ossimRefPtr<ossimImageGeometry> ossimPngReader::getImageGeometry()
{
if ( !theGeometry )
{
//---
// Check factory for external geom:
//---
theGeometry = getExternalImageGeometry();
if ( !theGeometry )
{
// Fist time through:
theGeometry = new ossimImageGeometry();
//---
// This code does not call ossimImageGeometryRegistry::extendGeometry
// by design to avoid wasted factory calls.
//---
}
// Set image things the geometry object should know about.
initImageParameters( theGeometry.get() );
}
return theGeometry;
}
ossimRefPtr<ossimImageGeometry> ossimLasReader::getImageGeometry()
{
if ( !theGeometry )
{
// Check for external geom:
theGeometry = getExternalImageGeometry();
if ( !theGeometry )
{
theGeometry = new ossimImageGeometry();
if ( m_proj.valid() )
{
theGeometry->setProjection( m_proj.get() );
}
else
{
//---
// WARNING:
// Must create/set theGeometry at this point or the next call to
// ossimImageGeometryRegistry::extendGeometry will put us in an infinite loop
// as it does a recursive call back to ossimImageHandler::getImageGeometry().
//---
// Try factories for projection.
ossimImageGeometryRegistry::instance()->extendGeometry(this);
}
}
// Set image things the geometry object should know about.
initImageParameters( theGeometry.get() );
}
return theGeometry;
}
//************************************************************************************************
//! Returns the image geometry object associated with this tile source or NULL if non defined.
//! The geometry contains full-to-local image transform as well as projection (image-to-world)
//************************************************************************************************
rspfRefPtr<rspfImageGeometry> rspfEnviTileSource::getImageGeometry()
{
if ( !theGeometry )
{
// Check for external geom:
theGeometry = getExternalImageGeometry();
if ( !theGeometry )
{
// Check the internal geometry first to avoid a factory call.
theGeometry = getInternalImageGeometry();
// At this point it is assured theGeometry is set.
//---
// WARNING:
// Must create/set theGeometry at this point or the next call to
// rspfImageGeometryRegistry::extendGeometry will put us in an infinite loop
// as it does a recursive call back to rspfImageHandler::getImageGeometry().
//---
// Check for set projection.
if ( theGeometry.valid()&&!theGeometry->getProjection() )
{
// Try factories for projection.
rspfImageGeometryRegistry::instance()->extendGeometry(this);
}
}
// Set image things the geometry object should know about.
initImageParameters( theGeometry.get() );
}
return theGeometry;
}
ossimRefPtr<ossimImageGeometry> ossimMrSidReader::getImageGeometry()
{
if ( !theGeometry )
{
//---
// Check for external geom:
//---
theGeometry = getExternalImageGeometry();
if ( !theGeometry )
{
//---
// Check the internal geometry first to avoid a factory call.
//---
theGeometry = getInternalImageGeometry();
// At this point it is assured theGeometry is set.
// Check for set projection.
if ( !theGeometry->getProjection() )
{
// Try factories for projection.
ossimImageGeometryRegistry::instance()->extendGeometry(this);
}
}
// Set image things the geometry object should know about.
initImageParameters( theGeometry.get() );
}
return theGeometry;
}
ossimRefPtr<ossimImageGeometry> ossimNdfTileSource::getImageGeometry()
{
if ( !theGeometry )
{
// Check for external geom:
theGeometry = getExternalImageGeometry();
if ( !theGeometry )
{
theGeometry = new ossimImageGeometry();
// Validate Header to ensure we support this data type
ossimNdfHeader lnh(theHeaderFile);
if(lnh.getErrorStatus() == ossimErrorCodes::OSSIM_OK)
{
// Get the projection info.
ossimKeywordlist kwl;
kwl.add(lnh.getGeom());
// Create the projection.
ossimRefPtr<ossimProjection> proj = ossimProjectionFactoryRegistry::instance()->
createProjection(kwl);
if ( proj.valid() )
{
// Assign projection to our ossimImageGeometry object.
theGeometry->setProjection( proj.get() );
}
}
// At this point it is assured theGeometry is set.
