void
brw_workaround_depthstencil_alignment(struct brw_context *brw)
{
   struct intel_context *intel = &brw->intel;
   struct gl_context *ctx = &intel->ctx;
   struct gl_framebuffer *fb = ctx->DrawBuffer;
   bool rebase_depth = false;
   bool rebase_stencil = false;
   struct intel_renderbuffer *depth_irb = intel_get_renderbuffer(fb, BUFFER_DEPTH);
   struct intel_renderbuffer *stencil_irb = intel_get_renderbuffer(fb, BUFFER_STENCIL);
   struct intel_mipmap_tree *depth_mt = NULL;
   struct intel_mipmap_tree *stencil_mt = get_stencil_miptree(stencil_irb);
   uint32_t tile_x = 0, tile_y = 0, stencil_tile_x = 0, stencil_tile_y = 0;
   uint32_t stencil_draw_x = 0, stencil_draw_y = 0;

   if (depth_irb)
      depth_mt = depth_irb->mt;

   uint32_t tile_mask_x, tile_mask_y;
   brw_get_depthstencil_tile_masks(depth_mt, stencil_mt,
                                   &tile_mask_x, &tile_mask_y);

   if (depth_irb) {
      tile_x = depth_irb->draw_x & tile_mask_x;
      tile_y = depth_irb->draw_y & tile_mask_y;

      /* According to the Sandy Bridge PRM, volume 2 part 1, pp326-327
       * (3DSTATE_DEPTH_BUFFER dw5), in the documentation for "Depth
       * Coordinate Offset X/Y":
       *
       *   "The 3 LSBs of both offsets must be zero to ensure correct
       *   alignment"
       */
      if (tile_x & 7 || tile_y & 7)
         rebase_depth = true;

      /* We didn't even have intra-tile offsets before g45. */
      if (intel->gen == 4 && !intel->is_g4x) {
         if (tile_x || tile_y)
            rebase_depth = true;
      }

      if (rebase_depth) {
         perf_debug("HW workaround: blitting depth level %d to a temporary "
                    "to fix alignment (depth tile offset %d,%d)\n",
                    depth_irb->mt_level, tile_x, tile_y);

         intel_renderbuffer_move_to_temp(intel, depth_irb);
         /* In the case of stencil_irb being the same packed depth/stencil
          * texture but not the same rb, make it point at our rebased mt, too.
          */
         if (stencil_irb &&
             stencil_irb != depth_irb &&
             stencil_irb->mt == depth_mt) {
            intel_miptree_reference(&stencil_irb->mt, depth_irb->mt);
            intel_renderbuffer_set_draw_offset(stencil_irb);
         }

         stencil_mt = get_stencil_miptree(stencil_irb);

         tile_x = depth_irb->draw_x & tile_mask_x;
         tile_y = depth_irb->draw_y & tile_mask_y;
      }

      if (stencil_irb) {
         stencil_mt = get_stencil_miptree(stencil_irb);
         intel_miptree_get_image_offset(stencil_mt,
                                        stencil_irb->mt_level,
                                        stencil_irb->mt_layer,
                                        &stencil_draw_x, &stencil_draw_y);
         int stencil_tile_x = stencil_draw_x & tile_mask_x;
         int stencil_tile_y = stencil_draw_y & tile_mask_y;

         /* If stencil doesn't match depth, then we'll need to rebase stencil
          * as well.  (if we hadn't decided to rebase stencil before, the
          * post-stencil depth test will also rebase depth to try to match it
          * up).
          */
         if (tile_x != stencil_tile_x ||
             tile_y != stencil_tile_y) {
            rebase_stencil = true;
         }
      }
   }

