/**
* First init
*/
static void firstInit(void) {
//Hardware init
GPIO_init();
USART1_init();//midi
USART6_init();//debug
usb_midi_init(); //Init everything for midiUSB
ADC_init_all(); //ADC init
SD_DMA_activate();
//Display
delayms(400);
#ifdef WS0010_GRAPHICS
hd44780_init();
hd44780_display( HD44780_DISP_ON, HD44780_DISP_CURS_OFF, HD44780_DISP_BLINK_OFF);
ws0010_Graphics_mode();
ws0010_Draw_buffer(pictureVMK188);
delayms(20000);
ws0010_Character_mode();
hd44780_init();
#else
hd44780_init();
hd44780_display( HD44780_DISP_ON, HD44780_DISP_CURS_OFF, HD44780_DISP_BLINK_OFF);
hd44780_message_center(APP_NAME, 1);
hd44780_message_center(APP_VERSION, 2);
delayms(3000);
#endif
}
int main(void)
{
char msg[]="A nice long message for you to read !!!!"
"A second very long message to read :) !!";
/* set up systick */
if(SysTick_Config(SystemCoreClock/1000))
{
while(1);
}
/* set the pins up */
init_io();
/* start the lcd */
hd44780_init();
hd44780_write_string(msg);
while(1)
{
delayms(300);
hd44780_shift(0,1);
}
return 0;
}
int16_t parse_cmd_lcd_init(char *cmd, char *output, uint16_t len)
{
uint8_t cursor, blink;
#ifdef TEENSY_SUPPORT
/* Skip leading spaces. */
while(*cmd == ' ') cmd ++;
/* Seek space (blink argument), chop and atoi to `blink'. */
char *p = cmd;
while(*p && *p != ' ') p ++;
if(!*p)
return ECMD_ERR_PARSE_ERROR; /* Required argument `blink' missing. */
*p = 0;
blink = atoi(p + 1);
cursor = atoi(cmd);
#else
int ret = sscanf_P(cmd, PSTR("%hhu %hhu"), &cursor, &blink);
if(ret != 2)
return ECMD_ERR_PARSE_ERROR;
#endif
hd44780_init();
hd44780_config(cursor, blink,1);
return ECMD_FINAL_OK;
}
/*
* Setup the LCD controller. First, call the hardware initialization
* function, then adjust the display attributes we want.
*/
void
lcd_init(void)
{
hd44780_init();
/*
* Clear the display.
*/
hd44780_outcmd(HD44780_CLR);
hd44780_wait_ready();
/*
* Entry mode: auto-increment address counter, no display shift in
* effect.
*/
hd44780_outcmd(HD44780_ENTMODE(1, 0));
hd44780_wait_ready();
/*
* Enable display, activate non-blinking cursor.
*/
hd44780_outcmd(HD44780_DISPCTL(1, 1, 0));
hd44780_wait_ready();
}
void main(void) {
// lcd display
struct dev_hd44780_ctx lcd_ctx;
memset((void *)&lcd_ctx, 0x00, sizeof(struct dev_hd44780_ctx));
lcd_ctx.rs.port = &LCD_RS_PORT;
lcd_ctx.rs.pin = LCD_RS_PIN;
lcd_ctx.e.port = &LCD_E_PORT;
lcd_ctx.e.pin = LCD_E_PIN;
// setup data lines
for (uint8_t x = 0; x<4; x++) {
lcd_ctx.data[x].port = &LCD_DB_PORT;
lcd_ctx.data[x].pin = LCD_DB_PIN_FIRST + x;
}
// display specifics
lcd_ctx.lines = LCD_NUMBER_OF_LINES;
lcd_ctx.font = HD44780_FONT_5X8;
// initialize the device
hd44780_init(&lcd_ctx);
// clear the display initially
hd44780_clrscr(&lcd_ctx);
hd44780_goto(&lcd_ctx, 0x00);
hd44780_puts(&lcd_ctx, "Hello World");
// execution loop
for (;;);
}
void LcdLogic::wireHook(avr_t *avr)
{
this->avr = avr;
hd44780_init(avr, &hd44780, WIDTH, HEIGHT, this, LcdLogic::displayChanged);
/* Connect data lines to Port C, 4-7 (bidirectional). */
for (int i = 0; i < 4; i++) {
avr_irq_t * iavr = avr_io_getirq(avr, AVR_IOCTL_IOPORT_GETIRQ('C'), 4 + i);
avr_irq_t * ilcd = hd44780.irq + IRQ_HD44780_D4 + i;
// AVR -> LCD
avr_connect_irq(iavr, ilcd);
// LCD -> AVR
avr_connect_irq(ilcd, iavr);
}
avr_connect_irq(avr_io_getirq(avr, AVR_IOCTL_IOPORT_GETIRQ('C'), 2),
hd44780.irq + IRQ_HD44780_RS);
avr_connect_irq(avr_io_getirq(avr, AVR_IOCTL_IOPORT_GETIRQ('C'), 3),
hd44780.irq + IRQ_HD44780_E);
/* RW is set to GND. */
avr_vcd_init(avr, "lcd.vcd", &vcdFile, 100000);
avr_vcd_add_signal(&vcdFile,
