void CaptureDSCapture::stop()
{
if (isCapturing()) {
HRESULT hr = m_pDSCapture->Stop();
mIsCapturing = false;
}
}
void CaptureBlackMagic::stop()
{
if (isCapturing()) {
fprintf(stderr,"stop capture\n");
camera->StopCapture();
cvReleaseImage(&mReturnFrame);
}
}
UINT MMCapture::run() {
for(;;) {
CaptureMessage message = m_messageQueue.get();
switch(message) {
case MESSAGE_STARTCAPTURE:
m_receiver.log(_T("handle MESSAGE_STARTCAPTURE\n"));
if(!isCapturing()) {
m_stopPending = false;
capCaptureSequenceNoFile(m_captureWindow);
}
break;
case MESSAGE_STOPCAPTURE :
m_receiver.log(_T("handle MESSAGE_STOPCAPTURE\n"));
m_stopPending = true;
break;
case MESSAGE_CAPTURESTOPPED:
m_receiver.log(_T("handle MESSAGE_CAPTURESTOPPED\n"));
m_capturing = false;
break;
case MESSAGE_TERMINATE :
m_receiver.log(_T("handle MESSAGE_TERMINATE\n"));
if(isCapturing()) {
m_receiver.log(_T("isCapturing = true. stopPending...\n"));
m_stopPending = true;
for(;;) {
if(m_messageQueue.get() == MESSAGE_CAPTURESTOPPED) {
m_receiver.log(_T("got MESSAGE_CAPTURESTOPPED. Now stop loop\n"));
m_capturing = false;
break;
}
}
}
return 0;
default:
showError(_T("%s:Unknown message in messageQueue:%d"), __TFUNCTION__,message);
exit(-1);
}
}
}
IplImage *CaptureBlackMagic::captureImage()
{
if (!isCapturing()) {
return NULL;
}
camera->readIplImage(mReturnFrame);
/* if (mCamera->RetrieveBuffer(mImage) == FlyCapture2::PGRERROR_OK) {
unsigned long length = mReturnFrame->widthStep * mYResolution;
memcpy(mReturnFrame->imageData, mImage->GetData(), length);
}*/
return mReturnFrame;
}
void VideoInput::releaseBufferCb(uint8_t* ptr)
{
std::lock_guard<std::mutex> lck(mutex_);
for(auto &buffer : buffers_) {
if (buffer.data == ptr) {
buffer.status = BUFFER_AVAILABLE;
if (!isCapturing())
freeOneBuffer(buffer);
break;
}
}
}
void KeyboardCallback(unsigned char key, int /*x*/, int /*y*/)
{
if (isCapturing())
{
captureStop(0);
}
else
{
handleKey(key);
}
//glutPostRedisplay();
}
int VideoSaverFlyCapture::startCapture() {
if (!isFlyCapture()) {
return VideoSaver::startCapture();
} else {
if ((isFinished()) && (isInit()) && (!isCapturing())) {
// start thread to begin capture and populate Mat frame
FlyCapture2::Error error = m_Camera.StartCapture();
if ( error == FlyCapture2::PGRERROR_ISOCH_BANDWIDTH_EXCEEDED )
{
std::cout << "Bandwidth exceeded" << std::endl;
return -1;
}
else if ( error != FlyCapture2::PGRERROR_OK )
{
std::cout << "Failed to start image capture" << std::endl;
return -1;
}
//start the grabbing thread
m_KeepWritingAlive = false; // not to be started
m_WritingFinished = true;
m_newFrameAvailable = false;
std::cout << "Start video grabbing .." << std::endl;
m_captureThread = new std::thread(&VideoSaverFlyCapture::captureThread,this);
m_capturing = true;
sleep(500);
waitForNewFrame();
return 0;
} else {
if (isInit()) {
std::cout << "Warning: capture not yet finished !" << std::endl;
} else {
std::cout << "Warning: camera not available!" << std::endl;
}
return -1;
}
}
}
IplImage *CaptureDSCapture::captureImage()
{
if (!isCapturing()) {
return NULL;
}
IplImage *ret = NULL;
if (WaitForSingleObject(next_event, 1000) == WAIT_OBJECT_0) {
EnterCriticalSection(&crit);
ret = mReturnFrame;
ret->origin = 1;
memcpy(imgBuffer,imgBufferForCallback,buffer_size);
LeaveCriticalSection(&crit);
}
return ret;
}
void CallbackPipeline::do_capture(JNIEnv *env) {
ENTER();
uvc_frame_t *frame;