   /* If we have (just) stencil, check it for ignored low bits as well */
   if (stencil_irb) {
      intel_miptree_get_image_offset(stencil_mt,
                                     stencil_irb->mt_level,
                                     stencil_irb->mt_layer,
                                     &stencil_draw_x, &stencil_draw_y);
      stencil_tile_x = stencil_draw_x & tile_mask_x;
      stencil_tile_y = stencil_draw_y & tile_mask_y;

      if (stencil_tile_x & 7 || stencil_tile_y & 7)
         rebase_stencil = true;

      if (intel->gen == 4 && !intel->is_g4x) {
         if (stencil_tile_x || stencil_tile_y)
            rebase_stencil = true;
      }
   }

   if (rebase_stencil) {
      perf_debug("HW workaround: blitting stencil level %d to a temporary "
                 "to fix alignment (stencil tile offset %d,%d)\n",
                 stencil_irb->mt_level, stencil_tile_x, stencil_tile_y);

      intel_renderbuffer_move_to_temp(intel, stencil_irb);
      stencil_mt = get_stencil_miptree(stencil_irb);

      intel_miptree_get_image_offset(stencil_mt,
                                     stencil_irb->mt_level,
                                     stencil_irb->mt_layer,
                                     &stencil_draw_x, &stencil_draw_y);
      stencil_tile_x = stencil_draw_x & tile_mask_x;
      stencil_tile_y = stencil_draw_y & tile_mask_y;

      if (depth_irb && depth_irb->mt == stencil_irb->mt) {
         intel_miptree_reference(&depth_irb->mt, stencil_irb->mt);
         intel_renderbuffer_set_draw_offset(depth_irb);
      } else if (depth_irb && !rebase_depth) {
         if (tile_x != stencil_tile_x ||
             tile_y != stencil_tile_y) {
            perf_debug("HW workaround: blitting depth level %d to a temporary "
                       "to match stencil level %d alignment (depth tile offset "
                       "%d,%d, stencil offset %d,%d)\n",
                       depth_irb->mt_level,
                       stencil_irb->mt_level,
                       tile_x, tile_y,
                       stencil_tile_x, stencil_tile_y);

            intel_renderbuffer_move_to_temp(intel, depth_irb);

            tile_x = depth_irb->draw_x & tile_mask_x;
            tile_y = depth_irb->draw_y & tile_mask_y;

            if (stencil_irb && stencil_irb->mt == depth_mt) {
               intel_miptree_reference(&stencil_irb->mt, depth_irb->mt);
               intel_renderbuffer_set_draw_offset(stencil_irb);
            }

            WARN_ONCE(stencil_tile_x != tile_x ||
                      stencil_tile_y != tile_y,
                      "Rebased stencil tile offset (%d,%d) doesn't match depth "
                      "tile offset (%d,%d).\n",
                      stencil_tile_x, stencil_tile_y,
                      tile_x, tile_y);
         }
      }
   }

   if (!depth_irb) {
      tile_x = stencil_tile_x;
      tile_y = stencil_tile_y;
   }

   /* While we just tried to get everything aligned, we may have failed to do
    * so in the case of rendering to array or 3D textures, where nonzero faces
    * will still have an offset post-rebase.  At least give an informative
    * warning.
    */
   WARN_ONCE((tile_x & 7) || (tile_y & 7),
             "Depth/stencil buffer needs alignment to 8-pixel boundaries.\n"
             "Truncating offset, bad rendering may occur.\n");
   tile_x &= ~7;
   tile_y &= ~7;

   /* Now, after rebasing, save off the new dephtstencil state so the hardware
    * packets can just dereference that without re-calculating tile offsets.
    */
   brw->depthstencil.tile_x = tile_x;
   brw->depthstencil.tile_y = tile_y;
   brw->depthstencil.depth_offset = 0;
   brw->depthstencil.stencil_offset = 0;
   brw->depthstencil.hiz_offset = 0;
   brw->depthstencil.depth_mt = NULL;
   brw->depthstencil.stencil_mt = NULL;
   brw->depthstencil.hiz_mt = NULL;
   if (depth_irb) {
      depth_mt = depth_irb->mt;
      brw->depthstencil.depth_mt = depth_mt;
      brw->depthstencil.depth_offset =
         intel_region_get_aligned_offset(depth_mt->region,
                                         depth_irb->draw_x & ~tile_mask_x,
                                         depth_irb->draw_y & ~tile_mask_y,
                                         false);
      if (depth_mt->hiz_mt) {
         brw->depthstencil.hiz_mt = depth_mt->hiz_mt;
         brw->depthstencil.hiz_offset =
            intel_region_get_aligned_offset(depth_mt->region,
                                            depth_irb->draw_x & ~tile_mask_x,
                                            (depth_irb->draw_y & ~tile_mask_y) /
                                            2,
                                            false);
      }
   }
   if (stencil_irb) {
      stencil_mt = get_stencil_miptree(stencil_irb);