//---
// WARNING:
// Must create/set theGeometry at this point or the next call to
// ossimImageGeometryRegistry::extendGeometry will put us in an infinite loop
// as it does a recursive call back to ossimImageHandler::getImageGeometry().
//---
// Check for set projection.
if ( !theGeometry->getProjection() )
{
// Try factories for projection.
ossimImageGeometryRegistry::instance()->extendGeometry(this);
}
}
// Set image things the geometry object should know about.
initImageParameters( theGeometry.get() );
}
return theGeometry;
}
//************************************************************************************************
//! Returns the image geometry object associated with this tile source or NULL if non defined.
//! The geometry contains full-to-local image transform as well as projection (image-to-world)
//************************************************************************************************
ossimRefPtr<ossimImageGeometry> ossimSrtmTileSource::getImageGeometry()
{
if(!theGeometry.valid())
{
// First time through set the projection.
theGeometry = new ossimImageGeometry();
theGeometry->setProjection( m_SrtmSupportData.getProjection().get() );
// Set image things the geometry object should know about.
initImageParameters( theGeometry.get() );
}
return theGeometry;
}
//**************************************************************************************************
// Returns the image geometry object associated with this tile source or NULL if non defined.
//**************************************************************************************************
rspfRefPtr<rspfImageGeometry> rspfVpfTileSource::getImageGeometry()
{
if (theGeometry.valid()) return theGeometry;
rspfRefPtr<rspfImageGeometry> annotGeom = m_AnnotationSource->getImageGeometry();
if ( annotGeom.valid() )
{
// Copy the annotation source's geometry as our own:
theGeometry = new rspfImageGeometry(*annotGeom);
// Set image things the geometry object should know about.
initImageParameters( theGeometry.get() );
return theGeometry;
}
return rspfRefPtr<rspfImageGeometry>();
}
ossimRefPtr<ossimImageGeometry> ossimLandsatTileSource::getImageGeometry()
{
if ( !theGeometry )
{
// Check for external geom:
theGeometry = getExternalImageGeometry();
if ( !theGeometry )
{
theGeometry = new ossimImageGeometry();
if ( theFfHdr.valid() )
{
// Make a model
ossimLandSatModel* model = new ossimLandSatModel (*theFfHdr);
if (model->getErrorStatus() == ossimErrorCodes::OSSIM_OK)
{
//initialize the image geometry object with the model
theGeometry->setProjection(model);
}
}
//---
// WARNING:
// Must create/set the geometry at this point or the next call to
// ossimImageGeometryRegistry::extendGeometry will put us in an infinite loop
// as it does a recursive call back to ossimImageHandler::getImageGeometry().
//---
// Check for set projection.
if ( !theGeometry->getProjection() )
{
// Try factories for projection.
ossimImageGeometryRegistry::instance()->extendGeometry(this);
}
}
// Set image things the geometry object should know about.
initImageParameters( theGeometry.get() );
}
return theGeometry;
}
ossimRefPtr<ossimImageGeometry> ossimH5Reader::getImageGeometry()
{
if ( !theGeometry )
{
//---
// Check for external geom:
//---
theGeometry = getExternalImageGeometry();
if ( !theGeometry )
{
//---
// WARNING:
// Must create/set the geometry at this point or the next call to
// ossimImageGeometryRegistry::extendGeometry will put us in an infinite loop
// as it does a recursive call back to ossimImageHandler::getImageGeometry().
//---
// Check the internal geometry first to avoid a factory call.
m_mutex.lock();
theGeometry = getInternalImageGeometry();
m_mutex.unlock();
// At this point it is assured theGeometry is set.
// Check for set projection.
if ( !theGeometry->getProjection() )
{
// Try factories for projection.
ossimImageGeometryRegistry::instance()->extendGeometry(this);
}
}
// Set image things the geometry object should know about.
initImageParameters( theGeometry.get() );
}
return theGeometry;
}
//**************************************************************************************************
//! Returns the image geometry object associated with this tile source or NULL if non defined.