uvc_frame_t *temp = get_frame(default_frame_size);
uvc_frame_t *callback_frame;
uint32_t width = 0, height = 0;
size_t sz = default_frame_size;
if (LIKELY(temp)) {
for (; isRunning() && isCapturing();) {
frame = waitCaptureFrame();
if ((LIKELY(frame))) {
if (UNLIKELY((width != frame->width) || (height != frame->height))) {
width = frame->width;
height = frame->height;
callbackPixelFormatChanged(width, height);
uvc_ensure_frame_size(temp, callbackPixelBytes);
sz = callbackPixelBytes;
}
if (mFrameCallbackObj) {
callback_frame = frame;
sz = frame->actual_bytes;
if (mFrameCallbackFunc) {
callback_frame = temp;
sz = callbackPixelBytes;
int b = mFrameCallbackFunc(frame, temp);
if (UNLIKELY(b)) {
LOGW("failed to convert to callback frame");
goto SKIP;
}
}
jobject buf = env->NewDirectByteBuffer(callback_frame->data, callbackPixelBytes);
env->CallVoidMethod(mFrameCallbackObj, iframecallback_fields.onFrame, buf);
env->ExceptionClear();
env->DeleteLocalRef(buf);
}
SKIP:
recycle_frame(frame);
}
}
recycle_frame(temp);
}
EXIT();
}
int UVCPreview::setFrameCallback(JNIEnv *env, jobject frame_callback_obj, int pixel_format) {
ENTER();
pthread_mutex_lock(&capture_mutex);
{
if (isRunning() && isCapturing()) {
mIsCapturing = false;
if (mFrameCallbackObj) {
pthread_cond_signal(&capture_sync);
pthread_cond_wait(&capture_sync, &capture_mutex); // wait finishing capturing
}
}
if (!env->IsSameObject(mFrameCallbackObj, frame_callback_obj)) {
iframecallback_fields.onFrame = NULL;
if (mFrameCallbackObj) {
env->DeleteGlobalRef(mFrameCallbackObj);
}
mFrameCallbackObj = frame_callback_obj;
if (frame_callback_obj) {
// get method IDs of Java object for callback
jclass clazz = env->GetObjectClass(frame_callback_obj);
if (LIKELY(clazz)) {
iframecallback_fields.onFrame = env->GetMethodID(clazz,
"onFrame", "(Ljava/nio/ByteBuffer;)V");
} else {
LOGW("failed to get object class");
}
env->ExceptionClear();
if (!iframecallback_fields.onFrame) {
LOGE("Can't find IFrameCallback#onFrame");
env->DeleteGlobalRef(frame_callback_obj);
mFrameCallbackObj = frame_callback_obj = NULL;
}
}
}
if (frame_callback_obj) {
mPixelFormat = pixel_format;
callbackPixelFormatChanged();
}
}
pthread_mutex_unlock(&capture_mutex);
RETURN(0, int);
}
void
VideoInput::releaseFrame(void *ptr)
{
std::lock_guard<std::mutex> lck(mutex_);
for(auto& buffer : buffers_) {
if (buffer.data == ptr) {
if (buffer.status != BUFFER_CAPTURING)
RING_ERR("Released a buffer with status %d, expected %d",
buffer.status, BUFFER_CAPTURING);
if (isCapturing()) {
buffer.status = BUFFER_FULL;
buffer.index = capture_index_++;
frame_cv_.notify_one();
} else {
freeOneBuffer(buffer);
}
break;
}
}
}
void QgsMapToolAddPart::cadCanvasReleaseEvent( QgsMapMouseEvent *e )
{
//check if we operate on a vector layer
QgsVectorLayer *vlayer = currentVectorLayer();
if ( !vlayer )
{
notifyNotVectorLayer();
return;
}
if ( !vlayer->isEditable() )
{
notifyNotEditableLayer();
return;
}
bool isGeometryEmpty = false;
QgsFeatureList selectedFeatures = vlayer->selectedFeatures();
if ( !selectedFeatures.isEmpty() && selectedFeatures.at( 0 ).geometry().isNull() )
isGeometryEmpty = true;
if ( !checkSelection() )
{
stopCapturing();
return;
}
int errorCode = 0;
switch ( mode() )
{
case CapturePoint:
{
QgsPoint layerPoint;
QgsPointXY mapPoint = e->mapPoint();
if ( nextPoint( QgsPoint( mapPoint ), layerPoint ) != 0 )
{
