Ejemplo n.º 1
0
/**
 *  i40e_shutdown_arq - shutdown ARQ
 *  @hw: pointer to the hardware structure
 *
 *  The main shutdown routine for the Admin Receive Queue
 **/
enum i40e_status_code i40e_shutdown_arq(struct i40e_hw *hw)
{
	enum i40e_status_code ret_code = I40E_SUCCESS;

	i40e_acquire_spinlock(&hw->aq.arq_spinlock);

	if (hw->aq.arq.count == 0) {
		ret_code = I40E_ERR_NOT_READY;
		goto shutdown_arq_out;
	}

	/* Stop firmware AdminQ processing */
	wr32(hw, hw->aq.arq.head, 0);
	wr32(hw, hw->aq.arq.tail, 0);
	wr32(hw, hw->aq.arq.len, 0);
	wr32(hw, hw->aq.arq.bal, 0);
	wr32(hw, hw->aq.arq.bah, 0);

	hw->aq.arq.count = 0; /* to indicate uninitialized queue */

	/* free ring buffers */
	i40e_free_arq_bufs(hw);

shutdown_arq_out:
	i40e_release_spinlock(&hw->aq.arq_spinlock);
	return ret_code;
}
Ejemplo n.º 2
0
/**
 *  i40e_shutdown_arq - shutdown ARQ
 *  @hw: pointer to the hardware structure
 *
 *  The main shutdown routine for the Admin Receive Queue
 **/
enum i40e_status_code i40e_shutdown_arq(struct i40e_hw *hw)
{
	enum i40e_status_code ret_code = I40E_SUCCESS;

	if (hw->aq.arq.count == 0)
		return I40E_ERR_NOT_READY;

	/* Stop firmware AdminQ processing */
#ifdef I40E_QV
	/* Do not reset registers, as Tools AQ is shared resource for QV */
	if (!hw->aq_dbg_ena) {
		wr32(hw, hw->aq.arq.head, 0);
		wr32(hw, hw->aq.arq.tail, 0);
		wr32(hw, hw->aq.arq.len, 0);
		wr32(hw, hw->aq.arq.bal, 0);
		wr32(hw, hw->aq.arq.bah, 0);
	}
#else
	wr32(hw, hw->aq.arq.head, 0);
	wr32(hw, hw->aq.arq.tail, 0);
	wr32(hw, hw->aq.arq.len, 0);
	wr32(hw, hw->aq.arq.bal, 0);
	wr32(hw, hw->aq.arq.bah, 0);
#endif

	/* make sure spinlock is available */
	i40e_acquire_spinlock(&hw->aq.arq_spinlock);

	hw->aq.arq.count = 0; /* to indicate uninitialized queue */

	/* free ring buffers */
	i40e_free_arq_bufs(hw);

	i40e_release_spinlock(&hw->aq.arq_spinlock);

	return ret_code;
}
Ejemplo n.º 3
0
/**
 *  i40e_asq_send_command - send command to Admin Queue
 *  @hw: pointer to the hw struct
 *  @desc: prefilled descriptor describing the command (non DMA mem)
 *  @buff: buffer to use for indirect commands
 *  @buff_size: size of buffer for indirect commands
 *  @cmd_details: pointer to command details structure
 *
 *  This is the main send command driver routine for the Admin Queue send
 *  queue.  It runs the queue, cleans the queue, etc
 **/
enum i40e_status_code i40e_asq_send_command(struct i40e_hw *hw,
				struct i40e_aq_desc *desc,
				void *buff, /* can be NULL */
				u16  buff_size,
				struct i40e_asq_cmd_details *cmd_details)
{
	enum i40e_status_code status = I40E_SUCCESS;
	struct i40e_dma_mem *dma_buff = NULL;
	struct i40e_asq_cmd_details *details;
	struct i40e_aq_desc *desc_on_ring;
	bool cmd_completed = false;
	u16  retval = 0;
	u32  val = 0;

	i40e_acquire_spinlock(&hw->aq.asq_spinlock);

