Ejemplo n.º 1
0
/*!
 * Board specific initialization.
 */
static void __init mx6_evk_init(void)
{
	mxc_iomux_v3_setup_multiple_pads(mx6sl_brd_pads,
					ARRAY_SIZE(mx6sl_brd_pads));

	elan_ts_init();

#ifdef CONFIG_MX6_INTER_LDO_BYPASS
	gp_reg_id = mx6sl_evk_dvfscore_data.reg_id;
	soc_reg_id = mx6sl_evk_dvfscore_data.soc_id;
#else
	gp_reg_id = mx6sl_evk_dvfscore_data.reg_id;
	soc_reg_id = mx6sl_evk_dvfscore_data.soc_id;
	pu_reg_id = mx6sl_evk_dvfscore_data.pu_id;
	mx6_cpu_regulator_init();
#endif

	imx6q_add_imx_snvs_rtc();

	imx6q_add_imx_i2c(0, &mx6_evk_i2c0_data);
	imx6q_add_imx_i2c(1, &mx6_evk_i2c1_data);
	i2c_register_board_info(0, mxc_i2c0_board_info,
			ARRAY_SIZE(mxc_i2c0_board_info));
	i2c_register_board_info(1, mxc_i2c1_board_info,
			ARRAY_SIZE(mxc_i2c1_board_info));
	imx6q_add_imx_i2c(2, &mx6_evk_i2c2_data);
	i2c_register_board_info(2, mxc_i2c2_board_info,
			ARRAY_SIZE(mxc_i2c2_board_info));

	/* SPI */
	imx6q_add_ecspi(0, &mx6_evk_spi_data);
	spi_device_init();

	mx6sl_evk_init_pfuze100(0);

	imx6q_add_anatop_thermal_imx(1, &mx6sl_anatop_thermal_data);

	mx6_evk_init_uart();
	/* get enet tx reference clk from FEC_REF_CLK pad.
	 * GPR1[14] = 0, GPR1[18:17] = 00
	 */
	mxc_iomux_set_gpr_register(1, 14, 1, 0);
	mxc_iomux_set_gpr_register(1, 17, 2, 0);

	imx6_init_fec(fec_data);

	platform_device_register(&evk_vmmc_reg_devices);
	imx6q_add_sdhci_usdhc_imx(0, &mx6_evk_sd1_data);
	imx6q_add_sdhci_usdhc_imx(1, &mx6_evk_sd2_data);
	imx6q_add_sdhci_usdhc_imx(2, &mx6_evk_sd3_data);

	mx6_evk_init_usb();
	imx6q_add_otp();
	imx6q_add_mxc_pwm(0);
	imx6q_add_mxc_pwm_backlight(0, &mx6_evk_pwm_backlight_data);
	imx6dl_add_imx_elcdif(&fb_data[0]);

	gpio_request(MX6_BRD_LCD_PWR_EN, "elcdif-power-on");
	gpio_direction_output(MX6_BRD_LCD_PWR_EN, 1);
	mxc_register_device(&lcd_wvga_device, NULL);

	imx6dl_add_imx_pxp();
	imx6dl_add_imx_pxp_client();
	mxc_register_device(&max17135_sensor_device, NULL);
	setup_spdc();
	if (!spdc_sel)
		imx6dl_add_imx_epdc(&epdc_data);
	else
		imx6sl_add_imx_spdc(&spdc_data);
	imx6q_add_dvfs_core(&mx6sl_evk_dvfscore_data);

	imx6q_init_audio();

	imx6q_add_viim();
	imx6q_add_imx2_wdt(0, NULL);

	imx_add_viv_gpu(&imx6_gpu_data, &imx6q_gpu_pdata);
	imx6sl_add_imx_keypad(&mx6sl_evk_map_data);
	imx6q_add_busfreq();
	imx6sl_add_dcp();
	imx6sl_add_rngb();
	imx6sl_add_imx_pxp_v4l2();

	imx6q_add_perfmon(0);
	imx6q_add_perfmon(1);
	imx6q_add_perfmon(2);
	/* Register charger chips */
	platform_device_register(&evk_max8903_charger_1);
	pm_power_off = mx6_snvs_poweroff;
}
/*!
 * Board specific initialization.
 */
static void __init mx6_evk_init(void)
{
	u32 i;

	mxc_iomux_v3_setup_multiple_pads(mx6sl_brd_pads,
					ARRAY_SIZE(mx6sl_brd_pads));

