int __devinit
setup_bkm_a4t(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
char tmp[64];
u_int pci_memaddr = 0, found = 0;
int ret;
strcpy(tmp, bkm_a4t_revision);
printk(KERN_INFO "HiSax: T-Berkom driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ == ISDN_CTYPE_BKM_A4T) {
cs->subtyp = BKM_A4T;
} else
return (0);
while ((dev_a4t = hisax_find_pci_device(PCI_VENDOR_ID_ZORAN,
PCI_DEVICE_ID_ZORAN_36120, dev_a4t))) {
ret = a4t_pci_probe(dev_a4t, cs, &found, &pci_memaddr);
if (!ret)
return (0);
if (ret > 0)
break;
}
if (!found) {
printk(KERN_WARNING "HiSax: Telekom A4T: Card not found\n");
return (0);
}
if (!pci_memaddr) {
printk(KERN_WARNING "HiSax: Telekom A4T: "
"No Memory base address\n");
return (0);
}
return a4t_cs_init(card, cs, pci_memaddr);
}
/* called by config.c */
int __devinit
setup_enternow_pci(struct IsdnCard *card)
{
int ret;
struct IsdnCardState *cs = card->cs;
char tmp[64];
#ifdef __BIG_ENDIAN
#error "not running on big endian machines now"
#endif
strcpy(tmp, enternow_pci_rev);
printk(KERN_INFO "HiSax: Formula-n Europe AG enter:now ISDN PCI driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ != ISDN_CTYPE_ENTERNOW)
return(0);
test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
for ( ;; )
{
if ((dev_netjet = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET,
PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) {
ret = en_pci_probe(dev_netjet, cs);
if (!ret)
return(0);
} else {
printk(KERN_WARNING "enter:now PCI: No PCI card found\n");
return(0);
}
en_cs_init(card, cs);
break;
}
return en_cs_init_rest(card, cs);
}
int __devinit
setup_netjet_s(struct IsdnCard *card)
{
int ret;
struct IsdnCardState *cs = card->cs;
char tmp[64];
#ifdef __BIG_ENDIAN
#error "not running on big endian machines now"
#endif
strcpy(tmp, NETjet_S_revision);
#ifdef CONFIG_DEBUG_PRINTK
printk(KERN_INFO "HiSax: Traverse Tech. NETjet-S driver Rev. %s\n", HiSax_getrev(tmp));
#else
;
#endif
if (cs->typ != ISDN_CTYPE_NETJET_S)
return(0);
test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
for ( ;; )
{
if ((dev_netjet = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET,
PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) {
ret = njs_pci_probe(dev_netjet, cs);
if (!ret)
return(0);
} else {
#ifdef CONFIG_DEBUG_PRINTK
printk(KERN_WARNING "NETjet-S: No PCI card found\n");
#else
;
#endif
return(0);
}
ret = njs_cs_init(card, cs);
if (!ret)
return(0);
if (ret > 0)
break;
/* otherwise, ret < 0, continue looping */
}
return njs_cs_init_rest(card, cs);
}
static int setup_diva_pci(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
cs->subtyp = 0;
if ((dev_diva = hisax_find_pci_device(PCI_VENDOR_ID_EICON,
PCI_DEVICE_ID_EICON_DIVA20, dev_diva))) {
if (pci_enable_device(dev_diva))
return (0);
cs->subtyp = DIVA_PCI;