//! The geometry contains full-to-local image transform as well as projection (image-to-world)
//**************************************************************************************************
rspfRefPtr<rspfImageGeometry> rspfDoqqTileSource::getImageGeometry()
{
if (theGeometry.valid()) return theGeometry;
if(theHeaderInformation.valid())
{
rspfKeywordlist kwl;
const char* prefix = 0; // legacy
rspfString proj = theHeaderInformation->theProjection.trim().upcase();
rspfString datum = theHeaderInformation->theDatum.trim().upcase();
if(proj == rspfString("UTM") || proj == rspfString("1"))
{
kwl.add(prefix,
rspfKeywordNames::TYPE_KW,
"rspfUtmProjection",
true);
kwl.add(prefix,
rspfKeywordNames::ZONE_KW,
theHeaderInformation->theUtmZone,
true);
}
else
{
return rspfRefPtr<rspfImageGeometry>();
}
if(datum == rspfString("NAR") || datum == rspfString("4"))
{
kwl.add(prefix,
rspfKeywordNames::DATUM_KW,
"NAR-C", // North American Conus 1983
true);
}
else if(datum == rspfString("NAS") || datum == rspfString("1"))
{
kwl.add(prefix,
rspfKeywordNames::DATUM_KW,
"NAS-C", // North American Conus 1927
true);
}
else if(datum == rspfString("2"))
{
kwl.add(prefix,
rspfKeywordNames::DATUM_KW,
"WGD", // WGS 72
true);
}
else if(datum == rspfString("3"))
{
kwl.add(prefix,
rspfKeywordNames::DATUM_KW,
"WGE", // WGS 84
true);
}
else
{
return rspfRefPtr<rspfImageGeometry>();
}
kwl.add(prefix,
rspfKeywordNames::METERS_PER_PIXEL_X_KW,
theHeaderInformation->theGsd.x,
true);
kwl.add(prefix,
rspfKeywordNames::METERS_PER_PIXEL_Y_KW,
theHeaderInformation->theGsd.y,
true);
kwl.add(prefix,
rspfKeywordNames::TIE_POINT_EASTING_KW,
// theHeaderInformation->theUE + (theHeaderInformation->theGsd/2.0),
theHeaderInformation->theEasting,
true);
kwl.add(prefix,
rspfKeywordNames::TIE_POINT_NORTHING_KW,
// theHeaderInformation->theUN - (theHeaderInformation->theGsd/2.0),
theHeaderInformation->theNorthing,
true);
// Capture this for next time.
theGeometry = new rspfImageGeometry;
theGeometry->loadState(kwl, prefix);
// Set image things the geometry object should know about.
initImageParameters( theGeometry.get() );
return theGeometry;
}
return rspfRefPtr<rspfImageGeometry>();
}
//*******************************************************************
// Public method:
//*******************************************************************
ossimRefPtr<ossimImageGeometry> ossimAdrgTileSource::getImageGeometry()
{
if ( !theGeometry )
{
// Check for external geom:
theGeometry = getExternalImageGeometry();
if ( !theGeometry )
{
// origin of latitude
ossim_float64 originLatitude = (m_AdrgHeader->maxLatitude() +
m_AdrgHeader->minLatitude()) / 2.0;
// central meridian.
ossim_float64 centralMeridian = (m_AdrgHeader->maxLongitude() +
m_AdrgHeader->minLongitude()) / 2.0;
//---
// Compute the pixel size in latitude and longitude direction. This will
// be full image extents divided by full image lines and samples.
//---
// Samples in full image (used to compute degPerPixelX).
ossim_float64 samples = m_AdrgHeader->samples();
// Lines in full image (used to compute degPerPixelX).
ossim_float64 lines = m_AdrgHeader->lines();
// Degrees in latitude direction of the full image.
ossim_float64 degrees_in_lat_dir = m_AdrgHeader->maxLatitude() -
m_AdrgHeader->minLatitude();
// Degrees in longitude direction of the full image.
ossim_float64 degrees_in_lon_dir = m_AdrgHeader->maxLongitude() -
m_AdrgHeader->minLongitude();
ossim_float64 degPerPixelY = degrees_in_lat_dir / lines;
ossim_float64 degPerPixelX = degrees_in_lon_dir / samples;
//---
// The tie is determined with the following assumptions that need to be
// verified:
// 1) Rows and columns start at 1.
// 2) The min / max latitudes longitudes go to the edge of the pixel.
// 3) Latitude decreases by degPerPixelY with each line.