#ifdef CONFIG_MX6_INTER_LDO_BYPASS
	gp_reg_id = mx6sl_evk_dvfscore_data.reg_id;
	soc_reg_id = mx6sl_evk_dvfscore_data.soc_id;
#else
	gp_reg_id = mx6sl_evk_dvfscore_data.reg_id;
	soc_reg_id = mx6sl_evk_dvfscore_data.soc_id;
	pu_reg_id = mx6sl_evk_dvfscore_data.pu_id;
	mx6_cpu_regulator_init();
#endif

	imx6q_add_imx_snvs_rtc();

	imx6q_add_imx_i2c(0, &mx6_evk_i2c0_data);
	imx6q_add_imx_i2c(1, &mx6_evk_i2c1_data);

	/*  setting sii902x address when hdmi enabled */
	switch (display_panel_mode) {
	case PANEL_MODE_EINK:
		for (i = 0; i < ARRAY_SIZE(mxc_i2c0_board_info); i++)
			if (!strcmp(mxc_i2c0_board_info[i].type, "max17135"))
				mxc_i2c0_board_info[i].addr = 0x48;
		for (i = 0; i < ARRAY_SIZE(mxc_i2c0_board_info); i++)
			if (!strcmp(mxc_i2c0_board_info[i].type, "elan-touch"))
				mxc_i2c0_board_info[i].addr = 0x10;
		elan_ts_init();
		mxc_register_device(&max17135_sensor_device, NULL);
		setup_spdc();
		if (!spdc_sel)
			imx6dl_add_imx_epdc(&epdc_data);
		else
			imx6sl_add_imx_spdc(&spdc_data);
		break;
	case PANEL_MODE_HDMI:
		for (i = 0; i < ARRAY_SIZE(mxc_i2c1_board_info); i++)
			if (!strcmp(mxc_i2c1_board_info[i].type, "sii902x"))
				mxc_i2c1_board_info[i].addr = 0x39;
#ifdef CONFIG_IMX_HAVE_PLATFORM_IMX_ELCDIF//[		
		imx6dl_add_imx_elcdif(&hdmi_fb_data[0]);
#endif //]CONFIG_IMX_HAVE_PLATFORM_IMX_ELCDIF
		mxc_spdif_data.spdif_core_clk = clk_get_sys("mxc_spdif.0",
								NULL);
		clk_put(mxc_spdif_data.spdif_core_clk);
		imx6q_add_spdif(&mxc_spdif_data);
		imx6q_add_spdif_dai();
		imx6q_add_spdif_audio_device();
		break;
	case PANEL_MODE_LCD:
#ifdef CONFIG_IMX_HAVE_PLATFORM_IMX_ELCDIF//[		
		imx6dl_add_imx_elcdif(&wvga_fb_data[0]);
#endif //]CONFIG_IMX_HAVE_PLATFORM_IMX_ELCDIF
		gpio_request(MX6_BRD_LCD_PWR_EN, "elcdif-power-on");
		gpio_direction_output(MX6_BRD_LCD_PWR_EN, 1);
		mxc_register_device(&lcd_wvga_device, NULL);
		break;
	default:
		pr_err("Error display_panel_mode\n");
	}

	i2c_register_board_info(0, mxc_i2c0_board_info,
			ARRAY_SIZE(mxc_i2c0_board_info));
	i2c_register_board_info(1, mxc_i2c1_board_info,
			ARRAY_SIZE(mxc_i2c1_board_info));