cs->irq = dev_diva->irq;
cs->hw.diva.cfg_reg = pci_resource_start(dev_diva, 2);
} else if ((dev_diva_u = hisax_find_pci_device(PCI_VENDOR_ID_EICON,
PCI_DEVICE_ID_EICON_DIVA20_U, dev_diva_u))) {
if (pci_enable_device(dev_diva_u))
return (0);
cs->subtyp = DIVA_PCI;
cs->irq = dev_diva_u->irq;
cs->hw.diva.cfg_reg = pci_resource_start(dev_diva_u, 2);
} else if ((dev_diva201 = hisax_find_pci_device(PCI_VENDOR_ID_EICON,
PCI_DEVICE_ID_EICON_DIVA201, dev_diva201))) {
if (pci_enable_device(dev_diva201))
return (0);
cs->subtyp = DIVA_IPAC_PCI;
cs->irq = dev_diva201->irq;
cs->hw.diva.pci_cfg =
(ulong) ioremap(pci_resource_start(dev_diva201, 0), 4096);
cs->hw.diva.cfg_reg =
(ulong) ioremap(pci_resource_start(dev_diva201, 1), 4096);
} else if ((dev_diva202 = hisax_find_pci_device(PCI_VENDOR_ID_EICON,
PCI_DEVICE_ID_EICON_DIVA202, dev_diva202))) {
if (pci_enable_device(dev_diva202))
return (0);
cs->subtyp = DIVA_IPACX_PCI;
cs->irq = dev_diva202->irq;
cs->hw.diva.pci_cfg =
(ulong) ioremap(pci_resource_start(dev_diva202, 0), 4096);
cs->hw.diva.cfg_reg =
(ulong) ioremap(pci_resource_start(dev_diva202, 1), 4096);
} else {
return (-1); /* card not found; continue search */
}
if (!cs->irq) {
printk(KERN_WARNING "Diva: No IRQ for PCI card found\n");
iounmap_diva(cs);
return (0);
}
if (!cs->hw.diva.cfg_reg) {
printk(KERN_WARNING "Diva: No IO-Adr for PCI card found\n");
iounmap_diva(cs);
return (0);
}
cs->irq_flags |= IRQF_SHARED;
if ((cs->subtyp == DIVA_IPAC_PCI) ||
(cs->subtyp == DIVA_IPACX_PCI)) {
cs->hw.diva.ctrl = 0;
cs->hw.diva.isac = 0;
cs->hw.diva.hscx = 0;
cs->hw.diva.isac_adr = 0;
cs->hw.diva.hscx_adr = 0;
test_and_set_bit(HW_IPAC, &cs->HW_Flags);
} else {
cs->hw.diva.ctrl = cs->hw.diva.cfg_reg + DIVA_PCI_CTRL;
cs->hw.diva.isac = cs->hw.diva.cfg_reg + DIVA_PCI_ISAC_DATA;
cs->hw.diva.hscx = cs->hw.diva.cfg_reg + DIVA_HSCX_DATA;
cs->hw.diva.isac_adr = cs->hw.diva.cfg_reg + DIVA_PCI_ISAC_ADR;
cs->hw.diva.hscx_adr = cs->hw.diva.cfg_reg + DIVA_HSCX_ADR;
}
return (1); /* card found */
}
int __devinit
setup_telespci(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
char tmp[64];
#ifdef __BIG_ENDIAN
#error "not running on big endian machines now"
#endif
strcpy(tmp, telespci_revision);
;
if (cs->typ != ISDN_CTYPE_TELESPCI)
return (0);
if ((dev_tel = hisax_find_pci_device (PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36120, dev_tel))) {
if (pci_enable_device(dev_tel))
return(0);
cs->irq = dev_tel->irq;
if (!cs->irq) {
;
return(0);
}
cs->hw.teles0.membase = ioremap(pci_resource_start(dev_tel, 0),
PAGE_SIZE);
// printk(KERN_INFO "Found: Zoran, base-address: 0x%llx, irq: 0x%x\n",
// (unsigned long long)pci_resource_start(dev_tel, 0),
;
} else {
;
return(0);
}
/* Initialize Zoran PCI controller */