QgsDebugMsg( "nextPoint failed" );
return;
}
vlayer->beginEditCommand( tr( "Part added" ) );
errorCode = vlayer->addPart( QgsPointSequence() << layerPoint );
}
break;
case CaptureLine:
case CapturePolygon:
{
//add point to list and to rubber band
if ( e->button() == Qt::LeftButton )
{
int error = addVertex( e->mapPoint(), e->mapPointMatch() );
if ( error == 1 )
{
QgsDebugMsg( "current layer is not a vector layer" );
return;
}
else if ( error == 2 )
{
//problem with coordinate transformation
emit messageEmitted( tr( "Coordinate transform error. Cannot transform the point to the layers coordinate system" ), Qgis::Warning );
return;
}
startCapturing();
return;
}
else if ( e->button() != Qt::RightButton )
{
deleteTempRubberBand();
return;
}
if ( !isCapturing() )
return;
if ( mode() == CapturePolygon )
{
closePolygon();
}
//does compoundcurve contain circular strings?
//does provider support circular strings?
bool hasCurvedSegments = captureCurve()->hasCurvedSegments();
bool providerSupportsCurvedSegments = vlayer->dataProvider()->capabilities() & QgsVectorDataProvider::CircularGeometries;
QgsCurve *curveToAdd = nullptr;
if ( hasCurvedSegments && providerSupportsCurvedSegments )
{
curveToAdd = captureCurve()->clone();
}
else
{
curveToAdd = captureCurve()->curveToLine();
}
vlayer->beginEditCommand( tr( "Part added" ) );
if ( mode() == CapturePolygon )
{
//avoid intersections
QgsCurvePolygon *cp = new QgsCurvePolygon();
cp->setExteriorRing( curveToAdd );
QgsGeometry *geom = new QgsGeometry( cp );
geom->avoidIntersections( QgsProject::instance()->avoidIntersectionsLayers() );
const QgsCurvePolygon *cpGeom = qgsgeometry_cast<const QgsCurvePolygon *>( geom->constGet() );
if ( !cpGeom )
{
stopCapturing();
delete geom;
vlayer->destroyEditCommand();
return;
}
errorCode = vlayer->addPart( cpGeom->exteriorRing()->clone() );
delete geom;
}
else
{
errorCode = vlayer->addPart( curveToAdd );
}
stopCapturing();
}
break;
default:
Q_ASSERT( !"invalid capture mode" );
errorCode = 6;
break;
}
QString errorMessage;
switch ( errorCode )
{
case 0:
{
// remove previous message
emit messageDiscarded();
//add points to other features to keep topology up-to-date
bool topologicalEditing = QgsProject::instance()->topologicalEditing();
if ( topologicalEditing )
{
addTopologicalPoints( points() );
}
vlayer->endEditCommand();
vlayer->triggerRepaint();
if ( ( !isGeometryEmpty ) && QgsWkbTypes::isSingleType( vlayer->wkbType() ) )
{
emit messageEmitted( tr( "Add part: Feature geom is single part and you've added more than one" ), Qgis::Warning );
}
return;
}
case 1:
errorMessage = tr( "Selected feature is not multi part." );
break;
case 2:
errorMessage = tr( "New part's geometry is not valid." );
break;
case 3:
errorMessage = tr( "New polygon ring not disjoint with existing polygons." );
break;
case 4:
errorMessage = tr( "No feature selected. Please select a feature with the selection tool or in the attribute table" );
break;
case 5:
errorMessage = tr( "Several features are selected. Please select only one feature to which an island should be added." );
break;
case 6:
errorMessage = tr( "Selected geometry could not be found" );
break;
}
emit messageEmitted( errorMessage, Qgis::Warning );
vlayer->destroyEditCommand();
}
void MMCapture::saveAudioFrame(const WAVEHDR *audioHeader) {
if(isCapturing()) {
m_audioQueue.put(AudioQueueElement(audioHeader));
