static void tx51_leds_init(void)
{
int i;
for (i = 0 ; i < ARRAY_SIZE(tx51_leds) ; i++)
led_gpio_register(&tx51_leds[i]);
}
static int scb9328_devices_init(void)
{
int i;
imx_gpio_mode(PA23_PF_CS5);
imx_gpio_mode(GPIO_PORTB | GPIO_GPIO | GPIO_OUT | 21);
imx_gpio_mode(GPIO_PORTB | GPIO_GPIO | GPIO_OUT | 22);
imx_gpio_mode(GPIO_PORTB | GPIO_GPIO | GPIO_OUT | 23);
imx_gpio_mode(GPIO_PORTB | GPIO_GPIO | GPIO_OUT | 24);
for (i = 0; i < ARRAY_SIZE(leds); i++)
led_gpio_register(&leds[i]);
/* CS3 becomes CS3 by clearing reset default bit 1 in FMCR */
writel(0x1, MX1_SCM_BASE_ADDR + MX1_FMCR);
imx1_setup_eimcs(0, 0x000F2000, 0x11110d01);
imx1_setup_eimcs(1, 0x000F0a00, 0x11110601);
imx1_setup_eimcs(3, 0x000FFFFF, 0x00000303);
imx1_setup_eimcs(4, 0x000F0a00, 0x11110301);
imx1_setup_eimcs(5, 0x00008400, 0x00000D03);
add_cfi_flash_device(DEVICE_ID_DYNAMIC, 0x10000000, 16 * 1024 * 1024, 0);
add_dm9000_device(DEVICE_ID_DYNAMIC, 0x16000000, 0x16000004,
IORESOURCE_MEM_16BIT, &dm9000_data);
devfs_add_partition("nor0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self0");
devfs_add_partition("nor0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env0");
protect_file("/dev/env0", 1);
armlinux_set_bootparams((void *)0x08000100);
armlinux_set_architecture(MACH_TYPE_SCB9328);
return 0;
}
static void mini210s_led_init(void){
int i;
for (i = 0; i < ARRAY_SIZE(leds); i++) {
leds[i].active_low = 1;
gpio_direction_output(leds[i].gpio, leds[i].active_low);
led_gpio_register(&leds[i]);
}
}
static void __init ek_add_led(void)
{
if (machine_is_usb_a9263())
led.active_low = 1;
at91_set_gpio_output(led.gpio, led.active_low);
led_gpio_register(&led);
}
static int pcm043_devices_init(void)
{
uint32_t reg;
char *envstr;
unsigned long bbu_nand_flags = 0;
/* CS0: Nor Flash */
imx35_setup_weimcs(5, 0x22C0CF00, 0x75000D01, 0x00000900);
led_gpio_register(&led0);
reg = readl(MX35_CCM_BASE_ADDR + MX35_CCM_RCSR);
/* some fuses provide us vital information about connected hardware */
if (reg & 0x20000000)
nand_info.width = 2; /* 16 bit */
else
nand_info.width = 1; /* 8 bit */
imx35_add_fec(&fec_info);
/*
* This platform supports NOR and NAND
*/
imx35_add_nand(&nand_info);
/*
* Up to 32MiB NOR type flash, connected to
* CS line 0, data width is 16 bit
*/
add_cfi_flash_device(DEVICE_ID_DYNAMIC, MX35_CS0_BASE_ADDR, 32 * 1024 * 1024, 0);
switch (bootsource_get()) {
case BOOTSOURCE_NAND:
devfs_add_partition("nand0", 0x00000, SZ_512K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_512K, SZ_256K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
envstr = "NAND";
bbu_nand_flags = BBU_HANDLER_FLAG_DEFAULT;
break;
case BOOTSOURCE_NOR:
default:
devfs_add_partition("nor0", 0x00000, SZ_512K, DEVFS_PARTITION_FIXED, "self0"); /* ourself */
devfs_add_partition("nor0", SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env0"); /* environment */
protect_file("/dev/env0", 1);
envstr = "NOR";
break;
}
pr_info("using environment from %s flash\n", envstr);
imx35_add_fb(&ipu_fb_data);
armlinux_set_architecture(MACH_TYPE_PCM043);
imx_bbu_external_nand_register_handler("nand", "/dev/nand0.barebox",
bbu_nand_flags);
return 0;
}
static void __init ek_add_led(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(leds); i++) {
at91_set_gpio_output(leds[i].gpio, leds[i].active_low);
led_gpio_register(&leds[i]);
}
led_set_trigger(LED_TRIGGER_HEARTBEAT, &leds[0].led);
}
static void ek_device_add_leds(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(ek_leds); i++) {
at91_set_gpio_output(ek_leds[i].gpio, ek_leds[i].active_low);
led_gpio_register(&ek_leds[i]);
}
led_set_trigger(LED_TRIGGER_HEARTBEAT, &ek_leds[1].led);
}
static void usb_a9260_device_dab_mmx(void)
{
int i;
usb_a9260_keyboard_device_dab_mmx();
for (i = 0; i < ARRAY_SIZE(dab_mmx_leds); i++) {
dab_mmx_leds[i].active_low = 1;
at91_set_gpio_output(dab_mmx_leds[i].gpio, dab_mmx_leds[i].active_low);