writel(0x00000000, cs->hw.teles0.membase + 0x28);
writel(0x01000000, cs->hw.teles0.membase + 0x28);
writel(0x01000000, cs->hw.teles0.membase + 0x28);
writel(0x7BFFFFFF, cs->hw.teles0.membase + 0x2C);
writel(0x70000000, cs->hw.teles0.membase + 0x3C);
writel(0x61000000, cs->hw.teles0.membase + 0x40);
/* writel(0x00800000, cs->hw.teles0.membase + 0x200); */
// printk(KERN_INFO
// "HiSax: Teles PCI config irq:%d mem:%p\n",
// cs->irq,
;
setup_isac(cs);
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->BC_Read_Reg = &ReadHSCX;
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &TelesPCI_card_msg;
cs->irq_func = &telespci_interrupt;
cs->irq_flags |= IRQF_SHARED;
ISACVersion(cs, "TelesPCI:");
if (HscxVersion(cs, "TelesPCI:")) {
// printk(KERN_WARNING
;
release_io_telespci(cs);
return (0);
}
return (1);
}
static int __devinit
setup_gazelpci(struct IsdnCardState *cs)
{
u_int pci_ioaddr0 = 0, pci_ioaddr1 = 0;
u_char pci_irq = 0, found;
u_int nbseek, seekcard;
#ifdef CONFIG_DEBUG_PRINTK
printk(KERN_WARNING "Gazel: PCI card automatic recognition\n");
#else
;
#endif
found = 0;
seekcard = PCI_DEVICE_ID_PLX_R685;
for (nbseek = 0; nbseek < 4; nbseek++) {
if ((dev_tel = hisax_find_pci_device(PCI_VENDOR_ID_PLX,
seekcard, dev_tel))) {
if (pci_enable_device(dev_tel))
return 1;
pci_irq = dev_tel->irq;
pci_ioaddr0 = pci_resource_start(dev_tel, 1);
pci_ioaddr1 = pci_resource_start(dev_tel, 2);
found = 1;
}
if (found)
break;
else {
switch (seekcard) {
case PCI_DEVICE_ID_PLX_R685:
seekcard = PCI_DEVICE_ID_PLX_R753;
break;
case PCI_DEVICE_ID_PLX_R753:
seekcard = PCI_DEVICE_ID_PLX_DJINN_ITOO;
break;
case PCI_DEVICE_ID_PLX_DJINN_ITOO:
seekcard = PCI_DEVICE_ID_PLX_OLITEC;
break;
}
}
}
if (!found) {
#ifdef CONFIG_DEBUG_PRINTK
printk(KERN_WARNING "Gazel: No PCI card found\n");
#else
;
#endif
return (1);
}
if (!pci_irq) {
#ifdef CONFIG_DEBUG_PRINTK
printk(KERN_WARNING "Gazel: No IRQ for PCI card found\n");
#else
;
#endif
return 1;
}
cs->hw.gazel.pciaddr[0] = pci_ioaddr0;
cs->hw.gazel.pciaddr[1] = pci_ioaddr1;
setup_isac(cs);
pci_ioaddr1 &= 0xfffe;
cs->hw.gazel.cfg_reg = pci_ioaddr0 & 0xfffe;
cs->hw.gazel.ipac = pci_ioaddr1;
cs->hw.gazel.isac = pci_ioaddr1 + 0x80;
cs->hw.gazel.hscx[0] = pci_ioaddr1;
cs->hw.gazel.hscx[1] = pci_ioaddr1 + 0x40;
cs->hw.gazel.isacfifo = cs->hw.gazel.isac;
cs->hw.gazel.hscxfifo[0] = cs->hw.gazel.hscx[0];
cs->hw.gazel.hscxfifo[1] = cs->hw.gazel.hscx[1];
cs->irq = pci_irq;
cs->irq_flags |= IRQF_SHARED;
switch (seekcard) {
case PCI_DEVICE_ID_PLX_R685:
#ifdef CONFIG_DEBUG_PRINTK
printk(KERN_INFO "Gazel: Card PCI R685 found\n");
#else
;
#endif
cs->subtyp = R685;
cs->dc.isac.adf2 = 0x87;
#ifdef CONFIG_DEBUG_PRINTK
printk(KERN_INFO
"Gazel: config irq:%d isac:0x%X cfg:0x%X\n",
cs->irq, cs->hw.gazel.isac, cs->hw.gazel.cfg_reg);
#else
;
#endif
