void init_kernel()
{
terminal_initialize();
init_serial(COM1);
terminal_enable_serial_echo(COM1);
terminal_printf("fOS version %s\n\n\n", KERNEL_VERSION);
kinit(end + 4096, end + 4096 + (100 * 4096));
init_gdt();
load_gdt();
load_idt();
load_isrs();
irq_install();
asm volatile ( "sti" );
timer_install();
sleep(1);
keyboard_install();
init_paging();
switch_to_paging();
}
void kmain(multiboot_info_t* mbd, unsigned int magic){
// kernel entry point.
//unsigned char* videoram = (unsigned char*) 0xb8000;
//videoram[0] = 65;
//videoram[1] = 0x07;
//setMode(0x13);
setMode(320, 200, 8); // HOLY SHIT THIS WORKS
clrscr();
gdt_install();
idt_install();
isrs_install();
irq_install();
timer_install();
start_paging(mbd);
keyboard_install();
init_genrand(get_timer_ticks());
__asm__ __volatile__ ("sti");
kprint("Hello, We have booted successfully!\n\tTip: type help for command info\n");
while(1){
if(todo != NULL){
void(*function)() = todo;
function(todoCP);
todo = NULL;
}
}
}
int kmain(/*struct multiboot *mboot_ptr*/)
{
init_descriptor_tables();
keyboard_install();
initfs();
shell();
return 0xDEADBADA;
}
/*
* Called from boot.S, after global constructor
*/
void kernel_main(multiboot_info *mbt)
{
/*
* second argument is an 8 bit flag. low bit sets verbosity.
*/
boot_info(mbt,MB_DRIVE | MB_DEV);
printf ("Setting up Global Descriptor Table... ");
gdt_install();
puts ("OK");
printf ("Setting up Interrupt Descriptor Table... ");
idt_install();
puts ("OK");
printf ("Setting up IRQ... ");
irq_install();
puts ("OK");
printf ("Configuring system clock... ");
timer_install(100);
puts ("OK");
printf ("Enabling keyboard... ");
keyboard_install();
puts ("OK");
printf ("Enabling interrupts... ");
irq_enable();
if (irq_on()) {
puts ("OK");
} else {
abort();
}
/*
* Testing cr0 register
*/
uint32_t _cr0 = cr0();
printf("PE (Protection Enabled, lowest bit of cr0 register) set? 0x%lx, %s\n",
_cr0,_cr0&0x00000001?"yes":"no");
printf("Rho version %d.%d.%d booted\n",RHO_MAJOR,RHO_MINOR,RHO_PATCH);
checkAllBuses();
/*
* Wait until interrupted
*/
// mem_inspect(1024,1536);
while ( 1 ) {
/*
* Update the cursos position
*/
upd_c();
/*
* Wait for interrupts
*/
irq_wait();
}
/* */
}
void main()
{
gdt_install(3) ;
init_video(&sc) ;
idt_install() ;
isrs_install() ;
irq_install() ;
timer_install() ;
keyboard_install() ;
__asm__ __volatile__ ("sti");
int state = 0 ;
screen sc ;
//puts(&sc, "Hello world in new functions\n") ;
print_int(&sc, state) ;
/* Since there is no support for newlines in terminal_putchar yet, \n will
produce some VGA specific character instead. This is normal. */
}
int kernel_main(uint32_t esp) {
initial_esp = esp;
gdt_install();
idt_install();
isrs_install();
irq_install();
asm volatile("sti");
timer_install();
keyboard_install();
ASSERT(mboot_ptr != 0);
ASSERT(mboot_ptr->mods_count > 0);
uint32_t initrd_location = *((uint32_t*)mboot_ptr->mods_addr);
uint32_t initrd_end = *(uint32_t*)(mboot_ptr->mods_addr + 4);
// move the start of our kernel heap to past the initrd
placement_address = initrd_end;
initialize_paging();
initialize_tasking();
fs_root = initialize_initrd(initrd_location);
// Create a new process in a new address space which is a clone of this.
