status_t SoftAVC::deInitDecoder() {
size_t i;
if (mMemRecords) {
iv_mem_rec_t *ps_mem_rec;
ps_mem_rec = mMemRecords;
for (i = 0; i < mNumMemRecords; i++) {
if (ps_mem_rec->pv_base) {
ivd_aligned_free(ps_mem_rec->pv_base);
}
ps_mem_rec++;
}
ivd_aligned_free(mMemRecords);
mMemRecords = NULL;
}
if (mFlushOutBuffer) {
ivd_aligned_free(mFlushOutBuffer);
mFlushOutBuffer = NULL;
}
mInitNeeded = true;
mChangingResolution = false;
return OK;
}
void SoftHEVC::onQueueFilled(OMX_U32 portIndex) {
UNUSED(portIndex);
if (mOutputPortSettingsChange != NONE) {
return;
}
List<BufferInfo *> &inQueue = getPortQueue(kInputPortIndex);
List<BufferInfo *> &outQueue = getPortQueue(kOutputPortIndex);
/* If input EOS is seen and decoder is not in flush mode,
* set the decoder in flush mode.
* There can be a case where EOS is sent along with last picture data
* In that case, only after decoding that input data, decoder has to be
* put in flush. This case is handled here */
if (mReceivedEOS && !mIsInFlush) {
setFlushMode();
}
while (!outQueue.empty()) {
BufferInfo *inInfo;
OMX_BUFFERHEADERTYPE *inHeader;
BufferInfo *outInfo;
OMX_BUFFERHEADERTYPE *outHeader;
size_t timeStampIx;
inInfo = NULL;
inHeader = NULL;
if (!mIsInFlush) {
if (!inQueue.empty()) {
inInfo = *inQueue.begin();
inHeader = inInfo->mHeader;
} else {
break;
}
}
outInfo = *outQueue.begin();
outHeader = outInfo->mHeader;
outHeader->nFlags = 0;
outHeader->nTimeStamp = 0;
outHeader->nOffset = 0;
if (inHeader != NULL && (inHeader->nFlags & OMX_BUFFERFLAG_EOS)) {
ALOGD("EOS seen on input");
mReceivedEOS = true;
if (inHeader->nFilledLen == 0) {
inQueue.erase(inQueue.begin());
inInfo->mOwnedByUs = false;
notifyEmptyBufferDone(inHeader);
inHeader = NULL;
setFlushMode();
}
}
// When there is an init required and the decoder is not in flush mode,
// update output port's definition and reinitialize decoder.
if (mInitNeeded && !mIsInFlush) {
bool portWillReset = false;
handlePortSettingsChange(&portWillReset, mNewWidth, mNewHeight);
CHECK_EQ(reInitDecoder(), (status_t)OK);
return;
}
/* Get a free slot in timestamp array to hold input timestamp */
{
size_t i;
timeStampIx = 0;
for (i = 0; i < MAX_TIME_STAMPS; i++) {
if (!mTimeStampsValid[i]) {
timeStampIx = i;
break;
}
}
if (inHeader != NULL) {
mTimeStampsValid[timeStampIx] = true;
mTimeStamps[timeStampIx] = inHeader->nTimeStamp;
}
}
{
ivd_video_decode_ip_t s_dec_ip;
ivd_video_decode_op_t s_dec_op;
WORD32 timeDelay, timeTaken;
size_t sizeY, sizeUV;
setDecodeArgs(&s_dec_ip, &s_dec_op, inHeader, outHeader, timeStampIx);
GETTIME(&mTimeStart, NULL);
/* Compute time elapsed between end of previous decode()
* to start of current decode() */
TIME_DIFF(mTimeEnd, mTimeStart, timeDelay);
IV_API_CALL_STATUS_T status;
status = ivdec_api_function(mCodecCtx, (void *)&s_dec_ip, (void *)&s_dec_op);
//Fixed
if ( mWidth != s_dec_op.u4_pic_wd || mHeight != s_dec_op.u4_pic_ht) {
ALOGE("mWidth %d, mHeight %d -> mNewWidth %d, mNewHeight %d", mWidth, mHeight, mNewWidth, mNewHeight);
if(mFlushOutBuffer) {
ivd_aligned_free(mFlushOutBuffer);
mFlushOutBuffer = NULL;
}
uint32_t bufferSize = s_dec_op.u4_pic_wd * s_dec_op.u4_pic_ht * 3 / 2;
mFlushOutBuffer = (uint8_t *)ivd_aligned_malloc(128, bufferSize);
if (NULL == mFlushOutBuffer) {
ALOGE("Could not allocate flushOutputBuffer of size %zu", bufferSize);
return;
}
ALOGE("re-alloc mFlushOutBuffer");
}
// FIXME: Compare |status| to IHEVCD_UNSUPPORTED_DIMENSIONS, which is not one of the
// IV_API_CALL_STATUS_T, seems be wrong. But this is what the decoder returns right now.
