void lcd_init_device(void)
{
// determine power type
imx233_pinctrl_acquire(3, 16, "lcd power kind");
imx233_pinctrl_set_function(3, 16, PINCTRL_FUNCTION_GPIO);
imx233_pinctrl_enable_gpio(3, 16, false);
udelay(10);
lcd_has_power = !imx233_pinctrl_get_gpio(3, 16);
if(lcd_has_power)
{
imx233_pinctrl_acquire(0, 27, "lcd power");
imx233_pinctrl_set_function(0, 27, PINCTRL_FUNCTION_GPIO);
imx233_pinctrl_enable_gpio(0, 27, true);
imx233_pinctrl_set_gpio(0, 27, true);
}
// determine kind (don't acquire pin because it's a lcdif pin !)
imx233_pinctrl_set_function(1, 0, PINCTRL_FUNCTION_GPIO);
imx233_pinctrl_enable_gpio(1, 0, false);
udelay(10);
lcd_kind = imx233_pinctrl_get_gpio(1, 0);
imx233_lcdif_init();
imx233_lcdif_reset_lcd(false);
imx233_lcdif_reset_lcd(true);
imx233_lcdif_setup_system_pins(16);
imx233_lcdif_set_timings(2, 2, 2, 2);
imx233_lcdif_set_word_length(8);
// set mux ratio
lcd_send(false, 0xca); lcd_send(true, 131);
// set remap, color and depth
lcd_send(false, 0xa0); lcd_send(true, 0x74);
// set master contrast
lcd_send(false, 0xc7); lcd_send(true, 0x8);
// set V_COMH
lcd_send(false, 0xbe); lcd_send(true, lcd_kind ? 0x1c : 0x18);
// set color contrasts
lcd_send(false, 0xc1); lcd_send(true, 0x7b); lcd_send(true, 0x69); lcd_send(true, lcd_kind ? 0xcf : 0x9f);
// set timings
lcd_send(false, 0xb1); lcd_send(true, 0x1f);
lcd_send(false, 0xb3); lcd_send(true, 0x80);
// set precharge voltages
lcd_send(false, 0xbb); lcd_send(true, 0x00); lcd_send(true, 0x00); lcd_send(true, 0x00);
// set master config
lcd_send(false, 0xad); lcd_send(true, 0x8a);
// set power saving mode
lcd_send(false, 0xb0); lcd_send(true, 0x00);
// set normal display (seem to be a SSD1338 only command, not present in SS1339 datasheet)
lcd_send(false, 0xd1); lcd_send(true, 0x02);
// set LUT
lcd_send(false, 0xb8);
static uint8_t lut[32] =
{
0x01, 0x15, 0x19, 0x1D, 0x21, 0x25, 0x29, 0x2D, 0x31, 0x35, 0x39, 0x3D,
0x41, 0x45, 0x49, 0x4D, 0x51, 0x55, 0x59, 0x5D, 0x61, 0x65, 0x69, 0x6D,
0x71, 0x75, 0x79, 0x7D, 0x81, 0x85, 0x89, 0x8D
};
for(int i = 0; i < 32; i++)
lcd_send(true, lut[i]);
// set display offset (this lcd is really wired strangely)
lcd_send(false, 0xa2); lcd_send(true, 128);
// normal display
lcd_send(false, 0xa6);
// sleep mode off
lcd_send(false, 0xaf);
// write ram
lcd_send(false, 0x5c);
imx233_lcdif_set_word_length(16);
for(int y = 0; y < LCD_HEIGHT; y++)
for(int x = 0; x < LCD_WIDTH; x++)
{
uint16_t v = 0;
imx233_lcdif_pio_send(true, 1, &v);
}
#ifdef HAVE_LCD_ENABLE
lcd_on = true;
#endif
}