m_audioSampleCount += audioHeader->dwBytesRecorded / m_audioFormat.wBitsPerSample * 8;
}
}
void QgsMapToolAddPart::canvasReleaseEvent( QMouseEvent * e )
{
//check if we operate on a vector layer
QgsVectorLayer *vlayer = qobject_cast<QgsVectorLayer *>( mCanvas->currentLayer() );
if ( !vlayer )
{
notifyNotVectorLayer();
return;
}
if ( !vlayer->isEditable() )
{
notifyNotEditableLayer();
return;
}
//inform user at the begin of the digitising action that the island tool only works if exactly one feature is selected
int nSelectedFeatures = vlayer->selectedFeatureCount();
QString selectionErrorMsg;
if ( nSelectedFeatures < 1 )
{
selectionErrorMsg = tr( "No feature selected. Please select a feature with the selection tool or in the attribute table" );
}
else if ( nSelectedFeatures > 1 )
{
selectionErrorMsg = tr( "Several features are selected. Please select only one feature to which an part should be added." );
}
if ( !selectionErrorMsg.isEmpty() )
{
emit messageEmitted( tr( "Could not add part. %1" ).arg( selectionErrorMsg ), QgsMessageBar::WARNING );
stopCapturing();
return;
}
int errorCode;
switch ( mode() )
{
case CapturePoint:
{
QgsPoint layerPoint;
QgsPoint mapPoint;
if ( nextPoint( e->pos(), layerPoint, mapPoint ) != 0 )
{
QgsDebugMsg( "nextPoint failed" );
return;
}
vlayer->beginEditCommand( tr( "Part added" ) );
errorCode = vlayer->addPart( QList<QgsPoint>() << layerPoint );
}
break;
case CaptureLine:
case CapturePolygon:
{
//add point to list and to rubber band
if ( e->button() == Qt::LeftButton )
{
int error = addVertex( e->pos() );
if ( error == 1 )
{
QgsDebugMsg( "current layer is not a vector layer" );
return;
}
else if ( error == 2 )
{
//problem with coordinate transformation
emit messageEmitted( tr( "Coordinate transform error. Cannot transform the point to the layers coordinate system" ), QgsMessageBar::WARNING );
return;
}
startCapturing();
return;
}
else if ( e->button() != Qt::RightButton )
{
deleteTempRubberBand();
return;
}
if ( !isCapturing() )
return;
// we are now going to finish the capturing
if ( mode() == CapturePolygon )
{
//close polygon
closePolygon();
//avoid intersections
QgsGeometry* geom = QgsGeometry::fromPolygon( QgsPolygon() << points().toVector() );
if ( geom )
{
geom->avoidIntersections();
QgsPolygon poly = geom->asPolygon();
if ( poly.size() < 1 )
{
stopCapturing();
delete geom;
vlayer->destroyEditCommand();
return;
}
setPoints( geom->asPolygon()[0].toList() );
delete geom;
}
}
vlayer->beginEditCommand( tr( "Part added" ) );
errorCode = vlayer->addPart( points() );
stopCapturing();
}
break;
default:
Q_ASSERT( !"invalid capture mode" );
errorCode = 6;
break;
}
QString errorMessage;
switch ( errorCode )
{
case 0:
{
// remove previous message
emit messageDiscarded();
//add points to other features to keep topology up-to-date
int topologicalEditing = QgsProject::instance()->readNumEntry( "Digitizing", "/TopologicalEditing", 0 );
if ( topologicalEditing )
{
addTopologicalPoints( points() );
}
vlayer->endEditCommand();
mCanvas->refresh();
return;
}
case 1:
errorMessage = tr( "Selected feature is not multi part." );
break;
case 2:
errorMessage = tr( "New part's geometry is not valid." );
break;
case 3:
errorMessage = tr( "New polygon ring not disjoint with existing polygons." );
break;
case 4:
errorMessage = tr( "No feature selected. Please select a feature with the selection tool or in the attribute table" );
