/*JSON{
"type" : "method",
"class" : "SPI",
"name" : "setup",
"generate" : "jswrap_spi_setup",
"params" : [
["options","JsVar",["An optional structure containing extra information on initialising the SPI port","Please note that baud rate is set to the nearest that can be managed - which may be -+ 50%","```{sck:pin, miso:pin, mosi:pin, baud:integer=100000, mode:integer=0, order:'msb'/'lsb'='msb' }```","If sck,miso and mosi are left out, they will automatically be chosen. However if one or more is specified then the unspecified pins will not be set up.","You can find out which pins to use by looking at [your board's reference page](#boards) and searching for pins with the `SPI` marker.","The SPI ```mode``` is between 0 and 3 - see http://en.wikipedia.org/wiki/Serial_Peripheral_Interface_Bus#Clock_polarity_and_phase","On STM32F1-based parts, you cannot mix AF and non-AF pins (SPI pins are usually grouped on the chip - and you can't mix pins from two groups). Espruino will not warn you about this."]]
]
}
Set up this SPI port as an SPI Master.
*/
void jswrap_spi_setup(JsVar *parent, JsVar *options) {
IOEventFlags device = jsiGetDeviceFromClass(parent);
JshSPIInfo inf;
jsspiPopulateSPIInfo(&inf, options);
if (DEVICE_IS_SPI(device)) {
jshSPISetup(device, &inf);
#ifdef LINUX
if (jsvIsObject(options)) {
jsvUnLock(jsvObjectSetChild(parent, "path", jsvObjectGetChild(options, "path", 0)));
}
#endif
} else if (device == EV_NONE) {
// software mode - at least configure pins properly
if (inf.pinSCK != PIN_UNDEFINED)
jshPinSetState(inf.pinSCK, JSHPINSTATE_GPIO_OUT);
if (inf.pinMISO != PIN_UNDEFINED)
jshPinSetState(inf.pinMISO, JSHPINSTATE_GPIO_IN);
if (inf.pinMOSI != PIN_UNDEFINED)
jshPinSetState(inf.pinMOSI, JSHPINSTATE_GPIO_OUT);
} else return;
// Set up options, so we can initialise it on startup
if (options)
jsvUnLock(jsvSetNamedChild(parent, options, DEVICE_OPTIONS_NAME));
else
jsvRemoveNamedChild(parent, DEVICE_OPTIONS_NAME);
}
/*JSON{
"type" : "method",
"class" : "SPI",
"name" : "setup",
"generate" : "jswrap_spi_setup",
"params" : [
["options","JsVar",["An optional structure containing extra information on initialising the SPI port","Please note that baud rate is set to the nearest that can be managed - which may be -+ 50%","```{sck:pin, miso:pin, mosi:pin, baud:integer=100000, mode:integer=0, order:'msb'/'lsb'='msb' }```","If sck,miso and mosi are left out, they will automatically be chosen. However if one or more is specified then the unspecified pins will not be set up.","You can find out which pins to use by looking at [your board's reference page](#boards) and searching for pins with the `SPI` marker.","The SPI ```mode``` is between 0 and 3 - see http://en.wikipedia.org/wiki/Serial_Peripheral_Interface_Bus#Clock_polarity_and_phase","On STM32F1-based parts, you cannot mix AF and non-AF pins (SPI pins are usually grouped on the chip - and you can't mix pins from two groups). Espruino will not warn you about this."]]
]
}
Set up this SPI port as an SPI Master.
*/
void jswrap_spi_setup(
JsVar *parent, //!< The variable that is the class instance of this function.
JsVar *options //!< The options controlling SPI.
) {
//
// Design: The options variable is a JS Object which contains a series of settings. These
// settings are parsed by `jsspiPopulateSPIInfo` to populate a C structure of type
// `JshSPIInfo`.
//
// The options are also hung off the class instance variable in a property symbolically called
// DEVICE_OPTIONS_NAME ("_options").
//
IOEventFlags device = jsiGetDeviceFromClass(parent);
JshSPIInfo inf;
// Debug
// jsiConsolePrintf("jswrap_spi_setup called parent=%v, options=%v\n", parent, options);
jsspiPopulateSPIInfo(&inf, options);
if (DEVICE_IS_SPI(device)) {
jshSPISetup(device, &inf);
#ifdef LINUX
if (jsvIsObject(options)) {
jsvObjectSetChildAndUnLock(parent, "path", jsvObjectGetChild(options, "path", 0));
}
#endif
} else if (device == EV_NONE) {
// software mode - at least configure pins properly
if (inf.pinSCK != PIN_UNDEFINED)
jshPinSetState(inf.pinSCK, JSHPINSTATE_GPIO_OUT);
if (inf.pinMISO != PIN_UNDEFINED)
jshPinSetState(inf.pinMISO, JSHPINSTATE_GPIO_IN);
if (inf.pinMOSI != PIN_UNDEFINED)
jshPinSetState(inf.pinMOSI, JSHPINSTATE_GPIO_OUT);
} else return;
// Set up options, so we can initialise it on startup
if (options)
jsvUnLock(jsvSetNamedChild(parent, options, DEVICE_OPTIONS_NAME));
else
jsvRemoveNamedChild(parent, DEVICE_OPTIONS_NAME);
}