      brw->depthstencil.stencil_mt = stencil_mt;
      if (stencil_mt->format == MESA_FORMAT_S8) {
         /* Note: we can't compute the stencil offset using
          * intel_region_get_aligned_offset(), because stencil_region claims
          * that the region is untiled even though it's W tiled.
          */
         brw->depthstencil.stencil_offset =
            (stencil_draw_y & ~tile_mask_y) * stencil_mt->region->pitch +
            (stencil_draw_x & ~tile_mask_x) * 64;
      }
   }
}
Ejemplo n.º 2
0
void
brw_workaround_depthstencil_alignment(struct brw_context *brw,
                                      GLbitfield clear_mask)
{
   struct gl_context *ctx = &brw->ctx;
   struct gl_framebuffer *fb = ctx->DrawBuffer;
   bool rebase_depth = false;
   bool rebase_stencil = false;
   struct intel_renderbuffer *depth_irb = intel_get_renderbuffer(fb, BUFFER_DEPTH);
   struct intel_renderbuffer *stencil_irb = intel_get_renderbuffer(fb, BUFFER_STENCIL);
   struct intel_mipmap_tree *depth_mt = NULL;
   struct intel_mipmap_tree *stencil_mt = get_stencil_miptree(stencil_irb);
   uint32_t tile_x = 0, tile_y = 0, stencil_tile_x = 0, stencil_tile_y = 0;
   uint32_t stencil_draw_x = 0, stencil_draw_y = 0;
   bool invalidate_depth = clear_mask & BUFFER_BIT_DEPTH;
   bool invalidate_stencil = clear_mask & BUFFER_BIT_STENCIL;

   if (depth_irb)
      depth_mt = depth_irb->mt;

   /* Initialize brw->depthstencil to 'nop' workaround state.
    */
   brw->depthstencil.tile_x = 0;
   brw->depthstencil.tile_y = 0;
   brw->depthstencil.depth_offset = 0;
   brw->depthstencil.stencil_offset = 0;
   brw->depthstencil.hiz_offset = 0;
   brw->depthstencil.depth_mt = NULL;
   brw->depthstencil.stencil_mt = NULL;
   if (depth_irb)
      brw->depthstencil.depth_mt = depth_mt;
   if (stencil_irb)
      brw->depthstencil.stencil_mt = get_stencil_miptree(stencil_irb);

   /* Gen7+ doesn't require the workarounds, since we always program the
    * surface state at the start of the whole surface.
    */
   if (brw->gen >= 7)
      return;

   /* Check if depth buffer is in depth/stencil format.  If so, then it's only
    * safe to invalidate it if we're also clearing stencil, and both depth_irb
    * and stencil_irb point to the same miptree.
    *
    * Note: it's not sufficient to check for the case where
    * _mesa_get_format_base_format(depth_mt->format) == GL_DEPTH_STENCIL,
    * because this fails to catch depth/stencil buffers on hardware that uses
    * separate stencil.  To catch that case, we check whether
    * depth_mt->stencil_mt is non-NULL.
    */
   if (depth_irb && invalidate_depth &&
       (_mesa_get_format_base_format(depth_mt->format) == GL_DEPTH_STENCIL ||
        depth_mt->stencil_mt)) {
      invalidate_depth = invalidate_stencil && depth_irb && stencil_irb
         && depth_irb->mt == stencil_irb->mt;
   }

   uint32_t tile_mask_x, tile_mask_y;
   brw_get_depthstencil_tile_masks(depth_mt,
                                   depth_mt ? depth_irb->mt_level : 0,
                                   depth_mt ? depth_irb->mt_layer : 0,
                                   stencil_mt,
                                   &tile_mask_x, &tile_mask_y);

   if (depth_irb) {
      tile_x = depth_irb->draw_x & tile_mask_x;
      tile_y = depth_irb->draw_y & tile_mask_y;