avr_io_getirq(avr, AVR_IOCTL_IOPORT_GETIRQ('C'), IOPORT_IRQ_PIN_ALL),
4 /* bits */, "D4-D7");
avr_vcd_add_signal(&vcdFile,
avr_io_getirq(avr, AVR_IOCTL_IOPORT_GETIRQ('C'), 2),
1 /* bits */, "RS");
avr_vcd_add_signal(&vcdFile,
avr_io_getirq(avr, AVR_IOCTL_IOPORT_GETIRQ('C'), 3),
1 /* bits */, "E");
}
int16_t main(void)
{
char c = 'g';
/* Configure the oscillator for the device */
ConfigureOscillator();
/* Initialize IO ports and peripherals */
InitApp();
hd44780_init(N_2LINE,FONT_8);
//hd44780_setCursorPosition(0, 0);
hd44780_write_char(' ');
hd44780_write_char('G');
hd44780_write_char('K');
hd44780_write_string("hat DE Lieb");
while(1)
{
if(UART1RXRdy()==1){//check for data waiting
c=UART1RX();//get the character
if(c=='0')
{
T1CONbits.TON = ~T1CONbits.TON; /* enable Timer 1 and start the count */
if(!T1CONbits.TON) //if timer is off, turn off LED
{
UART1TX('T');
UART1TX('1');
UART1TX('-');
UART1TX('O');
UART1TX('F');
UART1TX('F');
UART1TX('\n');
UART1TX('\r');
MSLED_O = 0;
}
else
{
UART1TX('T');
UART1TX('1');
UART1TX('-');
UART1TX('O');
UART1TX('N');
UART1TX('\n');
UART1TX('\r');
MSLED_O=1;
}
}
else
{
UART1TX(c);//echo the character back
hd44780_write_char(c);
}
}
}
}
void user_init(void)
{
uart_set_baud(0, 115200);
printf("SDK version:%s\n", sdk_system_get_sdk_version());
i2c_init(I2C_BUS, SCL_PIN, SDA_PIN, I2C_FREQ_100K);
hd44780_t lcd = {
.i2c_dev.bus = I2C_BUS,
.i2c_dev.addr = ADDR,
.font = HD44780_FONT_5X8,
.lines = 2,
.pins = {
.rs = 0,
.e = 2,
.d4 = 4,
.d5 = 5,
.d6 = 6,
.d7 = 7,
.bl = 3
},
.backlight = true
};
hd44780_init(&lcd);
hd44780_upload_character(&lcd, 0, char_data);
hd44780_upload_character(&lcd, 1, char_data + 8);
hd44780_gotoxy(&lcd, 0, 0);
hd44780_puts(&lcd, "\x08 Hello world!");
hd44780_gotoxy(&lcd, 0, 1);
hd44780_puts(&lcd, "\x09 ");
char time[16];
while (true)
{
hd44780_gotoxy(&lcd, 2, 1);
snprintf(time, 7, "%u ", sdk_system_get_time() / 1000000);
time[sizeof(time) - 1] = 0;
hd44780_puts(&lcd, time);
for (uint32_t i = 0; i < 1000; i++)
sdk_os_delay_us(1000);
}
}
int main()
{
hd44780_init();
/*
* Clear the display.
*/
hd44780_outcmd(HD44780_CLR);
hd44780_wait_ready(1); // long wait
/*
* Entry mode: auto-increment address counter, no display shift in effect.
*/
hd44780_outcmd(HD44780_ENTMODE(1, 0));
hd44780_wait_ready(0);
/*
* Enable display, activate non-blinking cursor.
*/
hd44780_outcmd(HD44780_DISPCTL(1, 1, 0));
hd44780_wait_ready(0);
EICRA = (1 << ISC00);
EIMSK = (1 << INT0);
sei();
while (1) {
while (!update_needed)
sleep_mode();
update_needed = 0;
char buffer[16];
hd44780_outcmd(HD44780_CLR);
hd44780_wait_ready(1); // long wait
hd44780_outcmd(HD44780_DDADDR(4));
hd44780_wait_ready(0);
sprintf(buffer, "%2d:%02d:%02d", hour, minute, second);
char *s = buffer;
while (*s) {
hd44780_outdata(*s++);
hd44780_wait_ready(0);
}
}
}
/** Inicjalizacja urządzeń wejścia / wyjścia.
*/
void ioinit(void)
{
uint8_t i;
hd44780_init();
hd44780_outcmd(HD44780_CLR);
hd44780_wait_ready();
hd44780_outcmd(HD44780_ENTMODE(1, 0));
hd44780_wait_ready();
hd44780_outcmd(HD44780_DISPCTL(1, 1, 1));
hd44780_wait_ready();
hd44780_outcmd(HD44780_CGADDR(0));
for(i=0; i<64; i++) {
hd44780_outdata(pgm_read_byte(&extraChar[i]));
}
TCCR1B = _BV(WGM12) | _BV(CS11); // licznik / 8 - wyzerwoanie na porownanie
TIMSK = _BV(OCIE1A); // przerwanie na porownanie wartosci
OCR1A = TAU1; // warto licznika porownania
usart_init(UBRR_VALUE);
onewire_init();
twi_init();
outputs_init();
top_off_init();
qbuttons_init();
ui_init();
BUZZER_DDR |= _BV(BUZZER_SWITCH);
buzzer_off();
wdt_enable(WDTO_2S);
}