	hw->aq.asq_last_status = I40E_AQ_RC_OK;

	if (hw->aq.asq.count == 0) {
		i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
			   "AQTX: Admin queue not initialized.\n");
		status = I40E_ERR_QUEUE_EMPTY;
		goto asq_send_command_error;
	}

	val = rd32(hw, hw->aq.asq.head);
	if (val >= hw->aq.num_asq_entries) {
		i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
			   "AQTX: head overrun at %d\n", val);
		status = I40E_ERR_QUEUE_EMPTY;
		goto asq_send_command_error;
	}

	details = I40E_ADMINQ_DETAILS(hw->aq.asq, hw->aq.asq.next_to_use);
	if (cmd_details) {
		i40e_memcpy(details,
			    cmd_details,
			    sizeof(struct i40e_asq_cmd_details),
			    I40E_NONDMA_TO_NONDMA);

		/* If the cmd_details are defined copy the cookie.  The
		 * CPU_TO_LE32 is not needed here because the data is ignored
		 * by the FW, only used by the driver
		 */
		if (details->cookie) {
			desc->cookie_high =
				CPU_TO_LE32(I40E_HI_DWORD(details->cookie));
			desc->cookie_low =
				CPU_TO_LE32(I40E_LO_DWORD(details->cookie));
		}
	} else {
		i40e_memset(details, 0,
			    sizeof(struct i40e_asq_cmd_details),
			    I40E_NONDMA_MEM);
	}

	/* clear requested flags and then set additional flags if defined */
	desc->flags &= ~CPU_TO_LE16(details->flags_dis);
	desc->flags |= CPU_TO_LE16(details->flags_ena);

	if (buff_size > hw->aq.asq_buf_size) {
		i40e_debug(hw,
			   I40E_DEBUG_AQ_MESSAGE,
			   "AQTX: Invalid buffer size: %d.\n",
			   buff_size);
		status = I40E_ERR_INVALID_SIZE;
		goto asq_send_command_error;
	}

	if (details->postpone && !details->async) {
		i40e_debug(hw,
			   I40E_DEBUG_AQ_MESSAGE,
			   "AQTX: Async flag not set along with postpone flag");
		status = I40E_ERR_PARAM;
		goto asq_send_command_error;
	}

	/* call clean and check queue available function to reclaim the
	 * descriptors that were processed by FW, the function returns the
	 * number of desc available
	 */
	/* the clean function called here could be called in a separate thread
	 * in case of asynchronous completions
	 */
	if (i40e_clean_asq(hw) == 0) {
		i40e_debug(hw,
			   I40E_DEBUG_AQ_MESSAGE,
			   "AQTX: Error queue is full.\n");
		status = I40E_ERR_ADMIN_QUEUE_FULL;
		goto asq_send_command_error;
	}

	/* initialize the temp desc pointer with the right desc */
	desc_on_ring = I40E_ADMINQ_DESC(hw->aq.asq, hw->aq.asq.next_to_use);

	/* if the desc is available copy the temp desc to the right place */
	i40e_memcpy(desc_on_ring, desc, sizeof(struct i40e_aq_desc),
		    I40E_NONDMA_TO_DMA);

	/* if buff is not NULL assume indirect command */
	if (buff != NULL) {
		dma_buff = &(hw->aq.asq.r.asq_bi[hw->aq.asq.next_to_use]);
		/* copy the user buff into the respective DMA buff */
		i40e_memcpy(dma_buff->va, buff, buff_size,
			    I40E_NONDMA_TO_DMA);
		desc_on_ring->datalen = CPU_TO_LE16(buff_size);

		/* Update the address values in the desc with the pa value
		 * for respective buffer
		 */
		desc_on_ring->params.external.addr_high =
				CPU_TO_LE32(I40E_HI_DWORD(dma_buff->pa));
		desc_on_ring->params.external.addr_low =
				CPU_TO_LE32(I40E_LO_DWORD(dma_buff->pa));
	}