	/* only camera on I2C2, that's why we can do so */
	if (csi_enabled == 1) {
		mxc_register_device(&csi_v4l2_devices, NULL);
		imx6q_add_imx_i2c(2, &mx6_evk_i2c2_data);
		i2c_register_board_info(2, mxc_i2c2_board_info,
				ARRAY_SIZE(mxc_i2c2_board_info));
	}

	/* SPI */
	imx6q_add_ecspi(0, &mx6_evk_spi_data);
	spi_device_init();

	mx6sl_evk_init_pfuze100(0);

	imx6q_add_anatop_thermal_imx(1, &mx6sl_anatop_thermal_data);

	mx6_evk_init_uart();
	/* get enet tx reference clk from FEC_REF_CLK pad.
	 * GPR1[14] = 0, GPR1[18:17] = 00
	 */
	mxc_iomux_set_gpr_register(1, 14, 1, 0);
	mxc_iomux_set_gpr_register(1, 17, 2, 0);

	imx6_init_fec(fec_data);

	platform_device_register(&evk_vmmc_reg_devices);
	imx6q_add_sdhci_usdhc_imx(1, &mx6_evk_sd2_data);
	imx6q_add_sdhci_usdhc_imx(0, &mx6_evk_sd1_data);
	imx6q_add_sdhci_usdhc_imx(2, &mx6_evk_sd3_data);

	mx6_evk_init_usb();
	imx6q_add_otp();
	imx6q_add_mxc_pwm(0);
	imx6q_add_mxc_pwm_backlight(0, &mx6_evk_pwm_backlight_data);
#ifdef CONFIG_IMX_HAVE_PLATFORM_IMX_ELCDIF//[
		imx6dl_add_imx_elcdif(&wvga_fb_data[0]);
#endif //] CONFIG_IMX_HAVE_PLATFORM_IMX_ELCDIF

		gpio_request(MX6_BRD_LCD_PWR_EN, "elcdif-power-on");
		gpio_direction_output(MX6_BRD_LCD_PWR_EN, 1);
		mxc_register_device(&lcd_wvga_device, NULL);

	imx6dl_add_imx_pxp();
	imx6dl_add_imx_pxp_client();

	if (csi_enabled) {
		imx6sl_add_fsl_csi();
	}
	imx6q_add_dvfs_core(&mx6sl_evk_dvfscore_data);

	imx6q_init_audio();

	/* uart2 for bluetooth */
	if (uart2_enabled)
		uart2_init();

	//mxc_register_device(&mxc_bt_rfkill, &mxc_bt_rfkill_data);

	imx6q_add_viim();
	imx6q_add_imx2_wdt(0, NULL);

	imx_add_viv_gpu(&imx6_gpu_data, &imx6q_gpu_pdata);
	imx6sl_add_device_buttons();
	imx6sl_add_imx_keypad(&mx6sl_evk_map_data);
	imx6q_add_busfreq();
	imx6sl_add_dcp();
	imx6sl_add_rngb();
	imx6sl_add_imx_pxp_v4l2();

	imx6q_add_perfmon(0);
	imx6q_add_perfmon(1);
	imx6q_add_perfmon(2);
	/* Register charger chips */
	platform_device_register(&evk_max8903_charger_1);
	pm_power_off = mx6_snvs_poweroff;
}
Ejemplo n.º 3
0
/*!
 * Board specific initialization.
 */
static void __init mx6_evk_init(void)
{
	u32 i;

	mxc_iomux_v3_setup_multiple_pads(mx6sl_brd_pads,
					ARRAY_SIZE(mx6sl_brd_pads));

	elan_ts_init();

	gp_reg_id = mx6sl_evk_dvfscore_data.reg_id;
	soc_reg_id = mx6sl_evk_dvfscore_data.soc_id;

	imx6q_add_imx_snvs_rtc();

	imx6q_add_imx_i2c(0, &mx6_evk_i2c0_data);
	imx6q_add_imx_i2c(1, &mx6_evk_i2c1_data);
	i2c_register_board_info(0, mxc_i2c0_board_info,
			ARRAY_SIZE(mxc_i2c0_board_info));