#ifdef CONFIG_DEBUG_PRINTK
printk(KERN_INFO
"Gazel: hscx A:0x%X hscx B:0x%X\n",
cs->hw.gazel.hscx[0], cs->hw.gazel.hscx[1]);
#else
;
#endif
break;
case PCI_DEVICE_ID_PLX_R753:
case PCI_DEVICE_ID_PLX_DJINN_ITOO:
case PCI_DEVICE_ID_PLX_OLITEC:
#ifdef CONFIG_DEBUG_PRINTK
printk(KERN_INFO "Gazel: Card PCI R753 found\n");
#else
;
#endif
cs->subtyp = R753;
test_and_set_bit(HW_IPAC, &cs->HW_Flags);
#ifdef CONFIG_DEBUG_PRINTK
printk(KERN_INFO
"Gazel: config irq:%d ipac:0x%X cfg:0x%X\n",
cs->irq, cs->hw.gazel.ipac, cs->hw.gazel.cfg_reg);
#else
;
#endif
break;
}
return (0);
}
static int __devinit
setup_sedlbauer_pci(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
u16 sub_vendor_id, sub_id;
if ((dev_sedl = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET,
PCI_DEVICE_ID_TIGERJET_100, dev_sedl))) {
if (pci_enable_device(dev_sedl))
return (0);
cs->irq = dev_sedl->irq;
if (!cs->irq) {
printk(KERN_WARNING "Sedlbauer: No IRQ for PCI card found\n");
return (0);
}
cs->hw.sedl.cfg_reg = pci_resource_start(dev_sedl, 0);
} else {
printk(KERN_WARNING "Sedlbauer: No PCI card found\n");
return (0);
}
cs->irq_flags |= IRQF_SHARED;
cs->hw.sedl.bus = SEDL_BUS_PCI;
sub_vendor_id = dev_sedl->subsystem_vendor;
sub_id = dev_sedl->subsystem_device;
printk(KERN_INFO "Sedlbauer: PCI subvendor:%x subid %x\n",
sub_vendor_id, sub_id);
printk(KERN_INFO "Sedlbauer: PCI base adr %#x\n",
cs->hw.sedl.cfg_reg);
if (sub_id != PCI_SUB_ID_SEDLBAUER) {
printk(KERN_ERR "Sedlbauer: unknown sub id %#x\n", sub_id);
return (0);
}
if (sub_vendor_id == PCI_SUBVENDOR_SPEEDFAX_PYRAMID) {
cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
cs->subtyp = SEDL_SPEEDFAX_PYRAMID;
} else if (sub_vendor_id == PCI_SUBVENDOR_SPEEDFAX_PCI) {
cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
cs->subtyp = SEDL_SPEEDFAX_PCI;
} else if (sub_vendor_id == PCI_SUBVENDOR_HST_SAPHIR3) {
cs->hw.sedl.chip = SEDL_CHIP_IPAC;
cs->subtyp = HST_SAPHIR3;
} else if (sub_vendor_id == PCI_SUBVENDOR_SEDLBAUER_PCI) {
cs->hw.sedl.chip = SEDL_CHIP_IPAC;
cs->subtyp = SEDL_SPEED_PCI;
} else {
printk(KERN_ERR "Sedlbauer: unknown sub vendor id %#x\n",
sub_vendor_id);
return (0);
}
cs->hw.sedl.reset_on = SEDL_ISAR_PCI_ISAR_RESET_ON;
cs->hw.sedl.reset_off = SEDL_ISAR_PCI_ISAR_RESET_OFF;
byteout(cs->hw.sedl.cfg_reg, 0xff);
byteout(cs->hw.sedl.cfg_reg, 0x00);
byteout(cs->hw.sedl.cfg_reg + 2, 0xdd);
byteout(cs->hw.sedl.cfg_reg + 5, 0); /* */
byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_on);
mdelay(2);
byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_off);
mdelay(10);
return (1);
}
int __devinit
setup_w6692(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
char tmp[64];
u_char found = 0;
u_char pci_irq = 0;
u_int pci_ioaddr = 0;
strcpy(tmp, w6692_revision);