// 4) Longitude increases by degPerPixelX with each sample.
//---
ossim_float64 ul_lat = (m_AdrgHeader->maxLatitude() -
( (m_AdrgHeader->startRow() - 1) *
degPerPixelY ) - ( degPerPixelY * 0.5 ) );
ossim_float64 ul_lon = (m_AdrgHeader->minLongitude() +
( (m_AdrgHeader->startCol() -1) *
degPerPixelX ) + ( degPerPixelX * 0.5 ) );
// projection type
ossimKeywordlist kwl;
const char* prefix = 0;
kwl.add(prefix,
ossimKeywordNames::TYPE_KW,
"ossimEquDistCylProjection",
true);
// datum.
kwl.add(prefix,
ossimKeywordNames::DATUM_KW,
"WGE",
true);
// origin latitude
kwl.add(prefix,
ossimKeywordNames::ORIGIN_LATITUDE_KW,
originLatitude,
true);
// central meridin
kwl.add(prefix,
ossimKeywordNames::CENTRAL_MERIDIAN_KW,
centralMeridian,
true);
// Save the tie point.
kwl.add(prefix,
ossimKeywordNames::TIE_POINT_XY_KW,
ossimDpt(ul_lon, ul_lat).toString().c_str(),
true);
kwl.add(prefix,
ossimKeywordNames::TIE_POINT_UNITS_KW,
ossimUnitTypeLut::instance()->getEntryString(OSSIM_DEGREES),
true);
// Save the scale.
kwl.add(prefix,
ossimKeywordNames::TIE_POINT_LAT_KW,
ul_lat,
true);
kwl.add(prefix,
ossimKeywordNames::TIE_POINT_LON_KW,
ul_lon,
true);
// Save the scale.
kwl.add(prefix,
ossimKeywordNames::PIXEL_SCALE_XY_KW,
ossimDpt(degPerPixelX, degPerPixelY).toString().c_str(),
true);
kwl.add(prefix,
ossimKeywordNames::PIXEL_SCALE_UNITS_KW,
ossimUnitTypeLut::instance()->getEntryString(OSSIM_DEGREES),
true);
// lines
kwl.add(prefix,
ossimKeywordNames::NUMBER_LINES_KW,
getNumberOfLines());
// samples
kwl.add(prefix,
ossimKeywordNames::NUMBER_SAMPLES_KW,
getNumberOfSamples());
// res sets
kwl.add(prefix,
ossimKeywordNames::NUMBER_REDUCED_RES_SETS_KW,
getNumberOfDecimationLevels());
// bands
kwl.add(prefix,
ossimKeywordNames::NUMBER_INPUT_BANDS_KW,
getNumberOfInputBands());
// bands
kwl.add(prefix,
ossimKeywordNames::NUMBER_OUTPUT_BANDS_KW,
getNumberOfOutputBands());
if (traceDebug())
{
ossimNotify(ossimNotifyLevel_DEBUG)
<< "\nminLon: " << m_AdrgHeader->minLon()
<< "\nminLond: " << m_AdrgHeader->minLongitude()
<< "\nminLat: " << m_AdrgHeader->minLat()
<< "\nminLatd: " << m_AdrgHeader->minLatitude()
<< "\nmaxLon: " << m_AdrgHeader->maxLon()
<< "\nmaxLond: " << m_AdrgHeader->maxLongitude()
<< "\nmaxLat: " << m_AdrgHeader->maxLat()
<< "\nmaxLatd: " << m_AdrgHeader->maxLatitude()
<< "\nstartRow: " << m_AdrgHeader->startRow()
<< "\nstartCol: " << m_AdrgHeader->startCol()
<< "\nstopRow: " << m_AdrgHeader->stopRow()
<< "\nstopCol: " << m_AdrgHeader->stopCol()
<< "\nfull image lines: " << lines
<< "\nfull image samples: " << samples
<< "\nkwl:\n" << kwl
<< std::endl;
}
ossimProjection* new_proj = ossimProjectionFactoryRegistry::instance()->createProjection(kwl);
theGeometry = new ossimImageGeometry;
theGeometry->setProjection(new_proj); // assumes management of projection instance
} // matches (after getExternalImageGeometry()): if ( !theGeometry )
// Set image things the geometry object should know about.
initImageParameters( theGeometry.get() );
} // matches: if ( !theGeometry )
return theGeometry;
}
//*************************************************************************************************
// I know what I am. I am a Quickbird TIFF image. I may be standalone or tiled with row-column
// designation in the file name. My projection information is available (possibly) in an
// accompanying RPC file and/or internal TIF tag, and my transform info (sub-image offset) is
// available in a TILE info file (*.til) or internal TIF tag. Therefore, I (and not some outside
// factory) am best qualified for establishing my image geometry.