	/*  setting sii902x address when hdmi enabled */
	if (hdmi_enabled) {
		for (i = 0; i < ARRAY_SIZE(mxc_i2c1_board_info); i++) {
			if (!strcmp(mxc_i2c1_board_info[i].type, "sii902x")) {
				mxc_i2c1_board_info[i].addr = 0x39;
				break;
			}
		}
	}

	i2c_register_board_info(1, mxc_i2c1_board_info,
			ARRAY_SIZE(mxc_i2c1_board_info));
	/* only camera on I2C3, that's why we can do so */
	if (csi_enabled == 1) {
		mxc_register_device(&csi_v4l2_devices, NULL);
		imx6q_add_imx_i2c(2, &mx6_evk_i2c2_data);
		i2c_register_board_info(2, mxc_i2c2_board_info,
				ARRAY_SIZE(mxc_i2c2_board_info));
	}

	/* SPI */
	imx6q_add_ecspi(0, &mx6_evk_spi_data);
	spi_device_init();

	mx6sl_evk_init_pfuze100(0);

	imx6q_add_anatop_thermal_imx(1, &mx6sl_anatop_thermal_data);

	mx6_evk_init_uart();
	/* get enet tx reference clk from FEC_REF_CLK pad.
	 * GPR1[14] = 0, GPR1[18:17] = 00
	 */
	mxc_iomux_set_gpr_register(1, 14, 1, 0);
	mxc_iomux_set_gpr_register(1, 17, 2, 0);

	imx6_init_fec(fec_data);

	platform_device_register(&evk_vmmc_reg_devices);
	imx6q_add_sdhci_usdhc_imx(1, &mx6_evk_sd2_data);
	imx6q_add_sdhci_usdhc_imx(0, &mx6_evk_sd1_data);
	imx6q_add_sdhci_usdhc_imx(2, &mx6_evk_sd3_data);

	mx6_evk_init_usb();
	imx6q_add_otp();
	imx6q_add_mxc_pwm(0);
	imx6q_add_mxc_pwm_backlight(0, &mx6_evk_pwm_backlight_data);

	if (hdmi_enabled) {
		imx6dl_add_imx_elcdif(&hdmi_fb_data[0]);
	} else {
		imx6dl_add_imx_elcdif(&wvga_fb_data[0]);

		gpio_request(MX6_BRD_LCD_PWR_EN, "elcdif-power-on");
		gpio_direction_output(MX6_BRD_LCD_PWR_EN, 1);
		mxc_register_device(&lcd_wvga_device, NULL);
	}

	imx6dl_add_imx_pxp();
	imx6dl_add_imx_pxp_client();
	mxc_register_device(&max17135_sensor_device, NULL);
	setup_spdc();
	if (csi_enabled) {
		imx6sl_add_fsl_csi();
	} else  {
		if (!spdc_sel)
			imx6dl_add_imx_epdc(&epdc_data);
		else
			imx6sl_add_imx_spdc(&spdc_data);
	}
	imx6q_add_dvfs_core(&mx6sl_evk_dvfscore_data);

	imx6q_init_audio();

