;
/* map pins */
sc->sc_map.pm_map = sc->sc_map_pins;
if (gpio_pin_map(sc->sc_gpio, ga->ga_offset, ga->ga_mask,
&sc->sc_map)) {
aprint_error(": couldn't map the pins\n");
return;
}
/* configure left pin */
caps = gpio_pin_caps(sc->sc_gpio, &sc->sc_map, MOUSEBTN_PIN_LEFT);
if (!(caps & GPIO_PIN_INPUT)) {
aprint_error(": pin is unable to read input\n");
gpio_pin_unmap(sc->sc_gpio, &sc->sc_map);
return;
}
gpio_pin_ctl(sc->sc_gpio, &sc->sc_map, MOUSEBTN_PIN_LEFT,
GPIO_PIN_INPUT);
/* configure right pin */
caps = gpio_pin_caps(sc->sc_gpio, &sc->sc_map, MOUSEBTN_PIN_RIGHT);
if (!(caps & GPIO_PIN_INPUT)) {
aprint_error(": pin is unable to read input\n");
gpio_pin_unmap(sc->sc_gpio, &sc->sc_map);
return;
}
gpio_pin_ctl(sc->sc_gpio, &sc->sc_map, MOUSEBTN_PIN_RIGHT,
GPIO_PIN_INPUT);
/* interrupt settings */
sc->sc_intr[0] = intr_establish(GPIO1_BASE + ga->ga_offset,
IPL_VM, IST_EDGE_BOTH, mousebtn_intr, sc);
if (sc->sc_intr[0] == NULL) {
aprint_error(": couldn't establish interrupt\n");
return;
}
sc->sc_intr[1] = intr_establish(GPIO1_BASE + ga->ga_offset + 1,
IPL_VM, IST_EDGE_BOTH, mousebtn_intr, sc);
if (sc->sc_intr[1] == NULL) {
aprint_error(": couldn't establish interrupt\n");
intr_disestablish(sc->sc_intr[0]);
return;
}
aprint_normal(": NetWalker mouse button\n");
aprint_naive(": NetWalker mouse button\n");
mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_NONE);
callout_init(&sc->sc_c, 0);
a.accessops = &mousebtn_accessops;
a.accesscookie = sc;
sc->sc_buttons = 0;
sc->sc_wsmousedev = config_found(self, &a, wsmousedevprint);
}