bool headphones_inserted(void)
{
return !imx233_pinctrl_get_gpio(2, 8);
}
static bool i2c_scl_in(void)
{
return imx233_pinctrl_get_gpio(1, 22);
}
static bool i2c_sda_in(void)
{
return imx233_pinctrl_get_gpio(1, 24);
}
bool button_debug_screen(void)
{
char product_id[RMI_PRODUCT_ID_LEN];
rmi_read(RMI_PRODUCT_ID, RMI_PRODUCT_ID_LEN, product_id);
uint8_t product_info[RMI_PRODUCT_INFO_LEN];
rmi_read(RMI_PRODUCT_INFO, RMI_PRODUCT_INFO_LEN, product_info);
char product_info_str[RMI_PRODUCT_INFO_LEN * 2 + 1];
for(int i = 0; i < RMI_PRODUCT_INFO_LEN; i++)
snprintf(product_info_str + 2 * i, 3, "%02x", product_info[i]);
int x_max = rmi_read_single(RMI_2D_SENSOR_XMAX_MSB(0)) << 8 | rmi_read_single(RMI_2D_SENSOR_XMAX_LSB(0));
int y_max = rmi_read_single(RMI_2D_SENSOR_YMAX_MSB(0)) << 8 | rmi_read_single(RMI_2D_SENSOR_YMAX_LSB(0));
int sensor_resol = rmi_read_single(RMI_2D_SENSOR_RESOLUTION(0));
int min_dist = rmi_read_single(RMI_2D_MIN_DIST);
int gesture_settings = rmi_read_single(RMI_2D_GESTURE_SETTINGS);
int volkeys_delay_counter = 0;
union
{
unsigned char data;
signed char value;
}sensitivity;
rmi_read(RMI_2D_SENSITIVITY_ADJ, 1, &sensitivity.data);
/* Device to screen */
int zone_w = LCD_WIDTH;
int zone_h = (zone_w * y_max + x_max - 1) / x_max;
int zone_x = 0;
int zone_y = LCD_HEIGHT - zone_h;
#define DX2SX(x) (((x) * zone_w ) / x_max)
#define DY2SY(y) (zone_h - ((y) * zone_h ) / y_max)
struct viewport report_vp;
memset(&report_vp, 0, sizeof(report_vp));
report_vp.x = zone_x;
report_vp.y = zone_y;
report_vp.width = zone_w;
report_vp.height = zone_h;
struct viewport gesture_vp;
memset(&gesture_vp, 0, sizeof(gesture_vp));
gesture_vp.x = LCD_WIDTH / 2;
gesture_vp.y = zone_y - 80;
gesture_vp.width = LCD_WIDTH / 2;
gesture_vp.height = 80;
while(1)
{
unsigned char sleep_mode = rmi_read_single(RMI_DEVICE_CONTROL) & RMI_SLEEP_MODE_BM;
lcd_set_viewport(NULL);
lcd_clear_display();
int btns = button_read_device();
lcd_putsf(0, 0, "button bitmap: %x", btns);
lcd_putsf(0, 1, "RMI: id=%s info=%s", product_id, product_info_str);
lcd_putsf(0, 2, "xmax=%d ymax=%d res=%d", x_max, y_max, sensor_resol);
lcd_putsf(0, 3, "attn=%d ctl=%x int=%x",
imx233_pinctrl_get_gpio(0, 27) ? 0 : 1,
rmi_read_single(RMI_DEVICE_CONTROL),
rmi_read_single(RMI_INTERRUPT_REQUEST));
lcd_putsf(0, 4, "sensi: %d min_dist: %d", (int)sensitivity.value, min_dist);
lcd_putsf(0, 5, "gesture: %x", gesture_settings);
union
{
unsigned char data[10];
struct
{
struct rmi_2d_absolute_data_t absolute;
struct rmi_2d_relative_data_t relative;