	/* bump the tail */
	i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, "AQTX: desc and buffer:\n");
	i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc_on_ring,
		      buff, buff_size);
	(hw->aq.asq.next_to_use)++;
	if (hw->aq.asq.next_to_use == hw->aq.asq.count)
		hw->aq.asq.next_to_use = 0;
	if (!details->postpone)
		wr32(hw, hw->aq.asq.tail, hw->aq.asq.next_to_use);

	/* if cmd_details are not defined or async flag is not set,
	 * we need to wait for desc write back
	 */
	if (!details->async && !details->postpone) {
		u32 total_delay = 0;

		do {
			/* AQ designers suggest use of head for better
			 * timing reliability than DD bit
			 */
			if (i40e_asq_done(hw))
				break;
			i40e_usec_delay(50);
			total_delay += 50;
		} while (total_delay < hw->aq.asq_cmd_timeout);
	}

	/* if ready, copy the desc back to temp */
	if (i40e_asq_done(hw)) {
		i40e_memcpy(desc, desc_on_ring, sizeof(struct i40e_aq_desc),
			    I40E_DMA_TO_NONDMA);
		if (buff != NULL)
			i40e_memcpy(buff, dma_buff->va, buff_size,
				    I40E_DMA_TO_NONDMA);
		retval = LE16_TO_CPU(desc->retval);
		if (retval != 0) {
			i40e_debug(hw,
				   I40E_DEBUG_AQ_MESSAGE,
				   "AQTX: Command completed with error 0x%X.\n",
				   retval);

			/* strip off FW internal code */
			retval &= 0xff;
		}
		cmd_completed = true;
		if ((enum i40e_admin_queue_err)retval == I40E_AQ_RC_OK)
			status = I40E_SUCCESS;
		else if ((enum i40e_admin_queue_err)retval == I40E_AQ_RC_EBUSY)
			status = I40E_ERR_NOT_READY;
		else
			status = I40E_ERR_ADMIN_QUEUE_ERROR;
		hw->aq.asq_last_status = (enum i40e_admin_queue_err)retval;
	}

	i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
		   "AQTX: desc and buffer writeback:\n");
	i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc, buff, buff_size);

	/* save writeback aq if requested */
	if (details->wb_desc)
		i40e_memcpy(details->wb_desc, desc_on_ring,
			    sizeof(struct i40e_aq_desc), I40E_DMA_TO_NONDMA);

	/* update the error if time out occurred */
	if ((!cmd_completed) &&
	    (!details->async && !details->postpone)) {
#ifdef PF_DRIVER
		if (rd32(hw, hw->aq.asq.len) & I40E_GL_ATQLEN_ATQCRIT_MASK) {
#else
		if (rd32(hw, hw->aq.asq.len) & I40E_VF_ATQLEN1_ATQCRIT_MASK) {
#endif
			i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
				   "AQTX: AQ Critical error.\n");
			status = I40E_ERR_ADMIN_QUEUE_CRITICAL_ERROR;
		} else {
			i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
				   "AQTX: Writeback timeout.\n");
			status = I40E_ERR_ADMIN_QUEUE_TIMEOUT;
		}
	}

asq_send_command_error:
	i40e_release_spinlock(&hw->aq.asq_spinlock);
	return status;
}