	/* uart2 for bluetooth */
#ifdef SXSDMAN_BLUETOOTH_ENABLE
	if (uart4_enabled)
		uart4_init();
#else
	if (uart2_enabled)
		uart2_init();
#endif

	mxc_register_device(&mxc_bt_rfkill, &mxc_bt_rfkill_data);

	imx6q_add_viim();
	imx6q_add_imx2_wdt(0, NULL);

	imx_add_viv_gpu(&imx6_gpu_data, &imx6q_gpu_pdata);
	imx6sl_add_imx_keypad(&mx6sl_evk_map_data);
	imx6q_add_busfreq();
	imx6sl_add_dcp();
	imx6sl_add_rngb();
	imx6sl_add_imx_pxp_v4l2();

	mxc_spdif_data.spdif_core_clk = clk_get_sys("mxc_spdif.0", NULL);
	clk_put(mxc_spdif_data.spdif_core_clk);
	imx6q_add_spdif(&mxc_spdif_data);
	imx6q_add_spdif_dai();
	imx6q_add_spdif_audio_device();

	imx6q_add_perfmon(0);
	imx6q_add_perfmon(1);
	imx6q_add_perfmon(2);
	/* Register charger chips */
	platform_device_register(&evk_max8903_charger_1);
	pm_power_off = mx6_snvs_poweroff;
	imx6q_add_pm_imx(0, &mx6sl_evk_pm_data);

	if (imx_ion_data.heaps[0].size)
		platform_device_register_resndata(NULL, "ion-mxc", 0, NULL, 0, \
		&imx_ion_data, sizeof(imx_ion_data) + sizeof(struct ion_platform_heap));

}
/*!
 * Board specific initialization.
 */
static void __init mx6_sabresd_board_init(void)
{
	int i;
	struct clk *clko, *clko2;
	struct clk *new_parent;
	int rate;

	if (cpu_is_mx6q())
		mxc_iomux_v3_setup_multiple_pads(mx6q_sabresd_pads,
			ARRAY_SIZE(mx6q_sabresd_pads));
	else if (cpu_is_mx6dl()) {
		mxc_iomux_v3_setup_multiple_pads(mx6dl_sabresd_pads,
			ARRAY_SIZE(mx6dl_sabresd_pads));
	}

	dsa2lb_init();

#ifdef CONFIG_FEC_1588
	/* Set GPIO_16 input for IEEE-1588 ts_clk and RMII reference clock
	 * For MX6 GPR1 bit21 meaning:
	 * Bit21:       0 - GPIO_16 pad output
	 *              1 - GPIO_16 pad input
	 */
	 mxc_iomux_set_gpr_register(1, 21, 1, 1);
#endif

	gp_reg_id = sabresd_dvfscore_data.reg_id;
	soc_reg_id = sabresd_dvfscore_data.soc_id;
	mx6q_sabresd_init_uart();
	imx6x_add_ram_console();

	/*
	 * MX6DL/Solo only supports single IPU
	 * The following codes are used to change ipu id
	 * and display id information for MX6DL/Solo. Then
	 * register 1 IPU device and up to 2 displays for
	 * MX6DL/Solo
	 */
	if (cpu_is_mx6dl()) {
		/* [Walker Chen], 2014/01/08 - modified for dual display mode
			mx6dl only have one ipu
			ipu0:disp0 for HDMI
			ipu0:disp1 for LVDS
		*/
		ldb_data.ipu_id = 0;
		ldb_data.disp_id = 1;
		hdmi_core_data.ipu_id = 0;
		hdmi_core_data.disp_id = 0;
		//mipi_dsi_pdata.ipu_id = 0;
		//mipi_dsi_pdata.disp_id = 1;
		ldb_data.sec_ipu_id = 0;
		ldb_data.sec_disp_id = 0;
	}
	imx6q_add_mxc_hdmi_core(&hdmi_core_data);

	imx6q_add_ipuv3(0, &ipu_data[0]);
	if (cpu_is_mx6q()) {
		imx6q_add_ipuv3(1, &ipu_data[1]);
		for (i = 0; i < 4 && i < ARRAY_SIZE(sabresd_fb_data); i++)
			imx6q_add_ipuv3fb(i, &sabresd_fb_data[i]);
	} else
		for (i = 0; i < 2 && i < ARRAY_SIZE(sabresd_fb_data); i++)
			imx6q_add_ipuv3fb(i, &sabresd_fb_data[i]);