//*************************************************************************************************
ossimRefPtr<ossimImageGeometry> ossimQuickbirdTiffTileSource::getImageGeometry()
{
if ( !theGeometry )
{
//---
// Check factory for external geom:
//---
theGeometry = getExternalImageGeometry();
if ( !theGeometry )
{
theGeometry = new ossimImageGeometry();
// Fetch the tile info for this particular image:
if ( m_tileInfoFilename.size() )
{
ossimQuickbirdTile tileFile;
if ( tileFile.open(m_tileInfoFilename) )
{
ossimQuickbirdTileInfo info;
bool infoStatus = tileFile.getInfo(info, theImageFile.file().upcase());
if ( !infoStatus )
{
infoStatus = tileFile.getInfo(info, theImageFile.file().downcase());
}
if ( infoStatus )
{
// Establish sub-image offset (shift) for this tile:
ossimDpt shift(0,0);
if ((info.theUlXOffset != OSSIM_INT_NAN) && (info.theUlYOffset != OSSIM_INT_NAN))
shift = ossimIpt(info.theUlXOffset, info.theUlYOffset);
if(traceDebug())
{
ossimNotify(ossimNotifyLevel_DEBUG)
<< "ossimQuickbirdTiffTileSource::open() DEBUG:"
<< "\nSub image offset = " << shift << std::endl;
}
// Create the transform and set it in the geometry object:
ossimRefPtr<ossim2dTo2dTransform> transform =
new ossim2dTo2dShiftTransform(shift);
theGeometry->setTransform(transform.get());
// Next is the projection part of the image geometry. This should be available
// as an external RPC file or internal RPC's in the tiff file. Otherwise use
// the map projection specified in the
// tiff file:
theGeometry->setProjection(0);
ossimRefPtr<ossimQuickbirdRpcModel> model = new ossimQuickbirdRpcModel;
if (model->parseFile(theImageFile))
{
theGeometry->setProjection(model.get());
}
else
{
// Last resort to a projection factory:
ossimRefPtr<ossimProjection> proj =
ossimProjectionFactoryRegistry::instance()->createProjection(this);
if (proj.valid()) theGeometry->setProjection(proj.get());
}
}
// Set image things the geometry object should know about.
initImageParameters( theGeometry.get() );
}
}
}
}
return theGeometry;
}
ossimRefPtr<ossimImageGeometry> ossimGeneralRasterTileSource::getImageGeometry()
{
if ( !theGeometry.valid() )
{
// Check for external geom:
theGeometry = getExternalImageGeometry();
if ( !theGeometry.valid() )
{
theGeometry = new ossimImageGeometry();
ossimString ext = theImageFile.ext();
ossimFilename hdrFile = theImageFile;
ossimFilename xmlFile = theImageFile;
hdrFile = hdrFile.setExtension("hdr");
xmlFile = xmlFile.setExtension("xml");
if (hdrFile.exists())
{
ossimKeywordlist geoKwl;
ossimKeywordlist kwl(hdrFile, ' ');
kwl.downcaseKeywords();
ossim_uint32 lines = 0;
ossim_uint32 samples = 0;
ossim_float32 ll_lon = 0.0;
ossim_float32 ll_lat = 0.0;
ossim_float32 xCellSize = 1.0;
ossim_float32 yCellSize = 1.0;
const char* lookup = kwl.find("ncols");
if (lookup)
{
samples = ossimString(lookup).toUInt32();
geoKwl.add(ossimKeywordNames::NUMBER_SAMPLES_KW, samples);
}
lookup = kwl.find("nrows");
if (lookup)
{
lines = ossimString(lookup).toUInt32();
geoKwl.add(ossimKeywordNames::NUMBER_LINES_KW, lines);
