static int hdmi_power_on_full(struct omap_dss_device *dssdev)
{
int r;
struct omap_video_timings *p;
struct omap_overlay_manager *mgr = hdmi.output.manager;
struct dss_pll_clock_info hdmi_cinfo = { 0 };
r = hdmi_power_on_core(dssdev);
if (r)
return r;
p = &hdmi.cfg.timings;
DSSDBG("hdmi_power_on x_res= %d y_res = %d\n", p->x_res, p->y_res);
hdmi_pll_compute(&hdmi.pll, p->pixelclock, &hdmi_cinfo);
/* disable and clear irqs */
hdmi_wp_clear_irqenable(&hdmi.wp, 0xffffffff);
hdmi_wp_set_irqstatus(&hdmi.wp,
hdmi_wp_get_irqstatus(&hdmi.wp));
r = dss_pll_enable(&hdmi.pll.pll);
if (r) {
DSSERR("Failed to enable PLL\n");
goto err_pll_enable;
}
r = dss_pll_set_config(&hdmi.pll.pll, &hdmi_cinfo);
if (r) {
DSSERR("Failed to configure PLL\n");
goto err_pll_cfg;
}
r = hdmi_phy_configure(&hdmi.phy, hdmi_cinfo.clkdco,
hdmi_cinfo.clkout[0]);
if (r) {
DSSDBG("Failed to start PHY\n");
goto err_phy_cfg;
}
r = hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_LDOON);
if (r)
goto err_phy_pwr;
hdmi5_configure(&hdmi.core, &hdmi.wp, &hdmi.cfg);
/* bypass TV gamma table */
dispc_enable_gamma_table(0);
/* tv size */
dss_mgr_set_timings(mgr, p);
r = hdmi_wp_video_start(&hdmi.wp);
if (r)
goto err_vid_enable;
r = dss_mgr_enable(mgr);
if (r)
goto err_mgr_enable;
hdmi_wp_set_irqenable(&hdmi.wp,
HDMI_IRQ_LINK_CONNECT | HDMI_IRQ_LINK_DISCONNECT);
return 0;
err_mgr_enable:
hdmi_wp_video_stop(&hdmi.wp);
err_vid_enable:
hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
err_phy_pwr:
err_phy_cfg:
err_pll_cfg:
dss_pll_disable(&hdmi.pll.pll);
err_pll_enable:
hdmi_power_off_core(dssdev);
return -EIO;
}
static int hdmi_power_on_full(struct omap_dss_device *dssdev)
{
int r;
struct omap_video_timings *p;
struct omap_overlay_manager *mgr = hdmi.output.manager;
struct dss_pll_clock_info hdmi_cinfo = { 0 };
r = hdmi_power_on_core(dssdev);
if (r)
return r;
p = &hdmi.cfg.timings;
DSSDBG("hdmi_power_on x_res= %d y_res = %d\n", p->x_res, p->y_res);
hdmi_pll_compute(&hdmi.pll, p->pixelclock, &hdmi_cinfo);
/* disable and clear irqs */
hdmi_wp_clear_irqenable(&hdmi.wp, 0xffffffff);
hdmi_wp_set_irqstatus(&hdmi.wp,
hdmi_wp_get_irqstatus(&hdmi.wp));
r = dss_pll_enable(&hdmi.pll.pll);
if (r) {
DSSERR("Failed to enable PLL\n");
goto err_pll_enable;
}
r = dss_pll_set_config(&hdmi.pll.pll, &hdmi_cinfo);
if (r) {
DSSERR("Failed to configure PLL\n");
goto err_pll_cfg;
}
r = hdmi_phy_configure(&hdmi.phy, hdmi_cinfo.clkdco,
hdmi_cinfo.clkout[0]);
if (r) {
DSSDBG("Failed to start PHY\n");
goto err_phy_cfg;
}
r = hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_LDOON);
if (r)
goto err_phy_pwr;
hdmi5_configure(&hdmi.core, &hdmi.wp, &hdmi.cfg);
/* bypass TV gamma table */
dispc_enable_gamma_table(0);
/* tv size */
dss_mgr_set_timings(mgr, p);
r = hdmi_wp_video_start(&hdmi.wp);
if (r)
goto err_vid_enable;
/*
* XXX Seems that on we easily get a flood of sync-lost errors when
* enabling the output. This seems to be related to the time between
* HDMI VSYNC and enabling the DISPC output.
*
* Testing shows that the sync-lost errors do not happen if we enable
* the DISPC output very soon after HDMI VBLANK. So wait here for
* VBLANK to reduce the chances of sync-losts.
*/
hdmi_write_reg(hdmi.wp.base, HDMI_WP_IRQSTATUS, HDMI_IRQ_VIDEO_VSYNC);
while (true) {
u32 v = hdmi_read_reg(hdmi.wp.base, HDMI_WP_IRQSTATUS_RAW);
if (v & HDMI_IRQ_VIDEO_VSYNC)
break;
usleep_range(500, 1000);
}
r = dss_mgr_enable(mgr);
if (r)
goto err_mgr_enable;
hdmi_wp_set_irqenable(&hdmi.wp,
HDMI_IRQ_LINK_CONNECT | HDMI_IRQ_LINK_DISCONNECT);
return 0;
err_mgr_enable:
hdmi_wp_video_stop(&hdmi.wp);
err_vid_enable:
hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
err_phy_pwr:
err_phy_cfg:
err_pll_cfg:
dss_pll_disable(&hdmi.pll.pll);
err_pll_enable:
hdmi_power_off_core(dssdev);
return -EIO;
}
