int __init chr_dev_init(void)
{
if (devfs_register_chrdev(MEM_MAJOR,"mem",&memory_fops))
printk("unable to get major %d for memory devs\n", MEM_MAJOR);
memory_devfs_register();
rand_initialize();
#ifdef CONFIG_I2C
i2c_init_all();
#endif
#if defined (CONFIG_FB)
fbmem_init();
#endif
#if defined (CONFIG_PROM_CONSOLE)
prom_con_init();
#endif
#if defined (CONFIG_MDA_CONSOLE)
mda_console_init();
#endif
tty_init();
#ifdef CONFIG_M68K_PRINTER
lp_m68k_init();
#endif
misc_init();
#if CONFIG_QIC02_TAPE
qic02_tape_init();
#endif
#ifdef CONFIG_FTAPE
ftape_init();
#endif
#if defined(CONFIG_S390_TAPE) && defined(CONFIG_S390_TAPE_CHAR)
tapechar_init();
#endif
return 0;
}
void board_init_f(ulong dummy)
{
/* Set global data pointer */
gd = &gdata;
/* Clear global data */
memset((void *)gd, 0, sizeof(gd_t));
#ifdef CONFIG_LS2085A
arch_cpu_init();
#endif
#ifdef CONFIG_FSL_IFC
init_early_memctl_regs();
#endif
board_early_init_f();
timer_init();
#ifdef CONFIG_LS2085A
env_init();
#endif
get_clocks();
preloader_console_init();
#ifdef CONFIG_SPL_I2C_SUPPORT
i2c_init_all();
#endif
dram_init();
/* Clear the BSS */
memset(__bss_start, 0, __bss_end - __bss_start);
#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
enable_layerscape_ns_access();
#endif
board_init_r(NULL, 0);
}
void board_init_r(gd_t *gd, ulong dest_addr)
{
/* Pointer is writable since we allocated a register for it */
gd = (gd_t *)CONFIG_SPL_GD_ADDR;
bd_t *bd;
memset(gd, 0, sizeof(gd_t));
bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t));
memset(bd, 0, sizeof(bd_t));
gd->bd = bd;
bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR;
bd->bi_memsize = CONFIG_SYS_L2_SIZE;
probecpu();
get_clocks();
mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
CONFIG_SPL_RELOC_MALLOC_SIZE);
#ifndef CONFIG_SPL_NAND_BOOT
env_init();
#endif
#ifdef CONFIG_SPL_MMC_BOOT
mmc_initialize(bd);
#endif
/* relocate environment function pointers etc. */
#ifdef CONFIG_SPL_NAND_BOOT
nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
gd->env_addr = (ulong)(CONFIG_ENV_ADDR);
gd->env_valid = 1;
#else
env_relocate();
#endif
#ifdef CONFIG_SYS_I2C
i2c_init_all();
#else
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
gd->ram_size = initdram(0);
#ifdef CONFIG_SPL_NAND_BOOT
puts("Tertiary program loader running in sram...");
#else
puts("Second program loader running in sram...\n");
#endif
#ifdef CONFIG_SPL_MMC_BOOT
mmc_boot();
#elif defined(CONFIG_SPL_SPI_BOOT)
spi_boot();
#elif defined(CONFIG_SPL_NAND_BOOT)
nand_boot();
#endif
}
static int init_func_i2c(void)
{
puts("I2C: ");
#ifdef CONFIG_SYS_I2C
i2c_init_all();
#else
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
puts("ready\n");
return (0);
}
void board_init_f(ulong dummy)
{
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
unsigned int major;
#ifdef CONFIG_NAND_BOOT
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
u32 porsr1, pinctl;
/*
* There is LS1 SoC issue where NOR, FPGA are inaccessible during
* NAND boot because IFC signals > IFC_AD7 are not enabled.
* This workaround changes RCW source to make all signals enabled.
*/
porsr1 = in_be32(&gur->porsr1);
pinctl = ((porsr1 & ~(DCFG_CCSR_PORSR1_RCW_MASK)) |
DCFG_CCSR_PORSR1_RCW_SRC_I2C);
out_be32((unsigned int *)(CONFIG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_PORCR1),
pinctl);
#endif
/* Clear the BSS */
memset(__bss_start, 0, __bss_end - __bss_start);
#ifdef CONFIG_FSL_IFC
init_early_memctl_regs();
#endif
get_clocks();
#if defined(CONFIG_DEEP_SLEEP)
if (is_warm_boot())
fsl_dp_disable_console();
#endif
preloader_console_init();
#ifdef CONFIG_SPL_I2C_SUPPORT
i2c_init_all();
#endif
major = get_soc_major_rev();
if (major == SOC_MAJOR_VER_1_0)
out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
dram_init();
/* Allow OCRAM access permission as R/W */
#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
enable_layerscape_ns_access();
#endif
board_init_r(NULL, 0);
}
void board_init_f(ulong dummy)
{
/* Clear global data */
memset((void *)gd, 0, sizeof(gd_t));
board_early_init_f();
timer_init();
#ifdef CONFIG_ARCH_LS2080A
env_init();
#endif
get_clocks();
preloader_console_init();
spl_set_bd();
#ifdef CONFIG_SPL_I2C_SUPPORT
i2c_init_all();
#endif
dram_init();
#ifdef CONFIG_SPL_FSL_LS_PPA
#ifndef CONFIG_SYS_MEM_RESERVE_SECURE
#error Need secure RAM for PPA
#endif
/*
* Secure memory location is determined in dram_init_banksize().
* gd->ram_size is deducted by the size of secure ram.
*/
dram_init_banksize();
/*
* After dram_init_bank_size(), we know U-Boot only uses the first
* memory bank regardless how big the memory is.
*/
gd->ram_top = gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size;
/*
* If PPA is loaded, U-Boot will resume running at EL2.
* Cache and MMU will be enabled. Need a place for TLB.
* U-Boot will be relocated to the end of available memory
* in first bank. At this point, we cannot know how much
* memory U-Boot uses. Put TLB table lower by SPL_TLB_SETBACK
* to avoid overlapping. As soon as the RAM version U-Boot sets
* up new MMU, this space is no longer needed.
*/
gd->ram_top -= SPL_TLB_SETBACK;
gd->arch.tlb_size = PGTABLE_SIZE;
gd->arch.tlb_addr = (gd->ram_top - gd->arch.tlb_size) & ~(0x10000 - 1);
gd->arch.tlb_allocated = gd->arch.tlb_addr;
#endif /* CONFIG_SPL_FSL_LS_PPA */
}
void board_init_r(gd_t *gd, ulong dest_addr)
{
/* Pointer is writable since we allocated a register for it */
gd = (gd_t *)CONFIG_SPL_GD_ADDR;
bd_t *bd;
memset(gd, 0, sizeof(gd_t));
bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t));
memset(bd, 0, sizeof(bd_t));
gd->bd = bd;
bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR;
bd->bi_memsize = CONFIG_SYS_L2_SIZE;
arch_cpu_init();
get_clocks();
mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
CONFIG_SPL_RELOC_MALLOC_SIZE);
gd->flags |= GD_FLG_FULL_MALLOC_INIT;
/* relocate environment function pointers etc. */
nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
gd->env_addr = (ulong)(CONFIG_ENV_ADDR);
gd->env_valid = ENV_VALID;
i2c_init_all();
dram_init();
#ifdef CONFIG_SPL_NAND_BOOT
puts("TPL\n");
#else
puts("SPL\n");
#endif
nand_boot();
}