      /* According to the Sandy Bridge PRM, volume 2 part 1, pp326-327
       * (3DSTATE_DEPTH_BUFFER dw5), in the documentation for "Depth
       * Coordinate Offset X/Y":
       *
       *   "The 3 LSBs of both offsets must be zero to ensure correct
       *   alignment"
       */
      if (tile_x & 7 || tile_y & 7)
         rebase_depth = true;

      /* We didn't even have intra-tile offsets before g45. */
      if (!brw->has_surface_tile_offset) {
         if (tile_x || tile_y)
            rebase_depth = true;
      }

      if (rebase_depth) {
         perf_debug("HW workaround: blitting depth level %d to a temporary "
                    "to fix alignment (depth tile offset %d,%d)\n",
                    depth_irb->mt_level, tile_x, tile_y);
         intel_renderbuffer_move_to_temp(brw, depth_irb, invalidate_depth);
         /* In the case of stencil_irb being the same packed depth/stencil
          * texture but not the same rb, make it point at our rebased mt, too.
          */
         if (stencil_irb &&
             stencil_irb != depth_irb &&
             stencil_irb->mt == depth_mt) {
            intel_miptree_reference(&stencil_irb->mt, depth_irb->mt);
            intel_renderbuffer_set_draw_offset(stencil_irb);
         }

         stencil_mt = get_stencil_miptree(stencil_irb);

         tile_x = depth_irb->draw_x & tile_mask_x;
         tile_y = depth_irb->draw_y & tile_mask_y;
      }

      if (stencil_irb) {
         stencil_mt = get_stencil_miptree(stencil_irb);
         intel_miptree_get_image_offset(stencil_mt,
                                        stencil_irb->mt_level,
                                        stencil_irb->mt_layer,
                                        &stencil_draw_x, &stencil_draw_y);
         int stencil_tile_x = stencil_draw_x & tile_mask_x;
         int stencil_tile_y = stencil_draw_y & tile_mask_y;

         /* If stencil doesn't match depth, then we'll need to rebase stencil
          * as well.  (if we hadn't decided to rebase stencil before, the
          * post-stencil depth test will also rebase depth to try to match it
          * up).
          */
         if (tile_x != stencil_tile_x ||
             tile_y != stencil_tile_y) {
            rebase_stencil = true;
         }
      }
   }

   /* If we have (just) stencil, check it for ignored low bits as well */
   if (stencil_irb) {
      intel_miptree_get_image_offset(stencil_mt,
                                     stencil_irb->mt_level,
                                     stencil_irb->mt_layer,
                                     &stencil_draw_x, &stencil_draw_y);
      stencil_tile_x = stencil_draw_x & tile_mask_x;
      stencil_tile_y = stencil_draw_y & tile_mask_y;

      if (stencil_tile_x & 7 || stencil_tile_y & 7)
         rebase_stencil = true;

      if (!brw->has_surface_tile_offset) {
         if (stencil_tile_x || stencil_tile_y)
            rebase_stencil = true;
      }
   }

   if (rebase_stencil) {
      perf_debug("HW workaround: blitting stencil level %d to a temporary "
                 "to fix alignment (stencil tile offset %d,%d)\n",
                 stencil_irb->mt_level, stencil_tile_x, stencil_tile_y);

      intel_renderbuffer_move_to_temp(brw, stencil_irb, invalidate_stencil);
      stencil_mt = get_stencil_miptree(stencil_irb);