struct rmi_2d_gesture_data_t gesture;
}s;
}u;
int absolute_x = u.s.absolute.x_msb << 8 | u.s.absolute.x_lsb;
int absolute_y = u.s.absolute.y_msb << 8 | u.s.absolute.y_lsb;
int nr_fingers = u.s.absolute.misc & 7;
bool gesture = (u.s.absolute.misc & 8) == 8;
int palm_width = u.s.absolute.misc >> 4;
rmi_read(RMI_DATA_REGISTER(0), 10, u.data);
lcd_putsf(0, 6, "abs: %d %d %d", absolute_x, absolute_y, (int)u.s.absolute.z);
lcd_putsf(0, 7, "rel: %d %d", (int)u.s.relative.x, (int)u.s.relative.y);
lcd_putsf(0, 8, "gesture: %x %x", u.s.gesture.misc, u.s.gesture.flick);
lcd_putsf(0, 9, "misc: w=%d g=%d f=%d", palm_width, gesture, nr_fingers);
lcd_putsf(30, 7, "sleep_mode: %d", 1 - sleep_mode);
lcd_set_viewport(&report_vp);
lcd_set_drawinfo(DRMODE_SOLID, LCD_RGBPACK(0xff, 0, 0), LCD_BLACK);
lcd_drawrect(0, 0, zone_w, zone_h);
if(nr_fingers == 1)
{
lcd_set_drawinfo(DRMODE_SOLID, LCD_RGBPACK(0, 0, 0xff), LCD_BLACK);
lcd_drawline(DX2SX(absolute_x) - u.s.relative.x,
DY2SY(absolute_y) + u.s.relative.y,
DX2SX(absolute_x), DY2SY(absolute_y));
lcd_set_drawinfo(DRMODE_SOLID, LCD_RGBPACK(0, 0xff, 0), LCD_BLACK);
lcd_fillrect(DX2SX(absolute_x) - 1, DY2SY(absolute_y) - 1, 3, 3);
}
lcd_set_viewport(&gesture_vp);
lcd_set_drawinfo(DRMODE_SOLID, LCD_RGBPACK(0xff, 0xff, 0), LCD_BLACK);
if(u.s.gesture.misc & RMI_2D_GEST_MISC_CONFIRMED)
{
switch(u.s.gesture.misc & RMI_2D_GEST_MISC_TAP_CODE_BM)
{
case RMI_2D_GEST_MISC_NO_TAP: break;
case RMI_2D_GEST_MISC_SINGLE_TAP:
lcd_putsf(0, 0, "TAP!");
break;
case RMI_2D_GEST_MISC_DOUBLE_TAP:
lcd_putsf(0, 0, "DOUBLE TAP!");
break;
case RMI_2D_GEST_MISC_TAP_AND_HOLD:
lcd_putsf(0, 0, "TAP & HOLD!");
break;
default: break;
}
if(u.s.gesture.misc & RMI_2D_GEST_MISC_FLICK)
{
lcd_putsf(0, 1, "FLICK!");
int flick_x = u.s.gesture.flick & RMI_2D_GEST_FLICK_X_BM;
int flick_y = (u.s.gesture.flick & RMI_2D_GEST_FLICK_Y_BM) >> RMI_2D_GEST_FLICK_Y_BP;
#define SIGN4EXT(a) \
if(a & 8) a = -((a ^ 0xf) + 1);
SIGN4EXT(flick_x);
SIGN4EXT(flick_y);
int center_x = (LCD_WIDTH * 2) / 3;
int center_y = 40;
lcd_drawline(center_x, center_y, center_x + flick_x * 5, center_y - flick_y * 5);
}
}
lcd_update();
if(btns & BUTTON_POWER)
break;
if(btns & (BUTTON_VOL_DOWN|BUTTON_VOL_UP))
{
volkeys_delay_counter++;
if(volkeys_delay_counter == 15)
{
if(btns & BUTTON_VOL_UP)
if(sleep_mode > RMI_SLEEP_MODE_FORCE_FULLY_AWAKE)
sleep_mode--;
if(btns & BUTTON_VOL_DOWN)
if(sleep_mode < RMI_SLEEP_MODE_SENSOR_SLEEP)
sleep_mode++;
rmi_set_sleep_mode(sleep_mode);
volkeys_delay_counter = 0;
}
}
yield();
}
