static int ticalypso_initsettings(struct gsmd *g)
{
int rc = 0;
struct gsmd_atcmd *cmd;
/* use +CTZR: to report time zone changes */
rc |= gsmd_simplecmd(g, "AT+CTZR=1");
/* use %CTZV: Report time and date */
rc |= gsmd_simplecmd(g, "AT%CTZV=1");
/* use %CGREG */
//rc |= gsmd_simplecmd(g, "AT%CGREG=3");
/* enable %CPRI: ciphering indications */
rc |= gsmd_simplecmd(g, "AT%CPRI=1");
/* enable %CSQ: signal quality reports */
rc |= gsmd_simplecmd(g, "AT%CSQ=1");
/* send unsolicited commands at any time */
rc |= gsmd_simplecmd(g, "AT%CUNS=0");
/* enable %CPI: call progress indication */
cmd = atcmd_fill("AT%CPI=?", 9, &cpi_detect_cb, g, 0, NULL);
if (cmd)
atcmd_submit(g, cmd);
return rc;
}
static int siemens_initsettings(struct gsmd *g)
{
int rc = 0;
/* reset the second mux channel to factory defaults */
rc |= gsmd_simplecmd(g, "AT&F2");
/* setup Mobile error reporting, mode=3 - buffer unsolic messages in TE
1 - indicator event reporting using result code +CIEV: */
rc |= gsmd_simplecmd(g, "AT+CMER=3,0,0,1,0");
/* ignore DTR line (on mux0! - channel 1)*/
// rc |= gsmd_simplecmd(g, "AT&D0");
/* enable ^SACD: Accessory Indicators */
rc |= gsmd_simplecmd(g, "AT^SACD=3");
return rc;
}
int gsmd_initsettings2(struct gsmd *gsmd)
{
int rc = 0;
if (gsmd->vendorpl && gsmd->vendorpl->initsettings)
rc |= gsmd->vendorpl->initsettings(gsmd);
/* echo off, display acknowledgments as text */
// rc |= gsmd_simplecmd(gsmd, "ATE0V1");
rc |= gsmd_simplecmd(gsmd, "ATE0");
/* use +CME ERROR: instead of ERROR */
rc |= gsmd_simplecmd(gsmd, "AT+CMEE=1");
return rc;
}
static int siemens_initsettings_slow(struct gsmd *g)
{
int rc = 0;
/* reset the mux 3 channel to factory defaults */
rc |= gsmd_simplecmd(g, "AT&F3");
return rc;
}
static int siemens_initsettings(struct gsmd *gsmd)
{
int rc = 0;
struct gsmd_atcmd *cmd;
u_int8_t channel;
//rc |= gsmd_simplecmd(gsmd, "AT&F"); // JIM resets the TC65 - cannot be done from siemens plugin
// Added by Jim - need to be in place from the start
/* use +CSMS: to set phase 2+ */
// Call status event reporting
rc |= gsmd_notification_cmd(gsmd, "AT^SLCC=1", PIN_DEPENDENT);
rc |= gsmd_notification_cmd(gsmd, "AT^SIND=\"audio\",1", PIN_DEPENDENT);
#ifdef USING_TDC_DEV_BOARD
// dev boards use default AT^SAIC=2,1,1
#else
// TCL SL40 uses analog, mic 2 & earpiece 2
rc |= gsmd_simplecmd(gsmd, "AT^SNFS=2", NO_PIN_DEPEND);
// factory defaults for SNFS 2 should same as
// rc |= gsmd_simplecmd(gsmd, "AT^SAIC=2,2,2", NO_PIN_DEPEND);
#endif
// Set the default DTMF tone duration (10 10ths i.e 1 second)
rc |= gsmd_simplecmd(gsmd, "AT+VTD=10", PIN_DEPENDENT);
// AT+CSMS=1 must be passed down the same channel as the AT+CNMI
// This SIM command may be delayed if the SIM is busy
rc |= sim_notification_cmd(gsmd, 0,0);
//JIM - for now we don't process cell broadcast messages
rc |= gsmd_notification_cmd(gsmd, "AT+CNMI=2,2,0,1,1",PIN_DEPENDENT);
// Force a creg lookup. MC55i doesn't appear to always give a CREG notification after
// pin verification and auto operator selection
rc |= query_network_status(gsmd);
for (channel = GSMD_CMD_CHANNEL0; channel < gsmd->number_channels; channel++) {
/* Siemens sometimes sends LFLF instead of CRLF */
gsmd->llp[channel].flags |= LGSM_ATCMD_F_LFLF;
}
return rc;
}
/* these commands require PIN to be READY */
int gsmd_initsettings_after_pin(struct gsmd *gsmd)
{
int rc = 0;
/* enable +CREG: unsolicited response if registration status changes */
rc |= gsmd_simplecmd(gsmd, "AT+CREG=2");
/* use +CRING instead of RING */
rc |= gsmd_simplecmd(gsmd, "AT+CRC=1");
/* use +CLIP: to indicate CLIP */
rc |= gsmd_simplecmd(gsmd, "AT+CLIP=1");
/* use +COLP: to indicate COLP */
/* set it 0 to disable subscriber info and avoid cme err 512 ?FIXME? */
rc |= gsmd_simplecmd(gsmd, "AT+COLP=1");
/* use +CCWA: to indicate waiting call */
rc |= gsmd_simplecmd(gsmd, "AT+CCWA=1");
/* activate the unsolicited reporting of CCM value */
rc |= gsmd_simplecmd(gsmd, "AT+CAOC=2");
/* get imsi */
atcmd_submit(gsmd, atcmd_fill("AT+CIMI", 0, &gsmd_get_imsi_cb, gsmd, 0, NULL));
sms_cb_init(g_slow);
if (gsmd->vendorpl && gsmd->vendorpl->initsettings_after_pin)
return gsmd->vendorpl->initsettings_after_pin(gsmd);
else
return rc;
}
static int cpi_detect_cb(struct gsmd_atcmd *cmd, void *ctx, char *resp)
{
struct gsmd *g = ctx;
struct gsm_extrsp *er;
if (strncmp(resp, "%CPI: ", 6))
return -EINVAL;
resp += 6;
er = extrsp_parse(cmd, resp);
if (!er)
return -EINVAL;
if (extrsp_supports(er, 0, 3))
return gsmd_simplecmd(g, "AT%CPI=3");
else if (extrsp_supports(er, 0, 2))
return gsmd_simplecmd(g, "AT%CPI=2");
else
DEBUGP("Call Progress Indication mode 2 or 3 not supported!!\n");
talloc_free(er);
return 0;
}