// The decoder should be fixed so that |u4_error_code| instead of |status| returns
// IHEVCD_UNSUPPORTED_DIMENSIONS.
bool unsupportedDimensions =
((IHEVCD_UNSUPPORTED_DIMENSIONS == status)
|| (IHEVCD_UNSUPPORTED_DIMENSIONS == s_dec_op.u4_error_code));
bool resChanged = (IVD_RES_CHANGED == (s_dec_op.u4_error_code & 0xFF));
GETTIME(&mTimeEnd, NULL);
/* Compute time taken for decode() */
TIME_DIFF(mTimeStart, mTimeEnd, timeTaken);
ALOGV("timeTaken=%6d delay=%6d numBytes=%6d", timeTaken, timeDelay,
s_dec_op.u4_num_bytes_consumed);
if (s_dec_op.u4_frame_decoded_flag && !mFlushNeeded) {
mFlushNeeded = true;
}
if ((inHeader != NULL) && (1 != s_dec_op.u4_frame_decoded_flag)) {
/* If the input did not contain picture data, then ignore
* the associated timestamp */
mTimeStampsValid[timeStampIx] = false;
}
// This is needed to handle CTS DecoderTest testCodecResetsHEVCWithoutSurface,
// which is not sending SPS/PPS after port reconfiguration and flush to the codec.
if (unsupportedDimensions && !mFlushNeeded) {
bool portWillReset = false;
handlePortSettingsChange(&portWillReset, s_dec_op.u4_pic_wd, s_dec_op.u4_pic_ht);
CHECK_EQ(reInitDecoder(), (status_t)OK);
setDecodeArgs(&s_dec_ip, &s_dec_op, inHeader, outHeader, timeStampIx);
ivdec_api_function(mCodecCtx, (void *)&s_dec_ip, (void *)&s_dec_op);
return;
}
// If the decoder is in the changing resolution mode and there is no output present,
// that means the switching is done and it's ready to reset the decoder and the plugin.
if (mChangingResolution && !s_dec_op.u4_output_present) {
mChangingResolution = false;
resetDecoder();
resetPlugin();
continue;
}
if (unsupportedDimensions || resChanged) {
mChangingResolution = true;
if (mFlushNeeded) {
setFlushMode();
}
if (unsupportedDimensions) {
mNewWidth = s_dec_op.u4_pic_wd;
mNewHeight = s_dec_op.u4_pic_ht;
mInitNeeded = true;
}
continue;
}
if ((0 < s_dec_op.u4_pic_wd) && (0 < s_dec_op.u4_pic_ht)) {
uint32_t width = s_dec_op.u4_pic_wd;
uint32_t height = s_dec_op.u4_pic_ht;
bool portWillReset = false;
handlePortSettingsChange(&portWillReset, width, height);
if (portWillReset) {
resetDecoder();
return;
}
}
if (s_dec_op.u4_output_present) {
outHeader->nFilledLen = (mWidth * mHeight * 3) / 2;
outHeader->nTimeStamp = mTimeStamps[s_dec_op.u4_ts];
mTimeStampsValid[s_dec_op.u4_ts] = false;
outInfo->mOwnedByUs = false;
outQueue.erase(outQueue.begin());
outInfo = NULL;
notifyFillBufferDone(outHeader);
outHeader = NULL;
} else {
/* If in flush mode and no output is returned by the codec,
* then come out of flush mode */
mIsInFlush = false;
/* If EOS was recieved on input port and there is no output
* from the codec, then signal EOS on output port */
if (mReceivedEOS) {
outHeader->nFilledLen = 0;
outHeader->nFlags |= OMX_BUFFERFLAG_EOS;
outInfo->mOwnedByUs = false;
outQueue.erase(outQueue.begin());
outInfo = NULL;
notifyFillBufferDone(outHeader);
outHeader = NULL;
resetPlugin();
}
}
}
// TODO: Handle more than one picture data
if (inHeader != NULL) {
inInfo->mOwnedByUs = false;
inQueue.erase(inQueue.begin());
inInfo = NULL;
notifyEmptyBufferDone(inHeader);
inHeader = NULL;
}
}
}