led_gpio_register(&dab_mmx_leds[i]);
}
}
static int eukrea_cpuimx25_devices_init(void)
{
mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
ARRAY_SIZE(eukrea_cpuimx25_pads));
led_gpio_register(&led0);
imx25_iim_register_fec_ethaddr();
imx25_add_fec(&fec_info);
nand_info.width = 1;
imx25_add_nand(&nand_info);
devfs_add_partition("nand0", 0x00000, 0x40000,
DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", 0x40000, 0x20000,
DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
/* enable LCD */
gpio_direction_output(26, 1);
gpio_set_value(26, 1);
/* LED : default OFF */
gpio_direction_output(2 * 32 + 19, 1);
/* Switch : input */
gpio_direction_input(2 * 32 + 18);
imx25_add_fb(&eukrea_cpuimx25_fb_data);
imx25_add_i2c0(NULL);
imx25_add_mmc0(NULL);
#ifdef CONFIG_USB
imx25_usb_init();
add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, MX25_USB_OTG_BASE_ADDR + 0x400, NULL);
#endif
#ifdef CONFIG_USB_GADGET
/* Workaround ENGcm09152 */
writel(readl(MX25_USB_OTG_BASE_ADDR + 0x608) | (1 << 23), MX25_USB_OTG_BASE_ADDR + 0x608);
add_generic_device("fsl-udc", DEVICE_ID_DYNAMIC, NULL, MX25_USB_OTG_BASE_ADDR, 0x200,
IORESOURCE_MEM, &usb_pdata);
#endif
armlinux_set_bootparams((void *)0x80000100);
armlinux_set_architecture(MACH_TYPE_EUKREA_CPUIMX25SD);
return 0;
}
static void __init ek_add_led(void)
{
int i;
#ifdef CONFIG_AT91_HAVE_2MMC
leds[0].gpio = AT91_PIN_PB8;
leds[1].gpio = AT91_PIN_PB9;
#endif
for (i = 0; i < ARRAY_SIZE(leds); i++) {
at91_set_gpio_output(leds[i].gpio, leds[i].active_low);
led_gpio_register(&leds[i]);
}
led_set_trigger(LED_TRIGGER_HEARTBEAT, &leds[1].led);
}
void rpi_add_led(void)
{
int i;
struct gpio_led *l;
for (i = 0; i < ARRAY_SIZE(rpi_leds); i++) {
l = &rpi_leds[i];
if (gpio_is_valid(l->gpio))
led_gpio_register(l);
}
l = &rpi_leds[0];
if (gpio_is_valid(l->gpio))
led_set_trigger(LED_TRIGGER_HEARTBEAT, &l->led);
}
static int imx23_olinuxino_devices_init(void)
{
armlinux_set_architecture(MACH_TYPE_IMX233_OLINUXINO);
defaultenv_append_directory(defaultenv_imx233_olinuxino);
led_gpio_register(&led1);
led_set_trigger(LED_TRIGGER_HEARTBEAT, &led1.led);
add_generic_device("mxs_mci", DEVICE_ID_DYNAMIC, NULL, IMX_SSP1_BASE,
0x8000, IORESOURCE_MEM, &mci_pdata);
olinuxino_init_usb();
default_environment_path_set("/dev/disk0.1");
return 0;
}
static int tiny210_devices_init(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(pin_usage); i++)
s3c_gpio_mode(pin_usage[i]);
for (i = 0; i < ARRAY_SIZE(leds); i++) {
leds[i].active_low = 1;
gpio_direction_output(leds[i].gpio, leds[i].active_low);
led_gpio_register(&leds[i]);
}
armlinux_set_bootparams((void*)S3C_SDRAM_BASE + 0x100);
armlinux_set_architecture(MACH_TYPE_MINI210);
return 0;
}
static int tiny210_devices_init(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(pin_usage); i++)
s3c_gpio_mode(pin_usage[i]);
for (i = 0; i < ARRAY_SIZE(leds); i++) {
leds[i].active_low = 1;
gpio_direction_output(leds[i].gpio, leds[i].active_low);
led_gpio_register(&leds[i]);
}
led_set_trigger(LED_TRIGGER_HEARTBEAT, &leds[0].led);
armlinux_set_architecture(MACH_TYPE_MINI210);
return 0;
}
static int efikamx_late_init(void)
{
int i;
if (!of_machine_is_compatible("genesi,imx51-sb"))
return 0;
defaultenv_append_directory(defaultenv_efikasb);
for (i = 0; i < ARRAY_SIZE(leds); i++)
led_gpio_register(&leds[i]);
led_set_trigger(LED_TRIGGER_HEARTBEAT, &leds[0].led);
writew(0x0, MX51_WDOG_BASE_ADDR + 0x8);
imx51_bbu_internal_mmc_register_handler("mmc", "/dev/mmc1",
BBU_HANDLER_FLAG_DEFAULT);
armlinux_set_architecture(2370);
armlinux_set_revision(0x5100 | imx_silicon_revision());
return 0;
}
static void panda_led_init(void)
{
led_gpio_register(&panda_leds[0]);
led_set_trigger(LED_TRIGGER_HEARTBEAT, &panda_leds[0].led);
}
static void __init ek_add_led(void)
{
at91_set_gpio_output(led.gpio, led.active_low);
led_gpio_register(&led);
}