/**
 *  i40e_fill_default_direct_cmd_desc - AQ descriptor helper function
 *  @desc:     pointer to the temp descriptor (non DMA mem)
 *  @opcode:   the opcode can be used to decide which flags to turn off or on
 *
 *  Fill the desc with default values
 **/
void i40e_fill_default_direct_cmd_desc(struct i40e_aq_desc *desc,
				       u16 opcode)
{
	/* zero out the desc */
	i40e_memset((void *)desc, 0, sizeof(struct i40e_aq_desc),
		    I40E_NONDMA_MEM);
	desc->opcode = CPU_TO_LE16(opcode);
	desc->flags = CPU_TO_LE16(I40E_AQ_FLAG_SI);
}
Ejemplo n.º 4
0
/**
 *  i40e_clean_arq_element
 *  @hw: pointer to the hw struct
 *  @e: event info from the receive descriptor, includes any buffers
 *  @pending: number of events that could be left to process
 *
 *  This function cleans one Admin Receive Queue element and returns
 *  the contents through e.  It can also return how many events are
 *  left to process through 'pending'
 **/
enum i40e_status_code i40e_clean_arq_element(struct i40e_hw *hw,
					     struct i40e_arq_event_info *e,
					     u16 *pending)
{
	enum i40e_status_code ret_code = I40E_SUCCESS;
	u16 ntc = hw->aq.arq.next_to_clean;
	struct i40e_aq_desc *desc;
	struct i40e_dma_mem *bi;
	u16 desc_idx;
	u16 datalen;
	u16 flags;
	u16 ntu;

	/* pre-clean the event info */
	i40e_memset(&e->desc, 0, sizeof(e->desc), I40E_NONDMA_MEM);

	/* take the lock before we start messing with the ring */
	i40e_acquire_spinlock(&hw->aq.arq_spinlock);

	if (hw->aq.arq.count == 0) {
		i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
			   "AQRX: Admin queue not initialized.\n");
		ret_code = I40E_ERR_QUEUE_EMPTY;
		goto clean_arq_element_err;
	}

	/* set next_to_use to head */
#ifdef INTEGRATED_VF
	if (!i40e_is_vf(hw))
		ntu = rd32(hw, hw->aq.arq.head) & I40E_PF_ARQH_ARQH_MASK;
	else
		ntu = rd32(hw, hw->aq.arq.head) & I40E_VF_ARQH1_ARQH_MASK;
#else
#ifdef PF_DRIVER
	ntu = rd32(hw, hw->aq.arq.head) & I40E_PF_ARQH_ARQH_MASK;
#endif /* PF_DRIVER */
#ifdef VF_DRIVER
	ntu = rd32(hw, hw->aq.arq.head) & I40E_VF_ARQH1_ARQH_MASK;
#endif /* VF_DRIVER */
#endif /* INTEGRATED_VF */
	if (ntu == ntc) {
		/* nothing to do - shouldn't need to update ring's values */
		ret_code = I40E_ERR_ADMIN_QUEUE_NO_WORK;
		goto clean_arq_element_out;
	}

	/* now clean the next descriptor */
	desc = I40E_ADMINQ_DESC(hw->aq.arq, ntc);
	desc_idx = ntc;

	hw->aq.arq_last_status =
		(enum i40e_admin_queue_err)LE16_TO_CPU(desc->retval);
	flags = LE16_TO_CPU(desc->flags);
	if (flags & I40E_AQ_FLAG_ERR) {
		ret_code = I40E_ERR_ADMIN_QUEUE_ERROR;
		i40e_debug(hw,
			   I40E_DEBUG_AQ_MESSAGE,
			   "AQRX: Event received with error 0x%X.\n",
			   hw->aq.arq_last_status);
	}

	i40e_memcpy(&e->desc, desc, sizeof(struct i40e_aq_desc),
		    I40E_DMA_TO_NONDMA);
	datalen = LE16_TO_CPU(desc->datalen);
	e->msg_len = min(datalen, e->buf_len);
	if (e->msg_buf != NULL && (e->msg_len != 0))
		i40e_memcpy(e->msg_buf,
			    hw->aq.arq.r.arq_bi[desc_idx].va,
			    e->msg_len, I40E_DMA_TO_NONDMA);

	i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, "AQRX: desc and buffer:\n");
	i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc, e->msg_buf,
		      hw->aq.arq_buf_size);