	imx6q_add_vdoa();
	//imx6q_add_mipi_dsi(&mipi_dsi_pdata);
	imx6q_add_lcdif(&lcdif_data);
	imx6q_add_ldb(&ldb_data);
	imx6q_add_v4l2_output(0);
	//imx6q_add_v4l2_capture(0, &capture_data[0]);
	//imx6q_add_v4l2_capture(1, &capture_data[1]);
	//imx6q_add_imx_snvs_rtc();

	if (1 == caam_enabled)
		imx6q_add_imx_caam();

	strcpy(mxc_i2c0_board_info[0].type, "wm8962");
	mxc_i2c0_board_info[0].platform_data = &wm8962_config_data;
	imx6q_add_device_gpio_leds();

	imx6q_add_imx_i2c(0, &mx6q_sabresd_i2c_data);
	imx6q_add_imx_i2c(1, &mx6q_sabresd_i2c_data);
	imx6q_add_imx_i2c(2, &mx6q_sabresd_i2c_data);
	i2c_register_board_info(0, mxc_i2c0_board_info,
			ARRAY_SIZE(mxc_i2c0_board_info));
	i2c_register_board_info(1, mxc_i2c1_board_info,
			ARRAY_SIZE(mxc_i2c1_board_info));
	//i2c_register_board_info(2, mxc_i2c2_board_info,
	//		ARRAY_SIZE(mxc_i2c2_board_info));
	mx6q_dsa2lb_init_wm8326();

	/* spdif */
	mxc_spdif_data.spdif_core_clk = clk_get_sys("mxc_spdif.0", NULL);
	clk_put(mxc_spdif_data.spdif_core_clk);
	imx6q_add_spdif(&mxc_spdif_data);
	imx6q_add_spdif_dai();
	imx6q_add_spdif_audio_device();
	
	/* SPI */
	imx6q_add_ecspi(0, &mx6q_sabresd_spi_data);
	spi_device_init();

	imx6q_add_mxc_hdmi(&hdmi_data);

	imx6q_add_anatop_thermal_imx(1, &mx6q_sabresd_anatop_thermal_data);
	imx6_init_fec(fec_data);
#ifdef CONFIG_MX6_ENET_IRQ_TO_GPIO
	/* Make sure the IOMUX_OBSRV_MUX1 is set to ENET_IRQ. */
	mxc_iomux_set_specialbits_register(IOMUX_OBSRV_MUX1_OFFSET,
		OBSRV_MUX1_ENET_IRQ, OBSRV_MUX1_MASK);
#endif

	imx6q_add_pm_imx(0, &mx6q_sabresd_pm_data);

	/* Move sd4 to first because sd4 connect to emmc.
	   Mfgtools want emmc is mmcblk0 and other sd card is mmcblk1.
	*/
	//imx6q_add_sdhci_usdhc_imx(3, &mx6q_sabresd_sd4_data);
	//imx6q_add_sdhci_usdhc_imx(2, &mx6q_sabresd_sd3_data);
	imx6q_add_sdhci_usdhc_imx(1, &mx6q_sabresd_sd2_data);
	imx_add_viv_gpu(&imx6_gpu_data, &imx6q_gpu_pdata);
	imx6q_sabresd_init_usb();
	/* SATA is not supported by MX6DL/Solo */
	if (cpu_is_mx6q()) {
#ifdef CONFIG_SATA_AHCI_PLATFORM
		imx6q_add_ahci(0, &mx6q_sabresd_sata_data);
#else
		mx6q_sabresd_sata_init(NULL,
			(void __iomem *)ioremap(MX6Q_SATA_BASE_ADDR, SZ_4K));
#endif
	}
	imx6q_add_vpu();
	imx6q_init_audio();
	platform_device_register(&sabresd_vmmc_reg_devices);
	imx_asrc_data.asrc_core_clk = clk_get(NULL, "asrc_clk");
	imx_asrc_data.asrc_audio_clk = clk_get(NULL, "asrc_serial_clk");
	imx6q_add_asrc(&imx_asrc_data);