int ret = fork();
printf("fork() returned %x, ", ret);
printf(" getpid() returned %x\n", getpid());
printf("Loading initial ramdisk...\n");
asm volatile("cli");
traverse_initrd();
asm volatile("sti");
printf("That's all folks\n");
for(;;);
return 0;
}
void main(void)
{
gdt_install();
idt_install();
isrs_install();
irq_install();
timer_install();
keyboard_install();
mouse_install();
__asm__ __volatile__ ("sti");
clear_keyboard_buffers();
clear(BLACK,BLACK);
bscreen();
for (;;);
}
void kernel_main(){
console_initialize();
gdt_install();
idt_install();
isrs_install();
irq_install();
timer_install();
keyboard_install();
__asm__ __volatile__ ("sti");
console_putString("Hello, kernel World!\n");
for (;;){
}
}
void kmain ( void* mbd, unsigned int magic )
{
if ( magic != 0x2BADB002 )
{
/* there is something wrong */
}
else
{
clearscreen();
printline ("akv's - code is running");
gdt_install ();
idt_install ();
isrs_install ();
irq_install ();
__asm__ __volatile__ ("sti");
timer_install (2);
keyboard_install ();
for(;;);
}
}
void kmain( void* mbd, unsigned int magic )
{
/* Installations */
gdt_install();
idt_install();
isrs_install();
irq_install();
timer_install();
keyboard_install();
init_video();
__asm__ __volatile__ ("sti"); // Disable interrupts
settextcolor(0x0F, 0x00);
unsigned char string[] = "Welcome to Gulinux 0.01. For a list of commands, type help.\n";
putsa(string);
for(;;);
}
void kernel_main() {
gdt_install();
idt_install();
isrs_install();
irq_install();
terminal_initialize();
memory_manager_init();
enable_interrupts();
timer_install();
keyboard_install();
shell_init();
terminal_writestring("Hello, kernel World!\n");
terminal_writestring("Here is some text in a new line\n");
terminal_writestring("Here is some more text\n");
terminal_writestring("Here is a new line\n");
terminal_writestring("Here is some text after terminal scroll\n");
char str[] = "A string";
char ch = 'c';
int integer = 45;
printf("This is a test for printf.\nThis is a char %c and this a string %s\n", ch, str);
printf("This is an int %d. This is the same in hex %x\n", integer, integer);
for (size_t i = 0; i < 5; i++) {
printf("This is line number %d\n", i);
}
puts("waiting for 2 sec\n");
timer_wait(2);
puts("waiting complete\n");
char buffer[200];
gets(buffer);
printf("%s\n", buffer);
while(1) {
shell();
}
}
void boot(void)
{
// note: function changes rsp, local stack variables can't be practically used
register char *temp1, *temp2;
uint32_t* modulep;
void* physfree;
__asm__(
"movq %%rsp, %0;"
"movq %1, %%rsp;"
:"=g"(loader_stack)
:"r"(&stack[INITIAL_STACK_SIZE])
);
setup_tss();
reload_gdt();
reload_idt();
irq_install();
timer_install();
keyboard_install();
__asm__("sti");
modulep = (uint32_t*)((char*)(uint64_t)loader_stack[3] + (uint64_t)&kernmem - (uint64_t)&physbase);
physfree = (void*)(uint64_t)loader_stack[4];
kphysfree = physfree;
mm_phy_init(modulep);
vmmgr_init();
vmmgr_page_allocator_init();
cls();
scheduler_init();
/*start(
(uint32_t*)((char*)(uint64_t)loader_stack[3] + (uint64_t)&kernmem - (uint64_t)&physbase),
&physbase,
(void*)(uint64_t)loader_stack[4]
);*/
for(
temp1 = "!!!!! start() returned !!!!!", temp2 = (char*)0xb8000;
*temp1;
temp1 += 1, temp2 += 2
) *temp2 = *temp1;
while(1);
}
void main()
{
char *video_memory = (char *)0xb8000;
*video_memory = 'X';
some_function();
init_video();
idt_install();
isr_install();
irq_install();
timer_install();
keyboard_install();
__asm__ __volatile__ ("sti");
print("Hello World\n");
print("\n\tFrom Ajay Saini!\n");
// test : running of exception handlers
//print(20/0);
}
/* This is the entry point to the bulk of the kernel.
* @mb is a pointer to a <multiboot_info> structure which has important
* information about the layout of memory which is passed along from the
* bootloader.
* First, the kernel sets up the <gdt> or Global Descriptor Table which
* describes the layout of memory.
* Next, it installs the <idt> or interrupt descriptor table, which declares
* which interrupts are available, and whether they can be accessed from user
* mode.
* After the basic CPU state has been initialized, logging and the VGA terminal
* are initialized, and the kernel heap is installed. Next, the physical memory
* allocator and the keyboard drivers are initialized. Note that the kernel
* heap must be initialized before the physical memory allocator since certain
* parts of the allocator live on the heap. Finally the init process page table
* is created, and multi-processing is initialized.