	/* Restore the original datalen and buffer address in the desc,
	 * FW updates datalen to indicate the event message
	 * size
	 */
	bi = &hw->aq.arq.r.arq_bi[ntc];
	i40e_memset((void *)desc, 0, sizeof(struct i40e_aq_desc), I40E_DMA_MEM);

	desc->flags = CPU_TO_LE16(I40E_AQ_FLAG_BUF);
	if (hw->aq.arq_buf_size > I40E_AQ_LARGE_BUF)
		desc->flags |= CPU_TO_LE16(I40E_AQ_FLAG_LB);
	desc->datalen = CPU_TO_LE16((u16)bi->size);
	desc->params.external.addr_high = CPU_TO_LE32(I40E_HI_DWORD(bi->pa));
	desc->params.external.addr_low = CPU_TO_LE32(I40E_LO_DWORD(bi->pa));

	/* set tail = the last cleaned desc index. */
	wr32(hw, hw->aq.arq.tail, ntc);
	/* ntc is updated to tail + 1 */
	ntc++;
	if (ntc == hw->aq.num_arq_entries)
		ntc = 0;
	hw->aq.arq.next_to_clean = ntc;
	hw->aq.arq.next_to_use = ntu;

#ifdef PF_DRIVER
	i40e_nvmupd_check_wait_event(hw, LE16_TO_CPU(e->desc.opcode), &e->desc);
#endif /* PF_DRIVER */
clean_arq_element_out:
	/* Set pending if needed, unlock and return */
	if (pending != NULL)
		*pending = (ntc > ntu ? hw->aq.arq.count : 0) + (ntu - ntc);
clean_arq_element_err:
	i40e_release_spinlock(&hw->aq.arq_spinlock);

	return ret_code;
}
Ejemplo n.º 5
0
/**
 *  i40e_asq_send_command - send command to Admin Queue
 *  @hw: pointer to the hw struct
 *  @desc: prefilled descriptor describing the command (non DMA mem)
 *  @buff: buffer to use for indirect commands
 *  @buff_size: size of buffer for indirect commands
 *  @cmd_details: pointer to command details structure
 *
 *  This is the main send command driver routine for the Admin Queue send
 *  queue.  It runs the queue, cleans the queue, etc
 **/
enum i40e_status_code i40e_asq_send_command(struct i40e_hw *hw,
				struct i40e_aq_desc *desc,
				void *buff, /* can be NULL */
				u16  buff_size,
				struct i40e_asq_cmd_details *cmd_details)
{
#ifdef I40E_QV
	struct i40e_aq_desc qv_desc = {0};
	struct i40e_aq_desc *qv_desc_on_ring;
#endif /* I40E_QV */
	enum i40e_status_code status = I40E_SUCCESS;
	struct i40e_dma_mem *dma_buff = NULL;
	struct i40e_asq_cmd_details *details;
	struct i40e_aq_desc *desc_on_ring;
	bool cmd_completed = FALSE;
	u16  retval = 0;
	u32  val = 0;

	val = rd32(hw, hw->aq.asq.head);
	if (val >= hw->aq.num_asq_entries) {
		i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
			   "AQTX: head overrun at %d\n", val);
		status = I40E_ERR_QUEUE_EMPTY;
		goto asq_send_command_exit;
	}

	if (hw->aq.asq.count == 0) {
		i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
			   "AQTX: Admin queue not initialized.\n");
		status = I40E_ERR_QUEUE_EMPTY;
		goto asq_send_command_exit;
	}

	if (i40e_is_nvm_update_op(desc) && hw->aq.nvm_busy) {
		i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, "AQTX: NVM busy.\n");
		status = I40E_ERR_NVM;
		goto asq_send_command_exit;
	}

	details = I40E_ADMINQ_DETAILS(hw->aq.asq, hw->aq.asq.next_to_use);
	if (cmd_details) {
		i40e_memcpy(details,
			    cmd_details,
			    sizeof(struct i40e_asq_cmd_details),
			    I40E_NONDMA_TO_NONDMA);

		/* If the cmd_details are defined copy the cookie.  The
		 * CPU_TO_LE32 is not needed here because the data is ignored
		 * by the FW, only used by the driver
		 */
		if (details->cookie) {
			desc->cookie_high =
				CPU_TO_LE32(I40E_HI_DWORD(details->cookie));
			desc->cookie_low =
				CPU_TO_LE32(I40E_LO_DWORD(details->cookie));
		}
	} else {
		i40e_memset(details, 0,
			    sizeof(struct i40e_asq_cmd_details),
			    I40E_NONDMA_MEM);
	}