break;
case 5:
errorMessage = tr( "Several features are selected. Please select only one feature to which an island should be added." );
break;
case 6:
errorMessage = tr( "Selected geometry could not be found" );
break;
}
emit messageEmitted( errorMessage, QgsMessageBar::WARNING );
vlayer->destroyEditCommand();
}
void QgsMapToolFillRing::cadCanvasReleaseEvent( QgsMapMouseEvent * e )
{
//check if we operate on a vector layer
QgsVectorLayer *vlayer = qobject_cast<QgsVectorLayer *>( mCanvas->currentLayer() );
if ( !vlayer )
{
notifyNotVectorLayer();
return;
}
if ( !vlayer->isEditable() )
{
notifyNotEditableLayer();
return;
}
//add point to list and to rubber band
if ( e->button() == Qt::LeftButton )
{
int error = addVertex( e->mapPoint() );
if ( error == 1 )
{
//current layer is not a vector layer
return;
}
else if ( error == 2 )
{
//problem with coordinate transformation
emit messageEmitted( tr( "Cannot transform the point to the layers coordinate system" ), QgsMessageBar::WARNING );
return;
}
startCapturing();
}
else if ( e->button() == Qt::RightButton )
{
if ( !isCapturing() )
return;
deleteTempRubberBand();
closePolygon();
vlayer->beginEditCommand( tr( "Ring added and filled" ) );
QList< QgsPoint > pointList = points();
QgsFeatureId modifiedFid;
int addRingReturnCode = vlayer->addRing( pointList, &modifiedFid );
if ( addRingReturnCode != 0 )
{
QString errorMessage;
//todo: open message box to communicate errors
if ( addRingReturnCode == 1 )
{
errorMessage = tr( "a problem with geometry type occured" );
}
else if ( addRingReturnCode == 2 )
{
errorMessage = tr( "the inserted Ring is not closed" );
}
else if ( addRingReturnCode == 3 )
{
errorMessage = tr( "the inserted Ring is not a valid geometry" );
}
else if ( addRingReturnCode == 4 )
{
errorMessage = tr( "the inserted Ring crosses existing rings" );
}
else if ( addRingReturnCode == 5 )
{
errorMessage = tr( "the inserted Ring is not contained in a feature" );
}
else
{
errorMessage = tr( "an unknown error occured" );
}
emit messageEmitted( tr( "could not add ring since %1." ).arg( errorMessage ), QgsMessageBar::CRITICAL );
vlayer->destroyEditCommand();
}
else
{
// find parent feature and get it attributes
double xMin, xMax, yMin, yMax;
QgsRectangle bBox;
xMin = std::numeric_limits<double>::max();
xMax = -std::numeric_limits<double>::max();
yMin = std::numeric_limits<double>::max();
yMax = -std::numeric_limits<double>::max();
Q_FOREACH ( const QgsPoint& point, pointList )
{
xMin = qMin( xMin, point.x() );
xMax = qMax( xMax, point.x() );
yMin = qMin( yMin, point.y() );
yMax = qMax( yMax, point.y() );
}
bBox.setXMinimum( xMin );
bBox.setYMinimum( yMin );
bBox.setXMaximum( xMax );
bBox.setYMaximum( yMax );
QgsFeatureIterator fit = vlayer->getFeatures( QgsFeatureRequest().setFilterFid( modifiedFid ) );
QgsFeature f;
bool res = false;
if ( fit.nextFeature( f ) )
{
//create QgsFeature with wkb representation
QgsFeature* ft = new QgsFeature( vlayer->fields(), 0 );
ft->setGeometry( QgsGeometry::fromPolygon( QgsPolygon() << pointList.toVector() ) );
ft->setAttributes( f.attributes() );
if ( QApplication::keyboardModifiers() == Qt::ControlModifier )
{
res = vlayer->addFeature( *ft );
}
else
{
QgsAttributeDialog *dialog = new QgsAttributeDialog( vlayer, ft, false, NULL, true );
dialog->setIsAddDialog( true );