      intel_miptree_get_image_offset(stencil_mt,
                                     stencil_irb->mt_level,
                                     stencil_irb->mt_layer,
                                     &stencil_draw_x, &stencil_draw_y);
      stencil_tile_x = stencil_draw_x & tile_mask_x;
      stencil_tile_y = stencil_draw_y & tile_mask_y;

      if (depth_irb && depth_irb->mt == stencil_irb->mt) {
         intel_miptree_reference(&depth_irb->mt, stencil_irb->mt);
         intel_renderbuffer_set_draw_offset(depth_irb);
      } else if (depth_irb && !rebase_depth) {
         if (tile_x != stencil_tile_x ||
             tile_y != stencil_tile_y) {
            perf_debug("HW workaround: blitting depth level %d to a temporary "
                       "to match stencil level %d alignment (depth tile offset "
                       "%d,%d, stencil offset %d,%d)\n",
                       depth_irb->mt_level,
                       stencil_irb->mt_level,
                       tile_x, tile_y,
                       stencil_tile_x, stencil_tile_y);

            intel_renderbuffer_move_to_temp(brw, depth_irb, invalidate_depth);

            tile_x = depth_irb->draw_x & tile_mask_x;
            tile_y = depth_irb->draw_y & tile_mask_y;

            if (stencil_irb && stencil_irb->mt == depth_mt) {
               intel_miptree_reference(&stencil_irb->mt, depth_irb->mt);
               intel_renderbuffer_set_draw_offset(stencil_irb);
            }

            WARN_ONCE(stencil_tile_x != tile_x ||
                      stencil_tile_y != tile_y,
                      "Rebased stencil tile offset (%d,%d) doesn't match depth "
                      "tile offset (%d,%d).\n",
                      stencil_tile_x, stencil_tile_y,
                      tile_x, tile_y);
         }
      }
   }

   if (!depth_irb) {
      tile_x = stencil_tile_x;
      tile_y = stencil_tile_y;
   }

   /* While we just tried to get everything aligned, we may have failed to do
    * so in the case of rendering to array or 3D textures, where nonzero faces
    * will still have an offset post-rebase.  At least give an informative
    * warning.
    */
   WARN_ONCE((tile_x & 7) || (tile_y & 7),
             "Depth/stencil buffer needs alignment to 8-pixel boundaries.\n"
             "Truncating offset, bad rendering may occur.\n");
   tile_x &= ~7;
   tile_y &= ~7;

   /* Now, after rebasing, save off the new dephtstencil state so the hardware
    * packets can just dereference that without re-calculating tile offsets.
    */
   brw->depthstencil.tile_x = tile_x;
   brw->depthstencil.tile_y = tile_y;
   if (depth_irb) {
      depth_mt = depth_irb->mt;
      brw->depthstencil.depth_mt = depth_mt;
      brw->depthstencil.depth_offset =
         intel_region_get_aligned_offset(depth_mt->region,
                                         depth_irb->draw_x & ~tile_mask_x,
                                         depth_irb->draw_y & ~tile_mask_y,
                                         false);
      if (intel_renderbuffer_has_hiz(depth_irb)) {
         brw->depthstencil.hiz_offset =
            intel_region_get_aligned_offset(depth_mt->region,
                                            depth_irb->draw_x & ~tile_mask_x,
                                            (depth_irb->draw_y & ~tile_mask_y) /
                                            2,
                                            false);
      }
   }
   if (stencil_irb) {
      stencil_mt = get_stencil_miptree(stencil_irb);

      brw->depthstencil.stencil_mt = stencil_mt;
      if (stencil_mt->format == MESA_FORMAT_S_UINT8) {
         /* Note: we can't compute the stencil offset using
          * intel_region_get_aligned_offset(), because stencil_region claims
          * that the region is untiled even though it's W tiled.
          */
         brw->depthstencil.stencil_offset =
            (stencil_draw_y & ~tile_mask_y) * stencil_mt->region->pitch +
            (stencil_draw_x & ~tile_mask_x) * 64;
      }
   }
}