	/* clear requested flags and then set additional flags if defined */
	desc->flags &= ~CPU_TO_LE16(details->flags_dis);
	desc->flags |= CPU_TO_LE16(details->flags_ena);

	i40e_acquire_spinlock(&hw->aq.asq_spinlock);

	if (buff_size > hw->aq.asq_buf_size) {
		i40e_debug(hw,
			   I40E_DEBUG_AQ_MESSAGE,
			   "AQTX: Invalid buffer size: %d.\n",
			   buff_size);
		status = I40E_ERR_INVALID_SIZE;
		goto asq_send_command_error;
	}

	if (details->postpone && !details->async) {
		i40e_debug(hw,
			   I40E_DEBUG_AQ_MESSAGE,
			   "AQTX: Async flag not set along with postpone flag");
		status = I40E_ERR_PARAM;
		goto asq_send_command_error;
	}

	/* call clean and check queue available function to reclaim the
	 * descriptors that were processed by FW, the function returns the
	 * number of desc available
	 */
	/* the clean function called here could be called in a separate thread
	 * in case of asynchronous completions
	 */
	if (i40e_clean_asq(hw) == 0) {
		i40e_debug(hw,
			   I40E_DEBUG_AQ_MESSAGE,
			   "AQTX: Error queue is full.\n");
		status = I40E_ERR_ADMIN_QUEUE_FULL;
		goto asq_send_command_error;
	}

	/* initialize the temp desc pointer with the right desc */
	desc_on_ring = I40E_ADMINQ_DESC(hw->aq.asq, hw->aq.asq.next_to_use);

	/* if the desc is available copy the temp desc to the right place */
	i40e_memcpy(desc_on_ring, desc, sizeof(struct i40e_aq_desc),
		    I40E_NONDMA_TO_DMA);
#ifdef I40E_QV
	/* copy the descriptor from ring to userspace buffer */
	i40e_memcpy(&qv_desc, desc_on_ring, sizeof(struct i40e_aq_desc),
		     I40E_DMA_TO_NONDMA);
	qv_desc_on_ring = desc_on_ring;
	desc_on_ring = &qv_desc;
#endif /* I40E_QV */

	/* if buff is not NULL assume indirect command */
	if (buff != NULL) {
		dma_buff = &(hw->aq.asq.r.asq_bi[hw->aq.asq.next_to_use]);
		/* copy the user buff into the respective DMA buff */
		i40e_memcpy(dma_buff->va, buff, buff_size,
			    I40E_NONDMA_TO_DMA);
		desc_on_ring->datalen = CPU_TO_LE16(buff_size);

		/* Update the address values in the desc with the pa value
		 * for respective buffer
		 */
		desc_on_ring->params.external.addr_high =
				CPU_TO_LE32(I40E_HI_DWORD(dma_buff->pa));
		desc_on_ring->params.external.addr_low =
				CPU_TO_LE32(I40E_LO_DWORD(dma_buff->pa));
#ifdef I40E_QV
		/* copy the descriptor from userspace buffer to ring */
		i40e_memcpy(qv_desc_on_ring, desc_on_ring,
			    sizeof(struct i40e_aq_desc), I40E_NONDMA_TO_DMA);
#endif /* I40E_QV */
	}

	/* bump the tail */
	i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, "AQTX: desc and buffer:\n");
	i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc_on_ring,
		      buff, buff_size);
	(hw->aq.asq.next_to_use)++;
	if (hw->aq.asq.next_to_use == hw->aq.asq.count)
		hw->aq.asq.next_to_use = 0;
	if (!details->postpone)
		wr32(hw, hw->aq.asq.tail, hw->aq.asq.next_to_use);