* @return this function should never return.
*/
void kernel_main(struct multiboot_info *mb) {
gdt_install();
idt_install();
terminal_initialize();
initialize_klog();
kheap_install((struct kheap_metadata*)KHEAP_PHYS_ROOT, PAGE_SIZE);
physical_allocator_init(mb->mem_upper + mb->mem_lower);
keyboard_install();
char *hi = "Hello kernel!\n";
void *testing = kmalloc(16);
memcpy(testing, hi, 16);
kputs(testing);
klog(testing);
kfree(testing);
(void)kernel_page_table_install(mb);
proc_init();
struct process *worker_proc = create_proc(worker);
schedule_proc(worker_proc);
while (1) {
klog("kernel\n");
}
}
k_main() // like main
{
k_clear_screen();
k_puts("Welcome to MoOS version 0.1 (" BUILDTAG ")\n");
k_puts("\n");
if (pci_is_available())
{
k_puts(" Detected a PCI bus\n");
} else
{
k_puts(" No PCI bus detected\n");
}
// Try to find PCI devices
unsigned int i, j, k;
for (i=0; i<256; i++)
{
for (j=0; j<32; j++)
{
for (k=0; k<8; k++)
{
unsigned int temp = pci_read_dword(i, j, k, 0);
if ((temp & 0xffff) != 0xffff)
{
printk("PCI device on bus: %u, slot: %u, function: %u VendorId/DeviceId: %x\n", i, j, k, temp);
}
}
}
}
// NE2000 code
#define NS_DATAPORT 0x10 /* NatSemi-defined port window offset. */
#define NE_DATAPORT 0x10 /* NatSemi-defined port window offset. */
#define NS_RESET 0x1f /* Issue a read to reset, a write to clear. */
#define E8390_CMD 0x00 /* The command register (for all pages) */
#define E8390_STOP 0x01 /* Stop and reset the chip */
#define E8390_START 0x02 /* Start the chip, clear reset */
#define E8390_RREAD 0x08 /* Remote read */
#define E8390_NODMA 0x20 /* Remote DMA */
#define E8390_PAGE0 0x00 /* Select page chip registers */
#define E8390_PAGE1 0x40 /* using the two high-order bits */
#define E8390_PAGE2 0x80
#define E8390_PAGE3 0xC0 /* Page 3 is invalid on the real 8390. */
#define E8390_RXOFF 0x20 /* EN0_RXCR: Accept no packets */
#define E8390_TXOFF 0x02 /* EN0_TXCR: Transmitter off */
/* Page 0 register offsets. */
#define EN0_CLDALO 0x01 /* Low byte of current local dma addr RD */
#define EN0_STARTPG 0x01 /* Starting page of ring bfr WR */
#define EN0_CLDAHI 0x02 /* High byte of current local dma addr RD */
#define EN0_STOPPG 0x02 /* Ending page +1 of ring bfr WR */
#define EN0_BOUNDARY 0x03 /* Boundary page of ring bfr RD WR */
#define EN0_TSR 0x04 /* Transmit status reg RD */
#define EN0_TPSR 0x04 /* Transmit starting page WR */
#define EN0_NCR 0x05 /* Number of collision reg RD */
#define EN0_TCNTLO 0x05 /* Low byte of tx byte count WR */
#define EN0_FIFO 0x06 /* FIFO RD */
#define EN0_TCNTHI 0x06 /* High byte of tx byte count WR */
#define EN0_ISR 0x07 /* Interrupt status reg RD WR */
#define EN0_CRDALO 0x08 /* low byte of current remote dma address RD */
#define EN0_RSARLO 0x08 /* Remote start address reg 0 */
#define EN0_CRDAHI 0x09 /* high byte, current remote dma address RD */
#define EN0_RSARHI 0x09 /* Remote start address reg 1 */
#define EN0_RCNTLO 0x0a /* Remote byte count reg WR */
#define EN0_RCNTHI 0x0b /* Remote byte count reg WR */
#define EN0_RSR 0x0c /* rx status reg RD */
#define EN0_RXCR 0x0c /* RX configuration reg WR */
#define EN0_TXCR 0x0d /* TX configuration reg WR */
#define EN0_COUNTER0 0x0d /* Rcv alignment error counter RD */
#define EN0_DCFG 0x0e /* Data configuration reg WR */
#define EN0_COUNTER1 0x0e /* Rcv CRC error counter RD */
#define EN0_IMR 0x0f /* Interrupt mask reg WR */
#define EN0_COUNTER2 0x0f /* Rcv missed frame error counter RD */
unsigned char SA_prom[32];
struct {char value, offset; } program_seq[] = {
{E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
{0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */
{0x00, EN0_RCNTLO}, /* Clear the count regs. */
{0x00, EN0_RCNTHI},
{0x00, EN0_IMR}, /* Mask completion irq. */
{0xFF, EN0_ISR},
{E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */
{E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */
{32, EN0_RCNTLO},
{0x00, EN0_RCNTHI},
{0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */
{0x00, EN0_RSARHI},
{E8390_RREAD+E8390_START, E8390_CMD},
};
int wordlength = 2;
/* Read the 16 bytes of station address prom, returning 1 for
an eight-bit interface and 2 for a 16-bit interface.