printk(KERN_INFO "HiSax: W6692 driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ != ISDN_CTYPE_W6692)
return (0);
while (id_list[id_idx].vendor_id) {
dev_w6692 = hisax_find_pci_device(id_list[id_idx].vendor_id,
id_list[id_idx].device_id,
dev_w6692);
if (dev_w6692) {
if (pci_enable_device(dev_w6692))
continue;
cs->subtyp = id_idx;
break;
}
id_idx++;
}
if (dev_w6692) {
found = 1;
pci_irq = dev_w6692->irq;
/* I think address 0 is allways the configuration area */
/* and address 1 is the real IO space KKe 03.09.99 */
pci_ioaddr = pci_resource_start(dev_w6692, 1);
/* USR ISDN PCI card TA need some special handling */
if (cs->subtyp == W6692_WINBOND) {
if ((W6692_SV_USR == dev_w6692->subsystem_vendor) &&
(W6692_SD_USR == dev_w6692->subsystem_device)) {
cs->subtyp = W6692_USR;
}
}
}
if (!found) {
printk(KERN_WARNING "W6692: No PCI card found\n");
return (0);
}
cs->irq = pci_irq;
if (!cs->irq) {
printk(KERN_WARNING "W6692: No IRQ for PCI card found\n");
return (0);
}
if (!pci_ioaddr) {
printk(KERN_WARNING "W6692: NO I/O Base Address found\n");
return (0);
}
cs->hw.w6692.iobase = pci_ioaddr;
printk(KERN_INFO "Found: %s %s, I/O base: 0x%x, irq: %d\n",
id_list[cs->subtyp].vendor_name, id_list[cs->subtyp].card_name,
pci_ioaddr, pci_irq);
if (!request_region(cs->hw.w6692.iobase, 256, id_list[cs->subtyp].card_name)) {
printk(KERN_WARNING
"HiSax: %s I/O ports %x-%x already in use\n",
id_list[cs->subtyp].card_name,
cs->hw.w6692.iobase,
cs->hw.w6692.iobase + 255);
return (0);
}
printk(KERN_INFO
"HiSax: %s config irq:%d I/O:%x\n",
id_list[cs->subtyp].card_name, cs->irq,
cs->hw.w6692.iobase);
INIT_WORK(&cs->tqueue, W6692_bh);
cs->readW6692 = &ReadW6692;
cs->writeW6692 = &WriteW6692;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->BC_Read_Reg = &ReadW6692B;
cs->BC_Write_Reg = &WriteW6692B;
cs->BC_Send_Data = &W6692B_fill_fifo;
cs->cardmsg = &w6692_card_msg;
cs->irq_func = &W6692_interrupt;
cs->irq_flags |= IRQF_SHARED;
W6692Version(cs, "W6692:");
printk(KERN_INFO "W6692 ISTA=0x%X\n", ReadW6692(cs, W_ISTA));
printk(KERN_INFO "W6692 IMASK=0x%X\n", ReadW6692(cs, W_IMASK));
printk(KERN_INFO "W6692 D_EXIR=0x%X\n", ReadW6692(cs, W_D_EXIR));
printk(KERN_INFO "W6692 D_EXIM=0x%X\n", ReadW6692(cs, W_D_EXIM));
printk(KERN_INFO "W6692 D_RSTA=0x%X\n", ReadW6692(cs, W_D_RSTA));
return (1);
}
int __devinit
setup_sct_quadro(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
char tmp[64];
u_int found = 0;
u_int pci_ioaddr1, pci_ioaddr2, pci_ioaddr3, pci_ioaddr4, pci_ioaddr5;
strcpy(tmp, sct_quadro_revision);
printk(KERN_INFO "HiSax: T-Berkom driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ == ISDN_CTYPE_SCT_QUADRO) {
cs->subtyp = SCT_1; /* Preset */
} else
return (0);
/* Identify subtype by para[0] */
if (card->para[0] >= SCT_1 && card->para[0] <= SCT_4)