	/* if cmd_details are not defined or async flag is not set,
	 * we need to wait for desc write back
	 */
	if (!details->async && !details->postpone) {
		u32 total_delay = 0;
		u32 delay_len = 10;

		do {
#ifdef I40E_QV
			/* copy the descriptor from ring to user buffer */
			i40e_memcpy(desc_on_ring, qv_desc_on_ring,
			    sizeof(struct i40e_aq_desc), I40E_DMA_TO_NONDMA);
#endif /* I40E_QV */
			/* AQ designers suggest use of head for better
			 * timing reliability than DD bit
			 */
			if (i40e_asq_done(hw))
				break;
			/* ugh! delay while spin_lock */
			i40e_usec_delay(delay_len);
			total_delay += delay_len;
		} while (total_delay < hw->aq.asq_cmd_timeout);
	}

	/* if ready, copy the desc back to temp */
	if (i40e_asq_done(hw)) {
#ifdef I40E_QV
		/* Swap pointer back */
		desc_on_ring = qv_desc_on_ring;
#endif /* I40E_QV */
		i40e_memcpy(desc, desc_on_ring, sizeof(struct i40e_aq_desc),
			    I40E_DMA_TO_NONDMA);
		if (buff != NULL)
			i40e_memcpy(buff, dma_buff->va, buff_size,
				    I40E_DMA_TO_NONDMA);
		retval = LE16_TO_CPU(desc->retval);
		if (retval != 0) {
			i40e_debug(hw,
				   I40E_DEBUG_AQ_MESSAGE,
				   "AQTX: Command completed with error 0x%X.\n",
				   retval);

			/* strip off FW internal code */
			retval &= 0xff;
		}
		cmd_completed = TRUE;
		if ((enum i40e_admin_queue_err)retval == I40E_AQ_RC_OK)
			status = I40E_SUCCESS;
		else
			status = I40E_ERR_ADMIN_QUEUE_ERROR;
		hw->aq.asq_last_status = (enum i40e_admin_queue_err)retval;
	}

	i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
		   "AQTX: desc and buffer writeback:\n");
	i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc, buff, buff_size);

	/* update the error if time out occurred */
	if ((!cmd_completed) &&
	    (!details->async && !details->postpone)) {
		i40e_debug(hw,
			   I40E_DEBUG_AQ_MESSAGE,
			   "AQTX: Writeback timeout.\n");
		status = I40E_ERR_ADMIN_QUEUE_TIMEOUT;
	}

	if (!status && i40e_is_nvm_update_op(desc))
		hw->aq.nvm_busy = TRUE;

asq_send_command_error:
	i40e_release_spinlock(&hw->aq.asq_spinlock);
asq_send_command_exit:
	return status;
}
Ejemplo n.º 6
0
/**
 *  i40e_clean_arq_element
 *  @hw: pointer to the hw struct
 *  @e: event info from the receive descriptor, includes any buffers
 *  @pending: number of events that could be left to process
 *
 *  This function cleans one Admin Receive Queue element and returns
 *  the contents through e.  It can also return how many events are
 *  left to process through 'pending'
 **/
enum i40e_status_code i40e_clean_arq_element(struct i40e_hw *hw,
					     struct i40e_arq_event_info *e,
					     u16 *pending)
{
#ifdef I40E_QV
	struct i40e_aq_desc qv_desc = {0};
	struct i40e_aq_desc *qv_desc_on_ring;
#endif /* I40E_QV */
	enum i40e_status_code ret_code = I40E_SUCCESS;
	u16 ntc = hw->aq.arq.next_to_clean;
	struct i40e_aq_desc *desc;
	struct i40e_dma_mem *bi;
	u16 desc_idx;
	u16 datalen;
	u16 flags;
	u16 ntu;

	/* take the lock before we start messing with the ring */
	i40e_acquire_spinlock(&hw->aq.arq_spinlock);

