long
SpiFirstWrite(unsigned char *ucBuf, unsigned short usLength)
{
// workaround for first transaction
ASSERT_CS();
// 50 microsecond delay
jshDelayMicroseconds(50);
// SPI writes first 4 bytes of data
SpiWriteDataSynchronous(ucBuf, 4);
jshDelayMicroseconds(50);
SpiWriteDataSynchronous(ucBuf + 4, usLength - 4);
// From this point on - operate in a regular way
sSpiInformation.ulSpiState = eSPI_STATE_IDLE;
DEASSERT_CS();
jshDelayMicroseconds(10000);
return(0);
}
/** Reset one-wire, return true if a device was present */
static bool NO_INLINE OneWireReset(Pin pin) {
jshPinSetState(pin, JSHPINSTATE_GPIO_OUT_OPENDRAIN_PULLUP);
//jshInterruptOff();
jshPinSetValue(pin, 0);
jshDelayMicroseconds(500);
jshPinSetValue(pin, 1);
jshDelayMicroseconds(80);
bool hasDevice = !jshPinGetValue(pin);
//jshInterruptOn();
jshDelayMicroseconds(420);
return hasDevice;
}
/** Write 'bits' bits, and return what was read (to read, you must send all 1s) */
static JsVarInt NO_INLINE OneWireRead(Pin pin, int bits) {
jshPinSetState(pin, JSHPINSTATE_GPIO_OUT_OPENDRAIN_PULLUP);
JsVarInt result = 0;
JsVarInt mask = 1;
while (bits-- > 0) {
jshInterruptOff();
jshPinSetValue(pin, 0);
jshDelayMicroseconds(3);
jshPinSetValue(pin, 1);
jshDelayMicroseconds(10); // leave time to let it rise
if (jshPinGetValue(pin))
result = result | mask;
jshInterruptOn();
jshDelayMicroseconds(53);
mask = mask << 1;
}
return result;
}
/**
* \brief Set the value of the pin to be the value supplied and then wait for
* a given period and set the pin value again to be the opposite.
*/
void jshPinPulse(Pin pin, //!< The pin to be pulsed.
bool value, //!< The value to be pulsed into the pin.
JsVarFloat time //!< The period in milliseconds to hold the pin.
) {
if (jshIsPinValid(pin)) {
jshPinSetState(pin, JSHPINSTATE_GPIO_OUT);
jshPinSetValue(pin, value);
jshDelayMicroseconds(jshGetTimeFromMilliseconds(time));
jshPinSetValue(pin, !value);
} else
jsError("Invalid pin!");
} // End of jshPinPulse
void
SpiReadDataSynchronous(unsigned char *data, unsigned short size)
{
int bSend = 0, bRecv = 0;
while (bSend<size || bRecv<size) {
int r = jshSPISend(WLAN_SPI, (bSend<size)?READ:-1);
bSend++;
if (bSend>0 && r>=0) data[bRecv++] = r;
}
jshDelayMicroseconds(10); // because of final clock pulse
}
/** Write 'bits' bits, and return what was read (to read, you must send all 1s) */
static void NO_INLINE OneWireWrite(Pin pin, int bits, unsigned long long data) {
jshPinSetState(pin, JSHPINSTATE_GPIO_OUT_OPENDRAIN_PULLUP);
unsigned long long mask = 1;
while (bits-- > 0) {
if (data & mask) { // short pulse
jshInterruptOff();
jshPinSetValue(pin, 0);
jshDelayMicroseconds(10);
jshPinSetValue(pin, 1);
jshInterruptOn();
jshDelayMicroseconds(55);
} else { // long pulse
jshInterruptOff();
jshPinSetValue(pin, 0);
jshDelayMicroseconds(65);
jshPinSetValue(pin, 1);
jshInterruptOn();
jshDelayMicroseconds(5);
}
mask = mask << 1;
}
}
void SpiInit(void)
{
// SPI config
JshSPIInfo inf;
jshSPIInitInfo(&inf);
inf.pinSCK = WLAN_CLK_PIN;
inf.pinMISO = WLAN_MISO_PIN;
inf.pinMOSI = WLAN_MOSI_PIN;
inf.baudRate = 100000; // FIXME - just slow for debug
inf.spiMode = SPIF_SPI_MODE_1; // Mode 1 CPOL= 0 CPHA= 1
jshSPISetup(WLAN_SPI, &inf);
// WLAN CS, EN and WALN IRQ Configuration
jshSetPinStateIsManual(WLAN_CS_PIN, false);
jshPinOutput(WLAN_CS_PIN, 1); // de-assert CS
jshSetPinStateIsManual(WLAN_EN_PIN, false);
jshPinOutput(WLAN_EN_PIN, 0); // disable WLAN
jshSetPinStateIsManual(WLAN_IRQ_PIN, true);
jshPinSetState(WLAN_IRQ_PIN, JSHPINSTATE_GPIO_IN_PULLUP); // flip into read mode with pullup
// wait a little (ensure that WLAN takes effect)
jshDelayMicroseconds(500*1000); // force a 500ms delay! FIXME
}
void delay(int msec){
int boot = 0;
for ( ;boot<msec; boot++) {
jshDelayMicroseconds(1000);
}
}