cs->subtyp = card->para[0];
else {
printk(KERN_WARNING "HiSax: Scitel Quadro: Invalid "
"subcontroller in configuration, default to 1\n");
return (0);
}
if ((cs->subtyp != SCT_1) && ((sub_sys_id != PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) ||
(sub_vendor_id != PCI_VENDOR_ID_BERKOM)))
return (0);
if (cs->subtyp == SCT_1) {
while ((dev_a8 = hisax_find_pci_device(PCI_VENDOR_ID_PLX,
PCI_DEVICE_ID_PLX_9050, dev_a8))) {
sub_vendor_id = dev_a8->subsystem_vendor;
sub_sys_id = dev_a8->subsystem_device;
if ((sub_sys_id == PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) &&
(sub_vendor_id == PCI_VENDOR_ID_BERKOM)) {
if (pci_enable_device(dev_a8))
return(0);
pci_ioaddr1 = pci_resource_start(dev_a8, 1);
pci_irq = dev_a8->irq;
pci_bus = dev_a8->bus->number;
pci_device_fn = dev_a8->devfn;
found = 1;
break;
}
}
if (!found) {
printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
"Card not found\n",
sct_quadro_subtypes[cs->subtyp]);
return (0);
}
#ifdef ATTEMPT_PCI_REMAPPING
/* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */
if ((pci_ioaddr1 & 0x80) && (dev_a8->revision == 1)) {
printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
"PLX rev 1, remapping required!\n",
sct_quadro_subtypes[cs->subtyp]);
/* Restart PCI negotiation */
pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int) - 1);
/* Move up by 0x80 byte */
pci_ioaddr1 += 0x80;
pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, pci_ioaddr1);
dev_a8->resource[ 1].start = pci_ioaddr1;
}
#endif /* End HACK */
}
if (!pci_irq) { /* IRQ range check ?? */
printk(KERN_WARNING "HiSax: Scitel Quadro (%s): No IRQ\n",
sct_quadro_subtypes[cs->subtyp]);
return (0);
}
pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_1, &pci_ioaddr1);
pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_2, &pci_ioaddr2);
pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_3, &pci_ioaddr3);
pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_4, &pci_ioaddr4);
pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_5, &pci_ioaddr5);
if (!pci_ioaddr1 || !pci_ioaddr2 || !pci_ioaddr3 || !pci_ioaddr4 || !pci_ioaddr5) {
printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
"No IO base address(es)\n",
sct_quadro_subtypes[cs->subtyp]);
return (0);
}
pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
pci_ioaddr2 &= PCI_BASE_ADDRESS_IO_MASK;
pci_ioaddr3 &= PCI_BASE_ADDRESS_IO_MASK;
pci_ioaddr4 &= PCI_BASE_ADDRESS_IO_MASK;
pci_ioaddr5 &= PCI_BASE_ADDRESS_IO_MASK;
/* Take over */
cs->irq = pci_irq;
cs->irq_flags |= IRQF_SHARED;
/* pci_ioaddr1 is unique to all subdevices */
/* pci_ioaddr2 is for the fourth subdevice only */
/* pci_ioaddr3 is for the third subdevice only */
/* pci_ioaddr4 is for the second subdevice only */