	/*
	 * Disable HannStar touch panel CABC function,
	 * this function turns the panel's backlight automatically
	 * according to the content shown on the panel which
	 * may cause annoying unstable backlight issue.
	 */
	//gpio_request(SABRESD_CABC_EN0, "cabc-en0");
	//gpio_direction_output(SABRESD_CABC_EN0, 0);
	//gpio_request(SABRESD_CABC_EN1, "cabc-en1");
	//gpio_direction_output(SABRESD_CABC_EN1, 0);

	imx6q_add_mxc_pwm(0);
	imx6q_add_mxc_pwm(1);
	imx6q_add_mxc_pwm(2);
	imx6q_add_mxc_pwm(3);
	imx6q_add_mxc_pwm_backlight(0, &mx6_sabresd_pwm_backlight_data);

	imx6q_add_otp();
	imx6q_add_viim();
	imx6q_add_imx2_wdt(0, NULL);
	imx6q_add_dma();

	imx6q_add_dvfs_core(&sabresd_dvfscore_data);

	if (imx_ion_data.heaps[0].size)
		imx6q_add_ion(0, &imx_ion_data,
			sizeof(imx_ion_data) + sizeof(struct ion_platform_heap));

	imx6q_add_device_buttons();

	///* enable sensor 3v3 and 1v8 */
	//gpio_request(SABRESD_SENSOR_EN, "sensor-en");
	//gpio_direction_output(SABRESD_SENSOR_EN, 1);

	/* enable ecompass intr */
	//gpio_request(SABRESD_eCOMPASS_INT, "ecompass-int");
	//gpio_direction_input(SABRESD_eCOMPASS_INT);
	/* enable light sensor intr */
	//gpio_request(SABRESD_ALS_INT, "als-int");
	//gpio_direction_input(SABRESD_ALS_INT);

	imx6q_add_hdmi_soc();
	imx6q_add_hdmi_soc_dai();

	if (cpu_is_mx6dl()) {
		imx6dl_add_imx_pxp();
		imx6dl_add_imx_pxp_client();
	}

	clko2 = clk_get(NULL, "clko2_clk");
	if (IS_ERR(clko2))
		pr_err("can't get CLKO2 clock.\n");

	new_parent = clk_get(NULL, "osc_clk");
	if (!IS_ERR(new_parent)) {
		clk_set_parent(clko2, new_parent);
		clk_put(new_parent);
	}
	rate = clk_round_rate(clko2, 24000000);
	clk_set_rate(clko2, rate);
	clk_enable(clko2);

	/* Camera and audio use osc clock */
	clko = clk_get(NULL, "clko_clk");
	if (!IS_ERR(clko))
		clk_set_parent(clko, clko2);

	/* Enable Aux_5V */
	//gpio_request(SABRESD_AUX_5V_EN, "aux_5v_en");
	//gpio_direction_output(SABRESD_AUX_5V_EN, 1);
	//gpio_set_value(SABRESD_AUX_5V_EN, 1);

	//gps_power_on(true);
	/* Register charger chips */
	platform_device_register(&sabresd_max8903_charger_1);
	//pm_power_off = mx6_snvs_poweroff;
	pm_power_off = arch_poweroff;
	imx6q_add_busfreq();

	/* Add PCIe RC interface support
	 * uart5 has pin mux with pcie. or you will use uart5 or use pcie
	 */
	if (cpu_is_mx6dl()) {
		mxc_iomux_v3_setup_multiple_pads(mx6dl_arm2_elan_pads,
						ARRAY_SIZE(mx6dl_arm2_elan_pads));
	}

	imx6_add_armpmu();
	imx6q_add_perfmon(0);
	imx6q_add_perfmon(1);
	imx6q_add_perfmon(2);
}