int main(void)
{
uint32_t err_code;
bool erase_bonds;
// Initialize.
APP_TIMER_INIT(APP_TIMER_PRESCALER, APP_TIMER_MAX_TIMERS, APP_TIMER_OP_QUEUE_SIZE, NULL);
buttons_leds_init(&erase_bonds);
uart_init();
printf("Relay Example\r\n");
ble_stack_init();
device_manager_init(erase_bonds);
db_discovery_init();
hrs_c_init();
rscs_c_init();
gap_params_init();
services_init();
advertising_init();
conn_params_init();
// Start scanning for peripherals and initiate connection
// with devices that advertise Heart Rate UUID.
scan_start();
// Start advertising.
err_code = ble_advertising_start(BLE_ADV_MODE_FAST);
APP_ERROR_CHECK(err_code);
for (;; )
{
power_manage();
}
}
int main(void)
{
ret_code_t err_code;
bool erase_bonds;
err_code = NRF_LOG_INIT();
APP_ERROR_CHECK(err_code);
NRF_LOG_PRINTF("Relay Example\r\n");
APP_TIMER_INIT(APP_TIMER_PRESCALER, APP_TIMER_OP_QUEUE_SIZE, NULL);
buttons_leds_init(&erase_bonds);
if (erase_bonds == true)
{
NRF_LOG("Bonds erased!\r\n");
}
ble_stack_init();
peer_manager_init(erase_bonds);
db_discovery_init();
hrs_c_init();
rscs_c_init();
gap_params_init();
conn_params_init();
services_init();
advertising_init();
/** Start scanning for peripherals and initiate connection to devices which
* advertise Heart Rate or Running speed and cadence UUIDs. */
scan_start();
// Turn on the LED to signal scanning.
LEDS_ON(CENTRAL_SCANNING_LED);
// Start advertising.
err_code = ble_advertising_start(BLE_ADV_MODE_FAST);
APP_ERROR_CHECK(err_code);
for (;;)
{
// Wait for BLE events.
power_manage();
}
}
int main(void)
{
// Initialization of various modules.
uint32_t err_code;
const app_uart_comm_params_t comm_params =
{
RX_PIN_NUMBER,
TX_PIN_NUMBER,
RTS_PIN_NUMBER,
CTS_PIN_NUMBER,
APP_UART_FLOW_CONTROL_ENABLED,
false,
UART_BAUDRATE_BAUDRATE_Baud38400
};
APP_UART_FIFO_INIT(&comm_params,
UART_RX_BUF_SIZE,
UART_TX_BUF_SIZE,
uart_error_handle,
APP_IRQ_PRIORITY_LOW,
err_code);
APP_ERROR_CHECK(err_code);
app_trace_init();
APP_TIMER_INIT(APP_TIMER_PRESCALER, APP_TIMER_MAX_TIMERS, APP_TIMER_OP_QUEUE_SIZE, NULL);
APP_GPIOTE_INIT(1);
err_code = bsp_init(BSP_INIT_LED | BSP_INIT_BUTTONS, APP_TIMER_TICKS(100, APP_TIMER_PRESCALER),NULL);
APP_ERROR_CHECK(err_code);
printf("Heart rate collector example\r\n");
ble_stack_init();
device_manager_init();
db_discovery_init();
hrs_c_init();
bas_c_init();
// Start scanning for peripherals and initiate connection
// with devices that advertise Heart Rate UUID.
scan_start();
for (;; )
{
power_manage();
}
}
void ble_central_mode_init(void) {
// app_trace_init();
// APP_TIMER_INIT(APP_TIMER_PRESCALER, APP_TIMER_MAX_TIMERS, APP_TIMER_OP_QUEUE_SIZE, NULL);
// APP_GPIOTE_INIT(1);
// err_code = bsp_init(BSP_INIT_LED | BSP_INIT_BUTTONS, APP_TIMER_TICKS(100, APP_TIMER_PRESCALER),NULL);
// APP_ERROR_CHECK(err_code);
// printf("Heart rate collector example\r\n");
ble_stack_init();
device_manager_init();
db_discovery_init();
hrs_c_init();
bas_c_init();
// Start scanning for peripherals and initiate connection
// with devices that advertise Heart Rate UUID.
scan_start();
}
int main(void)
{
ret_code_t err_code;
bool erase_bonds;
err_code = NRF_LOG_INIT();
APP_ERROR_CHECK(err_code);
NRF_LOG_PRINTF("Relay Example\r\n");
APP_TIMER_INIT(APP_TIMER_PRESCALER, APP_TIMER_OP_QUEUE_SIZE, NULL);
buttons_leds_init(&erase_bonds);
if (erase_bonds)
{
NRF_LOG_PRINTF("Bonds erased!\r\n");
}
ble_stack_init();
peer_manager_init(erase_bonds);
db_discovery_init();
hrs_c_init();
rscs_c_init();
gap_params_init();
conn_params_init();
services_init();
advertising_init();
adv_scan_start();
for (;;)
{
// Wait for BLE events.
power_manage();
}
}
int main(void)
{
bool erase_bonds;
// Initialize.
APP_TIMER_INIT(APP_TIMER_PRESCALER, APP_TIMER_MAX_TIMERS, APP_TIMER_OP_QUEUE_SIZE, NULL);
buttons_leds_init(&erase_bonds);
uart_init();
printf("Heart rate collector example\r\n");
ble_stack_init();
device_manager_init(erase_bonds);
db_discovery_init();
hrs_c_init();
bas_c_init();
// Start scanning for peripherals and initiate connection
// with devices that advertise Heart Rate UUID.
scan_start();
for (;; )
{
power_manage();
}
}