/* pci_ioaddr5 is for the first subdevice only */
cs->hw.ax.plx_adr = pci_ioaddr1;
/* Enter all ipac_base addresses */
switch(cs->subtyp) {
case 1:
cs->hw.ax.base = pci_ioaddr5 + 0x00;
if (sct_alloc_io(pci_ioaddr1, 128))
return(0);
if (sct_alloc_io(pci_ioaddr5, 64))
return(0);
/* disable all IPAC */
writereg(pci_ioaddr5, pci_ioaddr5 + 4,
IPAC_MASK, 0xFF);
writereg(pci_ioaddr4 + 0x08, pci_ioaddr4 + 0x0c,
IPAC_MASK, 0xFF);
writereg(pci_ioaddr3 + 0x10, pci_ioaddr3 + 0x14,
IPAC_MASK, 0xFF);
writereg(pci_ioaddr2 + 0x20, pci_ioaddr2 + 0x24,
IPAC_MASK, 0xFF);
break;
case 2:
cs->hw.ax.base = pci_ioaddr4 + 0x08;
if (sct_alloc_io(pci_ioaddr4, 64))
return(0);
break;
case 3:
cs->hw.ax.base = pci_ioaddr3 + 0x10;
if (sct_alloc_io(pci_ioaddr3, 64))
return(0);
break;
case 4:
cs->hw.ax.base = pci_ioaddr2 + 0x20;
if (sct_alloc_io(pci_ioaddr2, 64))
return(0);
break;
}
/* For isac and hscx data path */
cs->hw.ax.data_adr = cs->hw.ax.base + 4;
printk(KERN_INFO "HiSax: Scitel Quadro (%s) configured at "
"0x%.4lX, 0x%.4lX, 0x%.4lX and IRQ %d\n",
sct_quadro_subtypes[cs->subtyp],
cs->hw.ax.plx_adr,
cs->hw.ax.base,
cs->hw.ax.data_adr,
cs->irq);
test_and_set_bit(HW_IPAC, &cs->HW_Flags);
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->BC_Read_Reg = &ReadHSCX;
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &BKM_card_msg;
cs->irq_func = &bkm_interrupt_ipac;
printk(KERN_INFO "HiSax: Scitel Quadro (%s): IPAC Version %d\n",
sct_quadro_subtypes[cs->subtyp],
readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID));
return (1);
}
int __devinit setup_niccy(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
char tmp[64];
strcpy(tmp, niccy_revision);
printk(KERN_INFO "HiSax: Niccy driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ != ISDN_CTYPE_NICCY)
return 0;
#ifdef __ISAPNP__
if (!card->para[1] && isapnp_present()) {
struct pnp_dev *pnp_d = NULL;
int err;
pnp_c = pnp_find_card(ISAPNP_VENDOR('S', 'D', 'A'),
ISAPNP_FUNCTION(0x0150), pnp_c);
if (pnp_c) {
pnp_d = pnp_find_dev(pnp_c,
ISAPNP_VENDOR('S', 'D', 'A'),
ISAPNP_FUNCTION(0x0150), pnp_d);
if (!pnp_d) {
printk(KERN_ERR "NiccyPnP: PnP error card "
"found, no device\n");
return 0;
}
pnp_disable_dev(pnp_d);
err = pnp_activate_dev(pnp_d);
if (err < 0) {
printk(KERN_WARNING "%s: pnp_activate_dev "
"ret(%d)\n", __func__, err);
return 0;
}
card->para[1] = pnp_port_start(pnp_d, 0);
card->para[2] = pnp_port_start(pnp_d, 1);
card->para[0] = pnp_irq(pnp_d, 0);
if (!card->para[0] || !card->para[1] ||
!card->para[2]) {
printk(KERN_ERR "NiccyPnP:some resources are "
"missing %ld/%lx/%lx\n",
card->para[0], card->para[1],
card->para[2]);
pnp_disable_dev(pnp_d);
return 0;
}
} else
printk(KERN_INFO "NiccyPnP: no ISAPnP card found\n");
}
#endif
if (card->para[1]) {
cs->hw.niccy.isac = card->para[1] + ISAC_PNP;
