void fill_lb_gpios(struct lb_gpios *gpios)
{
struct lb_gpio chromeos_gpios[] = {
{REC_SW, ACTIVE_LOW, read_gpio(REC_SW), "recovery"},
{WP_SW, ACTIVE_LOW, read_gpio(WP_SW), "write protect"},
{-1, ACTIVE_LOW, 1, "power"},
{-1, ACTIVE_LOW, 0, "lid"},
};
lb_add_gpios(gpios, chromeos_gpios, ARRAY_SIZE(chromeos_gpios));
}
void fill_lb_gpios(struct lb_gpios *gpios)
{
struct lb_gpio chromeos_gpios[] = {
{58, ACTIVE_HIGH, 0, "write protect"},
{-1, ACTIVE_HIGH, get_recovery_mode_switch(), "recovery"},
{-1, ACTIVE_HIGH, get_lid_switch(), "lid"},
{-1, ACTIVE_HIGH, 0, "power"},
{-1, ACTIVE_HIGH, gfx_get_init_done(), "oprom"},
};
lb_add_gpios(gpios, chromeos_gpios, ARRAY_SIZE(chromeos_gpios));
}
void fill_lb_gpios(struct lb_gpios *gpios)
{
struct lb_gpio chromeos_gpios[] = {
{GPIO_WP.id, ACTIVE_LOW,
!get_write_protect_state(), "write protect"},
{-1, ACTIVE_HIGH, get_recovery_mode_switch(), "recovery"},
{EC_IN_RW.id, ACTIVE_HIGH, -1, "EC in RW"},
{EC_IRQ.id, ACTIVE_LOW, -1, "EC interrupt"},
{CR50_IRQ.id, ACTIVE_HIGH, -1, "TPM interrupt"},
};
lb_add_gpios(gpios, chromeos_gpios, ARRAY_SIZE(chromeos_gpios));
}
void fill_lb_gpios(struct lb_gpios *gpios)
{
struct lb_gpio chromeos_gpios[] = {
{GPIO(R1), ACTIVE_LOW, gpio_get(GPIO(R1)), "write protect"},
{-1, ACTIVE_HIGH, get_recovery_mode_switch(), "recovery"},
{GPIO(R4), ACTIVE_HIGH, -1, "lid"},
{GPIO(Q0), ACTIVE_LOW, -1, "power"},
{GPIO(U4), ACTIVE_HIGH, -1, "EC in RW"},
{GPIO(I5), ACTIVE_LOW, -1, "reset"},
};
lb_add_gpios(gpios, chromeos_gpios, ARRAY_SIZE(chromeos_gpios));
}
void fill_lb_gpios(struct lb_gpios *gpios)
{
struct lb_gpio chromeos_gpios[] = {
{-1, ACTIVE_HIGH, get_write_protect_state(), "write protect"},
{-1, ACTIVE_HIGH, get_recovery_mode_switch(), "recovery"},
{-1, ACTIVE_HIGH, get_lid_switch(), "lid"},
{-1, ACTIVE_HIGH, 0, "power"},
{-1, ACTIVE_HIGH, gfx_get_init_done(), "oprom"},
{GPIO_EC_IN_RW, ACTIVE_HIGH,
gpio_get(GPIO_EC_IN_RW), "EC in RW"},
};
lb_add_gpios(gpios, chromeos_gpios, ARRAY_SIZE(chromeos_gpios));
}
void fill_lb_gpios(struct lb_gpios *gpios)
{
struct lb_gpio chromeos_gpios[] = {
{GPIO_SPI_WP, ACTIVE_HIGH,
get_gpio(GPIO_SPI_WP), "write protect"},
{GPIO_REC_MODE, ACTIVE_LOW,
get_recovery_mode_switch(), "recovery"},
{-1, ACTIVE_HIGH, 1, "lid"},
{-1, ACTIVE_HIGH, 0, "power"},
{-1, ACTIVE_HIGH, gfx_get_init_done(), "oprom"},
};
lb_add_gpios(gpios, chromeos_gpios, ARRAY_SIZE(chromeos_gpios));
}
void fill_lb_gpios(struct lb_gpios *gpios)