	/* set next_to_use to head */
	ntu = (rd32(hw, hw->aq.arq.head) & I40E_PF_ARQH_ARQH_MASK);
	if (ntu == ntc) {
		/* nothing to do - shouldn't need to update ring's values */
		i40e_debug(hw,
			   I40E_DEBUG_AQ_MESSAGE,
			   "AQRX: Queue is empty.\n");
		ret_code = I40E_ERR_ADMIN_QUEUE_NO_WORK;
		goto clean_arq_element_out;
	}

	/* now clean the next descriptor */
	desc = I40E_ADMINQ_DESC(hw->aq.arq, ntc);
#ifdef I40E_QV
	/* copy the descriptor from ring to userspace buffer */
	i40e_memcpy(&qv_desc, desc, sizeof(struct i40e_aq_desc),
		     I40E_DMA_TO_NONDMA);
	qv_desc_on_ring = desc;
	desc = &qv_desc;
#endif /* I40E_QV */
	desc_idx = ntc;

	flags = LE16_TO_CPU(desc->flags);
	if (flags & I40E_AQ_FLAG_ERR) {
		ret_code = I40E_ERR_ADMIN_QUEUE_ERROR;
		hw->aq.arq_last_status =
			(enum i40e_admin_queue_err)LE16_TO_CPU(desc->retval);
		i40e_debug(hw,
			   I40E_DEBUG_AQ_MESSAGE,
			   "AQRX: Event received with error 0x%X.\n",
			   hw->aq.arq_last_status);
	}

	i40e_memcpy(&e->desc, desc, sizeof(struct i40e_aq_desc),
		    I40E_DMA_TO_NONDMA);
	datalen = LE16_TO_CPU(desc->datalen);
	e->msg_size = min(datalen, e->msg_size);
	if (e->msg_buf != NULL && (e->msg_size != 0))
		i40e_memcpy(e->msg_buf,
			    hw->aq.arq.r.arq_bi[desc_idx].va,
			    e->msg_size, I40E_DMA_TO_NONDMA);

	i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, "AQRX: desc and buffer:\n");
	i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc, e->msg_buf,
		      hw->aq.arq_buf_size);

	/* Restore the original datalen and buffer address in the desc,
	 * FW updates datalen to indicate the event message
	 * size
	 */
	bi = &hw->aq.arq.r.arq_bi[ntc];
	i40e_memset((void *)desc, 0, sizeof(struct i40e_aq_desc), I40E_DMA_MEM);

	desc->flags = CPU_TO_LE16(I40E_AQ_FLAG_BUF);
	if (hw->aq.arq_buf_size > I40E_AQ_LARGE_BUF)
		desc->flags |= CPU_TO_LE16(I40E_AQ_FLAG_LB);
	desc->datalen = CPU_TO_LE16((u16)bi->size);
	desc->params.external.addr_high = CPU_TO_LE32(I40E_HI_DWORD(bi->pa));
	desc->params.external.addr_low = CPU_TO_LE32(I40E_LO_DWORD(bi->pa));
#ifdef I40E_QV
	/* copy the descriptor from userspace buffer to ring */
	i40e_memcpy(qv_desc_on_ring, desc,
		    sizeof(struct i40e_aq_desc), I40E_NONDMA_TO_DMA);
#endif /* I40E_QV */

	/* set tail = the last cleaned desc index. */
	wr32(hw, hw->aq.arq.tail, ntc);
	/* ntc is updated to tail + 1 */
	ntc++;
	if (ntc == hw->aq.num_arq_entries)
		ntc = 0;
	hw->aq.arq.next_to_clean = ntc;
	hw->aq.arq.next_to_use = ntu;

clean_arq_element_out:
	/* Set pending if needed, unlock and return */
	if (pending != NULL)
		*pending = (ntc > ntu ? hw->aq.arq.count : 0) + (ntu - ntc);
	i40e_release_spinlock(&hw->aq.arq_spinlock);

	if (i40e_is_nvm_update_op(&e->desc)) {
		hw->aq.nvm_busy = FALSE;
		if (hw->aq.nvm_release_on_done) {
			i40e_release_nvm(hw);
			hw->aq.nvm_release_on_done = FALSE;
		}
	}

	return ret_code;
}