We must first initialize registers, similar to NS8390_init(eifdev, 0).
We can't reliably read the SAPROM address without this.
(I learned the hard way!). */
for (i = 0; i < sizeof(program_seq)/sizeof(program_seq[0]); i++)
outportb(0x300 + program_seq[i].offset, program_seq[i].value);
for(i = 0; i < 32 /*sizeof(SA_prom)*/; i+=2) {
SA_prom[i] = inportb(0x300 + NE_DATAPORT);
SA_prom[i+1] = inportb(0x300 + NE_DATAPORT);
if (SA_prom[i] != SA_prom[i+1])
wordlength = 1;
}
printk("Station Address PROM 0:");
for(i = 0; i < sizeof(SA_prom)/2; i++)
printk(" %2.2x", SA_prom[i]);
printk("\nStation Address PROM %#2x:", i);
for(; i < sizeof(SA_prom); i++)
printk(" %2.2x", SA_prom[i]);
printk("\n");
printk("NE200 wordlength = %u\n", wordlength);
if (wordlength == 2) {
/* We must set the 8390 for word mode, AND RESET IT. */
int tmp;
outportb(0x300 + EN0_DCFG, 0x49);
tmp = inportb(0x300 + NS_RESET);
outportb(0x300 + NS_RESET, tmp);
/* Un-double the SA_prom values. */
for (i = 0; i < 16; i++)
SA_prom[i] = SA_prom[i+i];
}
// Check for NE2000 on I/O address 0x300
printk("MAC of NE2000 @0x300: ");
outportb(0x300 + E8390_CMD, E8390_NODMA + E8390_PAGE1);
for (i = 1; i < 6; i++)
printk("%2X:", inportb(0x300 + i));
printk("%2X\n");
// End of NE2000 code
init_pics(0x20, 0x28);
idt_install();
isrs_install();
irq_install();
keyboard_install();
asm volatile ("sti");
for(;;);
}
int window_init(window_t* window) { LOG
int error;
int i;
if (window->draw) {
/* initialize video */
if (!vg_init(window->video_mode)) {
printf("window_init: vg_init failed.\n");
return -1;
}
}
window->redraw = 0;
window->done = 0;
/* init font system */
error = vg_init_FreeType();
if (error) {
printf("window_init: vg_init_FreeType failed with error code %d.\n", error);
return error;
}
error = window_set_title(window, "cnix %s", "0.2");
if (error) {
printf("window_init: window_set_title failed with error code %d.\n", error);
return error;
}
error = window_set_log_message(window, "");
if (error) {
printf("window_init: window_set_log_message failed with error code %d.\n", error);
return error;
}
error = window_set_size(window, window->draw ? vg_get_h_res() : 1024, window->draw ? vg_get_v_res() : 768);
if (error) {
printf("window_init: window_set_size failed with error code %d.\n", error);
return error;
}
/* set up tabs */
window->current_tab = -1;
for (i = 0; i < TAB_COUNT; ++i)
window->tabs[i] = NULL;
//window->tabs[0] = tab_create("#1");
//window->tabs[1] = tab_create("#2");
//window->tabs[2] = tab_create("#3");
//window->tabs[3] = tab_create("#4");
//window->tabs[4] = tab_create("#5");
//window->tabs[5] = tab_create("#6");
//window->tabs[6] = tab_create("#7");
//window->tabs[7] = tab_create("#8");
//window->tabs[8] = tab_create("#9");
//window->tabs[9] = tab_create("#10");
//window->tabs[10] = tab_create("#11");
window->tabs[11] = tab_create("#console");
window->current_tab = TAB_CONSOLE;
window->prev_current_tab = window->current_tab;
window->date = NULL;
/* initialize interrupt handlers */
int_init();
/* install mouse */
error = window_install_mouse(window);
if (error) {