res = dialog->exec(); // will also add the feature
}
if ( res )
{
vlayer->endEditCommand();
}
else
{
delete ft;
vlayer->destroyEditCommand();
}
res = false;
}
}
stopCapturing();
}
void QgsMapToolAddRing::canvasReleaseEvent( QMouseEvent * e )
{
emit messageDiscarded();
//check if we operate on a vector layer
QgsVectorLayer *vlayer = qobject_cast<QgsVectorLayer *>( mCanvas->currentLayer() );
if ( !vlayer )
{
notifyNotVectorLayer();
return;
}
if ( !vlayer->isEditable() )
{
notifyNotEditableLayer();
return;
}
//add point to list and to rubber band
if ( e->button() == Qt::LeftButton )
{
int error = addVertex( e->pos() );
if ( error == 1 )
{
//current layer is not a vector layer
return;
}
else if ( error == 2 )
{
//problem with coordinate transformation
emit messageEmitted( tr( "Cannot transform the point to the layers coordinate system" ), QgsMessageBar::WARNING );
return;
}
startCapturing();
}
else if ( e->button() == Qt::RightButton )
{
if ( !isCapturing() )
return;
deleteTempRubberBand();
closePolygon();
vlayer->beginEditCommand( tr( "Ring added" ) );
int addRingReturnCode = vlayer->addRing( points() );
if ( addRingReturnCode != 0 )
{
QString errorMessage;
//todo: open message box to communicate errors
if ( addRingReturnCode == 1 )
{
errorMessage = tr( "a problem with geometry type occured" );
}
else if ( addRingReturnCode == 2 )
{
errorMessage = tr( "the inserted ring is not closed" );
}
else if ( addRingReturnCode == 3 )
{
errorMessage = tr( "the inserted ring is not a valid geometry" );
}
else if ( addRingReturnCode == 4 )
{
errorMessage = tr( "the inserted ring crosses existing rings" );
}
else if ( addRingReturnCode == 5 )
{
errorMessage = tr( "the inserted ring is not contained in a feature" );
}
else
{
errorMessage = tr( "an unknown error occured" );
}
emit messageEmitted( tr( "could not add ring since %1." ).arg( errorMessage ), QgsMessageBar::CRITICAL );
vlayer->destroyEditCommand();
}
else
{
vlayer->endEditCommand();
}
stopCapturing();
}
}
bool CaptureBlackMagic::start()
{
HRESULT result;
if (isCapturing()) {
return isCapturing();
}
{ /// CONNECTING TO ONE CAMERA AND START THE STREAM
/* Connect to the first DeckLink instance */
result = deckLinkIterator->Next(&deckLink);
if (result != S_OK)
{
fprintf(stderr, "No DeckLink PCI cards found.\n");
}
camera->initializeCamera(deckLink);
}
/* stringstream id(captureDevice().id());
id.setf(ios_base::hex, ios_base::basefield);
id >> mGUID.value[0]; id.get();
id >> mGUID.value[1]; id.get();
id >> mGUID.value[2]; id.get();
id >> mGUID.value[3];
if (mCamera->Connect(&mGUID) != FlyCapture2::PGRERROR_OK) {
return false;
}
FlyCapture2::VideoMode videoMode;
FlyCapture2::FrameRate frameRate;
if (mCamera->GetVideoModeAndFrameRate (&videoMode, &frameRate) != FlyCapture2::PGRERROR_OK) {
return false;
}
if (videoMode == FlyCapture2::VIDEOMODE_640x480RGB) {
mChannels = 3;
mXResolution = 640;
mYResolution = 480;
} else if (videoMode == FlyCapture2::VIDEOMODE_640x480Y8) {
mChannels = 1;
mXResolution = 640;
mYResolution = 480;
} else if (videoMode == FlyCapture2::VIDEOMODE_800x600RGB) {
mChannels = 3;
mXResolution = 800;
mYResolution = 600;
} else if (videoMode == FlyCapture2::VIDEOMODE_800x600Y8) {
mChannels = 1;
mXResolution = 800;
mYResolution = 600;
} else if (videoMode == FlyCapture2::VIDEOMODE_1024x768RGB) {
mChannels = 3;
mXResolution = 1024;
mYResolution = 768;