}
lookup = kwl.find("cellsize");
if (lookup)
{
xCellSize = ossimString(lookup).toFloat32();
yCellSize = xCellSize;
geoKwl.add(ossimKeywordNames::DECIMAL_DEGREES_PER_PIXEL_LAT, yCellSize);
geoKwl.add(ossimKeywordNames::DECIMAL_DEGREES_PER_PIXEL_LON, xCellSize);
}
lookup = kwl.find("xdim");
if (lookup)
{
xCellSize = ossimString(lookup).toFloat32();
geoKwl.add(ossimKeywordNames::DECIMAL_DEGREES_PER_PIXEL_LON, xCellSize);
}
lookup = kwl.find("ydim");
if (lookup)
{
yCellSize = ossimString(lookup).toFloat32();
geoKwl.add(ossimKeywordNames::DECIMAL_DEGREES_PER_PIXEL_LAT, yCellSize);
}
lookup = kwl.find("xllcenter");
if (lookup)
{
ossim_float32 centerX = ossimString(lookup).toFloat32();
ll_lon = centerX + xCellSize * 0.5;
geoKwl.add(ossimKeywordNames::TIE_POINT_LON_KW, ll_lon);
}
lookup = kwl.find("yllcenter");
if (lookup)
{
ossim_float32 centerY = ossimString(lookup).toFloat32();
ll_lat = (centerY + (lines - 1) * yCellSize) + yCellSize * 0.5;
geoKwl.add(ossimKeywordNames::TIE_POINT_LAT_KW, ll_lat);
}
lookup = kwl.find("xllcorner");
if (lookup)
{
ll_lon = ossimString(lookup).toFloat32();
geoKwl.add(ossimKeywordNames::TIE_POINT_LON_KW, ll_lon);
}
lookup = kwl.find("yllcorner");
if (lookup)
{
ossim_uint32 centerY = ossimString(lookup).toFloat32();
ll_lat = centerY + lines * yCellSize;
geoKwl.add(ossimKeywordNames::TIE_POINT_LAT_KW, ll_lat);
}
lookup = kwl.find("ulxmap");
if (lookup)
{
ll_lon = ossimString(lookup).toFloat32();
geoKwl.add(ossimKeywordNames::TIE_POINT_LON_KW, ll_lon);
}
lookup = kwl.find("ulymap");
if (lookup)
{
ossim_uint32 centerY = ossimString(lookup).toFloat32();
ll_lat = centerY + lines * yCellSize;
geoKwl.add(ossimKeywordNames::TIE_POINT_LAT_KW, ll_lat);
}
kwl.add(ossimKeywordNames::ORIGIN_LATITUDE_KW, ll_lat);
geoKwl.add(ossimKeywordNames::TYPE_KW, "ossimEquDistCylProjection");
geoKwl.add(ossimKeywordNames::DATUM_KW, ossimDatumFactory::instance()->wgs84()->
code());
ossimRefPtr<ossimProjection> proj = ossimMapProjectionFactory::instance()->
createProjection(geoKwl);
if ( proj.valid() )
{
theGeometry->setProjection(proj.get());
}
}
else if (xmlFile.exists())
{
ossimFgdcXmlDoc file;
if ( file.open(xmlFile) )
{
ossimRefPtr<ossimProjection> proj = file.getProjection();
if ( !proj.valid() )
{
proj = file.getGridCoordSysProjection();
}
if ( proj.valid() )
{
theGeometry->setProjection(proj.get());
}
}
} // xml file exist...
} // Matches second if ( !theGeometry.valid() )
//---
// WARNING:
// Must have theGeometry at this point or the next call to
// ossimImageGeometryRegistry::extendGeometry will put us in an infinite loop
// as it does a recursive call back to ossimImageHandler::getImageGeometry().
//---
// Check for set projection.
if ( !theGeometry->getProjection() )
{
// Try factories for projection.
ossimImageGeometryRegistry::instance()->extendGeometry(this);
}
// Set image things the geometry object should know about.
initImageParameters( theGeometry.get() );
} // Matches first if ( !theGeometry.valid() )
return theGeometry;
}