printf("window_init: window_install_mouse failed with error code %d.\n", error);
return error;
}
printf("window_install: mouse installed with success.\n");
/* install keyboard */
error = keyboard_install();
if (error) {
printf("window_init: keyboard_install failed with error code %d.\n", error);
return error;
}
printf("window_init: keyboard installed with success.\n");
/* set up buttons */
new_btn = new_button(869, 5, 20, 20, new_btn_draw, new_btn_click, 1, window);
open_btn = new_button(894, 5, 20, 20, open_btn_draw, open_btn_click, 1, window);
save_btn = new_button(919, 5, 20, 20, save_btn_draw, save_btn_click, 1, window);
make_btn = new_button(944, 5, 20, 20, make_btn_draw, make_btn_click, 1, window);
run_btn = new_button(969, 5, 20, 20, run_btn_draw, run_btn_click, 1, window);
close_btn = new_button(994, 5, 20, 20, close_btn_draw, close_btn_click, 1, window);
window->state = WIN_STATE_NORMAL;
return 0;
}
void KERNEL_CALL
os_main()
{
vga_install();
BRAG("Eve successfully switched to P-mode with paging enabled\n");
put_logo();
idt_install();
BRAG("ISRs & IRQs are on-line\n");
sys_call_table_install();
BRAG("System call table installed\n");
timer_install();
BRAG("PIT firing rate is %d Hz\n", _TIMER_RATE);
mm_install();
BRAG("Memory manager is installed\n", _TIMER_RATE);
//mm_print_info();
/*{
char* p;
SEPARATE
DBG_DUMP(p = sbrk(2));
DBG_DUMP(sbrk(0));
DBG_DUMP(*p);
DBG_DUMP(p[1]);
DBG_DUMP(p[4095]); // possable page fault
//DBG_DUMP(p[4096]); // page fault for sure
SEPARATE
DBG_DUMP(p = sbrk(4 * MEGABYTE));
DBG_DUMP(sbrk(0));
DBG_DUMP(p[0]);
DBG_DUMP(p[MEGABYTE]);
DBG_DUMP(p[4 * MEGABYTE]); // possable page fault
//DBG_DUMP(p[5 * MEGABYTE]); // page fault for sure
SEPARATE
DBG_DUMP(sbrk(-4 * MEGABYTE));
DBG_DUMP(p = sbrk(0));
DBG_DUMP(p[0]); // possable page fault
//DBG_DUMP(p[MEGABYTE]); // page fault for sure
DBG_DUMP(sbrk(-2));
DBG_DUMP(p = sbrk(0));
//DBG_DUMP(p[0]); // page fault for sure
}*/
/*{
char* p;
SEPARATE;
DUMP(sbrk(0));
DUMP(p = malloc(2));
DUMP(sbrk(0));
DUMP(*p);
DUMP(p[1]);
//DUMP(p[4095]); // possable page fault
//DUMP(p[4096]); // page fault for sure
char* q;
SEPARATE;
DUMP(q = malloc(4 * MEGABYTE));
DUMP(sbrk(0));
DUMP(q[0]);
DUMP(q[MEGABYTE]);
DUMP(q[4 * MEGABYTE]); // possable page fault
//DUMP(p[5 * MEGABYTE]); // page fault for sure
SEPARATE;
MARK(free(q));
DUMP(sbrk(0));
//DUMP(q[0]); // possable page fault
//DUMP(p[MEGABYTE]); // page fault for sure
MARK(free(p));
DUMP(sbrk(0));
//DUMP(p[0]); // page fault for sure
}*/
keyboard_install();
BRAG("Keyboard is on-line (US layout)\n");
// prepare tss segment
tss_install();
//BRAG("TSS is loaded\n");
// install resource manager before starting multitasking
rm_install();
// task manager
task_ring_node_t* pKernelNode = tm_install();
BRAG("Multitasking is enabled\n");
//print_task_tree();
// load shell app
gEshTaskOffset = (dword_t)&gKernelEnd;
tm_load_task((pointer_t) gEshTaskOffset, pKernelNode, ACC_USER, PRIOR_LOW, TRUE);
extern dword_t gNextTaskOffset;
gPingTaskOffset = gNextTaskOffset;
/* from this point on Kernel process will serve as a resources manager */
rm_start();
for (;;);
}