cs->hw.niccy.hscx = card->para[1] + HSCX_PNP;
cs->hw.niccy.isac_ale = card->para[2] + ISAC_PNP;
cs->hw.niccy.hscx_ale = card->para[2] + HSCX_PNP;
cs->hw.niccy.cfg_reg = 0;
cs->subtyp = NICCY_PNP;
cs->irq = card->para[0];
if (!request_region(cs->hw.niccy.isac, 2, "niccy data")) {
printk(KERN_WARNING "HiSax: NICCY data port %x-%x "
"already in use\n",
cs->hw.niccy.isac, cs->hw.niccy.isac + 1);
return 0;
}
if (!request_region(cs->hw.niccy.isac_ale, 2, "niccy addr")) {
printk(KERN_WARNING "HiSax: NICCY address port %x-%x "
"already in use\n",
cs->hw.niccy.isac_ale,
cs->hw.niccy.isac_ale + 1);
release_region(cs->hw.niccy.isac, 2);
return 0;
}
} else {
#ifdef CONFIG_PCI
static struct pci_dev *niccy_dev __devinitdata;
u_int pci_ioaddr;
cs->subtyp = 0;
if ((niccy_dev = hisax_find_pci_device(PCI_VENDOR_ID_SATSAGEM,
PCI_DEVICE_ID_SATSAGEM_NICCY,
niccy_dev))) {
if (pci_enable_device(niccy_dev))
return 0;
/* get IRQ */
if (!niccy_dev->irq) {
printk(KERN_WARNING
"Niccy: No IRQ for PCI card found\n");
return 0;
}
cs->irq = niccy_dev->irq;
cs->hw.niccy.cfg_reg = pci_resource_start(niccy_dev, 0);
if (!cs->hw.niccy.cfg_reg) {
printk(KERN_WARNING
"Niccy: No IO-Adr for PCI cfg found\n");
return 0;
}
pci_ioaddr = pci_resource_start(niccy_dev, 1);
if (!pci_ioaddr) {
printk(KERN_WARNING
"Niccy: No IO-Adr for PCI card found\n");
return 0;
}
cs->subtyp = NICCY_PCI;
} else {
printk(KERN_WARNING "Niccy: No PCI card found\n");
return 0;
}
cs->irq_flags |= IRQF_SHARED;
cs->hw.niccy.isac = pci_ioaddr + ISAC_PCI_DATA;
cs->hw.niccy.isac_ale = pci_ioaddr + ISAC_PCI_ADDR;
cs->hw.niccy.hscx = pci_ioaddr + HSCX_PCI_DATA;
cs->hw.niccy.hscx_ale = pci_ioaddr + HSCX_PCI_ADDR;
if (!request_region(cs->hw.niccy.isac, 4, "niccy")) {
printk(KERN_WARNING
"HiSax: NICCY data port %x-%x already in use\n",
cs->hw.niccy.isac, cs->hw.niccy.isac + 4);
return 0;
}
if (!request_region(cs->hw.niccy.cfg_reg, 0x40, "niccy pci")) {
printk(KERN_WARNING
"HiSax: NICCY pci port %x-%x already in use\n",
cs->hw.niccy.cfg_reg,
cs->hw.niccy.cfg_reg + 0x40);
release_region(cs->hw.niccy.isac, 4);
return 0;
}
#else
printk(KERN_WARNING "Niccy: io0 0 and NO_PCI_BIOS\n");
printk(KERN_WARNING "Niccy: unable to config NICCY PCI\n");
return 0;
#endif /* CONFIG_PCI */
}
printk(KERN_INFO "HiSax: NICCY %s config irq:%d data:0x%X ale:0x%X\n",
(cs->subtyp == 1) ? "PnP" : "PCI",
cs->irq, cs->hw.niccy.isac, cs->hw.niccy.isac_ale);
setup_isac(cs);
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->BC_Read_Reg = &ReadHSCX;
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &niccy_card_msg;
cs->irq_func = &niccy_interrupt;
ISACVersion(cs, "Niccy:");
if (HscxVersion(cs, "Niccy:")) {
printk(KERN_WARNING "Niccy: wrong HSCX versions check IO "
"address\n");
release_io_niccy(cs);
return 0;
}
return 1;
}