} else if (videoMode == FlyCapture2::VIDEOMODE_1024x768Y8) {
mChannels = 1;
mXResolution = 1024;
mYResolution = 768;
} else if (videoMode == FlyCapture2::VIDEOMODE_1280x960RGB) {
mChannels = 3;
mXResolution = 1280;
mYResolution = 960;
} else if (videoMode == FlyCapture2::VIDEOMODE_1280x960Y8) {
mChannels = 1;
mXResolution = 1280;
mYResolution = 960;
} else if (videoMode == FlyCapture2::VIDEOMODE_1600x1200RGB) {
mChannels = 3;
mXResolution = 1600;
mYResolution = 1200;
} else if (videoMode == FlyCapture2::VIDEOMODE_1600x1200Y8) {
mChannels = 1;
mXResolution = 1600;
mYResolution = 1200;
} else {
return false;
}
if (mCamera->StartCapture() != FlyCapture2::PGRERROR_OK) {
return false;
}
*/
mChannels = 3;
mXResolution = 1920;
mYResolution = 1080;
fprintf(stderr,"cvCreateImage(cvSize(mXResolution, mYResolution), IPL_DEPTH_8U, mChannels); %d %d \n",mXResolution, mYResolution);
mReturnFrame = cvCreateImage(cvSize(mXResolution, mYResolution), IPL_DEPTH_8U, mChannels);
mIsCapturing = true;
return isCapturing();
}
void QgsMapToolAddRing::cadCanvasReleaseEvent( QgsMapMouseEvent * e )
{
emit messageDiscarded();
//check if we operate on a vector layer
QgsVectorLayer *vlayer = currentVectorLayer();
if ( !vlayer )
{
notifyNotVectorLayer();
return;
}
if ( !vlayer->isEditable() )
{
notifyNotEditableLayer();
return;
}
//add point to list and to rubber band
if ( e->button() == Qt::LeftButton )
{
int error = addVertex( e->mapPoint() );
if ( error == 1 )
{
//current layer is not a vector layer
return;
}
else if ( error == 2 )
{
//problem with coordinate transformation
emit messageEmitted( tr( "Cannot transform the point to the layers coordinate system" ), QgsMessageBar::WARNING );
return;
}
startCapturing();
}
else if ( e->button() == Qt::RightButton )
{
if ( !isCapturing() )
return;
deleteTempRubberBand();
closePolygon();
vlayer->beginEditCommand( tr( "Ring added" ) );
//does compoundcurve contain circular strings?
//does provider support circular strings?
bool hasCurvedSegments = captureCurve()->hasCurvedSegments();
bool providerSupportsCurvedSegments = vlayer->dataProvider()->capabilities() & QgsVectorDataProvider::CircularGeometries;
QgsCurveV2* curveToAdd = 0;
if ( hasCurvedSegments && providerSupportsCurvedSegments )
{
curveToAdd = dynamic_cast<QgsCurveV2*>( captureCurve()->clone() );
}
else
{
curveToAdd = captureCurve()->curveToLine();
}
int addRingReturnCode = vlayer->addRing( curveToAdd );
if ( addRingReturnCode != 0 )
{
QString errorMessage;
//todo: open message box to communicate errors
if ( addRingReturnCode == 1 )
{
errorMessage = tr( "a problem with geometry type occured" );
}
else if ( addRingReturnCode == 2 )
{
errorMessage = tr( "the inserted ring is not closed" );
}
else if ( addRingReturnCode == 3 )
{
errorMessage = tr( "the inserted ring is not a valid geometry" );
}
else if ( addRingReturnCode == 4 )
{
errorMessage = tr( "the inserted ring crosses existing rings" );
}
else if ( addRingReturnCode == 5 )
{
errorMessage = tr( "the inserted ring is not contained in a feature" );
}
else
{
errorMessage = tr( "an unknown error occured" );
}
emit messageEmitted( tr( "could not add ring since %1." ).arg( errorMessage ), QgsMessageBar::CRITICAL );
vlayer->destroyEditCommand();
}
else
{
vlayer->endEditCommand();
}
stopCapturing();
}
}
bool Private_Impl::grab() {
if ( !isCapturing() ) return false;
callback_data.waitForFrame();
return true;
}