{
struct lb_gpio chromeos_gpios[] = {
{DEV_SW, DEV_POL, read_gpio(DEV_SW), "developer"},
{get_rec_sw_gpio_pin(), REC_POL,
read_gpio(get_rec_sw_gpio_pin()), "recovery"},
{get_wp_status_gpio_pin(), WP_POL,
read_gpio(get_wp_status_gpio_pin()), "write protect"},
{-1, ACTIVE_LOW, 1, "power"},
{-1, ACTIVE_LOW, 0, "lid"},
};
lb_add_gpios(gpios, chromeos_gpios, ARRAY_SIZE(chromeos_gpios));
}
void fill_lb_gpios(struct lb_gpios *gpios)
{
struct lb_gpio chromeos_gpios[] = {
{WRITE_PROTECT_L, ACTIVE_LOW,
gpio_get(WRITE_PROTECT_L), "write protect"},
{-1, ACTIVE_HIGH, get_recovery_mode_switch(), "recovery"},
{POWER_BUTTON, ACTIVE_LOW, -1, "power"},
{-1, ACTIVE_HIGH, get_developer_mode_switch(), "developer"},
{EC_IN_RW, ACTIVE_HIGH, -1, "EC in RW"},
{AP_SYS_RESET_L, ACTIVE_LOW, -1, "reset"},
};
lb_add_gpios(gpios, chromeos_gpios, ARRAY_SIZE(chromeos_gpios));
}
void fill_lb_gpios(struct lb_gpios *gpios)
{
struct lb_gpio chromeos_gpios[] = {
{GPIO_WP.raw, ACTIVE_HIGH, get_write_protect_state(),
"write protect"},
{-1, ACTIVE_HIGH, get_recovery_mode_switch(), "recovery"},
{GPIO_BACKLIGHT.raw, ACTIVE_HIGH, -1, "backlight"},
{GPIO_EC_IN_RW.raw, ACTIVE_HIGH, -1, "EC in RW"},
{GPIO_EC_IRQ.raw, ACTIVE_LOW, -1, "EC interrupt"},
{GPIO_RESET.raw, ACTIVE_HIGH, -1, "reset"},
};
lb_add_gpios(gpios, chromeos_gpios, ARRAY_SIZE(chromeos_gpios));
}
void fill_lb_gpios(struct lb_gpios *gpios)
{
struct lb_gpio chromeos_gpios[] = {
{GPIO_WP.raw, ACTIVE_LOW, gpio_get(GPIO_WP), "write protect"},
/* Note for early development, we want to support both servo
* and pushkey recovery buttons in firmware boot stages. */
{GPIO_RECOVERY_PUSHKEY.raw, ACTIVE_LOW,
!get_recovery_mode_switch(), "recovery"},
{GPIO_POWER.raw, ACTIVE_LOW, -1, "power"},
{-1, ACTIVE_HIGH, get_developer_mode_switch(), "developer"},
{GPIO_RESET.raw, ACTIVE_HIGH, -1, "reset"},
};
lb_add_gpios(gpios, chromeos_gpios, ARRAY_SIZE(chromeos_gpios));
}
void fill_lb_gpios(struct lb_gpios *gpios)
{
struct lb_gpio chromeos_gpios[] = {
/* Write Protect: GPIO48 */
{48, ACTIVE_LOW, !get_write_protect_state(), "write protect"},
/* Recovery: GPIO22 */
{22, ACTIVE_LOW, !get_recovery_mode_switch(), "recovery"},
/* Hard code the lid switch GPIO to open. */
{-1, ACTIVE_HIGH, 1, "lid"},
/* Power Button */
{-1, ACTIVE_HIGH, 0, "power"},
/* Did we load the VGA option ROM? */
{-1, ACTIVE_HIGH, gfx_get_init_done(), "oprom"},
};
lb_add_gpios(gpios, chromeos_gpios, ARRAY_SIZE(chromeos_gpios));
}
